Power Acoustik
POLJER ACOUSTIK®
Mobile Multimedia Entertainment System
PDN-626B
Operation Instructions
12:00 AM
qe A |
NAVI
LAT)
=
и |=. Л. 3
$ |
LL Ma E 300W 4CH DD Blustooth
Double DIN 6.2” widescreen color LCD monitor/receiver
With BT, Navigation system
Note:
Please read this operation instruction before using!
Familiarity with installation and operation procedures will help you
obtain the best performance from your new DVD-receiver!
CONTENTS
General Information..............ooooiiioiic e e eee 1
Safety notice ...........................eiieeien e e eee eee reee 2
ceo [- eee eee eee eee eee setae eases 3
Remote control operation..................................eee e 4
Panel picture function........................2..... ee eee 6
Main menu operation instruction... 7
Setup menu......................2.eeeeee e Re ee e eee 9
Swe-steering Wheel Control Sefting........................................ 12
Radio Operation............................ee.eeie eee ee 12
Media Playing—video/disc Form Playing... 13
Media Playing—audio/disc Form Playin............................. 14
Music Playing Menu..........................ee00ree eee, 15
Bluetooth Operation Menu............................2. e 16
Bluetooth Dialing..............................e.ieein ie e De 17
Bluetooth Phone Book.........................eeee..ee a, 18
Picture Menu...................... ercer eee 19
Trouble shooting.............................eeieeeeeie e ee eee 21
Map User Instruction................................ee e eee 24
GENERAL INFORMATION
Model No.
PDN-626B
General
features
Fixed front panel 6.2inch TFT screen with
800*480 high pixel
FM/AM two BAND Radio
DVD fully compatible with DVD/VCD/CD/MP3/
MPEG4/JPEG/WMA
Built-in Navigation
Front USB & SD reader support
Rear view camera
300W 4ch / Speaker output
Steering wheel control
AV Input &AV output
Rotary audio control
Built-in Bluetooth with A2DP function
TFT screen
800*480pixel
SD
64GB
USB
2.0
Power supply
DC 12.00 voltage
Max Output
300W 4ch / Speaker output
Working Temperature
-20°C~70°C
Size 96.5*170.5*144mm
Weight About 1.92kg
Compatible Media
Picture JPG/JPEG
Disc CD/CD-R/CD-RW/DVD/DVD-R/DVD+R/ DVD-RW/DVD+RW
Audio file APE-Monkey's/FLAC/MP2-MPEG/MP3/OGG-Voebis/AAC/M4A/WAV-PCM
MPEG/AC-3 MPEG-4 O
AVI
MPEG/AAC AVC X
MPEG/AAC MPEG-4 Visual O
MP4
AAC AVC X
Video file MPG MPEG/AC-3 MPEG-1/2 O
AAC AVC X
Cooker RealVideo1 X
RM .
Cooker RealVideo3 O
RMVB Cooker RealVideo3 O
SAFTY NOTICE
Please read and understand the following safety information before
operating this unit.
© The device is suitable for 12V power supply (requires grounding).
Do not connect it to 24V power supply in trucks or buses, or else it will
be damaged.
@ Please use genuine discs, instead of incompatible and poor discs,
or else it will damage the device or shorten the service life.
O without the guide of qualified personnel, do not replace the fuse,
or else it may damage the device or cause fire.
A Please follow the traffic laws and regulations and do not watch
program or operate the device when you are driving, to avoid
accidents (excluding passengers watching through rear monitor).
@ To ensure safety and operate the device normally, please ask
qualified personnel to install the device. do not disassemble or repair
the device without authorization, to avoid damage and accidents.
Please contact local car audio distributor for details.
O) Do not put the device in moist environment or water, to avoid
electric shock, damage and fire due to short circuit.
O The mechanical drive part of the monitor uses automatic precision
transmission component. Do not pull, push or rotate the device by
force or impact the TFT screen to avoid damaging the device.
@ Do not insert the audio plug of the vehicle into the master unit
directly. please convert with the dedicated end cable provided by our
company.
@ When install the unit, prevent metal objects falling into the master
unit from the vents to avoid short circuit and damaging the device.
Safety Statement
O For the safety of you and others, do not watch programs or operate
the device when you are driving. It is prohibited by the laws and
regulations.
@ The backing monitor function should be used as auxiliary means.
we are not responsible for any accidents occurred during backing.
ACCESSORIES
Please note that when you buy this unit, you can find all the following
parts in the gift box. And if not, please don’t hesitate to contact us to
get any of it.
Unit
Remote Control
Trim Ring/Touch Pen/Rubber Pillar
Mounting Strap/Release Key/
Mounting Sleeve
REMOTE CONTROL OPERATION
10
1. TURN ON/OFF key---
Turn ON/OFF the screen.
2.EJECT Key
Press to eject the Discs in
the unit. And press again to
insert the Disc if you do not
take out it.
3.OPEN key
4.MUTE key
Press to mute the unit and
press again to restore the
volume.
5.Play/Pause.
6.Direction and ENTER key
If there is a Disc with root list
menu,press direction key to
move up/down, and press
enter to confirm. Press left
to enter into file list. Right to
open the file.
7.MENU key
Press menu key to turn back
to the main interface of the
unit under any mode.
8.Under Disc/SD/USB mode,
press to choose previous/next
song. Under music list menu,
press to choose PRE/NEXT
page.
Under RADIO mode, press
to search frequency forward
/backward.
9.Take phone calls and hang
up phone calls.
10.Number key
Choose music by number key
under DISC/Radio mode.
REMOTE CONTROL OPERATION
11.MODE changing key
Press to change mode of the
unit between BT/AUX IN/AV
IN/Radio/MobileLink/DVD/SD/USB.
12.VOLUME UP/DOWN key
Press to volume up and volume
down under any mode.
13.DVD playing mode, press to go
into root list menu; VCD playing
mode, press to turn on/off PBC
function.
14 BAND: Radio mode, touch
to change between FM1/FM2/FM3
[AM1/AM2; press STOP and the
screen will show LOGO interface;
Delete function in BT calling mode.
15.FAST REVERSE/FAST FORWARD key
Under Disc playing mode, press
to fast play reverse/forward at the
speed of *2*4*8*16; under Radio
mode, press to search step by
step reverse/forward.
16.REPEAT key
Under DISC/SD/USB mode,press
to set the repeat mode: single,chapter,
all.
17.Under video playing mode, press
to check the video playing information
such as: playing time, name of the
song, total song etc..
18.Under DVD playing mode, press
to enter into title list menu.
19.EQ mode
Touch to set EQ mode. Touch
again to adjust EQ effectffect
20.Channel changing key:
under DVD/VCD multiple sound
effect video playing mode, press
to change channel(STEREO/LEFT
CHANNEL/RIGHT CHANNEL).
21.SUBTITLE changing key
Change the subtitle during playing
if the Disc have multiple subtitle.
PANEL PICTURE FUNCTION
7
=
2 rm РОМ-626В
— LJ | | Е) 8)
—]
WS <=
3 ODE
4 —
> NAVI
GPS
AUX
6 —
na
¥ 2 ь
=
1.MIC receive hole
Place to receive the signal of microphone.
2.Eject key
When there is a Disc in the unit, press EJECT to remove the Disc. And
press again to insert the Disc if you do not take out it.
3.MODE key
Press to select system mode (Radio/BT/A2DP/Disc/Video/Music/
AUXIN/Avin 2/Camera/NAV)
4. TURN ON/OFF & VOLUNE UP/DOWN
Long touch to turn ON/OFF the unit. Short touch to activate the MUTE
function and silence the audio output. Touch again to restore sound.
Rotate to adjust the output volume UP or DOWN.
5.NAVI key
Press to enter into GPS function
6.0pen to see GPS card slot, AUX IN jack, SD slot, USB port and
reset.
MAIN MENU OPERATION INSTRUCTION
Main menu 1
3 1 4
12:00 AM
a A Radio
M mu о
5 |= Л 3
6 2 7
1.Shows the present time of the unit.
2.Slide to choose between main menu 1 and main menu 2.
3. NAVI: Navigation Interface 4. Radio Interface
9 Slag vege we | A Radio 1230PM EOEE-
Ия ' MOT y + e: PTY:Rock PS:Today's Hit Music
= au 1 aL т MHZ >
[SPEED] | 06 :
a Mer 875 885 891 1015 |1051 | 1065
= Arrival Time | | | | |
Back | W Tropicana Ave [593] | 7 9:12am
BAND | SCAN 4 LODX 3 AS/PS | RBDS
5. Video Interface 6. Music Interface
12:30 РМ FO ===
fp BCFA Le
© Other
£ Aqua
[veel
# Bluetooth
Bluetooth
MAIN MENU OPERATION INSTRUCTION
Main menu 2 1 2 3
Picture
4 Setup
1. AUX IN Interface 2. Dimmer Interface
Press dimmer to set low, middle
and high lightening.
3. Picture Interface 4. AUX IN Interface
ñ Picture 12:30 PM
5. BT Music Interface 6. Setup Interface
A BT Music 12:30PM EO=S- A Navigation Pal,
X} General Navi Vo | on @
| Voice Mix
© video
| Ц JJ Daniel Powter
© Daniel Powter
@© navi MM Navi cardiVoiceBNDNav.exe
© Clock
EEG
O) System
г. E
E J
Fy A Free Loop
14 ST SB
SETUP MENU
There are five menu in setup:
GENERAL SETUP—Menu 1
A General
LO y General
E Video |
Beep
МАМ Radio Region
O clock Wallpaper
SWC
ООС N
==- Audio
@ system
1.Setup function area: General setup, Clock setup, Audio setup,
Video setup, Other setup.
2.Subsidiary function area: Press to see the general setup items.
a.Beep sound: ON/OFF.
b.Touch to choose radio field between.
c.Touch to set wallpaper as you want from the 5 wallpapers storage of
the system.
d.Press to enter into steering wheel control settings.
CLOCK SETUP -Menu 2
A Video
| LO) General
© Video
Camera Mirror Inage
AEN! Reverse Camera
© Clock Backlight
- | DVD Parent Lock
=== Audio
@ system
On vo
a.Touch to turn on or turn off the camera mirroring function.
b.Touch to turn on or turn off the reverse camera function.
c.Press to adjust the backlight:1 to 10.
d.Touch to set up the level of the DVD. Default password is 000000.
NAVIGATION SETUP
NAVIGATION SETUP--Menu 3
A Navigation 12:30 PM
OB (
Navi Voice Mix
@® video
@ Navi card\Voice\BNDNav. b
© Clock
==_ Audio
O, System
a. Turn on or turn off the navigation voice plug function. Turn on, once
report navigation information and also have audio source playing.
Turn off, there is only navigation voice.
b.Press to go into navigation path setup menu:
It will show the usable navigation program and choose to set as the r
unning program.
CLOCK SETUP--Menu 4
A Clock AM 12:12
Lt General GI __ cmT-08:00 | а
Meal —— —
PA
© \чео Г
NAVI НЕ о
Ле oe oe [oz 1 42.
==- Audio
@ System b
С
a.Choose time zone according to your local place;
b.Choose AM or PM according to your current time;
c.Choose daylight savings ON/OFF according your local place time.
AUDIO SETUP--Menu 5
A
Fo General
QQ Video
Equalizer
Da
NAVI Audio Control
© Clock
==. Audio
O, System
10
SYSTEM SETUP
a.Press to enter into EQ set up menu.
Move up and down to choose the audio playing mode:
USER/JAZZ/CLASSIC/ROCK/POP/LIVE/DANCE. And USER is the
default mode.
A Equalizer 2
CLASSIC
Ve
| +14 dB
JAZZ
UST 4 Е
ROCK
pop -14 dB
32 625 125 250 500 1K 2K 4K 8K 16K
b.Press to enter into Audio Control set up menu.
A Audio Control
1
Loudness Wie 2
Subwoofer [ )oF 3
1.Reverb: Close/ Living room/Hall/Concert/Cave/Bathroom/Arena
2.Loudness: ON/OFF.
3.Subwoofer: ON/OFF.
SYSTEM SETUP--Menu 6
A sys Info 12:30 PM
| | | Calibration в 1
Factory Setting 2
| a ersion
NAVI LIT NA
@ Clock - = 5 ! а 5 3
==- Audio
@ System Sys Update
1.Touch to start calibration function to make the touch feeling in the
screen more accurate.
2.Touch to set the system to the factory shipping system mode.
3.The software version of this unit.
11
SWC-STEERING WHEEL CONTROL SETTING
Set the POWER button as an example.
1.Press to enter into SWC menu Picture 1.
2.Press POWER button in the unit, then press key in your steering wheel.
You can see the reminder in the unit like Picture 2. Press OK.
3.Setting successfully. Will show like Picture 3.
Picture 1 Picture 2
oan MODE
MUTE MENU
ease press SWC POWER" Key
VOLUME+ On | SEEK+
VOLUME- a VOLUME- SEEK-
Successfull binding
OK
VOLUME-
This is set by SWC1, if you cannot finish all button pairing, you can use
SWC2/SWC$3 too.lt will erase memory if you press SWC2/3 during you
are setting SWC1.
RADIO OPERATION
87.5 88.5 89.1 101.5 (105.1 | 106.5 6
¿| e O оо
BAND SCAN < LO/DX > AS/PS 'RBDS
7 8 9 1110 12 13
12
MEDIA PLAYING—VIDEO/DISC FORM PLAYING
1.Shows the present mode. Press to turn back to the main menu.
2.EQ: Can press to set the audio effect.
3.PTY: Program type; PS: Program service.
4.Short press to search backward.
5.Short press to search forward.
6.Radio frequency saving area: can save 18 frequencies and can only
show 6 in a page, slide it to see the rest.
7.B.and changing: Click to change between FM 1/FM2/FM3/AM1/AM2
8.Search the frequencies, play the searched one for 5S and go on to
search next one and repeat this.
9.Long press to move backward in step.
10.Long press to move forward in step.
11.LO/DX: Touch to select Local or Distant broadcasting frequencies.
12.Change between AS and PS.
13. RBDS: Touch to enter RBDS setup menu. You can choose the
program type you like to listen: news, sport, Info,etc.
MEDIA PLAYING—VIDEO/DISC FORM PLAYING
12:30 PM
= 1
3
1.Function Area: show the process and time of the present video.
This bar will disappear in a while, and click this area to show this
function bar again. Touch the bar to set the playing time.
a. Click to adjust:4:3/16:9
2.Click to show the information of present video.
3.Function bar same as audio playing menu.
NOTE: When properly installed, DVD video cannot be displayed unless
the parking brake is applied. If you attempt to play a DVD while the
vehicle is moving, the screen displays the following warning.
13
MEDIA PLAYING—AUDIO/DISC FORM PLAYIN
Se
J1_MENUETTO
O scD-4278
£ ALMEDIO
1.Total time of the playing song.
2.1D3 information of the music playing such as singer's name, music
style, music name etc.
3.Present playing one/total music numbers.
4.Random play.
5.Loop playback. (ALL/SINGLE loop play).
6.PREV: Press to choose previous music.
7.PLAY/PAUSE: Touch to begin playing. And press the icon again to
pause playing.
8.NEXT ONE: Press to choose next music.
9.Press and you will see following keyboard to choose the music:
10.Click to see the music list menu. And user's can choose which
one to play here.
14
MUSIC PLAYING MENU
12:30 PM © ©
— ——==\\
Vu
— EE |
USIC || ME Music
dd 1 Alexandra Stan-Lemonade.mp3
dd 2 702-you' Il justnever know.mp3
a. There is one more function: scan the file in the SD and USB
b. Long press the song name to save the song to the playlist and you
can play anytime you want.
11.Press to going into EQ setting interface:
A Equalizer
MUSIC PLAYING MENU
Press MUSIC in the main menu, it refers to the music file from SD
and USB. USB/SD music menu is all same with the Disc music.
There is only one different: it will show the lyrics of the song if the
audio file have lyrics in it and name ended with LRC.
EQ ===
NITY_ZERO.MP3 — TO?
O scD-4278
£ ALMEDIO
Jd Other
11/25
00:00:04 (mt ) 00:01:00
15
BLUETOOTH OPERATION MENU
BLUETOOTH OPERATION MENU
Click BT icon and will enter into Bluetooth function interface:
LACT I cL (Nol
| Bluetooth oN @ |
Device Name Power Acoustik
Password 1234
Auto Answer
Auto Connect
Ext-Mic
1.Function area:
a.Click and see the dialing keyboard, users can dial no. and make
phone calls.
b.Click to see the Bluetooth phonebook.
c.Click to see the Bluetooth call history.
d.Bluetooth pairing interface as following:
Á Bluetooth 12:30 PM EO ===
Get the Paired list | BT List(Paired) 1/1 |
Guti Paired
Search Bluetooth
Devices Nearby
e.Default Bluetooth setting menu.
2.Bluetooth setting menu:
a) Bluetooth
Bluetooth ON ©
Device Name Phone Pairing
Password 1234
Auto Answer [ )oFF)
Auto Connect [ OFF)
Baie оч @
Note:
Device bluetooth name: Phone Pairing
Password: 1234
16
BLUETOOTH DIALING
a.ON/OFF: Turn on and turn off of Bluetooth when not using.
b.Auto Answer: Can turn on or turn off the function of listen to calls
automatically.
c.Auto Connect: Can connect the nearest searched devices
automatically which have already been connected before turn on.
d.Ext-Mic: Set ON to use external microphone, and set OFF to use
unit microphone.
BLUETOOTH DIALING
A Bluetooth 12:30 PM EQ ===
1
1.Shows the number you press in, and press MES to delete if it is
wrong.
2.Key area.
3.Touch to call out.
BLUETOOTH CALL
A Bluetooth
1008611
Active...
2 00:00:17 \ 4
1.Press to come out the number key.
2.Press to hang up phone calls.
3.Touch to talk through Bluetooth or smartphones.
4.Touch to mute the unit.
17
BLUETOOTH PHONE BOOK
BLUETOOTH PHONE BOOK
À Bluetooth 12:30 PM ==.
13800138001
13800138002
13800138003
13800138004 A
13800138005 A 1
1.Move up and down to search phone number.
2.Touch to enter name and search the wanted phone number.
MT te 12:30 PM )=5
í
13800138001
13800138002
SEE E EI 1. Touch to show the dialed phone
AIR
13800138001 so] number.
da 2.Touch to show the received phone
13800138003 `
13800138004 number.
13800138005 ; 3. Touch to show missed calls.
BLUETOOTH MUSIC
Press icon BT Music in main menu to enter into Bluetooth music and you can
see:
A BT Music 12:30 PM FO ==
6 Ji JJ Daniel Powter
“a Y / © Daniel Powter
=
wo £ Free Loop
I< > | | »1
18
PICTURE
3 4 5 6 7 8 9
1.Press to turn to the previous picture.
2.Press to turn to the next picture.
3.PLAY/PAUSE: touch to begin play. Press again the icon to pause.
During picture playing mode, one picture will be played for 5s
automatically and goes to the next if you do not press it.
4.Zoom out the present picture.
5.Zoom in the present picture.
6.Turn left 90 degrees.
7.Turn right 90 degrees.
8.Press to tailor the picture as you want. Touch and drag the corner
to decide the picture and
press you can set the picture as the background of the unit.
[5
And this background will remain the same till you reset it.
9.Press to see the picture list:
19
PICTURE
A 12:30 PM
3 ER 7 =
er Fr me a
Haz fm E
LA | i Na {|
on и
Ada) | > 7 с 2
y di A |. 3 | pacs
DA ur TE E
= - я
a. Touch to change between picture mode and picture list mode.
b.Scan the picture file of your SD or USB.
Input menu: shows the signal input to the unit, and if there is no
signal (AUXIN/AVIN), it will shows like:
20
TROUBLE SHOOTING
Table 1: Error message
Media displayed
Cause
Corrective Action
Loading
Disc is being read
No Disc/Bad Disc
Disc is dirty
Clean the disc
Disc is upside down
Insert Disc in right way
Unknown Disc
Unsupported Disc type
Check the disc and
change one
Error
lllegal mechanism
operation
Press EJECT for 5s to
reset loading mechanism
Table 2:General problems
Problem Cause Corrective Action
Unit will not | Radio fuse blown Install new fuse with right
power on
rating
Car battery fuse blown
Install new fuse with right
rating
lllegal operation
Press the RESET button
Screen touch
Place of touch screen
Go to setup menu and set
is insensitive| is offset the calibration
No audio output | Improper audio output connection | Check wiring and correct
VOLUME O Turn up the volume
Improper MUTE Check wiring and TEL
connection MUTE connection
Speaker damaged Change speakers
Low audio output| Volume set too low Increase the volume
Heavily biased volume
balance
Check and adjust the channel
balance to the center position
21
TROUBLE SHOOTING
Poor sound quality
Speaker power rating
Connect proper speakers
changed to GPS system
or distortion | not compatible with unit
Speaker is shorted Check speaker contrast
No GPS image | Image has not been
Change to GPS system
Table 3: TFT monitors
Problem
Cause
Corrective Action
No image
Incorrect connection
to parking wire
Check wiring and
correct
Parking brake is not
engaged
Stop vehicle in safe place
and set parking brake ON
or interference
appears on screen
Flashing image | DVD is not compatible with
current TV system settings
Change setup to
accommodate Disc
Improper video signal connections
Check wiring and correct
ratio display
Improper image, Improper aspect ratio setup
improper height/width
Use correct aspect
ratio setting
Table 4: Tuner
Problem Cause Corrective Action
Weak station | Auto antenna is not fully Connect the auto
searching extended antenna properly
LOCAL function is activated | Turn LOCAL function OFF
22
TROUBLE SHOOTING
Table 5: Disc
Problem
Cause
Corrective Action
Cannot insert Disc
Disc already inside unit
Eject the current Disc and
insert the new one
Lots of noise during
play, and stop then
Disc is scratched or
warped
Use a new one in good
condition
Disc is dirty or wet
Clean the Disc
No repeat or
searching while
playing VCD
PBC is ON
Turn PBC OFF
23
Map User Instruction
Thank you for choosing map as your navigator. Start using map
right away. This document is the detailed description of the
navigation software. You can easily discover map while you are
using it; however, we still recommend that you read this manual
to fully understand the screens and features.
CONTENTS
CC nan cn ec cnenen ee 25
Navigation MeENnU.…..…...............…......cseccsrcreccnecnece nec cere see nee 27
Map SCreen.….…..…..…...….........cercrrcnreneenee rare nan ar enr e race n anne nes 28
Entering an address or a part of the address 31
Entering an address (United States) ........................... 31
Searching for a Place of Interest using
preset categories ....................e.r.eserisiierieerrarer aerea 33
Saving a location as a Favorite destination .................. 35
Building a route from the list of destinations
(Create Route).......................e.ereeeiererererererenenenereee mee. 36
Viewing the entire route on the map 37
"More" menu ….….…..…..............usceersca cena cn ae n nana ae nana nana annee 38
Getting started
Map is optimized for in-car use. You can use it easily by tapping the
screen buttons and the map with your fingertips.
When using the navigation software for the first time, an initial setup
process starts automatically. Do as follows:
1. Select the written language of the application interface. Later you
can change it in Regional settings
Español
2. Read the End Time Zone. Tap RAEE to continue.
Your navigation application can collect GPS logs and can gather
information on how the application is used. This information can help us
improve the application as well as the quality and coverage of maps.
These logs are processed anonymously, and no one will be able to track
any personal information.
Do you allow the collection of such information?
Getting started
3. The Configuration wizard starts. Tap to continue.
4. Select the language and speaker used for voice guidance
messages. Later you can change it in Sound and Warnings settings
female Kate v229228 Street names not announced
English (UK) Natural Voice
male James v229228 Street names not announced
== English (US) Natural Voice
male Dave v229228 Street names not announced
English (US) Natural Voice
female Amy v229228 Street names not announced
English (US) TTS Voice
5. If needed, modify the time format and unit settings. Later you can
change them in Regional settings
Distance Miles/ feet
Fuel Economy MPG(US)
Weight Metric Ton
Currency
6. If needed, modify the default route planning options. Later you can
change them in Route settings
Vehicle
Navigation Mode
Route Planning
Method
IT
MH Highways
Navigation menu
7. The initial setup is now complete. The Configuration wizard can be
restarted later from the Settings menu
After the initial setup, the Navigation menu appears and you can start
using map.
Navigation menu
You can reach all parts of map from the Navigation menu.
uw
i O Destination
— A
» Ds Route Options
Show Map & More...
You have the following options:
Tap a rueorios to select your destination by entering an address or
selecting a place of interest, a location on the map or one of your
Favorite destinations. You can also look up your recent destinations
from the Smart History or enter a coordinate.
Tap v= to display the route parameters and the route in its full
length on the map. You can also perform route-related actions such
as editing or canceling your route, setting a start point for the route,
picking route alternatives, avoiding parts of the route, simulating
navigation or adding the destination to your Favorites.
Tap we to simulate demo routes or to run some additional
applications.
Tap to start navigating on the map. The button itself is a
miniature live map that shows your current position, the
recommended route and the surrounding map area. Tap the button to
enlarge the map to the full screen.
Tap £ osinin — to stop navigation and exit the software.
27
Map screen
1. Navigating on the map | ==
The Map screen is the most frequently used screen of map.
A small live map is displayed on the Navigation menu, as a part of the
button.
v
à O Destination
—d]o
Е
» 23 Route Options
Show Map & More...
To enlarge this small map and open the Map screen, tap Show Map
This map shows the current position (the Vehimarker, a blue arrow by
default), the recommended route (an orange line), and the
surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It
shows your last known position.
You see colored dots circling around a satellite symbol in the top left
corner. The more green dots you see, the closer you are to get the
valid GPS position.
y Looking for GPS signal...
Menu | Demo
28
Map screen
When GPS position is available, the Vehimarker is displayed in full
color, now showing your current position.
E Harmon Ave
E Harmon /
Distance
0.6 mi :
The button gives quick access to frequently used functions. You
can change the available functions in Settings
O
N
Quick Place Create
Search Route
>
Map
Settings Settings
By default, only one data field is displayed in the bottom right corner.
Tap this field to see all route data fields. Tap any of the data fields to
suppress others and display only the selected one.
E Harmon Ave
E Harmon /
Distance
0.6 mi :
Map screen
The data fields are different when you are navigating an active route
and when you have no specified destination (the orange line is not
displayed).
Default data fields when navigating a route (tap and hold any of the
fields to change its value):
Field Description
BENE y Shows the distance you need to travel on the
0.6 mi route before reaching your final destination
Shows the time needed to reach the final
destination of the route based on information
available for the remaining segments of the
route.
Time Left If Unavi X5 is capable of receiving live traffic
0:16 information, the calculation takes into account
traffic delays affecting your route if they are
received. However, this calculation is rarely
accurate.
Historical traffic data can also be taken into
account if data is available.
Shows the estimated arrival time at the final
destination of the route based on information
available for the remaining segments of the
Arrival TIME route.
17:22 If Unavi X5 is capable of receiving live traffic
- information, the calculation takes into account
traffic delays affecting your route if they are
received. However, this calculation is rarely
accurate.
Historical traffic data can also be taken into
account if data is available
30
Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to
select the destination of the route.
Using the same screen, you can find an address by entering:
* The exact address, including house number
* The center of a city/town
* An intersection
* The midpoint of a street
* Any of the above, starting the search with the ZIP code
Entering an address (United States)
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap Menu ‘ to return to the
Navigation menu.
2. In the Navigation menu, tap the following buttons: © oestnstir
3. By default, map proposes the country and state where you are. If
needed, tap Country the first few letters of the destination
country or state on the keyboard, and select one from the list. If you
select a country without a state, you can search for a city/town in all
its states.
| Country United States, Alabama
City <City or ZIP Code>
Street <Street Name>
4. Select a new city/town:
a. Tap City . The city/town of your current location is offered by
default. For a local search, tap Ра to accept it, otherwise continue
with entering the destination city/town name.
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
* The most likely city/town name is always shown in the input field. To
accept it, tap 7 .
31
Entering an address or a part of the address
* If the desired name does not show up, the names that match the
string appear in a list after entering a couple of characters (to open
the list of results before it appears automatically, tap i= Results (47) |
Select the city/town from the list.
5. Enter the street name:
a. Tap Street .
b. Start entering the street name on the keyboard.
c. Find the street you need:
* The most likely street name is always shown in the input field. To
acceptit, tap |7 If the desired name does not show up, the names
that match the string appear in a list after entering a couple of
characters (to open the list of results before it appears automatically,
tap ). Select the street from the list.
6. Enter the house number:
a. Tap < House Number>
b. Enter the house number on the keyboard.
(To enter letters, tap ada ).
c. Tap to finish entering the address. (If the entered house
number cannot be found, the midpoint of the street is selected as the
destination.)
<Enter House Number (68100-7049¢
Od Ob
т |
Entering an address or a part of the address
7. A full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination.
The Cursor appears at the new location. Tap 7 to confirm the
destination, or tap to select a different destination.
8. After a short summary of the route parameters, the map appears
showing the entire route. The route is automatically calculated.
Tap to modify route parameters, or tap PA and start
your journey.
“ay Route Planning Method
Road Types Used
+ Highways + Ferries
+ Period Charge Unpaved Roads
v Per-use Toll Carpool/HOV
Searching for a Place of Interest using preset categories
The Preset search feature lets you quickly find the most frequently
selected types of Places.
1. If you are on the Map screen, tap Menu to return to the
Navigation menu
2. In the Navigation menu, tap the following buttons:
Gas Station
Along Route
\
- м
Quick Search Parking
Along Route At My Destination
Restaurant
a Along Route
Accommodation
At My Destination
Custom Search
33
Entering an address or a part of the address
3. The preset search categories appear:
wwe If an active route exists, gas stations are searched along
the route.
* |f there is no active route (destination is not selected), they are
searched around the current position.
* |f the current position is not available either (no GPS signal), they
are searched around the last known position.
wc» |f an active route exists, parking lots are searched around
the destination of the route.
* |f there is no active route (destination is not selected), they are
searched around the current position.
* |f the current position is not available either (no GPS signal), they
are searched around the last known position.
Restaurant If an active route exists, restaurants are searched along
the route.
* |f there is no active route (destination is not selected), they are
searched around the current position.
* If the current position is not available either (no GPS signal), they
are searched around the last known position.
Amber If an active route exists, accommodation is searched
around the destination of the route.
* |f there is no active route (destination is not selected), they are
searched around the current position.
* |f the current position is not available either (no GPS signal), they
are searched around the last known position.
4. Tap any of the quick search buttons to get an instant list of Places.
Search in progress...
FF FEFTFTFETTTFTTTT TTT ДР ОГО ОЙРО ДР ДР ДР ОШ ДР ДР О Я ож ож ож о
Еххоп Fa
302 Cox Creek Pkwy, Florence, AL, 35630 0.3 mi
CM Shell (|
358 Cox Creek Pkwy, Florence, AL, 35630 0.4 mi
vw
Mapco +
2291 Florence Blvd, Florence, AL, 35630 0.6 mi
34
Entering an address or a part of the address
Saving a location as a Favorite destination
You can add any location to Favorites, the list of frequently used
destinations. Planning a route to one of the Favorite destinations is
described on page 65.
1. Select a destination as described before. It can be an address, a
Place, any location on the map, a previously used destination from
History, etc.
2. When the full screen map appears with the selected location in the
middle, tap
Route Alternatives
Da
/ 7 | Itinerary
BSE Route Settings
W Close
3. Tap JA Add to Favorites
4. (Optional) Using the keyboard, you can change the name offered for
the Favorite. Tap to enter numbers or symbols.
= Enter a Name for the Favorite >
EEE
д | = | о | г | < | н | з | к |
с v B |
5. Tap EYAbisi-M to save the location as a new Favorite destination
35
Entering an address or a part of the address
Building a route from the list of destinations (Create Route)
You can also build your route destination by destination from the My
Route menu.
1. If you are on the Map screen, tap Meny to return to the Navigation
menu.
2. In the Navigation menu, tap Hy soos
3. Tap PA Edit Route
Ta 189 Ana Dr >
) Florence
| же | Io
4. There is only one line in the list of route points, the start point of the
route, normally the current GPS position.
5. Тар =Ё to select the destination.
6. The Destination menu appears and you can select the destination
of the route the same way as described in the previous sections
ill Search in all...
<P Google
Find Address Find Places Local Search
71748 Thomas Ln
:
d Little River (Baldwin)
7. 19711 Young St
2 Fairhope
7. When the new destination is selected, the list returns.
36
Viewing the entire route on the map
Ww 189 Ana Dr >
Florence
vu 71748 Thomas Ln G
Little River (Baldwin)
| же | окос —
8. To add more destinations, tap = where you want to insert the
new route point in the list, and repeat the above procedure.
Viewing the entire route on the map
It is easy to get a map overview of the active route. Do as follows:
1. If you are on the Map screen, tap Menu to return to the
Navigation menu.
2. In the Navigation menu, tap J route options
3. Tap $ oevie . The active route is displayed in its full length on the
map together with additional information and controls
19711 Young St
lues
ГО
|||
va
37
'More' menu
The 'More' menu provides you with various options and additional
applications. Tap the following buttons: Menu $ "or.
0 e @ | A
Updates and i Picture | Unit
Extras Music Player Viewer || Converter
Fuel Sunrise &
Calculator § Consumption Sunset Trip Monitor ÿ In
1. Settings menu
You can configure the program settings, and modify the behavior of map
The Settings menu has several options, Tap | «+ | or scroll with your
finger to see the full list. a
S) Sound and Warnings
Customize Quick Menu
& Driving Time Management
el Traffic
v
38
'More' menu
Field Description
Adjust the sound volume, mute your device or
change the voice guidance language. In addition,
you can enable and set up different warnings and
alerts.
SD Sound and Warnings
The content of the Quick menu (page 22) is fully
(7) Customise Quick Menu || customizable. Tap the button you want to change,
and select its new function from the list.
The recommended route is not always the same
between two points. Whenever suitable data
exists, traffic information can be taken into
account in the route calculation.
|g] Traffic
These settings determine how routes will be
995 route Settings calculated. Select the type of vehicle you are
driving, the road types used in route planning, and
the route planning method.
You can fine-tune the appearance of the Map
screen. Adjust the map view to your needs,
choose suitable color themes from the list for both
© Map settings daytime and night use, change the blue arrow to a
3D car model, show or suppress 3D buildings,
turn track logging on or off, and manage you
Place visibility sets (which Places to show on the
map).
Adjust how the software helps you navigate with
< visual Guidance || different kinds of route related information on the
Map screen.
A Dis Display related settings include menu animations
isplay . . .
and separate skins for daytime and night use.
These settings allow you to customize the
mer Regional application for your local language, measurement
units, time and date settings and formats, as well
as to choose the time zone.
39
'More' menu
Field
Description
wl Trip Monitor
Trip logs and track logs contain useful information
about your trips. Trip logs can be saved manually
when you reach your destination or you can turn
on the automatic saving here.
$ Log Collection
The application collects usage information and
GPS logs that may be used for improving the
application and the quality and coverage of maps.
Here you can enable or disable collecting these
logs.
Cu
À sean Configuration Wizard
Modify the basic software parameters set during
the initial setup process. For details, see page 7.
L Reset to Defaults
Delete all saved data and reset all settings to their
factory defaults.
Updates and
Extras
Visit www.naviextras.com to get additional
content, such as new maps or 3D landmarks and
useful applications.
Unit Converter
Access travel applications: the unit converter
helps you convert between various different
international units for temperature, speed, area or
pressure, etc.
Clothing
Access travel applications: the clothing size
converter helps you convert between various
different international size units for men's or
women's cloth types and shoes
2
The scientific calculator helps you in all your
calculation needs. Tap the Mode button for
additional functions and use the memory to save
your results.
40
'More' menu
Field Description
The Fuel consumption monitor helps you keep
track of the consumption of your car even if you
do not use navigation for all your journeys. Set
the initial odometer value and then record the
Consumption distance taken and fuel filled in whenever you fill
your car. You can also set reminders for regular
car maintenance.
:D
Tap this button to see the sunlit and dark areas of
the world. Your current location and route points
Co are marked on the map. Tap the Details button to
ES see the exact sunrise and sunset times for all
your route points (your current location, all
waypoints and the final destination).
If you save your trip logs when you arrive at some
of your destinations or let the application
automatically save the trip logs for you, those logs
are all listed here. Tap one of the trips to see the
trip statistics, speed and altitude profile. If track
log has also been saved, you can display it on the
map with the selected color. Track logs can be
exported to GPX files for later use.
Trip Monitor
TY
Select a country from the list and see useful
driving information about the selected country.
К Information may include speed limits on different
ron road types, the maximum blood alcohol level and
any compulsory equipment you need to show
when stopped by the police.
Run the Demo and watch sample route
simulations to see how navigation works.
The About section provides you with product
information. Read the Software and Database
Her End User License Agreement, or check the map
and other contents of the application. You can
also access program usage statistics.
a
41
EPSILON ELECTRONICS. INC.
1550 S.Maple Ave.Montebello CA 90640 USA
Tel: 323 722 3333
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising