Roland Eco-Sol MAX ESL3-WH White Ink

Roland Eco-Sol MAX ESL3-WH White Ink
Converting Eco-Sol MAX White Ink to
Eco-Sol MAX 2 White Ink Instructions
MAX to MAX 2 White Ink Conversion
Overview
Eco-Sol MAX White Ink (ESL3-WH) is no longer being manufactured. As a result, some Roland
printer owners will need to change their ink setup.
BN-20, XC-540W/MT, and VS series owners who have their printers configured for Eco-Sol MAX
White Ink (ESL3-WH) will need to convert their machines for use with Eco-Sol MAX 2 White Ink
(ESL4-WH).
 Dealer involvement is not required to make the switch.
 Change affects the following printers configured with Eco-Sol MAX White Ink:
o BN-20
o XC-540W/MT
o VS-300/420/540/640
 Not all inks needs to be converted to ESL4 (MAX 2) for this conversion.
 CMYKLcLm and Metallic will remain Eco-Sol MAX (ESL3) inks.
 The ink type setting of the printer will remain ECO-SOL MAX (ESL3) ink even after Eco-Sol
MAX 2 white ink is installed.
 Users will continue to use profiles for Eco-Sol MAX ink, not Eco-Sol MAX 2 ink.
 Please contact your Roland Authorized Dealer to answer any further questions.
Roland DGA Corporation | 15363 Barranca Parkway | Irvine, CA. 92618-2216 | 800.542.2307 | 949.727.2100 | www.rolanddga.com
Certified ISO 9001:2008
Instructions
White Ink Conversion
Instructions
1. Perform a nozzle test print.
2. Perform user maintenance. Check condition of wiper and felt. Replace if needed.
3. Check drain bottle, or waste ink tank capacity (for BN-20).
4. Check ink levels.
5. Update the firmware.
o BN-20 install firmware version 2.50
o VS series install firmware version 4.70 and above (VS-640, VS-540, VS-420 and VS-300)
o XC-540W/MT install firmware version 4.60
o Do NOT change the ink type.
Note: Please visit Roland’s support site at http://www.rolanddga.com/support and
download the latest version of the firmware. After downloading the file, please follow
instructions attached in the zip file to install the firmware.
6. Remove Eco-Sol MAX White Ink (ESL3-WH) cartridge from the slot.
7. Insert Eco-Sol MAX 2 White Ink (ESL4-WH).
Note: The ink type setting of the printer will remain ECO-SOL MAX (ESL3) ink even after
Eco-Sol MAX 2 (ESL4-WH) ink is installed. As a result, users will continue to use profiles for
Eco-Sol MAX ink, not Eco-Sol MAX 2 ink.
8. Please follow the next step for your device:
o VS Series: Perform ‘INK RENEWAL’ to remove of all the ESL3-WH ink from the ink line. User’s
Manual, page 81 for the VS series.
o
BN-20: Perform two ‘Powerful Cleanings’ to remove all of the ESL3-WH ink from the ink line.
Master guide, page 74 for the BN-20.
o
XC-540W/MT: Perform ‘Powerful Cleaning’ to remove all of the ESL3-WH ink from the ink
line. User’s Manual, page 72for the XC series.
9. Repeat nozzle test print.
10. Update of RVW, utility, and driver is not necessary.
Roland DGA Corporation | 15363 Barranca Parkway | Irvine, CA. 92618-2216 | 800.542.2307 | 949.727.2100 | www.rolanddga.com
Certified ISO 9001:2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising