Owner`s Manual
Connections
Playback
Settings
Tips
.
Contents
AVR-S530BT
AV SURROUND RECEIVER
Owner’s Manual
Front panel
Display
Rear panel
1
Remote
Index
Appendix
Contents
Connections
Playback
Settings
5
6
6
7
7
7
9
10
10
13
14
16
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
High quality sound
High performance
Easy operation
Part names and functions
Front panel
Display
Rear panel
Remote control unit
Front panel
Display
Rear panel
Appendix
Connecting a playback device
Connecting a set-top box (Satellite tuner/cable TV)
Connecting a DVD player or Blu-ray Disc player
Connecting a video camcorder or game console
Connecting a USB memory device to the USB port
Connecting an FM/AM antenna
Connecting the power cord
29
30
31
32
33
34
36
Playback
Basic operation
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Playback a DVD player/Blu-ray Disc player
Playing a USB memory device
Playing files stored on USB memory devices
Listening to music on a Bluetooth device
Playing music from Bluetooth device
Pairing with other Bluetooth devices
Reconnecting to this unit from a Bluetooth device
Connections
Connecting speakers
Speaker installation
Speaker connection
Standard speaker configuration and connection
Connecting a TV
Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)
Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)
Connection 3 : TV equipped without an HDMI connector
Tips
20
20
22
24
25
26
27
28
2
Remote
Index
38
38
38
39
39
39
40
41
42
43
45
46
Contents
Connections
Playback
Listening to FM/AM broadcasts
Listening to FM/AM broadcasts
Tuning in to stations and presetting them automatically (Auto
Preset)
Presetting the current broadcast station (Preset Memory)
Listening to preset stations
Skipping preset broadcast stations (Preset Skip)
Cancelling Preset Skip
Convenience functions
Performing repeat playback (Repeat)
Performing random playback (Random)
Adjusting the tone (Tone)
Optimizing the night time listening volume (Night Mode)
Displaying your desired video during audio playback (Video
Select)
Selecting a sound mode
Selecting a sound mode
HDMI control function
Setting procedure
Adjusting the volume of each channel to match the input
source (Ch Level Adjust)
Front panel
Display
Rear panel
Settings
47
48
Tips
63
64
65
66
66
Sleep timer function
Using the sleep timer
Quick select plus function
Calling up the settings
Changing the settings
49
50
50
51
51
52
53
53
54
55
Appendix
Settings
67
70
71
71
74
75
75
76
77
77
77
78
78
79
79
80
Menu map
Menu operations
Audio
Surr.Parameter
Restorer
Audio Delay
Volume
Room EQ
Video
HDMI Audio Out
HDMI PassThrough
Pass Source
HDMI Control
ARC
TV Audio Switching
Pow.Off Control
56
57
57
61
61
62
3
Remote
Index
Contents
Connections
Playback
Display
Rear panel
Tips
Appendix
Tips
81
81
81
82
83
83
85
87
88
88
89
90
90
91
92
92
92
94
95
95
96
97
Inputs
Input Assign
Source Level
Input Select
Speakers
Auto Setup
Procedure for speaker settings (Auto Setup)
Error messages
Manual Setup
Speaker Config.
Distances
Levels
Crossovers
Bass
General
Language
ECO
Bluetooth
Front Display
Firmware
Setup Lock
Checking the information
Front panel
Settings
99
100
112
Tips
Troubleshooting
Resetting factory settings
Appendix
About HDMI
Playing back a USB memory devices
Playing back a Bluetooth device
Personal memory plus function
Last function memory
Sound modes and channel output
Sound modes and surround parameters
Types of input signals, and corresponding sound modes
Explanation of terms
Trademark information
Specifications
Index
4
Remote
Index
113
116
117
118
118
119
120
121
122
127
129
133
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Denon product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
.
Check that the following parts are supplied with the product.
Quick Start Guide
Safety Instructions
Notes on radio
Warranty
(for North America
model only)
AM loop antenna
Sound calibration
microphone
Remote control unit
(RC-1216)
R03/AAA batteries
Front panel
Display
Rear panel
5
Remote
Index
FM indoor antenna
Connections
Contents
Playback
Settings
Inserting the batteries
1
Tips
Appendix
NOTE
0 To prevent damage or leakage of battery fluid:
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Remove the rear lid in the direction of the arrow and
remove it.
Operating range of the remote control
unit
.
Point the remote control unit at the remote sensor when operating it.
2
Insert two batteries correctly into the battery
compartment as indicated.
Batteries
Approx. 23 ft/7 m
30°
.
30°
Put the rear cover back on.
Front panel
Display
.
3
Rear panel
6
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Features
High quality sound
High performance
0 With discrete circuit technology, the power amplifier provides
0 4K 60Hz input/output supported
.
identical quality for all 5-channels (90 Watts x 5-channels)
For optimum realism and stunning dynamic range, the power amplifier
section features discrete power devices (not integrated circuitry).
By using high current, high power discrete power devices, the amplifier
is able to easily drive high quality speakers.
When 4K Ultra HD (High Definition) is used, an input/output speed of 60
frames per second (60p) is achieved for video signals. When connected
to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy
the sense of realism only available from high-definition images, even
when viewing fast-moving video.
This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit
videos. By processing the video at the original resolution, this unit lets
you enjoy flawless, high-definition picture quality.
This unit also supports HDR (High Dynamic Range) and BT.2020 wide
color gamut.
0 HDCP 2.2
This unit is compatible with HDCP 2.2 copyright protection standard.
Front panel
Display
Rear panel
7
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
0 Wireless connection with Bluetooth devices can be carried out
0 HDMI connections enable connection to various digital AV
devices (5 inputs, 1 output)
easily (v p. 42)
5 1
Out
.
In
.
This unit is equipped with 5 HDMI inputs and 1 HDMI output enabling
connection to various HDMI compatible devices such as Blu-ray Disc
players, game consoles and HD video camcorders.
You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.
0 Energy-saving design
This unit is equipped with an ECO Mode function that allows you to
enjoy music and movies while reducing the power consumption during
use, and also an auto-standby function that automatically turns off the
power supply when the unit is not in use. This helps reduce
unnecessary power use.
Front panel
Display
Rear panel
8
Remote
Index
Contents
Connections
Playback
Settings
Tips
Easy operation
0 “Setup Assistant” provides easy-to-follow setup instructions
First select the language when prompted. Then simply follow the
instructions displayed on the TV screen to set up the speakers etc.
0 Easy to use Graphical User Interface
This unit is equipped with a Graphical User Interface for improved
operability.
0 Compatible with the “Denon 500 Series Remote” app performing
basic operations of the unit with an iPad, iPhone or Android™
devices (Google, Amazon Kindle Fire)
The “Denon 500 Series Remote”z application allows you to wireless
control this unit from an iPhone, iPad, Android smartphone or tablet
when paired and connected via Bluetooth. Basic functions include:
Power ON/OFF, volume, mute, and source selection.
z Download the appropriate “Denon 500 Series Remote” for your iOS or Android
devices. In order to use “Denon 500 Series Remote”, your iOS or Android device
needs to be paired with this unit in advance.
Front panel
Display
Rear panel
9
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Part names and functions
Front panel
q w
e
r
t
y
u
i
o
SOUND MODE
TUNER
PRESET CH
TUNE
1 CBL/SAT
2 DVD/Blu-ray
3
GAME
Q0 Q1
MODE
SLEEP
Q2 Q3
DIMMER
STATUS
4 Bluetooth
SOURCE SELECT
MASTER VOLUME
QUICK SELECT
PHONES
ON / OFF
BASS /
TREBLE
SETUP MIC
ADJUST
5V/1A
TONE CONTROL
AV SURROUND RECEIVER
.
Q4
For details, see the next page.
Front panel
Display
Q5 Q6
Rear panel
Q7
10
Q8
Q9
Remote
W0
Index
Contents
qw
Connections
er
Playback
t
u
i
SOUND MODE
TUNER
PRESET CH
1 CBL/SAT
TUNE
3
GAME
SLEEP
DIMMER
F MASTER VOLUME knob
This adjusts the volume level. (v p. 39)
STATUS
4 Bluetooth
SOURCE SELECT
G SOUND MODE buttons (0 1)
These select the sound mode. (v p. 57)
MASTER VOLUME
QUICK SELECT
PHONES
ON / OFF
BASS /
TREBLE
SETUP MIC
ADJUST
TONE CONTROL
5V/ 1A
H Tuner preset channel buttons
(TUNER PRESET CH +, –)
These select preset broadcast stations. (v p. 50)
.
AV SURROUND RECEIVER
A Power operation button (X)
Used to turn the power on/off (standby). (v p. 38)
I Tuning buttons (TUNE +, –)
Select either FM broadcast or AM broadcast. (v p. 48)
B Power indicator
This is lit as follows according to the power status:
0 Green: Power on
0 Off: Normal standby
0 Red:
0 When “HDMI PassThrough” is set to “On” (v p. 77)
0 When “HDMI Control” is set to “On” (v p. 78)
0 When “BluetoothStandby” is set to “On” (v p. 94)
J Tuning mode select button (MODE)
This switches the tuning mode. (v p. 48)
K SLEEP button
This sets the sleep timer. (v p. 63)
L DIMMER button
Each press of this switches the brightness of the display. (v p. 95)
M STATUS button
Each press of this switches the status information that is shown on the
display.
C SOURCE SELECT knob
This selects the input source. (v p. 38)
Front panel
Display
Appendix
E Display
This displays various pieces of information. (v p. 13)
Q0 Q1 Q2Q3
MODE
Tips
D Remote control sensor
This receives signals from the remote control unit. (v p. 6)
y
o
2 DVD/Blu-ray
Settings
Rear panel
11
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
P BASS/TREBLE button
Selects the range for which to adjust the tone. (v p. 54)
TUNER
PRESET CH
SOUND MODE
1 CBL/SAT
TUNE
2 DVD/Blu-ray
3
GAME
MODE
SLEEP
DIMMER
Q Tone adjustment buttons (ADJUST 0 1)
Adjusts the tonal quality of the sound. (v p. 54)
STATUS
R QUICK SELECT buttons
With a single press of any of these buttons, you can call up various
settings you’ve registered to each button such as the input source,
volume level and sound mode settings. (v p. 65)
4 Bluetooth
SOURCE SELECT
MASTER VOLUME
QUICK SELECT
PHONES
ON / OFF
BASS /
TREBLE
SETUP MIC
ADJUST
TONE CONTROL
5V/1A
AV SURROUND RECEIVER
.
Q4 Q5 Q6 Q7 Q8 Q9
S USB port (T)
This is used to connect USB storages (such as USB memory devices)
and the USB cable supplied. (v p. 33)
W0
N Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the SUBWOOFER
connectors.
T SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.
(v p. 86)
NOTE
0 BASS/TREBLE button and ADJUST 0 1 buttons can be operated when the
“Tone” setting is “On”. (v p. 54)
0 To prevent hearing loss, do not raise the volume level excessively when using
headphones.
O TONE CONTROL ON/OFF button
Set the tone control function to on/off. (v p. 54)
Front panel
Display
Rear panel
12
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Display
w
e
r
i
.
q
A Input mode indicators
These light according to the audio input mode settings of each input
source. (v p. 82)
t
y u
o
D Sleep timer indicator
This lights when the sleep mode is selected. (v p. 63)
E Circle indicator
This is displayed when the input source is “USB” when you are playing
back music.
B Decoder indicators
These light when Dolby or DTS signals are input or when the Dolby or
DTS decoder is running.
F Volume indicator
G MUTE indicator
This blinks while the sound is muted. (v p. 39)
C Tuner reception mode indicators
These light up according to the reception conditions when the input
source is set to “Tuner”.
TUNED: Lights up when the broadcast is properly tuned in.
STEREO: Lights up when receiving FM stereo broadcasts.
H Information display
The input source name, sound mode, setting values and other
information are displayed here.
I Input signal indicators
The respective indicator will light corresponding to the input signal.
(v p. 82)
Front panel
Display
Rear panel
13
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Rear panel
.
q
t
y
w
u
r
e
i
For details, see the next page.
Front panel
Display
Rear panel
14
Remote
Index
Contents
q
w
Connections
Playback
e
r
Settings
Tips
Appendix
C HDMI connectors
Used to connect devices equipped with HDMI connectors.
0 “Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)” (v p. 26)
0 “Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 27)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 31)
0 “Connecting a video camcorder or game console” (v p. 32)
D Power cord (v p. 36)
.
t y u
E Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
(v p. 30)
i
A Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
0 “Connection 3 : TV equipped without an HDMI
connector” (v p. 28)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30)
F FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas. (v p. 34)
G PRE OUT connectors
Used to connect a subwoofer with a built-in amplifier. (v p. 23)
H Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 22)
B Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
0 “Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 27)
0 “Connection 3 : TV equipped without an HDMI
connector” (v p. 28)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30)
Front panel
Display
Rear panel
15
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
A Input source select buttons
These select the input source. (v p. 38)
B Channel/page search buttons (CH/PAGE df)
These select radio stations registered to presets or switch pages.
(v p. 50)
C MUTE button (:)
This mutes the output audio. (v p. 39)
q
D Information button (INFO)
This displays the status information on the TV screen. (v p. 97)
E Cursor buttons (uio p)
These select items.
w
e
r
t
Front panel
Display
Rear panel
16
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
F BACK button
This returns to the previous screen.
Q1
Q2
G Channel level button (CH LEVEL)
Adjusting the volume of the speakers. (v p. 62)
H System buttons
These perform playback related operations.
Tuning up / Tuning down buttons (TUNE +, –)
These select either FM broadcast or AM broadcast. (v p. 48)
I QUICK SELECT buttons (1 – 4)
These call up settings registered to each button, such as input source,
volume level and sound mode settings. (v p. 65)
J SOUND MODE buttons (0 1)
These select the sound mode. (v p. 57)
K Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 6)
L SLEEP button
This sets the sleep timer. (v p. 63)
y
u
i
o
Q0
Front panel
Display
Rear panel
17
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M POWER button (X)
This turns the power on/off. (v p. 38)
N ECO Mode button (G)
This switches to ECO Mode. (v p. 92)
O VOLUME buttons (df)
These adjust the volume level. (v p. 39)
Q3
P OPTION button
This displays the option menu on the TV screen.
Q ENTER button
This determines the selection.
R SETUP button
This displays the menu on the TV screen. (v p. 70)
Q4
Q5
S Preset memory button (MEMORY)
The current broadcast station that is preset. (v p. 50)
Q6
Q7
T Tuning mode select button (MODE)
This switches the tune mode. (v p. 48)
U AUDIO DELAY buttons (+, –)
Compensates for incorrect timing between video and audio.
(v p. 75)
Q8
Q9
W0
W1
Front panel
Display
Rear panel
18
Remote
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
o Cables used for connections
20
Connecting a TV
25
Connecting a playback device
29
Connecting a USB memory device to the USB port
33
Connecting an FM/AM antenna
34
Connecting the power cord
36
Provide necessary cables according to the devices you want to
connect.
Speaker cable
.
Connecting speakers
Subwoofer cable
.
NOTE
HDMI cable
.
0 Do not plug in the power cord until all connections have been completed.
However, when the “Setup Assistant”is running, follow the instructions in the
“Setup Assistant” (page 7 in the separate “Quick Start Guide”) screen for making
connections. (During “Setup Assistant” operation, the input/output connectors do
not conduct current.)
0 Do not bundle power cords together with connection cables. Doing so can result in
noise.
.
Video cable
.
Coaxial digital cable
.
Optical cable
L
L
R
R
.
Audio cable
Front panel
Display
Rear panel
19
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting speakers
Install speakers and connect them to this unit. (“Speaker installation” (v p. 20), “Speaker connection” (v p. 22))
Speaker installation
.
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
FL
FL/FR
(Front speaker left/
right):
Place the FRONT left and right speakers an
equal distance from the main listening position.
The distance between each speaker and your TV
should also be the same.
C
(Center speaker):
Place the CENTER speaker in between the front
speakers and above or below your TV.
SL/SR
Place the SURROUND left and right speakers an
(Surround speaker left/ equal distance to the left and right sides of the
right):
main listening position.
FR
SW 1/2
(Subwoofer) :
SW1
C
SL
Front panel
SW2
Place the SUBWOOFER at a convenient location
near the front speakers. If you have two
subwoofers, place them asymmetrically across
the front of your room.
SR
Display
Rear panel
20
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o When 5.1-channel speakers are installed
0 Use the illustration below as a guide for how high each speaker should be
installed. The height does not need to be exactly the same.
FL
FR
Surround
speaker
SW
C
z1
z2
Front speaker
SL
SR
.
.
GViewed from the sideH
z1
Front panel
Display
Rear panel
21
Remote
22° - 30°
z2
Index
120°
Contents
Connections
Playback
Settings
Tips
Appendix
o Connecting the speaker cables
Speaker connection
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
1
NOTE
.
0 Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. (“Protection circuit” (v p. 126))
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” (page 7 in the separate
“Quick Start Guide”) is running, follow the instructions in the “Setup Assistant”
screen for making connections. (Power is not supplied to the speaker terminals
while the “Setup Assistant” is running.)
0 Use speakers with an impedance of 6 – 16 Ω/ohms.
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
Press the lever on the speaker terminal.
.
2
Holding the lever on the speaker terminal, insert the
core wire of the speaker cable all the way into the
speaker terminal.
.
3
Release your finger from the lever on the speaker
terminal.
.
4
Front panel
Display
Rear panel
22
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Connecting the subwoofer
.
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
The same signal is output from the respective subwoofer terminals.
SW1
Front panel
SW2
Display
Rear panel
23
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Standard speaker configuration and connection
This serves as a basic 5.1-channel surround system.
Sound modes such as Dolby Pro Logic g are supported.
FL
FR
SW
C
SL
.
.
SR
Front panel
Display
Rear panel
24
SW
Remote
FR
FL
Index
C
SR
SL
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a TV
Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit.
How to connect a TV depends on the connectors and functions equipped on the TV.
ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Is the TV equipped with an HDMI connector?
Yes
Is the TV compatible with the ARC (Audio Return Channel) ?
No
No
.
Yes
“Connection 1 : TV equipped with an HDMI
connector and compatible with the ARC (Audio
Return Channel)” (v p. 26)
Front panel
Display
“Connection 2 : TV equipped with an HDMI
connector and incompatible with the ARC (Audio
Return Channel)” (v p. 27)
Rear panel
25
Remote
“Connection 3 : TV equipped without
an HDMI connector” (v p. 28)
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 1 : TV equipped with an HDMI connector and compatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit.
Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 78)
TV
.
HDMI
IN
(ARC)
Front panel
Display
Rear panel
26
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
IN
OPTICAL
OUT
HDMI
IN
.
OUT
Front panel
Display
Rear panel
27
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connection 3 : TV equipped without an HDMI connector
Use a video cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
OUT
VIDEO
IN
OPTICAL
OUT
.
IN
Front panel
Display
Rear panel
28
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a playback device
This unit is equipped with two types of video input connectors (HDMI and composite video) and three types of audio input connectors (HDMI, digital audio
and audio).
Select input connectors on this unit according to the connectors equipped on the device you want to connect.
If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 31)
0 “Connecting a video camcorder or game console” (v p. 32)
0 Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.
0 The source that is assigned to the OPTICAL 1, OPTICAL 2 and COAXIAL connectors can be changed. See “Input Assign” on how to change the input source assigned to the
input connectors. (v p. 81)
0 To play back audio signals that are input to this unit on a TV connected via HDMI, set “HDMI Audio Out” to “TV”. (v p. 77)
0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with HDCP 2.2 only.
0 To enjoy 4K content or content that is copyright protected by HDCP 2.2, connect the device to the HDMI 3, HDMI 4 or HDMI 5 input connector.
Front panel
Display
Rear panel
29
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connecting a set-top box (Satellite tuner/cable TV)
This explanation uses the connection with a satellite tuner/cable TV STB as an example.
Select the input connectors on this unit to match the connectors on the device that you want to connect to.
(HDMI incompatible device)
Satellite tuner/
Cable TV
AUDIO
R
VIDEO
COAXIAL
OUT
AUDIO
OUT
R
L
Satellite tuner/
Cable TV
VIDEO
OUT
HDMI
OUT
L
or
L
.
R
Front panel
Display
Rear panel
30
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a DVD player or Blu-ray Disc player
This explanation uses the connection with a DVD player or Blu-ray Disc player as an example.
When connecting a 4K / HDCP 2.2 compatible player, connect to either the HDMI 3, HDMI 4 or HDMI 5 input connector.
DVD player/
Blu-ray Disc
player
.
HDMI
OUT
Front panel
Display
Rear panel
31
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a video camcorder or game console
This explanation uses the connection with a video camcorders as an example.
Connect a playback device to this unit, such as a video camcorder or game console.
Video camcorder
.
HDMI
OUT
Front panel
Display
Rear panel
32
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a USB memory device to the USB port
For operating instructions see “Playing a USB memory device” (v p. 40).
USB memory
device
TUNER
PRESET CH
SOUND MODE
1 CBL/SAT
TUNE
2 DVD/Blu-ray
3
GAME
MODE
SLEEP
DIMMER
STATUS
4 Bluetooth
MASTER VOLUME
QUICK SELECT
PHONES
ON / OFF
BASS /
TREBLE
SETUP MIC
ADJUST
5V/1A
TONE CONTROL
.
AV SURROUND RECEIVER
0 Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter,
use that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front panel
Display
Rear panel
33
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an FM/AM antenna
Connect the antenna, tune in to a broadcast and then move the antenna to
the location where there is least noise. Then use tape, etc. to fix the
antenna in this location. (“Listening to FM/AM broadcasts” (v p. 47))
AM loop antenna
(supplied)
0 If you are unable to receive a good broadcast signal, we recommend installing an
outdoor antenna. For details, inquire at the retail store where you purchased the
unit.
q
NOTE
w
e
0 Make sure the AM loop antenna lead terminals do not touch metal parts of the
panel.
FM indoor antenna
(supplied)
White
.
Black
Front panel
Display
Rear panel
34
Remote
Index
Contents
Connections
Playback
Settings
Tips
o AM loop antenna assembly
o Using the AM loop antenna
1
Suspending on a wall
Suspend directly on a wall without assembling.
2
Put the stand section through the bottom of the loop
antenna from the rear and bend it forward.
Insert the projecting part into the square hole in the
stand.
Stand
Square hole
.
Nail, tack, etc.
Loop antenna
Standing alone
Use the procedure shown above to assemble.
When assembling, refer to “AM loop antenna assembly”.
.
Projecting part
.
Front panel
Display
Appendix
Rear panel
35
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
Power cord
.
To household power outlet
(AC 120 V, 60 Hz)
Front panel
Display
Rear panel
36
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Convenience functions
Basic operation
Convenience functions
52
HDMI control function
61
62
Turning the power on
38
Selecting the input source
38
Adjusting the volume of each channel to match the input source (Ch
Level Adjust)
Adjusting the volume
39
Sleep timer function
63
Turning off the sound temporarily (Muting)
39
Quick select plus function
65
Selecting a sound mode
57
Playback a device
Playing a DVD player/Blu-ray Disc player
39
Playing a USB memory device
40
Listening to music on a Bluetooth device
42
Listening to FM/AM broadcasts
47
Front panel
Display
Rear panel
37
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
Turning the power on
1
POWER X
Input source
select
buttons
Press POWER X to turn on power to the unit.
0 You can press the input source select button when the unit is in standby mode to
turn on the power.
0 You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
VOLUME df
1
MUTE :
Press the input source select button to be played back.
The desired input source can be selected directly.
.
0 You can also select the input source by turning SOURCE SELECT on the main
unit.
Front panel
Display
Rear panel
38
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
2
3
Turning off the sound temporarily
(Muting)
Press MUTE :.
4
0 MUTE indicator on the display flashes.
0 : appears on the TV screen.
Prepare for playback.
A Turn on the power of the TV, subwoofer and player.
B Change the TV input to the input of this unit.
Press POWER X to turn on power to the unit.
Press DVD/Blu-ray (4K not supported) or Blu-ray (4K
supported) to switch the input source of the player to
be played back.
Play the DVD player or Blu-ray Disc player.
o Surround playback (v p. 57)
0 The sound is reduced to the level set at “Mute Level” in the menu. (v p. 76)
0 To cancel mute, either adjust the sound volume or press MUTE : again.
Front panel
Display
Appendix
Playback a DVD player/Blu-ray Disc
player
0 The variable range differs according to the input signal and channel level setting.
0 You can also adjust the master volume by turning MASTER VOLUME on the main
unit.
1
Tips
Rear panel
39
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music files stored on a USB memory device.
0 Only USB memory devices conforming to mass storage class standards
can be played on this unit.
0 This unit is compatible with USB memory devices in “FAT16” or
“FAT32” format.
0 The audio format types and specifications supported by this unit for
playback are as follows.
See “Playing back a USB memory devices” for details. (v p. 116)
USB
0 WMA
0 MP3
0 WAV
0 MPEG-4 AAC
0 FLAC
OPTION
ui p
ENTER
BACK
.
1/3
89
Front panel
Display
Rear panel
40
Remote
Index
Connections
Contents
Playback
Settings
Playing files stored on USB memory
devices
1
2
Tips
Operation buttons
Appendix
Function
Playback / Pause
1/3
Skip to previous track / Skip to next track
89
Connect the USB memory device to the USB port.
(v p. 33)
Playback / Pause
ENTER
Press USB to switch the input source to “USB”.
(Press and hold) Fast-reverse / Fastforward
(Press and hold) Stop
Skip to previous track / Skip to next track
USB
ui
[1/2]
Folder
Music
(Press and hold) Fast-reverse / Fastforward
PAGE d f
Switch to the previous page/next page in
the list display
NOTE
0 Note that Denon will accept no responsibility whatsoever for any problems arising with
the data on a USB memory device when using this unit in conjunction with the USB
memory device.
OPTION Option
o Operations accessible through the option
menu
.
3
Use ui p to select the file to be played, then press
ENTER.
0 “Performing repeat playback (Repeat)” (v p. 53)
Playback starts.
0 “Performing random playback (Random)” (v p. 53)
0 “Adjusting the tone (Tone)” (v p. 54)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 56)
Front panel
Display
Rear panel
41
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to music on a Bluetooth device
Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.
Communication is possible up to a range of about 32.8 ft/10 m.
NOTE
0 To play back music from a Bluetooth device, the Bluetooth device needs to
support the A2DP profile.
Bluetooth
OPTION
ui
ENTER
BACK
.
1/3
89
Front panel
Display
Rear panel
42
Remote
Index
Contents
Connections
Playback
Settings
Playing music from Bluetooth device
3
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Press Bluetooth to switch the input source to
“Bluetooth”.
4
Bluetooth
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
Turn on Bluetooth from your mobile device’s
settings menu, then select
“Denon AVR-S530BT” when it appears
in the device list.
5
Cancel
Play music using any app on your Bluetooth device.
0 The Bluetooth device can also be operated with the remote
control of this unit.
0 The next time the input source is switched to Bluetooth, this unit
.
automatically connects to the last Bluetooth device that was
connected.
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing...” will appear on the display of the unit.
Activate the Bluetooth settings on your mobile device.
Front panel
Appendix
Connect to the Bluetooth device while “Pairing” is being displayed
on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
Pairing Mode
2
Tips
Display
Rear panel
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
43
Remote
Index
Contents
Connections
Operation buttons
1/3
Playback
Settings
Function
ENTER
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
(Press and hold) Fast-reverse / Fastforward
Playback / Pause
o Operations accessible through the option
menu
(Press and hold) Stop
Skip to previous track / Skip to next track
ui
Appendix
NOTE
Playback / Pause
Skip to previous track / Skip to next track
89
Tips
(Press and hold) Fast-reverse / Fastforward
0 “Pairing with other Bluetooth devices” (v p. 45)
0 “Performing repeat playback (Repeat)” (v p. 53)
0 “Performing random playback (Random)” (v p. 53)
0 “Adjusting the tone (Tone)” (v p. 54)
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
Front panel
Display
Rear panel
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 56)
44
Remote
Index
Contents
Connections
Playback
Settings
Pairing with other Bluetooth devices
3
4
5
Activate the Bluetooth settings on your mobile device.
Press OPTION when the input source is “Bluetooth”.
The option menu screen is displayed.
Use ui to select “Pairing Mode”, then press ENTER.
The device will go into the pairing mode.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
Front panel
Display
Rear panel
Appendix
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
0 Press and hold the Bluetooth on the remote control for at least 3 seconds to go
into pairing mode.
Pair a Bluetooth device with this unit.
1
2
Tips
45
Remote
Index
Contents
Connections
Playback
Settings
Tips
Reconnecting to this unit from a
Bluetooth device
After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.
1
2
3
4
If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device
to be connected.
Select this unit from the Bluetooth device list on your
Bluetooth device.
Play music using any app on your Bluetooth device.
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “BluetoothStandby” setting of this unit is set to “Auto-Select” setting of
this unit is set to “On”, and a Bluetooth device is connected with the unit in the
standby state, the power of the unit will be turned on automatically. (v p. 94)
Front panel
Display
Rear panel
46
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to FM/AM broadcasts
You can use the built-in tuner of this unit to listen to FM broadcasts and
AM broadcasts.
Make sure the FM antenna and AM loop antenna are connected to this
unit first.
FM
AM
CH/PAGE df
OPTION
uio p
ENTER
MEMORY
MODE
.
TUNE +, –
Front panel
Display
Rear panel
47
Remote
Index
Contents
Connections
Playback
Settings
Listening to FM/AM broadcasts
Use FM or AM to switch the input source to “FM” or
“AM”.
G TV screen H
4
Tuner
Press MODE to select the tune mode, then press
ENTER.
AUTO
(Default) :
Automatically search for and tune to a
receivable radio station.
MANUAL:
Manually change the frequency one
step at a time each time the button is
pressed.
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
AUTO
FM 92.1MHz
Appendix
01
TUNE+- Tune
CH d/f Preset
0 In “AUTO” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “MANUAL” mode to tune in.
0 You can also scan the broadcast station by pressing TUNE + or TUNE - on the
unit.
OPTION Option
.
2
Connect the antenna. (“Connecting an FM/AM
antenna” (v p. 34))
GDisplay of this unitH
01 FM
92.10MHz
.
1
3
Tips
Front panel
Display
Rear panel
48
Operation buttons
Function
CH/PAGE d f
Selects preset radio stations
MODE
Switching tune mode
MEMORY
Register presets
TUNE +, -
Selects the radio station (up/down)
Remote
Index
Contents
Connections
Playback
Settings
Tips
Tuning in to stations and presetting
them automatically (Auto Preset)
o Operations accessible through the option
menu
A maximum of 56 radio stations can be automatically preset.
0 “Tuning in to stations and presetting them automatically (Auto
1
Preset)” (v p. 49)
0 “Skipping preset broadcast stations (Preset Skip)” (v p. 51)
0 “Adjusting the tone (Tone)” (v p. 54)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 56)
2
Press OPTION when the input source is “FM”.
The option menu screen is displayed.
Use ui to select “Auto Preset”, then press ENTER.
The unit starts to tune in to radio stations automatically and preset
them.
0 When presetting is completed, “Completed” is displayed for about
5 seconds and the option menu screen turns off.
0 The preset memory is overwritten.
Front panel
Display
Rear panel
Appendix
49
Remote
Index
Contents
Connections
Playback
Settings
Presetting the current broadcast
station (Preset Memory)
2
3
4
Appendix
Channel
Default settings
1–8
92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10
MHz
9 – 16
94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70
MHz
17 – 24
Tune in the broadcast station you want to preset.
(“Listening to FM/AM broadcasts” (v p. 48))
98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 /
100.30 MHz
25 – 32
100.50 / 100.70 / 100.90 / 101.10 / 101.30 / 101.50 /
101.70 / 101.90 MHz
Press MEMORY.
33 – 40
103.10 / 103.30 / 103.50 / 103.70 / 103.90 / 104.10 /
104.30 / 104.50 MHz
Use ui to select the channel you want to preset.
41 – 48
104.70 / 104.90 / 105.10 / 105.30 / 105.50 / 105.70 /
105.90 / 106.10 MHz
49 – 56
106.30 / 106.50 / 106.70 / 106.90 / 107.10 / 107.30 /
107.50 / 107.90 MHz
Your favorite broadcast stations can be preset so that you can tune them
in easily.
Up to 56 stations can be preset.
1
Tips
Press MEMORY.
The current broadcast station that is preset.
0 To preset other stations, repeat steps 1 to 4.
Listening to preset stations
1
Use CH/PAGE df to select the desired preset channel.
0 You can also select preset broadcast stations by pressing TUNER PRESET CH +
or TUNER PRESET CH - on the main unit.
Front panel
Display
Rear panel
50
Remote
Index
Contents
Connections
Playback
Settings
Skipping preset broadcast stations
(Preset Skip)
2
3
1
2
Press OPTION when the input source is “FM” or “AM”.
The option menu screen is displayed.
While the “Preset Skip” screen is displayed, use ui to
select a group of a broadcast stations to cancel the
skip for.
Use o p to select “On”.
The skip is cancelled.
Use ui to select “Preset Skip”, then press ENTER.
The “Preset Skip” screen is displayed.
Use ui to select the group of broadcast stations you
want to skip.
Skip all the broadcast stations that are included in the selected
group “Preset z-z”.
(z is the selected group number.)
4
Use o p to select “Skip”.
The station you selected is not displayed.
Front panel
Display
Rear panel
Appendix
Cancelling Preset Skip
Perform auto preset memory to save all the broadcasting stations that can
be received in the memory. Selecting a broadcast station becomes easier
by skipping unnecessary memories.
1
Tips
51
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
This section explains how to use convenient functions that can be used for
each input source.
OPTION
.
uio p
ENTER
Front panel
Display
Rear panel
52
Remote
Index
Contents
Connections
Playback
Settings
Performing repeat playback (Repeat)
2
3
4
n Supported input sources : USB / Bluetooth
While content is playing, press OPTION.
1
The option menu screen is displayed.
Use ui to select “Repeat”, then press ENTER.
2
3
Use o p to select repeat playback mode.
Off
(Default):
Repeat playback mode is canceled.
One:
A file being played is played repeatedly.
All:
All files in the folder currently being
played are played repeatedly. (When
the input source is set to “Bluetooth”)
Folder:
All files in the folder currently being
played are played repeatedly. (When
the input source is set to “USB”)
4
Press ENTER.
0 “Repeat” settings are stored for each input source.
Display
While content is playing, press OPTION.
The option menu screen is displayed.
Use ui to select “Random”, then press ENTER.
Use o p to select random playback mode.
Off
(Default):
Disable random playback.
On:
Randomly play back all tracks in the
current playback folder.
Press ENTER.
The display returns to the playback screen.
0 During random playback, each time playback of a track is completed, another
track is randomly selected for playback from tracks in the folder. Therefore, it’s
possible that you may hear a track played back more than once during random
playback.
0 “Random” settings are stored for each input source.
The display returns to the playback screen.
Front panel
Appendix
Performing random playback
(Random)
n Supported input sources : USB / Bluetooth
1
Tips
Rear panel
53
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the tone (Tone)
4
Adjusts the tonal quality of the sound.
1
2
3
Press OPTION.
The option menu screen is displayed.
5
Use ui to select “Tone”, then press ENTER.
The “Tone” screen is displayed.
Tips
Appendix
Select “On” in step 3 and press i to select the sound
range to be adjusted.
Bass:
Adjust bass.
Treble:
Adjust treble.
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
Use o p to set the tone control function to on/off.
On:
Allow tone adjustment (bass, treble).
Off
(Default):
Playback without tone adjustment.
o Operating the unit
n Setting the tone control function
Press TONE CONTROL ON/OFF.
n Select the range for which to adjust the tone.
Press BASS/TREBLE.
n Adjusting the tone
Press ADJUST 0 or ADJUST 1.
0 “Tone” settings are stored for each input source.
0 This cannot be set when the sound mode is set to “Direct”.
0 You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (v p. 77)
Front panel
Display
Rear panel
54
Remote
Index
Contents
Connections
Playback
Settings
Optimizing the night time listening
volume (Night Mode)
3
Tips
Appendix
Use o p to select “Night Mode”, then press ENTER.
Compress dynamic range (difference between loud and soft sounds).
This can be set when a Dolby Digital signal is input.
Low :
Set the adjusted value to low.
Medium :
Set the adjusted value to middle.
1
High :
Set the adjusted value to high.
Auto :
Automatic dynamic range compression
on/off control according to the source.
Off
(Default):
Do not set.
2
Press OPTION.
The option menu screen is displayed.
Use ui to select “Night Mode”, then press ENTER.
The Night Mode setting screen is displayed.
0 “Auto” can be set when a Dolby TrueHD signal is input.
0 The default setting is “Off”. The default setting when the input signal is Dolby
TrueHD is “Auto”.
Front panel
Display
Rear panel
55
Remote
Index
Contents
Connections
Playback
Settings
Tips
Displaying your desired video during
audio playback (Video Select)
This unit can display video from a different source on TV during audio
playback. You can set this for each input source.
n Supported input sources :
USB / FM / AM / Bluetooth
1
2
3
4
Press OPTION during audio playback.
The option menu screen is displayed.
Use ui to select “Video Select”, then press ENTER.
Use o p to select the Video Select mode.
Off
(Default):
Disable Video Select mode.
On:
Enable Video Select mode.
Use o p to select the input source for video you want
to play back, then press ENTER.
0 “Video Select” settings are stored for each input source.
Front panel
Display
Rear panel
56
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Selecting a sound mode
This unit allows you to enjoy various kinds of surround and stereo
playback modes.
Multi-channel audio formats are provided on popular movie and music
disc formats such as Blu-ray and DVD, as well as being supported by
digital broadcasting, and even by streaming movies.
This unit supports playback of almost all of these multi-channel audio
formats. It also supports surround playback of audio formats other than
multi-channel audio such as 2-channel stereo audio.
0 For audio formats recorded on a disc, see the disc jacket or label.
Selecting a sound mode
1
Press SOUND MODE 0 1 to select a sound mode.
0 If the content played back does not support the previously selected sound mode,
the most appropriate sound mode for the content is automatically selected.
0 You can also select the sound mode by pressing SOUND MODE on the main unit.
.
SOUND MODE
01
Front panel
Display
Rear panel
57
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Description of sound mode types
Dolby sound mode
Sound mode type
Description
Dolby PLg
This mode can be selected when the Dolby PLg decoder is used to play back 2-channel sources in 5.1-channel surround
sound with an enveloping surround sound experience.
Dolby Digital
This mode can be selected when playing sources recorded in Dolby Digital.
Dolby TrueHD
This mode can be selected when playing sources recorded in Dolby TrueHD.
Dolby Digital Plus
This mode can be selected when playing sources recorded in Dolby Digital Plus.
DTS sound mode
Sound mode type
Description
DTS Neo:6
This mode can be selected when a DTS Neo:6 decoder is used to play back 2-channel source in 5.1-channel surround
sound.
DTS Surround
This mode can be selected when playing sources recorded in DTS.
DTS 96/24
This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD
This mode can be selected when playing sources recorded in DTS-HD.
DTS Express
This mode can be selected when playing sources recorded in DTS Express.
PCM multi-channel sound mode
Sound mode type
Multi Ch In
Front panel
Description
This mode can be selected when playing multi-channel PCM sources.
Display
Rear panel
58
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Original sound mode
Sound mode type
Description
Multi Ch Stereo
This mode is for enjoying stereo sound from all speakers.
Virtual
This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R)
speakers only, and when listening with stereo headphones.
Stereo sound mode
Sound mode type
Stereo
Description
This mode plays 2-channel stereo audio with no additional surround sound processing.
0 Sound is output from the front left and right speakers, and subwoofer if connected.
0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no
additional surround sound processing.
Direct sound mode
Sound mode type
Direct
Front panel
Description
This mode plays back audio as recorded in the source.
Display
Rear panel
59
Remote
Index
Contents
Connections
Playback
Settings
Tips
.
o Views on the display
q
w
A Shows a decoder to be used.
0 In the case of the Dolby Digital decoder, “x” is displayed.
0 In the case of the Dolby Digital Plus decoder, “w” is displayed.
B Shows the name of the input source being played back.
Front panel
Display
Rear panel
60
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
HDMI control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
2
3
5
Enable the HDMI control function of this unit.
Set “HDMI Control” to “On”. (v p. 78)
Turn the power on for all the devices connected by
HDMI cable.
6
Set the HDMI control function for all devices connected
by HDMI cable.
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0 Please consult the operating instructions for the connected
0 Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
devices to check the settings.
0 Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
Switch the television input to the HDMI input connected
to this unit.
Front panel
Display
Rear panel
61
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Adjusting the volume of each channel to match the input source (Ch Level Adjust)
The volume of each channel can be changed while listening to music. You
can set this for each input source.
1
2
3
Press CH LEVEL.
The “Ch Level Adjust” screen is displayed.
Use ui to select the channel that you wish to adjust.
Use o p to adjust the volume.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 Select “Reset” and press ENTER if you want to restore the adjustment values of
the various channels to “0.0 dB” (default).
0 Headphone volume can be adjusted when a headphone is connected.
0 “Ch Level Adjust” settings are stored for each input source.
0 You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu “HDMI Audio Out” is set to “TV”. (v p. 77)
uio p
.
CH LEVEL
Front panel
Display
Rear panel
62
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Sleep timer function
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for viewing and listening while going to
sleep.
.
SLEEP
Front panel
Display
Rear panel
63
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Checking the remaining time
Using the sleep timer
1
Tips
Press SLEEP when the sleep timer is in operation.
The remaining time appears on the display.
Press SLEEP and display the time you want to set.
o To cancel the sleep timer
0 The SLEEP indicator lights up on the display and the sleep timer
starts.
0 You can set the sleep timer in the range from 10 to 120 minutes in
steps of 10 minutes.
Press SLEEP to select “Off”.
The SLEEP indicator on the display turns off.
0 You can also set the sleep timer by pressing SLEEP on the main unit.
0 The sleep timer setting is canceled when the unit switches to standby mode.
NOTE
0 The sleep timer function cannot turn off the power of devices connected to this
unit. To turn off the power of those connected devices, set up sleep timers on the
connected devices themselves.
Front panel
Display
Rear panel
64
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Quick select plus function
Settings such as the input source, volume level and sound mode can be
registered to the QUICK SELECT 1 - 4 buttons.
You can simply press one of the registered QUICK SELECT buttons in
subsequent playbacks to switch to the group of saved settings in a batch.
By saving frequently used settings at the QUICK SELECT 1 – 4 buttons,
you will always be able to easily call up the same playback environment.
.
QUICK
SELECT
1–4
Front panel
Display
Rear panel
65
Remote
Index
Contents
Connections
Playback
Settings
1
Press QUICK SELECT.
The Quick Select settings registered to the button you pressed are
called up.
below.
Button
Input source
Volume
QUICK SELECT 1
CBL/SAT
40
QUICK SELECT 2
DVD/Blu-ray
40
QUICK SELECT 3
Game
40
QUICK SELECT 4
Bluetooth
40
Display
Rear panel
Set the items below to the settings you want to
register.
A Input source (v p. 38)
B Volume (v p. 39)
C Video Select settings (v p. 56)
D Sound mode (v p. 57)
0 The default settings for the input source and volume are as shown
Front panel
Appendix
Changing the settings
Calling up the settings
1
Tips
2
Press and hold the desired QUICK SELECT until
“Quickz Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
66
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items
Detailed items
Description
Page
Adjusts surround sound parameters.
71
Restorer
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
74
Audio Delay
Compensates for incorrect timing between video and audio.
75
Volume
Make volume settings.
75
Room EQ
Set whether to use the equalizer or not.
76
HDMI Audio Out
Select HDMI audio output device.
77
HDMI PassThrough
Selects how this unit will pass HDMI signals to the HDMI output in standby power mode.
77
Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
78
HDMI Control
You can link operations with devices connected to HDMI and compatible with HDMI
Control.
78
ARC
On the TV connected to the HDMI MONITOR connector, set whether to receive sound
from the TV via HDMI.
79
TV Audio Switching
Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends
an appropriate CEC control command to this unit.
79
Pow.Off Control
Links the power standby of this unit to external devices.
80
.
Surr.Parameter
Audio
.
Video
Front panel
Display
Rear panel
67
Remote
Index
Contents
Playback
Settings
Detailed items
Tips
Description
Appendix
Page
Input Assign
Changes input connector assignment.
81
Source Level
Adjusts the playback level of the audio input.
81
Input Select
Sets the audio input mode and decode mode.
82
Auto Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
83
Manual Setup
Sets up the speakers manually or changes the “Auto Setup” settings.
88
.
Setting items
Connections
Inputs
.
Speakers
Front panel
Display
Rear panel
68
Remote
Index
Contents
Connections
.
Setting items
Settings
Detailed items
Tips
Page
Language
Changes the language of the display on the TV screen.
92
ECO
Configures the ECO Mode and Auto Standby energy-saving functions.
92
Bluetooth
Configures the Bluetooth settings.
94
Front Display
Makes settings related to the display on this unit.
95
Firmware
Update the firmware of this unit.
95
Setup Lock
Protects settings from inadvertent changes.
Begin Setup...
Performs basic installation/connections/settings from the beginning according to the
guidance indicated on the TV screen.
96
Setup Assistant
Front panel
Appendix
Description
.
General
Playback
Display
Rear panel
69
Remote
Index
Page 7 of
the separate
manual
“Quick Start
Guide”
Contents
Connections
Playback
Settings
Tips
Appendix
Menu operations
1
2
3
4
Press SETUP.
The menu is displayed on the TV screen.
Use ui to select the menu to be set or operated, then
press ENTER.
Use o p to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press BACK.
0 Exiting the menu, press SETUP while the menu is displayed. The
menu display disappears.
uio p
ENTER
SETUP
.
BACK
Front panel
Display
Rear panel
70
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Audio
Make audio-related settings.
o Mode
Surr.Parameter
Set the sound mode according to the input signal.
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v p. 120).
n Dolby PLg Mode
0 Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0 “Surr.Parameter” settings are stored for each sound mode.
Cinema :
Switches to the sound mode suitable for
enjoying movies and TV programs.
Music :
Switches to the sound mode suitable for
enjoying music.
Game :
Switches to the sound mode suitable for
enjoying games.
Pro Logic :
Dolby Pro Logic playback mode.
n DTS Neo: 6 mode
Cinema :
Switches to the sound mode suitable for
enjoying movies and TV programs.
Music :
Switches to the sound mode suitable for
enjoying music.
0 “Music” mode is also effective for video sources that contain a lot of stereo
music.
Front panel
Display
Rear panel
71
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Low Frequency
o Dynamic Comp.
Adjust the low frequency effects level (LFE).
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High:
These set the compression level.
Off:
Dynamic range compression is always
off.
-10 dB – 0 dB (Default : 0 dB)
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
0 “Auto” can only be set when Dolby TrueHD signals are input.
o Center Image
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0 (Default : 0.3)
0 You can set this when the sound mode is DTS Neo:6 in the “Music” mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
Front panel
Display
Rear panel
72
Remote
Index
Contents
Connections
Playback
Settings
o Panorama
Tips
Appendix
o Dimension
The front sound field is expanded further towards the back to create a
seamlessly inclusive sound impression.
On:
Use “Panorama”.
Off
(Default):
Do not use “Panorama”.
Shift sound image center to front or rear to adjust playback balance.
0 – 6 (Default : 3)
0 You can set this when the sound mode is Dolby PLg in the “Music” mode.
0 As you set a smaller number, the surround sound field shifts backward; as you
set a larger number, the surround sound field shifts forward.
0 You can set this when the sound mode is Dolby PLg in the “Music” mode.
o Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
0 You can set this when the sound mode is Dolby PLg in the “Music” mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
Front panel
Display
Rear panel
73
Remote
Index
Contents
Connections
Playback
Settings
o Subwoofer
Tips
Appendix
Restorer
Turn subwoofer output on and off.
On
(Default):
The subwoofer is used.
Off:
The subwoofer is not used.
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “Restorer”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
0 This can be set when the surround mode is set to “Direct” or “Stereo”.
o Set Defaults
The “Surr.Parameter” settings are returned to the default settings.
On:
Use “Restorer”.
Off
(Default):
Do not use “Restorer”.
0 This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48
kHz) is input.
0 This cannot be set when the sound mode is set to “Direct”.
0 “Restorer” settings are stored for each input source.
Front panel
Display
Rear panel
74
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Limit
Audio Delay
Make a setting for maximum volume.
Compensates for incorrect timing between video and audio.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
0 ms – 200 ms (Default : 0 ms)
Off (Default)
0 “Audio Delay” settings are stored for each input source.
0 The “Audio Delay” settings can be set even if AUDIO DELAY + or AUDIO DELAY is pressed on the remote control unit.
0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
(v p. 75)
o Power On Level
Volume
Define the volume setting that is active when the power is turned on.
Make volume settings.
o Scale
Set how volume is displayed.
0 - 98
(Default):
Display in the range 0 (Min) to 98.
–79.5 dB – 18.0 dB:
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
Front panel
Tips
Display
Rear panel
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always use the muting on condition when
power is turned on.
1 – 98 (–79 dB – 18 dB) :
The volume is adjusted to the set level.
0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
(v p. 75)
75
Remote
Index
Contents
Connections
Playback
Settings
o Mute Level
Tips
Appendix
Room EQ
Set the amount of attenuation when muting is on.
Set whether to use the equalizer or not.
Full
(Default):
The sound is muted entirely.
On:
Use “Room EQ”.
–40 dB :
The sound is attenuated by 40 dB down.
Do not use “Room EQ”.
–20 dB :
The sound is attenuated by 20 dB down.
Off
(Default):
0 Speakers for which “Room EQ” can be set differ according to the sound mode.
Front panel
Display
Rear panel
76
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Video
Make settings for HDMI Audio Out, HDMI PassThrough and HDMI Control settings.
NOTE
0 When “HDMI PassThrough” and “HDMI Control” is set to “On”, it consumes more standby power. (“HDMI PassThrough” (v p. 77), “HDMI Control” (v p. 78)) If you are
not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
HDMI Audio Out
HDMI PassThrough
Select HDMI audio output device.
AVR
(Default):
Play back through speakers connected to
the unit.
TV:
Play back through TV connected to the unit.
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
0 When the HDMI control function is activated, priority is given to the TV audio
setting. (v p. 61)
0 When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
Front panel
Display
Rear panel
77
On
(Default):
Transmits the selected HDMI input through
this unit’s HDMI output when this unit is in
standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
Remote
Index
Contents
Connections
Playback
Settings
Pass Source
Tips
Appendix
HDMI Control
You can link operations with devices connected to HDMI and compatible
with HDMI Control.
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
The most recently used input source will go
into standby mode.
CBL/SAT /
DVD/Blu-ray /
Game / Media Player
(Default : CBL/SAT):
Pass through the selected input source.
On:
Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0 Please consult the operating instructions for each connected device to check the
settings.
0 Refer to “HDMI control function” for more information about the HDMI control
function. (v p. 61)
0 “Pass Source” can be set when “HDMI PassThrough” is set to “On” or “HDMI
Control” is set to “On”. (“HDMI PassThrough” (v p. 77), “HDMI
Control” (v p. 78))
NOTE
0 If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
Front panel
Display
Rear panel
78
Remote
Index
Contents
Connections
Playback
Settings
ARC
Tips
Appendix
TV Audio Switching
On the TV connected to the HDMI MONITOR connector, set whether to
receive sound from the TV via HDMI.
Sets automatic switching to the “TV Audio” input when a TV connected via
HDMI sends an appropriate CEC control command to this unit.
On:
Use ARC function.
Off
(Default):
Do not use ARC function.
On
(Default):
Select the “TV Audio” input automatically
when receiving a command from the TV.
Off:
Do not select the “TV Audio” input
automatically when receiving a command
from the TV.
0 You can adjust the volume of this unit using the TV remote control.
0 If using this function, use a TV compatible with ARC (Audio Return Channel) and
enable the HDMI control function of the TV.
0 When “HDMI Control” is set to “On”, the “ARC” settings automatically switch “On”.
(v p. 78)
0 “TV Audio Switching” can be set when “HDMI Control” is set to “On”. (v p. 78)
NOTE
0 If the “ARC” settings have been changed, always reset the power to connected
devices after the change.
Front panel
Display
Rear panel
79
Remote
Index
Contents
Connections
Playback
Settings
Tips
Pow.Off Control
Links the power standby of this unit to external devices.
All
(Default):
If power to a connected TV is turned off
independently of the input source, power to
this unit is automatically set to standby.
Video:
With an input source being selected that is
equipped “HDMI”, when you turn the power
of the TV off, power to this unit is
automatically set to standby.
Off:
This unit does not link with power to a TV.
0 “Pow.Off Control” can be set when “HDMI Control” is set to “On”. (v p. 78)
Front panel
Display
Rear panel
80
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Inputs
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Input Assign
0 By default, each item is set as follows.
By making connections as indicated by the input sources printed on the
audio/video input connectors of this unit, you can just press one of the
input source select buttons to easily play back audio or video from a
connected device.
Please change the assignment of the digital audio input connector when
connecting an input source that differs from that printed to the audio/video
input terminals of this unit.
Input source
Input connector
DVD/
Bluray
Media
Player
Bluray
Game
OPTICAL1
COAXIAL
TV
Audio
S
OPTICAL2
S
S
o Set Defaults
Input Assign
OPTICAL1
OPTICAL2
COAXIAL
Set Defaults
CBL/
SAT
The “Input Assign” settings are returned to the default settings.
TV Audio
Media Player
CBL/SAT
Source Level
.
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
-12 dB – +12 dB (Default : 0 dB)
0 “Source Level” settings are stored for each input source.
Front panel
Display
Rear panel
81
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Decode Mode
Input Select
Set the audio decode mode for input source.
It is normally recommended to set the audio input mode to “Auto”. But
we recommend changing it to “PCM” or “DTS” if the start of the source
is clipped or noise occurs.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input
source.
0 “Input Select” settings are stored for each input source.
o Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to “Auto”.
Auto
(Default):
Automatically detect input signal and
perform playback.
HDMI:
Play only signals from HDMI input.
Digital:
Play only signals from digital audio input.
Analog:
Play only signals from analog audio input.
Auto
(Default):
Detect type of digital audio input signal
and decode and play automatically.
PCM:
Decode and play only PCM input signals.
DTS:
Decode and play only DTS input signals.
0 This item can be set for input sources for which the HDMI input connector is
assigned or for which “COAXIAL”, “OPTICAL1” or “OPTICAL2” is assigned
under “Input Assign” in the menu. (v p. 81)
0 When digital signals are properly input, the ~ indicator lights on the display.
If the ~ indicator does not light, check “Input Assign” and the connections.
(v p. 81)
0 If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose input
source is “TV Audio” is fixed to ARC.
Front panel
Appendix
Display
Rear panel
82
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
“Auto Setup”.
You do not have to perform “Auto Setup” when you have already performed “Speaker Setup” in “Setup Assistant”.
To set up the speakers manually, use “Manual Setup” on the menu. (v p. 88)
Auto Setup
o About the main listening position
To perform measurement, place the Sound calibration microphone in the
main listening position.
.
The main listening position is the position where listeners would
normally sit or where one would normally sit alone within the listening
environment. Before starting “Auto Setup”, place the Sound calibration
microphone in the main listening position.
FL SW C
SL
FR
Main listening position
Front panel
FL
FR
C
SW
SL
SR
Front speaker (L)
Front speaker (R)
Center speaker
Subwoofer
Surround speaker (L)
Surround speaker (R)
SR
Display
Rear panel
83
Remote
Index
Contents
Connections
Playback
Settings
Tips
NOTE
0 Make the room as quiet as possible. Background noise can disrupt the room
measurements. Close windows and turn off the power on electronic devices
(radios, air conditioners, fluorescent lights, etc.). The measurements could be
affected by the sounds emitted by such devices.
0 During the measurement process, place cell phones outside the listening room.
Cell phone signals could disrupt the measurements.
0 Do not stand between the speakers and Sound calibration microphone or allow
obstacles in the path while the measurements are being made. Also, install the
Sound calibration microphone at least 20 inches (50 cm) away from the wall.
Failure to do so will result in inaccurate readings.
0 During the measurement process, audible test tones will come from the speakers
and subwoofer(s), but this is part of normal operation. If there is background noise
in the room, these test signals will increase in volume.
0 Measurement cannot be performed when headphones are connected. Unplug the
headphones before performing “Auto Setup”.
Front panel
Display
Rear panel
84
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Procedure for speaker settings (Auto
Setup)
1
Tips
Appendix
Mount the Sound calibration microphone on a tripod
and place it in the main listening position.
When installing the Sound calibration microphone, point the tip of
the microphone toward the ceiling and adjust the height to match the
height of the ears of a listener in a seated position.
Preparation
2
Measurement
If using a subwoofer capable of the following
adjustments, set up the subwoofer as shown below.
n When using a subwoofer with a direct mode
Set the direct mode to “On” and disable the volume adjustment
and crossover frequency setting.
Finish
.
n When using a subwoofer without a direct mode
Make the following settings:
0 Volume : 12 o’clock position
0 Crossover frequency : Maximum/Highest Frequency
0 Low pass filter : Off
0 Standby mode : Off
Front panel
Display
Rear panel
85
Remote
Index
Contents
3
Connections
Playback
Settings
5
6
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
Tips
Appendix
Select “Next”, then press ENTER.
Select “Begin Test”, then press ENTER.
0 Measurement requires several minutes.
NOTE
0 If “Caution!” is displayed on TV screen:
0 Go to “Error messages” (v p. 87). Check any related items,
and perform the necessary procedures.
n To cancel Auto Setup
When the Sound calibration microphone is
connected, the following screen is displayed.
.
A Press BACK to display the popup screen.
B Press o to select “Yes”, then press ENTER.
7
Auto Setup
Unplug the Setup and measurement microphone from
the unit’s SETUP MIC jack.
Do not change the speaker connection or subwoofer volume after
“Auto Setup”. If these are changed, run “Auto Setup” again in order
to configure the optimum equalizer settings.
Your AVR can automatically measure the
acoustics of your room and the optimize
your speakers.
.
Start
4
Select “Start”, then press ENTER.
Front panel
Display
Rear panel
86
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Error messages
An error message is displayed if “Auto Setup” could not be completed due to speaker placement, the measurement environment, etc. If an error message
is displayed, perform the necessary measures. Be sure to turn off the power before checking speaker connections.
Examples
Front L: None
Front panel
Error details
Measures
0 The displayed speaker could not be detected.
Display
Rear panel
0 Check the connections of the displayed speaker.
87
Remote
Index
Contents
Connections
Playback
Settings
Manual Setup
Tips
Appendix
Speaker Config.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
Perform when setting the speakers manually or when changing settings
made in “Auto Setup”.
0 This unit can be used without changing “Manual Setup” settings. Please
set if necessary.
o Front
Set the front speaker size.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0 When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
0 When “Front” is set to “Small”, “Center” and “Surround” can not be set to
“Large”.
Front panel
Display
Rear panel
88
Remote
Index
Contents
Connections
Playback
Settings
o Center
Appendix
Distances
Set the presence and size of the center speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when a center speaker is not
connected.
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o Step
Set the unit of distance.
1 ft / 0.1 ft (Default : 1 ft)
o Subwoofer
o Set Defaults
Set the presence of a subwoofer.
The “Distances” settings are returned to the default settings.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
o Set the distance
0.0 ft – 60.0 ft
o Surround
0 The speakers that can be selected differ depending on the “Speaker Config.”
settings. (v p. 88)
0 Default settings :
Front L / Front R / Center / Subwoofer:12.0 ft
Surround L / Surround R:10.0 ft
0 Set the difference in the distance between the speakers to less than 20.0 ft.
Set the presence and size of the surround speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround speakers are
not connected.
Front panel
Tips
Display
Rear panel
89
Remote
Index
Contents
Connections
Playback
Settings
Levels
Tips
Appendix
Crossovers
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker.
o Test Tone Start
o Set the crossover frequency
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 “Crossovers” can be set when the “Subwoofer Mode” setting is “LFE+Main”, or
when you have a speaker that is set to “Small”. (v p. 91)
0 The default crossover frequency is “80 Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
0 Sounds below crossover frequency is cut off in the output from the speaker set
up in “Small”. The cut off bass frequencies is output from the sub-woofer or
front speaker.
0 The set “Levels” are reflected in all sound modes.
0 When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
o Set Defaults
The “Levels” settings are returned to the default settings.
Front panel
Display
Rear panel
90
Remote
Index
Contents
Connections
Playback
Settings
Tips
o LPF for LFE
Bass
Set LFE signal playback range. Set this when you want to change the
playback frequency (low pass filter point) of the subwoofer.
Set subwoofer and LFE signal range playback.
o Subwoofer Mode
80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz/ 150 Hz /
200 Hz / 250 Hz (Default: 100 Hz)
Select low range signals to be reproduced by subwoofer.
LFE:
The low range signal of the channel set to
“Small” speaker size is added to the LFE
signal output from the subwoofer.
LFE+Main
(Default):
The low range signal of all channels is
added to the LFE signal output from the
subwoofer.
0 “Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” is set to
other than “No”. (v p. 89)
0 Play music or a movie source and select the mode offering the strongest bass.
0 If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer
Mode” is set to “LFE”, no sound may be output from the subwoofers,
depending on the input signal or selected sound mode. (v p. 88)
Select “LFE+Main” if you want the bass signals to always be produced from
the subwoofer.
Front panel
Appendix
Display
Rear panel
91
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
Language
ECO
Set the language for display the menu on the TV screen.
Configure the settings of the ECO Mode and auto standby mode.
English / Français / Español (Default : English)
o ECO Mode
This mode can reduce the power consumption when the power of the
unit is on.
0 “Language” can also be set up by the following operation. However, the menu
screen is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s TUNER PRESET CH +, TUNER PRESET CH and TUNE - for at least 3 seconds.
“V.Format:< NTSC>” appears on the display.
2. Press the main unit’s TUNE +.
“Lang.:<ENGLISH >” appears on the display.
3. Use the main unit’s TUNER PRESET CH + or TUNE - and set the language.
4. Press TUNER PRESET CH - to enter the setting.
On:
The power consumption is always
reduced, regardless of the volume.
Auto:
The power consumption is automatically
reduced to match the volume.
Off
(Default):
Do not reduce the power consumption.
0 When you want to output audio at a high volume level, it is recommended to
set “ECO Mode” to “Off”.
0 Eco mode can also be switched by pressing ECO G on the remote control
unit.
Front panel
Display
Rear panel
92
Remote
Index
Contents
Connections
Playback
Settings
o Pow.On Default
Appendix
o Auto Standby
Set the mode to ECO when the power is on.
Last
(Default):
The ECO Mode will be set to the previous
setting before the power was switched
off.
On:
When power is turned on, the mode will
always be switched to the “ECO Mode” in
“On”.
Auto:
When power is turned on, the mode will
always be switched to the “ECO Mode” in
“Auto”.
Off:
When power is turned on, the mode will
always be switched to the “ECO Mode” in
“Off”.
Front panel
Tips
Display
Rear panel
Set so the unit power automatically switches to standby.
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
93
60 min:
The unit goes into standby after 60 minutes.
30 min:
The unit goes into standby after 30 minutes.
15 min:
The unit goes into standby after 15 minutes.
Off
(Default):
The unit does not go into standby
automatically.
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Auto-Select
Bluetooth
Set whether to automatically switch the source input to “Bluetooth”
when performing the connection operation from a Bluetooth device.
Configures the Bluetooth settings.
o BluetoothStandby
Set whether or not to turn the unit’s power on when a Bluetooth device
is operated.
On
(Default):
Turns the Bluetooth standby function on.
Off:
Turns the Bluetooth standby function off.
On
(Default):
Select the “Bluetooth” source input
automatically when a Bluetooth device
connects to this unit.
Off:
Do not select to the “Bluetooth” source
input when a Bluetooth device connects
to this unit.
0 Set “Auto-Select” to “Off” if you do not want the source input of this unit to
automatically switch to “Bluetooth” when connecting the “Denon 500 Series
Remote” app to this unit.
0 Some Bluetooth devices may automatically connect to this unit when they
enter this unit’s communication range. If this happens, setting “Auto-Select” to
“Off” will prevent unintended actions such as turning on this unit or switching
the source input to “Bluetooth”.
0 When the “BluetoothStandby” setting is “On” and the connection operation is
performed on a Bluetooth device when this unit is in the standby state, this
unit’s power automatically switches on. In order to use this operation, the
device needs to be paired with this unit in advance.
NOTE
0 When using the “Denon 500 Series Remote” app, use with the
“BluetoothStandby” setting set to “On”.
Front panel
Appendix
Display
Rear panel
94
Remote
Index
Contents
Connections
Playback
Settings
Tips
Firmware
Front Display
When new firmware is supplied, update this unit using the USB port.
Use a USB memory device to update the firmware.
Adjust the display brightness of this unit.
o Dimmer
Bright
(Default):
Normal display brightness.
Dim:
Reduced display brightness.
Dark:
Very low display brightness.
Off:
Turns the display off.
o Update Start
Start the firmware update.
To update the firmware, connect the USB memory device to the USB
port on this unit.
0 When the display brightness is set to “Off”, the display turns off as in the
standby state.
0 You can also adjust the display by pressing DIMMER on the main unit.
Front panel
Appendix
Display
Rear panel
95
Remote
Index
Contents
Connections
Playback
Settings
Tips
Setup Lock
Protect settings from inadvertent changes.
o Lock
On:
Turn protection on.
Off
(Default):
Turn protection off.
0 Perform the following operations to set “Lock” to “Off”.
1. Press and hold SETUP for more than 3 seconds.
“Setup Lock:0On1” appears on the display.
2. Use o p to select “Off”, then press ENTER.
NOTE
0 When “Lock” is set to “On”, no setting items are displayed except for “Setup
Lock”.
Front panel
Display
Rear panel
96
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Checking the information
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
1
Press INFO.
The information screen is displayed.
0 Press INFO to display current input source name, volume, sound mode, and other
information at the bottom of the screen.
INFO
SOURCE
SOURCE
SOUND
ROOM EQ
Bluetooth
Multi Ch Stereo
Digital
Off
.
40.0
NOTE
0 The status display screen cannot be displayed when playing the following video
signals.
.
0 Computer resolution video
0 Video with an aspect ratio other than 16:9 or 4:3
0 4K video
Front panel
Display
Rear panel
97
Remote
Index
Contents
Connections
Playback
Settings
o Contents
Appendix
Troubleshooting
Power does not turn on / Power is turned off
101
Operations cannot be performed through the remote control unit
102
Display on this unit shows nothing
102
No sound comes out
103
Desired sound does not come out
104
Sound is interrupted or noise occurs
106
99
No video is shown on the TV
107
99
The menu screen is not displayed on the TV
108
Tips
I want the volume not to become too loud by mistake
99
I want to keep the volume at the same level when I turn the power on
99
I want to have the subwoofer always output audio
99
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a new
one
I want to combine a desired video with the current music
Front panel
Tips
Display
Rear panel
98
USB memory devices cannot be played back
109
File names on the USB memory device are not displayed properly
110
Bluetooth cannot be played back
110
The HDMI control function does not work
111
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
I want the volume not to become too loud by mistake
0 Set the volume upper limit for “Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
(v p. 75)
I want to keep the volume at the same level when I turn the power on
0 By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume
level, set the volume level at power on for “Power On Level” in the menu. (v p. 75)
I want to have the subwoofer always output audio
0 Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Mode” in the menu is set to “LFE+Main”, you
can have the subwoofer always output audio. (v p. 91)
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new
one
0 Perform “Auto Setup”. This automatically makes the optimized speaker settings for the new listening environment. (v p. 83)
I want to combine a desired video with the current music
0 Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from a Set-top Box or DVD, etc. while
listening to music from Tuner. (v p. 56)
Front panel
Display
Rear panel
99
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem.
Continue pressing the X button on the unit until “Restart” appears in the display, or remove and re-insert the power cord of the unit.
If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power
immediately and contact the store where you purchased this unit.
Front panel
Display
Rear panel
100
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
36
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
63
0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
93
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
126
0 Please re-install this unit in a place having good ventilation.
-
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0 Check the speaker connections. The protection circuit may have been activated because speaker cable
22
0 Turn down the volume and turn on the power again.
38
0 This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.
-
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
Front panel
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
Display
Rear panel
101
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
Page
0 Batteries are worn out. Replace with new batteries.
6
0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within
6
30°.
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the q and w marks.
6
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
-
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
o Display on this unit shows nothing
Symptom
Display is off.
Front panel
Cause / Solution
Page
0 Press the DIMMER button on this unit or remote control unit to set the display brightness to a setting other
95
than “Off”.
Display
Rear panel
102
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound comes out of
speakers.
Cause / Solution
Page
0 Check the connections for all devices.
22
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the
22
0 Securely tighten the speaker terminals. Check speaker terminals for looseness.
22
0 Check that a proper input source is selected.
38
0 Adjust the volume.
39
0 Cancel the mute mode.
39
0 Check the digital audio input connector setting.
81
0 Check the digital audio output setting on the connected device. On some devices, the digital audio output
-
0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
12
0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
-
metal part on speaker terminals.
is set to off by default.
speaker terminal and SUBWOOFER connector.
No sound comes out when
using the DVI-D
connection.
Front panel
separate audio connection.
Display
Rear panel
103
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Desired sound does not come out
Symptom
The volume does not
increase.
Cause / Solution
Page
0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu.
75
0 Appropriate volume correction processing is performed according to the input audio format and settings,
-
0 Check the connection of the HDMI connectors.
26
0 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output
77
so the volume may not reach the upper limit.
No sound comes out with
the HDMI connection.
from the TV, set “TV”.
No sound comes out of a
specific speaker.
0 Check that speaker cables are properly connected.
22
0 Check that a selection other than “None” is set for the “Speaker Config.” setting in menu.
88
0 When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and
subwoofer.
-
No sound is produced from 0 Check the subwoofer connections.
subwoofer.
0 Turn on the subwoofer’s power.
23
-
0 Set “Speaker Config.” - “Subwoofer” on the menu to “Yes”.
88
0 When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the
88
0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the
91
sound mode, no sound may be output from the subwoofer.
subwoofer.
0 You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”.
91
DTS sound is not output.
0 Check that the digital audio output setting on the connected device is set to “DTS”.
-
0 Set “Decode Mode” on the menu to “Auto” or “DTS”.
82
Dolby TrueHD, DTS-HD,
Dolby Digital Plus audio is
not output.
0 Make HDMI connections.
30
0 Check the digital audio output setting on the connected device. On some devices, “PCM” is set by default.
-
Dolby PLg mode or DTS
Neo:6 mode cannot be
selected.
0 It cannot be selected when “None” is set for “Speaker Config.” - “Center” and “Surround”.
89
0 Dolby PLg or DTS Neo:6 cannot be selected when using headphones.
-
Front panel
Display
Rear panel
104
Remote
Index
Contents
Connections
Playback
Symptom
“Restorer” cannot be
selected.
Front panel
Settings
Tips
Cause / Solution
Appendix
Page
0 Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of
74
0 Switch to a sound mode other than “Direct”.
57
multichannel signals such as Dolby Digital or DTS surround, “Restorer” cannot be used.
Display
Rear panel
105
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
Cause / Solution
Page
During playback from the
USB memory device,
sound is occasionally
interrupted.
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
-
Noise often occurs in
FM/AM broadcasting.
0 Change the antenna orientation or position.
34
The sounds appear to be
distorted.
0 Separate the AM loop antenna from the unit.
-
0 Use an outdoor antenna.
34
0 Separate the antenna from other connection cables.
34
0 Lower the volume.
39
0 Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
92
the playback volume is high.
Front panel
Display
Rear panel
106
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No video is shown on the TV
Symptom
No picture appears.
0 Check the connections for all devices.
Cause / Solution
Page
26
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Match the input settings to the input connector of the TV connected to this unit.
81
0 Check that the proper input source is selected.
38
0 Check the video input connector setting.
81
0 Check that the resolution of the player corresponds to that of the TV.
-
0 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
No video is shown on the
TV with the DVI-D
connection.
While the menu is being
displayed, no video is
shown on the TV.
Front panel
compatible with HDCP, video will not be output correctly.
0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with
HDCP 2.2 only.
0 To enjoy 4K content or content that is copyright protected by HDCP 2.2, connect the device to the HDMI
3, HDMI 4 or HDMI 5 input connector.
0 With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
0 The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video contents
- 4K video
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
Display
Rear panel
107
Remote
Index
115
-
-
115
-
Contents
Connections
Playback
Settings
Tips
Appendix
o The menu screen is not displayed on the TV
Symptom
The menu screen or status
information screen is not
displayed on the TV.
Cause / Solution
Page
0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
-
0 The status information will not appear on the TV when the following video signals are being played.
97
0 When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
-
connected to a TV using a different video output connector, operate while watching the display on this
unit.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K video
not properly displayed.
Front panel
Display
Rear panel
108
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No connection” is
displayed.
Cause / Solution
Page
0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device.
33
0 Mass storage class compatible USB memory devices are supported.
-
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
-
0 The USB memory device must be formatted to FAT16 or FAT32.
-
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
-
the USB port.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files on the USB memory
device are not displayed.
0 Files of a type not supported by this unit are not displayed.
40
0 This unit is able to display files within a maximum of 16 folder layers and up to 999 files (folders). Modify
-
the folder structure of the USB memory device.
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
-
iOS and Android devices
are not supported.
0 The USB port of this unit does not support playback from iOS and Android devices.
-
Files on a USB memory
device cannot be played.
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
116
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
0 FLAC 96kHz/24bit uncompressed and low compressive file cannot be played back on this unit. Check the
-
played on this unit.
formats supported by this unit.
Front panel
Display
Rear panel
109
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o File names on the USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“...”,
etc.).
Cause / Solution
Page
0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed
are replaced with a “. (period)”.
-
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
be connected to this unit.
The sound is cut off.
Cause / Solution
Page
0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
-
0 Bring the Bluetooth device near to this unit.
-
Bluetooth device to enable the Bluetooth function.
0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
-
0 Turn the power of the Bluetooth device off and on again, and then try again.
-
0 Bring the Bluetooth device near to this unit.
-
0 Remove obstructions between the Bluetooth device and this unit.
-
0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
-
0 Reconnect the Bluetooth device.
-
devices and other Bluetooth devices.
Front panel
Display
Rear panel
110
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The HDMI control function does not work
Symptom
The HDMI control function
does not work.
Cause / Solution
Page
0 Check that “HDMI Control” in the menu is set to “On”.
78
0 You cannot operate devices that are not compatible with the HDMI control function. In addition,
61
0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
61
0 When you make connection related changes such as connecting an additional HDMI device, the link
61
depending on the connected device or the settings, the HDMI control function may not work. In this case,
operate the external device directly.
operation settings may be initialized. Turn off this unit and devices connected via HDMI, and turn them on
again.
Front panel
Display
Rear panel
111
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
X
1
2
TUNER PRESET CH +
.
3
Front panel
Turn off the power using X.
Press X while simultaneously pressing SOUND
MODE 1 and TUNER PRESET CH +.
Release the two buttons when the display starts
flashing at intervals of about 1 second.
SOUND MODE
Display
Rear panel
112
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
About HDMI
HDMI is an abbreviation of High-Definition Multimedia Interface, which is
an AV digital interface that can be connected to a TV or amplifier.
With the HDMI connection, high definition video and high quality audio
formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby
TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not
possible with the analog video transmission.
Furthermore, in the HDMI connection, audio and video signals can be
transmitted through a single HDMI cable, while in conventional
connections it is necessary to provide audio and video cables separately
for connection between devices. This allows you to simplify the wiring
configuration that tends to be quite complex in a home theater system.
This unit supports the following HDMI functions.
0 3D
This unit supports input and output of 3D (3 dimensional) video signals
of HDMI. To play back 3D video, you need a TV and player that
provide support for the HDMI 3D function and a pair of 3D glasses.
0 4K
This unit supports input and output of 4K (3840 x 2160 pixels) video
signals of HDMI.
0 Content Type
It automatically makes settings suitable for the video output type
(content information).
0 Adobe RGB color, Adobe YCC601 color
0 Deep Color
The color space defined by Adobe Systems Inc. Because it is a wider
color space than RGB, it can produce more vivid and natural images.
An imaging technology supported by HDMI. Unlike RGB or YCbCr,
which uses 8 bits (256 shades) per color, it can use 10 bits (1024
shades), 12 bits (4096 shades), or 16 bits (65536 shades) to produce
colors in higher definition.
Both devices linked via HDMI must support Deep Color.
0 sYCC601 color
Each of these color spaces defines a palette of available colors that is
larger than the traditional RGB color model.
0 HDMI Pass Through
0 x.v.Color
Even when the power to this unit is set to standby, signals input from
the HDMI input connector are output to a TV or other device that is
connected to the HDMI output connector.
This function lets HDTVs display colors more accurately. It enables
display with natural, vivid colors.
“x.v.Color” is trademark of Sony Corporation.
Front panel
Display
Rear panel
113
Remote
Index
Contents
Connections
Playback
Settings
0 HDMI Control
0 ARC (Audio Return Channel)
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
0 Power off link
This unit power off can be linked to the TV power off step.
0 Audio output destination switching
From the TV, you can switch whether to output audio from the TV or
the AV amplifier.
0 Volume adjustment
You can adjust this unit’s volume in the TV volume adjustment
operation.
0 Input source switching
You can switch this unit input sources through linkage to TV input
switching.
When playing the player, this unit input source switches to the
source for that player.
Front panel
Display
Rear panel
Tips
Appendix
This function transmits audio signals from the TV to this unit through
the HDMI cable and plays back the audio from the TV on this unit
based on the HDMI control function.
If a TV without the ARC function is connected via HDMI connections,
video signals of the playback device connected to this unit are
transmitted to the TV, but this unit can not play back the audio from the
TV. If you want to enjoy surround audio for TV program, a separate
audio cable connection is required.
In contrast, if a TV with the ARC function is connected via HDMI
connections, no audio cable connection is required. Audio signals from
the TV can be input to this unit through the HDMI cable between this
unit and the TV. This function allows you to enjoy surround playback
on this unit for the TV.
114
Remote
Index
Contents
Connections
Playback
Settings
o Supported audio formats
2-channel Linear PCM
2-channel, 32 kHz – 192 kHz, 16/20/24 bit
7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit
In order to play back digital video and audio such as BD video or DVD
video via HDMI connection, both this unit and the TV or player must to
support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System). HDCP is copyright
protection technology comprised of data encryption and authentication of
the connected AV devices. This unit supports HDCP.
0 If a device that does not support HDCP is connected, video and audio
are not output correctly. Read the owner’s manual of your television or
player for more information.
Dolby Digital / DTS / Dolby TrueHD /
Dolby Digital Plus / DTS-HD Master Audio /
DTS-HD High Resolution Audio / DTS Express
o Supported video signals
0 480i
0 480p
0 576i
0 576p
0 720p 60/50Hz
0 1080i 60/50Hz
0 1080p 60/50/24Hz
0 4K 60/50/30/25/24 Hz
Front panel
Display
Appendix
Copyright protection system
Multi-channel Linear
PCM
Bitstream
Tips
Rear panel
0 When connecting this unit to a device that is compatible with the Deep Color, 4K
and ARC functions, use a “High Speed HDMI cable with Ethernet” that bears the
HDMI logo.
115
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back a USB memory devices
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0 This unit is compatible with WMA META tags.
0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3) or 349 × 349 (MPEG-4 AAC), then music may not be played back
properly.
o Compatible formats
WMA
MP3
WAV
MPEG-4 AAC z
FLAC
Sampling frequency
32/44.1/48 kHz
32/44.1/48 kHz
32/44.1/48 kHz
32/44.1/48 kHz
32/44.1/48/88.2/96 kHz
Channel
2ch
2ch
2ch
2ch
2ch
Bit rate
48 – 192 kbps
32 – 320 kbps
–
48 – 320 kbps
–
Extension
.wma
.mp3
.wav
.aac/.m4a
.flac
z Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright
protected, depending on the computer’s settings.
Front panel
Display
Rear panel
116
Remote
Index
Contents
Connections
Playback
Settings
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Memory capacity
USB memory device
16 levels
Number of folders
99
filesz2
999
Number of
This unit supports the following Bluetooth profile.
0 A2DP (Advanced Audio Distribution Profile):
When a Bluetooth device that supports this standard is connected,
monaural and stereo sound data can be streamed at a high quality.
0 AVRCP (Audio/Video Remote Control Profile):
When a Bluetooth device that supports this standard is connected, the
Bluetooth device can be operated from this unit.
FAT16 : 2 GB, FAT32 : 2 TB
Number of folder directory levels z1
o About Bluetooth communications
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front panel
Display
Rear panel
Appendix
Playing back a Bluetooth device
o Maximum number of playable files and folder
Item
Tips
Radio waves broadcast from this unit may interfere with the operation
of medical devices. Make sure you turn off the power of this unit and
Bluetooth device in the following locations as radio wave interference
may cause malfunctions.
0 Hospitals, trains, aircraft, petrol kiosks and places where flammable
gases are generated
0 Near automatic doors and fire alarms
117
Remote
Index
Contents
Connections
Playback
Settings
Tips
Personal memory plus function
The most recently used settings (input mode, HDMI output mode, sound
mode, tone control, channel level, Restorer and audio delay, etc.) are
saved for each input source.
0 “Surr.Parameter” and “Tone” settings are stored for each sound mode.
Last function memory
This function stores the settings which were made before going into the
standby mode.
Front panel
Display
Rear panel
118
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Sound modes and channel output
.
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p. 88)
Channel output
Sound mode
Front L/R
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Direct (2-channel)
Direct (Multi-channel)
Stereo
Multi Ch In
Dolby Pro Logic g
DTS Neo:6
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS Surround
DTS 96/24
DTS-HD
DTS Express
Multi Ch Stereo
Virtual
Center
Surround L/R
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Subwoofer
Dz
D
D
D
D
D
D
D
D
D
D
D
D
D
D
z Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 91)
Front panel
Display
Rear panel
119
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
.
Sound modes and surround parameters
Surr.Parameter
Sound mode
Direct (2-channel)
Direct (Multi-channel)
Stereo
Multi Ch In
Dolby Pro Logic g
DTS Neo:6
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS Surround
DTS 96/24
DTS-HD
DTS Express
Multi Ch Stereo
Virtual
z1
z2
z3
z4
Mode
Dynamic
Comp.
z1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Low
Frequency
z2
Subwoofer
Neo:6 Music
mode only
Pro Logic g Music mode only
Panorama
Dimension
Center Width
Display
Restorer
z3
Center Image
Sz4
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Rear panel
S
S
S
S
S
S
S
S
S
S
S
S
S
S
This item can be selected when Dolby Digital or DTS signal is played.
This item can be selected when Dolby Digital or DTS signal or DVD-Audio is played.
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 91)
Front panel
Tone
120
Remote
Index
S
S
Contents
Connections
Playback
Settings
Tips
Appendix
Types of input signals, and corresponding sound modes
.
F This indicates the default sound mode.
S This indicates the selectable sound mode.
Type and format of input signals
PCM
Sound mode
DTS Surround
DTS-HD MSTR
DTS-HD HI RES
DTS Surround
DTS 96/24
DTS Express
DTS Neo:6 Cinema
DTS Neo:6 Music
Dolby Surround
Dolby TrueHD
Dolby Digital+
Dolby Digital
Dolby Pro Logic g Cinema
Dolby Pro Logic g Music
Dolby Pro Logic g Game
Dolby Pro Logic
Multi Ch In
Multi Ch In
Direct
Direct
Original sound mode
Multi Ch Stereo
Virtual
Stereo
Stereo
Front panel
ANALOG
PCM
(Multichannel)
DTS-HD
PCM
(2channel)
DTS-HD
Master
Audio
DTS
DTS-HD
High
Resolution
Audio
DTS
Express
DTS
(5.1channel)
Dolby
DTS 96/24
Dolby
TrueHD
Dolby Digital
Dolby
Digital Plus
Dolby
Digital
(5.1channel)
Dolby
Digital
(2channel)
F
F
F
F
S
S
S
S
S
F
S
S
S
F
F
F
S
S
S
S
S
S
S
S
S
S
S
S
F
S
S
S
S
S
S
S
S
S
F
S
F
Display
S
S
Rear panel
S
S
121
S
S
Remote
S
S
S
S
S
S
S
S
S
S
Index
S
S
S
S
S
S
S
S
S
S
Contents
Connections
Playback
Settings
Tips
Appendix
Explanation of terms
o Dolby
Dolby Pro Logic g
Dolby Pro Logic g is a matrix decoding technology developed by Dolby
Laboratories.
Regular music such as that on CDs is encoded into 5-channels to achieve
an excellent surround effect.
The surround channel signals are converted into stereo and full band
signals (with a frequency response of 20 Hz to 20 kHz or greater) to create
a “three-dimensional” sound image offering a rich sense of presence for all
stereo sources.
Dolby Digital
Dolby Digital is a multi-channel digital signal format developed by Dolby
Laboratories.
A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2
surround channels (“SL” and “SR”) and the “LFE” channel for low
frequency effects.
Because of this, there is no crosstalk between channels and a realistic
sound field with a “three-dimensional” feeling (sense of distance,
movement and positioning) is achieved. This delivers a thrilling surround
sound experience in the home.
Dolby TrueHD
Dolby TrueHD is a high definition audio technology developed by Dolby
Laboratories, using lossless coding technology to faithfully reproduce the
sound of the studio master.
This format provides the facility to support up to 8 audio channels with a
sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels
with a sampling frequency of 192 kHz/24 bit resolution.
Dolby Digital Plus
Dolby Digital Plus is an improved Dolby Digital signal format that is
compatible with up to 7.1-channels of discrete digital sound and also
improves sound quality thanks to extra data bit rate performance. It is
upwardly compatible with conventional Dolby Digital, so it offers greater
flexibility in response to the source signal and the conditions of the
playback device.
Front panel
Display
Rear panel
122
Remote
Index
Contents
Connections
Playback
Settings
o DTS
Tips
Appendix
DTS-HD High Resolution Audio
This is an abbreviation of Digital Theater System, which is a digital audio
system developed by DTS. DTS delivers a powerful and dynamic
surround sound experience, and is found in the world’s finest movie
theaters and screening rooms.
DTS-HD High Resolution Audio is an improved version of the conventional
DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling
frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital
sound. High data bit rate performance provides high quality sound. This
format is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS 96/24
DTS-HD Master Audio
DTS
DTS 96/24 is a digital audio format enabling high sound quality playback in
5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization
on DVD-Video.
DTS-HD Master Audio is a lossless audio format created by Digital
Theater System (DTS). This format provides the facility to support up to 8
audio channels with a sampling frequency of 96 kHz/24 bit resolution and
up to 6 audio channels with a sampling frequency of 192 kHz/24 bit
resolution. It is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS Digital Surround
DTS™ Digital Surround is the standard digital surround format of DTS,
Inc., compatible with a sampling frequency of 44.1 or 48 kHz and up to
5.1-channels of digital discrete surround sound.
DTS Neo:6™ Surround
DTS Neo:6™ is a matrix decoding technology for achieving 6.1-channel
surround playback with 2-channel sources. It includes “DTS Neo:6
Cinema” suite for playing movies and “DTS Neo:6 Music” suited for
playing music.
DTS-HD
This audio technology provides higher sound quality and enhanced
functionality than the conventional DTS and is adopted as an optional
audio for Blu-ray Disc.
This technology supports multi-channel, high data transfer speed, high
sampling frequency, and lossless audio playback. Maximum 7.1-channels
are supported in Blu-ray Disc.
Front panel
Display
Rear panel
123
Remote
Index
Contents
Connections
Playback
Settings
o Audio
Tips
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
FLAC (Free Lossless Audio Codec)
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
LFE
This is an abbreviation of Low Frequency Effect, which is an output
channel that emphasizes low frequency effect sound. Surround audio is
intensified by outputting 20 Hz to 120 Hz deep bass to the system
subwoofer(s).
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
Front panel
Display
Rear panel
124
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
Speaker impedance
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
This is an AC resistance value, indicated in Ω (ohms).
Greater power can be obtained when this value is smaller.
Dialogue normalization function
This function operates automatically during playback of Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player.
To encode WMA files, only use applications authorized by Microsoft
Corporation. If you use an unauthorized application, the file may not work
properly.
Dynamic range
The difference between the maximum undistorted sound level and the
minimum discernible level above the noise emitted by the device.
Downmix
Sampling frequency
This function converts the number of channels of surround audio to a
lower number of channels and plays back according to the system’s
configuration.
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
Front panel
Display
Rear panel
125
Remote
Index
Contents
Connections
Playback
Settings
o Others
Tips
Appendix
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to this unit using Bluetooth. When paired, the devices
authenticate each other and can connect without mistaken connections
occurring.
When using Bluetooth connection for the first time, you need to pair this
unit and the Bluetooth device to be connected.
HDCP
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content from being
copied without authorization.
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason.
Front panel
Display
Rear panel
126
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Trademark information
.
.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc.
is under license. Other trademarks and trade names are those of their
respective owners.
Front panel
Display
Rear panel
.
“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad, may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad
Air and iPad mini are trademarks of Apple Inc.
Bluetooth technology works with iPhone 6 Plus, iPhone 6, iPhone 5s,
iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air, iPad (3rd and 4th
generation), iPad 2, iPad mini with Retina display, iPad mini, and iPod
touch (5th generation).
0 Individual users are permitted to use iPad, iPhone, and iPod touch for
private copy and playback of non-copyrighted contents and contents
whose copy and playback is permitted by law. Copyright infringement
is prohibited by law.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
127
Remote
Index
Connections
Playback
Settings
Tips
.
Contents
.
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the
Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All
Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Front panel
Display
Rear panel
128
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Specifications
o Audio section
0 Power amplifier
Rated output:
Front:
70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
6 – 16 Ω/ohms
0 Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N:
98 dB (IHF–A weighted, Direct mode)
Front panel
Display
Rear panel
129
Remote
Index
Appendix
Contents
Connections
o Tuner section
Playback
Settings
[FM]
Tips
Appendix
[AM]
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
Reception frequency range:
87.5 MHz – 107.9 MHz
520 kHz – 1710 kHz
Effective sensitivity:
1.2 μV (12.8 dBf)
18 μV
50 dB sensitivity:
MONO ― 2.8 μV (20.2 dBf)
S/N ratio:
MONO ― 70 dB (IHF–A weighted, Direct mode)
STEREO ― 67 dB (IHF–A weighted, Direct mode)
Distortion:
MONO ― 0.7 % (1 kHz)
STEREO ― 1.0 % (1 kHz)
o Bluetooth section
Communications system:
Bluetooth Version 2.1 + EDR (Enhanced Data Rate)
Transmission power:
Maximum 2.5 mW (Class 2)
Maximum communication range:
Approx. 32.8 ft/10 m in line of sightz
Frequency band:
2.4 GHz band
Modulation scheme:
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.5
Corresponding codec:
SBC, AAC
Transmission range (A2DP):
20 Hz - 20,000 Hz
zThe actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
Front panel
Display
Rear panel
130
Remote
Index
Contents
Connections
Playback
Settings
Tips
o General
Power supply:
AC 120 V, 60 Hz
Power consumption:
310 W
Power consumption in standby mode:
0.1 W
Power consumption in CEC standby
mode:
2.8 W
Power consumption when Bluetooth
standby is used:
1W
For purposes of improvement, specifications and design are subject to change without notice.
Front panel
Display
Rear panel
131
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
1 7/8
(47)
7 7/8 (197)
1 3/4
(44)
12 5/8 (319)
3/4
(19)
11 3/8 (288)
1/2
(12)
o Dimensions (Unit : in. (mm))
2 3/8
(60)
.1 7/8 (45)
o Weight : 16 lbs 9 oz (7.5 kg)
Front panel
Display
13 5/8 (344)
Rear panel
6 (151)
5/8
(15)
5 3/8 (136)
17 1/8 (434)
1 7/8 (45)
132
Remote
Index
Contents
Connections
Index
Playback
Settings
vD
v Numerics
3D ................................................................ 113
4K ................................................................ 113
5.1-channel .............................................. 21, 24
vA
Audio settings ........................................... 67, 71
Auto Standby ................................................. 93
vH
HDCP ........................................................... 115
Display ........................................................... 13
HDMI Control ........................................... 61, 78
Dolby sound mode ................................. 58, 122
DTS sound mode ................................... 58, 123
DVD player ............................................... 31, 39
Bluetooth device ............................................ 43
Blu-ray Disc player ................................... 31, 39
ECO Mode ..................................................... 92
vF
vG
Display
Input settings ............................................ 68, 81
Input source ................................................... 38
JPEG .............................................................. 40
vL
Listening position ........................................... 83
Game console ................................................ 32
Cable TV ........................................................ 30
Front panel
Input Assign ................................................... 81
vJ
FM/AM antenna ........................................ 34, 48
General settings ....................................... 69, 92
vC
vI
Input signal ................................................... 121
Front panel ..................................................... 10
vB
Appendix
Direct sound mode ......................................... 59
vE
Audio formats ....................................... 115, 116
Tips
vM
Menu map ...................................................... 67
Muting ............................................................ 39
Rear panel
133
Remote
Index
Contents
Connections
vO
Playback
Settings
Tips
vS
Original sound mode ...................................... 59
Satellite tuner ................................................. 30
Set-top box ..................................................... 30
vP
Pairing ...................................................... 43, 45
PCM multi-channel sound mode .................... 58
Protection circuit .......................................... 126
Setup Assistant .............................................. 69
Sleep timer ..................................................... 63
Sound mode ................................... 57, 119, 120
Speaker connection ....................................... 20
Speaker settings ...................................... 68, 83
vR
Random playback .......................................... 53
Rear panel ...................................................... 14
Remote control unit ........................................ 16
Repeat playback ............................................ 53
Resetting factory settings ............................. 112
Restorer ......................................................... 74
Stereo sound mode ........................................ 59
vT
Tips ................................................................ 99
Tone Control .................................................. 54
Troubleshooting ........................................... 100
TV ....................................................... 26, 27, 28
vU
USB memory device ................................ 33, 40
vV
Video camcorder ............................................ 32
Video Select ................................................... 56
Video settings ........................................... 67, 77
Volume ..................................................... 39, 62
Front panel
Display
Rear panel
134
Remote
Index
Appendix
.
www.denon.com
135
3520 10495 00AD
Copyright © 2017 D&M Holdings Inc. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising