torque testers and calibration equipment

torque testers and calibration equipment
19220 san jose avenue • city of industry, ca 91748 • usa
(626) 965-0668 • (626) 965-2410 • www.cditorque.com
CAT-CDI.C-05/2010
TORQUE TESTERS
AND CALIBRATION
EQUIPMENT
THE MOST RESPECTED NAME IN TORQUE TOOLS,
TESTERS AND CALIBRATION EQUIPMENT.
CDI was founded in 1968 and over the years
has developed into a world class torque products
manufacturing company. The company earned
its ISO 9001 International Quality System
Certification in 1998, demonstrating a commitment
to provide our customers with the highest quality
torque measurement and torque limiting devices
in the world. Today, the CDI Brand is now part of
Snap-on Specialty Tools a unique member of the
Snap-on Incorporated family of companies and
responsible for ATI Tools brand. Specialty Tools
manufacturers products for other Snap-on
business and select OEM and Industrial customers
world-wide.
CDI is the primary supplier of torque wrenches and
torque screwdrivers to the GSA (General Service
Administration of the U.S. Government) since 1968.
All CDI products are individually serialized and meet
or exceed appropriate ASME and ISO standards.
CDI’s mechanical torque product lines include
click type torque wrenches, dial indicating torque
wrenches, torque limiting screwdrivers and a
number of special application torque products.
CDI has long been a major innovator and leader
in electronic torque measurement and torque
calibration equipment. We manufacture more
electronic torque wrenches than any other
company and are a recognized leader in electronic
torque testing and calibration equipment.
We work with our customers to develop the tools
they need to solve torque-related problems. CDI’s
mission is to remain the world’s largest developer
and supplier of quality torque tools, torque testing
equipment and calibration services.
All Snap-on Specialty Tools employees recognize
the importance of our customers’ satisfaction with
our products and services. We have a full time
Product Development Team dedicated to develop
and deliver innovative new torque products.
CDI TORQUE TESTERS AND CALIBRATION EQUIPMENT
Table of Contents
MULTITEST Torque, Force & Tension Calibration System.......... 2
MULTITEST Motorized System............................................ 5
TORQUE
TOOLS
TABLE OF
CONTENTS
SURETEST Torque Calibration System.................................. 6
MULTITEST / SURETEST Accessories................................... 8
CALIBRATION EQUIPMENT...............................................10
Digital Torque TesterTM (DTT)......................................14
MULTITORQ Torque and Data Collection System....................16
Digital Power Torque Multipliers - DPT Series............18
TORQUE FACTS..............................................................19
REPAIR & SERVICE CENTER..............................................21
INDEX...........................................................................22
WARRANTY STATIONS....................................................24
TORQUE TOOLS
Thank you for providing us the opportunity to
serve you.
CDI Torque Products is a brand of Snap-on Specialty Tools and reserves the right to change model, styles and colors
of all products and accessories without notice. CDI Torque Products, Snap-on Specialty Tools, is not responsible for
any typographical errors.
The following products are trademarks of CDI Torque Products, Snap-on Specialty Tools:
MULTITEST TM, SURETEST TM, MULTITORQ TM and DTT TM.
© 2010 CDI Torque Products, A Snap-on Specialty Tools Brand, City of Industry, CA • All Rights Reserved
1
THE MOST RESPECTED NAME IN TORQUE TOOLS,
TESTERS AND CALIBRATION EQUIPMENT.
CDI was founded in 1968 and over the years
has developed into a world class torque products
manufacturing company. The company earned
its ISO 9001 International Quality System
Certification in 1998, demonstrating a commitment
to provide our customers with the highest quality
torque measurement and torque limiting devices
in the world. Today, the CDI Brand is now part of
Snap-on Specialty Tools a unique member of the
Snap-on Incorporated family of companies and
responsible for ATI Tools brand. Specialty Tools
manufacturers products for other Snap-on
business and select OEM and Industrial customers
world-wide.
CDI is the primary supplier of torque wrenches and
torque screwdrivers to the GSA (General Service
Administration of the U.S. Government) since 1968.
All CDI products are individually serialized and meet
or exceed appropriate ASME and ISO standards.
CDI’s mechanical torque product lines include
click type torque wrenches, dial indicating torque
wrenches, torque limiting screwdrivers and a
number of special application torque products.
CDI has long been a major innovator and leader
in electronic torque measurement and torque
calibration equipment. We manufacture more
electronic torque wrenches than any other
company and are a recognized leader in electronic
torque testing and calibration equipment.
We work with our customers to develop the tools
they need to solve torque-related problems. CDI’s
mission is to remain the world’s largest developer
and supplier of quality torque tools, torque testing
equipment and calibration services.
All Snap-on Specialty Tools employees recognize
the importance of our customers’ satisfaction with
our products and services. We have a full time
Product Development Team dedicated to develop
and deliver innovative new torque products.
CDI TORQUE TESTERS AND CALIBRATION EQUIPMENT
Table of Contents
MULTITEST Torque, Force & Tension Calibration System.......... 2
MULTITEST Motorized System............................................ 5
TORQUE
TOOLS
TABLE OF
CONTENTS
SURETEST Torque Calibration System.................................. 6
MULTITEST / SURETEST Accessories................................... 8
CALIBRATION EQUIPMENT...............................................10
Digital Torque TesterTM (DTT)......................................14
MULTITORQ Torque and Data Collection System....................16
TORQUE FACTS..............................................................19
REPAIR & SERVICE CENTER..............................................21
INDEX...........................................................................22
WARRANTY STATIONS....................................................24
TORQUE TOOLS
Thank you for providing us the opportunity to
serve you.
CDI Torque Products is a brand of Snap-on Specialty Tools and reserves the right to change model, styles and colors
of all products and accessories without notice. CDI Torque Products, Snap-on Specialty Tools, is not responsible for
any typographical errors.
The following products are trademarks of CDI Torque Products, Snap-on Specialty Tools:
MULTITEST TM, SURETEST TM, MULTITORQ TM and DTT TM.
© 2010 CDI Torque Products, A Snap-on Specialty Tools Brand, City of Industry, CA • All Rights Reserved
1
Multitest Calibration System
Multitest Premier Calibration System MODEL 2000-1
The MULTITEST Torque, Force and Tension Calibration
System is the most sophisticated system available in the industry.
This system will test and calibrate most types of torque wrenches,
torque screwdrivers, torque multipliers, cable tensiometers, tension
and compression gauges and non-impact power tools such as
nutrunners and electric screwdrivers.
CDI’s All Inclusive Calibration System
TORQUE
TOOLS
FEATURES
CALIBRATION
SYSTEMS
• Our most comprehensive calibration system for torque
and force
• Calibrate torque wrenches up to 2000 ft. lbs.
• Check the accuracy and calibrate cable tensiometers,
tension and compression gauges
• Includes the easy-to-use 4-in-1 transducer kit
• Eleven single transducers ranging from 5 in. oz. up to
2000 ft. lbs.
• Includes torque screwdriver testing kit
• Automatic safety feature locks system to prevent overloading and possible damage to transducers
• Displays eight units of torque and six units of force
• Also includes a calibration stand and all necessary
calibration wheels, arms, weights and trays
• Downloading software included
The Multitest Calibration System can be ordered several ways. Each
system begins with the same three basic components: the Multitest
Digital Monitor, the Roller Cabinet and the 2000 ft. lb. Mechanical Loader. We offer three different systems, the “Premier”, the
“Supreme” and the “Basic”. These systems and their components
are described in detail on the next few pages.
In addition, you may order any component separately to build your
own “custom” system.
FEATURES
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, cw & ccw,
from 10% to 100% of full scale, (except 2000-4-02*)
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Programmable manual or automatic options for clear,
store and print functions
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units:
in. oz., in. lb., ft. lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton, deciNewton,
kilopound (kilogram) and gram
• Automatic lock-up for transducer protection
• All transducers supplied with certification
• Individually serialized with matching certificate
of calibration traceable to N.I.S.T.
TORQUE TOOLS
MODEL 2000-1 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
Product Code
Description
2000-610-02
MULTITEST Monitor
2000-550-02
Extension Arm Kit for Long Torque Wrenches
2000-600-02
Mechanical Loader 2000 ft. lb. capacity
2000-750-02
Torque Screwdriver Testing Kit
2000-100-02
Roller Cabinet
2000-320-0
No. 1 Weight Set
2000-400-02
4 in 1 Transducer Kit, 4 in. lbs. to 250 ft. lbs.
2500-50-0
2-1/2” Calibration Wheel
2000-500-02
4 In 1 Transducer Adapter Kit
2000-151-0
5” Calibration Wheel
2000-4-02*
Transducer Range From 5 - 50 in. ozs. (*± 0.5%)
2000-152-0
10” Butterfly Wheel
2000-5-02
Transducer Range From 15 - 200 in. ozs.
2000-154-0
40” Calibration Arm
2000-6-02
Transducer Range From 4 - 50 in. lbs.
390-2-2
4 oz. Weight Hanger
2000-65-02
Transducer Range From 15 - 150 in. lbs.
2000-301
8 oz. Weight Hanger
2000-7-02
Transducer Range From 30 - 400 in. lbs.
2000-304-0
7.5 lb. Weight Hanger
2000-8-02
Transducer Range From 80 - 1000 in. lbs.
2000-302-0
15 lb. Weight Hanger
2000-10-02
Transducer Range From 10 - 125 ft. lbs.
2000-303-0
50 lb. Weight Hanger
2000-11-02
Transducer Range From 20 - 250 ft. lbs.
2000-250-02
Calibration Stand Kit
2000-12-02
Transducer Range From 60 - 600 ft. lbs.
2000-260-0
Tensiometer Testing Kit
2000-13-02
Transducer Range From 100 - 1000 ft. lbs.
2000-261-0
Tension Gauge Testing Kit
2000-14-02
Transducer Range From 200 - 2000 ft. lbs.
2000-262-0
Compression Gauge Testing Kit
900-0-1KIT
Joint Rate Simulator 50 in. lbs. capacity
2000-263-02
Force Arm Kit
900-2-01KIT
Joint Rate Simulator 400 in. lbs. capacity
2000-SW
PC Software
900-3-01KIT
Joint Rate Simulator 1000 in. lbs. capacity
2000-50-1
Cable from MULTITEST to PC
Multitest Digital Monitor with Soft Touch Keys.
Add suffix 220V for 220 volt applications.
WARNING
2
Download torque values, SPC data and histograms.
4 in 1 Transducer Kit with Mounting Adapter
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
3
Multitest Calibration System
Multitest Premier Calibration System MODEL 2000-1
The MULTITEST Torque, Force and Tension Calibration
System is the most sophisticated system available in the industry.
This system will test and calibrate most types of torque wrenches,
torque screwdrivers, torque multipliers, cable tensiometers, tension
and compression gauges and non-impact power tools such as
nutrunners and electric screwdrivers.
CDI’s All Inclusive Calibration System
TORQUE
TOOLS
FEATURES
CALIBRATION
SYSTEMS
• Our most comprehensive calibration system for torque
and force
• Calibrate torque wrenches up to 2000 ft. lbs.
• Check the accuracy and calibrate cable tensiometers,
tension and compression gauges
• Includes the easy-to-use 4-in-1 transducer kit
• Eleven single transducers ranging from 5 in. oz. up to
2000 ft. lbs.
• Includes torque screwdriver testing kit
• Automatic safety feature locks system to prevent overloading and possible damage to transducers
• Displays eight units of torque and six units of force
• Also includes a calibration stand and all necessary
calibration wheels, arms, weights and trays
• Downloading software included
The Multitest Calibration System can be ordered several ways. Each
system begins with the same three basic components: the Multitest
Digital Monitor, the Roller Cabinet and the 2000 ft. lb. Mechanical Loader. We offer three different systems, the “Premier”, the
“Supreme” and the “Basic”. These systems and their components
are described in detail on the next few pages.
In addition, you may order any component separately to build your
own “custom” system.
FEATURES
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, cw & ccw,
from 10% to 100% of full scale, (except 2000-4-02*)
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Programmable manual or automatic options for clear,
store and print functions
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units:
in. oz., in. lb., ft. lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton, deciNewton,
kilopound (kilogram) and gram
• Automatic lock-up for transducer protection
• All transducers supplied with certification
• Individually serialized with matching certificate
of calibration traceable to N.I.S.T.
TORQUE TOOLS
MODEL 2000-1 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
Product Code
Description
2000-610-02
MULTITEST Monitor
2000-550-02
Extension Arm Kit for Long Torque Wrenches
2000-600-02
Mechanical Loader 2000 ft. lb. capacity
2000-750-02
Torque Screwdriver Testing Kit
2000-100-02
Roller Cabinet
2000-320-0
No. 1 Weight Set
2000-400-02
4 in 1 Transducer Kit, 4 in. lbs. to 250 ft. lbs.
2500-50-0
2-1/2” Calibration Wheel
2000-500-02
4 In 1 Transducer Adapter Kit
2000-151-0
5” Calibration Wheel
2000-4-02*
Transducer Range From 5 - 50 in. ozs. (*± 0.5%)
2000-152-0
10” Butterfly Wheel
2000-5-02
Transducer Range From 15 - 200 in. ozs.
2000-154-0
40” Calibration Arm
2000-6-02
Transducer Range From 4 - 50 in. lbs.
390-2-2
4 oz. Weight Hanger
2000-65-02
Transducer Range From 15 - 150 in. lbs.
2000-301
8 oz. Weight Hanger
2000-7-02
Transducer Range From 30 - 400 in. lbs.
2000-304-0
7.5 lb. Weight Hanger
2000-8-02
Transducer Range From 80 - 1000 in. lbs.
2000-302-0
15 lb. Weight Hanger
2000-10-02
Transducer Range From 10 - 125 ft. lbs.
2000-303-0
50 lb. Weight Hanger
2000-11-02
Transducer Range From 20 - 250 ft. lbs.
2000-250-02
Calibration Stand Kit
2000-12-02
Transducer Range From 60 - 600 ft. lbs.
2000-260-0
Tensiometer Testing Kit
2000-13-02
Transducer Range From 100 - 1000 ft. lbs.
2000-261-0
Tension Gauge Testing Kit
2000-14-02
Transducer Range From 200 - 2000 ft. lbs.
2000-262-0
Compression Gauge Testing Kit
900-0-1KIT
Joint Rate Simulator 50 in. lbs. capacity
2000-263-02
Force Arm Kit
900-2-01KIT
Joint Rate Simulator 400 in. lbs. capacity
2000-SW
PC Software
900-3-01KIT
Joint Rate Simulator 1000 in. lbs. capacity
2000-50-1
Cable from MULTITEST to PC
Multitest Digital Monitor with Soft Touch Keys.
Add suffix 220V for 220 volt applications.
WARNING
2
Download torque values, SPC data and histograms.
4 in 1 Transducer Kit with Mounting Adapter
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
3
Multitest SUPREME Calibration System MODEL 2000-2
Multitest MOTORIZED System model 2800-1
CDI’s Torque-Only System. Listed below are all of the components to
CDI’s “Supreme” MULTITEST Torque Calibration System. This is our midrange system for torque, which has a range from 15 in. ozs. to 2000 ft. lbs.
Designed for the user who requires precision accuracy and reliability in a
torque calibration system. This set includes an extension arm for long torque
wrenches and 3 joint rate simulators for testing power tools. (Not for use with
impact and pulse tools.) PC compatible software and cables are also included.
CDI has taken torque calibration to a higher level. Increase
your productivity with the 2000 ft. lb. fully automatic
motorized loader. Designed for the high volume calibration
laboratory that requires a high-speed, automatic torque
calibration system. In the automatic mode, the MULTITEST
Motorized System will cycle, test and calibrate most torque
wrenches. With our optional kits, you can calibrate torque
screwdrivers, cable tensiometers, tension and compression
gauges utilizing the manual mode, (hand crank only).
MODEL 2000-2 INCLUDES ALL OF THE FOLLOWING:
Description
2000-610-02
Multitest Digital Monitor
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
FEATURES
2000-500-02
4 in 1 Transducer Adapter Kit
2000-4-02
Transducer Kit-Range 5-50 in. oz.
2000-5-02
Transducer Kit-Range 15-200 in. oz.
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, cw &
ccw, from 10% to 100% of full scale
• Dual mode function (manual & automatic)
• Automatic speed control
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Emergency stop button
• Programmable manual or automatic options
for clear, store and print functions
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units: in. oz., in.
lb., ft. lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton,
deciNewton, kilopound (kilogram) and gram
• Automatic lock-up for transducer protection
• All transducers are individually serialized with matching
certificate of calibration traceable to N.I.S.T.
Extension Arm for Long Torque Wrench, Reach up to 80”
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
2000-SW
Wedgelink Software
2000-50-1
Cable from MULTITEST or SURETEST to PC
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
Multitest BASIC Calibration System MODEL 2000-3
TORQUE TOOLS
Listed below are all of the components to CDI’s “Basic” MULTITEST
Calibration System. The system includes the 4 in 1 transducer, which is
capable of calibrating torque tools from 4 in. lbs. through 250 ft. lbs. Also
included is the 2000 ft. lb. loader and the MULTITEST monitor.
model 2800-1 INCLUDES ALL OF THE FOLLOWING:
MODEL 2000-3 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
2000-610-02
Multitest Digital Monitor
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
CALIBRATION
SYSTEMS
The MULTITEST Motorized System consists of the Monitor,
Motorized Loader, Roller Cabinet and Extension Arm. Please
order the transducers separately based on your individual
needs. (Not for use with impact and pulse tools.)
Product Code
2000-550-02
TORQUE
TOOLS
Product Code
Description
2000-810-01
MULTITEST Digital Monitor
2000-800-02
Motorized Loader with roller cabinet
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
4 in 1 Transducer Kit with Mounting Adapter.
Dual Mode Function Manual and Automatic
Add suffix 220V for 220 volt applications.
Custom Calibration Systems
Don’t see the exact system you’re looking for? Please call customer service to
request a quotation on a custom calibration system. We will provide assistance
designing a testing system to fit your application and specifications.
Add suffix 220V for 220 volt applications.
4
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
5
Multitest SUPREME Calibration System MODEL 2000-2
Multitest MOTORIZED System model 2800-1
CDI’s Torque-Only System. Listed below are all of the components to
CDI’s “Supreme” MULTITEST Torque Calibration System. This is our midrange system for torque, which has a range from 15 in. ozs. to 2000 ft. lbs.
Designed for the user who requires precision accuracy and reliability in a
torque calibration system. This set includes an extension arm for long torque
wrenches and 3 joint rate simulators for testing power tools. (Not for use with
impact and pulse tools.) PC compatible software and cables are also included.
CDI has taken torque calibration to a higher level. Increase
your productivity with the 2000 ft. lb. fully automatic
motorized loader. Designed for the high volume calibration
laboratory that requires a high-speed, automatic torque
calibration system. In the automatic mode, the MULTITEST
Motorized System will cycle, test and calibrate most torque
wrenches. With our optional kits, you can calibrate torque
screwdrivers, cable tensiometers, tension and compression
gauges utilizing the manual mode, (hand crank only).
MODEL 2000-2 INCLUDES ALL OF THE FOLLOWING:
Description
2000-610-02
Multitest Digital Monitor
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
FEATURES
2000-500-02
4 in 1 Transducer Adapter Kit
2000-4-02
Transducer Kit-Range 5-50 in. oz.
2000-5-02
Transducer Kit-Range 15-200 in. oz.
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, cw &
ccw, from 10% to 100% of full scale
• Dual mode function (manual & automatic)
• Automatic speed control
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Emergency stop button
• Programmable manual or automatic options
for clear, store and print functions
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units: in. oz., in.
lb., ft. lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton,
deciNewton, kilopound (kilogram) and gram
• Automatic lock-up for transducer protection
• All transducers are individually serialized with matching
certificate of calibration traceable to N.I.S.T.
Extension Arm for Long Torque Wrench, Reach up to 80”
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
2000-SW
Wedgelink Software
2000-50-1
Cable from MULTITEST or SURETEST to PC
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
Multitest BASIC Calibration System MODEL 2000-3
TORQUE TOOLS
Listed below are all of the components to CDI’s “Basic” MULTITEST
Calibration System. The system includes the 4 in 1 transducer, which is
capable of calibrating torque tools from 4 in. lbs. through 250 ft. lbs. Also
included is the 2000 ft. lb. loader and the MULTITEST monitor.
model 2800-1 INCLUDES ALL OF THE FOLLOWING:
MODEL 2000-3 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
2000-610-02
Multitest Digital Monitor
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
CALIBRATION
SYSTEMS
The MULTITEST Motorized System consists of the Monitor,
Motorized Loader, Roller Cabinet and Extension Arm. Please
order the transducers separately based on your individual
needs. (Not for use with impact and pulse tools.)
Product Code
2000-550-02
TORQUE
TOOLS
Product Code
Description
2000-810-01
MULTITEST Digital Monitor
2000-800-02
Motorized Loader with roller cabinet
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
4 in 1 Transducer Kit with Mounting Adapter.
Dual Mode Function Manual and Automatic
Add suffix 220V for 220 volt applications.
Custom Calibration Systems
Don’t see the exact system you’re looking for? Please call customer service to
request a quotation on a custom calibration system. We will provide assistance
designing a testing system to fit your application and specifications.
Add suffix 220V for 220 volt applications.
4
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
5
SURETEST Premier Calibration System model 5000-1
SURETEST SUPREME Calibration System model 5000-2
The SURETEST is a laboratory grade instrument which captures
torque measurements with a user friendly interface. It features a large
LCD graphical display. It may be used with a single transducer or can
be used as the principal component of a Torque Calibration System.
CDI’s Mid-Range Torque System. Listed below are all of the components
to CDI’s “Supreme” SURETEST Torque Calibration System. This mid-range
torque system has a range from 5 in. ozs. to 2000 ft. lbs. Choose SURETEST
for unsurpassed accuracy and reliability in a torque calibration system. Also
includes an extension arm for long torque wrenches and 3 joint rate simulators
for testing power tools. (Not for use with impact and pulse tools.) PC
compatible software and cables are included.
The SURETEST features versatile data acquisition capabilities including
measurement storage, retrieval, statistical analysis and automatic
downloading to an external printer/computer. The SURETEST stores,
recalls and downloads up to 3000 torque readings. The system
provides readings with an accuracy of ± .25% of indicated
value and features multiple languages: English, Spanish, French,
Japanese and German.
Description
5000-ST
Suretest Monitor w/Cable and Case
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
2000-4-02
Transducer Kit-Range 5-50 in. oz.
FEATURES
2000-5-02
Transducer Kit-Range 15-200 in. oz.
• Large LCD graphical display
• Five built-in languages
• Date and time stamp
• Dual RS-232 ports, analog output
• SPC built-in
• Automatic downloading
• Accuracy: ± 0.25% of indicated value, cw & ccw,
from 10% to 100% of full scale
• Transducers available from 5 in. ozs. to 2000 ft. lbs. of torque
• All transducers are “smart” (plug and play)
• Readout in eight different engineering units
• Stores and recalls 3000 torque values (date & time)
• Fully automatic voltage input adaptation (100 - 240 VAC input)
• Data is saved when SURETEST is turned off
• All transducers are individually serialized with
matching certificate of calibration traceable to N.I.S.T.
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
The SURETEST Torque Calibration System may be ordered in three
different combinations. The “Premier”, the “Supreme” and the “Basic”
systems are described on these pages. In addition, you may order any
component separately to build your own “custom” system.
TORQUE TOOLS
6
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
2000-SW
Wedgelink Software
2000-50-1
Cable from MULTITEST or SURETEST to PC
2000-50-2
Cable from MULTITEST or SURETEST to External Serial Printer
4 in 1 Transducer Slides Easily into Adapter Kit
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
Set-up is quick and easy utilizing soft touch keys.
SURETEST BASIC Calibration System model 5000-3
model 5000-1 INCLUDES ALL OF THE FOLLOWING:
Add suffix 220V for 220 volt applications.
CALIBRATION
SYSTEMS
model 5000-2 INCLUDES ALL OF THE FOLLOWING:
Product Code
Easy, quick change transducers.
TORQUE
TOOLS
Product Code
Description
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
2000-320-0
Weight Set #1
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2500-50-0
21⁄2” Calibration Wheel
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-151-0
5” Calibration Wheel
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-152-0
10” Butterfly Calibration Wheel
2000-500-02
4 in 1 Transducer Adapter Kit
2000-154-0
40” Calibration Arm
2000-4-02
Transducer Kit-Range 5-50 in. oz.
390-2-2
4 oz. Hanger Calibration Weight Tray
2000-5-02
Transducer Kit-Range 15-200 in. oz.
2000-301
8 oz. Hanger Calibration Weight Tray
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-304-0
7.5 lb. Calibration Weight Tray
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-302-0
15 lb. Calibration Weight Tray
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
2000-303-0
50 lb. Calibration Weight Tray
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
2000-250-02
Calibration Stand Kit
900-0-1KIT
1
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
2000-SW
Wedgelink Software
900-2-01KIT
3
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
2000-50-1
Cable from MULTITEST or SURETEST to PC
900-3-01KIT
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
2000-50-2
Cable from MULTITEST or SURETEST to External
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-02 Loader
Serial Printer
Listed below are all of the components to CDI’s “Basic” SURETEST
Calibration System. This system, by itself is capable of calibrating
torque tools from 4 in. lbs. up to 600 ft. lbs. The set includes our 4 in 1
Transducer, adapter, 600 ft. lb. transducer, loader and monitor.
model 5000-3 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
600TL2
Mechanical Loader 600 ft. lb.
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
Custom Calibration Systems
Don’t see the exact system you’re looking for? Please call customer service to
request a quotation on a custom calibration system. We will provide assistance
designing a testing system to fit your application and specifications.
Add suffix 220V for 220 volt applications.
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
7
SURETEST Premier Calibration System model 5000-1
SURETEST SUPREME Calibration System model 5000-2
The SURETEST is a laboratory grade instrument which captures
torque measurements with a user friendly interface. It features a large
LCD graphical display. It may be used with a single transducer or can
be used as the principal component of a Torque Calibration System.
CDI’s Mid-Range Torque System. Listed below are all of the components
to CDI’s “Supreme” SURETEST Torque Calibration System. This mid-range
torque system has a range from 5 in. ozs. to 2000 ft. lbs. Choose SURETEST
for unsurpassed accuracy and reliability in a torque calibration system. Also
includes an extension arm for long torque wrenches and 3 joint rate simulators
for testing power tools. (Not for use with impact and pulse tools.) PC
compatible software and cables are included.
The SURETEST features versatile data acquisition capabilities including
measurement storage, retrieval, statistical analysis and automatic
downloading to an external printer/computer. The SURETEST stores,
recalls and downloads up to 3000 torque readings. The system
provides readings with an accuracy of ± .25% of indicated
value and features multiple languages: English, Spanish, French,
Japanese and German.
Description
5000-ST
Suretest Monitor w/Cable and Case
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
2000-4-02
Transducer Kit-Range 5-50 in. oz.
FEATURES
2000-5-02
Transducer Kit-Range 15-200 in. oz.
• Large LCD graphical display
• Five built-in languages
• Date and time stamp
• Dual RS-232 ports, analog output
• SPC built-in
• Automatic downloading
• Accuracy: ± 0.25% of indicated value, cw & ccw,
from 10% to 100% of full scale
• Transducers available from 5 in. ozs. to 2000 ft. lbs. of torque
• All transducers are “smart” (plug and play)
• Readout in eight different engineering units
• Stores and recalls 3000 torque values (date & time)
• Fully automatic voltage input adaptation (100 - 240 VAC input)
• Data is saved when SURETEST is turned off
• All transducers are individually serialized with
matching certificate of calibration traceable to N.I.S.T.
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
The SURETEST Torque Calibration System may be ordered in three
different combinations. The “Premier”, the “Supreme” and the “Basic”
systems are described on these pages. In addition, you may order any
component separately to build your own “custom” system.
TORQUE TOOLS
6
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
2000-SW
Wedgelink Software
2000-50-1
Cable from MULTITEST or SURETEST to PC
2000-50-2
Cable from MULTITEST or SURETEST to External Serial Printer
4 in 1 Transducer Slides Easily into Adapter Kit
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
Set-up is quick and easy utilizing soft touch keys.
SURETEST BASIC Calibration System model 5000-3
model 5000-1 INCLUDES ALL OF THE FOLLOWING:
Add suffix 220V for 220 volt applications.
CALIBRATION
SYSTEMS
model 5000-2 INCLUDES ALL OF THE FOLLOWING:
Product Code
Easy, quick change transducers.
TORQUE
TOOLS
Product Code
Description
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
2000-320-0
Weight Set #1
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2500-50-0
21⁄2” Calibration Wheel
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H
2000-151-0
5” Calibration Wheel
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-152-0
10” Butterfly Calibration Wheel
2000-500-02
4 in 1 Transducer Adapter Kit
2000-154-0
40” Calibration Arm
2000-4-02
Transducer Kit-Range 5-50 in. oz.
390-2-2
4 oz. Hanger Calibration Weight Tray
2000-5-02
Transducer Kit-Range 15-200 in. oz.
2000-301
8 oz. Hanger Calibration Weight Tray
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
2000-304-0
7.5 lb. Calibration Weight Tray
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
2000-302-0
15 lb. Calibration Weight Tray
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
2000-303-0
50 lb. Calibration Weight Tray
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
2000-250-02
Calibration Stand Kit
900-0-1KIT
1
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
2000-SW
Wedgelink Software
900-2-01KIT
3
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
2000-50-1
Cable from MULTITEST or SURETEST to PC
900-3-01KIT
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
2000-50-2
Cable from MULTITEST or SURETEST to External
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-02 Loader
Serial Printer
Listed below are all of the components to CDI’s “Basic” SURETEST
Calibration System. This system, by itself is capable of calibrating
torque tools from 4 in. lbs. up to 600 ft. lbs. The set includes our 4 in 1
Transducer, adapter, 600 ft. lb. transducer, loader and monitor.
model 5000-3 INCLUDES ALL OF THE FOLLOWING:
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
600TL2
Mechanical Loader 600 ft. lb.
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
2000-500-02
4 in 1 Transducer Adapter Kit
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
Custom Calibration Systems
Don’t see the exact system you’re looking for? Please call customer service to
request a quotation on a custom calibration system. We will provide assistance
designing a testing system to fit your application and specifications.
Add suffix 220V for 220 volt applications.
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
7
MULTITEST/SURETEST ACCESSORIES
MULTITEST/SURETEST ACCESSORIES
Build Your Own Torque Calibration System.
Build Your Own Torque Calibration System.
MULTITEST/SURETEST ACCESSORIES
TORQUE
TOOLS
MULTITEST/SURETEST ACCESSORIES
Product Code
Description
Product Code
Description
2000-610-02
MULTITEST Monitor
2000-550-02
Extension Arm Kit for Long Torque Wrenches
ACCESSORIES
(For Torque Wrenches over 45 inches long)
5000-ST
Product Code
Description
900-0-1KIT
Joint Rate Simulator 50 in. lbs. capacity
900-2-01KIT
Joint Rate Simulator 400 in. lbs. capacity (Shown)
900-3-01KIT
Joint Rate Simulator 1000 in. lbs. capacity (Not Shown)
Product Code
Description
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-2
2000-750-06
Torque Screwdriver Testing Kit for 600TL2 (Not Shown)
Socket Adapters Female X Female
Product Code
Description
Product Code
Opening
X
Opening
2000-261-0
Tension Gauge Testing Kit
⁄4” hex X
1
⁄4” sq. X
1
⁄4” sq. X
3
⁄8” sq. X
3
⁄2” sq. X
3
⁄2” sq. X
1
Product Code
Description
2000-600-02
Mechanical Loader, 2000 ft. lbs.
600TL2
Female by Female socket adapters are used in a variety
of torque testing and torque calibration applications.
SURETEST Monitor
Mechanical Loader, 600 ft. lbs.
260-27
1
342-40
1
342-41-1
1
342-41-2
3
65-26-2
1
65-26-3
1
65-78-1
1
⁄2” sq. X
3
65-78-2
3
⁄4” sq. X
3
75-25-1
1 sq. X
3
⁄4” sq.
Product Code
Description
75-20
1 sq. X
1 “ sq.
2000-263-02
Force Arm Kit
(Not Shown)
(Tension Gauge, Force Arms not included)
⁄4” sq.
⁄4” sq.
⁄8” sq.
⁄8” sq.
Product Code
Description
⁄8” sq.
2000-260-0
Tensiometer Testing Kit
(Tensiometer, Force Arms not included)
⁄2” sq.
⁄4” sq.
⁄4” sq.
TORQUE TOOLS
(Only one required for any testing kit)
Description
2000-100-02
Roller Cabinet
Product Code
Description
2000-262-0
Compression Gauge Testing Kit
(Compression Gauge, Force Arms not included)
4 in 1 Transducer 2000-400-02
8
Product Code
Transducer 2000-14-02
Adapter Kit 2000-500-02
Transducer 2000-6-02
Product Code
Description
2000-400-02
4 in 1 Transducer
(Shown)
2000-500-02
4 in 1 Transducer Adapter Kit
(Shown)
Product Code
Description
2000-4-02
Transducer Range 5 - 50 in. ozs. (Not Shown)
2000-50-1
Cable from MULTITEST/SURETEST to PC
2000-5-02
Transducer Range 15 - 200 in. ozs. (Not Shown)
2000-6-02
Transducer Range 4 - 50 in. lbs. (Shown)
2000-65-02
Transducer Range 15 - 150 in. lbs. (Not Shown)
Product Code
Description
2000-7-02
Transducer Range 30 - 400 in. lbs. (Not Shown)
2000-50-2
Cable from MULTITEST/SURETEST to external serial printer
2000-8-02
Transducer Range 80 - 1000 in. lbs. (Not Shown)
2000-10-02
Transducer Range 10 - 125 ft. lbs. (Not Shown)
2000-11-02
Transducer Range 20 - 250 ft. lbs. (Not Shown)
Product Code
Description
2000-12-02
Transducer Range 60 - 600 ft. lbs. (Not Shown)
2000-SW
PC Software
2000-13-02
Transducer Range 100 - 1000 ft. lbs. (Not Shown)
2000-14-02
Transducer Range 200 - 2000 ft. lbs. (Shown)
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
9
MULTITEST/SURETEST ACCESSORIES
MULTITEST/SURETEST ACCESSORIES
Build Your Own Torque Calibration System.
Build Your Own Torque Calibration System.
MULTITEST/SURETEST ACCESSORIES
TORQUE
TOOLS
MULTITEST/SURETEST ACCESSORIES
Product Code
Description
Product Code
Description
2000-610-02
MULTITEST Monitor
2000-550-02
Extension Arm Kit for Long Torque Wrenches
ACCESSORIES
(For Torque Wrenches over 45 inches long)
5000-ST
Product Code
Description
900-0-1KIT
Joint Rate Simulator 50 in. lbs. capacity
900-2-01KIT
Joint Rate Simulator 400 in. lbs. capacity (Shown)
900-3-01KIT
Joint Rate Simulator 1000 in. lbs. capacity (Not Shown)
Product Code
Description
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-2
2000-750-06
Torque Screwdriver Testing Kit for 600TL2 (Not Shown)
Socket Adapters Female X Female
Product Code
Description
Product Code
Opening
X
Opening
2000-261-0
Tension Gauge Testing Kit
⁄4” hex X
1
⁄4” sq. X
1
⁄4” sq. X
3
⁄8” sq. X
3
⁄2” sq. X
3
⁄2” sq. X
1
Product Code
Description
2000-600-02
Mechanical Loader, 2000 ft. lbs.
600TL2
Female by Female socket adapters are used in a variety
of torque testing and torque calibration applications.
SURETEST Monitor
Mechanical Loader, 600 ft. lbs.
260-27
1
342-40
1
342-41-1
1
342-41-2
3
65-26-2
1
65-26-3
1
65-78-1
1
⁄2” sq. X
3
65-78-2
3
⁄4” sq. X
3
75-25-1
1 sq. X
3
⁄4” sq.
Product Code
Description
75-20
1 sq. X
1 “ sq.
2000-263-02
Force Arm Kit
(Not Shown)
(Tension Gauge, Force Arms not included)
⁄4” sq.
⁄4” sq.
⁄8” sq.
⁄8” sq.
Product Code
Description
⁄8” sq.
2000-260-0
Tensiometer Testing Kit
(Tensiometer, Force Arms not included)
⁄2” sq.
⁄4” sq.
⁄4” sq.
TORQUE TOOLS
(Only one required for any testing kit)
Description
2000-100-02
Roller Cabinet
Product Code
Description
2000-262-0
Compression Gauge Testing Kit
(Compression Gauge, Force Arms not included)
4 in 1 Transducer 2000-400-02
8
Product Code
Transducer 2000-14-02
Adapter Kit 2000-500-02
Transducer 2000-6-02
Product Code
Description
2000-400-02
4 in 1 Transducer
(Shown)
2000-500-02
4 in 1 Transducer Adapter Kit
(Shown)
Product Code
Description
2000-4-02
Transducer Range 5 - 50 in. ozs. (Not Shown)
2000-50-1
Cable from MULTITEST/SURETEST to PC
2000-5-02
Transducer Range 15 - 200 in. ozs. (Not Shown)
2000-6-02
Transducer Range 4 - 50 in. lbs. (Shown)
2000-65-02
Transducer Range 15 - 150 in. lbs. (Not Shown)
Product Code
Description
2000-7-02
Transducer Range 30 - 400 in. lbs. (Not Shown)
2000-50-2
Cable from MULTITEST/SURETEST to external serial printer
2000-8-02
Transducer Range 80 - 1000 in. lbs. (Not Shown)
2000-10-02
Transducer Range 10 - 125 ft. lbs. (Not Shown)
2000-11-02
Transducer Range 20 - 250 ft. lbs. (Not Shown)
Product Code
Description
2000-12-02
Transducer Range 60 - 600 ft. lbs. (Not Shown)
2000-SW
PC Software
2000-13-02
Transducer Range 100 - 1000 ft. lbs. (Not Shown)
2000-14-02
Transducer Range 200 - 2000 ft. lbs. (Shown)
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
9
CALIBRATION EQUIPMENT
CALIBRATION EQUIPMENT
CDI’s calibration equipment is expressly designed
to calibrate the complete line of CDI Torque Transducers. All weight trays, arms and brackets supplied by CDI
Torque Products are built with precision accuracy to meet
the demanding needs of the calibration professional. All
calibration wheels and arms are certified as to length, and
supplied with a certificate of accuracy, which is traceable
to N.I.S.T. (National Institute of Standards and Technology). Weights, trays and hangers are weight certified and
are also supplied with a certificate of accuracy traceable
to N.I.S.T. Mating adapters are available to facilitate
the use of the various components. Written procedures
are available upon request for calibrating any of CDI’s
manufactured torque products.
TORQUE
TOOLS
CALIBRATION EQUIPMENT
Product Code
Description
390-2-2
4 oz. Weight Hanger
2000-301
8 oz. Weight Hanger
2000-304-0
7.5 lb. Weight Hanger
2000-302-0
15 lb. Weight Hanger
2000-303-0
50 lb. Weight Hanger
CALIBRATION
equipment
Weight Sets Itemized
Product Code
Description
2000-320-0
Weight Set #1 (not shown)
Qty
Consists of the following:
50 lb. Block Weight
8
20 lb. Block Weight
5
10 lb. Block Weight
4
5 lb. Slotted Weight
6
2 lb. Slotted Weight
4
1 lb. Slotted Weight
2
1
⁄2 lb. Slotted Weight
1
4 oz. Slotted Weight
1
2 oz. Slotted Weight
1
(For All Transducers)
Product Code
Description
2000-321-0
Weight Set #2 (not shown)
Qty
TORQUE TOOLS
Consists of the following:
CALIBRATION EQUIPMENT
Product Code
Description
2000-250-02
Calibration Stand Kit
50 lb. Block Weight
4
20 lb. Block Weight
4
10 lb. Block Weight
4
5 lb. Slotted Weight
6
2 lb. Slotted Weight
4
1 lb. Slotted Weight
2
1
⁄2 lb. Slotted Weight
1
4 oz. Slotted Weight
1
2 oz. Slotted Weight
1
(For 200 in. oz. to 600 ft. lbs.)
Product Code
Description
2000-322-0
Weight Set #3 (not shown)
Qty
Consists of the following:
Transducer mounting adapters included with stand.
10
50 lb. Block Weight
20 lb. Block Weight
5
10 lb. Block Weight
4
5 lb. Slotted Weight
2
2 lb. Slotted Weight
1
1 lb. Slotted Weight
1
(For 600 ft. lbs. to 2000 ft. lbs.)
Note: Weights not sold separately
8
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
11
CALIBRATION EQUIPMENT
CALIBRATION EQUIPMENT
CDI’s calibration equipment is expressly designed
to calibrate the complete line of CDI Torque Transducers. All weight trays, arms and brackets supplied by CDI
Torque Products are built with precision accuracy to meet
the demanding needs of the calibration professional. All
calibration wheels and arms are certified as to length, and
supplied with a certificate of accuracy, which is traceable
to N.I.S.T. (National Institute of Standards and Technology). Weights, trays and hangers are weight certified and
are also supplied with a certificate of accuracy traceable
to N.I.S.T. Mating adapters are available to facilitate
the use of the various components. Written procedures
are available upon request for calibrating any of CDI’s
manufactured torque products.
TORQUE
TOOLS
CALIBRATION EQUIPMENT
Product Code
Description
390-2-2
4 oz. Weight Hanger
2000-301
8 oz. Weight Hanger
2000-304-0
7.5 lb. Weight Hanger
2000-302-0
15 lb. Weight Hanger
2000-303-0
50 lb. Weight Hanger
CALIBRATION
equipment
Weight Sets Itemized
Product Code
Description
2000-320-0
Weight Set #1 (not shown)
Qty
Consists of the following:
50 lb. Block Weight
8
20 lb. Block Weight
5
10 lb. Block Weight
4
5 lb. Slotted Weight
6
2 lb. Slotted Weight
4
1 lb. Slotted Weight
2
1
⁄2 lb. Slotted Weight
1
4 oz. Slotted Weight
1
2 oz. Slotted Weight
1
(For All Transducers)
Product Code
Description
2000-321-0
Weight Set #2 (not shown)
Qty
TORQUE TOOLS
Consists of the following:
CALIBRATION EQUIPMENT
Product Code
Description
2000-250-02
Calibration Stand Kit
50 lb. Block Weight
4
20 lb. Block Weight
4
10 lb. Block Weight
4
5 lb. Slotted Weight
6
2 lb. Slotted Weight
4
1 lb. Slotted Weight
2
1
⁄2 lb. Slotted Weight
1
4 oz. Slotted Weight
1
2 oz. Slotted Weight
1
(For 200 in. oz. to 600 ft. lbs.)
Product Code
Description
2000-322-0
Weight Set #3 (not shown)
Qty
Consists of the following:
Transducer mounting adapters included with stand.
10
50 lb. Block Weight
20 lb. Block Weight
5
10 lb. Block Weight
4
5 lb. Slotted Weight
2
2 lb. Slotted Weight
1
1 lb. Slotted Weight
1
(For 600 ft. lbs. to 2000 ft. lbs.)
Note: Weights not sold separately
8
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
11
CALIBRATION EQUIPMENT
CALIBRATION EQUIPMENT
Master Transducer Component List
TORQUE
TOOLS
CALIBRATION EQUIPMENT
Figure 1
Product Code
Description
2000-152-3
1
2000-226-3
3
2000-226-2
1” x ⁄4” Sq. Drive Reducer
2000-0154-18
11⁄4” x 3⁄4” Sq. Drive Reducer
Figure 2
CALIBRATION
ACCESSORIES
⁄2” x 3⁄8” Sq. Drive Reducer
SOCKET
⁄4” x 1⁄2” Sq. Drive Reducer
SOCKET
3
TRANSDUCER
(for 600 ft. lbs. transducer)
S/2000-221-0
11⁄4” Flange Adapter
Product Code
Description
2500-50-0
21⁄2” Calibration Wheel, 1⁄4” Dr.
2000-151-0
5” Calibration Wheel, ⁄4” Dr.
2000-152-0
10” Butterfly Wheel, 1⁄2” Dr.
(Includes 3/8” drive adapter)
2000-154-0
40” Calibration Arm, 1 ⁄4” Dr.
(Includes 3/4” drive adapter)
TRANSDUCER
SMOOTH CUP
ADAPTER
SPLINE CUP
ADAPTER
Figure 3
1
1” x 3/4” SQUARE
ADAPTER
FLANGE
1
TRANSDUCER
Product Code
Description
342-35
Transducer Bracket, 5-1000 in. lbs.
342-36
Transducer Bracket, 125-600 ft. lbs.
SPLINE CUP
ADAPTER
Transducer Kits include all items listed below except brackets. Brackets sold separately.
CALIBRATION EQUIPMENT
TORQUE TOOLS
343-25
12
2000-150-03
Transducer Bracket, 4 in 1 / ETT
Transducer Bracket, 1000-2000 ft. lbs.
Transducer Kit
Product Code Range
Drive
Fig.
No.
Transducer
Socket
Cup
Adapter
Flange
Sq. Drive
Adapter
Bracket
2000-4-02
5-50 in. ozs.
1/4”
1
342-17-01
342-40
2000-225-5
none
none
342-35
2000-5-02
15-200 in. ozs.
1/4”
1
342-2-01
342-40
2000-225-5
none
none
342-35
342-35
2000-6-02
4-50 in. lbs.
1/4”
1
342-4-01
342-40
2000-225-5
none
none
2000-65-02
15-150 in. lbs.
1/4”
1
S/342-5-0
342-40
2000-225-5
none
none
342-35
2000-7-02
30-400 in. lbs.
3/8”
1
342-7-0
342-41-2
2000-225-5
none
none
342-35
2000-8-02
80-1000 in. lbs.
3/8”
1
342-9-0
342-41-2
2000-225-5
none
none
342-35
2000-10-02
10-125 ft. lbs.
1/2”
1
342-10-0
65-26-3
2000-225-4
none
none
342-36
2000-11-02
20-250 ft. lbs.
1/2”
1
342-11-0
65-26-3
2000-225-4
none
none
342-36
342-36
Product Code
Description
2000-12-02
60-600 ft. lbs.
3/4”
2
342-12-0
65-78-2
S/2000-225-4
none
none
2344-0050-03
Table Mounting Bracket for DTT Series Testers
2000-13-02
100-1000 ft. lbs.
1”
3
S/2000-13-0
none
S/2000-225-3
S/2000-219-2
2000-226-2 2000-150-03
2000-14-02
200-2000 ft. lbs.
1”
3
S/2000-14-0
none
S/2000-227-2
S/2000-219-2
2000-226-2 2000-150-03
Product Code
Description
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator / ETT
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator / ETT
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator / ETT
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
13
CALIBRATION EQUIPMENT
CALIBRATION EQUIPMENT
Master Transducer Component List
TORQUE
TOOLS
CALIBRATION EQUIPMENT
Figure 1
Product Code
Description
2000-152-3
1
2000-226-3
3
2000-226-2
1” x ⁄4” Sq. Drive Reducer
2000-0154-18
11⁄4” x 3⁄4” Sq. Drive Reducer
Figure 2
CALIBRATION
ACCESSORIES
⁄2” x 3⁄8” Sq. Drive Reducer
SOCKET
⁄4” x 1⁄2” Sq. Drive Reducer
SOCKET
3
TRANSDUCER
(for 600 ft. lbs. transducer)
S/2000-221-0
11⁄4” Flange Adapter
Product Code
Description
2500-50-0
21⁄2” Calibration Wheel, 1⁄4” Dr.
2000-151-0
5” Calibration Wheel, ⁄4” Dr.
2000-152-0
10” Butterfly Wheel, 1⁄2” Dr.
(Includes 3/8” drive adapter)
2000-154-0
40” Calibration Arm, 1 ⁄4” Dr.
(Includes 3/4” drive adapter)
TRANSDUCER
SMOOTH CUP
ADAPTER
SPLINE CUP
ADAPTER
Figure 3
1
1” x 3/4” SQUARE
ADAPTER
FLANGE
1
TRANSDUCER
Product Code
Description
342-35
Transducer Bracket, 5-1000 in. lbs.
342-36
Transducer Bracket, 125-600 ft. lbs.
SPLINE CUP
ADAPTER
Transducer Kits include all items listed below except brackets. Brackets sold separately.
CALIBRATION EQUIPMENT
TORQUE TOOLS
343-25
12
2000-150-03
Transducer Bracket, 4 in 1 / ETT
Transducer Bracket, 1000-2000 ft. lbs.
Transducer Kit
Product Code Range
Drive
Fig.
No.
Transducer
Socket
Cup
Adapter
Flange
Sq. Drive
Adapter
Bracket
2000-4-02
5-50 in. ozs.
1/4”
1
342-17-01
342-40
2000-225-5
none
none
342-35
2000-5-02
15-200 in. ozs.
1/4”
1
342-2-01
342-40
2000-225-5
none
none
342-35
342-35
2000-6-02
4-50 in. lbs.
1/4”
1
342-4-01
342-40
2000-225-5
none
none
2000-65-02
15-150 in. lbs.
1/4”
1
S/342-5-0
342-40
2000-225-5
none
none
342-35
2000-7-02
30-400 in. lbs.
3/8”
1
342-7-0
342-41-2
2000-225-5
none
none
342-35
2000-8-02
80-1000 in. lbs.
3/8”
1
342-9-0
342-41-2
2000-225-5
none
none
342-35
2000-10-02
10-125 ft. lbs.
1/2”
1
342-10-0
65-26-3
2000-225-4
none
none
342-36
2000-11-02
20-250 ft. lbs.
1/2”
1
342-11-0
65-26-3
2000-225-4
none
none
342-36
342-36
Product Code
Description
2000-12-02
60-600 ft. lbs.
3/4”
2
342-12-0
65-78-2
S/2000-225-4
none
none
2344-0050-03
Table Mounting Bracket for DTT Series Testers
2000-13-02
100-1000 ft. lbs.
1”
3
S/2000-13-0
none
S/2000-225-3
S/2000-219-2
2000-226-2 2000-150-03
2000-14-02
200-2000 ft. lbs.
1”
3
S/2000-14-0
none
S/2000-227-2
S/2000-219-2
2000-226-2 2000-150-03
Product Code
Description
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
3
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator / ETT
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator / ETT
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator / ETT
WARNING
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
13
Digital Torque TesterTM (DTT)
Sequential Process
The CDI Digital Torque TesterTM (DTT) utilizes the testing protocol
and standards developed by the American Society of Mechanical
Engineers (ASME) and is designed to be an affordable torque tester
that can be mounted on a wall or used in a bench-top vise to allow the
operator to conveniently test torque wrenches and torque screwdrivers. It features an easy to use touch pad screen to capture peak torque
values during a test in real time, and download stored torque data to
a PC. All DTT torque testers are sold in a kit with the complete tester,
hard carrying case, two socket driver reducer adapters and AC/DC
power supply.
TORQUE
TOOLS
TORQUE
TESTERS
FEATURES
• Integral Transducer and sturdy housing allow mounting in virtually
any position
• Integral Transducer: Full bridge strain gage, 350 ohm, 1500uE,
3mV/V F.S, 3.75 excitation
• Units of Torque: Nm, kgcm, ft.lb., in.lb., in-oz.
• Audible (tone)
• Torque Accuracy: ±0.5% ±1 count CW and CCW from 10 to 100%
of full scale at 25° C
• LCD Touch Screen: 4.7 in. color graphics display
• Screen resolution: 480 X 272 pixels
• Display Accuracy: 4 digits, 9999 cycle counts
• Six “AA” Alkaline cells for battery power included
• Track, Peak and First Peak modes of operation
• Operating Temperature: 40 to 110° F (5 to 42° C)
• Storage Temperature: 0 to 122° F (-20 to 50° C)
• Humidity up to 85% non-condensing
• EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese language manual
• ISO-6789-2003 and ASME B107-28-2005 standards compliant
• Certificate of N.I.S.T. traceability from 10% to 100% of full scale
• Includes storage case, AC adapter and USB cable
American Society of Mechanical Engineers (ASME) Emulation test of 20% / 60% / 100%
Sample torque data report from DTT
Portable, quick and accurate tester for all click wrenches.
TORQUE TOOLS
DIGITAL TORQUE TESTERS
Digital Torque Tester with optional table mounting bracket.
14
Product
Code
Square
Drive
Range
English
Range, Nm
Range,
kgcm
1001-O-DTT
1/4”
10 - 100 in.oz.
.07 - .706
.72 - 7.20
501-I-DTT
1/4”
5 - 50 in.lb.
.56 - 5.65
5.76 - 57.60
2502-I-DTT
3/8”
25 - 250 in.lb.
2.82 - 28.25
28.80 - 288.0
2503-F-DTT 1/2”
25 - 250 ft.lb.
33.90 - 338.9
345.6 - 3456
6004-F-DTT
3/4”
60 - 600 ft.lb.
81.35 - 813.5
829.5 - 8295
2344-0050-03
Table Mounting Bracket for DTT Series Testers
Accuracy:
Units of Measure:
Operation Modes:
Operating Temperature:
Storage Temperature:
Humidity:
Power Supply:
Data Storage/Recall:
± 0.50% ±1 count 10% to 100% CW &
CCW of indicated test value @ 25º C
Nm, kgcm, ft.lb., in.lb., in.oz.
TRACK, PEAK, FIRST PEAK
10 to 32º C (50 to 90º F)
-20 to 50º C (-2 to 122º F)
85% Relative Humidity @ 21º C (70º F)
Included 9-volt A/C D/C adapter. 6 AA
batteries included.
Memory Capacity – 500 Records
(Complete Check Mode Only.)
LCD Touch Screen
AC Adapter Port
USB Port
On / Off Switch
Perfect for checking dial torque wrenches.
WARNING
Product Code
Description
2344-0050-03
Table Mounting Bracket for DTT Series Testers
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
15
Digital Torque TesterTM (DTT)
Sequential Process
The CDI Digital Torque TesterTM (DTT) utilizes the testing protocol
and standards developed by the American Society of Mechanical
Engineers (ASME) and is designed to be an affordable torque tester
that can be mounted on a wall or used in a bench-top vise to allow the
operator to conveniently test torque wrenches and torque screwdrivers. It features an easy to use touch pad screen to capture peak torque
values during a test in real time, and download stored torque data to
a PC. All DTT torque testers are sold in a kit with the complete tester,
hard carrying case, two socket driver reducer adapters and AC/DC
power supply.
TORQUE
TOOLS
TORQUE
TESTERS
FEATURES
• Integral Transducer and sturdy housing allow mounting in virtually
any position
• Integral Transducer: Full bridge strain gage, 350 ohm, 1500uE,
3mV/V F.S, 3.75 excitation
• Units of Torque: Nm, kgcm, ft.lb., in.lb., in-oz.
• Audible (tone)
• Torque Accuracy: ±0.5% ±1 count CW and CCW from 10 to 100%
of full scale at 25° C
• LCD Touch Screen: 4.7 in. color graphics display
• Screen resolution: 480 X 272 pixels
• Display Accuracy: 4 digits, 9999 cycle counts
• Six “AA” Alkaline cells for battery power included
• Track, Peak and First Peak modes of operation
• Operating Temperature: 40 to 110° F (5 to 42° C)
• Storage Temperature: 0 to 122° F (-20 to 50° C)
• Humidity up to 85% non-condensing
• EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese language manual
• ISO-6789-2003 and ASME B107-28-2005 standards compliant
• Certificate of N.I.S.T. traceability from 10% to 100% of full scale
• Includes storage case, AC adapter and USB cable
American Society of Mechanical Engineers (ASME) Emulation test of 20% / 60% / 100%
Sample torque data report from DTT
Portable, quick and accurate tester for all click wrenches.
TORQUE TOOLS
DIGITAL TORQUE TESTERS
Digital Torque Tester with optional table mounting bracket.
14
Product
Code
Square
Drive
Range
English
Range, Nm
Range,
kgcm
1001-O-DTT
1/4”
10 - 100 in.oz.
.07 - .706
.72 - 7.20
501-I-DTT
1/4”
5 - 50 in.lb.
.56 - 5.65
5.76 - 57.60
2502-I-DTT
3/8”
25 - 250 in.lb.
2.82 - 28.25
28.80 - 288.0
2503-F-DTT 1/2”
25 - 250 ft.lb.
33.90 - 338.9
345.6 - 3456
6004-F-DTT
3/4”
60 - 600 ft.lb.
81.35 - 813.5
829.5 - 8295
2344-0050-03
Table Mounting Bracket for DTT Series Testers
Accuracy:
Units of Measure:
Operation Modes:
Operating Temperature:
Storage Temperature:
Humidity:
Power Supply:
Data Storage/Recall:
± 0.50% ±1 count 10% to 100% CW &
CCW of indicated test value @ 25º C
Nm, kgcm, ft.lb., in.lb., in.oz.
TRACK, PEAK, FIRST PEAK
10 to 32º C (50 to 90º F)
-20 to 50º C (-2 to 122º F)
85% Relative Humidity @ 21º C (70º F)
Included 9-volt A/C D/C adapter. 6 AA
batteries included.
Memory Capacity – 500 Records
(Complete Check Mode Only.)
LCD Touch Screen
AC Adapter Port
USB Port
On / Off Switch
Perfect for checking dial torque wrenches.
WARNING
Product Code
Description
2344-0050-03
Table Mounting Bracket for DTT Series Testers
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
15
MULTITORQ TORQUE & Data COLLECTION SYSTEMS
The MULTITORQ portable electronic torque meter displays torque
readings from sensors that attach between sockets and driver. MULTITORQ
is a highly versatile torque analyzer/data acquisition system that can be
used with sockets, extensions, universal joints, ratcheting drivers or any
combination of these. Sensors are sold separately, available in 8 ranges from
2-20 in. ozs. to 150-1500 ft. lb. Accuracy ± 1% of reading (± 2% reading for 20
in. oz., and 10 in. lb.) 10-100% of sensor range.
TORQUE
TOOLS
Data
Collectors
The torque analyzer features a wide angle viewing LCD display with selectable
readouts; ft. lb., in. lb., in. oz., Nm, dNm, mkg, and cmkg units. Torque target
settings are entered via a push button membrane keyboard. High and low
torque limits are adjustable to give an audible and visual alarm. The user
selects Track mode to display torque values as they are applied, or Peak mode
to display the highest torque value applied.
Headphone jack, on-off switch, and serial port for downloading to a PC.
Optional charger available for 220 Volt application.
FEATURES
• 4 digit w/ alpha & numerical function flags
• 4 digit, 8000 counts display capacity
• Accuracy: ± 1% of indicated value, cw & ccw, from 10% to
100% of full scale, 201-O-MT and 101-I-MT are ± 2%
• Soft touch keys: hi/lo alarm, zero tare, set-up, units, store/
recall/clear, send, statistics, enter
• Units of measurement: ft. lb., in. lb., in. oz., Nm, dNm, mkg
and cmkg
• Storage: -20 to 50 degrees C (-2 to 122 degrees F)
• Humidity: up to 90%, non-condensing
• Dimensions: 3” wide, 2.5” high (3” with belt clip), 6” deep
• Weight: 1 pound
• Charge life (full charge to shutoff): 20 hours continuous
• Battery chargers: 120 VAC or 220 VAC (50-60Hz)
• Output: 9VDC, 200mA
• Data storage/recall: 3500 measurements
• Serial output port: RS-232 (true), 300-19.2k baud, and
mitutoyo (statistical protocol)
• Rechargeable Ni-Cad batteries
• Reads bi-directionally (cw and ccw)
PC Statistical Analysis Output: Download histogram, minimum
and maximum reading, mean, sigma N, sigma, CP, Cpk, % error,
number of readings under and over tolerances.
MULTITORQ TORQUE & DATA COLLECTION SYSTEMS
Standard Set Includes:
Product Code Description
1600-MT
MULTITORQ Unit includes: power pack/charger (P115-30) and case (1600-50)
TORQUE TOOLS
Sensors: (sold separately)
Product Code
Torque Range
Drive
201-0-MT
2 - 20 in. oz.
1
101-I-MT
1 - 10 in. lb.
1
⁄4”
501-I-MT
5 - 50 in. lb.
1
2001-I-MT
20 - 200 in. lb.
1
1002-F-MT
10 - 100 ft. lb.
3
2503-F-MT
25 - 250 ft. lb.
1
6004-F-MT
60 - 600 ft. lb.
3
15005-F-MT
150 - 1500 ft. lb.
1”
⁄4”
⁄4”
⁄4”
⁄8”
⁄2”
⁄4”
Smart Sensors: “Plug-and-Play” built-in EEPROM memory chip that stores sensor identification and calibration factors. Factory calibrated, a sensor retains its accuracy with all
MULTITORQ meters.
Certificate of accuracy traceable to N.I.S.T. supplied with each transducer.
All components ordered separately.
Turns any ordinary ratchet wrench.....
Optional Accessories:
Product Code Description
1600-10
Interface Cable: RS-232 to serial printer
1600-20
Interface Cable: RS-232 to P.C.
82-66
220 Volt Charger
WARNING
...into a highly accurate digital torque tool.
16
Add suffix 220V for 220 volt applications.
From 2 in. ozs. all the way to 1500 ft. lbs., Multitorq fills all of
your torque needs.
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
17
MULTITORQ TORQUE & Data COLLECTION SYSTEMS
The MULTITORQ portable electronic torque meter displays torque
readings from sensors that attach between sockets and driver. MULTITORQ
is a highly versatile torque analyzer/data acquisition system that can be
used with sockets, extensions, universal joints, ratcheting drivers or any
combination of these. Sensors are sold separately, available in 8 ranges from
2-20 in. ozs. to 150-1500 ft. lb. Accuracy ± 1% of reading (± 2% reading for 20
in. oz., and 10 in. lb.) 10-100% of sensor range.
TORQUE
TOOLS
Data
Collectors
The torque analyzer features a wide angle viewing LCD display with selectable
readouts; ft. lb., in. lb., in. oz., Nm, dNm, mkg, and cmkg units. Torque target
settings are entered via a push button membrane keyboard. High and low
torque limits are adjustable to give an audible and visual alarm. The user
selects Track mode to display torque values as they are applied, or Peak mode
to display the highest torque value applied.
Headphone jack, on-off switch, and serial port for downloading to a PC.
Optional charger available for 220 Volt application.
FEATURES
• 4 digit w/ alpha & numerical function flags
• 4 digit, 8000 counts display capacity
• Accuracy: ± 1% of indicated value, cw & ccw, from 10% to
100% of full scale, 201-O-MT and 101-I-MT are ± 2%
• Soft touch keys: hi/lo alarm, zero tare, set-up, units, store/
recall/clear, send, statistics, enter
• Units of measurement: ft. lb., in. lb., in. oz., Nm, dNm, mkg
and cmkg
• Storage: -20 to 50 degrees C (-2 to 122 degrees F)
• Humidity: up to 90%, non-condensing
• Dimensions: 3” wide, 2.5” high (3” with belt clip), 6” deep
• Weight: 1 pound
• Charge life (full charge to shutoff): 20 hours continuous
• Battery chargers: 120 VAC or 220 VAC (50-60Hz)
• Output: 9VDC, 200mA
• Data storage/recall: 3500 measurements
• Serial output port: RS-232 (true), 300-19.2k baud, and
mitutoyo (statistical protocol)
• Rechargeable Ni-Cad batteries
• Reads bi-directionally (cw and ccw)
PC Statistical Analysis Output: Download histogram, minimum
and maximum reading, mean, sigma N, sigma, CP, Cpk, % error,
number of readings under and over tolerances.
MULTITORQ TORQUE & DATA COLLECTION SYSTEMS
Standard Set Includes:
Product Code Description
1600-MT
MULTITORQ Unit includes: power pack/charger (P115-30) and case (1600-50)
TORQUE TOOLS
Sensors: (sold separately)
Product Code
Torque Range
Drive
201-0-MT
2 - 20 in. oz.
1
101-I-MT
1 - 10 in. lb.
1
⁄4”
501-I-MT
5 - 50 in. lb.
1
2001-I-MT
20 - 200 in. lb.
1
1002-F-MT
10 - 100 ft. lb.
3
2503-F-MT
25 - 250 ft. lb.
1
6004-F-MT
60 - 600 ft. lb.
3
15005-F-MT
150 - 1500 ft. lb.
1”
⁄4”
⁄4”
⁄4”
⁄8”
⁄2”
⁄4”
Smart Sensors: “Plug-and-Play” built-in EEPROM memory chip that stores sensor identification and calibration factors. Factory calibrated, a sensor retains its accuracy with all
MULTITORQ meters.
Certificate of accuracy traceable to N.I.S.T. supplied with each transducer.
All components ordered separately.
Turns any ordinary ratchet wrench.....
Optional Accessories:
Product Code Description
1600-10
Interface Cable: RS-232 to serial printer
1600-20
Interface Cable: RS-232 to P.C.
82-66
220 Volt Charger
WARNING
...into a highly accurate digital torque tool.
16
Add suffix 220V for 220 volt applications.
From 2 in. ozs. all the way to 1500 ft. lbs., Multitorq fills all of
your torque needs.
• Do not exceed rated torque.
• Periodic recalibration is necessary to maintain accuracy.
• Do not use a torque wrench to break fasteners loose.
• Frequently inspect, clean and lubricate ratchet mechanism with light oil.
17
DIGITAL POWER TORQUE MULTIPLIERS - DPT SERIES
Torque FACTS
The CDI Model DPT series of torque multipliers are constructed of a two piece
aluminum housing, special gear train, a stainless steel reaction device and a digital
torque display. The display measures output torque directly in foot pounds when the
load is reacted through the two pins on the output side of the housing. This reaction
force is transferred to the electronics, which in turn sends the signal to the digital
display for precise torque readings to the nearest foot pound. An adapter is required
to interface with the application.
TORQUE
TOOLS
Electronic Torque Tester Information
Issues to consider when selecting an electronic
torque tester:
1 Accuracy: Generally there are two ways of stating
accuracy:
FEATURES
A. % of full-scale deflection or FSD
B. % of indicated value or reading
• Digital readout
• Accuracy: ± 2% of indicated value, cw and ccw,  
from 10% to 100% of full scale
• Easy zero adjust
• Powered by a 9 volt battery
• Balanced precision gear train
• Heavy duty pawl ratchet for quick and easy alignment
• Side loading eliminated
• Zero back-lash
• Indicates fastener relaxation to nearest foot pound
• Accurate from -25 to 120 degrees Fahrenheit
The following example will show the difference between the
two methods:
Case 1 - Assume you have a 100 ft. lb. tester (maximum), and
that the stated accuracy is +/- 0.5% of full scale.
At 100 ft. lb. +/- 0.5% full scale error = .5 ft, lb. This represents
the “best case” error of the system. However, when a lower
range is utilized, this .5 ft-lb becomes more significant. That is,
on the same 100 ft. lb. tester;
at 50 ft. lb. - .5 ft. lb. error = 1% accuracy
at 10 ft, lb. - .5 ft. lb. error = 5% accuracy
at 1 ft. lb. - .5 ft. lb. error = 50% accuracy
Furthermore, transducers which are used to convert the
mechanical torque into an electrical signal may become
inconsistent below 10% of full-scale deflection.
Torque FACTS
It is for the above stated reason that systems which have
accuracy as related to indicated value should state the useful
range to be 10% to 100% of the tester range.
Therefore, if a tester has 100 ft. lb. maximum range, it should
not be used at less than 10 ft. lbs. if the desired accuracy is
needed.
It is CDI’s belief that in order to be completely honest to the
customer, accuracy should always be stated as a percent of
indicated value and the useful range should correspond to
that stated accuracy. This will prevent the user from having to
calculate what the
real error is at any given range.
3 Circuitry: There are two basic ways of measuring the
output of a torque transducer.
1. Analog (non-microprocessor based pure analog)
Therefore, what looks to be a good accuracy reading at fullscale actually translates into substantial error at the low range
of the tester.
Case 2 - Assume you have a 100 ft. lb. tester (maximum),
and that the stated accuracy is +/- 0.5% of indicated
value.
TORQUE TOOLS
at 100 ft. lb. - .5% error .5 ft. lb.
at 50 ft. lb. - .5 % error .25 ft. lb.
at 10 ft. lb. - .5% error .05 ft. lb.
As can be seen by the above examples, error as related to
full-scale value increases significantly as you go lower in the
range, while error as related to indicated value stays constant
throughout the useful range of the tester.
Part Number TRB1200
Reaction Arm for DPT1200
(Sold Separately)
2 Range: Generally when manufacturers advertise % error
of full-scale, their useful ranges will be advertised from zero
to full-scale. That is, +/- 0.5% accurate (full-scale) from 0-100
ft. lb. This is interesting because at zero ft. lb., the system is
only accurate to within +/- 0.5 ft. lb. Basically, error goes to
infinity at zero.
DIGITAL POWER TORQUE MULTIPLIERS - DPT SERIES
Part Number Capacity
Incr.
Size
DPT1200
0-1200 ft. lb. 1 ft. lb.
Wt. Lbs.
9 ⁄4” W
20 lbs.
65⁄8” H
51⁄16” D
1
DPT2500
0-2500 ft. lb. 1 ft. lb.
11” W
38 lbs.
8” H
61⁄4” D
1200 KIT contains - carrying case, output shaft and crank handle.
2500 KIT contains - carrying case, output shaft and crank handle.
18
Input
Output
3
⁄8” female with
⁄8” sq. drive
supplied
⁄4” sq. female with
6” long 3⁄4” sq.
male drive supplied
⁄8” female with
⁄8” sq. drive
supplied
1” sq. female with
8” long 1” sq.
male drive supplied
3
3
3
2. Digital (microprocessor based plus analog input)
Without in-depth explanations of these two systems, the
following advantages of having digital circuitry are well known
throughout the electronics industry.
1. Digital systems are economical, flexible and
compact.
2. Digital systems improve reliability in the face of
hardware imperfections.
3. Digital systems allow the ability to make logical
decisions, carry out digital computations (unlimited
unit conversion) and store the results in memory.
Basically, full digital systems are computer controlled. It is
important that the terms “digital display” or “digital memory”
do not necessarily mean that the system has full digital
circuitry.
3
19
Torque FACTS
repair & service center
Electronic
FORMULA
FOR
Torque
CALCULATING
Tester ADDITION
Information
OF AN ADAPTER TO A TORQUE WRENCH
Formula:
TA x L
L+A
= TW
For over 30 years the CDI Repair and Service Center has been
providing quality torque tool repair and calibration services
performed by highly trained technicians. CDI Torque Products
is a premier torque wrench and torque calibration equipment
manufacturer that has been ISO 9001 certified since 1998.
Mechanical torque tools and electronic torque equipment are
designed, built and serviced in our City of Industry, California
facility. CDI’s mechanical and electronic torque tools are
repaired and calibrated with N.I.S.T. (National Institute of
Standards and Technology) traceable calibration equipment. CDI
Torque Products meets or exceeds ASME and ISO standards.
All of CDI’s primary torque wrench calibration equipment used
in manufacturing and repair are calibrated on a monthly basis
— that’s twelve times a year!!
TORQUE
TOOLS
Certified
SErvice/
warranty
In addition to repair and calibration services, CDI offers training
in several areas. Technical training is available at our
facility for any CDI manufactured torque calibration
system. Training in mechanical and electronic torque wrench
repair, torque theory, torque basics and safety training is also
available.
Length (L ) =
Dial Wrenches =
Micrometer
Wrenches =
Desired
Torque ( TA ) =
Added Length
of Adapter ( A ) =
TORQUE TOOLS
New Setting ( TW ) =
Example:
The measured distance from the center of the square drive to the center
ring or notch on the handle.
All electronic torque checking, testing and calibration equipment
sent to CDI for servicing is returned to factory standards and a
certificate of calibration is provided at no extra cost. Rely on the
CDI Repair and Service Center to do the job right the first time.
The measured length from the center of the square drive to the center of
the handle, with the wrench set at the desired torque reading.
MECHANICAL AND ELECTRONIC TORQUE PRODUCTS FULL 12-MONTH WARRANTY
The torque value designated for the fastener with or without an adapter.
The measured length from the center of the adapter drive to the center of
the wrench square drive.
The torque setting on the wrench allowing for the added length of the
adapter. This reading will be lower than the desired torque.
250 ft. lb. Dial Wrench using a 2” long crowfoot adapter
L = Effective Length: 18.75”
Desired Torque = 250 ft. lb.
Length of Adapter = 2”
Result:
20
Effective length of the wrench as described below.
18.75” x 250 ft. lb.
18.75” + 2”
CDI TORQUE PRODUCTS WARRANTS TO THE ORIGINAL PURCHASER OF TORQUE PRODUCTS THAT THE COMPANY’S
TORQUE PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. CDI TORQUE PRODUCTS will repair
or replace torque products which fail to give satisfactory service due to defective workmanship or materials (excluding calibration)
for 12 months from the date of original purchase. CDI TORQUE PRODUCTS warrants “initial, out of box calibration” of each new,
unused torque product. Repair, replacement or recalibration shall be at the election and expense of CDI TORQUE PRODUCTS,
and is your exclusive remedy in place of all other rights and remedies. Products must be returned with proof of purchase, freight
prepaid, to a CDI TORQUE PRODUCTS repair center for warranty service. CDI TORQUE PRODUCTS does not provide any
warranty for products subjected to abnormal use. Abnormal use includes misuse, accident, modification, unreasonable use, neglect,
lack of maintenance, or use after the tool is significantly worn.
“NO OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY, AND ALL SUCH WARRANTIES ARE HEREBY
EXPRESSLY EXCLUDED.”
In no event shall Seller be liable to Buyer or anyone claiming through or against Buyer for any special, indirect or consequential
damages (including, without limitation, lost profits, revenues, anticipated sales, business opportunities or goodwill; interruption of
business; or loss of business information).
= Pull Wrench to 226 ft. lb.
2121
Torque FACTS
repair & service center
Electronic
FORMULA
FOR
Torque
CALCULATING
Tester ADDITION
Information
OF AN ADAPTER TO A TORQUE WRENCH
Formula:
TA x L
L+A
= TW
For over 30 years the CDI Repair and Service Center has been
providing quality torque tool repair and calibration services
performed by highly trained technicians. CDI Torque Products
is a premier torque wrench and torque calibration equipment
manufacturer that has been ISO 9001 certified since 1998.
Mechanical torque tools and electronic torque equipment are
designed, built and serviced in our City of Industry, California
facility. CDI’s mechanical and electronic torque tools are
repaired and calibrated with N.I.S.T. (National Institute of
Standards and Technology) traceable calibration equipment. CDI
Torque Products meets or exceeds ASME and ISO standards.
All of CDI’s primary torque wrench calibration equipment used
in manufacturing and repair are calibrated on a monthly basis
— that’s twelve times a year!!
TORQUE
TOOLS
Certified
SErvice/
warranty
In addition to repair and calibration services, CDI offers training
in several areas. Technical training is available at our
facility for any CDI manufactured torque calibration
system. Training in mechanical and electronic torque wrench
repair, torque theory, torque basics and safety training is also
available.
Length (L ) =
Dial Wrenches =
Micrometer
Wrenches =
Desired
Torque ( TA ) =
Added Length
of Adapter ( A ) =
TORQUE TOOLS
New Setting ( TW ) =
Example:
The measured distance from the center of the square drive to the center
ring or notch on the handle.
All electronic torque checking, testing and calibration equipment
sent to CDI for servicing is returned to factory standards and a
certificate of calibration is provided at no extra cost. Rely on the
CDI Repair and Service Center to do the job right the first time.
The measured length from the center of the square drive to the center of
the handle, with the wrench set at the desired torque reading.
MECHANICAL AND ELECTRONIC TORQUE PRODUCTS FULL 12-MONTH WARRANTY
The torque value designated for the fastener with or without an adapter.
The measured length from the center of the adapter drive to the center of
the wrench square drive.
The torque setting on the wrench allowing for the added length of the
adapter. This reading will be lower than the desired torque.
250 ft. lb. Dial Wrench using a 2” long crowfoot adapter
L = Effective Length: 18.75”
Desired Torque = 250 ft. lb.
Length of Adapter = 2”
Result:
20
Effective length of the wrench as described below.
18.75” x 250 ft. lb.
18.75” + 2”
CDI TORQUE PRODUCTS WARRANTS TO THE ORIGINAL PURCHASER OF TORQUE PRODUCTS THAT THE COMPANY’S
TORQUE PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. CDI TORQUE PRODUCTS will repair
or replace torque products which fail to give satisfactory service due to defective workmanship or materials (excluding calibration)
for 12 months from the date of original purchase. CDI TORQUE PRODUCTS warrants “initial, out of box calibration” of each new,
unused torque product. Repair, replacement or recalibration shall be at the election and expense of CDI TORQUE PRODUCTS,
and is your exclusive remedy in place of all other rights and remedies. Products must be returned with proof of purchase, freight
prepaid, to a CDI TORQUE PRODUCTS repair center for warranty service. CDI TORQUE PRODUCTS does not provide any
warranty for products subjected to abnormal use. Abnormal use includes misuse, accident, modification, unreasonable use, neglect,
lack of maintenance, or use after the tool is significantly worn.
“NO OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY, AND ALL SUCH WARRANTIES ARE HEREBY
EXPRESSLY EXCLUDED.”
In no event shall Seller be liable to Buyer or anyone claiming through or against Buyer for any special, indirect or consequential
damages (including, without limitation, lost profits, revenues, anticipated sales, business opportunities or goodwill; interruption of
business; or loss of business information).
= Pull Wrench to 226 ft. lb.
2121
TORQUE TOOLS
INDEX
22
Product Code
Description
Page
Product Code
Description
Page
1001-O-DTT
1
⁄4”, 10 - 100 in.oz. Digital Torque Tester
14
2000-65-02
Transducer Kit-Range 15-150 in. lb.
8,13
1002-F-MT
3
⁄8” drive, 10-100 ft. lb. Multitorq Sensor
16
2000-7-02
Transducer Kit-Range 30-400 in. lb.
8,13
101-I-MT
1
⁄4” drive, 1-10 in. lb. Multitorq Sensor
16
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-02 Loader
9
15005-F-MT
1” drive, 150-1500 ft. lb. Multitorq Sensor
16
2000-750-06
Torque Screwdriver Testing Kit for 600TL2 Loader
9
1600-10
Multitorq Interface Cable to Serial Printer
16
2000-8-02
Transducer Kit-Range 80-1000 in. lb.
8,13
1600-20
Multitorq Interface Cable RS-232 to PC
16
2000-SW
Wedgelink Software
9
1600-MT
Multitorq Meter w/Case and Charger
16
2001-I-MT
1
⁄4” drive, 20-200 in. lb. Multitorq Sensor
16
2000-0154-18
11⁄4” x 3⁄4” Calibration Arm Adapter
12
201-0-MT
1
⁄4” drive, 2-20 in. oz. Multitorq Sensor
16
2000-1
Multitest Premier Calibration System
3
2344-0050-03
Table Mounting Bracket for DTT Series Testers
12, 14, 15
2000-10-02
Transducer Kit-Range 10-125 ft. lb.
8,13
2500-50-0
2 ⁄2” Calibration Wheel
12
2000-11-02
Transducer Kit-Range 20-250 ft. lb.
8,13
2502-I-DTT
3
⁄8” drive, 25-250 in. lb. Digital Torque Tester
14
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
8,13
2503-F-DTT
1
⁄2” drive, 25-250 ft. lb. Digital Torque Tester
14
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
8,13
2503-F-MT
1
⁄2” drive, 25-250 ft. lb. Multitorq Sensor
16
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
8,13
260-27
1
⁄4” hex x ⁄4” sq. Socket Adapter
8
2000-100-02
Roller/Storage Cabinet 45”W x 24”D x 33”H 8
2800-1
Multitest Motorized System
5
2000-150-03
Transducer Bracket, 1000-2000 ft.lb.
12
342-35
Transducer Mounting Bracket up to 1000 in. lb. (TB342/1)
12
2000-151-0
5” Calibration Wheel
12
342-36
Transducer Mounting Bracket 125-600 ft. lb. (TB342/2)
12
2000-152-0
10” Butterfly Calibration Wheel
12
342-40
1
⁄4” sq. x ⁄4” sq. Socket Adapter
8
2000-152-3
1
⁄2” X 3⁄8” Calibration Arm Adapter
12
342-41-1
1
⁄4” sq. x 3⁄8” sq. Socket Adapter
8
2000-154-0
40” Calibration Arm
12
342-41-2
3
⁄8” sq. x 3⁄8” sq. Socket Adapter
8
2000-2
Multitest Supreme Calibration System
4
343-25
Transducer Bracket, 4 in 1 / ETT
12
1
1
1
2000-226-2
1” x ⁄4” Calibration Arm Adapter
12
390-2-2
4 oz. Hanger Calibration Weight
11
2000-226-3
3
⁄4” x 1⁄2” Sq. Drive Reducer
12
5000-1
Suretest Premier Calibration System
6
2000-250-02
Calibration Stand Kit
10
5000-2
Suretest Supreme Calibration System
7
2000-260-0
Force Tensiometer Testing Kit 10 Cables 1⁄16” to 3⁄8”
9
5000-3
Suretest Basic Calibration System
7
2000-261-0
Force Tension Gage Kit
9
5000-ST
Suretest Monitor w/Cable and Case
8
2000-262-0
Force Compression Gage Kit
9
501-I-DTT
1
⁄4” drive, 5-50 in. lb. Digital Torque Tester
14
2000-263-02
Force Arm Kit-Small and Large Arms
9
501-I-MT
1
⁄4” drive, 5-50 in. lb. Multitorq Sensor
16
2000-3
Multitest Basic Calibration System
4
6004-F-DTT
3
⁄4” drive, 60-600 ft. lb. Digital Torque Tester
14
2000-301
8 oz. Hanger Calibration Weight
11
6004-F-MT
3
⁄4” drive, 60-600 ft. lb. Multitorq Sensor
16
2000-302-0
15 lb. Calibration Weight Tray
11
600TL2
Mechanical Loader 600 ft. lb.
8
2000-303-0
50 lb. Calibration Weight Tray
11
65-26-2
1
⁄2” sq. x 3⁄8” sq. Socket Adapter
8
2000-304-0
7.5 lb. Calibration Weight Tray
11
65-26-3
1
⁄2” sq. x 1⁄2” sq. Socket Adapter
8
2000-320-0
Weight Set #1
11
65-78-1
1
⁄2” sq. x ⁄4” sq. Socket Adapter
8
2000-321-0
Weight Set #2
11
65-78-2
3
⁄4” sq. x 3⁄4” sq. Socket Aadapter
8
2000-322-0
Weight Set #3
11
75-20
1” sq. x 1” sq. Socket Aadapter
8
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
8
75-25-1
1” sq. x 3⁄4” sq. Socket Adapter
8
2000-4-02
Transducer Kit-Range 5-50 in. oz.
8,13
82-66
220 Volt Charger
16
2000-500-02
4 in 1 Transducer Adapter Kit
8
900-0-1KIT
1
2000-50-1
Cable from Multitest to PC
9
900-2-01KIT
3
2000-5-02
Transducer Kit-Range 15-200 in. oz.
8,13
900-3-01KIT
2000-50-2
Cable from Multitest to External Serial Printer
9
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
9
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-6-02
2000-610-02
3
3
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
12
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
12
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
12
DPT1200
1200 ft.lb. Digital Torque Multiplier
18
DPT2500
2500 ft.lb. Digital Torque Multiplier
18
8
P113-50
Computorq to 9 pin PC Download Cable
2
Transducer Kit-Range 4-50 in. lb.
8,13
P113-60
Computorq to 25 pin Printer Download Cable
2
Multitest Digital Monitor
8
TRB1200
Torque Reaction Bar
18
S/2000-221-0
11⁄4” x 3⁄4” Adapter for 40” Arm
12
TORQUE
TOOLS
index
2323
TORQUE TOOLS
INDEX
22
Product Code
Description
Page
Product Code
Description
Page
1001-O-DTT
1
⁄4”, 10 - 100 in.oz. Digital Torque Tester
14
2000-65-02
Transducer Kit-Range 15-150 in. lb.
8,13
1002-F-MT
3
⁄8” drive, 10-100 ft. lb. Multitorq Sensor
16
2000-7-02
Transducer Kit-Range 30-400 in. lb.
8,13
101-I-MT
1
⁄4” drive, 1-10 in. lb. Multitorq Sensor
16
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-02 Loader
9
15005-F-MT
1” drive, 150-1500 ft. lb. Multitorq Sensor
16
2000-750-06
Torque Screwdriver Testing Kit for 600TL2 Loader
9
1600-10
Multitorq Interface Cable to Serial Printer
16
2000-8-02
Transducer Kit-Range 80-1000 in. lb.
8,13
1600-20
Multitorq Interface Cable RS-232 to PC
16
2000-SW
Wedgelink Software
9
1600-MT
Multitorq Meter w/Case and Charger
16
2001-I-MT
1
⁄4” drive, 20-200 in. lb. Multitorq Sensor
16
2000-0154-18
11⁄4” x 3⁄4” Calibration Arm Adapter
12
201-0-MT
1
⁄4” drive, 2-20 in. oz. Multitorq Sensor
16
2000-1
Multitest Premier Calibration System
3
2344-0050-03
Table Mounting Bracket for DTT Series Testers
12, 14, 15
2000-10-02
Transducer Kit-Range 10-125 ft. lb.
8,13
2500-50-0
2 ⁄2” Calibration Wheel
12
2000-11-02
Transducer Kit-Range 20-250 ft. lb.
8,13
2502-I-DTT
3
⁄8” drive, 25-250 in. lb. Digital Torque Tester
14
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
8,13
2503-F-DTT
1
⁄2” drive, 25-250 ft. lb. Digital Torque Tester
14
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
8,13
2503-F-MT
1
⁄2” drive, 25-250 ft. lb. Multitorq Sensor
16
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
8,13
260-27
1
⁄4” hex x ⁄4” sq. Socket Adapter
8
2000-100-02
Roller/Storage Cabinet 45”W x 24”D x 33”H 8
2800-1
Multitest Motorized System
5
2000-150-03
Transducer Bracket, 1000-2000 ft.lb.
12
342-35
Transducer Mounting Bracket up to 1000 in. lb. (TB342/1)
12
2000-151-0
5” Calibration Wheel
12
342-36
Transducer Mounting Bracket 125-600 ft. lb. (TB342/2)
12
2000-152-0
10” Butterfly Calibration Wheel
12
342-40
1
⁄4” sq. x ⁄4” sq. Socket Adapter
8
2000-152-3
1
⁄2” X 3⁄8” Calibration Arm Adapter
12
342-41-1
1
⁄4” sq. x 3⁄8” sq. Socket Adapter
8
2000-154-0
40” Calibration Arm
12
342-41-2
3
⁄8” sq. x 3⁄8” sq. Socket Adapter
8
2000-2
Multitest Supreme Calibration System
4
343-25
Transducer Bracket, 4 in 1 / ETT
12
1
1
1
2000-226-2
1” x ⁄4” Calibration Arm Adapter
12
390-2-2
4 oz. Hanger Calibration Weight
11
2000-226-3
3
⁄4” x 1⁄2” Sq. Drive Reducer
12
5000-1
Suretest Premier Calibration System
6
2000-250-02
Calibration Stand Kit
10
5000-2
Suretest Supreme Calibration System
7
2000-260-0
Force Tensiometer Testing Kit 10 Cables 1⁄16” to 3⁄8”
9
5000-3
Suretest Basic Calibration System
7
2000-261-0
Force Tension Gage Kit
9
5000-ST
Suretest Monitor w/Cable and Case
8
2000-262-0
Force Compression Gage Kit
9
501-I-DTT
1
⁄4” drive, 5-50 in. lb. Digital Torque Tester
14
2000-263-02
Force Arm Kit-Small and Large Arms
9
501-I-MT
1
⁄4” drive, 5-50 in. lb. Multitorq Sensor
16
2000-3
Multitest Basic Calibration System
4
6004-F-DTT
3
⁄4” drive, 60-600 ft. lb. Digital Torque Tester
14
2000-301
8 oz. Hanger Calibration Weight
11
6004-F-MT
3
⁄4” drive, 60-600 ft. lb. Multitorq Sensor
16
2000-302-0
15 lb. Calibration Weight Tray
11
600TL2
Mechanical Loader 600 ft. lb.
8
2000-303-0
50 lb. Calibration Weight Tray
11
65-26-2
1
⁄2” sq. x 3⁄8” sq. Socket Adapter
8
2000-304-0
7.5 lb. Calibration Weight Tray
11
65-26-3
1
⁄2” sq. x 1⁄2” sq. Socket Adapter
8
2000-320-0
Weight Set #1
11
65-78-1
1
⁄2” sq. x ⁄4” sq. Socket Adapter
8
2000-321-0
Weight Set #2
11
65-78-2
3
⁄4” sq. x 3⁄4” sq. Socket Aadapter
8
2000-322-0
Weight Set #3
11
75-20
1” sq. x 1” sq. Socket Aadapter
8
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
8
75-25-1
1” sq. x 3⁄4” sq. Socket Adapter
8
2000-4-02
Transducer Kit-Range 5-50 in. oz.
8,13
82-66
220 Volt Charger
16
2000-500-02
4 in 1 Transducer Adapter Kit
8
900-0-1KIT
1
2000-50-1
Cable from Multitest to PC
9
900-2-01KIT
3
2000-5-02
Transducer Kit-Range 15-200 in. oz.
8,13
900-3-01KIT
2000-50-2
Cable from Multitest to External Serial Printer
9
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80”
9
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-6-02
2000-610-02
3
3
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
12
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
12
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
12
DPT1200
1200 ft.lb. Digital Torque Multiplier
18
DPT2500
2500 ft.lb. Digital Torque Multiplier
18
8
P113-50
Computorq to 9 pin PC Download Cable
2
Transducer Kit-Range 4-50 in. lb.
8,13
P113-60
Computorq to 25 pin Printer Download Cable
2
Multitest Digital Monitor
8
TRB1200
Torque Reaction Bar
18
S/2000-221-0
11⁄4” x 3⁄4” Adapter for 40” Arm
12
TORQUE
TOOLS
index
2323
warranty stations
United States
CDI Torque Products
a Snap-on® company
19220 San Jose Avenue
City of Industry, CA 91748
Phone: (626) 965-0668
Fax: (626) 965-2410
E-Mail: sales@cditorque.com
Web Site: www.cditorque.com
TORQUE
TOOLS
INDEX
CDI Torque Products is a brand of Snap-on Specialty Tools and offers a
complete product offering of Electronic and Mechanical Torque Tools to
request your catalog please go to www.cditorqueproducts.com or call
the sales department at 626-965-0668.
United States
Team Torque, Inc.
A2LA Accredited to ISO 17025
2910 E. Broadway #24
Bismarck, ND 58501
Phone: 701.223.4552 or 888.682.8675
Fax: 701.222.3731
E-Mail: service@teamtorque.com
United States
Angle Repair
175 Angle Drive
Beckley, WV 25801
Phone: 304.253.5729
Fax: 304.252.0481
E-Mail: estimate@anglerepair.com
TORQUE TOOLS
Canada
Etaltech
587 Adanac
Beauport, Quebec
Canada G1C 7G6
Phone: 418.660.6081
Fax: 418.660.6554
E-Mail: etaltech@qc.aira.com
Mexico
Arjessiger de Mexico, S.A. de C.V.
PH: 01 (800) 522.22.65
PH: 01 (800) 228.11.44
PH: 011 (52) 553.91.06.65
PH: 011 (52) 553.91.07.49
FAX: 011 (52) 553.91.51.87
E-Mail: ventas@arjessiger.com
Standards & Specifications that Snap-on Specialty Tools manufacture to:
ISO 9001-2000 - Quality System
Certified by Det Norske Veritas
Certificate # CERT- 08745 - 2006 - AQ - HOU - ANAB
www.cditorque.com
Complete Catalog information may be found on our new website along with:
• Distributor Locator
• Interactive Torque Conversion Charts
• Catalog PDF Downloads
ISO 14001-2000 - Environmental System
Certified by Det Norske Veritas
Certificate # CERT- 02711 - 2006 - AE - HOU - ANAB
Occupational Health and Safety Assessment Series 18001: 1999 Edition - Safety System
Certified by Det Norske Veritas
Certificate # CERT- 03904 - 2006 -SOC - HOU - ANAB
ASME B107.28 - 2005 - Electronic Torque Instruments
• Service and Support
• Contact Information
• Events
Visit us online at www.cditorque.com!
ASME B107.29 - 2005 - Electronic Testers and Hand Torque Tools
US Air Force / Navy requirements for NSN # 6635 - 01 - 327 - 4461 - Multitest Calibration System (TFC2000 - 0 - 03)
CDI is a member of HTI and sits on the ASME Committee on Torque Instruments and NCSL International Metrology Group.
25
24
© 2010 CDI Torque Products, A Snap-on Specialty Tools Brand, City of Industry, CA • All Rights Reserved
warranty stations
United States
CDI Torque Products
a Snap-on® company
19220 San Jose Avenue
City of Industry, CA 91748
Phone: (626) 965-0668
Fax: (626) 965-2410
E-Mail: sales@cditorque.com
Web Site: www.cditorque.com
TORQUE
TOOLS
INDEX
CDI Torque Products is a brand of Snap-on Specialty Tools and offers a
complete product offering of Electronic and Mechanical Torque Tools to
request your catalog please go to www.cditorqueproducts.com or call
the sales department at 626-965-0668.
United States
Team Torque, Inc.
A2LA Accredited to ISO 17025
2910 E. Broadway #24
Bismarck, ND 58501
Phone: 701.223.4552 or 888.682.8675
Fax: 701.222.3731
E-Mail: service@teamtorque.com
United States
Angle Repair
175 Angle Drive
Beckley, WV 25801
Phone: 304.253.5729
Fax: 304.252.0481
E-Mail: estimate@anglerepair.com
TORQUE TOOLS
Canada
Etaltech
587 Adanac
Beauport, Quebec
Canada G1C 7G6
Phone: 418.660.6081
Fax: 418.660.6554
E-Mail: etaltech@qc.aira.com
Mexico
Arjessiger de Mexico, S.A. de C.V.
PH: 01 (800) 522.22.65
PH: 01 (800) 228.11.44
PH: 011 (52) 553.91.06.65
PH: 011 (52) 553.91.07.49
FAX: 011 (52) 553.91.51.87
E-Mail: ventas@arjessiger.com
Standards & Specifications that Snap-on Specialty Tools manufacture to:
ISO 9001-2000 - Quality System
Certified by Det Norske Veritas
Certificate # CERT- 08745 - 2006 - AQ - HOU - ANAB
www.cditorque.com
Complete Catalog information may be found on our new website along with:
• Distributor Locator
• Interactive Torque Conversion Charts
• Catalog PDF Downloads
ISO 14001-2000 - Environmental System
Certified by Det Norske Veritas
Certificate # CERT- 02711 - 2006 - AE - HOU - ANAB
Occupational Health and Safety Assessment Series 18001: 1999 Edition - Safety System
Certified by Det Norske Veritas
Certificate # CERT- 03904 - 2006 -SOC - HOU - ANAB
ASME B107.28 - 2005 - Electronic Torque Instruments
• Service and Support
• Contact Information
• Events
Visit us online at www.cditorque.com!
ASME B107.29 - 2005 - Electronic Testers and Hand Torque Tools
US Air Force / Navy requirements for NSN # 6635 - 01 - 327 - 4461 - Multitest Calibration System (TFC2000 - 0 - 03)
CDI is a member of HTI and sits on the ASME Committee on Torque Instruments and NCSL International Metrology Group.
25
24
© 2010 CDI Torque Products, A Snap-on Specialty Tools Brand, City of Industry, CA • All Rights Reserved
19220 san jose avenue • city of industry, ca 91748 • usa
(626) 965-0668 • (626) 965-2410 • www.cditorque.com
CAT-CDI.C-05/2010
TORQUE TESTERS
AND CALIBRATION
EQUIPMENT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising