Soft serve freezer
161
161
Soft serve freezer
Compact twin twist, Taylormate®
Features
Offer all of the popular soft serve variations from low or non-fat ice
creams to custards, frozen yogurts and sorbet. Serve two separate
soft serve flavours, or an equal combination of both in a twist.
Freezing cylinder
Two, 1.4 litre
Hourly production* (approximately)
26.6 litres per hour - combined
Mix hopper
Two, 7.6 litre. Separate hopper refrigeration to maintains the mix
below 5°C during Auto and Standby modes.
Indicator lights
‘Mix Low’ light alerts the operator to add mix. Audible alarm may be
enabled to sound when mix is low.
Electronic controls
Finished product quality is monitored by Softech™ controls that
measure viscosity.
Standby
During long no-use periods, the standby feature maintains safe
product temperatures in the mix hopper and freezing cylinder.
Air filter
Easily removable, cleanable air filter helps keep condenser clean for
optimal refrigeration system performance.
Door interlock system
Protects the operator from injury as the beater will not operate
without the dispensing door in place.
Taylor 161 shown with optional cart.
*Hourly output figures are based on machines operating in the optimum working environment and
may vary depending on your operational circumstances.
Continuing research results in steady improvements; therefore, these specifications are subject to change without notice.
Taylor Company UK
106 Claydon Business Park, Ipswich, Suffolk, IP6 0NL
Tel: +44 (0) 1473 350000
Fax: +44 (0) 1473 350001
www.taylor-company.co.uk
May 2014
161 Soft serve freezer
(161 shown with optional cart)
Figures in brackets indicate millimetres
Height
Width
Depth
Counter clearance*
DIMENSIONS
27.88”
21”
26.63”
-
708 mm
533 mm
676 mm
-
*Designed to rest on a plastic pad directly on counter top or cart.
Weight
305 lbs.
Wall air clearance (minimum)*
Back
Sides
6”
Technical specification
Beater motor
Two
Refrigeration (freezer)
3,500 BTU/hr
Refrigeration (hopper)
400 BTU/hr
139 Kg
152 mm
0.5 HP
R404A
R134a
The Taylor 161 is available AIR or WATER cooled.
*Minimum air clearances MUST be met to assure adequate airflow for optimum
performance of air cooled machines. Place the back of the unit against a wall to
prevent recirculation of warm air.
Optional extras
 Cone dispenser
 Legs - increase height of unit by 4.25”/108mm
 Cart with casters
ELECTRICAL SPECIFICATION - SINGLE PHASE
Taylor 161
Voltage
230 VAC
Frequency
50 Hz
Circuit breaker
x2
13 amp fuse x2
2 x 13 amp dedicated sockets
Plug/Socket
ELECTRICAL SPECIFICATION - SINGLE PHASE
Taylor 161
Voltage
230 VAC
Frequency
50 Hz
Circuit breaker
20 amp
Plug/Socket
IEC 309, 32 amp 3 -pin socket
WATER CONNECTIONS*
Cold water supply
Fitting (on machine)
3/4” (22mm) Ø
Supply temperature
13 - 20 ºC (55 - 68 ºF)
Supply pressure
1 - 3 Bar ( 14.5 - 43.5 PSI)
Waste pipe
Fitting (on machine)
3/4” (22mm) Ø
*Water connections are only required for water cooled machines.
Continuing research results in steady improvements; therefore, these specifications are subject to change without notice.
Taylor Company UK
106 Claydon Business Park, Ipswich, Suffolk, IP6 0NL
Tel: +44 (0) 1473 350000
Fax: +44 (0) 1473 350001
www.taylor-company.co.uk
May 2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising