9130 - Triple Output Programmable DC Power Supply

9130 - Triple Output Programmable DC Power Supply
Data sheet
Triple Output Programmable DC Power Supply
Model 9130
Specifications
model
9130
The 9130 is a fully programmable triple Output DC Power Supply
delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output.
Each output is fully floating and outputs can be adjusted independently
or connected in series or parallel to produce higher voltages or
currents. The 9130 is ideally suited for applications in Electronic Test,
Production and Service where multiple independent DC supplies are
required and bench space is at a premium.
■
3 independent, fully programmable and electrically
isolated outputs
■
Display & adjust Voltage and Current settings for all
3 channels simultaneously
■
Flexible output configuration: Connect any 2 or all 3
channels in parallel
■
Excellent stability and regulation
■
Very compact foot print (rack mountable 2U x 1/2U)
■
SCPI compatible command set. Communicate via
USB interface, using the included USB to TTL Serial
Converter cable. A RS232 interface cable, converting
from RS232 to TTL, is optional (order IT-E131)
■
OVP (Over Voltage) and OTP (Over Temperature)
protection
■
Output on/off control
■
Application Software for front panel emulation and
simple test sequence generation included
■
50 memory locations for instrument state storage
& recall
■
Closed case calibration
Output Ratings
Load Regulation
±(% of output+offset)
Line Regulation
±(% of output+offset)
Programming Resolution
Readback Resolution
Programming accuracy
12 month, (at 25°C ± 5°C)
±(% of output+offset)
Readback accuracy
12 month, (at 25°C ± 5°C)
±(% of output+offset)
Temperature Coefficient
(0°C ~ 40°C)
±(% of output+offset)
Readback Temperature
Coefficient
±(% of output+offset)
Tracking Accuracy
Series Operation
Tracking Accuracy
Parallel Operation
Ripple
Noise
Transient Response
Gen eral
State Storage Memory
Timer
Weight
Dimensions (W x H x D)
Vol tage
0 ~ 30V (Ch1 & Ch2)
0 ~ 5V (CH3)
Curren t
0 ~ 3A (Ch1 & Ch2)
0 ~ 3A (CH3)
≤ 0.01% + 3mV
≤ 0.1% + 3mA
≤ 0.01% + 3mV
1mV
1mV
≤ 0.1% + 3mA
1mA
1mA
≤ 0.03% + 10mV
≤ 0.1% +5mA
≤ 0.03% + 10mV
≤ 0.1% +5mA
≤ 0.03%+10mV
≤ 0.1%+5mA
≤ 0.03%+10mV
≤ 0.1%+5mA
≤ 0.05%+10mA
≤ 0.02%+5mV
≤ 0.1%+20mA
≤ 1mVrms/3mVp-p
≤ 3mVrms
< 500 μs for CH1&2, <200 μs for CH3
for output to recover to within 75 mV following a
change from 100 mA to 1 A
50 memory locations
Resolution:1s, Range: 1s~999999s
19.8 lbs. (9kg)
8.45" x 3.47" x 13.9"
214.5mm x 88.2mm x 354.6mm
One Year Warranty
Accessories
Supplied: Line Cord, Manual, USB communication cable, software installation disk
Optional: RS232 to TTL Serial Converter cable IT-E131.
Technical data subject to change
© B&K Precision Corp. 2011
v071411
w w w.bk prec ision.c om
Tel.: 714.921.9095
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising