Speed Triple 1050 from VIN 461332, Speed Triple R 1050, Street

Speed Triple 1050 from VIN 461332, Speed Triple R 1050, Street
English
Fitting Instructions:
Speed Triple 1050 from VIN 461332, Speed Triple R 1050,
Street Triple from VIN 480782 and Street Triple R from VIN 482182
A9708186, A9708262 and A9708269
Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven
engineering, exhaustive testing, and continuous striving for superior reliability, safety and performance.
Completely read all of these instructions before commencing the installation of the accessory kit in order to become
thoroughly familiar with the kit’s features and the installation process.
These instructions should be considered a permanent part of your accessory kit, and should remain with it even if your
accessory-equipped motorcycle is subsequently sold.
3
2
1
4
5
Parts Supplied:
1.
Flyscreen
1 off
4.
Screw, M5 x 14 mm
4 off
2.
Infill panel
1 off
5.
Cable tie
1 off
3.
Screw, M6 x 12 mm
3 off
Publication part number A9900509 issue 9, DC 71618
© Triumph Designs Ltd. 2015
1 of 5
Warning
Accessory Kit
This accessory kit is designed for use on Triumph
motorcycles listed in the accessory kit table on this page
and should not be fitted to any other manufacturer’s
motorcycle. Fitting this accessory kit to any other
manufacturer’s motorcycle will affect the performance,
stability and handling of the motorcycle. This may affect
the rider’s ability to control the motorcycle and could
cause an accident.
Model
VIN
Speed Triple
1050
From
VIN 461332
Street Triple
From
VIN 480782
to
VIN 560476
Street Triple R
From
VIN 482182
to
VIN 560476
Speed Triple
1050
From
VIN 461332
Speed Triple R
1050
All
Street Triple
From
VIN 480782
to
VIN 560476
Street Triple R
From
VIN 482182
to
VIN 560476
Street Triple
From
VIN 560477
Street Triple R
From
VIN 560477
A9708186
Warning
Always have Triumph approved parts, accessories and
conversions fitted by a trained technician of an
authorised Triumph dealer. The fitment of parts,
accessories and conversions by a technician who is not
of an authorised Triumph dealer may affect the
handling, stability or other aspects of the motorcycle’s
operation, which may result in loss of motorcycle control
and an accident.
A9708262
Warning
Throughout this operation, ensure that the motorcycle is
stabilised and adequately supported to prevent risk of
injury from the motorcycle falling.
A9708269
Warning
A torque wrench of known accurate calibration must be
used when fitting this accessory kit. Failure to tighten
any of the fasteners to the correct torque specification
may result in loss of motorcycle control and an accident.
1.
Position the motorcycle on a paddock stand.
Speed Triple from VIN 461332 and
Speed Triple R only
2.
Release the three fixings and remove the front panel
from the fuel tank.
1
2
2
cgfo
1. Front panel
2. Fixings
2 of 5
2
Street Triple and Street Triple R only
3.
8.
Position the infill panel to the instruments bracket as
shown. Secure with the M6 x 12 mm screws from
the kit and tighten to 7 Nm.
Remove the seat.
All Models
4.
1
Disconnect the battery, negative (black) lead first.
Note:
•
The instruments cover is held in place by
bayonet type fixings. Gently pull on the cover
to release it.
5.
Remove the cover and gasket attached to the rear of
the instruments. Retain the cover and gasket if the
motorcycle is to be returned to its original condition.
cgpb
1. Screws
2
Note:
•
Ensure that the rubber boot on the electrical
connector is positioned over the instrument
socket and seals the connector.
9.
Fit the instruments to the infill panel and bracket
assembly. Tighten the screw to 3 Nm and connect
the electrical connector.
1
3
ccwj_1
4
1. Instruments cover
2. Bayonet fixings
3. Gasket
6.
Disconnect the
instrument pack.
electrical
connector
from
the
7.
Release the screw and remove the instruments from
the bracket.
4
1
3
2
cgpa
1.
2.
3.
4.
Electrical connector
Screw
Washer
Bayonet fixings
1
cgpe
1.
2.
3.
4.
3
Electrical connector
Screw
Washer
Bayonet fixings
2
Warning
When securing electrical cables with cable ties, ensure
the cable ties are fully tight. Ensure there is slack in the
cables.
Failure to follow this warning may result in damage to
the electrical cables, which may lead to loss of
motorcycle control and an accident.
3 of 5
10. Secure the headlight harness to the instrument
harness with the cable tie provided.
Speed Triple from VIN 461332 and
Speed Triple R only
13. Refit the front panel to the fuel tank and tighten the
fixings to 3 Nm.
Street Triple and Street Triple R only
14. Refit the seat.
All Models
Warning
2
1
3
cgpa
Operation of the motorcycle with restricted steering may
result in loss of motorcycle control and an accident.
1. Headlight harness
2. Instrument harness
3. Cable tie
11.
Move the handlebar to the left and right full lock while
checking that the mirrors do not restrict the steering by
contacting the flyscreen.
Caution
Secure the flyscreen to the infill panel with the
M5 x 14 mm screws from the kit. Tighten to 3 Nm.
1
3
2
Move the handlebar to the left and right full lock while
checking that the mirrors do not contact the flyscreen
when moving the handlebar.
Damage to the flyscreen will result if the mirrors contact
the flyscreen. If the mirrors do make contact, adjust their
position.
15. If the mirrors contact the flyscreen when on full lock,
adjust the mirrors such that they will not contact it
and that they give rear visibility in the riding position.
16. Remove the motorcycle from the paddock stand.
Warning
1
cgpc
1. Screws
2. Infill panel
3. Flyscreen
12. Reconnect the battery, positive (red) lead first.
After fitting the accessory kit the motorcycle will exhibit
new handling characteristics. Operate the motorcycle in
a safe area free from traffic to gain familiarity with any
new characteristics. Operation of the motorcycle when
not familiar with any new handling characteristics may
result in loss of motorcycle control and an accident.
Warning
If, after fitment of this accessory kit, you have any doubt
about the performance of any aspect of the motorcycle,
contact an authorised Triumph dealer and do not ride
the motorcycle until the authorised dealer has declared
it fit for use. Riding a motorcycle when there is any
doubt as to any aspect of the performance of the
motorcycle may result in loss of control of the
motorcycle, leading to an accident.
4 of 5
Warning
Never ride an accessory-equipped motorcycle at speeds
above 80 mph (130 km/h). The presence of accessories
will cause changes in the stability and handling of the
motorcycle. Failure to allow for changes in motorcycle
stability may lead to loss of control or an accident.
Remember that the 80 mph (130 km/h) limit will be
reduced by the fitting of non-approved accessories,
incorrect loading, worn tyres, overall motorcycle
condition and poor road or weather conditions.
Warning
Only operate this Triumph motorcycle at high speed in
closed course on road competition or on closed course
race tracks. High speed operation should only be
attempted by riders who have been instructed in the
techniques necessary for high speed riding and are
familiar with the motorcycle’s characteristics in all
conditions. High speed operation in any other
circumstances is dangerous and will lead to loss of
motorcycle control and an accident.
Warning
The motorcycle must not be operated above the legal
road speed limit except in closed course conditions.
5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising