iNEXIO

iNEXIO
iNEXIO
User Guide for Infrared Touch Driver
1
Note : This information in this document is subject to change without notice.
Contents
Chapter 1
Introduction
3
Chapter 2
Installing iNexio
5
Uninstalling iNexio
7
Control Panel
7
Chapter 3
Nexio Device Setting
& Information
8
Chapter 4
Setup
10
Multipoint Touch
12
Option/Tools
13
Popup Control
19
Popup Control Menu
20
Multi Monitor Display
21
2
Chapter 1
Introduction
iNexio Touch Driver is the software for the Infrared Touch Screen of Nexio Co., Ltd. It provides full
touch screen functionality for all software applications running under Microsoft Windows.
This version of iNexio Touch Driver software for your Nexio touch screen supports Serial, USB
controllers.
Once you install iNexio Touch Driver, you can select, launch, and drag objects using the touch screen.
To make a selection, you simply touch the screen. It’s that easy and natural – just touch to select.
iNexio Touch Driver Includes :
■ iNexio Touch Driver
iNexio Touch Driver is the software that the system uses to communicate with the touch screen. The
driver enables you to use the iNexio touch screen with applications runing in Windows environments.
You can run Windows programs and use touch (finger or pen) input without any program modifications.
- Touch screen Control Panel
You can use the touch screen control panel to set your preferences for the touch screen.
For example, you can define the following preferences:
• Whether the touch action occurs when you touch the screen or when you lift your finger
(or pen) off the screen.
• Whether you hear a sound when you touch the screen
• How fast you need to touch to produce a double-click
You can also use the control panel to calibrate the touch screen, to stabilize the cursor, and define
where the cursor appears relative to your touch (an offset)
■ Touch Click Control
Touch Click Control has the same function of Windows right mouse button. Any touch on the monitor
on which Right Button is running will produce a right button click.
■ Uninstalling iNexio Touch Driver
The Uninstall utility automatically delets all iNexio Touch Driver components from your computer
and removes all iNexio entries from the system files.
■ mPopup Control
mPopup Control runs Disable Touch Area Limit & Disable Mouse Action function.
3
Chapter 2
Installing
Uninstalling
Control Panel
4
Installing iNexio Touch Driver
Software Installation
(Driver & Configuration Utility)
Connecting Hardware
(USB or Serial Cable to PC)
1.
Insert the Driver CD-ROM into your PC.
2.
Browse to the folder and double-click the “Setup.exe” file.
3.
Follow the onscreen instructions to begin the installation.
4.
Connect Touch screen monitor cable(USB or Serial) into your PC
5
Connecting Hardware
(USB/Serial Cable to PC)
Software Installation
(Driver & Configuration Utility)
1.
Upon your system’s reboot, the ‘Found New Hardware Wizard’ appears.
Select [Advanced] installation - Click [Next].
2
Follow the onscreen instructions to begin the installation.
3.
Double-click “Setup.exe” file in the install CD as described on the previous page.
6
Uninstalling iNexio Touch Driver
1.
Click on Start - Programs - iNexio - Uninstall iNexio Touch Driver
2.
Select [Remove] and click [Next]
Control Panel
1.
Double-click the ‘iNexio Driver” icon on the screen or Click on Start
- Programs - iNexio - iNexio Touch Driver
7
Chapter 3
Nexio Device Setting & Information
Shows the Port No., Firmware Version, Device name, Comm. Device
8
Chapter 4
Control Panel
Setup
Multipoint Touch
Option/Tools
Popup Control
Popup Control Menu
Multi Monitor Display
9
Setup
1)
2)
3)
4)
5)
6)
1) Sound effect
No Sound
No Sound
Touch down
Sound occurs when you touch down
Lift up
Sound occurs when you lift up
Touch down Mode
Touchdown Mode enables you to create an immediate button action as soon as you
touch the screen. In Touchdown Mode, you cause a button down at the cursor location, with a
short pause and then a button up. You can leave your finger on the screen but only a single
touch is registered until you lift your finger off the screen and touch down again.
Touching the screen is equivalent to pressing and releasing the mouse button. The action
occurs as soon as you touch the screen. This mode is best for button based applications(like a
calculator)
Lift up Mode
Lift up Mode enables you to position the cursor where you want before creating a
button action. In Lift up Mode, the cursor will follow your finger for more accurate touch.
When you want to select an item, lifting your finger off the screen will cause a button down,
short pause, and then a button up to occur.
Touching the screen is equivalent to moving the mouse position. The button
down/button up action occurs when you remove your finger from the screen. This mode is
useful for applications requiring greater accuracy because it lets you carefully position the
cursor prior to acting on it.
10
2) Sound Tone/Sound
The frequency (Tone) and the Duration of the sound can be adjusted
by moving the appropriate slider with the touch screen or mouse, or
by using the keyboard arrow keys.
3) Double Click Speed
Define how fast you need to touch and the space in which you must
touch in order to produce a double-click.
& Area
4) Double Click Test
Enables you to test the double-click speed and area.
5) Touch Action
Drawing Mode
Drawing mode is most useful for draw, paint, illustrator, and
graphics applications. In Drawing Mode, a touch is equivalent to
pressing and holding down the mouse button. This is considered the
easiest mode to use with immediate reaction to touch. Lifting off is
equivalent to releasing the mouse button.
Touch Only Mode
Drawing or dragging is not supported in this mode.
6) Touch Rotation
In case of putting the touch screen not properly on the display(e.g. upside
down), you can select proper degree to adjust the touch(cursor) position.
11
Multipoint Touch
3) - 1)
1)
2)
3)
1) Enable Mouse Action As a basic option, touch action can be recognized on all windows program. By
disabling this option, the touch is no longer recognized on all windows program.
You can also use the Popup Control Menu(Refer to the page 20) to enable the
function again.
2) First Touch Only
As a basic option, the first touch point is not disturbed by second touch while
the first touch object remains on the touch screen.
3) Enable Multi-Touch
Limit
The size of a touch object can be adjusted in connection with 3) - 1) X Y Limit
Allow XY range : Recognized within the size of X Y limit
Limit XY range : Recognized without the size of X Y limit
3) – 1)
iNexio Touch Driver has the area recognition function on Single & Multi point touch. With the
X-Width Limit / Y-Width Limit function, the size of a touch object can be adjusted on X Y limit
in connection with 3) Enable Multi-Touch Limit.
Touch Pressure Depth : Will be removed while updating(User not allowed to use).
Touch Velocity :
Will be removed while updating(User not allowed to use).
Enable touch point
error correction
Velocity :
Will be removed while updating(User not allowed to use)
12
Option/Tools
5) – 1)
1)
2)
5) – 2)
3)
3)-1)
3)-2)
4)
1) Right Button
Right Button tool allows a Windows right mouse button
simulation on the touch screen. A representation of a typical
two-button mouse is displayed in a small window on the
desktop, when this application is run. The Right Button
shows the left button shaded, indicating that the left button
is active. Any touch on the desktop or an application will
produce a left button click consistent with the Button settings
in the Control Panel.
A touch in the Right Button will change the shading to show
the right mouse button active. Now any touch on this monitor
on which Right Button is running will produce a right button
click.
13
2) Touch Calibration
The calibration process aligns the touch screen with the
underlying video. Specifically, calibration defines the dimensions
of the active area of the touch screen and locates the center of the
touch screen. If the screen is not calibrated, the active area of the
touch screen may not be aligned properly or may be
unnecessarily small in size.
Once calibrated, the information is saved by the touch screen for
each video resolution. Therefore, you only need to recalibrate the
touch screen the first time you change to a particular video
resolution.
Calibration process is running automatically based on the
resolution. For more accuracy, follow the below instruction and
also refer to the 5)-1), 2) Fine Coordinate Correction function on
page 13.
1.
Click [Calibration] button. Calibration targets appear on the screen.
A circle guides you through the calibration process pointing to the
appropriate target.
2.
Touch the touch screen and position your fingertip to the center of
the circle
3.
Repeat for additional calibration target(s).
4.
If you accidentally touched the screen in the wrong place during
calibration, you will distort the touch screen calibration. Test to
make sure you are satisfied with the calibration results.
14
3) Drawing Test Tool
3) – 1) Single - Point
After selecting the Single – Point, you can see the below picture on
clicking the Touch Test button and test with your finger on the touch
screen (This program is for Drawing Test purpose and be available in
Drawing Mode only).
3) – 2) Multi - Point
After selecting the Multi-Point, you can see the below picture on clicking
the Touch Test button and test with your fingers or palms simultaneously
on the touch screen.
The below pictures show simple contents developed by Nexio applying
Multi-Point Touch. Upon touch, the part of area cognition and multi-points
are shown in red circle. You can test with the 3) -1) option of object size
limit on page 12.
15
* Additional Information on Multi – Point Touch Test
As the above picture shows on multi-point touch test, when touch points are at the same
axis of X or Y coordinates, the second touch point is not shown. This is purposely
programmed not to recognize the second touch point in this contents. But as the below
picture shows on 4) Multitouch View contents on page 13, the second touch is shown
even at the same axis of X or Y coordinates.
16
4) Multitouch View
The below pictures are shown when you click the Multitouch View button on
selecting either Multi – Point or Single – Point and you can test with your
fingers or palms simultaneously on the touch screen
This contents are reference to the contents developer with API(Application
Program Interface) as the test shows the area of LED sensors that are
recognized upon touch.
* Additional Information on Multi – Point Touch Test
As the below picture shows, there are virtual images beside the real touch points when fingers
are positioned at different X or Y coordinates. These virtual images are moving in a regulation
according to the real touch point. The contents developer, therefore, should refer to this virtual
image regulation.
17
4) – 1) Fine Coordinate
Correction
After you calibrate the touch screen, the cursor should be located
directly underneath your finger when you touch the screen. However,
you may prefer to offset the cursor slightly above your touch so you
can see the cursor and point more easily and precisely to small
objects.
Touch Cursor Shift option lets you define the distance between
your fingertip and the position of the cursor on the screen.
Offsetting the cursor is helpful when selecting small items, such as
single letters in word processing, check boxes, or radio buttons.
Click [Up][Down][Left][Right] to make X or Y offset.
Optical Point
Touch(Cursor) Point
4) – 2)
Sometimes the screen image extends beyond the edge of the
monitor bezel. In these cases, it may be difficult to touch items at
the left and right edges of the screen. Normally monitor has auto scaling
function itself. 4)-2 function is required to adjust the auto scaled image for
more accuracy.
Click [X Zoom -(or +)][Y Zoom -(or +)] to adjust the screen image.
18
Popup Control
2)
1)
3)
4)
1) Popup Control
STRT/STOP
Start/Stop Popup Control Menu(See page 20).
2) Popup Activate
Area
The Popup Control Menu appears on the screen when you touch your finger or
any objects on the marked position and remove after the fixed time at the 3)
Popup Activate Time.
3) Area Allow
Percent
Specifying the area where you touch your finger or any objects to bring the
Popup Control Menu up.
4) Pop Activate
Time
Setting the time to bring the Popup Control Menu up.
Nexio Co., Ltd.
19
Popup Control Menu
1)
2)
3)
4)
1) Disable Mouse
Action
Touch action is not recognized on all programs on the screen. By re-click, the
option is back to the basic function.
2) Enable Touch
Area Limit
The size of a touch object can be adjusted on X Y limit(See page 12).
3) Open Touch
Control Panel
Touch Control Panel is appeared.
4) Exit
Popup Control Menu is closed.
Nexio Co., Ltd.
20
Multi Monitor
Display
Mapping Multiple
Monitors
You must map each touch screen to a monitor using the [Mapping] button. You
must do this in order to individually calibrate and configure each touch screen
connected to your system. Once you have properly mapped the touch screens,
you set the current touch screen by selecting the icon of the desired monitor.
Clone mode
In the clone mode, one of the monitor is selected as the primary one. All other
monitors usually have the same image as the primary monitor. The touch
screen on each monitor functions as clone mode too.
Nexio Co., Ltd.
21
Independent mode
In the independent mode, all screens show same image and the touch screen
on each monitor functions independently.
Stretch mode
The stretch mode makes all screens combine for a single image. In this mode
the touch screen on each monitor functions independently.
Nexio Co., Ltd.
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising