ZXHN F600 User Manual GPON ONT

ZXHN F600 User Manual GPON ONT
ZXHN F600
GPON ONT
User Manual
ZXHN F600
GPON ONT
User Manual
Manual No: SJ-20140718083139-001
Edition Time: 2014-07-21 (R1.0)
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or
any portion of this document, in any form by any means, without the prior
written consent of ZTE CORPORATION is prohibited. Additionally, the
contents of this document are protected by contractual
obligations.
All company, brand and product names are trade or service marks, or
registered trade or service marks, of ZTE CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory
warranties, representations or conditions are disclaimed, including without
for a particular
limitation any implied warranty of merchantability,
purpose, title or non-infringement. ZTE CORPORATION and its licensors
shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this
document. Except as expressly provided in any written license between
ZTE CORPORATION and its licensee, the user of this document shall not
acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical
change to this product without further notice.
Users may visit ZTE technical support website http://support.zte.com.cn
to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
1
Safety Precautions
Usage Cautions
� Read all the safety cautions carefully before using the device.
� Only use the accessories included in the package, such as power supply
adapter.
� Do not extend the power cord, otherwise the device will not work.
� The power supply voltage must meet the requirements of the device input
voltage (The voltage fluctuation range is less than 10%).
� Keep the power plug clean and dry to prevent any risk of electric shock or
other dangers.
� Disconnect all the cables during a lightning storm to prevent the device from
damage.
� Power off and unplug the power plug when the device is not in use for a long
time.
� Do not attempt to open the covers of the device. It is dangerous to do so
when the device is powered ON.
� Do not directly stare at the optical interface to prevent any eye injuries.
� Power off and stop using the device under the conditions such as, abnormal
sound, smoke, and strange smell. Contact the service provider for maintenance if the device is faulty.
Note:
The users should read the usage cautions above carefully and will be responsible for any incident resulting from the violation of the above cautions.
Environment Requirements
� Ensure proper ventilation to the device. Place the device away from direct
sunlight and never spill any liquid on the device.
� Do not place any object on the device to prevent any deformation or damage
to the device.
� Do not place the device near any source of heat or water.
� Keep the device away from any household appliances with strong magnetic
or electric fields, such as microwave oven and refrigerator.
Cleaning Requirements
� Before cleaning, power off the device, and unplug all the cables connected
to the device, such as power cable, optical fiber, and Ethernet cable.
� Do not use any liquid or spray to clean the device. Use a soft dry cloth.
Environment Protection
� Do not dispose the device or battery improperly.
� Observe the local regulations about the equipment disposal or treatment.
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, a separation distance of 20 cm between the device and the human should be maintained.
2
Package Content
Please make sure the ZXHN F600 package contains the following items.
Item
Name
Quantity
ZXHN F600 unit
One
AC-DC power supply
adapter
One
RJ-45 Ethernet cable
One
Note:
A socket outlet that is installed near equipment and that shall be easily accessible.
One ZXHN F600 GPON ONT User Manual is delivered with the product.
If any of the items included in the package is incorrect, lost or damaged, please
contact your service provider. If you need to replace the product, please keep
the package and all the items in good condition.
3
Indicator
Figure 3-1 shows the indicators on the front panel of the ZXHN F600 unit.
Figure 3-1 Indicators of the ZXHN F600 Unit
Table 3-1 describes the indicators on the front panel of the ZXHN F600 unit.
Table 3-1 Indicators on the Front Panel
Indicator
Status
Description
Off
No power
Power
PON
Solid green
Power on
Off
The ONT registration fails or the system is
not powered on.
Solid green
The ONT registration is successful.
Flashing green
The ONT is being registered.
Off
LOS
Solid red
Flashing red
The ONT received optical power is normal.
The optical transmitter of the PON interface
is powered off.
The ONT received optical power is lower
than the optical sensitivity of the receiver.
Indicator
Status
Off
Internet
Solid red
Flashing red
Off
LAN1 – LAN4
Solid green
Flashing green
4
Description
The device is not powered on or the ethernet
connection does not exit.
The internet connection has been
established.
The data is transmitted via internet
connection.
The device is not powered on or the network
link is not established.
The network link has been established but
no data is being transmitted or received.
Data is being transmitted or received.
Interface
Figure 4-1 shows the interfaces and buttons of the ZXHN F600 unit.
Figure 4-1 Interfaces and Buttons
Table 4-1 describes the interfaces and buttons on the back panel of the ZXHN
F600 unit.
Table 4-1 Descriptions of the Interfaces and Buttons on the Back Panel
Interface/Button
Description
ON/OFF
Power switch.
Power
12 V DC power connector.
Reset
Reset button, when the power is on, use a needle to press
the button for over 5 seconds to restore the default settings.
LAN1 – LAN4
RJ-45 Ethernet interface.
PON
PON interface.
5
Product Features
Interfaces
� GPON
interface:
GPON standard, SC/APC, comply with ITU
G.984.1–G.984.5 standards
� Ethernet interface: Four GE interfaces, RJ-45, comply with IEEE 802.3 and
IEEE 802.3u standards
Technical Features
� Broadband service access: Connected to Internet through the GPON access
method.
� Ethernet service access: Provides GE Ethernet interfaces, connected to the
Ethernet devices, such as the user PC. Provides the Internet access and
IPTV services.
� Security: Provides multi-level authentication based on the device, user and
service, and provides the data channel encryption for safety.
� QoS: Provides QoS services meeting the requirements of various services
for the local devices and network
� Network management: Provides multi-mode network management.
6
Technical Specification
Item
Specification
Dimension
180mm × 125mm × 36mm (Width × Depth ×
Height)
Rated current
1A
Rated voltage
12 V DC
Operation temperature
℃ to 40℃
℃
0℃
Operation humidity
5% – 95%
7
Cable Connection
Figure 7-1 shows the devices that are connected to the ZXHN F600 device.
Figure 7-1 Entire Connection
After the devices are connected to the ZXHN F600 device, press the power
button. When the corresponding indicators on the front panel are ON, you can
enjoy various services provided by the service provider.
8
Troubleshooting
The Power indicator on the front panel is off after the power button is pressed.
The power adapter is not correctly connected to the device. Be sure to use the
power adapter supplied with the device.
The LOS indicator is flashing red or solid red after the device is powered on.
� The optical fiber is not correctly connected to the ONT PON interface.
� The optical fiber is broken or damaged.
� If the indicator is solid red or keeps flashing, please contact the service
provider for maintenance.
The PON indicator on the front panel is off or flashing green after the device is
powered on.
� The GPON link is not established.
� The ONT is not registered.
� Please contact the service provider for help.
The green LAN indicator on the front panel is off after the device is powered on.
� The corresponding LAN link is not established.
� The Ethernet cable is not correctly connected to the LAN interface.
� The network device connected to the LAN interface is not powered on.
ZXHN F600
GPON ONT
User Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising