Ubiquiti TS-8-PRO Datasheet

Ubiquiti TS-8-PRO Datasheet
Datasheet
Advanced Power over Ethernet Controllers
Models: TS-5-POE, TS-8-PRO, TS-16-CARRIER
Gigabit PoE Ports
Intuitive Configuration Interface
Advanced Switch Management Features
Datasheet
Advanced Gigabit PoE
Managed Switch
Introducing the Advanced
Power over Ethernet Controllers,
TOUGHSwitch™ PoE from Ubiquiti
Networks. TOUGHSwitch PoE
delivers reliable passive PoE and fast
10/100/1000 Mbps connectivity to
attached Ubiquiti devices and other
devices that support passive PoE.
To connect your PoE devices, simply
enable PoE in the easy-to-use
TOUGHSwitch Configuration Interface.
Each port can be individually
configured to provide PoE, so both
PoE and non‑PoE devices can be
connected.
TOUGHSwitch is available in multiple
versions to meet your deployment
needs.
• TOUGHSwitch PoE is a cost‑effective,
5-port Gigabit switch with 24V PoE
support.
• TOUGHSwitch PoE PRO is an
industrial-strength, 8-port Gigabit
switch with 150 watts of power
capable of powering 24V or
48V devices. Output voltage is
controlled by the software.
• TOUGHSwitch PoE CARRIER features
dual TOUGHSwitch PoE PRO
systems in a rack-mountable, 1U
form factor with 300 watts of power
supporting up to 16 devices.
Simplify Your Deployment
TOUGHSwitch PoE allows network
architects to design cleaner, less
cluttered deployments. For example,
integrating one TOUGHSwitch PoE
PRO can eliminate the need for the
following:
Deployment without TOUGHSwitch
• 8 PoE adapters
• 8 power cords
• 8 power outlets
• 8 Ethernet patch cables
TOUGHSwitch PoE deployments
increase efficiency and greatly reduce
potential failure points – resulting
in faster installations and less
maintenance and troubleshooting.
TOUGHSwitch 8-Port PoE PRO Deployment
www.ubnt.com/toughswitch
2
Datasheet
Intuitive Configuration
Interface
TOUGHSwitch PoE provides a
user‑friendly configuration interface
designed for efficient setup and
control. Accessed via a secured
management port and web browser,
the TOUGHSwitch Configuration
Interface provides intuitive
management with a virtual view of the
ports, showing physical connectivity,
speed, and PoE status.
Advanced Features
TOUGHSwitch PoE is loaded with
a variety of advanced features,
including:
• Port monitoring
• System connection and
management services
• Virtual Local Area Network (VLAN)
configuration
• Spanning Tree Protocol (STP)/
Rapid Spanning Tree Protocol (RSTP)
• Jumbo Frame Support
• Ping Watchdog
• Configurable alerts
www.ubnt.com/toughswitch
3
Datasheet
Models
Features:
• 5 Gigabit PoE Ports
• 24V Configurable Passive PoE
• TOUGHSwitch PoE Configuration Interface
TOUGHSwitch
PRO
• Wall-Mountable
Features:
• 8 Gigabit PoE Ports
• 24V/48V Configurable Passive PoE
• 150 W Power
• TOUGHSwitch PoE Configuration Interface
• Tough Full Metal and Rubber Casing
Features:
• 16 Gigabit PoE Ports
• 24V/48V Configurable Passive PoE
• 300 W Power
• TOUGHSwitch PoE Configuration Interface
• 1U Rack-Mount Form Factor
www.ubnt.com/toughswitch
4
5-Port TOUGHSwitch PoE
Dimensions
197 x 87.5 x 27.3 mm
Weight
250 g
Power Input
24VDC, 2.5A Power Adapter (Included)
Max. Power Consumption
Datasheet
Specifications
60 W
PoE Out Voltage Range
22-24VDC
Max. PoE Wattage Per Data Port
18 W
ESD Rating
24 kV Air / 24 kV Contact
PoE Method
Passive
Button
Reset
USB Port
2.0 Type A (Reserved for Future Use)
Processor
MIPS24K 400 MHz
System Memory
64 MB
Code Storage
8 MB
Certifications
CE, FCC, IC
Wall-Mount
Yes
Operating Temperature
-25 to 55°C (-13 to 131° F)
Operating Humidity
90% Non-Condensing
PoE Configurable Per Port
Management Port
N/A
Data Ports
Off/24V
LEDs Per Port
Management Port
Power /Link/Activity
Data Ports
PoE, Speed/Link/Activity
Networking Interfaces
Management Port
(1) 10/100 Ethernet Port
Data Ports
(5) 10/100/1000 Ethernet Ports
Front Panel
Top View
Back Panel
www.ubnt.com/toughswitch
5
Datasheet
Specifications
8-Port TOUGHSwitch PoE PRO
Dimensions
210 x 185 x 41 mm
Weight
1.24 kg
Power Input
110-120VAC / 210-230VAC
Max. Power Consumption
150 W
PoE Out Voltage Range
45-48VDC / 22-24VDC
Max. PoE Wattage Per Data Port
18W
ESD Rating
24 kV Air / 24 kV Contact
PoE Method
Passive
Button
Reset
USB Port
2.0 Type A (Reserved for Future Use)
Processor
MIPS24K 400 MHz
System Memory
64 MB
Code Storage
8 MB
Certifications
CE, FCC, IC
Operating Temperature
-25 to 55°C (-13 to 131° F)
Operating Humidity
90% Non-Condensing
PoE Configurable Per Port
Management Port
N/A
Data Ports
Off/24V/48V
LEDs Per Port
Management Port
Power/Link/Activity
Data Ports
PoE, Speed/Link/Activity
Networking Interfaces
Management Port
(1) 10/100 Ethernet Port
Data Ports
(8) 10/100/1000 Ethernet Ports
Front Panel
Back Panel
Top View
www.ubnt.com/toughswitch
6
16-Port TOUGHSwitch PoE CARRIER
Dimensions
481 x 44 x 188 mm
Weight
3.64 kg
Hardware Configuration
(2) 8-Port TOUGHSwitch PoE PROs
Mounting
Datasheet
Specifications
Integrated 1U Rack-Mount
Front Panel
Back Panel
Top View
www.ubnt.com/toughswitch
7
Datasheet
Protect your networks from the most
brutal environments with Ubiquiti
Networks’ industrial-grade, shielded
Ethernet cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof
Designed for outdoor use,
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
TOUGHCable Connectors
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
lengths.
Specifically designed for use with Ubiquiti TOUGHCables and available in
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
hardware damage, while allowing rapid field deployment without soldering.
Bulletproof your networks
ESD attacks are the leading
cause for device failures. The
diagram below illustrates the
areas vulnerable to ESD attacks
in a network.
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
By using a grounded Ubiquiti TOUGHSwitch
PoE with Ubiquiti TOUGHCable and
TOUGHCable Connectors, you can effectively
protect against ESD attacks.
TOUGHCable PRO is a Category 5e,
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
TOUGHCable CARRIER is a
Category 5e, outdoor, carrier-class
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
networks.
Ubiquiti
TOUGHCable
Unshielded
cable with
no ESD drain
Additional Information:
• 24 AWG copper conductor pairs
• 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
• PE outdoor-rated, weatherproof
jacket
• Multi-layered shielding
• Available in lengths of 1000 ft
(304.8 m)
PoE adapter with
no earth ground
Ubiquiti
TOUGHSwitch
PoE
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the installer’s responsibility to follow local country regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
For further information, please visit www.ubnt.com.
All specifications in this document are subject to change without notice.
© 2012 Ubiquiti Networks, Inc. All rights reserved.
8
www.ubnt.com
PH091712
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising