Automatic Switch Mode Battery Charger
15A
Automatic
Switch Mode
Battery Charger
Model
SEC-1215UL
15 Amps
12 VDC
Design Features
- Switch mode technology for high efficiency,
lightweight and quiet operation
- User configurable AC input voltage – 120 or 230 VAC,
50 / 60 Hz
- User selectable (by DIP switch) 2 or 3 stage charging
- Fully automatic operation
- Can charge 3 banks of batteries simultaneously, no
isolator necessary
- Ammeter and LED power status indicator
- For Lead Acid Batteries - Flooded & Sealed AGM /
Gel Cell
- Protections: Short circuit, overload, reverse battery
polarity
4004711
2 YEAR WARRANTY
Model No.
Nominal Input Voltage (pre-set)
Internal Jumper Change
Input Frequency
Output Voltage, Boost 1,2
Output Voltage, Float1
Output Amps
Operating Temperature Range
SEC-1215UL
120 VAC, 60 Hz, 3.3A
230 VAC, 50 Hz
50 / 60 Hz
14 VDC, or 14.4 VDC or disabled
13.5 VDC
15A
0 - 40°C
weight, lb
4.8
Weight, kg
2.2
Dimensions (L x W x H), INCHES
8.5 x 8.4 x 3.3
Dimensions (L x W x H), MM
218 x 214 x 83
Protections
Output Banks
Safety Compliance
EMI Compliance
Short Circuit, Overload, Reverse Battery Polarity
3
i) Conforms to ANSI/UL STD 1564
ii) Certified to CAN/CSA STD C22.2 No. 107.2
FCC Part 15(B), Class B
1. Voltages based on battery temperature of 80°F / 26.6°C
2. Based on selection by DIP SWITCH
NOTE: Specifications are subject to change without notice
12001-SEC-1215UL-0512
To view a full selection of Samlex products visit our website at www.samlexamerica.com or contact us: 1(800) 561-5885 or sales@samlexamerica.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising