Overview for the Avaya G430 Branch Gateway

Overview for the Avaya G430 Branch

Gateway

Release 6.3.5

Issue 1

May 2014

©

2014 Avaya Inc.

All Rights Reserved.

Notice

While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.

Warranty

Avaya provides a limited warranty on Avaya hardware and software.

Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product while under warranty is available to Avaya customers and other parties through the Avaya

Support website: http://support.avaya.com

or such successor site as designated by Avaya. Please note that if you acquired the product(s) from an authorized Avaya Channel Partner outside of the United States and Canada, the warranty is provided to you by said Avaya Channel

Partner and not by Avaya.

Third Party Components

“Third Party Components” mean certain software programs or portions thereof included in the Software or Hosted Service may contain software (including open source software) distributed under third party agreements (“Third Party Components”), which contain terms regarding the rights to use certain portions of the Software (“Third Party

Terms”). As required, information regarding distributed Linux OS source code (for those Products that have distributed Linux OS source code) and identifying the copyright holders of the Third Party

Components and the Third Party Terms that apply is available in the

Documentation or on Avaya’s website at: http://support.avaya.com/

Copyright or such successor site as designated by Avaya. You agree to the Third Party Terms for any such Third Party Components

Preventing Toll Fraud

“Toll Fraud” is the unauthorized use of your telecommunications system by an unauthorized party (for example, a person who is not a corporate employee, agent, subcontractor, or is not working on your company's behalf). Be aware that there can be a risk of Toll Fraud associated with your system and that, if Toll Fraud occurs, it can result in substantial additional charges for your telecommunications services.

Avaya Toll Fraud intervention

If you suspect that you are being victimized by Toll Fraud and you need technical assistance or support, call Technical Service Center Toll

Fraud Intervention Hotline at +1-800-643-2353 for the United States and Canada. For additional support telephone numbers, see the Avaya


or such successor site as designated by Avaya. Suspected security vulnerabilities with Avaya products should be reported to Avaya by sending mail to: [email protected].

Documentation disclaimer

“Documentation” means information published by Avaya in varying mediums which may include product information, operating instructions and performance specifications that Avaya may generally make available to users of its products and Hosted Services. Documentation does not include marketing materials. Avaya shall not be responsible for any modifications, additions, or deletions to the original published version of documentation unless such modifications, additions, or deletions were performed by Avaya. End User agrees to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation, to the extent made by End User.

Link disclaimer

Avaya is not responsible for the contents or reliability of any linked websites referenced within this site or documentation provided by

Avaya. Avaya is not responsible for the accuracy of any information, statement or content provided on these sites and does not necessarily endorse the products, services, or information described or offered within them. Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages.

Licenses

THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA

WEBSITE, HTTP://SUPPORT.AVAYA.COM/LICENSEINFO OR

SUCH SUCCESSOR SITE AS DESIGNATED BY AVAYA, ARE

APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR

INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,

ANY AVAYA AFFILIATE, OR AN AVAYA CHANNEL PARTNER (AS

APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH AVAYA

OR AN AVAYA CHANNEL PARTNER. UNLESS OTHERWISE

AGREED TO BY AVAYA IN WRITING, AVAYA DOES NOT EXTEND

THIS LICENSE IF THE SOFTWARE WAS OBTAINED FROM

ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN

AVAYA CHANNEL PARTNER; AVAYA RESERVES THE RIGHT TO

TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE USING

OR SELLING THE SOFTWARE WITHOUT A LICENSE. BY

INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR

AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF

YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,

DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER

REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),

AGREE TO THESE TERMS AND CONDITIONS AND CREATE A

BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE

APPLICABLE AVAYA AFFILIATE (“AVAYA”).

Avaya grants you a license within the scope of the license types described below, with the exception of Heritage Nortel Software, for which the scope of the license is detailed below. Where the order documentation does not expressly identify a license type, the applicable license will be a Designated System License. The applicable number of licenses and units of capacity for which the license is granted will be one (1), unless a different number of licenses or units of capacity is specified in the documentation or other materials available to you.

“Software” means Avaya’s computer programs in object code, provided by Avaya or an Avaya Channel Partner, whether as stand-alone products, pre-installed , or remotely accessed on hardware products, and any upgrades, updates, bug fixes, or modified versions thereto.

“Designated Processor” means a single stand-alone computing device.

“Server” means a Designated Processor that hosts a software application to be accessed by multiple users. “Instance” means a single copy of the Software executing at a particular time: (i) on one physical machine; or (ii) on one deployed software virtual machine (“VM”) or similar deployment.

License types

• Designated System(s) License (DS). End User may install and use each copy or an Instance of the Software only on a number of Designated Processors up to the number indicated in the order. Avaya may require the Designated Processor(s) to be identified in the order by type, serial number, feature key,

Instance, location or other specific designation, or to be provided by End User to Avaya through electronic means established by

Avaya specifically for this purpose.

• Concurrent User License (CU). End User may install and use the Software on multiple Designated Processors or one or more

Servers, so long as only the licensed number of Units are accessing and using the Software at any given time. A “Unit” means the unit on which Avaya, at its sole discretion, bases the pricing of its licenses and can be, without limitation, an agent, port or user, an e-mail or voice mail account in the name of a person or corporate function (e.g., webmaster or helpdesk), or a directory entry in the administrative database utilized by the

Software that permits one user to interface with the Software.

2 Overview for the Avaya G430 Branch Gateway

Comments? [email protected]

May 2014

Units may be linked to a specific, identified Server or an Instance of the Software.

• Database License (DL). End User may install and use each copy or an Instance of the Software on one Server or on multiple

Servers provided that each of the Servers on which the Software is installed communicates with no more than an Instance of the same database.

• CPU License (CP). End User may install and use each copy or

Instance of the Software on a number of Servers up to the number indicated in the order provided that the performance capacity of the Server(s) does not exceed the performance capacity specified for the Software. End User may not re-install or operate the Software on Server(s) with a larger performance capacity without Avaya’s prior consent and payment of an upgrade fee.

• Named User License (NU). You may: (i) install and use the

Software on a single Designated Processor or Server per authorized Named User (defined below); or (ii) install and use the Software on a Server so long as only authorized Named

Users access and use the Software. “Named User”, means a user or device that has been expressly authorized by Avaya to access and use the Software. At Avaya’s sole discretion, a

“Named User” may be, without limitation, designated by name, corporate function (e.g., webmaster or helpdesk), an e-mail or voice mail account in the name of a person or corporate function, or a directory entry in the administrative database utilized by the

Software that permits one user to interface with the Software.

• Shrinkwrap License (SR). You may install and use the Software in accordance with the terms and conditions of the applicable license agreements, such as “shrinkwrap” or “clickthrough” license accompanying or applicable to the Software

(“Shrinkwrap License”).

Heritage Nortel Software

“Heritage Nortel Software” means the software that was acquired by

Avaya as part of its purchase of the Nortel Enterprise Solutions

Business in December 2009. The Heritage Nortel Software currently available for license from Avaya is the software contained within the list of Heritage Nortel Products located at http://support.avaya.com/

LicenseInfo/ under the link “Heritage Nortel Products”, or such successor site as designated by Avaya. For Heritage Nortel Software,

Avaya grants Customer a license to use Heritage Nortel Software provided hereunder solely to the extent of the authorized activation or authorized usage level, solely for the purpose specified in the

Documentation, and solely as embedded in, for execution on, or (in the event the applicable Documentation permits installation on non-Avaya equipment) for communication with Avaya equipment. Charges for

Heritage Nortel Software may be based on extent of activation or use authorized as specified in an order or invoice.

Copyright

Except where expressly stated otherwise, no use should be made of materials on this site, the Documentation, Software, Hosted Service, or hardware provided by Avaya. All content on this site, the documentation, Hosted Service, and the Product provided by Avaya including the selection, arrangement and design of the content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property laws including the sui generis rights relating to the protection of databases. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way any content, in whole or in part, including any code and software unless expressly authorized by Avaya. Unauthorized reproduction, transmission, dissemination, storage, and or use without the express written consent of Avaya can be a criminal, as well as a civil offense under the applicable law.

Virtualization

Each product has its own ordering code and license types. Note that each Instance of a product must be separately licensed and ordered.

For example, if the end user customer or Avaya Channel Partner would like to install two Instances of the same type of products, then two products of that type must be ordered.

How to Get Help

For additional support telephone numbers, go to the Avaya support

Website: http://www.avaya.com/support . If you are:

• Within the United States, click the Escalation Contacts link that is located under the Support Tools heading. Then click the appropriate link for the type of support that you need.

• Outside the United States, click the Escalation Contacts link that is located under the Support Tools heading. Then click the

International Services link that includes telephone numbers for the international Centers of Excellence.

Providing Telecommunications Security

Telecommunications security (of voice, data, and/or video communications) is the prevention of any type of intrusion to (that is, either unauthorized or malicious access to or use of) your company's telecommunications equipment by some party.

Your company's “telecommunications equipment” includes both this

Avaya product and any other voice/data/video equipment that could be accessed via this Avaya product (that is, “networked equipment”).

An “outside party” is anyone who is not a corporate employee, agent, subcontractor, or is not working on your company's behalf. Whereas, a “malicious party” is anyone (including someone who may be otherwise authorized) who accesses your telecommunications equipment with either malicious or mischievous intent.

Such intrusions may be either to/through synchronous (timemultiplexed and/or circuit-based), or asynchronous (character-, message-, or packet-based) equipment, or interfaces for reasons of:

• Utilization (of capabilities special to the accessed equipment)

• Theft (such as, of intellectual property, financial assets, or toll facility access)

• Eavesdropping (privacy invasions to humans)

• Mischief (troubling, but apparently innocuous, tampering)

• Harm (such as harmful tampering, data loss or alteration, regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions associated with your system and/or its networked equipment. Also realize that, if such an intrusion should occur, it could result in a variety of losses to your company (including but not limited to, human/data privacy, intellectual property, material assets, financial resources, labor costs, and/or legal costs).

Responsibility for Your Company’s Telecommunications Security

The final responsibility for securing both this system and its networked equipment rests with you - Avaya’s customer system administrator, your telecommunications peers, and your managers. Base the fulfillment of your responsibility on acquired knowledge and resources from a variety of sources including but not limited to:

• Installation documents

• System administration documents

• Security documents

• Hardware-/software-based security tools

• Shared information between you and your peers

• Telecommunications security experts

Overview for the Avaya G430 Branch Gateway May 2014 3

To prevent intrusions to your telecommunications equipment, you and your peers should carefully program and configure:

• Your Avaya-provided telecommunications systems and their interfaces

• Your Avaya-provided software applications, as well as their underlying hardware/software platforms and interfaces

• Any other equipment networked to your Avaya products

TCP/IP Facilities

Customers may experience differences in product performance, reliability and security depending upon network configurations/design and topologies, even when the product performs as warranted.

Product Safety Standards

This product complies with and conforms to the following international

Product Safety standards as applicable:

• IEC 60950-1 latest edition, including all relevant national deviations as listed in the IECEE Bulletin—Product Category

OFF: IT and Office Equipment.

• CAN/CSA-C22.2 No. 60950-1 / UL 60950-1 latest edition.

This product may contain Class 1 laser devices.

• Class 1 Laser Product

• Luokan 1 Laserlaite

• Klass 1 Laser Apparat

Electromagnetic Compatibility (EMC) Standards

This product complies with and conforms to the following international

EMC standards, as applicable:

• CISPR 22, including all national standards based on CISPR 22.

• CISPR 24, including all national standards based on CISPR 24.

• IEC 61000-3-2 and IEC 61000-3-3.

Avaya Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Avaya Inc. The correction of interference caused by such unauthorized modifications, substitution or attachment will be the responsibility of the user. Pursuant to Part 15 of the Federal

Communications Commission (FCC) Rules, the user is cautioned that changes or modifications not expressly approved by Avaya Inc. could void the user’s authority to operate this equipment.

Federal Communications Commission Part 15 Statement:

For a Class A digital device or peripheral:

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

For a Class B digital device or peripheral:

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Equipment With Direct Inward Dialing (“DID”):

Allowing this equipment to be operated in such a manner as to not provide proper answer supervision is a violation of Part 68 of the FCC’s rules.

Proper Answer Supervision is when:

1. This equipment returns answer supervision to the public switched telephone network (PSTN) when DID calls are:

• answered by the called station,

• answered by the attendant,

• routed to a recorded announcement that can be administered by the customer premises equipment (CPE) user

• routed to a dial prompt

2. This equipment returns answer supervision signals on all (DID) calls forwarded back to the PSTN.

Permissible exceptions are:

• A call is unanswered

• A busy tone is received

• A reorder tone is received

Avaya attests that this registered equipment is capable of providing users access to interstate providers of operator services through the use of access codes. Modification of this equipment by call aggregators to block access dialing codes is a violation of the Telephone Operator

Consumers Act of 1990.

Automatic Dialers:

When programming emergency numbers and (or) making test calls to emergency numbers:

• Remain on the line and briefly explain to the dispatcher the reason for the call.

• Perform such activities in the off-peak hours, such as early morning or late evenings.

Toll Restriction and least Cost Routing Equipment:

The software contained in this equipment to allow user access to the network must be upgraded to recognize newly established network area codes and exchange codes as they are placed into service.

Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are established will restrict the



May 2014

customer and the customer’s employees from gaining access to the network and to these codes.

For equipment approved prior to July 23, 2001:

This equipment complies with Part 68 of the FCC rules. On either the rear or inside the front cover of this equipment is a label that contains, among other information, the FCC registration number, and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.

For equipment approved after July 23, 2001:

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council on Terminal

Attachments (ACTA). On the rear of this equipment is a label that contains, among other information, a product identifier in the format

US:AAAEQ##TXXX. If requested, this number must be provided to the telephone company.

The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed 5.0.

L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.

To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.

For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXX.

The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

Means of Connection:

Connection of this equipment to the telephone network is shown in the following table:

Manufact urer’s

Port

Identifier

Off premises station

1.544

digital interface

FIC Code

OL13C

04DU9.B

N

04DU9.1K

N

SOC/

REN/A.S.

Code

9.0F

6.0F

6.0F

Network

Jacks

RJ2GX,

RJ21X,

RJ11C

DID trunk

CO trunk

Tie trunk

Basic

Rate

Interface

02RV2.T

02GS2

02LS2

TL31M

02IS5

AS.2

0.3A

0.3A

9.0F

RJ2GX,

RJ21X,

RJ11C

RJ21X,

RJ11C

RJ21X,

RJ11C

RJ2GX

6.0F, 6.0Y RJ49C

RJ48C,

RJ48M

RJ48C,

RJ48M

Manufact urer’s

Port

Identifier

FIC Code

120A4 channel service unit

SOC/

REN/A.S.

Code

04DU9.1S

N

04DU9.D

N

6.0F

6.0Y

Network

Jacks

RJ48C,

RJ48M

RJ48C

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information, please contact the Technical Service Center at 1-800-242-

2121 or contact your local Avaya representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

Installation and Repairs

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. It is recommended that repairs be performed by Avaya certified technicians.

FCC Part 68 Supplier’s Declarations of Conformity

Avaya Inc. in the United States of America hereby certifies that the equipment described in this document and bearing a TIA TSB-168 label identification number complies with the FCC’s Rules and Regulations

47 CFR Part 68, and the Administrative Council on Terminal

Attachments (ACTA) adopted technical criteria.

Avaya further asserts that Avaya handset-equipped terminal equipment described in this document complies with Paragraph 68.316

of the FCC Rules and Regulations defining Hearing Aid Compatibility and is deemed compatible with hearing aids.

Copies of SDoCs signed by the Responsible Party in the U. S. can be obtained by contacting your local sales representative and are available on the following Web site: http://support.avaya.com/DoC .

Canadian Conformity Information

This Class A (or B) digital apparatus complies with Canadian ICES-003.


Cet appareil numérique de la classe A (ou B) est conforme à la norme

NMB-003 du Canada.

This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux specifications techniques applicables d’Industrie Canada.

European Union Declarations of Conformity

Avaya Inc. declares that the equipment specified in this document bearing the "CE" (Conformité Europeénne) mark conforms to the

European Union Radio and Telecommunications Terminal Equipment

Directive (1999/5/EC), including the Electromagnetic Compatibility

Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).

Copies of these Declarations of Conformity (DoCs) can be obtained by contacting your local sales representative and are available on the following Web site: http://support.avaya.com/DoC .

European Union Battery Directive

Avaya Inc. supports European Union Battery Directive 2006/66/EC.

Certain Avaya Inc. products contain lithium batteries. These batteries are not customer or field replaceable parts. Do not disassemble.

Batteries may pose a hazard if mishandled.

Japan

The power cord set included in the shipment or associated with the product is meant to be used with the said product only. Do not use the cord set for any other purpose. Any non-recommended usage could lead to hazardous incidents like fire disaster, electric shock, and faulty operation.

Trademarks

The trademarks, logos and service marks (“Marks”) displayed in this site, the Documentation, Hosted Service(s), and Product(s) provided by Avaya are the registered or unregistered Marks of Avaya, its affiliates, or other third parties. Users are not permitted to use such

Marks without prior written consent from Avaya or such third party which may own the Mark. Nothing contained in this site, the

Documentation, Hosted Service(s) and Product(s) should be construed as granting, by implication, estoppel, or otherwise, any license or right in and to the Marks without the express written permission of Avaya or the applicable third party.

Avaya is a registered trademark of Avaya Inc.

All non-Avaya trademarks are the property of their respective owners.

Linux

®

is the registered trademark of Linus Torvalds in the U.S. and other countries.

Downloading Documentation

For the most current versions of Documentation, see the Avaya


, or such successor site as designated by Avaya.

Contact Avaya Support

See the Avaya Support website: http://support.avaya.com

for Product or Hosted Service notices and articles, or to report a problem with your

Avaya Product or Hosted Service. For a list of support telephone numbers and contact addresses, go to the Avaya Support website: http://support.avaya.com

(or such successor site as designated by

Avaya), scroll to the bottom of the page, and select Contact Avaya

Support.

If this is a Class A device:

This is a Class A product based on the standard of the Voluntary

Control Council for Interference by Information Technology Equipment

(VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take corrective actions.

If this is a Class B device:

This is a Class B product based on the standard of the Voluntary

Control Council for Interference from Information Technology

Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.



May 2014

Contents

Chapter 1: Introduction......................................................................................................

9

Purpose..................................................................................................................................................... 9

Intended audience.................................................................................................................................... 9

Document changes since last issue.......................................................................................................... 9

Related resources..................................................................................................................................... 9

Documentation................................................................................................................................. 9

Training............................................................................................................................................ 11

Avaya Mentor videos........................................................................................................................ 11

Support...................................................................................................................................................... 11

Warranty.................................................................................................................................................... 12

Chapter 2: G430 Branch Gateway overview.....................................................................

13

Avaya Branch Gateway G430................................................................................................................... 13

Branch Gateway functions............................................................................................................... 13

Branch Gateway specifications................................................................................................................. 14

Minimum firmware requirements for G430................................................................................................ 14

Branch Gateway features.......................................................................................................................... 15

G430 physical description......................................................................................................................... 18

EM200 physical description...................................................................................................................... 19

Chapter 3: Optional components......................................................................................

21

Optional components................................................................................................................................ 21

Supported media modules............................................................................................................... 21

S8300D Media Server...................................................................................................................... 22

S8300D Server hardware requirements........................................................................................... 22

S8300D Server components............................................................................................................ 22

S8300D Server configuration........................................................................................................... 23

S8300D Server software.................................................................................................................. 23

Utility Services overview................................................................................................................... 24

Telephony media modules............................................................................................................... 25

VOIP Modules in G430..................................................................................................................... 29

MM712 DCP media module............................................................................................................. 29

MM717 DCP media module............................................................................................................. 30

MM710B E1/T1 media module......................................................................................................... 30

MM720 BRI media module............................................................................................................... 31

MM721 BRI media module overview................................................................................................ 31

MM722 BRI media module............................................................................................................... 33

Media module slot configurations............................................................................................................. 33

Permitted slots.................................................................................................................................. 33

G430 and EM200 media module capacity....................................................................................... 34

Chapter 4: Summary of services.......................................................................................

35

Summary of services................................................................................................................................. 35

IPv6.................................................................................................................................................. 35

Branch Gateway services................................................................................................................. 36

Physical media................................................................................................................................. 37

Media Gateway Controllers.............................................................................................................. 39


Audio and Video features................................................................................................................. 42

Additional features............................................................................................................................ 46

LAN services............................................................................................................................................. 47

LAN physical media.......................................................................................................................... 47

VLANs.............................................................................................................................................. 48

Rapid Spanning Tree Protocol (RSTP)............................................................................................ 48

Port mirroring.................................................................................................................................... 48

Port redundancy............................................................................................................................... 48

Link Layer Discovery Protocol (LLDP)............................................................................................. 48

WAN services............................................................................................................................................ 49

WAN physical media........................................................................................................................ 49

WAN features................................................................................................................................... 50

Data and Routing features............................................................................................................... 51

Chapter 5: Management, Security, Alarms and Troubleshooting..................................

53

Management, Security, Alarms and Troubleshooting............................................................................... 53

Management applications................................................................................................................ 53

Management access security features............................................................................................. 55

Network security features................................................................................................................. 55

Alarms and troubleshooting features................................................................................................ 55

Chapter 6: Branch Gateway capacities.............................................................................

59

Branch Gateway capacities....................................................................................................................... 59

Maximum Branch Gateway G430 capacities................................................................................... 59

S8300 maximum capacities............................................................................................................. 60

Chapter 7: Supported Avaya telephones..........................................................................

63

Supported Avaya telephones.................................................................................................................... 63

Avaya IP telephones................................................................................................................................. 63

Avaya DCP digital telephones.................................................................................................................. 63

Avaya analog telephones.......................................................................................................................... 64

Chapter 8: Technical specifications..................................................................................

65

Technical specifications............................................................................................................................ 65

Specifications............................................................................................................................................ 65

EM200 specifications................................................................................................................................ 66

Power cord specifications......................................................................................................................... 66

Media module specifications..................................................................................................................... 67

Index.....................................................................................................................................

69

8 Overview for the Avaya G430 Branch Gateway May 2014

Chapter 1: Introduction

Purpose

This document describes product characteristics and capabilities, including product overview and feature descriptions, interoperability, performance specifications, security, and licensing requirements.

Intended audience

The information in this book is intended for use by Avaya technicians, provisioning specialists, business partners, and customers.

Document changes since last issue

The following changes have been made to this document since the last issue:

• Added H.248 Registration Source Port section.

• Added Accessing diagnostic logs section.

Related resources

Documentation

Installation

Title Description Number


Introduction

Title

Quick Start for Hardware

Installation for the Avaya

Branch Gateway G430

Installing and Upgrading the

Avaya Branch Gateway G430

Description

A concise installation guide covering assembly and basic configuration of the G430

Number

03-603236

Describes how to install and upgrade the G430, prepare the G430 for software configuration, and perform some basic configurations. This guide describes how to insert media modules and connect external devices to the G4350 and media module ports.

03-603233

Administration

Administration for the Avaya

Branch Gateway G430

Avaya Branch Gateway G430

CLI Reference

Maintenance

Maintenance Alarms for Avaya

Aura

®

Communication

Manager, Branch Gateways and Servers

Maintenance Commands for

Avaya Aura

®

Communication


Maintenance Procedures for

Avaya Aura

®

Communication


Implementation

Operations Intelligence Suite

Advanced Implementation

Guide for SLA Mon

Describes how to configure and manage the G430 after it is already installed. This guide contains detailed information about all the features of the G450 and how to implement them.

03-603228

Describes the commands in the G430

CLI.

03-603234

Describes MOs and how to resolve alarms.

Describes all the commands across platforms.

Describes maintenance procedures such as network recovery

Describes installation and

Configuration of Service Level

Agreement Monitor

03-300430

03-300431

03-300432

100167328



May 2014

Support

Training

The following courses are available on https://www.avaya-learning.com

. To search for the course, in the Search field, enter the course code and click Go .

Course code

ATC00838VEN

AVA00821H00

Course title

Avaya Media Servers and Gateways Implementation Workshop

Avaya CM Architecture and Gateways: H.248, H.323, and

Proprietary

Avaya Mentor videos

Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot

Avaya products.

About this task

Videos are available on the Avaya Support website, listed under the video document type, and on the Avaya-run channel on YouTube.

• To find videos on the Avaya Support website, go to http://support.avaya.com

, select the product name, and check the videos checkbox to see a list of available videos.

• To find the Avaya Mentor videos on YouTube, go to http://www.youtube.com/

AvayaMentor and perform one of the following actions:

- Enter a key word or key words in the Search Channel to search for a specific product or topic.

- Scroll down Playlists, and click the name of a topic to see the available list of videos posted on the site.

Note:

Videos are not available for all products.

Support

Visit the Avaya Support website at http://support.avaya.com

for the most up-to-date documentation, product notices, and knowledge articles. You can also search for release notes, downloads, and resolutions to issues. Use the online service request system to create a service request. Chat with live agents to get answers to questions, or request an agent to connect you to a support team if an issue requires additional expertise.


Introduction

Warranty

Avaya provides a 90-day limited warranty on Branch Gateway. To understand the terms of the limited warranty, see the sales agreement or other applicable documentation. In addition, the standard warranty of Avaya and the details regarding support for Branch Gateway in the warranty period is available on the Avaya Support website at https://support.avaya.com

under

Help & Policies> Policies & Legal > Warranty & Product Lifecycle. See also Help &

Policies > Policies & Legal > License Terms.



May 2014

Chapter 2: G430 Branch Gateway overview

Avaya Branch Gateway G430

The Branch Gateway G430 is a multipurpose gateway targeting small and medium branches of 1 to 150 users. The G430 supports two expansion modules to support varying branch office sizes.

Related topics:

Branch Gateway functions

on page 13

Branch Gateway functions

The Branch Gateway:

• Works in conjunction with Avaya Aura

®

Communication Manager IP telephony software running on Avaya S8XXX Servers to help deliver intelligent communications to enterprises of all sizes

• Combines telephone exchange and data networking, by providing PSTN toll bypass, and routing data and VoIP traffic over the WAN

• Features a VoIP engine and Ethernet LAN connectivity.

• Provides full support for Avaya IP and digital telephones, as well as analog devices such as modems, fax machines, and telephones.

Telephone services on a Branch Gateway are controlled by an Avaya S8XXX Server operating either as an External Call Controller (ECC) or as an Internal Call Controller (ICC). The Branch

Gateway supports:

• The Avaya S8300 Server as an ICC, or as an ECC when the S8300 is installed in another

Branch Gateway

• The Avaya S88XX and S85XX Servers as ECCs

An ICC can be used in addition to an ECC with the ICC installed as a Survivable Remote Server

(SRS) designed to take over call control in the event that the ECC fails or the WAN link between the branch office and main location breaks. The SRS provides full featured telephone service survivability for the branch office. The Branch Gateway also features Standard Local


G430 Branch Gateway overview

Survivability (SLS) (IPv4 only), which provides basic telephone services in the event that the connection with the primary ECC is lost.

Branch Gateway specifications

G430 is a scalable device with a basic configuration consisting of one power supply unit (PSU) and 256 MB RAM. G430 v1 has one on-board VoIP module providing 25 VoIP channels for

G.711 and G.726 and 20 channels for G.729, and an additional slot for the optional insertion of an MP10, MP20, MP80, or MP120 VoIP module. If an MP120 is installed on G430 v1, the on-board VOIP module is disabled. G430 v2 has no on-board VOIP module. You can also replace the 256 MB RAM with 512 MB RAM and use an external compact flash to increase the number of announcement files from 256 to 1024 and increase announcement time from

45 minutes to 4 hours.

The Branch Gateway is a modular device, adaptable to support different combinations of endpoint devices. While fixed front panel ports support the connection of external LAN switches, Ethernet WAN lines, and external routers, three slots are provided for plugging in optional media modules. Two EM200 expansion modules can be connected to the G430, providing two media module slots each, bringing the total number of available media module slots to seven. Pluggable media modules provide interfaces for different types of telephones and trunks. A combination is selected to suit the needs of the branch. A range of telephony modules provides full support for legacy equipment such as analog and digital telephones. IP phones are supported via an external LAN switch.

The G430 features field replaceable RAM memory card and DSP childboard.

Minimum firmware requirements for G430

v1a v2a

(MP120

Preinstalled)

Comments Recommended CM

Version

- Older versions of CM will work

CM 5.0 (SP) BGW 5.0

27.31

.0

BGW 5.1

28.27

.0

BGW 5.2

29.24

.0

Yes No

Yes No

Yes No No BGW support

MP120

CM 5.1 (SP)

CM 5.2 (SP)



May 2014

Branch Gateway features

BGW 5.2.1 30.28

BGW 6.1

.0

31.26

.0

BGW 6.2.1 32.26

BGW 6.3

BGW 6.3.1 34.6.0

BGW 6.3.5 35.x.y

BGW 6.3.6

JITC

.0

33.13

.0

36.x.y

v1a

Yes

Yes

Yes

Yes

Yes

Yes

Yes

v2a

(MP120

Preinstalled)

No

No

No

No

No

Yes

Yes

Comments

No BGW support

MP120

No BGW support

MP120

No BGW support

MP120

No BGW support

MP120

No BGW support

MP120

MP120

Support

V150.1

Features

Recommended CM

Version

- Older versions of CM will work

CM 5.2.1(SP 16) or higher

(CM blocks more than 105 channels)

CM 6.0.1


AA 6.2 FP1 CM 6.2 sp 4 —

Dec 2012


AA 6.2 FP2 CM 6.3 — May

2013

(CM supports all 120 channels)

AA6.2 FP3 CM6.3.2 — Oct

2013


AA 6.2 FP3 CM 6.3.2 +


AA 6.2 FP 4 CM 6.3.6

AA 6.2 FP3 CM 6.3.2 +


Branch Gateway features

Note:

Certain features are supported in IPv4 only.

• Hardware features:

- 3-slot chassis (three slots for media modules)

- Two EM200 expansion modules, each providing two slots each for media modules

- Hot-swappable media modules



- Support for hot-swappable external compact flash

- VoIP DSPs (up to 105 channels)

- Memory SoDIMMs

• Voice features:

- H.248 gateway

- Voice line interfaces:

• IP phones

• Analog phones

• Avaya DCP phones

• BRI Phones

• FXS/Fax

• VoIP

• Fax and modem over IP

- Voice trunk interfaces:

• FXO

• BRI

• T1/E1

- Supported CODECs: G.711A/μLaw, G.729a, G.726

- Survivability features for continuous voice services:

• Local Survivable Processor (LSP) (with S8300)

• Standard Local Survivability (SLS) (IPv4 only)

• Emergency Transfer Relay (ETR)

• Modem Dial Backup

• Dynamic Call Admission Control (CAC) for Fast Ethernet and GRE tunnel interfaces

• Inter-Gateway Alternate Routing (IGAR)

- DHCP and TFTP server to support IP phones images and configuration (IPv4 only)

- Announcements support

- Contact Closure support

• Routing and WAN features:

Note:

IPv6 is not supported on the WAN.

- One WAN 10/100 Ethernet port with traffic shaping capabilities



May 2014

- PPPoE (IPv4 only) and PPP (IPv4 only)

- Routing Protocols: Static, OSPF, RIP

- VRRP (IPv4 only)

- Equal Cost Multi Path routing (ECMP)

- IPSec VPN

- cRTP

- WAN Quality of Service (QoS)

- Policy-based routing

- DHCP relay

- GRE tunneling

- Dynamic IP addressing (DHCP client/PPPoE)

- Object tracking

- Backup Interface

• LAN features:

- Two LAN 10/100 RJ-45 Ethernet ports (w/o POE)

- Auto-negotiation

- 2K MAC table with aging

- 8 VLANs

- Multi-VLAN binding, 802.1Q support

- Ingress VLAN Security

- Broadcast/Multicast storm control

- Automatic MAC address aging

- Rapid Spanning Tree

- Port mirroring

- RMON statistics

- Port redundancy

- LLDP (IPv4 only)

• Security hardened gateway features:

- Media and signaling encryption

- Secured management

- Digitally signed gateway firmware

- Managed security service support

Branch Gateway features



- Access list support

• Management features:

- Avaya Device Manager

- Embedded Web Manager (IPv4 only)

- RADIUS Authentication support (IPv4 only)

- SNMPv1 traps and SNMPv3 notifications

- SNMPv1 and SNMPv3 servers support

- Telnet (IPv4 only) and SSHv2 support

- SCP, TFTP, and FTP clients

- Syslog client

- Modem access for remote administration

- Packet Sniffing

- RTP-MIB

- Backup and Restore on USB Flash drive

G430 physical description

Figure 1: The Branch Gateway G430 Chassis

Figure notes:

1. System LEDs

2. RST button

3. ASB button

4. USB ports

5. CCA (Contact Closure) port

6. 10/100M Services port

7. 10/100M ETH WAN port

8. Two 10/100M ETH LAN ports



May 2014

EM200 physical description

9. Compact Flash slot

10. V1 — slot for media module or S8300 Server

11. V2 — slot for media module

12. V3 — slot for media module

For information about the different media modules that can be housed in the G430 media module slots, see

Chapter 2: Optional components on page 21.

Name

CCA

ETH WAN

ETH LAN

SERVICES

USB

RST

ASB

Description

RJ-45 port for ACS (308) contact closure adjunct box.

One 10/100 Base TX Ethernet WAN port.

RJ-45 connector.

Two 10/100 Base TX Ethernet LAN ports.

RJ-45 connectors.

Ethernet 10/100 port for services and maintenance access. RJ-45 connector.

Two USB 2.0 ports with USB connectors.

Supports the connection of:

• USB flash drive. No more than one USB flash drive can be connected.

• USB modem: Multitech MultiModemUSB

MT5634ZBA-USB-V92, or USRobotics

USB modem model 5637. No more than one USB modem can be connected.

Reset button. Resets chassis configuration.

Alternate Software Bank button. Reboots the

G430 with the software image in the alternate bank.

EM200 physical description



1.

2.

3.

System LEDs

V5/V7 — slot for media module

V6/V8 — slot for media module

For information about the different media modules that can be housed in the EM200 media module slots, see

Chapter 2: Optional components on page 21.



May 2014

Chapter 3: Optional components

Optional components

The Branch Gateway is a versatile device with powerful capabilities that can be expanded to include up to two EM200 expansion modules. To implement the various services that are supported, a variety of swappable internal components called media modules are available.

Related topics:

Supported media modules

on page 21

S8300D Server hardware requirements on page 22

S8300D Server components

on page 22

S8300D Server configuration on page 23

S8300D Server software on page 23

Telephony media modules

on page 25

VOIP Modules in G430 on page 29

MM712 DCP media module

on page 29

MM717 DCP media module

on page 30

MM710B E1/T1 media module on page 30

MM720 BRI media module

on page 31

MM721 BRI media module overview on page 31

MM722 BRI media module

on page 33

Supported media modules

Media module

S8300 C/D

Telephony media modules

Description

Communication Manager server

MM711

MM714

8 universal analog ports

4 analog telephone ports and 4 analog trunk ports

Comment

In slot V1 only


Optional components

Media module

MM714B

MM716

MM712

MM717

MM710

MM710B

MM720

Description

4 analog telephone ports, 4 analog trunk ports, and an emergency transfer relay

24 analog ports

8 DCP telephone ports

24 DCP telephone ports

1 T1/E1 ISDN PRI trunk port

MM721

MM722

8 ISDN BRI trunk or endpoint (telephone or data) ports

8 ISDN BRI trunk or endpoint (telephone or data) ports

2 ISDN BRI trunk ports

Comment

Caution:

The MM340 and MM342 are not supported by the Avaya Branch Gateway G430. Do not insert an MM340 or MM342 media module into an G430 Branch Gateway.

S8300D Media Server

S8300D Server hardware requirements

The hardware for S8300D Server as a primary controller is identical to the hardware for S8300D

Server as a survivable remote server. The difference between the two configurations is only in software.

S8300D Server components

For a list of S8300D components used in each S8300D configuration, see the S8300D Server configuration section.



May 2014

Optional components

S8300D Server configuration

The S8300D Server is supported by Communication Manager Release 5.2 and later.

An S8300D Server is an Intel Core 2 Duo U5700 processor that runs on the Linux operating system. The S8300D Server resides in Slot V1 of a gateway and includes:

• 250-GB hard disk

• 8-GB DRAM (with one 1 GB DIMM)

• 4-GB Internal Solid State Drive (SSD)

• One USB ports and a 10/100 Base-T port

- One USB port supports a readable DVD/CD-ROM drive, which is used for system installations and upgrades.

• One services port

• One internal Compact Flash drive, which is used as the primary reboot device

• Modem support for alarming

S8300D Server software

S8300D Server supports the following:

• A web server that is used for:

- Backing up and restoring customer data

- Viewing current alarms

- Maintaining the server

- Enabling and disabling the modem

- Starting and stopping the FTP server

- Viewing the software license

- Accessing SNMP to configure trap destinations and to start and stop the master agent

- Viewing the configuration information

- Upgrading

• A Linux operating system

• Trivial File Transfer Protocol (TFTP)

• A secure HTTP server for IP phone file downloads


Optional components

• H.248 Branch Gateway Signaling Protocol

• Control messages over H.323 Signaling Protocol

Utility Services overview

With Utility Services Release 6.2 and later, you can connect the Utility Services applications and tools with the duplex Communication Manager template or the Main Survivable Server template that runs on a separate server. When you deploy Utility Services as a standalone template, the system supports Utility Services for the Communication Manager Duplex deployment solution.

The following sections describe the Utility Services applications.

Utility Admin

With the Utility Admin page, you can configure and gain access to the following elements:

• Software Version: Displays the software versions of packages, operating system, IP telephone firmware, media module firmware, and gateway firmware that are active on

Utility Services.

• Firewall Rules: Displays the IPv4 and IPv6 firewall rules of Utility Services.

• IP Phone file server: Supports the download of the IP telephone firmware and the settings files. The server also supports backing up and restoring of IP telephone user configuration, for example, speed dial configurations.

• ADVD Settings Editor: Provides a Web-based tool for configuring the Avaya Desktop

Video Device (ADVD) settings file. ADVD Settings Editor provides enhanced validation to avoid wrong configurations.

• IP Phone Settings Editor: Provides a Web-based tool for configuring the IP telephone settings file. IP Phone Settings Editor provides enhanced validation to avoid wrong configurations.

• IP Phone firmware management: Supports the upload of the new telephone firmware to the file server.

• DHCP server: Provides basic DHCP server capabilities for supporting IP telephones.

• IPv6 DHCP server: Provides IPv6 DHCP server capabilities for supporting IP telephones.

• IP Phone Push Server: Displays the content from Push Server Database.

• Log viewer: Provides access of the log files for the Utility Services applications.

• CDR tools: Provides a Call Detail Record (CDR) collection capability. The CDR tool collects the CDR records from Communication Manager and imports the records into the



May 2014

Optional components

Utility Services database. The CDR tool also provides simple examples on using the CDR data in the database.

MyPhone Admin

With the MyPhone Admin page, you can gain access to the following configuration elements of MyPhone and IP telephone operations:

• MyPhone Feature Buttons: Enable or disables the features available to the MyPhone users.

• WML Links: Displays the default Wireless Markup Language (WML) page on the IP telephones. You can use this element to configure the default WML page.

• System Message: Configures the WML page. This element contains a block of text that is relevant to every IP telephone user.

For more information about MyPhone Admin, see Avaya Communication Manager Express

MyPhone Administration Reference, 03-602578.

MyPhone

With the MyPhone page, you can:

• Configure the IP telephones.

• Configure buttons, language settings, EC500, Enhanced Call forwarding, and other features.

• Configure the security codes and other parameters.

For more information about MyPhone, see Avaya Communication Manager Express MyPhone

Quick Reference, 03-602253.

MyPhone User Guide

You can download a PDF file or an online HTML file to view the MyPhone documentation.

Telephony media modules

The Branch Gateway supports the MM711, MM714, MM714B, and MM716 analog media modules, the MM712 and MM717 DCP media modules, the MM710B E1/T1 media module, and the MM720, MM721 and MM722 BRI media modules.

Related topics:

MM711 analog media module

on page 26


Optional components


on page 27

MM714B analog media module

on page 28


on page 28

MM716 ports

on page 28

Other MM716 features and functionality on page 28

MM711 analog media module

The MM711 provides analog trunk and telephone features and functionality.

Related topics:

MM711 ports

on page 26


MM711 ports

The administrator can configure any of the eight ports of the MM711 as follows:

• Central office trunk, either loop start or ground start

• Analog Direct Inward Dialing (DID) trunks, either wink-start or immediate-start

• 2-wire analog Outgoing CAMA E911 trunks for connectivity to the PSTN

• MF signaling is supported for CAMA ports

• Analog, tip/ring devices, such as single-line telephones with or without LED message waiting indication

Other MM711 features and functionality

• Three ringer loads (ringer equivalency number) for up to 2,000 feet (610 meters) for all eight ports

• Up to eight simultaneously-ringing ports

Note:

The Branch Gateway achieves this number of ports by staggering the ringing and pauses between two sets of up to four ports.

• Type 1 Caller ID

• Ring voltage generation for a variety of international frequencies and cadences

Figure 2: The MM711 media module



May 2014

Optional components


The MM714 analog media module provides four analog telephone ports and four analog trunk ports.

Note:

The four analog trunk ports cannot be used for analog DID trunks. Instead, the four analog telephone ports must be used.

Related topics:

MM714 ports

on page 27

MM714 line ports

on page 27


MM714 ports

The MM714 provides you with the capability to configure any of the four trunk ports as:

• A loop start or a ground start central office trunk with a loop current of 18 to 120 mA

• A two-wire analog Outgoing CAMA E911 trunk, for connectivity to the PSTN. MF signaling is supported for CAMA ports.

MM714 line ports

The MM714 provides you with the capability to configure any of the four telephone ports as:

• A wink-start or an immediate-start DID trunk

• Analog tip/ring devices such as single-line telephones with or without LED message waiting indication


• Three ringer loads, which is the ringer equivalency number for up to 2,000 feet (610 meters) for all eight ports

• Up to four simultaneously-ringing ports

• Type 1 caller ID and Type 2 caller ID




Optional components

MM714B analog media module

The MM714B analog media module provides all the features provided by the MM714 (see


on page 27), and in addition provides an emergency transfer relay.

Related topics:

MM714B and ETR on page 28

MM714B and ETR

In the event of system failure, the MM714B provides emergency transfer relay (ETR) services by connecting trunk port 5 and line port 4.

Figure 4: The MM714B media module


The MM716 provides 24 analog ports supporting telephones, modem, and fax. These ports can also be configured as DID trunks with either wink-start or immediate-start. The 24 ports are provided via a 25 pair RJ21X amphenol connector, which can be connected by an amphenol cable to a breakout box or punch-down block.

MM716 ports

The MM716 provides you with the capability to configure any of the 24 ports as:

• Analog tip/ring devices such as single-line telephones with or without LED message waiting indication

• A wink-start or an immediate-start DID trunk


• Three ringer loads, which is the ringer equivalency number for up to 2,000 feet (610 meters) for all 24 ports

• Up to 24 simultaneously-ringing ports



May 2014

Optional components

• Type 1 caller ID


The MM716 is compatible with Avaya Aura

® ™

Communication Manager release 3.1 and higher, and Branch Gateway firmware version 29.x.x and higher.


VOIP Modules in G430

A media processor or a VOIP module provides the resources/channels to support voice, modem, fax calls over IP.

G430 supports the VOIP modules listed in the table below:

VOIP Modules

MP10

MP20

MP80

MP120

Description

Supports a maximum of 10 channels.

Supports a maximum of 20 channels

• Provides 25 VOIP channels for G.711 and

G.726

• Provides 20 VOIP channels for G.729

Supports a maximum of 80 channels

Supports a maximum of 120 channels.

The MP120 is capable of supporting new media services such as V.150.1. In the past, all DSP cards were capable of supporting all codec types, albeit with various performance differences in terms of point costs. However, the V.150.1 protocol is not supported on the older media processors.

G430 supports a maximum of 120 channels.

If an MP120 is installed on a G430 v1, the onboard VoIP module will be disabled.

MM712 DCP media module

The MM712 DCP media module provides eight DCP telephone ports. The ports support two-

wire Digital Communications Protocol (DCP) telephones. See Supported Avaya telephones

on page 63 for a list of compatible DCP telephones.


Optional components


MM717 DCP media module

The MM717 DCP media module provides 24 DCP ports of two-wire DCP functionality exposed as a single 25-pair amphenol connector. The DCP ports are exposed by connecting the module via a standard amphenol cable to a punch-down block with RJ-11 jacks. The MM717 allows you to use one of the smaller media module slots for a large number of DCP telephones.


MM710B E1/T1 media module

Note:

This information applies to the MM710 as well.

The MM710B E1/T1 media module terminates an E1 or T1 trunk. The MM710 has a built-in

Channel Service Unit (CSU) so an external CSU is not necessary. The CSU is only used for the T1 circuit.

The MM710B features:

• ISDN PRI capability (23B+D or 30B+D)

• Trunk signaling to support US and International CO or tie trunks

• Echo cancellation in either direction

Figure 8: The MM710B media module



May 2014

Optional components

MM720 BRI media module

The MM720 BRI media module provides eight ports with RJ-45 jacks that can be administered either as BRI trunk connections or BRI endpoint (telephone and data module) connections.

Note:

The MM720 BRI media module cannot be administered to support both BRI trunks and BRI endpoints at the same time. However, the MM720 BRI Media Module supports combining both B-channels together to form a 128-kbps channel. Communication Manager 3.1 enables combining B-channels, using BONDing, to form a higher bandwidth connection. Finally, if the MM720 BRI Media Module is administered to support BRI endpoints, it cannot be used as a clock synchronization source.

For BRI trunking, the MM720 BRI media module supports up to eight BRI interfaces to the central office at the ISDN TE reference point. Information is communicated in two ways:

• Over two 64-kbps channels, called B1 and B2, that can be circuit-switched simultaneously

• Over a 16-kbps channel, called the D-channel, that is used for signaling. The MM720 occupies one time slot for all eight D channels.

The circuit-switched connections have an A- or Mu-law option for voice operation. The circuitswitched connections operate as 64-kbps clear channels when in the data mode.

For BRI endpoints, the MM720 BRI media module supports up to 16 BRI stations and data modules that conform to AT&T BRI, World Class BRI, and National ISDN NI1/NI2 BRI standards. The MM720 BRI media module provides -40 volt phantom power to the BRI endpoints.


MM721 BRI media module overview

The MM721 Basic Rate Interface (BRI) media module contains eight ports. You can administer these ports either as BRI trunk or BRI endpoint connections, such as a telephone and data module.

Note:

You cannot administer the MM721 BRI media module to support both BRI trunks and BRI endpoints at the same time. You can use all eight ports on the MM721 for just stations or just trunks. You cannot use a mixture of ports for both applications.


Optional components

For BRI trunking, the MM721 BRI media module supports up to eight BRI interfaces to the central office at the ISDN S/T reference point.

For BRI endpoints, each of the eight ports on the MM721 BRI media module supports integrated voice and data endpoints for up to 2 BRI stations or data modules or both. The

MM721 BRI media module provides -48 volt phantom power to the BRI endpoints.

The MM721 BRI media module supports 4-wire S/T ISDN BRI on each interface.

The MM721 BRI media module communicates information in two ways:

• Over two 64-kbps channels called B1 and B2. You can circuit-switch these channels simultaneously

• Over a 16-kbps channel called the D-channel that is used for signaling

The circuit-switched connections have an A-law or Mu-law option for voice operation. In the data mode, circuit-switched connections operate as 64-kbps clear channels.

The MM721 supports the G450 and G430 Branch Gateways with Communication Manager

Release 6.0.1 build 31_18_1.

You can also use the MM721 to support the G700 and G350 Branch Gateways with

Communication Manager Release 5.2.1 build 30_17_2.

• In non-native admin mode, the system displays the MM721 media module as MM720X for the Communication Manager Release 6.0.1 build 31_18_1 and Release 5.2.1 build

30_17_2.

• In admin mode, the system displays the MM721 media module as MM721 with

Communication Manager Release 6.2 and later. The changes on the system display on upgrading the system.

Note:

If you replace the MM720 media module, first uninstall the MM720 media module before installing the MM721 media module.

The following table provides the MM721 media module display information on different

Communication Manager releases.

6.2 and later Release 5.2.1/6.0.1 and earlier

Administer MM720 (non-native admin)

Insert

Result

MM721

No Board

5.2.1 SP7/6.0.1 SP1

MM720 (non-native admin)

MM721

MM720X

MM721 (Native)

MM721

MM721

Related topics:

Front panel of the MM721 media module on page 33



May 2014

Media module slot configurations

Front panel of the MM721 media module

MM722 BRI media module

The MM722 BRI media module provides two 4 wire S/T ISDN BRI 2B+D access ports with

RJ-45 jacks. Each port interfaces to the central office at the ISDN T reference point. Information

is communicated in the same manner as for the MM720. See MM720 BRI media module on

page 31.


Note:

The MM722 media module does not support BRI stations or combining both B channels together to form a 128-kbps channel.

Media module slot configurations

When choosing a combination of media modules to install in the Branch Gateway chassis and

EM200 expansion modules, consider the slots in which each module type can be housed, and the limitations and recommendations regarding combinations of media modules.

Related topics:

Permitted slots on page 33

G430 and EM200 media module capacity

on page 34

Permitted slots

The Branch Gateway G430 chassis has three media module slots, marked V1, V2, and V3.

Each of the two optional EM200 expansion modules has two media module slots each.

See EM200 physical description

on page 19. The slots of the EM200 connected to the

EXPANSION OUT 1 connector on the rear of the G430 are slots V5 and V6, and the slots of


Optional components the EM200 connected to the EXPANSION OUT 2 connector on the rear of the G430 are slots

V7 and V8.

Table 1: Permitted slots for media modules

Media module

MM710, MM710B

MM711

MM712

MM714, MM714B

MM716

MM717

MM720

MM721

MM722

S8300 C/D

Permitted slots

Any media module slot: V1-V3, V5-V8.

Any media module slot: V1-V3, V5-V8








V1

G430 and EM200 media module capacity

The G430 chassis is designed to accommodate:

• Up to three of the following telephony media modules: MM710, MM710B, MM711,

MM712, MM714, MM714B, MM720, MM721, MM722

• Up to two of the following telephony modules: MM716, MM717

• Up to one S8300 server (in slot V1 only)

Each EM200 chassis is designed to accommodate:

• Up to two of the following telephony media modules: MM710, MM711, MM712, MM714,

MM714B, MM716, MM717, MM720, MM721, MM722

Note:

Although you can insert a total of seven MM710 media modules in the extended G430 (a

G430 with two EM200 expansion modules), the optimum number is four MM710 media modules, since the G430 can support up to 120 VoIP channels.

Note:

Although you can insert a total of seven MM721 media modules in the extended G430 (a

G430 with two EM200 expansion modules), the maximum number allowed is four MM721 media modules.



May 2014

Chapter 4: Summary of services

Summary of services

The Branch Gateway offers various services, which are described in

Branch Gateway services

on page 36 , LAN services

on page 47 and WAN services

on page 49.

Related topics:

IPv6 on page 35

Branch Gateway services on page 36

Physical media on page 37

Media Gateway Controllers on page 39

Audio and Video features

on page 42

IPv6

Internet Protocol version 6 (IPv6) is the successor to IPv4. IPv6 supports 128–bit addresses and satisfies the rapidly growing demand for IP addresses. In contrast, IPv4 supported 32–bit.

IPv6 also improves security, ease of configuration, and routing performance. IPv6 can coexist with IPv4 networks, easing the transition process.

The IETF (Internet Engineering Task Force) published RFC 2460, the internet standard specification that defines IPv6, in December 1998.

Addressing

By using 128-bit addresses, IPv6 has about 3.4x10

38

unique IP addresses, more than enough for every network device. This eliminates the IPv4 mechanisms, such as NAT (network address transitions), that are used to relieve IP address exhaustion. IPv6 addresses are normally written as hexadecimal digits with colon separators, for example: 2005:af0c:168d::752e:

375:4020. The double colon “::” represents a string of zeroes, according to RFC4291.

Simplicity

IPv6 simplifies the routing process by changing the packet header and packet forwarding:

• Simplified packet header, despite enhanced functionality.

• IPv6 routers do not perform fragmentation. This is carried out by IPv6 hosts.

• IPv6 routers do not need to recompute a checksum when header fields change.


Summary of services

• Routers no longer need to calculate the time a packet spent in a queue.

• IPv6 supports stateless address configuration, so IPv6 hosts can be configured automatically when connected to a routed IPv6 network through ICMPv6. Stateful configuration using DHCPv6 and static configuration are also available.

Deployment and transition

There are several mechanisms that ease the deployment of IPv6 running alongside IPv4. The key to the transition is dual-stack hosts. Dual-stack hosts refers to the presence of two IP software implementations in one operating system, one for IPv4 and one for IPv6. These dualstack hosts can run the protocols independently or as a Hybrid. The Hybrid is the common form on recent server operating systems and computers.

When an IPv6 host or network must use the existing IPv4 infrastructure to carry IPv6 packets,

Tunneling provides the solution. Tunneling encapsulates IPv6 packets within IPv4. Tunneling can be either automatic or configured, the latter being more suitable for large, welladministered networks.

Key differences between IPv4 and IPv6

Address space

Security

Configuration

Address format

Broadcast and Multicast support

QoS support

IPv4

32-bit, about 4.3x10

9

IPSec support is optional.

Requires DHCP or manual configuration.

Decimal digits with colon separators, for example:

192.168.1.1

Yes

ToS using DIFFServ

IPv6

128-bit, about 3.4x10

38

IPSec support is required.

Stateless auto-configuration.

Does not require DHCP or manual configuration.

Hexadecimal digits with colon separators. For example: 2005:af0c:168d::

752e:375:4020. The double colon “::” represents four zeros “0000”

No Broadcast. Various forms of Multicast — better network bandwidth efficiency

Flow labels and flow classes, more granular approach.

Feature Support in Avaya Branch Gateways

Certain Branch Gateway features are not supported in IPv6.

Branch Gateway services

The Branch Gateways provide a telephone exchange service, supporting the connection of various types of telephones and outside telephone lines. Telephones and lines are connected



May 2014

Summary of services to the Branch Gateways through media modules on the chassis. Different media modules provide access ports for different types of telephones and lines.

Telephony services are controlled by a Media Gateway controller (MGC) running

Communication Manager (Communication Manager) call processing software. You can use the Avaya to configure many advanced telephone exchange functions. For more information, see Administrator’s Guide for Communication Manager.

This section describes the services the Branch Gateway provides as a gateway.

Related topics:

Voice over IP (VoIP)

on page 37

Voice over IP (VoIP)

The Branch Gateway:

• Features up to twoVoIP DSPs that provide voice services over IP data networks.

• Allows you to use many types of telephones and trunks that do not directly support

VoIP.

• Translates voice and signalling data between VoIP and the system used by the telephones and trunks, as follows: Avaya media modules convert the voice path of traditional circuits such as analog trunk and DCP to a TDM bus inside the Branch

Gateway. The VoIP engine then converts the voice path from the TDM bus to a compressed or uncompressed and packetized VoIP on an Ethernet connection.

The Branch Gateway provides VoIP services over the LAN and WAN. The G430 has an onboard VoIP DSP providing 25 VoIP channels, and supports an optional additional DSP board providing 10, 25, or 80 VoIP channels. The maximum number of active channels supported is

105. All channels can be bi-directional FAX, G.711 u/A, G.726A calls, in case of G.729A/AB the maximum number of channels on the on-board DSP is 20.

Physical media

There are various types of telephones and lines supported by the Branch Gateway and access ports provided for their connection.

Related topics:

Telephones

on page 38

Voice software

on page 38

Outside telephone lines

on page 38


Summary of services

Telephones

The Branch Gateway supports IP telephones, Avaya DCP telephones, analog telephones, and

BRI telephones. For information about which Avaya telephones are supported, see Appendix

B: Supported Avaya telephones

on page 63.

Telephones must be connected to the correct type of port for the telephone type. Different types of telephone ports are provided by different media modules. The table below lists which

ports you can use to connect each type of telephone. See Chapter 2: Optional components on

page 21 for more information about each type of port and media module.

Table 2: Telephones supported and ports provided

Telephone type

IP telephones

Ports

An external LAN switch must be connected to one of the front panel

ETH LAN ports.

Note:

The registration and signaling control information is under the direct control of the S8xxx server.

Avaya DCP digital telephones

DCP ports on the MM712 and MM717 media modules.

Analog telephones Analog line ports on the MM711, MM714, MM714B, and MM716 analog media modules.

Voice software

The Branch Gateway supports telephone calls between a computer on the network running

Avaya Softphone software and analog telephones connected to the Branch Gateway.

Outside telephone lines

The table below lists which modules you can use to connect each type of outside line. See

Chapter 2: Optional components

on page 21 for more information about each type of port and media module.

Table 3: Outside telephone lines supported and ports provided

Line Type

ISDN line

Ports

ISDN ports on the MM720, MM721 and MM722 BRI media modules.



May 2014

Summary of services

Line Type

Analog trunks

T1/E1 voice lines

Ports

Analog trunk ports on the MM714 or MM714B analog media module.

Universal analog ports on MM711.

DID trunk ports with wink-start and immediate-start only on

MM716.

The T1/E1 port on the MM710 T1/E1 media module.

Media Gateway Controllers

A Media Gateway Controller (MGC) controls telephone services on a Branch Gateway. An

MGC may be internal or external to the Branch Gateway. An Internal Call Controller (ICC) is an internal MGC. An External Call Controller (ECC) is an external MGC that communicates with the Branch Gateway over the network.

An Avaya S8XXX server managed with Avaya Aura

®

Communication Manager

(Communication Manager) software acts as an MGC for the Branch Gateway.

Related topics:

Supported S8XXX servers

on page 39

Configuration rules for Branch Gateway options

on page 40

Branch Gateway management on page 41

Avaya AuraCommunication Manager features on page 41

Avaya AuraCommunication Manager software applications

on page 42

Supported S8XXX servers

The MGCs supported by the Branch Gateway include both ECCs and ICCs. The Branch

Gateway supports the following MGCs:

Table 4: MGCs supported by the Branch Gateways

MGCs

Avaya S8300D Server

Avaya S8800 Server

Dell R610

Type

Media module

External

External

Usage

ICC, ECC or LSP

ECC

ECC


Summary of services

Configuration rules for Branch Gateway options

The Branch Gateway provides the following configuration options to help you ensure continuous telephone services:

• You can configure the Branch Gateway to use up to four MGCs, each controller can have one IPv4 and IPv6 address. If the MGC is an S8710, S8720, or S8730, the first server on the list is normally be the primary C-LAN board connected to the S8xxx server. If the MGC is an S8400 or S85XX, the first server on the list is either the primary C-LAN board connected to the S8xxx server or an Ethernet port on the server that you enabled for processor Ethernet connections. If the MGC is an S8300, the first server on the list is the

IP address of the S8300. The remaining servers are alternate C-LAN boards connected to the S8xxx server (S8400, S85XX, or S87XX servers), an S8300 configured as an SRS, or the port enabled as the Ethernet processor port on an S85XX configured as an SRS.

• Using the connection preserving migration feature, you can configure the Branch

Gateway to preserve the bearer paths of stable calls if the Branch Gateway migrates to another MGC (including an SRS), including migration back from an SRS to the primary

MGC. A call for which the talk path between parties in the call is established is considered stable. A call consisting of a user listening to announcements or music is not considered stable and is not preserved. Any change of state in the call prevents the call from being preserved. For example, putting a call on hold during MGC migration causes the call to be dropped. Special features, such as conference and transfer, are not available on preserved calls. Connection preserving migration preserves all types of bearer connects except BRI. PRI trunk connections are preserved.

• You can configure Standard Local Survivability (SLS) to enable a local Branch Gateway to provide a degree of MGC functionality when no link is available to an external MGC.

You configure SLS from the Branch Gateway using the CLI. SLS is supported for all analog interfaces, ISDN BRI/PRI trunk interfaces, non-ISDN digital DS1 trunk interfaces

(T1 Robbed Bit and E1-CAS), IP telephones, IP softphones, and DCP telephones. SLS is available on IPv4 only

• You can configure Enhanced Local Survivability (ELS) by installing an S8300 in the

Branch Gateway as a Survivable Remote Server (SRS). In this configuration, the S8300 is not the primary MGC but takes over to provide continuous telephone service if all external MGCs become unavailable. Calls in progress continue without interruption when the S8300 takes over.

• You can configure the dialer interface to connect to the Branch Gateway’s primary MGC by a USB modem if the connection between the Branch Gateway and the MGC is lost.

• You can configure Avaya Communication Manager to support the auto fallback feature, which enables an Branch Gateway being serviced by an SRS to return to the primary

MGC automatically when the connection is restored between the Branch Gateway and the MGC. When the Branch Gateway is being served by the SRS, it automatically attempts to register with the MGC at periodic intervals. The MGC can deny registration in cases in which it is overwhelmed with call processing, or in other configurable



May 2014

Summary of services circumstances. By migrating the Branch Gateway to the MGC automatically, a fragmented network can be unified more quickly, without the need for human intervention.

Note:

Auto fallback does not include survivability. Therefore, there is a short period during registration with the MGC during which calls are dropped and service is not available.

This problem can be minimized using the connection preserving migration feature.

• The Branch Gateway features a dynamic trap manager that enables you to ensure that the Branch Gateway sends traps directly to the currently active MGC. If the MGC fails, the dynamic trap manager ensures that traps are sent to the backup MGC.

Branch Gateway management

The Branch Gateway is managed by the Avaya Aura

®

Communication Manager

(Communication Manager). The Branch Gateway supports Avaya Aura

®

Communication

Manager (Communication Manager) release 6.x.

Avaya Aura

®

Communication Manager features

Avaya Communication Manager is an open, scalable, highly reliable, and secure telephony application. Avaya Communication Manager provides user and system management functionality, intelligent call routing, application integration and extensibility, and enterprise communications networking. Avaya Communication Manager offers over 700 features, in the following categories:

• Telephony features

• Localization

• Collaboration

• Mobility

• Messaging

• Telecommuting

• System management

• Reliability

• Security, privacy, and safety

• Hospitality

• Attendant features

• Networking


Summary of services

• Intelligent call routing

• Application programming interfaces

Avaya Aura

®

Communication Manager software applications

• Determine where to connect your telephone call based on the number you dial

• Assign numbers to local telephones

• Play dial tones, busy signals, and prerecorded voice announcements

• Allow or prohibit access to outside lines for specific telephones

• Assign telephone numbers and buttons to special features

• Exchange call switching information with older telephone switches that do not support

VoIP

For more information about Avaya Communication Manager software, see Administrator’s

Guide for Avaya Aura

®

Communication Manager.

Audio and Video features

Branch gateways also provide the following audio and video related features:

Related topics:

Call center capabilities on page 42

Emergency Transfer Relay (ETR) on page 43

Contact closure

on page 43

Fax, modem, TTY over IP on page 43

Service Level Agreement Monitor on page 43

T.38 Fax with Fallback to G.711 Pass-Through on page 44

T.38 with Error Correction Mode on page 44

List Trace and List Measurement

on page 45

V.150.1 Modem over IP with MP120 on page 45

Call center capabilities

With large announcement storage including optional compact flash, large voice trunk capacity, and 16 announcement ports for announcement record and playback, the Branch Gateway supports call center features.



May 2014

Summary of services

Emergency Transfer Relay (ETR)

The Emergency Transfer Relay (ETR) feature provides basic telephone services in the event of a power outage or a failed connection to Communication Manager. ETR services are provided on the MM714B media modules by connecting the module’s trunk port 5 to line port

4.

Contact closure

The contact closure feature is a controllable relay providing dry contacts for various applications. To implement the contact closure feature, connect an Avaya Partner Contact

Closure Adjunct box to the CCA port on the Branch Gateway chassis. The adjunct box provides two contact closures that can be operated in either a “normally closed” or “normally open” state.

The contact closures can control devices such as devices that automatically lock or unlock doors or voice recording units. The CCA port can be configured so that the connected devices can be controlled by an end device, such as a telephone. For example, a user can unlock a door by keying a sequence into a telephone keypad.

Fax, modem, TTY over IP

The Branch Gateway supports fax, modem, and TTY over IP.

Service Level Agreement Monitor

Service Level Agreement (SLA) Monitor is an integrated set of tools designed to help obtain highest end-to-end audio and video performance on a converged network. SLA Monitor communicates with agents embedded in the components of IP telephony and other sources through a web-based server application. With the data gathered by SLA Monitor through this communication, you can check the network contribution to the performance of audio and video applications.

SLA Monitor performs analysis on the following network elements:

• Correct Differentiated Services (DiffServ) issues.

• Handle rogue applications.

• Provide real-time visibility to live sessions.

The SLA Monitor agent is a component of SLA Monitor. The agent participates in the enterprise end-to

‐end monitoring and troubleshooting of various types of network problems that affect IP telephony. The SLA Monitor agent can trace packets from source to destination. The SLA


Summary of services

Monitor agent can also monitor the DiffServ markings at each hop as the packets travel through the network.

The SLA Monitor server, which is also part of SLA Monitor, collects router flow data as well as data from the SLA Monitor agents to help produce a clear picture of how the network and the media elements contribute to end-to- end quality.

G430 Branch Gateway and G450 Branch Gateway act as the SLA Monitor agents.

For more information on the SLA Monitor server and agent, see Operations Intelligence Suite

Advanced Implementation Guide for SLA Mon .

T.38 Fax with Fallback to G.711 Pass-Through

T.38 Fax with Fallback to G.711 Pass-Through feature provides the functionality to enterprise networks managed by Communication Manager to interoperate with the older Verizon networks that currently do not support T.38 Fax for fax transport. A new codec type, T.38 Fax with Fallback to G.711 Pass-Through, is added to the IP codec set for fax mode.

The operation of T.38 Fax with Fallback to G.711 Pass-Through is summarized as follows:

• The call connection is signaled for standard T.38 fax relay.

• In the event of a failure to successfully negotiate T.38 fax relay, Communication Manager issues a re-INVITE to a G.711 mode of operation.

- With PCM (G.711) codec sampling, there is an effort made to simulate a circuit-switched clear channel transport.

• The fax call is in the G.711 mode until the user disconnects.

Note:

This feature only works over SIP trunks.

For more information about the T.38 Fax Fallback to G.711 feature, see Avaya Aura

®

Communication Manager Feature Description and Implementation, 555-245-205.

T.38 with Error Correction Mode

Prior to Release 6.3, the T.38 Fax feature had no error correction capability. This is a problem for many customers and reduces the overall success rate of large fax transmissions. T.38 with

Error Correction Mode (ECM) corrects errors without retransmitting multiple pages.



May 2014

Summary of services

The operation of T.38 with ECM is summarized as follows:

• Communication Manager instructs the gateway to use ECM as part of the T.38 Fax capabilities exchange if:

- The local media gateway indicates support for this feature through capability exchange.

- IP codec set is set to T.38-standard .

- ECM is set to yes.

• Fax machines with the memory to store page data can use ECM for error-free page transmission.

- When ECM is enabled, a fax page is transmitted in a series of blocks that contain frames with packets of data.

- After receiving the data for a complete page, a receiving fax machine notifies the transmitting fax machine of any frames with errors.

- The transmitting fax machine then retransmits the specified frames.

- This process is repeated until all frames are received without errors.

- If the receiving fax machine is unable to receive an error free page, the fax transmission fails and one of the fax machines is disconnected.

For more information about the T.38 with Error Correction Mode feature, see Administering

Network Connectivity on Avaya Aura

®

Communication Manager.

List Trace and List Measurement

The List Trace and the List Measurement commands include additional performance and diagnostic information for V.150 / Modem over IP calls.

The standard List Trace command provides enhanced information for the V.150.1 call state information. The goal is to avoid dependency on Wireshark captures and other logging tools.

The List Trace command provides easy to read logging information.

The List Measurement command aggregates the usage for V.150.1 calls and provides this in the summary for G.711 equivalent call statistics.

For more information about the List Trace and List Measurement commands, see Maintenance

Commands for Avaya Aura

®

Communication Manager, Branch Gateways and Server,

03-300431.

V.150.1 Modem over IP with MP120


Summary of services

The V.150.1 Modem over IP (MoIP) feature is an industry-standard compliant V-series MoIP transport for carrying modem traffic over an IP network and for supporting interoperability with secure third-party terminal devices.

Note:

The V.150.1 feature will only be supported with an MP120.

The V.150.1 MoIP supports the following modem modulation modes:

• V.32 and V.34 up to 33.6 Kbps.

• V.90 and V.92 up to 56 Kbp.

Benefits of V.150.1 MoIP:

• Can transform analog tone events into digital control messages, so that the protocol can pass over hops.

• Can recover from loss and operate at higher speeds up to V.92 as the protocol is sent in sequenced packets.

• Can interoperate with many different vendors.

• Can eliminate extra trunking because of convergence of data, voice, and fax.

For more information about V.150.1 (MoIP), see Configuring V.150.1 on the Avaya G450 and

G430 Branch Gateway.

Additional features

H.248 Registration Source Port

You can define the source port range that the gateway uses when registering with

Communication Manager by using the following CLI commands:

•

set registration source-port-range

•

show registration source-port-range

•

set registration default source-port-range

If you do not specify a range, the gateway selects a port within the default range of 1024 to

65535.

For more information about the CLI commands, see CLI Reference Avaya Branch Gateway

G430, 03-603234.



May 2014

LAN services

Accessing diagnostic logs

With the following CLI commands, you can obtain diagnostic logs.

•

show all logs

•

show event-log

•

system show reset-log

•

show dev log file

For troubleshooting, you must send the diagnostic logs to Avaya technical support team.

For more information about accessing diagnostic logs and the CLI commands, see

Administering Avaya G430 Branch Gateway, 03-603228 and CLI Reference Avaya Branch

Gateway G430, 03-603234.

LAN services

You can use the Branch Gateway as a LAN switch. You can also integrate the Branch Gateway into an existing LAN.

Related topics:

LAN physical media on page 47

VLANs

on page 48

Rapid Spanning Tree Protocol (RSTP)

on page 48

Port mirroring on page 48

Port redundancy on page 48

Link Layer Discovery Protocol (LLDP) on page 48

LAN physical media

The Branch Gateway provides LAN services through the fixed LAN ports on the chassis front panel for the connection of external LAN switches or local data devices. The LAN ports are connected to the internal LAN switch and support HP auto-MDIX, which automatically detects and corrects the polarity of crossed cables. This results in simplified LAN installation and maintenance.


Summary of services

VLANs

In the Branch Gateway, you can configure VLANs on the fixed LAN ports.

The Branch Gateway support up to eight VLANs. The following VLAN features are supported:

• VLAN port grouping. Port VLANs can be used to group LAN ports into logical groups.

• Ingress VLAN Security. You configure a list of ingress VLANs on each port. Any packets tagged with an unlisted VLAN are dropped when received on the port.

• Class of Service (CoS) tagging. Packets are tagged with VLANs per CoS.

• Inter-VLAN routing. You can configure specific VLANs to permit access to the WAN while others can be configured to deny access to the WAN.

Rapid Spanning Tree Protocol (RSTP)

The IEEE 802.1D (STP) and IEEE 802.1w (RSTP) Spanning Tree Protocols are supported on the ETH LAN ports.

Port mirroring

The Branch Gateway supports network traffic monitoring by port mirroring. You can configure port mirroring on any LAN port. You implement port mirroring by connecting an external traffic probe device to one of the LAN ports. The probe device monitors traffic that is sent and received through other ports by copying the packets and sending them to the monitor port.

Port redundancy

You can configure port redundancy on the Branch Gateway. Port redundancy enables you to provide both a primary link and a backup link to an important resource.

Link Layer Discovery Protocol (LLDP)

LLDP simplifies network troubleshooting and enhances the ability of network management tools to discover and maintain accurate network topologies in multi-vendor environments.

LLDP defines a set of advertisement messages (TLVs), a protocol for transmitting the TLVs,



May 2014

WAN services and a method for storing the information contained in the received TLVs. This allows stations attached to a LAN to advertise information about the system and about the station’s point of attachment to the LAN to other stations attached to the same LAN. These can be reported to the management station via SNMP MIBs.

LLDP is supported on the front panel ETH LAN ports.

WAN services

The Branch Gateway has an internal router and provides direct access to outside WAN lines.

You can use the Branch Gateway as the endpoint device for a WAN line. You can also use the Branch Gateway as the router for a WAN line with an external endpoint device.

Note:

Certain WAN services are supported on IPv4 only.

Related topics:

WAN physical media

on page 49

WAN features

on page 50

Data and Routing features

on page 51

WAN physical media

You can also use the fixed ETH WAN Fast Ethernet port as a WAN endpoint by configuring the port’s interface for PPPoE encapsulation (ADSL modem) or Ethernet-DHCP/static IP

(cable modem).

To use the Branch Gateway as a router, connect the external endpoint device to the ETH WAN port on the Branch Gateway front panel using a standard network cable.

Related topics:

WAN line support

on page 49

WAN line support

The Branch Gateway supports the following types of data WAN line:

• PPPoE (ADSL modem)

• Ethernet-DHCP/static IP (cable modem)


Summary of services

WAN features

The Branch Gateway supports the following WAN features:

Note:

These features are only available on IPv4.

• Traffic shaping. The traffic shaping function estimates the parameters of the incoming traffic and takes action if it measures traffic exceeding agreed parameters. The action could be to drop the packets or mark them as being high drop priority.

• The Branch Gateway has the ability to map several PPP sessions to a single E1/T1 interface.

• PPPoE

• Backup functionality supported between any type of Layer 2 interface except for the VLAN interface

• Dynamic Call Admission Control (CAC) for Fast Ethernet and GRE tunnel interfaces.

Dynamic CAC provides enhanced control over WAN bandwidth. When Dynamic CAC is enabled on an interface, the Branch Gateway informs the MGC of the actual bandwidth of the interface and tells the MGC to block calls when the bandwidth is exhausted.

• Quality of Service (QoS). The Branch Gateway uses Weighted Fair VoIP Queuing

(WFVQ) as the default queuing mode for WAN interfaces. WFVQ combines weighted fair queuing (WFQ) for data streams and priority VoIP queuing to provide the real-time response time that is required for VoIP. The Branch Gateway also supports the VoIP

Queue and Priority Queue legacy queuing methods.

• Weighted Random Early Detection (WRED). The Branch Gateway uses WRED on its ingress and egress queues to improve the performance of the network when overloaded.

The purpose of WRED is to indicate to transmitting hosts to reduce their transmission speed when the ingress Branch Gateway queues are congested.

• Policy. Each interface on the Branch Gateway can have four active policy lists:

- Ingress Access Control List

- Ingress QoS List

- Egress Access Control List

- Egress QoS List

Access control lists define which packets should be forwarded or denied access to the network. QoS lists change the DSCP and 802.1p priority of routed packets according to the packet characteristics.

• Policy-based routing. The Branch Gateway features policy-based routing, which uses a policy list structure to implement a routing scheme based on traffic source, destination, type, and other characteristics. You can use policy-based routing lists (PBR lists) to determine the routing of packets that match the rules defined in the list. Common applications include separate routing for voice and data traffic, routing traffic originating



May 2014

WAN services from different sets of users through different Internet connections (Internet Service

Providers), and defining backup routes for defined classes of traffic.

• RTP Header Compression. The Branch Gateway saves up to 60% of the bandwidth necessary using RTP compression. It also enhances the efficiency of voice transmission over the network by compressing the headers of Real Time Protocol (RTP) packets, thereby minimizing the overhead and the delays involved in RTP implementation.

• TCP Header Compression. The Branch Gateway uses Transmission Control Protocol

(TCP) header compression to reduce the amount of bandwidth needed for non-voice data.

TCP header compression can be applied either as part of RTP Header Compression via

IPCH, or using the Van Jacobson method defined in RFC 1144.

• Inter-Gateway Alternate Routing (IGAR). The Branch Gateway uses IGAR as a means to use the PSTN as an alternative to the WAN interface under certain definable conditions.

In providing an alternate routing mechanism, IGAR preserves the internal makeup of the call so that the call can be successfully terminated to its original internal destination.

Data and Routing features

The Branch Gateway has an internal router. You can configure the following routing features on the router:

Note:

Features labelled * are only available on IPv4.

• Interfaces*

• Routing table

• VPN

• GRE tunneling*

• DHCP and BOOTP relay*

• DHCP server

• DHCP client*

• Broadcast relay

• ARP table

• ICMP errors

• RIP*

• OSPF*

• Route redistribution

• VRRP*

• Fragmentation

• Static routes


Summary of services

• Policy-based routing*

• Distribution lists

• Dynamic IP addresses

• DNS resolver

• Unnumbered IP interfaces

• SYN cookies

• Keepalive packets

• Object tracking

• Backup interfaces



May 2014

Chapter 5: Management, Security, Alarms and Troubleshooting

Management, Security, Alarms and Troubleshooting

Management applications

Use any of the following applications to manage the Branch Gateway:

• Command Line Interface

• Branch Gateway Manager and Embedded Web Manager

• Avaya Integrated Management

Related topics:

Branch Gateway Command Line Interface (CLI)

on page 53

Avaya Branch Gateway Manager and Embedded Web Manager on page 54

Avaya Integrated Management

on page 54

Branch Gateway Command Line Interface (CLI)

You can use the Branch Gateway CLI to configure the Branch Gateway and its media modules.

The CLI is a textual command prompt interface. It is similar to the CLI of many other network devices.

You can access the CLI with any of the following:

Note:

Telnet and the Services port are supported on IPv4 only.

• Telnet through the Services port.

• Telnet through the network

• Telnet through dialup, using a dialup PPP network connection


Management, Security, Alarms and Troubleshooting

Note:

Telnet is disabled by default on the Branch Gateway

• SSH (Secure Shell), which enables you to establish a secure remote session over the network, Services port, or dial in modem (PPP).

• SSH is enabled by default.

For information about each command in the CLI, see Avaya Branch Gateway G430 CLI

Reference.

For information about how to use the CLI to perform specific configuration tasks, see

Administration for the Avaya Branch Gateway G430.

Avaya Branch Gateway Manager and Embedded Web Manager

Note:

Avaya management tools are supported in IPv4 only.

The Avaya Branch Gateway Manager is a web-enabled graphical administration tool for configuring a single Branch Gateway device. You can use the Gxxx Manager to configure the

Branch Gateway chassis and media modules. You can also use it for status monitoring and troubleshooting. You can open Avaya Branch Gateway Manager in one of the following ways:

• From Avaya Integrated Management software

• From a web browser on a computer on the same network as the device

For information about Avaya Branch Gateway Manager, see the Avaya Integrated

Management Manager User Guide .

Avaya Integrated Management

Avaya Integrated Management offers a comprehensive set of web-based network and system management solutions that support Avaya converged voice solutions. You can use Avaya

Integrated Management to monitor SNMP traps on the Branch Gateway. You can also use

Avaya Integrated Management to access Avaya Gxxx Manager.



May 2014


Management access security features

The Branch Gateway features the following management security mechanisms:

• A basic authentication mechanism in which users are assigned passwords and privilege levels

• Support for user authentication provided by an external RADIUS server

• SNMPv3 user authentication

• Secure data transfer via SSH and SCP with user authentication

• ASG authentication for remote service logins. ASG is a challenge-response authentication method that is more secure than password authentication and does not require a static password.

Network security features

The Branch Gateway provides the following network security features:

• Private secure connections can be configured between the Branch Gateway and a remote peer, using VPN (Virtual Private Network). VPN at the IP level is deployed using a standards-based set of protocols defined by the IETF called IPSec. IPSec provides privacy, integrity, and authenticity to information transferred across IP networks.

• Protection against DoS (Denial of Service) attacks via:

- MSS notifications (IPv4 only). The Branch Gateway identifies predefined or customdefined traffic patterns as suspected DoS attacks and generates SNMP notifications, referred to as Managed Security Services (MSS) notifications. MSS notifications are intercepted and, if certain conditions are met, may be forwarded to the Avaya

Security Operations Center (SOC) as INADS alarms. The SOC is an Avaya service group that handles DoS alerts, responding as necessary to any DoS attack or related security issue.

- SYN cookies, which protect against a well-known TCP/IP attack in which a malicious attacker targets a vulnerable device and effectively prevents it from establishing new

TCP connections.

Alarms and troubleshooting features

The Branch Gateway has extensive features for error detection, alarms, and troubleshooting.

Detailed diagnostic information and troubleshooting are provided by software-based solutions accessible by laptops in the field or remotely from an administrator’s computer. Administration



for the Avaya Branch Gateway G430 provides a comprehensive guide to configuring and using these solutions.

Related topics:

Front panel LEDs

on page 56

Automatic error detection

on page 56

SNMP

on page 56

Packet sniffing

on page 56

VoIP debugging using RTP-MIB on page 57

Front panel LEDs

LEDs on the front panel of the Branch Gateway and their media modules give a quick overall understanding of the health of the system and subsystems. When alarms or problems occur,

LEDs indicate that a technician’s attention is needed.

Automatic error detection

During normal operations, software or firmware automatically detects and attempts to fix or circumvent error conditions. Errors are detected in two ways:

• Firmware on a system component during ongoing operations

• A “periodic test” or a “scheduled test” started by software

A technician can run more comprehensive tests on demand.

SNMP

Note:

SNMP is supported on IPv4 only.

The Branch Gateway reports alarms using SNMP traps. The Branch Gateway fully supports

SNMP versions SNMPv1 and SNMPv3.

Packet sniffing

The Branch Gateway features packet sniffing on IPv4 and IPv6. All IP and ARP packets that pass through the Branch Gateway are recorded. The recorded packets are stored in a file that



May 2014

Management, Security, Alarms and Troubleshooting can be uploaded either to the S8xxx server or to a PC and read by Ethereal for troubleshooting purposes.

VoIP debugging using RTP-MIB

The Branch Gateway includes the RTP-MIB feature for debugging QoS-related problems across the VoIP network without any dedicated hardware. During each RTP stream, counters representing various QoS metrics increment whenever configured thresholds for the metrics are exceeded. A limited history of the QoS metric statistics is stored on the Branch Gateway for active and terminated RTP streams. Statistics can be displayed via the Branch Gateway

CLI. In addition, the Branch Gateway can be configured to send SNMP traps to the SNMP trap manager on the S8xxx server at the termination of each RTP stream that has QoS problems.

The traps are converted to syslog messages and stored for viewing in the messages file on the S8xxx server hard disk.





May 2014

Chapter 6: Branch Gateway capacities

Branch Gateway capacities

Maximum Branch Gateway G430 capacities

Table 5: Branch Gateway G430 capacities

Description

Maximum number of G430s controlled by an S8500 or

S8700-series server

250

Capacity

Maximum number of G430s controlled by an S8300 server housed in another

Branch Gateway G430 (or

G450 or G700) .

50

Maximum total number of telephones supported by the

G430

150

Maximum number of IP telephones per Branch

Gateway G430

Maximum number of analog phones per Branch Gateway

G430

150

56

104 for a G430 with one EM200

152 for a G430 with two EM200s

Maximum number of DCP phones per Branch Gateway

G430

56

104 for a G430 with one EM200


Comments

This number also applies if the same external server controls a combination of Avaya Branch

Gateways G430, G450, G350,

G250, and G700.

This number also applies if the same external server controls a combination of Avaya Branch

Gateways G430, G450, G350,

G250, and G700.

This number can be higher, depending on traffic needs.

This number can be higher, depending on traffic needs.


Branch Gateway capacities

Description

Maximum number of BRI endpoints per Branch

Gateway G430

Capacity

48

80 for a G430 with one

EM200


Simultaneous two-way conversations with TDM transcoding from IP phone to legacy telephone or trunk.

120

120 Simultaneous two-way conversations with TDM transcoding from TDM phones to IP phones

Maximum number of BRI trunks

Maximum number of PSTN trunks

Miscellaneous

Simultaneous fax transmissions

24

40 for a G430 with one

EM200

56 for a G430 with two

EM200s

4 T1

3 E1

120

Touch-tone recognition

(TTR)

Tone Generation

Announcements ports

32 unlimited

15 ports for playback

1 for record

Comments

Maximum of 64 when the BRI modules are MM721

Maximum of 32 when the BRI modules are MM721

7 E1/T1 can be supported in tandem mode

Fax transmissions using VoIP resources

S8300 maximum capacities

Table 6: S8300 capacities

Item

Number of Users per S8300

Number of Trunks per S8300

Total Endpoints (Trunks and Users) per S8300

MGs per S8300

Quantity Supported

450

450

900

50



May 2014


Item

LSPs per S8300

MGs per LSP

Announcement Sources per S8300

Busy Hour Calls (Maximum, non-call center)

Locations

Quantity Supported

49

50

50

10,000

50

For a complete list of capacities, see Avaya Aura

®

Table.

Communication Manager System Capacities





May 2014

Chapter 7: Supported Avaya telephones

Supported Avaya telephones

Avaya Branch Gateways support various Avaya telephones, including IP, DCP digital, and analog telephones.

Avaya IP telephones

The Branch Gateway G430 supports all Avaya IP telephones, including the Avaya 1602, 1608,

1616 H.323 and 96xx IP phones, except for the Avaya 4630 IP Screenphone.

Avaya DCP digital telephones

The DCP media modules supported by the Branch Gateway support the following DCP telephones:

• Avaya 1408 DCP Telephone


• Avaya 2402 Digital Telephone



• Avaya 2490 DCP Speakphone

• Avaya 6402 and Avaya 6402D Digital Telephones

• Avaya 6408+ and Avaya 6408D+ Digital Telephones

• Avaya 6416D+ and 6416D+M Digital Telephone

• Avaya 6424D+ and 6424D+M Digital Telephone


• Avaya 8410 and 8410D Digital Telephones

• Avaya 8434DX Digital Telephone


Supported Avaya telephones

• IP softphones that are configured as “Road Warrior” and “Take Over” a DCP station

• Definity Extender – ISDN single endpoint 302 series Attendant Console (302D)

• Avaya 603E Call Master III

• Avaya 606B1 Call Master VI



Avaya analog telephones

The Branch Gateway supports the following Avaya analog telephones:

• Avaya 6210 Analog Telephone






• Avaya 2500 analog Telephone



May 2014

Chapter 8: Technical specifications

Technical specifications

The Branch Gateway technical specifications include physical dimensions and tolerances, power cord specifications, and media module specifications.

Specifications

The following table of technical specifications provides detailed information on the physical dimensions and tolerances.

Table 7: Avaya Branch Gateway G430 specifications

Description

Height

Width

Depth

Weight of empty chassis

Weight of chassis with basic configuration

Ambient working temperature

Storage temperature

Operation altitude

Front clearance

Rear clearance

Humidity

Voltage

Power rating

Max current

Value

2.62 in. (66.5 mm)

19 in. (482.6 mm)

12.8 in. (325 mm) under 11 pounds (under 5 Kg) between 13 and 14 pounds (between 6 and 7 Kg)

32° to 104°F (0° to 40°C)

–40°F to 150°F (–40°C to 66°C) up to 10,000 ft. (3000 m)

12 in. (30 cm)

18 in. (45 cm)

10-90% relative humidity, non-condensing

90V to 264V AC, 48 to 63 Hz

800 BTU/h (234 W)

2.4 A


Technical specifications

EM200 specifications

The following table of technical specifications provides detailed information on the physical dimensions and tolerances of the EM200 expansion module:

Table 8: EM200 specifications

Description

Height

Width

Depth

Weight of empty chassis

Weight of chassis with media modules and brackets

Ambient working temperature

Operation altitude

Front Clearance

Rear Clearance

Humidity

Power rating

BTU

Max current

Value

2.62 in. (66.5 mm)

19 in. (482.6 mm)

12.8 in. (325 mm) under 11 pounds (under 5 Kg)

13 pounds (6 kg)

32° to 104°F (0° to 40°C) up to 10,000 ft. (3000 m)

12 in. (30 cm)

18 in. (45 cm)

10 to 90% relative humidity, non-condensing

90V to 264V AC, 48 to 63 Hz

430 BTU/h

1.3 A

Power cord specifications

For North America

The cord set must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd wire ground), type

SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector rated 10A, 250V.

The other end is to be terminated to either a NEMA 5-15P attachment plug for nominal 125V applications or a NEMA 6-15P attachment plug for nominal 250V applications.

For outside North America

The cord must be VDE Certified or Harmonized (HAR), rated 250V, 3-conductor (3rd wire ground), 1.0 mm

2

minimum conductor size. The cord is to be terminated at one end to a VDE

Certified/CE Marked IEC 60320, sheet C13 type connector rated 10A, 250V and the other end to a 3-conductor grounding type attachment plug rated at a minimum of 10A, 250V and a



May 2014

Media module specifications configuration specific for the region/country in which it will be used. The attachment plug must bear the safety agency certifications mark(s) for the region/country of installation.

Media module specifications

Table 9: Media modules

Description

Height

Width

Depth

Weight

Value

0.79 in. (2 cm)

6.69 in. (17 cm)

12.20 in. (31 cm)

0.7-0.9 lb. (300-400 grams)


Technical specifications



May 2014

Index

Numerics

802.1x .........................................................................

55

A

Access ........................................................................

47

Administration for the Avaya Branch Gateway G430s .

9

ADVD Settings Editor .................................................

24

Alarms and troubleshooting ........................................

55

analog telephones ......................................................

64

ASB button .................................................................

18

Automatic error detection ...........................................

56

Avaya Aura Communication Manager (Avaya Aura CM)

.......................................................................

13

server integration .................................................

13

Avaya Aura Communication Manager (CM) .........

41

,

42

feature categories ................................................

41

software uses .......................................................

42

Avaya courses ............................................................

11

Avaya G250/G350/G450 Manager User Guide ...........

9

Avaya G430 CLI Reference .........................................

9

Avaya G430 Manager User Guide ...............................

9

Avaya IM ....................................................................

54

Avaya Integrated Management ..................................

54

Avaya Softphone software .........................................

38

Avaya telephones, which supported ...........................

63

B

Branch Gateway .........................................................

43

Agent ....................................................................

43

Branch Gateway services ....................

36

,

37

,

39

,

42

,

57

audio related feature ............................................

42

MGC (Media Gateway Controller) ........................

39

overview ...............................................................

36

physical media .....................................................

37

Voice over IP (VoIP) ............................................

57

voice related features ...........................................

42

VoIP (Voice over IP) ............................................

37

Buttons .......................................................................

18

ASB ......................................................................

18

RST ......................................................................

18

Calls, preserving .........................................................

40

CCA port .....................................................................

18

CDR tools ...................................................................

24

CLI documentation .......................................................

9

CM, see Avaya Aura Communication Manager .........

13

Components ...............................................................

21

optional ................................................................

21

Computer, as a telephone ..........................................

38

Contact Closure ..........................................................

43

Continuous telephone services ..................................

40

D

DHCP server ..............................................................

24

Diagnostic tools ....................................................

48

,

56

automatic error detection .....................................

56

DP ........................................................................

48

SNMP ...................................................................

56

Differentiated Services ...............................................

43

SLA ......................................................................

43

document changes .......................................................

9

Documentation .............................................................

9

Administration for the Avaya Branch Gateway

G430s .......................................................

9

Avaya G430 CLI Reference ...................................

9

Avaya G430 Manager User Guide .........................

9

Installing and Upgrading the Avaya Branch Gateway

G430 .........................................................

9

Maintenance Alarms for Avaya Aura Communication

Manager, Branch Gateways and Servers .

9

Maintenance Commands for Avaya Aura

Communication Manager, Branch

Gateways and Servers .............................

9

Maintenance Procedures for Avaya Aura



9

Quick Start for Hardware Installation for the Avaya

Branch Gateway G430 .............................

9

DoS attacks ................................................................

55

Dry contacts ...............................................................

43

Dynamic trap manager ...............................................

40

C

Call center features ....................................................

42

E

ECC (External Call Controller) ...................................

39

ELS (Enhanced Local Survivability) ...........................

40

EM200 ........................................................................

19


I

front panel ............................................................

19

physical description ..............................................

19

Embedded Web Manager ..........................................

54

Emergency Transfer Relay, see ETR .........................

43

Enhanced Local Survivability (ELS) ...........................

13

Error Correction Mode ................................................

44

ETH LAN port .............................................................

18

ETH WAN port ............................................................

18

ETR (Emergency Transfer Relay) ..............................

43

feature ..................................................................

43

External Call Controller (ECC) ...................................

13

IP Phone file server ....................................................

24

IP Phone firmware management ................................

24

IP Phone Push Server ................................................

24

IP Phone Settings Editor ............................................

24

IP telephones .............................................................

63

IPv6 ............................................................................

35

IPv6 DHCP server ......................................................

24

F

Fax over IP .................................................................

43

Features .....................................................................

15

Firewall Rules .............................................................

24

Fixed LAN port ...........................................................

47

Front panel ......................................................

18

,

19

,

56

EM200 ..................................................................

19

LEDs ....................................................................

56

G

G250 ...........................................................................

14

analog model, see G250-Analog .........................

14

BRI model, see G250-BRI ...................................

14

DCP model, see G250-DCP ................................

14

DS1 model, see G250-DS1 .................................

14

G250-BRI ...................................................................

14

G250-DCP ..................................................................

14

G250-DS1 ..................................................................

14

G350 ...........................................................................

14

G430 .....................................................................

14

,

59

gateway capacities ...............................................

59

G450 ...........................................................................

14

Gateway capacities ....................................................

59

G430 ....................................................................

59

H

H.248 ..........................................................................

46

ICC (Internal Call Controller) ......................................

39

IEEE 802.1D ...............................................................

48

IEEE 802.1w ...............................................................

48


G430 ...............................................................

9

Internal Call Controller (ICC) ......................................

13

L

LAN ............................................................................

18

ETH LAN port .......................................................

18

LAN ports ...................................................................

47

fixed .....................................................................

47

switched ...............................................................

47

LAN services .........................................................

47

,

48

overview ...............................................................

47

physical media .....................................................

47

port redundancy ...................................................

48

RSTP (Rapid Spanning Tree Protocol) ................

48

VLANs configuration ............................................

48

LEDs ...........................................................................

56

legal notice ...................................................................

2

List Measurement .......................................................

45

List Trace ....................................................................

45

LLDP (Link Layer Discovery Protocol) .......................

48

log file generation .......................................................

47

Log viewer ..................................................................

24

M

Management .........................................................

53

,

55

access permissions ..............................................

55

alarms and troubleshooting ..................................

55

applications ..........................................................

53

Management tools ................................................

53

,

54

Command Line Interface (CLI) .............................

53

Device manager ...................................................

54

Embedded Web Manager ....................................

54

integrated management .......................................

54

Manuals ........................................................................

9


G430s .......................................................

9


G450s .......................................................

9

Avaya G430 CLI Reference ...................................

9

Avaya G430 Manager User Guide .........................

9


G430 .........................................................

9

Maintenance Alarms for Avaya Aura Communication

Manager, Branch Gateways and Servers .

9


Maintenance Commands for Avaya Aura



9

Maintenance Procedures for Avaya Aura



9


Branch Gateway G430 .............................

9

Media Gateway Controllers, see MGC .......................

39

Media modules .....................................

21

,

25

–

31

,

33

,

34

analog .............................................................

26

–

28

BRI .................................................................

31

,

33

capacity ................................................................

34

DCP ................................................................

29

,

30

E1/T1 ...................................................................

30

MM710 .................................................................

30

MM710 features ...................................................

30

MM710B ...............................................................

30

MM710B features .................................................

30

MM711 .................................................................

26

MM712 .................................................................

29

MM714 .................................................................

27

MM714B ...............................................................

28

MM716 .................................................................

28

MM717 .................................................................

30

MM720 .................................................................

31

MM722 .................................................................

33

permitted slots ......................................................

33

slot configuration ..................................................

33

supported .............................................................

21

telephony .............................................................

25

MGC (Media Gateway Controller) ...................

13

,

39

,

41

8xxx server management .....................................

41

backup options .....................................................

13

location .................................................................

13

modes ..................................................................

13

overview ...............................................................

39

primary .................................................................

13

supported models ................................................

13

supported servers ................................................

39

MM710 media modules ..............................................

30

MM710B media modules ............................................

30

MM711 media module ................................................

26

MM712 media module ................................................

29

MM714 media module ................................................

27

MM714B media module .............................................

28

MM716 media module ................................................

28

MM717 media module ................................................

30

MM720 media module ................................................

31

MM721 ..................................................................

31

,

33

administration modes ...........................................

31

front panel ............................................................

33

overview ...............................................................

31

MM722 media module ................................................

33

Modem over IP ...........................................................

43

MP120 ........................................................................

46

MSS notifications ........................................................

55

MyPhone ....................................................................

25

MyPhone Admin .........................................................

25

MyPhone Feature Buttons ..........................................

25

MyPhone User Guide .................................................

25

O

Optional components .................................................

21

P

Packet sniffing ............................................................

56

Physical description ..............................................

18

,

19

EM200 ..................................................................

19

Port mirroring ..............................................................

48

Port redundancy .........................................................

48

Port registration ..........................................................

46

Ports ................................................................

18

,

38

,

47

CCA .....................................................................

18

ETH LAN ..............................................................

18

ETH WAN ............................................................

18

for telephone lines ................................................

38

for telephones ......................................................

38

LAN ......................................................................

47

SERVICES ...........................................................

18

USB ......................................................................

18

Power cord specifications ...........................................

66

Primary MGC ..............................................................

13

Q


Branch Gateway G430 ....................................

9

Quick Start for Hardware Installation for the Avaya G350

Branch Gateway ..............................................

9

R

RADIUS server ...........................................................

55

Routing features .........................................................

51

RST button .................................................................

18

RSTP (Rapid Spanning Tree Protocol) ......................

48

RTP-MIB .....................................................................

57


S

S8300 .........................................................................

60

capacities .............................................................

60

S8300 server ..............................................................

13

as SRS .................................................................

13

in standalone deployment ....................................

13

supported .............................................................

13

S8300D ......................................................................

23

configuration ........................................................

23

S8300D Server .....................................................

22

,

23

components .........................................................

22

software ...............................................................

23

S8400 server ..............................................................

13

S8500 server ..............................................................

13

S8510 server ..............................................................

13

S8710 server ..............................................................

13

S8720 server ..............................................................

13

S8730 server ..............................................................

13

SCP ............................................................................

55

Security features ........................................................

55

Services ..........................................................

35

,

36

,

47

Branch Gateway ..................................................

36

LAN ......................................................................

47

summary ..............................................................

35

telephone .............................................................

36

SERVICES port ..........................................................

18

SLA (Service Level Agreement Monitor) ....................

43

SNMP ...................................................................

55

–

57

Softphone software ....................................................

38

Software Version ........................................................

24

specifications ..............................................................

65

Specifications .............................................................

65

SRS (Survivable Remote Server) .........................

13

,

40

SSH ............................................................................

55

Standalone deployment ..............................................

13

Standard Local Survivability (SLS) .............................

13

STP (Spanning Tree Protocol) ...................................

48

support .......................................................................

11

contact .................................................................

11

Survivability ...........................................................

13

,

40

Switched LAN ports ....................................................

47

SYN cookies ...............................................................

55

System Message ........................................................

25

ports for different types ........................................

38

services ................................................................

36

supported .............................................................

38

which supported ...................................................

63

telephones, analog .....................................................

64

telephones, IP ............................................................

63

training ........................................................................

11

Troubleshooting ....................................................

48

,

56

automatic error detection .....................................

56

front panel LEDs ..................................................

56

LDP ......................................................................

48

packet sniffing ......................................................

56

SNMP ...................................................................

56

Troubleshooting and alarms .......................................

55

TTY over IP ................................................................

43

U

USB port .....................................................................

18

Utility Admin ...............................................................

24

Utility services ............................................................

24

overview ...............................................................

24

Utility Services applications ..................................

24

,

25

MyPhone ..............................................................

25

MyPhone Admin ...................................................

25

Utility Admin .........................................................

24

V

V.150.1 Modem over IP ..............................................

46

videos .........................................................................

11

VLAN features ............................................................

48

Voice over IP (VoIP) services ...............................

37

,

57

Voice software ............................................................

38

VOIP modules ............................................................

29

MP10 ....................................................................

29

MP120 ..................................................................

29

MP20 ....................................................................

29

MP80 ....................................................................

29

VPN ............................................................................

55

W

T

T.38 ............................................................................

44

Technical specifications .............................................

65

Telephones .....................................................

36

,

38

,

63

outside lines .........................................................

38

WAN ...........................................................................

18

ETH WAN port .....................................................

18

WAN features .............................................................

50

access control lists ...............................................

50

inter-gateway alternate routing (IGAR) ................

50

policy based routing .............................................

50

RTP header compression ....................................

50


TCP header compression ....................................

50

WAN services .......................................................

49

,

51

overview ...............................................................

49

physical media .....................................................

49

routing features ....................................................

51

Warranty .....................................................................

12

WML Links ..................................................................

25


No results