MILUX Chrono-thermostat USER GUIDE

MILUX Chrono-thermostat USER GUIDE
USER GUIDE
030930 – GB FR ES ITA
MILUX Chrono-thermostat
GB
OVERVIEW
The MILUX Chrono-thermostat is a programmable digital thermostat able to control and regulate directly
your central heating (Electric, Gas, Oil) or cooling system.
It’s weekly programmable function enables power savings according to your every day life.
FEATURES

7 days program ( except for daily version)

Select HOT or COLD operation


9 Built-in programs
4 User programs

Easy wiring (2 conductor wire)

Keypad lock function (child safety)

Battery powered to prevent loss of program
and time during power cuts


Battery weakness monitoring
Battery replacement without loss of program

Reset function


Program graphic display
Room temperature and Time display


Comfort / Reduced / Anti-freeze temperatures
Temporary temperature override


Automatic or Manual operation
Holiday function
-1-
GB
TECHNICAL CHARACTERISTICS
Measured temperature precision
Set temperature precision
Set temperature range
Regulation characteristics
Driving element
Connection
Batteries
0.1°C (or 0.2°F)
0.5°C (or 0.5°F)
in comfort & reduced : 5°C – 35°C
(or 41°F – 95°F)
in anti-freeze :
0,5°C – 10°C (or 33°F – 50°F)
- regulation speed: 7.5 cycle per hour (8 minutes cycle)
- regulation band: 2°K of proportional band (adjusted power)
8A RELAY (with heater and cooling devices contacts)
3 points screw connector on the rear part of the box
3x LR6 AA 1.5V batteries
DIMENSIONS
-2-
GB
INSTALLATION & WIRING
1
Place the MILUX thermostat (A) on a plain wall away from
windows and doors and not to close to the heater.
Put the connection wires (B) thru the back hole of the rear
part. Use the screws (C) to mount the rear part on the wall.
2
Connect the wires to the connector (D).
Follow the connection diagram
3
Remove the plastic isolator on the batteries to power up the
MILUX. Then close the MILUX as explained in step 3 of
the batteries replacement (last page)
(Cooler)
4
Heater
Adjust the time and follow the QUICK START instructions
L
N
-3-
INSTRUCTIONS
Holiday function activated
GB
How to use your MILUX thermostat
use   keys
to change mode
Operating mode MENU
Temperature overridden
Weak Batteries
Central heating working
Week days
Temperature
Time display
use + / - keys to
change temperature
Graphic program
display
Room temperature displayed
QUICK START
Short and intuitive instructions
With   keys Slide the frame
inside the top MENU to change operating mode (see Modes description)
With + / - keys change set temperature or adjust what is blinking on the screen.
With OK /
key switch between
actual room temperature and set temperature or validate an adjustment.
set clock and adjust time (use +/ - to adjust minutes, press OK, adjust hours, OK, adjust days, OK )
First go to
Go to
program menu and select built-in week program
Go to
comfort mode and adjust comfort temperature required with +/ - keys (Default comfort temp. is 21°C)
Go to
reduced mode and adjust reduced temperature required with +/ - keys (Default reduced temp. is 17°C)
Finally go to
to
(or edit user program
to
, see below)
automatic mode. Your MILUX Chrono-thermostat is now working and follows the program.
-4-
MODES DESCRIPTION
Instruction details for each mode
GB
Manual COMFORT operating mode :
Force comfort temperature operation indefinitely or for a few hours or days (see Holiday function).
By pressing + or - key the comfort temperature start to blink and can be adjusted. If you wait a few
seconds the actual room temperature reappears. MILUX regulation will now follow comfort temp.
AUTOMATIC operating mode :
MILUX Chrono-thermostat will follow automatically the program according to the actual time.
By pressing + or - key you can override the current set temperature until the next change in the program.
The
segment will lit up. Use + / - keys to adjust the temporary required temperature.
At the next program change the
will disappear and the program continues without any alteration.
Manual REDUCED operating mode :
Force reduced temperature operation indefinitely or for a few hours or days (see Holiday function).
By pressing + or - key the reduced temperature start to blink and can be adjusted. If you wait a few
seconds the actual room temperature reappears. MILUX regulation will now follow reduced temp.
Manual ANTI-FREEZE operating mode : (only for Heating systems, HOT operation selected)
Force anti-freeze operation indefinitely or for a few hours or days (see Holiday function).
By pressing + or - key the anti-freeze temperature starts to blink and can be adjusted. If you wait a few
seconds the actual room temperature reappears. MILUX will keep temperature above freezing.
OFF mode: Use this mode if your Heating or cooling installation needs to be turned OFF.
MILUX Chrono-thermostat will switch off the installation and then switch itself OFF (blank screen).
User programs are saved, time is kept running and battery consumption becomes very low.
Any key will wake up the MILUX. The OK / key displays the actual room temperature.
DANGER : IN THIS MODE YOUR INSTALLATION CAN FREEZE because the MILUX is stopped.
-5-
Set CLOCK menu :
Use this menu to adjust the MILUX clock to the actual time.
use +/ - to
Press
use +/ - to
adjust minutes
OK
adjust hours
Press
OK
use +/ - to
adjust days
Press
OK
PROGRAM menu : By pressing + or - key the Program number start to blink,
and use   to see the
other days in the program
then use +/ - to
select program
Shows the daily program
If you select a built-in program
If you select an user program
USER PROGRAM EDITION :
and press OK this program will be followed in
to
to
and press OK you will enter the USER PROGRAM EDITION.
Current blinking cursor position hour
The + key sets
temperature at the current blinking program hour
The - key sets
temperature at the current blinking program hour
Use   keys to slide the blinking cursor position in the day and modify or correct easily the program
When the displayed day is correct press OK to jump to the following day. When you press OK on the last
day you will exit the User program edition and return to the top menu.
Now your user program will be followed if you put the MILUX in automatic operating mode
-6-
.
SPECIAL FUNCTIONS
HOLIDAY Function :
With   keys go to
days
Holiday / Key Lock / Hot-Cold / Reset
only for
comfort mode,
reduced mode or
anti-freeze mode.
function. Then you can select with + or - keys the number of hours
before the MILUX automatically returns to
GB
or the number of
mode and continues to follow the program.
KEYPAD LOCK Function : function to prevent children from playing and changing the MILUX parameters
In
,
,
,
and
operating modes you can maintain the OK key pressed and press simultaneously
on the + or - key to lock (
) or un-lock (
) the keypad.
HOT/COLD operation selection : Go to
, maintain the OK key pressed and press simultaneously on  key
Then press + to choose Hot operation (
) or press - to choose Cold operation (
RESET Function :
).
Erases all user programs and sets the MILUX factory parameters by default
Go to
OFF mode, maintain + and – keys pressed and press simultaneously on the OK key. All the segments will lit up
during a few seconds showing that the MILUX has been erased and restarted with factory defaults parameters.
Factory parameters are :
21°C
17°C
6°C
Then re-adjust the time and follow the QUICK START instructions.
-7-
all comfort
HOT operation
BATTERIES REPLACEMENT
1
How to change the batteries
2
GB
3
3
To close the MILUX,
Press on then left side button and
pull the front panel to remove it.
Replace the three LR6 AA 1.5V
batteries with new ones
You now have access to the
batteries.
IMPORTANT: You have 1 minute to
change the batteries
Place the front panel in front of
the rear part. Insert the three
contacts in the connector holes.
Then push the front panel while
keeping it parallel to the rear part.
You can help the button to click
by pressing slightly on it.
-8-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising