Asterisk Documentation - Asterisk Wiki

Asterisk Documentation - Asterisk Wiki
Asterisk Documentation
Asterisk Development Team <asteriskteam@digium.com>
1. Asterisk 1.8 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 New in 1.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Asterisk Command Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1 AGI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.1 AGICommand_ANSWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.2 AGICommand_ASYNCAGI BREAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.3 AGICommand_CHANNEL STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.4 AGICommand_CONTROL STREAM FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.5 AGICommand_DATABASE DEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.6 AGICommand_DATABASE DELTREE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.7 AGICommand_DATABASE GET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.8 AGICommand_DATABASE PUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.9 AGICommand_EXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.10 AGICommand_GET DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.11 AGICommand_GET FULL VARIABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.12 AGICommand_GET OPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.13 AGICommand_GET VARIABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.14 AGICommand_GOSUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.15 AGICommand_HANGUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.16 AGICommand_NOOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.17 AGICommand_RECEIVE CHAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.18 AGICommand_RECEIVE TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.19 AGICommand_RECORD FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.20 AGICommand_SAY ALPHA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.21 AGICommand_SAY DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.22 AGICommand_SAY DATETIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.23 AGICommand_SAY DIGITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.24 AGICommand_SAY NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.25 AGICommand_SAY PHONETIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.26 AGICommand_SAY TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.27 AGICommand_SEND IMAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.28 AGICommand_SEND TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.29 AGICommand_SET AUTOHANGUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.30 AGICommand_SET CALLERID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.31 AGICommand_SET CONTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.32 AGICommand_SET EXTENSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.33 AGICommand_SET MUSIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.34 AGICommand_SET PRIORITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.35 AGICommand_SET VARIABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.36 AGICommand_SPEECH ACTIVATE GRAMMAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.37 AGICommand_SPEECH CREATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.38 AGICommand_SPEECH DEACTIVATE GRAMMAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.39 AGICommand_SPEECH DESTROY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.40 AGICommand_SPEECH LOAD GRAMMAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.41 AGICommand_SPEECH RECOGNIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.42 AGICommand_SPEECH SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.43 AGICommand_SPEECH UNLOAD GRAMMAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.44 AGICommand_STREAM FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.45 AGICommand_TDD MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.46 AGICommand_VERBOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.47 AGICommand_WAIT FOR DIGIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1.48 AGI Command Template Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2 AMI Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.1 AMI Action Template Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.2 ManagerAction_AbsoluteTimeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.3 ManagerAction_AgentLogoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.4 ManagerAction_Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.5 ManagerAction_AGI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.6 ManagerAction_AOCMessage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.7 ManagerAction_Atxfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.8 ManagerAction_Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.9 ManagerAction_Challenge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.10 ManagerAction_ChangeMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.11 ManagerAction_Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.12 ManagerAction_CoreSettings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.13 ManagerAction_CoreShowChannels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.14 ManagerAction_CoreStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.15 ManagerAction_CreateConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
17
17
17
17
18
19
19
20
20
21
22
22
23
23
24
25
25
26
26
27
27
28
28
29
30
30
31
31
32
32
33
34
34
35
35
36
36
37
37
38
38
39
39
40
40
41
41
42
43
43
44
44
45
45
46
46
47
49
49
50
51
51
52
52
53
53
1.2.2.16 ManagerAction_DAHDIDialOffhook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.17 ManagerAction_DAHDIDNDoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.18 ManagerAction_DAHDIDNDon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.19 ManagerAction_DAHDIHangup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.20 ManagerAction_DAHDIRestart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.21 ManagerAction_DAHDIShowChannels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.22 ManagerAction_DAHDITransfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.23 ManagerAction_DataGet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.24 ManagerAction_DBDel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.25 ManagerAction_DBDelTree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.26 ManagerAction_DBGet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.27 ManagerAction_DBPut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.28 ManagerAction_Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.29 ManagerAction_ExtensionState . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.30 ManagerAction_GetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.31 ManagerAction_GetConfigJSON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.32 ManagerAction_Getvar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.33 ManagerAction_Hangup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.34 ManagerAction_IAXnetstats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.35 ManagerAction_IAXpeerlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.36 ManagerAction_IAXpeers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.37 ManagerAction_IAXregistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.38 ManagerAction_JabberSend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.39 ManagerAction_ListCategories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.40 ManagerAction_ListCommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.41 ManagerAction_LocalOptimizeAway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.42 ManagerAction_Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.43 ManagerAction_Logoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.44 ManagerAction_MailboxCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.45 ManagerAction_MailboxStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.46 ManagerAction_MeetmeList . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.47 ManagerAction_MeetmeMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.48 ManagerAction_MeetmeUnmute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.49 ManagerAction_MixMonitorMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.50 ManagerAction_ModuleCheck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.51 ManagerAction_ModuleLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.52 ManagerAction_Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.53 ManagerAction_Originate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.54 ManagerAction_Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.55 ManagerAction_ParkedCalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.56 ManagerAction_PauseMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.57 ManagerAction_Ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.58 ManagerAction_PlayDTMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.59 ManagerAction_QueueAdd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.60 ManagerAction_QueueLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.61 ManagerAction_QueuePause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.62 ManagerAction_QueuePenalty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.63 ManagerAction_QueueReload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.64 ManagerAction_QueueRemove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.65 ManagerAction_QueueReset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.66 ManagerAction_QueueRule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.67 ManagerAction_Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.68 ManagerAction_QueueStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.69 ManagerAction_QueueSummary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.70 ManagerAction_Redirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.71 ManagerAction_Reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.72 ManagerAction_SendText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.73 ManagerAction_Setvar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.74 ManagerAction_ShowDialPlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.75 ManagerAction_SIPnotify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.76 ManagerAction_SIPpeers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.77 ManagerAction_SIPqualifypeer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.78 ManagerAction_SIPshowpeer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.79 ManagerAction_SIPshowregistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.80 ManagerAction_SKINNYdevices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.81 ManagerAction_SKINNYlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.82 ManagerAction_SKINNYshowdevice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.83 ManagerAction_SKINNYshowline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.84 ManagerAction_Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.85 ManagerAction_StopMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.86 ManagerAction_UnpauseMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.87 ManagerAction_UpdateConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.88 ManagerAction_UserEvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.89 ManagerAction_VoicemailUsersList . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2.90 ManagerAction_WaitEvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
55
55
56
56
57
58
58
59
59
60
61
61
62
62
63
64
64
65
65
66
66
67
68
68
69
69
70
70
71
72
72
73
74
74
75
76
76
77
78
78
79
80
80
81
82
82
83
84
84
85
85
86
86
87
88
88
89
89
90
91
91
92
92
93
93
94
94
95
96
96
97
98
98
99
1.2.3 Dialplan Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.1 Application_AddQueueMember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.2 Application_ADSIProg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.3 Application_AELSub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.4 Application_AgentLogin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.5 Application_AgentMonitorOutgoing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.6 Application_AGI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.7 Application_AlarmReceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.8 Application_AMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.9 Application_Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.10 Application_Authenticate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.11 Application_BackGround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.12 Application_BackgroundDetect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.13 Application_Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.14 Application_Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.15 Application_CallCompletionCancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.16 Application_CallCompletionRequest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.17 Application_CELGenUserEvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.18 Application_ChangeMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.19 Application_ChanIsAvail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.20 Application_ChannelRedirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.21 Application_ChanSpy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.22 Application_ClearHash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.23 Application_ConfBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.24 Application_Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.25 Application_ContinueWhile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.26 Application_ControlPlayback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.27 Application_DAHDIAcceptR2Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.28 Application_DAHDIBarge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.29 Application_DAHDIRAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.30 Application_DAHDIScan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.31 Application_DAHDISendCallreroutingFacility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.32 Application_DAHDISendKeypadFacility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.33 Application_DateTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.34 Application_DBdel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.35 Application_DBdeltree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.36 Application_DeadAGI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.37 Application_Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.38 Application_Dictate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.39 Application_Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.40 Application_DISA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.41 Application_DumpChan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.42 Application_EAGI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.43 Application_Echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.44 Application_EndWhile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.45 Application_Exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.46 Application_ExecIf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.47 Application_ExecIfTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.48 Application_ExitWhile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.49 Application_ExtenSpy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.50 Application_ExternalIVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.51 Application_Festival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.52 Application_Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.53 Application_FollowMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.54 Application_ForkCDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.55 Application_GetCPEID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.56 Application_Gosub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.57 Application_GosubIf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.58 Application_Goto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.59 Application_GotoIf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.60 Application_GotoIfTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.61 Application_Hangup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.62 Application_IAX2Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.63 Application_ICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.64 Application_ImportVar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.65 Application_Incomplete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.66 Application_IVRDemo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.67 Application_JabberJoin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.68 Application_JabberLeave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.69 Application_JabberSend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.70 Application_JabberSendGroup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.71 Application_JabberStatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.72 Application_JACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.73 Application_Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.74 Application_Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
100
101
101
102
102
103
104
105
106
107
107
108
109
110
110
111
112
112
113
114
114
116
116
117
118
118
119
119
120
120
121
122
122
123
123
124
125
128
129
129
130
131
132
133
133
134
134
135
136
137
138
138
139
140
141
142
143
143
144
145
146
147
147
148
148
149
149
150
150
151
152
153
153
154
1.2.3.75 Application_MacroExclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.76 Application_MacroExit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.77 Application_MacroIf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.78 Application_MailboxExists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.79 Application_MeetMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.80 Application_MeetMeAdmin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.81 Application_MeetMeChannelAdmin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.82 Application_MeetMeCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.83 Application_Milliwatt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.84 Application_MinivmAccMess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.85 Application_MinivmDelete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.86 Application_MinivmGreet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.87 Application_MinivmMWI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.88 Application_MinivmNotify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.89 Application_MinivmRecord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.90 Application_MixMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.91 Application_Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.92 Application_Morsecode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.93 Application_MP3Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.94 Application_MSet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.95 Application_MusicOnHold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.96 Application_NBScat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.97 Application_NoCDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.98 Application_NoOp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.99 Application_ODBC_Commit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.100 Application_ODBC_Rollback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.101 Application_ODBCFinish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.102 Application_Originate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.103 Application_OSPAuth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.104 Application_OSPFinish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.105 Application_OSPLookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.106 Application_OSPNext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.107 Application_Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.108 Application_Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.109 Application_ParkAndAnnounce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.110 Application_ParkedCall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.111 Application_PauseMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.112 Application_PauseQueueMember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.113 Application_Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.114 Application_PickupChan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.115 Application_Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.116 Application_PlayTones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.117 Application_PrivacyManager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.118 Application_Proceeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.119 Application_Progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.120 Application_Queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.121 Application_QueueLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.122 Application_RaiseException . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.123 Application_Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.124 Application_ReadExten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.125 Application_ReadFile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.126 Application_ReceiveFax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.127 Application_ReceiveFAX (app_fax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.128 Application_ReceiveFax (res_fax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.129 Application_Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.130 Application_RemoveQueueMember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.131 Application_ResetCDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.132 Application_RetryDial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.133 Application_Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.134 Application_Ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.135 Application_SayAlpha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.136 Application_SayCountedAdj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.137 Application_SayCountedNoun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.138 Application_SayCountPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.139 Application_SayDigits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.140 Application_SayNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.141 Application_SayPhonetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.142 Application_SayUnixTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.143 Application_SendDTMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.144 Application_SendFax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.145 Application_SendFAX (app_fax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.146 Application_SendFax (res_fax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.147 Application_SendImage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.148 Application_SendText . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.149 Application_SendURL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
155
156
156
157
158
159
160
161
161
162
163
163
164
165
165
166
167
168
169
170
170
171
171
172
173
173
174
174
175
176
177
178
179
180
181
182
183
183
184
185
186
186
187
188
188
189
190
191
192
193
194
194
195
196
196
197
198
199
200
200
201
201
202
203
204
204
205
206
206
207
208
208
209
210
211
1.2.3.150 Application_Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.151 Application_SetAMAFlags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.152 Application_SetCallerPres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.153 Application_SetMusicOnHold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.154 Application_SIPAddHeader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.155 Application_SIPDtmfMode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.156 Application_SIPRemoveHeader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.157 Application_Skel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.158 Application_SLAStation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.159 Application_SLATrunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.160 Application_SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.161 Application_SoftHangup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.162 Application_SpeechActivateGrammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.163 Application_SpeechBackground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.164 Application_SpeechCreate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.165 Application_SpeechDeactivateGrammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.166 Application_SpeechDestroy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.167 Application_SpeechLoadGrammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.168 Application_SpeechProcessingSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.169 Application_SpeechStart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.170 Application_SpeechUnloadGrammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.171 Application_StackPop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.172 Application_StartMusicOnHold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.173 Application_StopMixMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.174 Application_StopMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.175 Application_StopMusicOnHold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.176 Application_StopPlayTones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.177 Application_System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.178 Application_TestClient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.179 Application_TestServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.180 Application_Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.181 Application_TryExec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.182 Application_TrySystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.183 Application_UnpauseMonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.184 Application_UnpauseQueueMember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.185 Application_UserEvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.186 Application_Verbose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.187 Application_VMAuthenticate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.188 Application_VMSayName . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.189 Application_VoiceMail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.190 Application_VoiceMailMain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.191 Application_Wait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.192 Application_WaitExten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.193 Application_WaitForNoise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.194 Application_WaitForRing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.195 Application_WaitForSilence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.196 Application_WaitMusicOnHold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.197 Application_WaitUntil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.198 Application_While . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.199 Application_Zapateller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3.200 Dialplan Application Template Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4 Dialplan Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.1 Dialplan Function Template Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.2 Function_AES_DECRYPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.3 Function_AES_ENCRYPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.4 Function_AGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.5 Function_AGENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.6 Function_ARRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.7 Function_AST_CONFIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.8 Function_AUDIOHOOK_INHERIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.9 Function_BASE64_DECODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.10 Function_BASE64_ENCODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.11 Function_BLACKLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.12 Function_CALENDAR_BUSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.13 Function_CALENDAR_EVENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.14 Function_CALENDAR_QUERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.15 Function_CALENDAR_QUERY_RESULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.16 Function_CALENDAR_WRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.17 Function_CALLCOMPLETION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.18 Function_CALLERID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.19 Function_CALLERPRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.20 Function_CDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.21 Function_CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.22 Function_CHANNELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.23 Function_CHECKSIPDOMAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
211
212
213
213
214
215
215
216
217
217
218
219
220
220
221
221
222
222
223
224
224
224
225
226
226
227
227
228
228
229
229
230
231
231
232
233
234
234
235
235
236
238
238
239
239
240
241
241
242
243
243
244
244
245
245
246
247
247
248
248
250
250
251
251
252
253
253
254
255
256
257
258
259
261
261
1.2.4.24 Function_CONNECTEDLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.25 Function_CSV_QUOTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.26 Function_CUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.27 Function_DB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.28 Function_DB_DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.29 Function_DB_EXISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.30 Function_DEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.31 Function_DENOISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.32 Function_DEVICE_STATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.33 Function_DIALGROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.34 Function_DIALPLAN_EXISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.35 Function_DUNDILOOKUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.36 Function_DUNDIQUERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.37 Function_DUNDIRESULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.38 Function_ENUMLOOKUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.39 Function_ENUMQUERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.40 Function_ENUMRESULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.41 Function_ENV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.42 Function_EVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.43 Function_EXCEPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.44 Function_EXISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.45 Function_EXTENSION_STATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.46 Function_FAXOPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.47 Function_FIELDNUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.48 Function_FIELDQTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.49 Function_FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.50 Function_FILE_COUNT_LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.51 Function_FILE_FORMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.52 Function_FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.53 Function_FRAME_TRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.54 Function_GLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.55 Function_GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.56 Function_GROUP_COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.57 Function_GROUP_LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.58 Function_GROUP_MATCH_COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.59 Function_HASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.60 Function_HASHKEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.61 Function_HINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.62 Function_IAXPEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.63 Function_IAXVAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.64 Function_ICONV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.65 Function_IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.66 Function_IFMODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.67 Function_IFTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.68 Function_IMPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.69 Function_INC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.70 Function_ISNULL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.71 Function_JABBER_RECEIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.72 Function_JABBER_STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.73 Function_KEYPADHASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.74 Function_LEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.75 Function_LISTFILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.76 Function_LOCAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.77 Function_LOCAL_PEEK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.78 Function_LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.79 Function_MAILBOX_EXISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.80 Function_MASTER_CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.81 Function_MATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.82 Function_MD5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.83 Function_MEETME_INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.84 Function_MINIVMACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.85 Function_MINIVMCOUNTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.86 Function_MUTEAUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.87 Function_ODBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.88 Function_ODBC_FETCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.89 Function_PASSTHRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.90 Function_PITCH_SHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.91 Function_POP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.92 Function_PP_EACH_EXTENSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.93 Function_PP_EACH_USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.94 Function_PUSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.95 Function_QUEUE_EXISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.96 Function_QUEUE_MEMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.97 Function_QUEUE_MEMBER_COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.98 Function_QUEUE_MEMBER_LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
262
263
264
264
265
265
266
267
267
268
269
270
270
271
271
272
273
273
274
274
275
275
276
277
278
278
281
281
282
283
283
284
285
285
286
286
287
287
288
289
289
290
290
291
291
292
292
293
294
294
295
295
296
297
297
298
298
299
300
300
301
301
302
303
304
304
305
306
306
307
307
308
309
310
311
1.2.4.99 Function_QUEUE_MEMBER_PENALTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.100 Function_QUEUE_VARIABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.101 Function_QUEUE_WAITING_COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.102 Function_QUOTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.103 Function_RAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.104 Function_REALTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.105 Function_REALTIME_DESTROY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.106 Function_REALTIME_FIELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.107 Function_REALTIME_HASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.108 Function_REALTIME_STORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.109 Function_REDIRECTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.110 Function_REGEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.111 Function_REPLACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.112 Function_SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.113 Function_SHA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.114 Function_SHARED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.115 Function_SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.116 Function_SHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.117 Function_SIP_HEADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.118 Function_SIPCHANINFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.119 Function_SIPPEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.120 Function_SMDI_MSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.121 Function_SMDI_MSG_RETRIEVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.122 Function_SORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.123 Function_SPEECH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.124 Function_SPEECH_ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.125 Function_SPEECH_GRAMMAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.126 Function_SPEECH_RESULTS_TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.127 Function_SPEECH_SCORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.128 Function_SPEECH_TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.129 Function_SPRINTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.130 Function_SQL_ESC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.131 Function_SRVQUERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.132 Function_SRVRESULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.133 Function_STAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.134 Function_STRFTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.135 Function_STRPTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.136 Function_SYSINFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.137 Function_TESTTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.138 Function_TIMEOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.139 Function_TOLOWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.140 Function_TOUPPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.141 Function_TRYLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.142 Function_TXTCIDNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.143 Function_UNLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.144 Function_UNSHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.145 Function_URIDECODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.146 Function_URIENCODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.147 Function_VALID_EXTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.148 Function_VERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.149 Function_VMCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.4.150 Function_VOLUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
311
312
313
314
314
315
316
316
317
318
318
320
321
322
322
323
323
324
325
325
326
327
328
328
329
330
330
331
331
332
332
333
333
334
334
335
335
336
337
337
338
339
339
340
340
341
341
342
342
343
344
344
Asterisk 1.8 Documentation
New in 1.8
Overview
In Brief
Detailed Listing
SIP Changes
IAX2 Changes
MGCP Changes
XMPP Google Talk/Jingle changes
Applications
Dialplan Functions
Dialplan Variables
Queue changes
mISDN channel driver (chan_misdn) changes
thirdparty mISDN enhancements
libpri channel driver (chan_dahdi) DAHDI changes
Asterisk Manager Interface
Channel Event Logging
CDR
Calendaring for Asterisk
Call Completion Supplementary Services for Asterisk
Multicast RTP Support
Security Events Framework
Fax
Miscellaneous
CLI Changes
Overview
A listing of new capabilities in Asterisk 1.8
In Brief
Asterisk 1.8 introduces a number of new features since the previous 1.6.2 release. Highlights
include:
Secure RTP (SRTP)
IPv6 Support for SIP
Connected Party Identification Support - COLP and CONP.
Calendaring Integration for CalDAV, iCal, Exchange or EWS calendars
A new call logging system, Channel Event Logging (CEL)
Distributed Device State, including Message Waiting Indicator using Jabber/XMPP PubSub
Call Completion Supplementary Services (CCSS) Support, including Call Completion on Busy Subscriber (CCBS) and Call Completion
on No Response (CCNR)
Advice of Charge, including AOC-S, AOC-D, and AOC-E Support
Multicast RTP
ISDN Q.SIG Call Rerouting and Call Deflection
Google Talk and Google Voice integration
Audio Pitch Shifting (for fun and profit)
Detailed Listing
SIP Changes
Added preferred_codec_only option in sip.conf. This feature limits the joint
codecs sent in response to an INVITE to the single most preferred codec.
Added SIP_CODEC_OUTBOUND dialplan variable which can be used to set the codec
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
to be used for the outgoing call. It must be one of the codecs configured
for the device.
Added tlsprivatekey option to sip.conf. This allows a separate .pem file
to be used for holding a private key. If tlsprivatekey is not specified,
tlscertfile is searched for both public and private key.
Added tlsclientmethod option to sip.conf. This allows the protocol for
outbound client connections to be specified.
The sendrpid parameter has been expanded to include the options
'rpid' and 'pai'. Setting sendrpid to 'rpid' will cause Remote-Party-ID
header to be sent (equivalent to setting sendrpid=yes) and setting
sendrpid to 'pai' will cause P-Asserted-Identity header to be sent.
The 'ignoresdpversion' behavior has been made automatic when the SDP received
is in response to a T.38 re-INVITE that Asterisk initiated. In this situation,
since the call will fail if Asterisk does not process the incoming SDP, Asterisk
will accept the SDP even if the SDP version number is not properly incremented,
but will generate a warning in the log indicating that the SIP peer that sent
the SDP should have the 'ignoresdpversion' option set.
The 'nat' option has now been been changed to have yes, no, force_rport, and
comedia as valid values. Setting it to yes forces RFC 3581 behavior and enables
symmetric RTP support. Setting it to no only enables RFC 3581 behavior if the
remote side requests it and disables symmetric RTP support. Setting it to
force_rport forces RFC 3581 behavior and disables symmetric RTP support.
Setting it to comedia enables RFC 3581 behavior if the remote side requests it
and enables symmetric RTP support.
Slave SIP channels now set HASH(SIP_CAUSE,<slave-channel-name>) on each
response. This permits the master channel to know how each channel dialled
in a multi-channel setup resolved in an individual way.
Added 'externtcpport' and 'externtlsport' options to allow custom port
configuration for the externip and externhost options when tcp or tls is used.
Added support for message body (stored in content variable) to SIP NOTIFY message
accessible via AMI and CLI.
Added 'media_address' configuration option which can be used to explicitly specify
the IP address to use in the SDP for media (audio, video, and text) streams.
Added 'unsolicited_mailbox' configuration option which specifies the virtual mailbox
that the new/old count should be stored on if an unsolicited MWI NOTIFY message is
received.
Added 'use_q850_reason' configuration option for generating and parsing
if available Reason: Q.850;cause=<cause code> header. It is implemented
in some gateways for better passing PRI/SS7 cause codes via SIP.
When dialing SIP peers, a new component may be added to the end of the dialstring
to indicate that a specific remote IP address or host should be used when dialing
the particular peer. The dialstring format is SIP/peer/exten/host_or_IP.
SRTP SDES support for encrypting calls to/from Asterisk over SIP. The
ability to selectively force bridged channels to also be encrypted is also
implemented. Branching in the dialplan can be done based on whether or not
a channel has secure media and/or signaling.
Added directmediapermit/directmediadeny to limit which peers can send direct media
to each other
Added the 'snom_aoc_enabled' option to turn on support for sending Advice of
Charge messages to snom phones.
Added support for G.719 media streams.
Added support for 16khz signed linear media streams.
SIP is now able to bind to and communicate with IPv6 addresses. In addition,
RTP has been outfitted with the same abilities.
Added support for setting the Max-Forwards: header in SIP requests. Setting is
available in device configurations as well as in the dial plan.
Addition of the 'subscribe_network_change' option for turning on and off
res_stun_monitor module support in chan_sip.
Addition of the 'auth_options_requests' option for turning on and off
authentication for OPTIONS requests in chan_sip.
IAX2 Changes
Added rtsavesysname option into iax.conf to allow the systname to be saved
on realtime updates.
Added the ability for chan_iax2 to inform the dialplan whether or not
encryption is being used. This interoperates with the SIP SRTP implementation
so that a secure SIP call can be bridged to a secure IAX call when the
dialplan requires bridged channels to be "secure".
Addition of the 'subscribe_network_change' option for turning on and off
res_stun_monitor module support in chan_iax.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MGCP Changes
Added ability to preset channel variables on indicated lines with the setvar
configuration option. Also, clearvars=all resets the list of variables back
to none.
PacketCable NCS 1.0 support has been added for Docsis/Eurodocsis Networks.
See configs/res_pktccops.conf for more information.
XMPP Google Talk/Jingle changes
Added the externip option to gtalk.conf.
Added the stunaddr option to gtalk.conf which allows for the automatic
retrieval of the external ip from a stun server.
Applications
Added 'p' option to PickupChan() to allow for picking up channel by the first
match to a partial channel name.
Added .m3u support for Mp3Player application.
Added progress option to the app_dial D() option. When progress DTMF is
present, those values are sent immediately upon receiving a PROGRESS message
regardless if the call has been answered or not.
Added functionality to the app_dial F() option to continue with execution
at the current location when no parameters are provided.
Added the 'a' option to app_dial to answer the calling channel before any
announcements or macros are executed.
Modified app_dial to set answertime when the called channel answers even if
the called channel hangs up during playback of an announcement.
Modified app_dial 'r' option to support an additional parameter to play an
indication tone from indications.conf
Added c() option to app_chanspy. This option allows custom DTMF to be set
to cycle through the next available channel. By default this is still '*'.
Added x() option to app_chanspy. This option allows DTMF to be set to
exit the application.
The Voicemail application has been improved to automatically ignore messages
that only contain silence.
If you set maxmsg to 0 in voicemail.conf, Voicemail will consider the
associated mailbox(es) to be greetings-only.
The ChanSpy application now has the 'S' option, which makes the application
automatically exit once it hits a point where no more channels are available
to spy on.
The ChanSpy application also now has the 'E' option, which spies on a single
channel and exits when that channel hangs up.
The MeetMe application now turns on the DENOISE() function by default, for
each participant. In our tests, this has significantly decreased background
noise (especially noisy data centers).
Voicemail now permits storage of secrets in a separate file, located in the
spool directory of each individual user. The control for this is located in
the "passwordlocation" option in voicemail.conf. Please see the sample
configuration for more information.
The ChanIsAvail application now exposes the returned cause code using a separate
variable, AVAILCAUSECODE, instead of overwriting the device state in AVAILSTATUS.
Added 'd' option to app_followme. This option disables the "Please hold"
announcement.
Added 'y' option to app_record. This option enables a mode where any DTMF digit
received will terminate recording.
Voicemail now supports per mailbox settings for folders when using IMAP storage.
Previously the folder could only be set per context, but has now been extended
using the imapfolder option.
Voicemail now supports per mailbox settings for nextaftercmd and minsecs.
Voicemail now allows the pager date format to be specified separately from the
email date format.
New applications JabberJoin, JabberLeave, and JabberSendGroup have been added
to allow joining, leaving, and sending text to group chats.
MeetMe has a new option 'G' to play an announcement before joining a conference.
Page has a new option 'A(x)' which will playback an announcement simultaneously
to all paged phones (and optionally excluding the caller's one using the new
option 'n') before the call is bridged.
The 'f' option to Dial has been augmented to take an optional argument. If no
argument is provided, the 'f' option works as it always has. If an argument is
provided, then the connected party information of all outgoing channels created
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
during the Dial will be set to the argument passed to the 'f' option.
Dial now inherits the GOSUB_RETVAL from the peer, when the U() option runs a
Gosub on the peer.
The OSP lookup application adds in/outbound network ID, optional security,
number portability, QoS reporting, destination IP port, custom info and service
type features.
Added new application VMSayName that will play the recorded name of the voicemail
user if it exists, otherwise will play the mailbox number.
Added custom device states to ConfBridge bridges. Use 'confbridge:<name>' to
retrieve state for a particular bridge, where <name> is the conference name
app_directory now allows exiting at any time using the operator or pound key.
Voicemail now supports setting a locale per-mailbox.
Two new applications are provided for declining counting phrases in multiple
languages. See the application notes for SayCountedNoun and SayCountedAdj for
more information.
Voicemail now runs the externnotify script when pollmailboxes is activated and
notices a change.
Voicemail now includes rdnis within msgXXXX.txt file.
Added 'D' command to ExternalIVR full details in http://wiki.asterisk.org
Dialplan Functions
SRVQUERY and SRVRESULT functions added. This can be used to query and iterate
over SRV records associated with a specific service. From the CLI, type
'core show function SRVQUERY' and 'core show function SRVRESULT' for more
details on how these may be used.
PITCH_SHIFT dialplan function added. This function can be used to modify the
pitch of a channel's tx and rx audio streams.
Added new dialplan functions CONNECTEDLINE and REDIRECTING which permits
setting various connected line and redirecting party information.
CALLERID and CONNECTEDLINE dialplan functions have been extended to
support ISDN subaddressing.
The CHANNEL() function now supports the "name" and "checkhangup" options.
For DAHDI channels, the CHANNEL() dialplan function now allows
the dialplan to request changes in the configuration of the active
echo canceller on the channel (if any), for the current call only.
The syntax is:
exten => s,n,Set(CHANNEL(echocan_mode)=off)
The possible values are:
on - normal mode (the echo canceller is actually reinitialized)
off - disabled
fax - FAX/data mode (NLP disabled if possible, otherwise completely
disabled)
voice - voice mode (returns from FAX mode, reverting the changes that
were made when FAX mode was requested)
Added new dialplan function MASTER_CHANNEL(), which permits retrieving
and setting variables on the channel which created the current channel.
Administrators should take care to avoid naming conflicts, when multiple
channels are dialled at once, especially when used with the Local channel
construct (which all could set variables on the master channel). Usage
of the HASH() dialplan function, with the key set to the name of the slave
channel, is one approach that will avoid conflicts.
Added new dialplan function MUTEAUDIO() for muting inbound and/or outbound
audio in a channel.
func_odbc now allows multiple row results to be retrieved without using
mode=multirow. If rowlimit is set, then additional rows may be retrieved
from the same query by using the name of the function which retrieved the
first row as an argument to ODBC_FETCH().
Added JABBER_RECEIVE, which permits receiving XMPP messages from the
dialplan. This function returns the content of the received message.
Added REPLACE, which searches a given variable name for a set of characters,
then either replaces them with a single character or deletes them.
Added PASSTHRU, which literally passes the same argument back as its return
value. The intent is to be able to use a literal string argument to
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
functions that currently require a variable name as an argument.
HASH-associated variables now can be inherited across channel creation, by
prefixing the name of the hash at assignment with the appropriate number of
underscores, just like variables.
GROUP_MATCH_COUNT has been improved to allow regex matching on category
CHANNEL(secure_bridge_signaling) and CHANNEL(secure_bridge_media) to set/get
whether or not channels that are bridged to the current channel will be
required to have secure signaling and/or media.
CHANNEL(secure_signaling) and CHANNEL(secure_media) to get whether or not
the current channel has secure signaling and/or media.
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
Returns "0" if there is a B channel associated with the call.
Returns "1" if no B channel is associated with the call. The call is either
on hold or is a call waiting call.
Added option to dialplan function CDR(), the 'f' option
allows for high resolution times for billsec and duration fields.
FILE() now supports line-mode and writing.
Added FIELDNUM(), which returns the 1-based offset of a field in a list.
FRAME_TRACE(), for tracking internal ast_frames on a channel.
Dialplan Variables
Added DYNAMIC_FEATURENAME which holds the last triggered dynamic feature.
Added DYNAMIC_PEERNAME which holds the unique channel name on the other side
and is set when a dynamic feature is triggered.
Added PARKINGLOT which can be used with parkeddynamic feature.conf option
to dynamically create a new parking lot matching the value this varible is
set to.
Added PARKINGDYNAMIC which represents the template parkinglot defined in
features.conf that should be the base for dynamic parkinglots.
Added PARKINGDYNCONTEXT which tells what context a newly created dynamic
parkinglot should have.
Added PARKINGDYNPOS which holds what parking positions a dynamic parkinglot
should have.
Queue changes
Added "ready" option to QUEUE_MEMBER counting to count free agents whose wrap-up
timeout has expired.
Added 'R' option to app_queue. This option stops moh and indicates ringing
to the caller when an Agent's phone is ringing. This can be used to indicate
to the caller that their call is about to be picked up, which is nice when
one has been on hold for an extened period of time.
A new config option, penaltymemberslimit, has been added to queues.conf.
When set this option will disregard penalty settings when a queue has too
few members.
A new option, 'I' has been added to both app_queue and app_dial.
By setting this option, Asterisk will not update the caller with
connected line changes or redirecting party changes when they occur.
A 'relative-peroidic-announce' option has been added to queues.conf. When
enabled, this option will cause periodic announce times to be calculated
from the end of announcements rather than from the beginning.
The autopause option in queues.conf can be passed a new value, "all." The
result is that if a member becomes auto-paused, he will be paused in all
queues for which he is a member, not just the queue that failed to reach
the member.
Added dialplan function QUEUE_EXISTS to check if a queue exists
The queue logger now allows events to optionally propagate to a file,
even when realtime logging is turned on. Additionally, realtime logging
supports sending the event arguments to 5 individual fields, although it
will fallback to the previous data definition, if the new table layout is
not found.
mISDN channel driver (chan_misdn) changes
Added display_connected parameter to misdn.conf to put a display string
in the CONNECT message containing the connected name and/or number if
the presentation setting permits it.
Added display_setup parameter to misdn.conf to put a display string
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
in the SETUP message containing the caller name and/or number if the
presentation setting permits it.
Made misdn.conf parameters localdialplan and cpndialplan take a -1 to
indicate the dialplan settings are to be obtained from the asterisk
channel.
Made misdn.conf parameter callerid accept the "name" <number> format
used by the rest of the system.
Made use the nationalprefix and internationalprefix misdn.conf
parameters to prefix any received number from the ISDN link if that
number has the corresponding Type-Of-Number. NOTE: This includes
comparing the incoming call's dialed number against the MSN list.
Added the following new parameters: unknownprefix, netspecificprefix,
subscriberprefix, and abbreviatedprefix in misdn.conf to prefix any
received number from the ISDN link if that number has the corresponding
Type-Of-Number.
Added new dialplan application misdn_command which permits controlling
the CCBS/CCNR functionality.
Added new dialplan function mISDN_CC which permits retrieval of various
values from an active call completion record.
For PTP, you should manually send the COLR of the redirected-to party
for an incomming redirected call if the incoming call could experience
further redirects. Just set the REDIRECTING(to-num,i) = ${EXTEN} and
set the REDIRECTING(to-pres) to the COLR. A call has been redirected
if the REDIRECTING(from-num) is not empty.
For outgoing PTP redirected calls, you now need to use the inhibit(i)
option on all of the REDIRECTING statements before dialing the
redirected-to party. You still have to set the REDIRECTING(to-xxx,i)
and the REDIRECTING(from-xxx,i) values. The PTP call will update the
redirecting-to presentation (COLR) when it becomes available.
Added outgoing_colp parameter to misdn.conf to filter outgoing COLP
information.
thirdparty mISDN enhancements
mISDN has been modified by Digium, Inc. to greatly expand facility message
support to allow:
Enhanced COLP support for call diversion and transfer.
CCBS/CCNR support.
The latest modified mISDN v1.1.x based version is available at:
http://svn.digium.com/svn/thirdparty/mISDN/trunk
http://svn.digium.com/svn/thirdparty/mISDNuser/trunk
Tagged versions of the modified mISDN code are available under:
http://svn.digium.com/svn/thirdparty/mISDN/tags
http://svn.digium.com/svn/thirdparty/mISDNuser/tags
libpri channel driver (chan_dahdi) DAHDI changes
The channel variable PRIREDIRECTREASON is now just a status variable
and it is also deprecated. Use the REDIRECTING(reason) dialplan function
to read and alter the reason.
For Q.SIG and ETSI PRI/BRI-PTP, you should manually send the COLR of the
redirected-to party for an incomming redirected call if the incoming call
could experience further redirects. Just set the
REDIRECTING(to-num,i) = CALLERID(dnid) and set the REDIRECTING(to-pres)
to the COLR. A call has been redirected if the REDIRECTING(count) is not
zero.
For outgoing Q.SIG and ETSI PRI/BRI-PTP redirected calls, you need to
use the inhibit(i) option on all of the REDIRECTING statements before
dialing the redirected-to party. You still have to set the
REDIRECTING(to-xxx,i) and the REDIRECTING(from-xxx,i) values. The call
will update the redirecting-to presentation (COLR) when it becomes available.
Added the ability to ignore calls that are not in a Multiple Subscriber
Number (MSN) list for PTMP CPE interfaces.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Added dynamic range compression support for dahdi channels. It is
configured via the rxdrc and txdrc parameters in chan_dahdi.conf.
Added support for ISDN calling and called subaddress with partial support
for connected line subaddress.
Added support for BRI PTMP NT mode. (Requires latest LibPRI.)
Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
Added standard location to add options to chan_dahdi dialing:
Dial(DAHDI/g1[/extension[/options]])
Current options:
K(<keypad_digits>)
R Reverse charging indication
Added Reverse Charging Indication (Collect calls) send/receive option.
Send reverse charging in SETUP message with the chan_dahdi R dialing option.
Dial(DAHDI/g1/extension/R)
Access received reverse charge in SETUP message by: ${CHANNEL(reversecharge)}
(requires latest LibPRI)
Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message with the chan_dahdi K(<keypad_digits>)
dialing option. Dial(DAHDI/g1/[~mdavenport:extension]/K(<keypad_digits>))
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
(requires latest LibPRI)
Added ability to send and receive ETSI Explicit Call Transfer (ECT) messages
to eliminate tromboned calls. A tromboned call goes out an interface and comes
back into the same interface. Tromboned calls happen because of call routing,
call deflection, call forwarding, and call transfer.
Added the ability to send and receive ETSI Advice-Of-Charge messages.
Added the ability to support call waiting calls. (The SETUP has no B channel
assigned.)
Added Malicious Call ID (MCID) event to the AMI call event class.
Added Message Waiting Indication (MWI) support for ISDN PTMP endpoints (phones).
Asterisk Manager Interface
The Hangup action now accepts a Cause header which may be used to
set the channel's hangup cause.
sslprivatekey option added to manager.conf and http.conf. Adds the ability
to specify a separate .pem file to hold a private key. By default sslcert
is used to hold both the public and private key.
Options in manager.conf and http.conf with the 'ssl' prefix have been replaced
for options containing the 'tls' prefix. For example, 'sslenable' is now
'tlsenable'. This has been done in effort to keep ssl and tls options consistent
across all .conf files. All affected sample.conf files have been modified to
reflect this change. Previous options such as 'sslenable' still work,
but options with the 'tls' prefix are preferred.
Added a MuteAudio AMI action for muting inbound and/or outbound audio
in a channel. (res_mutestream.so)
The configuration file manager.conf now supports a channelvars option, which
specifies a list of channel variables to include in each channel-oriented
event.
The redirect command now has new parameters ExtraContext, ExtraExtension,
and ExtraPriority to allow redirecting the second channel to a different
location than the first.
Added new event "JabberStatus" in the Jabber module to monitor buddies
status.
Added a "MixMonitorMute" AMI action for muting inbound and/or outbound audio
in a MixMonitor recording.
The 'iax2 show peers' output is now similar to the expected output of
'sip show peers'.
Added Advice-Of-Charge events (AOC-S, AOC-D, and AOC-E) in the new
aoc event class.
Added Advice-Of-Charge manager action, AOCMessage, for generating AOC-D and
AOC-E messages on a channel.
A DBGetComplete event now follows a DBGetResponse, to make the DBGet action
conform more closely to similar events.
Added a new eventfilter option per user to allow whitelisting and blacklisting
of events.
Added optional parkinglot variable for park command.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Channel Event Logging
A new interface, CEL, is introduced here. CEL logs single events, much like
the AMI, but it differs from the AMI in that it logs to db backends much
like CDR does; is based on the event subsystem introduced by Russell, and
can share in all its benefits; allows multiple backends to operate like CDR;
is specialized to event data that would be of concern to billing sytems,
like CDR. Backends for logging and accounting calls have been produced,
but a new CDR backend is still in development.
CDR
'linkedid' and 'peeraccount' are new CDR fields available to CDR aficionados.
linkedid is based on uniqueID, but spreads to other channels as transfers, dials,
etc are performed. Thus the pieces of CDR can be grouped into multilegged sets.
Multiple files and formats can now be specified in cdr_custom.conf.
cdr_syslog has been added which allows CDRs to be written directly to syslog.
See configs/cdr_syslog.conf.sample for more information.
A 'sequence' field has been added to CDRs which can be combined with
linkedid or uniqueid to uniquely identify a CDR.
Handling of billsec and duration field has changed. If your table definition
specifies those fields as float,double or similar they will now be logged with
microsecond accuracy instead of a whole integer.
Calendaring for Asterisk
A new set of modules were added supporing calendar integration with Asterisk.
Dialplan functions for reading from and writing to calendars are included,
as well as the ability to execute dialplan logic upon calendar event notifications.
iCalendar, CalDAV, and Exchange Server calendars (via res_calendar_exchange for
Exchange Server 2003 with no write or attendee support, and res_calendar_ews for
Exchange Server 2007+ with full write and attendee support) are supported (Exchange
2003 support does not support forms-based authentication).
Call Completion Supplementary Services for Asterisk
Call completion support has been added for SIP, DAHDI/ISDN, and DAHDI/analog.
DAHDI/ISDN supports call completion for the following switch types:
EuroIsdn(ETSI) for PTP and PTMP modes, and Qsig.
See http://wiki.asterisk.org for details.
Multicast RTP Support
A new RTP engine and channel driver have been added which supports Multicast RTP.
The channel driver can be used with the Page application to perform multicast RTP
paging. The dial string format is: MulticastRTP/<type>/<destination>/<control address>
Type can be either basic or linksys.
Destination is the IP address and port for the RTP packets.
Control address is specific to the linksys type and is used for sending the control
packets unique to them.
Security Events Framework
Asterisk has a new C API for reporting security events. The module res_security_log
sends these events to the "security" logger level. Currently, AMI is the only
Asterisk component that reports security events. However, SIP support will be
coming soon. For more information on the security events framework, see the
"Security Events" chapter of the included documentation - doc/AST.pdf.
Fax
A technology independent fax frontend (res_fax) has been added to Asterisk.
A spandsp based fax backend (res_fax_spandsp) has been added.
The app_fax module has been deprecated in favor of the res_fax module and
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
the new res_fax_spandsp backend.
The SendFAX and ReceiveFAX applications now send their log messages to a
'fax' logger level, instead of to the generic logger levels. To see these
messages, the system's logger.conf file will need to direct the 'fax' logger
level to one or more destinations; the logger.conf.sample file includes an
example of how to do this. Note that if the 'fax' logger level is not
directed to at least one destination, log messages generated by these
applications will be lost, and that if the 'fax' logger level is directed to
the console, the 'core set verbose' and 'core set debug' CLI commands will
have no effect on whether the messages appear on the console or not.
Miscellaneous
The transmit_silence_during_record option in asterisk.conf.sample has been removed.
Now, in order to enable transmitting silence during record the transmit_silence
option should be used. transmit_silence_during_record remains a valid option, but
defaults to the behavior of the transmit_silence option.
Addition of the Unit Test Framework API for managing registration and execution
of unit tests with the purpose of verifying the operation of C functions.
SendText is now implemented in chan_gtalk and chan_jingle. It will simply send
XMPP text messages to the remote JID.
Modules.conf has a new option - "require" - that marks a module as critical for
the execution of Asterisk.
If one of the required modules fail to load, Asterisk will exit with a return
code set to 2.
An 'X' option has been added to the asterisk application which enables #exec support.
This allows #exec to be used in asterisk.conf.
jabber.conf supports a new option auth_policy that toggles auto user registration.
A new lockconfdir option has been added to asterisk.conf to protect the
configuration directory (/etc/asterisk by default) during reloads.
The parkeddynamic option has been added to features.conf to enable the creation
of dynamic parkinglots.
chan_dahdi now supports reporting alarms over AMI either by channel or span via
the reportalarms config option.
chan_dahdi supports dialing configuring and dialing by device file name.
DAHDI/span-name!local!1 will use /dev/dahdi/span-name/local/1 . Likewise
it may appear in chan_dahdi.conf as 'channel => span-name!local!1'.
A new options for chan_dahdi.conf: 'ignore_failed_channels'. Boolean.
False by default. If set, chan_dahdi will ignore failed 'channel' entries.
Handy for the above name-based syntax as it does not depend on
initialization order.
The Realtime dialplan switch now caches entries for 1 second. This provides a
significant increase in performance (about 3X) for installations using this switchtype.
Distributed devicestate now supports the use of the XMPP protocol, in addition to
AIS. For more information, please see http://wiki.asterisk.org
The addition of G.719 pass-through support.
Added support for 16khz Speex audio. This can be enabled by using 'allow=speex16'
during device configuration.
The UNISTIM channel driver (chan_unistim) has been updated to support devices that
have less than 3 lines on the LCD.
Realtime now supports database failover. See the sample extconfig.conf for details.
The addition of improved translation path building for wideband codecs. Sample
rate changes during translation are now avoided unless absolutely necessary.
The addition of the res_stun_monitor module for monitoring and reacting to network
changes while behind a NAT.
CLI Changes
The 'core set debug' and 'core set verbose' commands, in previous versions, could
optionally accept a filename, to apply the setting only to the code generated from
that source file when Asterisk was built. However, there are some modules in Asterisk
that are composed of multiple source files, so this did not result in the behavior
that users expected. In this version, 'core set debug' and 'core set verbose'
can optionally accept module names instead (with or without the .so extension),
which applies the setting to the entire module specified, regardless of which source
files it was built from.
New 'manager show settings' command showing the current settings loaded from
manager.conf.
Added 'all' keyword to the CLI command "channel request hangup" so that you can send
the channel hangup request to all channels.
Added a "core reload" CLI command that executes a global reload of Asterisk.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Asterisk Command Reference
This page is the top level page for all of the Asterisk applications, functions, manager actions,
and AGI commands that are kept in the XML based documentation that is included with Asterisk.
AGI Commands
AGICommand_ANSWER
ANSWER
Synopsis
Answer channel
Description
Answers channel if not already in answer state. Returns -1 on channel failure, or 0 if successful.
Syntax
ANSWER
Arguments
See Also
AGICommand_HANGUP
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_ASYNCAGI BREAK
ASYNCAGI BREAK
Synopsis
Interrupts Async AGI
Description
Interrupts expected flow of Async AGI commands and returns control to previous source
(typically, the PBX dialplan).
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ASYNCAGI BREAK
Arguments
See Also
AGICommand_HANGUP
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_CHANNEL STATUS
CHANNEL STATUS
Synopsis
Returns status of the connected channel.
Description
Returns the status of the specified channelname. If no channel name is given then returns the
status of the current channel.
Return values:
Channel is down and available.
Channel is down, but reserved.
Channel is off hook.
Digits (or equivalent) have been dialed.
Line is ringing.
Remote end is ringing.
Line is up.
Line is busy.
Syntax
CHANNEL STATUS [CHANNELNAME]
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
CHANNELNAME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_CONTROL STREAM FILE
CONTROL STREAM FILE
Synopsis
Sends audio file on channel and allows the listener to control the stream.
Description
Send the given file, allowing playback to be controlled by the given digits, if any. Use double
quotes for the digits if you wish none to be permitted. Returns 0 if playback completes without a
digit being pressed, or the ASCII numerical value of the digit if one was pressed, or -1 on error
or if the channel was disconnected.
Syntax
CONTROL STREAM FILE FILENAME ESCAPE_DIGITS [SKIPMS] [FFCHAR]
[REWCHR] [PAUSECHR]
Arguments
FILENAME - The file extension must not be included in the filename.
ESCAPE_DIGITS
SKIPMS
FFCHAR - Defaults to *
REWCHR - Defaults to #
PAUSECHR
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_DATABASE DEL
DATABASE DEL
Synopsis
Removes database key/value
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Deletes an entry in the Asterisk database for a given family and key.
Returns 1 if successful, 0 otherwise.
Syntax
DATABASE DEL FAMILY KEY
Arguments
FAMILY
KEY
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_DATABASE DELTREE
DATABASE DELTREE
Synopsis
Removes database keytree/value
Description
Deletes a family or specific keytree within a family in the Asterisk database.
Returns 1 if successful, 0 otherwise.
Syntax
DATABASE DELTREE FAMILY [KEYTREE]
Arguments
FAMILY
KEYTREE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_DATABASE GET
DATABASE GET
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Gets database value
Description
Retrieves an entry in the Asterisk database for a given family and key.
Returns 0 if key is not set. Returns 1 if key is set and returns the variable in parenthesis.
Example return code: 200 result=1 (testvariable)
Syntax
DATABASE GET FAMILY KEY
Arguments
FAMILY
KEY
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_DATABASE PUT
DATABASE PUT
Synopsis
Adds/updates database value
Description
Adds or updates an entry in the Asterisk database for a given family, key, and value.
Returns 1 if successful, 0 otherwise.
Syntax
DATABASE PUT FAMILY KEY VALUE
Arguments
FAMILY
KEY
VALUE
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_EXEC
EXEC
Synopsis
Executes a given Application
Description
Executes application with given options.
Returns whatever the application returns, or -2 on failure to find application.
Syntax
EXEC APPLICATION OPTIONS
Arguments
APPLICATION
OPTIONS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_GET DATA
GET DATA
Synopsis
Prompts for DTMF on a channel
Description
Stream the given file, and receive DTMF data.
Returns the digits received from the channel at the other end.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
GET DATA FILE [TIMEOUT] [MAXDIGITS]
Arguments
FILE
TIMEOUT
MAXDIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_GET FULL VARIABLE
GET FULL VARIABLE
Synopsis
Evaluates a channel expression
Description
Returns 0 if variablename is not set or channel does not exist. Returns 1 if variablename is set
and returns the variable in parenthesis. Understands complex variable names and builtin
variables, unlike GET VARIABLE.
Example return code: 200 result=1 (testvariable)
Syntax
GET FULL VARIABLE VARIABLENAME [CHANNEL_NAME]
Arguments
VARIABLENAME
CHANNEL_NAME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_GET OPTION
GET OPTION
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Stream file, prompt for DTMF, with timeout.
Description
Behaves similar to STREAM FILE but used with a timeout option.
Syntax
GET OPTION FILENAME ESCAPE_DIGITS [TIMEOUT]
Arguments
FILENAME
ESCAPE_DIGITS
TIMEOUT
See Also
AGICommand_STREAM FILE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_GET VARIABLE
GET VARIABLE
Synopsis
Gets a channel variable.
Description
Returns 0 if variablename is not set. Returns 1 if variablename is set and returns the variable in
parentheses.
Example return code: 200 result=1 (testvariable)
Syntax
GET VARIABLE VARIABLENAME
Arguments
VARIABLENAME
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_GOSUB
GOSUB
Synopsis
Cause the channel to execute the specified dialplan subroutine.
Description
Cause the channel to execute the specified dialplan subroutine, returning to the dialplan with
execution of a Return().
Syntax
GOSUB CONTEXT EXTENSION PRIORITY [OPTIONAL-ARGUMENT]
Arguments
CONTEXT
EXTENSION
PRIORITY
OPTIONAL-ARGUMENT
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_HANGUP
HANGUP
Synopsis
Hangup a channel.
Description
Hangs up the specified channel. If no channel name is given, hangs up the current channel
Syntax
HANGUP [CHANNELNAME]
Arguments
CHANNELNAME
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r323234.
AGICommand_NOOP
NOOP
Synopsis
Does nothing.
Description
Does nothing.
Syntax
NOOP
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_RECEIVE CHAR
RECEIVE CHAR
Synopsis
Receives one character from channels supporting it.
Description
Receives a character of text on a channel. Most channels do not support the reception of text.
Returns the decimal value of the character if one is received, or 0 if the channel does not support
text reception. Returns -1 only on error/hangup.
Syntax
RECEIVE CHAR TIMEOUT
Arguments
TIMEOUT - The maximum time to wait for input in milliseconds, or 0 for infinite. Most channels
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_RECEIVE TEXT
RECEIVE TEXT
Synopsis
Receives text from channels supporting it.
Description
Receives a string of text on a channel. Most channels do not support the reception of text.
Returns -1 for failure or 1 for success, and the string in parenthesis.
Syntax
RECEIVE TEXT TIMEOUT
Arguments
TIMEOUT - The timeout to be the maximum time to wait for input in milliseconds, or 0 for infinite.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_RECORD FILE
RECORD FILE
Synopsis
Records to a given file.
Description
Record to a file until a given dtmf digit in the sequence is received. Returns -1 on hangup or
error. The format will specify what kind of file will be recorded. The timeout is the maximum
record time in milliseconds, or -1 for no timeout. offset samples is optional, and, if provided, will
seek to the offset without exceeding the end of the file. silence is the number of seconds of
silence allowed before the function returns despite the lack of dtmf digits or reaching timeout.
silence value must be preceded by s= and is also optional.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
RECORD FILE FILENAME FORMAT ESCAPE_DIGITS TIMEOUT [OFFSET_SAMPLES]
[BEEP] [S=SILENCE]
Arguments
FILENAME
FORMAT
ESCAPE_DIGITS
TIMEOUT
OFFSET_SAMPLES
BEEP
S=SILENCE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY ALPHA
SAY ALPHA
Synopsis
Says a given character string.
Description
Say a given character string, returning early if any of the given DTMF digits are received on the
channel. Returns 0 if playback completes without a digit being pressed, or the ASCII numerical
value of the digit if one was pressed or -1 on error/hangup.
Syntax
SAY ALPHA NUMBER ESCAPE_DIGITS
Arguments
NUMBER
ESCAPE_DIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY DATE
SAY DATE
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Says a given date.
Description
Say a given date, returning early if any of the given DTMF digits are received on the channel.
Returns 0 if playback completes without a digit being pressed, or the ASCII numerical value of
the digit if one was pressed or -1 on error/hangup.
Syntax
SAY DATE DATE ESCAPE_DIGITS
Arguments
DATE - Is number of seconds elapsed since 00:00:00 on January 1, 1970. Coordinated Universal Time (UTC).
ESCAPE_DIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY DATETIME
SAY DATETIME
Synopsis
Says a given time as specified by the format given.
Description
Say a given time, returning early if any of the given DTMF digits are received on the channel.
Returns 0 if playback completes without a digit being pressed, or the ASCII numerical value of
the digit if one was pressed or -1 on error/hangup.
Syntax
SAY DATETIME TIME ESCAPE_DIGITS [FORMAT] [TIMEZONE]
Arguments
TIME - Is number of seconds elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC)
ESCAPE_DIGITS
FORMAT - Is the format the time should be said in. See voicemail.conf (defaults to ABdY 'digits/at' IMp ).
TIMEZONE - Acceptable values can be found in /usr/share/zoneinfo Defaults to machine default.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY DIGITS
SAY DIGITS
Synopsis
Says a given digit string.
Description
Say a given digit string, returning early if any of the given DTMF digits are received on the
channel. Returns 0 if playback completes without a digit being pressed, or the ASCII numerical
value of the digit if one was pressed or -1 on error/hangup.
Syntax
SAY DIGITS NUMBER ESCAPE_DIGITS
Arguments
NUMBER
ESCAPE_DIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY NUMBER
SAY NUMBER
Synopsis
Says a given number.
Description
Say a given number, returning early if any of the given DTMF digits are received on the channel.
Returns 0 if playback completes without a digit being pressed, or the ASCII numerical value of
the digit if one was pressed or -1 on error/hangup.
Syntax
SAY NUMBER NUMBER ESCAPE_DIGITS [GENDER]
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
NUMBER
ESCAPE_DIGITS
GENDER
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY PHONETIC
SAY PHONETIC
Synopsis
Says a given character string with phonetics.
Description
Say a given character string with phonetics, returning early if any of the given DTMF digits are
received on the channel. Returns 0 if playback completes without a digit pressed, the ASCII
numerical value of the digit if one was pressed, or -1 on error/hangup.
Syntax
SAY PHONETIC STRING ESCAPE_DIGITS
Arguments
STRING
ESCAPE_DIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SAY TIME
SAY TIME
Synopsis
Says a given time.
Description
Say a given time, returning early if any of the given DTMF digits are received on the channel.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Returns 0 if playback completes without a digit being pressed, or the ASCII numerical value of
the digit if one was pressed or -1 on error/hangup.
Syntax
SAY TIME TIME ESCAPE_DIGITS
Arguments
TIME - Is number of seconds elapsed since 00:00:00 on January 1, 1970. Coordinated Universal Time (UTC).
ESCAPE_DIGITS
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SEND IMAGE
SEND IMAGE
Synopsis
Sends images to channels supporting it.
Description
Sends the given image on a channel. Most channels do not support the transmission of images.
Returns 0 if image is sent, or if the channel does not support image transmission. Returns -1
only on error/hangup. Image names should not include extensions.
Syntax
SEND IMAGE IMAGE
Arguments
IMAGE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SEND TEXT
SEND TEXT
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Sends text to channels supporting it.
Description
Sends the given text on a channel. Most channels do not support the transmission of text.
Returns 0 if text is sent, or if the channel does not support text transmission. Returns -1 only on
error/hangup.
Syntax
SEND TEXT TEXT_TO_SEND
Arguments
TEXT_TO_SEND - Text consisting of greater than one word should be placed in quotes since the command only accepts a single
argument.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SET AUTOHANGUP
SET AUTOHANGUP
Synopsis
Autohangup channel in some time.
Description
Cause the channel to automatically hangup at time seconds in the future. Of course it can be
hungup before then as well. Setting to 0 will cause the autohangup feature to be disabled on this
channel.
Syntax
SET AUTOHANGUP TIME
Arguments
TIME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
AGICommand_SET CALLERID
SET CALLERID
Synopsis
Sets callerid for the current channel.
Description
Changes the callerid of the current channel.
Syntax
SET CALLERID NUMBER
Arguments
NUMBER
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SET CONTEXT
SET CONTEXT
Synopsis
Sets channel context.
Description
Sets the context for continuation upon exiting the application.
Syntax
SET CONTEXT DESIRED_CONTEXT
Arguments
DESIRED_CONTEXT
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
AGICommand_SET EXTENSION
SET EXTENSION
Synopsis
Changes channel extension.
Description
Changes the extension for continuation upon exiting the application.
Syntax
SET EXTENSION NEW_EXTENSION
Arguments
NEW_EXTENSION
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SET MUSIC
SET MUSIC
Synopsis
Enable/Disable Music on hold generator
Description
Enables/Disables the music on hold generator. If class is not specified, then the default music
on hold class will be used.
Always returns 0.
Syntax
SET MUSIC UNNAMED_PARAMETER CLASS
Arguments
UNNAMED_PARAMETER
Unnamed Option
Unnamed Option
CLASS
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SET PRIORITY
SET PRIORITY
Synopsis
Set channel dialplan priority.
Description
Changes the priority for continuation upon exiting the application. The priority must be a valid
priority or label.
Syntax
SET PRIORITY PRIORITY
Arguments
PRIORITY
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SET VARIABLE
SET VARIABLE
Synopsis
Sets a channel variable.
Description
Sets a variable to the current channel.
Syntax
SET VARIABLE VARIABLENAME VALUE
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
VARIABLENAME
VALUE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH ACTIVATE GRAMMAR
SPEECH ACTIVATE GRAMMAR
Synopsis
Activates a grammar.
Description
Activates the specified grammar on the speech object.
Syntax
SPEECH ACTIVATE GRAMMAR GRAMMAR_NAME
Arguments
GRAMMAR_NAME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH CREATE
SPEECH CREATE
Synopsis
Creates a speech object.
Description
Create a speech object to be used by the other Speech AGI commands.
Syntax
SPEECH CREATE ENGINE
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
ENGINE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH DEACTIVATE GRAMMAR
SPEECH DEACTIVATE GRAMMAR
Synopsis
Deactivates a grammar.
Description
Deactivates the specified grammar on the speech object.
Syntax
SPEECH DEACTIVATE GRAMMAR GRAMMAR_NAME
Arguments
GRAMMAR_NAME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH DESTROY
SPEECH DESTROY
Synopsis
Destroys a speech object.
Description
Destroy the speech object created by SPEECH CREATE.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SPEECH DESTROY
Arguments
See Also
AGICommand_SPEECH CREATE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH LOAD GRAMMAR
SPEECH LOAD GRAMMAR
Synopsis
Loads a grammar.
Description
Loads the specified grammar as the specified name.
Syntax
SPEECH LOAD GRAMMAR GRAMMAR_NAME PATH_TO_GRAMMAR
Arguments
GRAMMAR_NAME
PATH_TO_GRAMMAR
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH RECOGNIZE
SPEECH RECOGNIZE
Synopsis
Recognizes speech.
Description
Plays back given prompt while listening for speech and dtmf.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
SPEECH RECOGNIZE PROMPT TIMEOUT [OFFSET]
Arguments
PROMPT
TIMEOUT
OFFSET
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH SET
SPEECH SET
Synopsis
Sets a speech engine setting.
Description
Set an engine-specific setting.
Syntax
SPEECH SET NAME VALUE
Arguments
SPEECH SET
VALUE
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_SPEECH UNLOAD GRAMMAR
SPEECH UNLOAD GRAMMAR
Synopsis
Unloads a grammar.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Unloads the specified grammar.
Syntax
SPEECH UNLOAD GRAMMAR GRAMMAR_NAME
Arguments
GRAMMAR_NAME
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_STREAM FILE
STREAM FILE
Synopsis
Sends audio file on channel.
Description
Send the given file, allowing playback to be interrupted by the given digits, if any. Returns 0 if
playback completes without a digit being pressed, or the ASCII numerical value of the digit if one
was pressed, or -1 on error or if the channel was disconnected.
Syntax
STREAM FILE FILENAME ESCAPE_DIGITS [SAMPLE_OFFSET]
Arguments
FILENAME - File name to play. The file extension must not be included in the filename.
ESCAPE_DIGITS - Use double quotes for the digits if you wish none to be permitted.
SAMPLE_OFFSET - If sample offset is provided then the audio will seek to sample offset before play starts.
See Also
AGICommand_CONTROL STREAM FILE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_TDD MODE
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
TDD MODE
Synopsis
Toggles TDD mode (for the deaf).
Description
Enable/Disable TDD transmission/reception on a channel. Returns 1 if successful, or 0 if channel
is not TDD-capable.
Syntax
TDD MODE BOOLEAN
Arguments
BOOLEAN
on
off
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_VERBOSE
VERBOSE
Synopsis
Logs a message to the asterisk verbose log.
Description
Sends message to the console via verbose message system. level is the verbose level (1-4).
Always returns 1
Syntax
VERBOSE MESSAGE LEVEL
Arguments
MESSAGE
LEVEL
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGICommand_WAIT FOR DIGIT
WAIT FOR DIGIT
Synopsis
Waits for a digit to be pressed.
Description
Waits up to timeout milliseconds for channel to receive a DTMF digit. Returns -1 on channel
failure, 0 if no digit is received in the timeout, or the numerical value of the ascii of the digit if one
is received. Use -1 for the timeout value if you desire the call to block indefinitely.
Syntax
WAIT FOR DIGIT TIMEOUT
Arguments
TIMEOUT
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
AGI Command Template Page
AGI COMMAND
Synopsys
.....
Description
...
Syntax
AGI COMMAND <arg>
Arguments
arg
something
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
options
a
option 'a' is asdfadf
b
option 'b' is asdfasdfadf
c
option 'c' is for cookie
Runs Dead
Yes / No
See Also
Dialplan Function Template Page
Dialplan Application Template Page
AMI Action Template Page
Import Version
This documentation was imported from Asterisk version VERSION STRING HERE.
AMI Actions
AMI Action Template Page
ManagerAction
Synopsys
.....
Description
...
Syntax
Action: ManagerAction
RequiredHeader: Value
[OptionalHeader:] Value
Arguments
RequiredHeader
This header is something that is required.
OptionalHeader
This is some optional header
See Also
Dialplan Application Template Page
Dialplan Function Template Page
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
AGI Command Template Page
Import Version
This documentation was imported from Asterisk version VERSION STRING HERE.
ManagerAction_AbsoluteTimeout
AbsoluteTimeout
Synopsis
Set absolute timeout.
Description
Hangup a channel after a certain time. Acknowledges set time with Timeout Set message.
Syntax
Action: AbsoluteTimeout
[ActionID:] <value>
Channel: <value>
Timeout: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel name to hangup.
Timeout - Maximum duration of the call (sec).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_AgentLogoff
AgentLogoff
Synopsis
Sets an agent as no longer logged in.
Description
Sets an agent as no longer logged in.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: AgentLogoff
[ActionID:] <value>
Agent: <value>
[Soft:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Agent - Agent ID of the agent to log off.
Soft - Set to true to not hangup existing calls.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Agents
Agents
Synopsis
Lists agents and their status.
Description
Will list info about all possible agents.
Syntax
Action: Agents
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_AGI
AGI
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Add an AGI command to execute by Async AGI.
Description
Add an AGI command to the execute queue of the channel in Async AGI.
Syntax
Action: AGI
[ActionID:] <value>
Channel: <value>
Command: <value>
[CommandID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel that is currently in Async AGI.
Command - Application to execute.
CommandID - This will be sent back in CommandID header of AsyncAGI exec event notification.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_AOCMessage
AOCMessage
Synopsis
Generate an Advice of Charge message on a channel.
Description
Generates an AOC-D or AOC-E message on a channel.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: AOCMessage
[ActionID:] <value>
Channel: <value>
[ChannelPrefix:] <value>
MsgType: <value>
ChargeType: <value>
[UnitAmount(0):] <value>
[UnitType(0):] <value>
[CurrencyName:] <value>
[CurrencyAmount:] <value>
[CurrencyMultiplier:] <value>
[TotalType:] <value>
[AOCBillingId:] <value>
[ChargingAssociationId:] <value>
[ChargingAssociationNumber:] <value>
[ChargingAssociationPlan:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel name to generate the AOC message on.
ChannelPrefix - Partial channel prefix. By using this option one can match the beginning part of a channel name without having to put
the entire name in. For example if a channel name is SIP/snom-00000001 and this value is set to SIP/snom, then that channel matches
and the message will be sent. Note however that only the first matched channel has the message sent on it.
MsgType - Defines what type of AOC message to create, AOC-D or AOC-E
D
E
ChargeType - Defines what kind of charge this message represents.
NA
FREE
Currency
Unit
UnitAmount(0) - This represents the amount of units charged. The ETSI AOC standard specifies that this value along with the optional
UnitType value are entries in a list. To accommodate this these values take an index value starting at 0 which can be used to generate
this list of unit entries. For Example, If two unit entires were required this could be achieved by setting the paramter UnitAmount(0)=1234
and UnitAmount(1)=5678. Note that UnitAmount at index 0 is required when ChargeType=Unit, all other entries in the list are optional.
UnitType(0) - Defines the type of unit. ETSI AOC standard specifies this as an integer value between 1 and 16, but this value is left
open to accept any positive integer. Like the UnitAmount parameter, this value represents a list entry and has an index parameter that
starts at 0.
CurrencyName - Specifies the currency's name. Note that this value is truncated after 10 characters.
CurrencyAmount - Specifies the charge unit amount as a positive integer. This value is required when ChargeType==Currency.
CurrencyMultiplier - Specifies the currency multiplier. This value is required when ChargeType==Currency.
OneThousandth
OneHundredth
OneTenth
One
Ten
Hundred
Thousand
TotalType - Defines what kind of AOC-D total is represented.
Total
SubTotal
AOCBillingId - Represents a billing ID associated with an AOC-D or AOC-E message. Note that only the first 3 items of the enum are
valid AOC-D billing IDs
Normal
ReverseCharge
CreditCard
CallFwdUnconditional
CallFwdBusy
CallFwdNoReply
CallDeflection
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
CallTransfer
ChargingAssociationId - Charging association identifier. This is optional for AOC-E and can be set to any value between -32768
and 32767
ChargingAssociationNumber - Represents the charging association party number. This value is optional for AOC-E.
ChargingAssociationPlan - Integer representing the charging plan associated with the ChargingAssociationNumber. The value is
bits 7 through 1 of the Q.931 octet containing the type-of-number and numbering-plan-identification fields.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Atxfer
Atxfer
Synopsis
Attended transfer.
Description
Attended transfer.
Syntax
Action: Atxfer
[ActionID:] <value>
Channel: <value>
Exten: <value>
Context: <value>
Priority: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Transferer's channel.
Exten - Extension to transfer to.
Context - Context to transfer to.
Priority - Priority to transfer to.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Bridge
Bridge
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Bridge two channels already in the PBX.
Description
Bridge together two channels already in the PBX.
Syntax
Action: Bridge
[ActionID:] <value>
Channel1: <value>
Channel2: <value>
[Tone:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel1 - Channel to Bridge to Channel2.
Channel2 - Channel to Bridge to Channel1.
Tone - Play courtesy tone to Channel 2.
yes
no
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Challenge
Challenge
Synopsis
Generate Challenge for MD5 Auth.
Description
Generate a challenge for MD5 authentication.
Syntax
Action: Challenge
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ChangeMonitor
ChangeMonitor
Synopsis
Change monitoring filename of a channel.
Description
This action may be used to change the file started by a previous 'Monitor' action.
Syntax
Action: ChangeMonitor
[ActionID:] <value>
Channel: <value>
File: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Used to specify the channel to record.
File - Is the new name of the file created in the monitor spool directory.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Command
Command
Synopsis
Execute Asterisk CLI Command.
Description
Run a CLI command.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: Command
[ActionID:] <value>
Command: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Command - Asterisk CLI command to run.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_CoreSettings
CoreSettings
Synopsis
Show PBX core settings (version etc).
Description
Query for Core PBX settings.
Syntax
Action: CoreSettings
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_CoreShowChannels
CoreShowChannels
Synopsis
List currently active channels.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
List currently defined channels and some information about them.
Syntax
Action: CoreShowChannels
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_CoreStatus
CoreStatus
Synopsis
Show PBX core status variables.
Description
Query for Core PBX status.
Syntax
Action: CoreStatus
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_CreateConfig
CreateConfig
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Creates an empty file in the configuration directory.
Description
This action will create an empty file in the configuration directory. This action is intended to be
used before an UpdateConfig action.
Syntax
Action: CreateConfig
[ActionID:] <value>
Filename: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Filename - The configuration filename to create (e.g. foo.conf ).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_DAHDIDialOffhook
DAHDIDialOffhook
Synopsis
Dial over DAHDI channel while offhook.
Description
Generate DTMF control frames to the bridged peer.
Syntax
Action: DAHDIDialOffhook
[ActionID:] <value>
DAHDIChannel: <value>
Number: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - DAHDI channel number to dial digits.
Number - Digits to dial.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDIDNDoff
DAHDIDNDoff
Synopsis
Toggle DAHDI channel Do Not Disturb status OFF.
Description
Equivalent to the CLI command "dahdi set dnd Equivalent to the CLI command "dahdi set dnd
None - channel off".
Feature only supported by analog channels.Feature only supported by analog channels.
Syntax
Action: DAHDIDNDoff
[ActionID:] <value>
DAHDIChannel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - DAHDI channel number to set DND off.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDIDNDon
DAHDIDNDon
Synopsis
Toggle DAHDI channel Do Not Disturb status ON.
Description
Equivalent to the CLI command "dahdi set dnd Equivalent to the CLI command "dahdi set dnd
None - channel on".
Feature only supported by analog channels.Feature only supported by analog channels.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
Action: DAHDIDNDon
[ActionID:] <value>
DAHDIChannel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - DAHDI channel number to set DND on.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDIHangup
DAHDIHangup
Synopsis
Hangup DAHDI Channel.
Description
Simulate an on-hook event by the user connected to the channel.
Valid only for analog channels.Valid only for analog channels.
Syntax
Action: DAHDIHangup
[ActionID:] <value>
DAHDIChannel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - DAHDI channel number to hangup.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDIRestart
DAHDIRestart
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Fully Restart DAHDI channels (terminates calls).
Description
Equivalent to the CLI command "dahdi restart".
Syntax
Action: DAHDIRestart
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDIShowChannels
DAHDIShowChannels
Synopsis
Show status of DAHDI channels.
Description
Similar to the CLI command "dahdi show channels".
Syntax
Action: DAHDIShowChannels
[ActionID:] <value>
[DAHDIChannel:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - Specify the specific channel number to show. Show all channels if zero or not present.
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DAHDITransfer
DAHDITransfer
Synopsis
Transfer DAHDI Channel.
Description
Simulate a flash hook event by the user connected to the channel.
Valid only for analog channels.Valid only for analog channels.
Syntax
Action: DAHDITransfer
[ActionID:] <value>
DAHDIChannel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
DAHDIChannel - DAHDI channel number to transfer.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r331774.
ManagerAction_DataGet
DataGet
Synopsis
Retrieve the data api tree.
Description
Retrieve the data api tree.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: DataGet
[ActionID:] <value>
Path: <value>
[Search:] <value>
[Filter:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Path
Search
Filter
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_DBDel
DBDel
Synopsis
Delete DB entry.
Description
Syntax
Action: DBDel
[ActionID:] <value>
Family: <value>
Key: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Family
Key
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_DBDelTree
DBDelTree
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Delete DB Tree.
Description
Syntax
Action: DBDelTree
[ActionID:] <value>
Family: <value>
[Key:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Family
Key
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_DBGet
DBGet
Synopsis
Get DB Entry.
Description
Syntax
Action: DBGet
[ActionID:] <value>
Family: <value>
Key: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Family
Key
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_DBPut
DBPut
Synopsis
Put DB entry.
Description
Syntax
Action: DBPut
[ActionID:] <value>
Family: <value>
Key: <value>
[Val:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Family
Key
Val
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Events
Events
Synopsis
Control Event Flow.
Description
Enable/Disable sending of events to this manager client.
Syntax
Action: Events
[ActionID:] <value>
EventMask: <value>
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
ActionID - ActionID for this transaction. Will be returned.
EventMask
on - If all events should be sent.
off - If no events should be sent.
system,call,log,... - To select which flags events should have to be sent.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ExtensionState
ExtensionState
Synopsis
Check Extension Status.
Description
Report the extension state for given extension. If the extension has a hint, will use devicestate to
check the status of the device connected to the extension.
Will return an Extension Status message. The response will include the hint for the
extension and the status.
Syntax
Action: ExtensionState
[ActionID:] <value>
Exten: <value>
Context: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Exten - Extension to check state on.
Context - Context for extension.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_GetConfig
GetConfig
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Retrieve configuration.
Description
This action will dump the contents of a configuration file by category and contents or optionally by
specified category only.
Syntax
Action: GetConfig
[ActionID:] <value>
Filename: <value>
[Category:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Filename - Configuration filename (e.g. foo.conf ).
Category - Category in configuration file.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_GetConfigJSON
GetConfigJSON
Synopsis
Retrieve configuration (JSON format).
Description
This action will dump the contents of a configuration file by category and contents in JSON
format. This only makes sense to be used using rawman over the HTTP interface.
Syntax
Action: GetConfigJSON
[ActionID:] <value>
Filename: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Filename - Configuration filename (e.g. foo.conf ).
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Getvar
Getvar
Synopsis
Gets a channel variable.
Description
Get the value of a global or local channel variable.
Syntax
Action: Getvar
[ActionID:] <value>
[Channel:] <value>
Variable: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel to read variable from.
Variable - Variable name.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Hangup
Hangup
Synopsis
Hangup channel.
Description
Hangup a channel.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: Hangup
[ActionID:] <value>
Channel: <value>
[Cause:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - The channel name to be hangup.
Cause - Numeric hangup cause.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_IAXnetstats
IAXnetstats
Synopsis
Show IAX Netstats.
Description
Show IAX channels network statistics.
Syntax
Action: IAXnetstats
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_IAXpeerlist
IAXpeerlist
Synopsis
List IAX Peers.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
List all the IAX peers.
Syntax
Action: IAXpeerlist
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_IAXpeers
IAXpeers
Synopsis
List IAX peers.
Description
Syntax
Action: IAXpeers
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_IAXregistry
IAXregistry
Synopsis
Show IAX registrations.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Show IAX registrations.
Syntax
Action: IAXregistry
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_JabberSend
JabberSend
Synopsis
Sends a message to a Jabber Client.
Description
Sends a message to a Jabber Client.
Syntax
Action: JabberSend
[ActionID:] <value>
Jabber: <value>
JID: <value>
Message: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Jabber - Client or transport Asterisk uses to connect to JABBER.
JID - XMPP/Jabber JID (Name) of recipient.
Message - Message to be sent to the buddy.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ManagerAction_ListCategories
ListCategories
Synopsis
List categories in configuration file.
Description
This action will dump the categories in a given file.
Syntax
Action: ListCategories
[ActionID:] <value>
Filename: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Filename - Configuration filename (e.g. foo.conf ).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ListCommands
ListCommands
Synopsis
List available manager commands.
Description
Returns the action name and synopsis for every action that is available to the user.
Syntax
Action: ListCommands
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_LocalOptimizeAway
LocalOptimizeAway
Synopsis
Optimize away a local channel when possible.
Description
A local channel created with "/n" will not automatically optimize away. Calling this command on
the local channel will clear that flag and allow it to optimize away if it's bridged or when it
becomes bridged.
Syntax
Action: LocalOptimizeAway
[ActionID:] <value>
Channel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - The channel name to optimize away.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Login
Login
Synopsis
Login Manager.
Description
Login Manager.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: Login
[ActionID:] <value>
Username: <value>
[Secret:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Username - Username to login with as specified in manager.conf.
Secret - Secret to login with as specified in manager.conf.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r324178.
ManagerAction_Logoff
Logoff
Synopsis
Logoff Manager.
Description
Logoff the current manager session.
Syntax
Action: Logoff
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_MailboxCount
MailboxCount
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Check Mailbox Message Count.
Description
Checks a voicemail account for new messages.
Returns number of urgent, new and old messages.
Message: Mailbox Message Count
Mailbox: mailboxid
UrgentMessages: count
NewMessages: count
OldMessages: count
Syntax
Action: MailboxCount
[ActionID:] <value>
Mailbox: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Mailbox - Full mailbox ID mailbox @ vm-context.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_MailboxStatus
MailboxStatus
Synopsis
Check mailbox.
Description
Checks a voicemail account for status.
Returns number of messages.
Message: Mailbox Status.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Mailbox: mailboxid.
Waiting: count.
Syntax
Action: MailboxStatus
[ActionID:] <value>
Mailbox: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Mailbox - Full mailbox ID mailbox @ vm-context.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_MeetmeList
MeetmeList
Synopsis
List participants in a conference.
Description
Lists all users in a particular MeetMe conference. MeetmeList will follow as separate events,
followed by a final event called MeetmeListComplete.
Syntax
Action: MeetmeList
[ActionID:] <value>
[Conference:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Conference - Conference number.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ManagerAction_MeetmeMute
MeetmeMute
Synopsis
Mute a Meetme user.
Description
Syntax
Action: MeetmeMute
[ActionID:] <value>
Meetme: <value>
Usernum: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Meetme
Usernum
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_MeetmeUnmute
MeetmeUnmute
Synopsis
Unmute a Meetme user.
Description
Syntax
Action: MeetmeUnmute
[ActionID:] <value>
Meetme: <value>
Usernum: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Meetme
Usernum
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_MixMonitorMute
MixMonitorMute
Synopsis
Mute / unMute a Mixmonitor recording.
Description
This action may be used to mute a MixMonitor recording.
Syntax
Action: MixMonitorMute
[ActionID:] <value>
Channel: <value>
[Direction:] <value>
[State:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Used to specify the channel to mute.
Direction - Which part of the recording to mute: read, write or both (from channel, to channel or both channels).
State - Turn mute on or off : 1 to turn on, 0 to turn off.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ModuleCheck
ModuleCheck
Synopsis
Check if module is loaded.
Description
Checks if Asterisk module is loaded. Will return Success/Failure. For success returns, the
module revision number is included.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
Action: ModuleCheck
Module: <value>
Arguments
Module - Asterisk module name (not including extension).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ModuleLoad
ModuleLoad
Synopsis
Module management.
Description
Loads, unloads or reloads an Asterisk module in a running system.
Syntax
Action: ModuleLoad
[ActionID:] <value>
[Module:] <value>
LoadType: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Module - Asterisk module name (including.so extension) or subsystem identifier:
cdr
enum
dnsmgr
extconfig
manager
rtp
http
LoadType - The operation to be done on module. If no module is specified for a reload loadtype, all modules are reloaded.
load
unload
reload
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Monitor
Monitor
Synopsis
Monitor a channel.
Description
This action may be used to record the audio on a specified channel.
Syntax
Action: Monitor
[ActionID:] <value>
Channel: <value>
[File:] <value>
[Format:] <value>
[Mix:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Used to specify the channel to record.
File - Is the name of the file created in the monitor spool directory. Defaults to the same name as the channel (with slashes replaced
with dashes).
Format - Is the audio recording format. Defaults to wav.
Mix - Boolean parameter as to whether to mix the input and output channels together after the recording is finished.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Originate
Originate
Synopsis
Originate a call.
Description
Generates an outgoing call to a Extension / Context / Priority or Application / Data
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: Originate
[ActionID:] <value>
Channel: <value>
[Exten:] <value>
[Context:] <value>
[Priority:] <value>
[Application:] <value>
[Data:] <value>
[Timeout:] <value>
[CallerID:] <value>
[Variable:] <value>
[Account:] <value>
[Async:] <value>
[Codecs:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel name to call.
Exten - Extension to use (requires Context and Priority )
Context - Context to use (requires Exten and Priority )
Priority - Priority to use (requires Exten and Context )
Application - Application to execute.
Data - Data to use (requires Application ).
Timeout - How long to wait for call to be answered (in ms.).
CallerID - Caller ID to be set on the outgoing channel.
Variable - Channel variable to set, multiple Variable: headers are allowed.
Account - Account code.
Async - Set to true for fast origination.
Codecs - Comma-separated list of codecs to use for this call.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Park
Park
Synopsis
Park a channel.
Description
Park a channel.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: Park
[ActionID:] <value>
Channel: <value>
Channel2: <value>
[Timeout:] <value>
[Parkinglot:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel name to park.
Channel2 - Channel to return to if timeout.
Timeout - Number of milliseconds to wait before callback.
Parkinglot - Specify in which parking lot to park the channel.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r334843.
ManagerAction_ParkedCalls
ParkedCalls
Synopsis
List parked calls.
Description
List parked calls.
Syntax
Action: ParkedCalls
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_PauseMonitor
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
PauseMonitor
Synopsis
Pause monitoring of a channel.
Description
This action may be used to temporarily stop the recording of a channel.
Syntax
Action: PauseMonitor
[ActionID:] <value>
Channel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Used to specify the channel to record.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Ping
Ping
Synopsis
Keepalive command.
Description
A 'Ping' action will ellicit a 'Pong' response. Used to keep the manager connection open.
Syntax
Action: Ping
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_PlayDTMF
PlayDTMF
Synopsis
Play DTMF signal on a specific channel.
Description
Plays a dtmf digit on the specified channel.
Syntax
Action: PlayDTMF
[ActionID:] <value>
Channel: <value>
Digit: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel name to send digit to.
Digit - The DTMF digit to play.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueAdd
QueueAdd
Synopsis
Add interface to queue.
Description
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: QueueAdd
[ActionID:] <value>
Queue: <value>
Interface: <value>
[Penalty:] <value>
[Paused:] <value>
[MemberName:] <value>
[StateInterface:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
Interface
Penalty
Paused
MemberName
StateInterface
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueLog
QueueLog
Synopsis
Adds custom entry in queue_log.
Description
Syntax
Action: QueueLog
[ActionID:] <value>
Queue: <value>
Event: <value>
[Uniqueid:] <value>
[Interface:] <value>
[Message:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
Event
Uniqueid
Interface
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Message
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueuePause
QueuePause
Synopsis
Makes a queue member temporarily unavailable.
Description
Syntax
Action: QueuePause
[ActionID:] <value>
Interface: <value>
Paused: <value>
[Queue:] <value>
[Reason:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Interface
Paused
Queue
Reason
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueuePenalty
QueuePenalty
Synopsis
Set the penalty for a queue member.
Description
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: QueuePenalty
[ActionID:] <value>
Interface: <value>
Penalty: <value>
[Queue:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Interface
Penalty
Queue
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueReload
QueueReload
Synopsis
Reload a queue, queues, or any sub-section of a queue or queues.
Description
Syntax
Action: QueueReload
[ActionID:] <value>
[Queue:] <value>
[Members:] <value>
[Rules:] <value>
[Parameters:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
Members
yes
no
Rules
yes
no
Parameters
yes
no
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueRemove
QueueRemove
Synopsis
Remove interface from queue.
Description
Syntax
Action: QueueRemove
[ActionID:] <value>
Queue: <value>
Interface: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
Interface
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueReset
QueueReset
Synopsis
Reset queue statistics.
Description
Syntax
Action: QueueReset
[ActionID:] <value>
[Queue:] <value>
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ActionID - ActionID for this transaction. Will be returned.
Queue
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueRule
QueueRule
Synopsis
Queue Rules.
Description
Syntax
Action: QueueRule
[ActionID:] <value>
[Rule:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Rule
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Queues
Queues
Synopsis
Queues.
Description
Syntax
Action: Queues
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r325740.
ManagerAction_QueueStatus
QueueStatus
Synopsis
Show queue status.
Description
Syntax
Action: QueueStatus
[ActionID:] <value>
[Queue:] <value>
[Member:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
Member
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_QueueSummary
QueueSummary
Synopsis
Show queue summary.
Description
Syntax
Action: QueueSummary
[ActionID:] <value>
[Queue:] <value>
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
ActionID - ActionID for this transaction. Will be returned.
Queue
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Redirect
Redirect
Synopsis
Redirect (transfer) a call.
Description
Redirect (transfer) a call.
Syntax
Action: Redirect
[ActionID:] <value>
Channel: <value>
[ExtraChannel:] <value>
Exten: <value>
[ExtraExten:] <value>
Context: <value>
[ExtraContext:] <value>
Priority: <value>
[ExtraPriority:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel to redirect.
ExtraChannel - Second call leg to transfer (optional).
Exten - Extension to transfer to.
ExtraExten - Extension to transfer extrachannel to (optional).
Context - Context to transfer to.
ExtraContext - Context to transfer extrachannel to (optional).
Priority - Priority to transfer to.
ExtraPriority - Priority to transfer extrachannel to (optional).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ManagerAction_Reload
Reload
Synopsis
Send a reload event.
Description
Send a reload event.
Syntax
Action: Reload
[ActionID:] <value>
[Module:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Module - Name of the module to reload.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SendText
SendText
Synopsis
Send text message to channel.
Description
Sends A Text Message to a channel while in a call.
Syntax
Action: SendText
[ActionID:] <value>
Channel: <value>
Message: <value>
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel to send message to.
Message - Message to send.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Setvar
Setvar
Synopsis
Set a channel variable.
Description
Set a global or local channel variable.
Syntax
Action: Setvar
[ActionID:] <value>
[Channel:] <value>
Variable: <value>
Value: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Channel to set variable for.
Variable - Variable name.
Value - Variable value.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_ShowDialPlan
ShowDialPlan
Synopsis
Show dialplan contexts and extensions
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Show dialplan contexts and extensions. Be aware that showing the full dialplan may take a lot of
capacity.
Syntax
Action: ShowDialPlan
[ActionID:] <value>
[Extension:] <value>
[Context:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Extension - Show a specific extension.
Context - Show a specific context.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SIPnotify
SIPnotify
Synopsis
Send a SIP notify.
Description
Sends a SIP Notify event.
All parameters for this event must be specified in the body of this request via multiple Variable:
name=value sequences.
Syntax
Action: SIPnotify
[ActionID:] <value>
Channel: <value>
Variable: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Peer to receive the notify.
Variable - At least one variable pair must be specified. name = value
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SIPpeers
SIPpeers
Synopsis
List SIP peers (text format).
Description
Lists SIP peers in text format with details on current status. Peerlist will follow as separate
events, followed by a final event called PeerlistComplete.
Syntax
Action: SIPpeers
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SIPqualifypeer
SIPqualifypeer
Synopsis
Qualify SIP peers.
Description
Qualify a SIP peer.
Syntax
Action: SIPqualifypeer
[ActionID:] <value>
Peer: <value>
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
ActionID - ActionID for this transaction. Will be returned.
Peer - The peer name you want to qualify.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SIPshowpeer
SIPshowpeer
Synopsis
show SIP peer (text format).
Description
Show one SIP peer with details on current status.
Syntax
Action: SIPshowpeer
[ActionID:] <value>
Peer: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Peer - The peer name you want to check.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SIPshowregistry
SIPshowregistry
Synopsis
Show SIP registrations (text format).
Description
Lists all registration requests and status. Registrations will follow as separate events. followed by
a final event called RegistrationsComplete.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
Action: SIPshowregistry
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SKINNYdevices
SKINNYdevices
Synopsis
List SKINNY devices (text format).
Description
Lists Skinny devices in text format with details on current status. Devicelist will follow as separate
events, followed by a final event called DevicelistComplete.
Syntax
Action: SKINNYdevices
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SKINNYlines
SKINNYlines
Synopsis
List SKINNY lines (text format).
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Lists Skinny lines in text format with details on current status. Linelist will follow as separate
events, followed by a final event called LinelistComplete.
Syntax
Action: SKINNYlines
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SKINNYshowdevice
SKINNYshowdevice
Synopsis
Show SKINNY device (text format).
Description
Show one SKINNY device with details on current status.
Syntax
Action: SKINNYshowdevice
[ActionID:] <value>
Device: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Device - The device name you want to check.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_SKINNYshowline
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SKINNYshowline
Synopsis
Show SKINNY line (text format).
Description
Show one SKINNY line with details on current status.
Syntax
Action: SKINNYshowline
[ActionID:] <value>
Line: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Line - The line name you want to check.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_Status
Status
Synopsis
List channel status.
Description
Will return the status information of each channel along with the value for the specified channel
variables.
Syntax
Action: Status
[ActionID:] <value>
Channel: <value>
[Variables:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Channel - The name of the channel to query for status.
Variables - Comma , separated list of variable to include.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_StopMonitor
StopMonitor
Synopsis
Stop monitoring a channel.
Description
This action may be used to end a previously started 'Monitor' action.
Syntax
Action: StopMonitor
[ActionID:] <value>
Channel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - The name of the channel monitored.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_UnpauseMonitor
UnpauseMonitor
Synopsis
Unpause monitoring of a channel.
Description
This action may be used to re-enable recording of a channel after calling PauseMonitor.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Action: UnpauseMonitor
[ActionID:] <value>
Channel: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Channel - Used to specify the channel to record.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_UpdateConfig
UpdateConfig
Synopsis
Update basic configuration.
Description
This action will modify, create, or delete configuration elements in Asterisk configuration files.
Syntax
Action: UpdateConfig
[ActionID:] <value>
SrcFilename: <value>
DstFilename: <value>
[Reload:] <value>
[Action-XXXXXX:] <value>
[Cat-XXXXXX:] <value>
[Var-XXXXXX:] <value>
[Value-XXXXXX:] <value>
[Match-XXXXXX:] <value>
[Line-XXXXXX:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
SrcFilename - Configuration filename to read (e.g. foo.conf ).
DstFilename - Configuration filename to write (e.g. foo.conf )
Reload - Whether or not a reload should take place (or name of specific module).
Action-XXXXXX - Action to take. X's represent 6 digit number beginning with 000000.
NewCat
RenameCat
DelCat
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
EmptyCat
Update
Delete
Append
Insert
Cat-XXXXXX - Category to operate on. X's represent 6 digit number beginning with 000000.
Var-XXXXXX - Variable to work on. X's represent 6 digit number beginning with 000000.
Value-XXXXXX - Value to work on. X's represent 6 digit number beginning with 000000.
Match-XXXXXX - Extra match required to match line. X's represent 6 digit number beginning with 000000.
Line-XXXXXX - Line in category to operate on (used with delete and insert actions). X's represent 6 digit number beginning with 000000.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_UserEvent
UserEvent
Synopsis
Send an arbitrary event.
Description
Send an event to manager sessions.
Syntax
Action: UserEvent
[ActionID:] <value>
UserEvent: <value>
[Header1:] <value>
[HeaderN:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
UserEvent - Event string to send.
Header1 - Content1.
HeaderN - ContentN.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_VoicemailUsersList
VoicemailUsersList
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
List All Voicemail User Information.
Description
Syntax
Action: VoicemailUsersList
[ActionID:] <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
ManagerAction_WaitEvent
WaitEvent
Synopsis
Wait for an event to occur.
Description
This action will ellicit a Success response. Whenever a manager event is queued. Once
WaitEvent has been called on an HTTP manager session, events will be generated and queued.
Syntax
Action: WaitEvent
[ActionID:] <value>
Timeout: <value>
Arguments
ActionID - ActionID for this transaction. Will be returned.
Timeout - Maximum time (in seconds) to wait for events, -1 means forever.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Dialplan Applications
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_AddQueueMember
AddQueueMember()
Synopsis
Dynamically adds queue members.
Description
Dynamically adds interface to an existing queue. If the interface is already in the queue it will
return an error.
This application sets the following channel variable upon completion:
AQMSTATUS - The status of the attempt to add a queue member as a text string.
ADDED
MEMBERALREADY
NOSUCHQUEUE
Syntax
AddQueueMember(queuename[,interface[,penalty[,options[,membername[,stateinterfa
Arguments
queuename
interface
penalty
options
membername
stateinterface
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_ADSIProg
ADSIProg()
Synopsis
Load Asterisk ADSI Scripts into phone
Description
This application programs an ADSI Phone with the given script
Syntax
ADSIProg([script])
Arguments
script - adsi script to use. If not given uses the default script asterisk.adsi
See Also
Application_GetCPEID
adsi.conf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AELSub
AELSub()
Synopsis
Launch subroutine built with AEL
Description
Execute the named subroutine, defined in AEL, from another dialplan language, such as
extensions.conf, Realtime extensions, or Lua.
The purpose of this application is to provide a sane entry point into AEL subroutines, the
implementation of which may change from time to time.
Syntax
AELSub(routine[,args])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
routine - Named subroutine to execute.
args
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AgentLogin
AgentLogin()
Synopsis
Call agent login.
Description
Asks the agent to login to the system. Always returns -1. While logged in, the agent can receive
calls and will hear a beep when a new call comes in. The agent can dump the call by pressing
the star key.
Syntax
AgentLogin([AgentNo[,options]])
Arguments
AgentNo
options
s - silent login - do not announce the login ok segment after agent logged on/off
See Also
Application_Queue
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_AGENT
agents.conf
queues.conf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AgentMonitorOutgoing
AgentMonitorOutgoing()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Record agent's outgoing call.
Description
Tries to figure out the id of the agent who is placing outgoing call based on comparison of the
callerid of the current interface and the global variable placed by the AgentCallbackLogin
application. That's why it should be used only with the AgentCallbackLogin app. Uses the
monitoring functions in chan_agent instead of Monitor application. That has to be configured in
the agents.conf file.
Normally the app returns 0 unless the options are passed.
Syntax
AgentMonitorOutgoing([options])
Arguments
options
d - make the app return -1 if there is an error condition.
c - change the CDR so that the source of the call is Agent/agent_id
n - don't generate the warnings when there is no callerid or the agentid is not known. It's handy if you want to have one context
for agent and non-agent calls.
See Also
agents.conf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AGI
AGI()
Synopsis
Executes an AGI compliant application.
Description
Executes an Asterisk Gateway Interface compliant program on a channel. AGI allows Asterisk to
launch external programs written in any language to control a telephony channel, play audio,
read DTMF digits, etc. by communicating with the AGI protocol on stdin and stdout. As of
1.6.0, this channel will not stop dialplan execution on hangup inside of this application. Dialplan
execution will continue normally, even upon hangup until the AGI application signals a desire to
stop (either by exiting or, in the case of a net script, by closing the connection). A locally
executed AGI script will receive SIGHUP on hangup from the channel except when using
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
DeadAGI. A fast AGI server will correspondingly receive a HANGUP inline with the command
dialog. Both of theses signals may be disabled by setting the Executes an Asterisk Gateway
Interface compliant program on a channel. AGI allows Asterisk to launch external programs
written in any language to control a telephony channel, play audio, read DTMF digits, etc. by
communicating with the AGI protocol on None - AGISIGHUP channel variable to no before
executing the AGI application.
Use the CLI command agi show commands to list available agi commands.
This application sets the following channel variable upon completion:
AGISTATUS - The status of the attempt to the run the AGI script text string, one of:
SUCCESS
FAILURE
NOTFOUND
HANGUP
Syntax
AGI(command[,arg1[,arg2]])
Arguments
command
args
arg1
arg2
See Also
Application_EAGI
Application_DeadAGI
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AlarmReceiver
AlarmReceiver()
Synopsis
Provide support for receiving alarm reports from a burglar or fire alarm panel.
Description
This application should be called whenever there is an alarm panel calling in to dump its events.
The application will handshake with the alarm panel, and receive events, validate them,
handshake them, and store them until the panel hangs up. Once the panel hangs up, the
application will run the system command specified by the eventcmd setting in
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
alarmreceiver.conf and pipe the events to the standard input of the application. The
configuration file also contains settings for DTMF timing, and for the loudness of the
acknowledgement tones.
Only 1 signalling format is supported at this time: Ademco Contact ID.Only 1 signalling format is
supported at this time: Ademco Contact ID.
Syntax
AlarmReceiver()
Arguments
See Also
alarmreceiver.conf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_AMD
AMD()
Synopsis
Attempt to detect answering machines.
Description
This application attempts to detect answering machines at the beginning of outbound calls.
Simply call this application after the call has been answered (outbound only, of course).
When loaded, AMD reads amd.conf and uses the parameters specified as default values. Those
default values get overwritten when the calling AMD with parameters.
This application sets the following channel variables:
AMDSTATUS - This is the status of the answering machine detection
MACHINE
HUMAN
NOTSURE
HANGUP
AMDCAUSE - Indicates the cause that led to the conclusion
TOOLONG - Total Time.
INITIALSILENCE - Silence Duration - Initial Silence.
HUMAN - Silence Duration - afterGreetingSilence.
LONGGREETING - Voice Duration - Greeting.
MAXWORDLENGTH - Word Count - maximum number of words.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
AMD([initialSilence[,greeting[,afterGreetingSilence[,totalAnalysis
Time[,miniumWordLength[,betweenWordSilence[,maximumNumberOfWords[,silenceThresh
Arguments
initialSilence - Is maximum initial silence duration before greeting. If this is exceeded set as MACHINE
greeting - is the maximum length of a greeting. If this is exceeded set as MACHINE
afterGreetingSilence - Is the silence after detecting a greeting. If this is exceeded set as HUMAN
totalAnalysis Time - Is the maximum time allowed for the algorithm to decide HUMAN or MACHINE
miniumWordLength - Is the minimum duration of Voice considered to be a word
betweenWordSilence - Is the minimum duration of silence after a word to consider the audio that follows to be a new word
maximumNumberOfWords - Is the maximum number of words in a greeting If this is exceeded set as MACHINE
silenceThreshold - How long do we consider silence
maximumWordLength - Is the maximum duration of a word to accept. If exceeded set as MACHINE
See Also
Application_WaitForSilence
Application_WaitForNoise
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Answer
Answer()
Synopsis
Answer a channel if ringing.
Description
If the call has not been answered, this application will answer it. Otherwise, it has no effect on the
call.
Syntax
Answer([delay[,nocdr]])
Arguments
delay - Asterisk will wait this number of milliseconds before returning to the dialplan after answering the call.
nocdr - Asterisk will send an answer signal to the calling phone, but will not set the disposition or answer time in the CDR for this call.
See Also
Application_Hangup
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Authenticate
Authenticate()
Synopsis
Authenticate a user
Description
This application asks the caller to enter a given password in order to continue dialplan execution.
If the password begins with the / character, it is interpreted as a file which contains a list of valid
passwords, listed 1 password per line in the file.
When using a database key, the value associated with the key can be anything.
Users have three attempts to authenticate before the channel is hung up.
Syntax
Authenticate(password[,options[,maxdigits[,prompt]]])
Arguments
password - Password the user should know
options
a - Set the channels' account code to the password that is entered
d - Interpret the given path as database key, not a literal file
m - Interpret the given path as a file which contains a list of account codes and password hashes delimited with :, listed one per
line in the file. When one of the passwords is matched, the channel will have its account code set to the corresponding account
code in the file.
r - Remove the database key upon successful entry (valid with d only)
maxdigits - maximum acceptable number of digits. Stops reading after maxdigits have been entered (without requiring the user to
press the # key). Defaults to 0 - no limit - wait for the user press the # key.
prompt - Override the agent-pass prompt file.
See Also
Application_VMAuthenticate
Application_DISA
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_BackGround
BackGround()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Play an audio file while waiting for digits of an extension to go to.
Description
This application will play the given list of files (do not put extension) while waiting for an
extension to be dialed by the calling channel. To continue waiting for digits after this application
has finished playing files, the WaitExten application should be used.
If one of the requested sound files does not exist, call processing will be terminated.
This application sets the following channel variable upon completion:
BACKGROUNDSTATUS - The status of the background attempt as a text string.
SUCCESS
FAILED
Syntax
BackGround(filename1[&filename2[&...]][,options[,langoverride[,context]]])
Arguments
filenames
filename1
filename2
options
s - Causes the playback of the message to be skipped if the channel is not in the up state (i.e. it hasn't been answered yet). If
this happens, the application will return immediately.
n - Don't answer the channel before playing the files.
m - Only break if a digit hit matches a one digit extension in the destination context.
langoverride - Explicitly specifies which language to attempt to use for the requested sound files.
context - This is the dialplan context that this application will use when exiting to a dialed extension.
See Also
Application_ControlPlayback
Application_WaitExten
Application_BackgroundDetect
Function_TIMEOUT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_BackgroundDetect
BackgroundDetect()
Synopsis
Background a file with talk detect.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Plays back filename, waiting for interruption from a given digit (the digit must start the beginning
of a valid extension, or it will be ignored). During the playback of the file, audio is monitored in the
receive direction, and if a period of non-silence which is greater than min ms yet less than max
ms is followed by silence for at least sil ms, which occurs during the first analysistime ms, then
the audio playback is aborted and processing jumps to the talk extension, if available.
Syntax
BackgroundDetect(filename[,sil[,min[,max[,analysistime]]]])
Arguments
filename
sil - If not specified, defaults to 1000.
min - If not specified, defaults to 100.
max - If not specified, defaults to infinity.
analysistime - If not specified, defaults to infinity.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Bridge
Bridge()
Synopsis
Bridge two channels.
Description
Allows the ability to bridge two channels via the dialplan.
This application sets the following channel variable upon completion:
BRIDGERESULT - The result of the bridge attempt as a text string.
SUCCESS
FAILURE
LOOP
NONEXISTENT
INCOMPATIBLE
Syntax
Bridge(channel[,options])
Arguments
channel - The current channel is bridged to the specified channel.
options
p - Play a courtesy tone to channel.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
h - Allow the called party to hang up by sending the * DTMF digit.
H - Allow the calling party to hang up by pressing the * DTMF digit.
k - Allow the called party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
K - Allow the calling party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
L(x:y:z) - Limit the call to x ms. Play a warning when y ms are left. Repeat the warning every z ms. The following special
variables can be used with this option: Play sounds to the caller. yes|no (default yes) Play sounds to the callee. yes|no File to
play when time is up. File to play when call begins. File to play as warning if y is defined. The default is to say the time remaining.
S
- Hang up the call after x seconds after the called party has answered the call.
t - Allow the called party to transfer the calling party by sending the DTMF sequence defined in features.conf.
T - Allow the calling party to transfer the called party by sending the DTMF sequence defined in features.conf.
w - Allow the called party to enable recording of the call by sending the DTMF sequence defined for one-touch recording in
features.conf.
W - Allow the calling party to enable recording of the call by sending the DTMF sequence defined for one-touch recording in
features.conf.
x - Cause the called party to be hung up after the bridge, instead of being restarted in the dialplan.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r332176.
Application_Busy
Busy()
Synopsis
Indicate the Busy condition.
Description
This application will indicate the busy condition to the calling channel.
Syntax
Busy([timeout])
Arguments
timeout - If specified, the calling channel will be hung up after the specified number of seconds. Otherwise, this application will wait until
the calling channel hangs up.
See Also
Application_Congestion
Application_Progess
Application_PlayTones
Application_Hangup
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_CallCompletionCancel
CallCompletionCancel()
Synopsis
Cancel call completion service
Description
Cancel a Call Completion Request.
This application sets the following channel variables:
CC_CANCEL_RESULT - This is the returned status of the cancel.
SUCCESS
FAIL
CC_CANCEL_REASON - This is the reason the cancel failed.
NO_CORE_INSTANCE
NOT_GENERIC
UNSPECIFIED
Syntax
CallCompletionCancel()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_CallCompletionRequest
CallCompletionRequest()
Synopsis
Request call completion service for previous call
Description
Request call completion service for a previously failed call attempt.
This application sets the following channel variables:
CC_REQUEST_RESULT - This is the returned status of the request.
SUCCESS
FAIL
CC_REQUEST_REASON - This is the reason the request failed.
NO_CORE_INSTANCE
NOT_GENERIC
TOO_MANY_REQUESTS
UNSPECIFIED
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
UNSPECIFIED
Syntax
CallCompletionRequest()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_CELGenUserEvent
CELGenUserEvent()
Synopsis
Generates a CEL User Defined Event.
Description
A CEL event will be immediately generated by this channel, with the supplied name for a type.
Syntax
CELGenUserEvent(event-name[,extra])
Arguments
event-name
event-name
extra - Extra text to be included with the event.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ChangeMonitor
ChangeMonitor()
Synopsis
Change monitoring filename of a channel.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Changes monitoring filename of a channel. Has no effect if the channel is not monitored.
Syntax
ChangeMonitor(filename_base)
Arguments
filename_base - The new filename base to use for monitoring this channel.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ChanIsAvail
ChanIsAvail()
Synopsis
Check channel availability
Description
This application will check to see if any of the specified channels are available.
This application sets the following channel variables:
AVAILCHAN - The name of the available channel, if one exists
AVAILORIGCHAN - The canonical channel name that was used to create the channel
AVAILSTATUS - The device state for the device
AVAILCAUSECODE - The cause code returned when requesting the channel
Syntax
ChanIsAvail([Technology2/Resource2[&...]][,options])
Arguments
Technology/Resource - Specification of the device(s) to check. These must be in the format of Technology/Resource, where
Technology represents a particular channel driver, and Resource represents a resource available to that particular channel driver.
Technology2/Resource2 - Optional extra devices to check If you need more then one enter them as
Technology2/Resource2&Technology3/Resourse3&.....
options
a - Check for all available channels, not only the first one
s - Consider the channel unavailable if the channel is in use at all
t - Simply checks if specified channels exist in the channel list
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ChannelRedirect
ChannelRedirect()
Synopsis
Redirects given channel to a dialplan target
Description
Sends the specified channel to the specified extension priority
This application sets the following channel variables upon completion
CHANNELREDIRECT_STATUS NOCHANNEL
SUCCESS Are set to the result of the redirection
Syntax
ChannelRedirect(channel[,context[,extension,priority]])
Arguments
channel
context
extension
priority
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ChanSpy
ChanSpy()
Synopsis
Listen to a channel, and optionally whisper into it.
Description
This application is used to listen to the audio from an Asterisk channel. This includes the audio
coming in and out of the channel being spied on. If the chanprefix parameter is specified, only
channels beginning with this string will be spied upon.
While spying, the following actions may be performed:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Dialing # cycles the volume level.
Dialing * will stop spying and look for another channel to spy on.
Dialing a series of digits followed by # builds a channel name to append to 'chanprefix'. For example, executing ChanSpy(Agent) and
then dialing the digits '1234#' while spying will begin spying on the channel 'Agent/1234'. Note that this feature will be overridden if the 'd'
option is used
The The X option supersedes the three features above in that if a valid single digit extension
exists in the correct context ChanSpy will exit to it. This also disables choosing a channel based
on chanprefix and a digit sequence.
Syntax
ChanSpy([chanprefix[,options]])
Arguments
chanprefix
options
b - Only spy on channels involved in a bridged call.
B - Instead of whispering on a single channel barge in on both channels involved in the call.
c
digit - Specify a DTMF digit that can be used to spy on the next available channel.
d - Override the typical numeric DTMF functionality and instead use DTMF to switch between spy modes.
4 - spy mode
5 - whisper mode
6 - barge mode
e - Enable enforced mode, so the spying channel can only monitor extensions whose name is in the ext : delimited list.
ext
E - Exit when the spied-on channel hangs up.
g - both both grp and SPYGROUP can contain either a single group or a colon-delimited list of groups, such as
sales:support:accounting.
grp - Only spy on channels in which one or more of the groups listed in grp matches one or more groups from the
SPYGROUP variable set on the channel to be spied upon.
n - Say the name of the person being spied on if that person has recorded his/her name. If a context is specified, then that
voicemail context will be searched when retrieving the name, otherwise the default context be used when searching for the
name (i.e. if SIP/1000 is the channel being spied on and no mailbox is specified, then 1000 will be used when searching for the
name).
mailbox
context
o - Only listen to audio coming from this channel.
q - Don't play a beep when beginning to spy on a channel, or speak the selected channel name.
r - Record the session to the monitor spool directory. An optional base for the filename may be specified. The default is
chanspy.
basename
s - Skip the playback of the channel type (i.e. SIP, IAX, etc) when speaking the selected channel name.
S - Stop when no more channels are left to spy on.
v - Adjust the initial volume in the range from -4 to 4. A negative value refers to a quieter setting.
value
w - Enable whisper mode, so the spying channel can talk to the spied-on channel.
W - Enable private whisper mode, so the spying channel can talk to the spied-on channel but cannot listen to that channel.
x
digit - Specify a DTMF digit that can be used to exit the application.
X - Allow the user to exit ChanSpy to a valid single digit numeric extension in the current context or the context specified by the
SPY_EXIT_CONTEXT channel variable. The name of the last channel that was spied on will be stored in the SPY_CHANNEL
variable.
4 - spy mode
5 - whisper mode
6 - barge mode
See Also
Application_ExtenSpy
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ClearHash
ClearHash()
Synopsis
Clear the keys from a specified hashname.
Description
Clears all keys out of the specified hashname.
Syntax
ClearHash(hashname)
Arguments
hashname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ConfBridge
ConfBridge()
Synopsis
Conference bridge application.
Description
Enters the user into a specified conference bridge. The user can exit the conference by hangup
only.
The join sound can be set using the CONFBRIDGE_JOIN_SOUND variable and the leave sound
can be set using the CONFBRIDGE_LEAVE_SOUND variable. These can be unique to the caller.
This application will not automatically answer the channel.This application will not automatically
answer the channel.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ConfBridge([confno[,options]])
Arguments
confno - The conference number
options
a - Set admin mode.
A - Set marked mode.
c - Announce user(s) count on joining a conference.
m - Set initially muted.
M - Enable music on hold when the conference has a single caller. Optionally, specify a musiconhold class to use. If one is not
provided, it will use the channel's currently set music class, or default.
class
1 - Do not play message when first person enters
s - Present menu (user or admin) when * is received (send to menu).
w - Wait until the marked user enters the conference.
q - Quiet mode (don't play enter/leave sounds).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Congestion
Congestion()
Synopsis
Indicate the Congestion condition.
Description
This application will indicate the congestion condition to the calling channel.
Syntax
Congestion([timeout])
Arguments
timeout - If specified, the calling channel will be hung up after the specified number of seconds. Otherwise, this application will wait until
the calling channel hangs up.
See Also
Application_Busy
Application_Progess
Application_PlayTones
Application_Hangup
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ContinueWhile
ContinueWhile()
Synopsis
Restart a While loop.
Description
Returns to the top of the while loop and re-evaluates the conditional.
Syntax
ContinueWhile()
Arguments
See Also
Application_While
Application_EndWhile
Application_ExitWhile
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ControlPlayback
ControlPlayback()
Synopsis
Play a file with fast forward and rewind.
Description
This application will play back the given filename.
It sets the following channel variables upon completion:
CPLAYBACKSTATUS - Contains the status of the attempt as a text string
SUCCESS
USERSTOPPED
ERROR
CPLAYBACKOFFSET - Contains the offset in ms into the file where playback was at when it stopped. -1 is end of file.
CPLAYBACKSTOPKEY - If the playback is stopped by the user this variable contains the key that was pressed.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ControlPlayback(filename[,skipms[,ff[,rew[,stop[,pause[,restart[,options]]]]]]]
Arguments
filename
skipms - This is number of milliseconds to skip when rewinding or fast-forwarding.
ff - Fast-forward when this DTMF digit is received. (defaults to # )
rew - Rewind when this DTMF digit is received. (defaults to * )
stop - Stop playback when this DTMF digit is received.
pause - Pause playback when this DTMF digit is received.
restart - Restart playback when this DTMF digit is received.
options
o
time - Start at time ms from the beginning of the file.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DAHDIAcceptR2Call
DAHDIAcceptR2Call()
Synopsis
Accept an R2 call if its not already accepted (you still need to answer it)
Description
This application will Accept the R2 call either with charge or no charge.
Syntax
DAHDIAcceptR2Call(charge)
Arguments
charge - Yes or No. Whether you want to accept the call with charge or without charge.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DAHDIBarge
DAHDIBarge()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Barge in (monitor) DAHDI channel.
Description
Barges in on a specified DAHDI channel or prompts if one is not specified. Returns -1 when
caller user hangs up and is independent of the state of the channel being monitored.
Syntax
DAHDIBarge([channel])
Arguments
channel - Channel to barge.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DAHDIRAS
DAHDIRAS()
Synopsis
Executes DAHDI ISDN RAS application.
Description
Executes a RAS server using pppd on the given channel. The channel must be a clear channel
(i.e. PRI source) and a DAHDI channel to be able to use this function (No modem emulation is
included).
Your pppd must be patched to be DAHDI aware.
Syntax
DAHDIRAS(args)
Arguments
args - A list of parameters to pass to the pppd daemon, separated by , characters.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_DAHDIScan
DAHDIScan()
Synopsis
Scan DAHDI channels to monitor calls.
Description
Allows a call center manager to monitor DAHDI channels in a convenient way. Use # to select
the next channel and use * to exit.
Syntax
DAHDIScan([group])
Arguments
group - Limit scanning to a channel group by setting this option.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DAHDISendCallreroutingFacility
DAHDISendCallreroutingFacility()
Synopsis
Send an ISDN call rerouting/deflection facility message.
Description
This application will send an ISDN switch specific call rerouting/deflection facility message over
the current channel. Supported switches depend upon the version of libpri in use.
Syntax
DAHDISendCallreroutingFacility(destination[,original[,reason]])
Arguments
destination - Destination number.
original - Original called number.
reason - Diversion reason, if not specified defaults to unknown
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DAHDISendKeypadFacility
DAHDISendKeypadFacility()
Synopsis
Send digits out of band over a PRI.
Description
This application will send the given string of digits in a Keypad Facility IE over the current
channel.
Syntax
DAHDISendKeypadFacility(digits)
Arguments
digits
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DateTime
DateTime()
Synopsis
Says a specified time in a custom format.
Description
Say the date and time in a specified format.
Syntax
DateTime([unixtime[,timezone[,format]]])
Arguments
unixtime - time, in seconds since Jan 1, 1970. May be negative. Defaults to now.
timezone - timezone, see /usr/share/zoneinfo for a list. Defaults to machine default.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
format - a format the time is to be said in. See voicemail.conf. Defaults to ABdY "digits/at" IMp
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DBdel
DBdel()
Synopsis
Delete a key from the asterisk database.
Description
This application will delete a key from the Asterisk database.
This application has been DEPRECATED in favor of the DB_DELETE function.This application
has been DEPRECATED in favor of the DB_DELETE function.
Syntax
DBdel(family,key)
Arguments
family
key
See Also
Function_DB_DELETE
Application_DBdeltree
Function_DB
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DBdeltree
DBdeltree()
Synopsis
Delete a family or keytree from the asterisk database.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This application will delete a family or keytree from the Asterisk database.
Syntax
DBdeltree(family[,keytree])
Arguments
family
keytree
See Also
Function_DB_DELETE
Application_DBdel
Function_DB
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DeadAGI
DeadAGI()
Synopsis
Executes AGI on a hungup channel.
Description
Executes an Asterisk Gateway Interface compliant program on a channel. AGI allows Asterisk to
launch external programs written in any language to control a telephony channel, play audio,
read DTMF digits, etc. by communicating with the AGI protocol on stdin and stdout. As of
1.6.0, this channel will not stop dialplan execution on hangup inside of this application. Dialplan
execution will continue normally, even upon hangup until the AGI application signals a desire to
stop (either by exiting or, in the case of a net script, by closing the connection). A locally
executed AGI script will receive SIGHUP on hangup from the channel except when using
DeadAGI. A fast AGI server will correspondingly receive a HANGUP inline with the command
dialog. Both of theses signals may be disabled by setting the Executes an Asterisk Gateway
Interface compliant program on a channel. AGI allows Asterisk to launch external programs
written in any language to control a telephony channel, play audio, read DTMF digits, etc. by
communicating with the AGI protocol on None - AGISIGHUP channel variable to no before
executing the AGI application.
Use the CLI command agi show commands to list available agi commands.
This application sets the following channel variable upon completion:
AGISTATUS - The status of the attempt to the run the AGI script text string, one of:
SUCCESS
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
FAILURE
NOTFOUND
HANGUP
Syntax
DeadAGI(command[,arg1[,arg2]])
Arguments
command
args
arg1
arg2
See Also
Application_AGI
Application_EAGI
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Dial
Dial()
Synopsis
Attempt to connect to another device or endpoint and bridge the call.
Description
This application will place calls to one or more specified channels. As soon as one of the
requested channels answers, the originating channel will be answered, if it has not already been
answered. These two channels will then be active in a bridged call. All other channels that were
requested will then be hung up.
Unless there is a timeout specified, the Dial application will wait indefinitely until one of the called
channels answers, the user hangs up, or if all of the called channels are busy or unavailable.
Dialplan executing will continue if no requested channels can be called, or if the timeout expires.
This application will report normal termination if the originating channel hangs up, or if the call is
bridged and either of the parties in the bridge ends the call.
If the If the None - OUTBOUND_GROUP variable is set, all peer channels created by this
application will be put into that group (as in Set(GROUP()=...). If the If the None OUTBOUND_GROUP_ONCE variable is set, all peer channels created by this application will be put
into that group (as in Set(GROUP()=...). Unlike OUTBOUND_GROUP, however, the variable will
be unset after use.
This application sets the following channel variables:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
DIALEDTIME - This is the time from dialing a channel until when it is disconnected.
ANSWEREDTIME - This is the amount of time for actual call.
DIALSTATUS - This is the status of the call
CHANUNAVAIL
CONGESTION
NOANSWER
BUSY
ANSWER
CANCEL
DONTCALL - For the Privacy and Screening Modes. Will be set if the called party chooses to send the calling party to the 'Go
Away' script.
TORTURE - For the Privacy and Screening Modes. Will be set if the called party chooses to send the calling party to the 'torture'
script.
INVALIDARGS
Syntax
Dial(Technology/Resource[&Technology2/Resource2[&...]][,timeout[,options[,URL]]
Arguments
Technology/Resource
Technology/Resource - Specification of the device(s) to dial. These must be in the format of Technology/Resource,
where Technology represents a particular channel driver, and Resource represents a resource available to that particular
channel driver.
Technology2/Resource2 - Optional extra devices to dial in parallel If you need more then one enter them as
Technology2/Resource2&Technology3/Resourse3&.....
timeout - Specifies the number of seconds we attempt to dial the specified devices If not specified, this defaults to 136 years.
options
A - Play an announcement to the called party, where x is the prompt to be played
x - The file to play to the called party
a - Immediately answer the calling channel when the called channel answers in all cases. Normally, the calling channel is
answered when the called channel answers, but when options such as A() and M() are used, the calling channel is not answered
until all actions on the called channel (such as playing an announcement) are completed. This option can be used to answer the
calling channel before doing anything on the called channel. You will rarely need to use this option, the default behavior is
adequate in most cases.
C - Reset the call detail record (CDR) for this call.
c - If the Dial() application cancels this call, always set the flag to tell the channel driver that the call is answered elsewhere.
d - Allow the calling user to dial a 1 digit extension while waiting for a call to be answered. Exit to that extension if it exists in the
current context, or the context defined in the EXITCONTEXT variable, if it exists. Many SIP and ISDN phones cannot send DTMF
digits until the call is connected. If you wish to use this option with these phones, you can use the Many SIP and ISDN phones
cannot send DTMF digits until the call is connected. If you wish to use this option with these phones, you can use the Answer
application before dialing.
D - Send the specified DTMF strings after the called party has answered, but before the call gets bridged. The called DTMF
string is sent to the called party, and the calling DTMF string is sent to the calling party. Both arguments can be used alone. If
progress is specified, its DTMF is sent immediately after receiving a PROGRESS message.
called
calling
progress
e - Execute the h extension for peer after the call ends
f - If x is not provided, force the CallerID sent on a call-forward or deflection to the dialplan extension of this Dial() using a
dialplan hint. For example, some PSTNs do not allow CallerID to be set to anything other than the numbers assigned to you. If
x is provided, force the CallerID sent to x.
x
F - When the caller hangs up, transfer the called party to the specified destination and start execution at that location. Any
channel variables you want the called channel to inherit from the caller channel must be prefixed with one or two underbars ('
').Any channel variables you want the called channel to inherit from the caller channel must be prefixed with one or two
underbars ('').
context
exten
priority
F - When the caller hangs up, transfer the called party to the next priority of the current extension and start execution at that
location. Any channel variables you want the called channel to inherit from the caller channel must be prefixed with one or two
underbars ('').Any channel variables you want the called channel to inherit from the caller channel must be prefixed with one or
two underbars (''). Additionally, using this option from a Macro() or GoSub() might not make sense as there would be no return
pointsAdditionally, using this option from a Macro() or GoSub() might not make sense as there would be no return points
g - Proceed with dialplan execution at the next priority in the current extension if the destination channel hangs up.
G - If the call is answered, transfer the calling party to the specified priority and the called party to the specified priority plus one.
You cannot use any additional action post answer options in conjunction with this option.You cannot use any additional action
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
post answer options in conjunction with this option.
context
exten
priority
h - Allow the called party to hang up by sending the DTMF sequence defined for disconnect in features.conf.
H - Allow the calling party to hang up by sending the DTMF sequence defined for disconnect in features.conf. Many SIP and
ISDN phones cannot send DTMF digits until the call is connected. If you wish to allow DTMF disconnect before the dialed party
answers with these phones, you can use the Many SIP and ISDN phones cannot send DTMF digits until the call is connected. If
you wish to allow DTMF disconnect before the dialed party answers with these phones, you can use the Answer application
before dialing.
i - Asterisk will ignore any forwarding requests it may receive on this dial attempt.
I - Asterisk will ignore any connected line update requests or redirecting party update requests it may receiveon this dial attempt.
k - Allow the called party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
K - Allow the calling party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
L - Limit the call to x milliseconds. Play a warning when y milliseconds are left. Repeat the warning every z milliseconds until time
expires. This option is affected by the following variables: If set, this variable causes Asterisk to play the prompts to the caller. If
set, this variable causes Asterisk to play the prompts to the callee. If specified, filename specifies the sound prompt to play when
the timeout is reached. If not set, the time remaining will be announced. If specified, filename specifies the sound prompt to play
when the call begins. If not set, the time remaining will be announced. If specified, filename specifies the sound prompt to play as
a warning when time x is reached. If not set, the time remaining will be announced.
x - Maximum call time, in milliseconds
y - Warning time, in milliseconds
z - Repeat time, in milliseconds
m - Provide hold music to the calling party until a requested channel answers. A specific music on hold class (as defined in
musiconhold.conf ) can be specified.
class
M - Execute the specified macro for the called channel before connecting to the calling channel. Arguments can be specified to
the Macro using ^ as a delimiter. The macro can set the variable MACRO_RESULT to specify the following actions after the macro
is finished executing: If set, this action will be taken after the macro finished executing. You cannot use any additional action post
answer options in conjunction with this option. Also, pbx services are not run on the peer (called) channel, so you will not be able
to set timeouts via the TIMEOUT() function in this macro.You cannot use any additional action post answer options in
conjunction with this option. Also, pbx services are not run on the peer (called) channel, so you will not be able to set timeouts
via the TIMEOUT() function in this macro. Be aware of the limitations that macros have, specifically with regards to use of the
WaitExten application. For more information, see the documentation for Macro()
macro - Name of the macro that should be executed.
arg - Macro arguments
n - This option is a modifier for the call screening/privacy mode. (See the p and P options.) It specifies that no introductions are
to be saved in the priv-callerintros directory.
delete - With delete either not specified or set to 0, the recorded introduction will not be deleted if the caller hangs up
while the remote party has not yet answered. With delete set to 1, the introduction will always be deleted.
N - This option is a modifier for the call screening/privacy mode. It specifies that if Caller*ID is present, do not screen the call.
o - If x is not provided, specify that the CallerID that was present on the calling channel be stored as the CallerID on the called
channel. This was the behavior of Asterisk 1.0 and earlier. If x is provided, specify the CallerID stored on the called channel.
Note that o(${CALLERID(all)}) is similar to option o without the parameter.
x
O - Enables operator services mode. This option only works when bridging a DAHDI channel to another DAHDI channel only. if
specified on non-DAHDI interfaces, it will be ignored. When the destination answers (presumably an operator services station),
the originator no longer has control of their line. They may hang up, but the switch will not release their line until the destination
party (the operator) hangs up.
mode - With mode either not specified or set to 1, the originator hanging up will cause the phone to ring back
immediately. With mode set to 2, when the operator flashes the trunk, it will ring their phone back.
p - This option enables screening mode. This is basically Privacy mode without memory.
P - Enable privacy mode. Use x as the family/key in the AstDB database if it is provided. The current extension is used if a
database family/key is not specified.
x
r - Default: Indicate ringing to the calling party, even if the called party isn't actually ringing. Pass no audio to the calling party
until the called channel has answered.
tone - Indicate progress to calling party. Send audio 'tone' from indications.conf
S - Hang up the call x seconds after the called party has answered the call.
x
s - Force the outgoing callerid tag parameter to be set to the string x. Works with the f option.
x
t - Allow the called party to transfer the calling party by sending the DTMF sequence defined in features.conf. This setting
does not perform policy enforcement on transfers initiated by other methods.
T - Allow the calling party to transfer the called party by sending the DTMF sequence defined in features.conf. This setting
does not perform policy enforcement on transfers initiated by other methods.
U - Execute via Gosub the routine x for the called channel before connecting to the calling channel. Arguments can be specified
to the Gosub using ^ as a delimiter. The Gosub routine can set the variable GOSUB_RESULT to specify the following actions after
the Gosub returns. You cannot use any additional action post answer options in conjunction with this option. Also, pbx services
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
are not run on the peer (called) channel, so you will not be able to set timeouts via the TIMEOUT() function in this routine.You
cannot use any additional action post answer options in conjunction with this option. Also, pbx services are not run on the peer
(called) channel, so you will not be able to set timeouts via the TIMEOUT() function in this routine.
x - Name of the subroutine to execute via Gosub
arg - Arguments for the Gosub routine
u - Works with the f option.
x - Force the outgoing callerid presentation indicator parameter to be set to one of the values passed in x :
allowed_not_screened
allowed_passed_screen
allowed_failed_screen
allowed
prohib_not_screened
prohib_passed_screen
prohib_failed_screen
prohib
unavailable
w - Allow the called party to enable recording of the call by sending the DTMF sequence defined for one-touch recording in
features.conf.
W - Allow the calling party to enable recording of the call by sending the DTMF sequence defined for one-touch recording in
features.conf.
x - Allow the called party to enable recording of the call by sending the DTMF sequence defined for one-touch automixmonitor in
features.conf.
X - Allow the calling party to enable recording of the call by sending the DTMF sequence defined for one-touch automixmonitor in
features.conf.
z - On a call forward, cancel any dial timeout which has been set for this call.
URL - The optional URL will be sent to the called party if the channel driver supports it.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r339244.
Application_Dictate
Dictate()
Synopsis
Virtual Dictation Machine.
Description
Start dictation machine using optional base_dir for files.
Syntax
Dictate([base_dir[,filename]])
Arguments
base_dir
filename
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_Directory
Directory()
Synopsis
Provide directory of voicemail extensions.
Description
This application will present the calling channel with a directory of extensions from which they
can search by name. The list of names and corresponding extensions is retrieved from the
voicemail configuration file, voicemail.conf.
This application will immediately exit if one of the following DTMF digits are received and the
extension to jump to exists:
0 - Jump to the 'o' extension, if it exists. * - Jump to the 'a' extension, if it exists.
Syntax
Directory([vm-context[,dial-context[,options]]])
Arguments
vm-context - This is the context within voicemail.conf to use for the Directory. If not specified and searchcontexts=no in
voicemail.conf, then default will be assumed.
dial-context - This is the dialplan context to use when looking for an extension that the user has selected, or when jumping to the o
or a extension. If not specified, the current context will be used.
options - Only one of the Only one of the f, l, or b options may be specified. If more than one is specified, then Directory will act as if
b was specified. The number of characters for the user to type defaults to 3.
e - In addition to the name, also read the extension number to the caller before presenting dialing options.
f - Allow the caller to enter the first name of a user in the directory instead of using the last name. If specified, the optional
number argument will be used for the number of characters the user should enter.
n
l - Allow the caller to enter the last name of a user in the directory. This is the default. If specified, the optional number argument
will be used for the number of characters the user should enter.
n
b - Allow the caller to enter either the first or the last name of a user in the directory. If specified, the optional number argument
will be used for the number of characters the user should enter.
n
m - Instead of reading each name sequentially and asking for confirmation, create a menu of up to 8 names.
n - Read digits even if the channel is not answered.
p - Pause for n milliseconds after the digits are typed. This is helpful for people with cellphones, who are not holding the receiver
to their ear while entering DTMF.
n
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r327950.
Application_DISA
DISA()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Direct Inward System Access.
Description
The DISA, Direct Inward System Access, application allows someone from outside the telephone
switch (PBX) to obtain an internal system dialtone and to place calls from it as if they were
placing a call from within the switch. DISA plays a dialtone. The user enters their numeric
passcode, followed by the pound sign #. If the passcode is correct, the user is then given system
dialtone within context on which a call may be placed. If the user enters an invalid extension and
extension i exists in the specified context, it will be used.
Be aware that using this may compromise the security of your PBX.
The arguments to this application (in extensions.conf ) allow either specification of a single
global passcode (that everyone uses), or individual passcodes contained in a file ( filename ).
The file that contains the passcodes (if used) allows a complete specification of all of the same
arguments available on the command line, with the sole exception of the options. The file may
contain blank lines, or comments starting with # or ;.
Syntax
DISA(passcode|filename[,context[,cid[,mailbox[@context][,options]]]])
Arguments
passcode|filename - If you need to present a DISA dialtone without entering a password, simply set passcode to no-password You
may specified a filename instead of a passcode, this filename must contain individual passcodes
context - Specifies the dialplan context in which the user-entered extension will be matched. If no context is specified, the DISA
application defaults to the disa context. Presumably a normal system will have a special context set up for DISA use with some or a lot
of restrictions.
cid - Specifies a new (different) callerid to be used for this call.
mailbox - Will cause a stutter-dialtone (indication dialrecall ) to be used, if the specified mailbox contains any new messages.
mailbox
context
options
n - The DISA application will not answer initially.
p - The extension entered will be considered complete when a # is entered.
See Also
Application_Authenticate
Application_VMAuthenticate
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_DumpChan
DumpChan()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Dump Info About The Calling Channel.
Description
Displays information on channel and listing of all channel variables. If level is specified, output is
only displayed when the verbose level is currently set to that number or greater.
Syntax
DumpChan([level])
Arguments
level - Minimun verbose level
See Also
Application_NoOp
Application_Verbose
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_EAGI
EAGI()
Synopsis
Executes an EAGI compliant application.
Description
Using 'EAGI' provides enhanced AGI, with incoming audio available out of band on file descriptor
3.
Executes an Asterisk Gateway Interface compliant program on a channel. AGI allows Asterisk to
launch external programs written in any language to control a telephony channel, play audio,
read DTMF digits, etc. by communicating with the AGI protocol on stdin and stdout. As of
1.6.0, this channel will not stop dialplan execution on hangup inside of this application. Dialplan
execution will continue normally, even upon hangup until the AGI application signals a desire to
stop (either by exiting or, in the case of a net script, by closing the connection). A locally
executed AGI script will receive SIGHUP on hangup from the channel except when using
DeadAGI. A fast AGI server will correspondingly receive a HANGUP inline with the command
dialog. Both of theses signals may be disabled by setting the Executes an Asterisk Gateway
Interface compliant program on a channel. AGI allows Asterisk to launch external programs
written in any language to control a telephony channel, play audio, read DTMF digits, etc. by
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
communicating with the AGI protocol on None - AGISIGHUP channel variable to no before
executing the AGI application.
Use the CLI command agi show commands to list available agi commands.
This application sets the following channel variable upon completion:
AGISTATUS - The status of the attempt to the run the AGI script text string, one of:
SUCCESS
FAILURE
NOTFOUND
HANGUP
Syntax
EAGI(command[,arg1[,arg2]])
Arguments
command
args
arg1
arg2
See Also
Application_AGI
Application_DeadAGI
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Echo
Echo()
Synopsis
Echo audio, video, DTMF back to the calling party
Description
Echos back any audio, video or DTMF frames read from the calling channel back to itself. Note:
If '#' detected application exits
This application does not automatically answer and should be preceeded by an application such
as Answer() or Progress().
Syntax
Echo()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_EndWhile
EndWhile()
Synopsis
End a while loop.
Description
Return to the previous called While().
Syntax
EndWhile()
Arguments
See Also
Application_While
Application_ExitWhile
Application_ContinueWhile
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Exec
Exec()
Synopsis
Executes dialplan application.
Description
Allows an arbitrary application to be invoked even when not hard coded into the dialplan. If the
underlying application terminates the dialplan, or if the application cannot be found, Exec will
terminate the dialplan.
To invoke external applications, see the application System. If you would like to catch any error
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
instead, see TryExec.
Syntax
Exec(arguments)
Arguments
appname - Application name and arguments of the dialplan application to execute.
arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ExecIf
ExecIf()
Synopsis
Executes dialplan application, conditionally.
Description
If expr is true, execute and return the result of appiftrue(args).
If expr is true, but appiftrue is not found, then the application will return a non-zero value.
Syntax
ExecIf(expression?appiftrue[:...][:appiffalse[:...]])
Arguments
expression
execapp
appiftrue
appiffalse
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ExecIfTime
ExecIfTime()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Conditional application execution based on the current time.
Description
This application will execute the specified dialplan application, with optional arguments, if the
current time matches the given time specification.
Syntax
ExecIfTime(timesweekdaysmdaysmonths[,timezone]?appargs)
Arguments
day_condition
times
weekdays
mdays
months
timezone
appname
appargs
See Also
Application_Exec
Application_TryExec
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ExitWhile
ExitWhile()
Synopsis
End a While loop.
Description
Exits a While() loop, whether or not the conditional has been satisfied.
Syntax
ExitWhile()
Arguments
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_While
Application_EndWhile
Application_ContinueWhile
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ExtenSpy
ExtenSpy()
Synopsis
Listen to a channel, and optionally whisper into it.
Description
This application is used to listen to the audio from an Asterisk channel. This includes the audio
coming in and out of the channel being spied on. Only channels created by outgoing calls for the
specified extension will be selected for spying. If the optional context is not supplied, the current
channel's context will be used.
While spying, the following actions may be performed:
Dialing # cycles the volume level.
Dialing * will stop spying and look for another channel to spy on.
The The X option supersedes the three features above in that if a valid single digit extension
exists in the correct context ChanSpy will exit to it. This also disables choosing a channel based
on chanprefix and a digit sequence.
Syntax
ExtenSpy(exten[@context][,options])
Arguments
exten
exten - Specify extension.
context - Optionally specify a context, defaults to default.
options
b - Only spy on channels involved in a bridged call.
B - Instead of whispering on a single channel barge in on both channels involved in the call.
c
digit - Specify a DTMF digit that can be used to spy on the next available channel.
d - Override the typical numeric DTMF functionality and instead use DTMF to switch between spy modes.
4 - spy mode
5 - whisper mode
6 - barge mode
e - Enable enforced mode, so the spying channel can only monitor extensions whose name is in the ext : delimited list.
ext
E - Exit when the spied-on channel hangs up.
g - both both grp and SPYGROUP can contain either a single group or a colon-delimited list of groups, such as
sales:support:accounting.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
grp - Only spy on channels in which one or more of the groups listed in grp matches one or more groups from the
SPYGROUP variable set on the channel to be spied upon.
n - Say the name of the person being spied on if that person has recorded his/her name. If a context is specified, then that
voicemail context will be searched when retrieving the name, otherwise the default context be used when searching for the
name (i.e. if SIP/1000 is the channel being spied on and no mailbox is specified, then 1000 will be used when searching for the
name).
mailbox
context
o - Only listen to audio coming from this channel.
q - Don't play a beep when beginning to spy on a channel, or speak the selected channel name.
r - Record the session to the monitor spool directory. An optional base for the filename may be specified. The default is
chanspy.
basename
s - Skip the playback of the channel type (i.e. SIP, IAX, etc) when speaking the selected channel name.
S - Stop when there are no more extensions left to spy on.
v - Adjust the initial volume in the range from -4 to 4. A negative value refers to a quieter setting.
value
w - Enable whisper mode, so the spying channel can talk to the spied-on channel.
W - Enable private whisper mode, so the spying channel can talk to the spied-on channel but cannot listen to that channel.
x
digit - Specify a DTMF digit that can be used to exit the application.
X - Allow the user to exit ChanSpy to a valid single digit numeric extension in the current context or the context specified by the
SPY_EXIT_CONTEXT channel variable. The name of the last channel that was spied on will be stored in the SPY_CHANNEL
variable.
4 - spy mode
5 - whisper mode
6 - barge mode
See Also
Application_ChanSpy
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ExternalIVR
ExternalIVR()
Synopsis
Interfaces with an external IVR application.
Description
Either forks a process to run given command or makes a socket to connect to given host and
starts a generator on the channel. The generator's play list is controlled by the external
application, which can add and clear entries via simple commands issued over its stdout. The
external application will receive all DTMF events received on the channel, and notification if the
channel is hung up. The received on the channel, and notification if the channel is hung up. The
application will not be forcibly terminated when the channel is hung up. For more information see
doc/AST.pdf.
Syntax
ExternalIVR([arg1][,arg2][,options])
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
command|ivr://host
arg1
arg2
options
n - Tells ExternalIVR() not to answer the channel.
i - Tells ExternalIVR() not to send a hangup and exit when the channel receives a hangup, instead it sends an I informative
message meaning that the external application MUST hang up the call with an H command.
d - Tells ExternalIVR() to run on a channel that has been hung up and will not look for hangups. The external application must
exit with an E command.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Festival
Festival()
Synopsis
Say text to the user.
Description
Connect to Festival, send the argument, get back the waveform, play it to the user, allowing any
given interrupt keys to immediately terminate and return the value, or any to allow any number
back (useful in dialplan).
Syntax
Festival(text[,intkeys])
Arguments
text
intkeys
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Flash
Flash()
Synopsis
Flashes a DAHDI Trunk.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Performs a flash on a DAHDI trunk. This can be used to access features provided on an
incoming analogue circuit such as conference and call waiting. Use with SendDTMF() to perform
external transfers.
Syntax
Flash()
Arguments
See Also
Application_SendDTMF
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_FollowMe
FollowMe()
Synopsis
Find-Me/Follow-Me application.
Description
This application performs Find-Me/Follow-Me functionality for the caller as defined in the profile
matching the followmeid parameter in followme.conf. If the specified followmeid profile
doesn't exist in followme.conf, execution will be returned to the dialplan and call execution
will continue at the next priority.
Returns -1 on hangup.
Syntax
FollowMe(followmeid[,options])
Arguments
followmeid
options
s - Playback the incoming status message prior to starting the follow-me step(s)
a - Record the caller's name so it can be announced to the callee on each step.
n - Playback the unreachable status message if we've run out of steps to reach the or the callee has elected not to be reachable.
d - Disable the 'Please hold while we try to connect your call' announcement.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ForkCDR
ForkCDR()
Synopsis
Forks the Call Data Record.
Description
Causes the Call Data Record to fork an additional cdr record starting from the time of the fork
call. This new cdr record will be linked to end of the list of cdr records attached to the channel.
The original CDR has a LOCKED flag set, which forces most cdr operations to skip it, except for
the functions that set the answer and end times, which ignore the LOCKED flag. This allows all
the cdr records in the channel to be 'ended' together when the channel is closed.
The CDR() func (when setting CDR values) normally ignores the LOCKED flag also, but has
options to vary its behavior. The 'T' option (described below), can override this behavior, but
beware the risks.
First, this app finds the last cdr record in the list, and makes a copy of it. This new copy will be
the newly forked cdr record. Next, this new record is linked to the end of the cdr record list. Next,
The new cdr record is RESET (unless you use an option to prevent this)
This means that:
1. All flags are unset on the cdr record
2. the start, end, and answer times are all set to zero.
3. the billsec and duration fields are set to zero.
4. the start time is set to the current time.
5. the disposition is set to NULL.
Next, unless you specified the v option, all variables will be removed from the original cdr record.
Thus, the v option allows any CDR variables to be replicated to all new forked cdr records.
Without the v option, the variables on the original are effectively moved to the new forked cdr
record.
Next, if the s option is set, the provided variable and value are set on the original cdr record.
Next, if the a option is given, and the original cdr record has an answer time set, then the new
forked cdr record will have its answer time set to its start time. If the old answer time were carried
forward, the answer time would be earlier than the start time, giving strange duration and billsec
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
times.
If the d option was specified, the disposition is copied from the original cdr record to the new
forked cdr. If the D option was specified, the destination channel field in the new forked CDR is
erased. If the e option was specified, the 'end' time for the original cdr record is set to the current
time. Future hang-up or ending events will not override this time stamp. If the A option is
specified, the original cdr record will have it ANS_LOCKED flag set, which prevent future answer
events from updating the original cdr record's disposition. Normally, an ANSWERED event would
mark all cdr records in the chain as ANSWERED. If the T option is specified, the original cdr record
will have its DONT_TOUCH flag set, which will force the cdr_answer, cdr_end, and cdr_setvar
functions to leave that cdr record alone.
And, last but not least, the original cdr record has its LOCKED flag set. Almost all internal CDR
functions (except for the funcs that set the end, and answer times, and set a variable) will honor
this flag and leave a LOCKED cdr record alone. This means that the newly created forked cdr
record will be affected by events transpiring within Asterisk, with the previously noted exceptions.
Syntax
ForkCDR([options])
Arguments
options
a - Update the answer time on the NEW CDR just after it's been inited. The new CDR may have been answered already. The
reset that forkcdr does will erase the answer time. This will bring it back, but the answer time will be a copy of the fork/start time.
It will only do this if the initial cdr was indeed already answered.
A - Lock the original CDR against the answer time being updated. This will allow the disposition on the original CDR to remain
the same.
d - Copy the disposition forward from the old cdr, after the init.
D - Clear the dstchannel on the new CDR after reset.
e - End the original CDR. Do this after all the necessary data is copied from the original CDR to the new forked CDR.
r - Do NOT reset the new cdr.
s(name=val) - Set the CDR var name in the original CDR, with value val.
T - Mark the original CDR with a DONT_TOUCH flag. setvar, answer, and end cdr funcs will obey this flag; normally they don't
honor the LOCKED flag set on the original CDR record. Using this flag may cause CDR's not to have their end times updated! It
is suggested that if you specify this flag, you might wish to use the Using this flag may cause CDR's not to have their end times
updated! It is suggested that if you specify this flag, you might wish to use the e flag as well!.
v - When the new CDR is forked, it gets a copy of the vars attached to the current CDR. The vars attached to the original CDR
are removed unless this option is specified.
See Also
Function_CDR
Application_NoCDR
Application_ResetCDR
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_GetCPEID
GetCPEID()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Get ADSI CPE ID.
Description
Obtains and displays ADSI CPE ID and other information in order to properly setup dahdi.conf
for on-hook operations.
Syntax
GetCPEID()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Gosub
Gosub()
Synopsis
Jump to label, saving return address.
Description
Jumps to the label specified, saving the return address.
Syntax
Gosub([context[,exten,arg1[,...][,argN]]])
Arguments
context
exten
priority
arg1
argN
See Also
Application_GosubIf
Application_Macro
Application_Goto
Application_Return
Application_StackPop
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_GosubIf
GosubIf()
Synopsis
Conditionally jump to label, saving return address.
Description
If the condition is true, then jump to labeliftrue. If false, jumps to labeliffalse, if specified. In either
case, a jump saves the return point in the dialplan, to be returned to with a Return.
Syntax
GosubIf(condition?[labeliftrue][:labeliffalse])
Arguments
condition
destination
labeliftrue
labeliffalse
See Also
Application_Gosub
Application_Return
Application_MacroIf
Function_IF
Application_GotoIf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Goto
Goto()
Synopsis
Jump to a particular priority, extension, or context.
Description
This application will set the current context, extension, and priority in the channel structure. After
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
it completes, the pbx engine will continue dialplan execution at the specified location. If no
specific extension, or extension and context, are specified, then this application will just set the
specified priority of the current extension.
At least a priority is required as an argument, or the goto will return a -1, and the channel and
call will be terminated.
If the location that is put into the channel information is bogus, and asterisk cannot find that
location in the dialplan, then the execution engine will try to find and execute the code in the i
(invalid) extension in the current context. If that does not exist, it will try to execute the h
extension. If neither the h nor i extensions have been defined, the channel is hung up, and the
execution of instructions on the channel is terminated. What this means is that, for example, you
specify a context that does not exist, then it will not be possible to find the h or i extensions, and
the call will terminate!
Syntax
Goto([context[,extensions,priority]])
Arguments
context
extensions
priority
See Also
Application_GotoIf
Application_GotoIfTime
Application_Gosub
Application_Macro
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r324178.
Application_GotoIf
GotoIf()
Synopsis
Conditional goto.
Description
This application will set the current context, extension, and priority in the channel structure based
on the evaluation of the given condition. After this application completes, the pbx engine will
continue dialplan execution at the specified location in the dialplan. The labels are specified with
the same syntax as used within the Goto application. If the label chosen by the condition is
omitted, no jump is performed, and the execution passes to the next instruction. If the target
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
location is bogus, and does not exist, the execution engine will try to find and execute the code in
the i (invalid) extension in the current context. If that does not exist, it will try to execute the h
extension. If neither the h nor i extensions have been defined, the channel is hung up, and the
execution of instructions on the channel is terminated. Remember that this command can set the
current context, and if the context specified does not exist, then it will not be able to find any 'h' or
'i' extensions there, and the channel and call will both be terminated!.
Syntax
GotoIf(condition?[labeliftrue][:labeliffalse])
Arguments
condition
destination
labeliftrue - Continue at labeliftrue if the condition is true.
labeliffalse - Continue at labeliffalse if the condition is false.
See Also
Application_Goto
Application_GotoIfTime
Application_GosubIf
Application_MacroIf
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r324178.
Application_GotoIfTime
GotoIfTime()
Synopsis
Conditional Goto based on the current time.
Description
This application will set the context, extension, and priority in the channel structure based on the
evaluation of the given time specification. After this application completes, the pbx engine will
continue dialplan execution at the specified location in the dialplan. If the current time is within
the given time specification, the channel will continue at labeliftrue. Otherwise the channel will
continue at labeliffalse. If the label chosen by the condition is omitted, no jump is performed, and
execution passes to the next instruction. If the target jump location is bogus, the same actions
would be taken as for Goto. Further information on the time specification can be found in
examples illustrating how to do time-based context includes in the dialplan.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
GotoIfTime(timesweekdaysmdaysmonths[,timezone]?[labeliftrue][:labeliffalse])
Arguments
condition
times
weekdays
mdays
months
timezone
destination
labeliftrue
labeliffalse
See Also
Application_GotoIf
Function_IFTIME
Function_TESTTIME
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Hangup
Hangup()
Synopsis
Hang up the calling channel.
Description
This application will hang up the calling channel.
Syntax
Hangup([causecode])
Arguments
causecode - If a causecode is given the channel's hangup cause will be set to the given value.
See Also
Application_Answer
Application_Busy
Application_Congestion
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_IAX2Provision
IAX2Provision()
Synopsis
Provision a calling IAXy with a given template.
Description
Provisions the calling IAXy (assuming the calling entity is in fact an IAXy) with the given template.
Returns -1 on error or 0 on success.
Syntax
IAX2Provision([template])
Arguments
template - If not specified, defaults to default.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ICES
ICES()
Synopsis
Encode and stream using 'ices'.
Description
Streams to an icecast server using ices (available separately). A configuration file must be
supplied for ices (see contrib/asterisk-ices.xml).
ICES version 2 client and server required.ICES version 2 client and server required.
Syntax
ICES(config)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
config - ICES configuration file.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ImportVar
ImportVar()
Synopsis
Import a variable from a channel into a new variable.
Description
This application imports a variable from the specified channel (as opposed to the current one)
and stores it as a variable ( newvar ) in the current channel (the channel that is calling this
application). Variables created by this application have the same inheritance properties as those
created with the Set application.
Syntax
ImportVar(newvar=channelnamevariable)
Arguments
newvar
vardata
channelname
variable
See Also
Application_Set
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Incomplete
Incomplete()
Synopsis
Returns AST_PBX_INCOMPLETE value.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Signals the PBX routines that the previous matched extension is incomplete and that further
input should be allowed before matching can be considered to be complete. Can be used within
a pattern match when certain criteria warrants a longer match.
Syntax
Incomplete([n])
Arguments
n - If specified, then Incomplete will not attempt to answer the channel first. Most channel types need to be in Answer state in order to
receive DTMF.Most channel types need to be in Answer state in order to receive DTMF.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_IVRDemo
IVRDemo()
Synopsis
IVR Demo Application.
Description
This is a skeleton application that shows you the basic structure to create your own asterisk
applications and demonstrates the IVR demo.
Syntax
IVRDemo(filename)
Arguments
filename
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JabberJoin
JabberJoin()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Join a chat room
Description
Allows Asterisk to join a chat room.
Syntax
JabberJoin(Jabber,RoomJID[,Nickname])
Arguments
Jabber - Client or transport Asterisk uses to connect to Jabber.
RoomJID - XMPP/Jabber JID (Name) of chat room.
Nickname - The nickname Asterisk will use in the chat room. If a different nickname is supplied to an already joined room, the old nick
will be changed to the new one.If a different nickname is supplied to an already joined room, the old nick will be changed to the new one.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JabberLeave
JabberLeave()
Synopsis
Leave a chat room
Description
Allows Asterisk to leave a chat room.
Syntax
JabberLeave(Jabber,RoomJID[,Nickname])
Arguments
Jabber - Client or transport Asterisk uses to connect to Jabber.
RoomJID - XMPP/Jabber JID (Name) of chat room.
Nickname - The nickname Asterisk uses in the chat room.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JabberSend
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
JabberSend()
Synopsis
Sends an XMPP message to a buddy.
Description
Sends the content of message as text message from the given account to the buddy identified by
jid
Example: JabberSend(asterisk,bob@domain.com,Hello world) sends "Hello world" to
bob@domain.com as an XMPP message from the account asterisk, configured in jabber.conf.
Syntax
JabberSend(account,jid,message)
Arguments
account - The local named account to listen on (specified in jabber.conf)
jid - Jabber ID of the buddy to send the message to. It can be a bare JID (username@domain) or a full JID
(username@domain/resource).
message - The message to send.
See Also
Function_JABBER_STATUS
Function_JABBER_RECEIVE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JabberSendGroup
JabberSendGroup()
Synopsis
Send a Jabber Message to a specified chat room
Description
Allows user to send a message to a chat room via XMPP.
To be able to send messages to a chat room, a user must have previously joined it. Use the To
be able to send messages to a chat room, a user must have previously joined it. Use the
JabberJoin function to do so.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
JabberSendGroup(Jabber,RoomJID,Message[,Nickname])
Arguments
Jabber - Client or transport Asterisk uses to connect to Jabber.
RoomJID - XMPP/Jabber JID (Name) of chat room.
Message - Message to be sent to the chat room.
Nickname - The nickname Asterisk uses in the chat room.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JabberStatus
JabberStatus()
Synopsis
Retrieve the status of a jabber list member
Description
This application is deprecated. Please use the JABBER_STATUS() function instead.
Retrieves the numeric status associated with the specified buddy JID. The return value in the
Variable will be one of the following.
Online.
Chatty.
Away.
Extended Away.
Do Not Disturb.
Offline.
Not In Roster.
Syntax
JabberStatus(Jabber,JID,Variable)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Jabber - Client or transport Asterisk users to connect to Jabber.
JID - XMPP/Jabber JID (Name) of recipient.
Variable - Variable to store the status of requested user.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_JACK
JACK()
Synopsis
Jack Audio Connection Kit
Description
When executing this application, two jack ports will be created; one input and one output. Other
applications can be hooked up to these ports to access audio coming from, or being send to the
channel.
Syntax
JACK([options])
Arguments
options
s
name - Connect to the specified jack server name
i
name - Connect the output port that gets created to the specified jack input port
o
name - Connect the input port that gets created to the specified jack output port
c
name - By default, Asterisk will use the channel name for the jack client name. Use this option to specify a custom client
name.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Log
Log()
Synopsis
Send arbitrary text to a selected log level.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Sends an arbitrary text message to a selected log level.
Syntax
Log(level,message)
Arguments
level - Level must be one of ERROR, WARNING, NOTICE, DEBUG, VERBOSE or DTMF.
message - Output text message.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Macro
Macro()
Synopsis
Macro Implementation.
Description
Executes a macro using the context macro- name, jumping to the s extension of that context and
executing each step, then returning when the steps end.
The calling extension, context, and priority are stored in The calling extension, context, and
priority are stored in None - MACRO_EXTEN, The calling extension, context, and priority are
stored in None - MACRO_CONTEXT and The calling extension, context, and priority are stored in
None - MACRO_PRIORITY respectively. Arguments become The calling extension, context, and
priority are stored in None - ARG1, The calling extension, context, and priority are stored in None
- ARG2, etc in the macro context.
If you Goto out of the Macro context, the Macro will terminate and control will be returned at the
location of the Goto.
If If None - MACRO_OFFSET is set at termination, Macro will attempt to continue at priority
MACRO_OFFSET + N + 1 if such a step exists, and N + 1 otherwise.
Because of the way Macro is implemented (it executes the priorities contained within it via
sub-engine), and a fixed per-thread memory stack allowance, macros are limited to 7 levels of
nesting (macro calling macro calling macro, etc.); It may be possible that stack-intensive
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
applications in deeply nested macros could cause asterisk to crash earlier than this limit. It is
advised that if you need to deeply nest macro calls, that you use the Gosub application (now
allows arguments like a Macro) with explict Return() calls instead.
Use of the application WaitExten within a macro will not function as expected. Please use the
Read application in order to read DTMF from a channel currently executing a macro.
Syntax
Macro(name[,arg1[,arg2[,...]]])
Arguments
name - The name of the macro
args
arg1
arg2
See Also
Application_MacroExit
Application_Goto
Application_Gosub
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MacroExclusive
MacroExclusive()
Synopsis
Exclusive Macro Implementation.
Description
Executes macro defined in the context macro- name. Only one call at a time may run the macro.
(we'll wait if another call is busy executing in the Macro)
Arguments and return values as in application Macro()
Use of the application WaitExten within a macro will not function as expected. Please use the
Read application in order to read DTMF from a channel currently executing a macro.
Syntax
MacroExclusive(name[,arg1[,arg2[,...]]])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
name - The name of the macro
arg1
arg2
See Also
Application_Macro
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MacroExit
MacroExit()
Synopsis
Exit from Macro.
Description
Causes the currently running macro to exit as if it had ended normally by running out of priorities
to execute. If used outside a macro, will likely cause unexpected behavior.
Syntax
MacroExit()
Arguments
See Also
Application_Macro
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MacroIf
MacroIf()
Synopsis
Conditional Macro implementation.
Description
Executes macro defined in macroiftrue if expr is true (otherwise macroiffalse if provided)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments and return values as in application Macro()
Use of the application WaitExten within a macro will not function as expected. Please use the
Read application in order to read DTMF from a channel currently executing a macro.
Syntax
MacroIf(expr?macroiftrue[:macroiffalse])
Arguments
expr
destination
macroiftrue
macroiffalse
See Also
Application_GotoIf
Application_GosubIf
Function_IF
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MailboxExists
MailboxExists()
Synopsis
Check to see if Voicemail mailbox exists.
Description
Check to see if the specified mailbox exists. If no voicemail context is specified, the default
context will be used.
This application will set the following channel variable upon completion:
VMBOXEXISTSSTATUS - This will contain the status of the execution of the MailboxExists application. Possible values include:
SUCCESS
FAILED
Syntax
MailboxExists(mailbox[@context][,options])
Arguments
mailbox
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
mailbox
context
options - None options.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MeetMe
MeetMe()
Synopsis
MeetMe conference bridge.
Description
Enters the user into a specified MeetMe conference. If the confno is omitted, the user will be
prompted to enter one. User can exit the conference by hangup, or if the p option is specified, by
pressing #.
The DAHDI kernel modules and at least one hardware driver (or dahdi_dummy) must be present
for conferencing to operate properly. In addition, the chan_dahdi channel driver must be loaded
for the The DAHDI kernel modules and at least one hardware driver (or dahdi_dummy) must be
present for conferencing to operate properly. In addition, the chan_dahdi channel driver must be
loaded for the i and r options to operate at all.
Syntax
MeetMe([confno[,options[,pin]]])
Arguments
confno - The conference number
options
a - Set admin mode.
A - Set marked mode.
b - Run AGI script specified in MEETME_AGI_BACKGROUND Default:
conf-background.agi. This does not work with non-DAHDI channels in the same conference).This does not work with
non-DAHDI channels in the same conference).
c - Announce user(s) count on joining a conference.
C - Continue in dialplan when kicked out of conference.
d - Dynamically add conference.
D - Dynamically add conference, prompting for a PIN.
e - Select an empty conference.
E - Select an empty pinless conference.
F - Pass DTMF through the conference.
G - Play an intro announcement in conference.
x - The file to playback
i - Announce user join/leave with review.
I - Announce user join/leave without review.
l - Set listen only mode (Listen only, no talking).
m - Set initially muted.
M - Enable music on hold when the conference has a single caller. Optionally, specify a musiconhold class to use. If one is not
provided, it will use the channel's currently set music class, or default.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
class
o - Set talker optimization - treats talkers who aren't speaking as being muted, meaning (a) No encode is done on transmission
and (b) Received audio that is not registered as talking is omitted causing no buildup in background noise.
p - Allow user to exit the conference by pressing # (default) or any of the defined keys. If keys contain * this will override option s
. The key used is set to channel variable MEETME_EXIT_KEY.
keys
P - Always prompt for the pin even if it is specified.
q - Quiet mode (don't play enter/leave sounds).
r - Record conference (records as MEETME_RECORDINGFILE using format MEETME_RECORDINGFORMAT. Default filename is
meetme-conf-rec-${CONFNO}-${UNIQUEID} and the default format is wav.
s - Present menu (user or admin) when * is received (send to menu).
t - Set talk only mode. (Talk only, no listening).
T - Set talker detection (sent to manager interface and meetme list).
w - Wait until the marked user enters the conference.
secs
x - Close the conference when last marked user exits
X - Allow user to exit the conference by entering a valid single digit extension MEETME_EXIT_CONTEXT or the current context if
that variable is not defined.
1 - Do not play message when first person enters
S - Kick the user x seconds after he entered into the conference.
x
L - Limit the conference to x ms. Play a warning when y ms are left. Repeat the warning every z ms. The following special
variables can be used with this option: File to play when time is up. File to play as warning if y is defined. The default is to say the
time remaining.
x
y
z
pin
See Also
Application_MeetMeCount
Application_MeetMeAdmin
Application_MeetMeChannelAdmin
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MeetMeAdmin
MeetMeAdmin()
Synopsis
MeetMe conference administration.
Description
Run admin command for conference confno.
Will additionally set the variable Will additionally set the variable None - MEETMEADMINSTATUS
with one of the following values:
MEETMEADMINSTATUS NOPARSE - Invalid arguments.
NOTFOUND - User specified was not found.
FAILED - Another failure occurred.
OK - The operation was completed successfully.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MeetMeAdmin(confno,command[,user])
Arguments
confno
command
e - Eject last user that joined.
E - Extend conference end time, if scheduled.
k - Kick one user out of conference.
K - Kick all users out of conference.
l - Unlock conference.
L - Lock conference.
m - Unmute one user.
M - Mute one user.
n - Unmute all users in the conference.
N - Mute all non-admin users in the conference.
r - Reset one user's volume settings.
R - Reset all users volume settings.
s - Lower entire conference speaking volume.
S - Raise entire conference speaking volume.
t - Lower one user's talk volume.
T - Raise one user's talk volume.
u - Lower one user's listen volume.
U - Raise one user's listen volume.
v - Lower entire conference listening volume.
V - Raise entire conference listening volume.
user
See Also
Application_MeetMe
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MeetMeChannelAdmin
MeetMeChannelAdmin()
Synopsis
MeetMe conference Administration (channel specific).
Description
Run admin command for a specific channel in any conference.
Syntax
MeetMeChannelAdmin(channel,command)
Arguments
channel
command
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
k - Kick the specified user out of the conference he is in.
m - Unmute the specified user.
M - Mute the specified user.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r324178.
Application_MeetMeCount
MeetMeCount()
Synopsis
MeetMe participant count.
Description
Plays back the number of users in the specified MeetMe conference. If var is specified, playback
will be skipped and the value will be returned in the variable. Upon application completion,
MeetMeCount will hangup the channel, unless priority n+1 exists, in which case priority progress
will continue.
Syntax
MeetMeCount(confno[,var])
Arguments
confno - Conference number.
var
See Also
Application_MeetMe
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Milliwatt
Milliwatt()
Synopsis
Generate a Constant 1004Hz tone at 0dbm (mu-law).
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Previous versions of this application generated the tone at 1000Hz. If for some reason you would
prefer that behavior, supply the o option to get the old behavior.
Syntax
Milliwatt([options])
Arguments
options
o - Generate the tone at 1000Hz like previous version.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmAccMess
MinivmAccMess()
Synopsis
Record account specific messages.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf.
Use this application to record account specific audio/video messages for busy, unavailable and
temporary messages.
Account specific directories will be created if they do not exist.
MVM_ACCMESS_STATUS - This is the result of the attempt to record the specified greeting. FAILED is set if the file can't be created.
SUCCESS
FAILED
Syntax
MinivmAccMess(usernamedomain[,options])
Arguments
mailbox
username - Voicemail username
domain - Voicemail domain
options
u - Record the unavailable greeting.
b - Record the busy greeting.
t - Record the temporary greeting.
n - Account name.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmDelete
MinivmDelete()
Synopsis
Delete Mini-Voicemail voicemail messages.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf.
It deletes voicemail file set in MVM_FILENAME or given filename.
MVM_DELETE_STATUS - This is the status of the delete operation.
SUCCESS
FAILED
Syntax
MinivmDelete(filename)
Arguments
filename - File to delete
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmGreet
MinivmGreet()
Synopsis
Play Mini-Voicemail prompts.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf.
MinivmGreet() plays default prompts or user specific prompts for an account.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Busy and unavailable messages can be choosen, but will be overridden if a temporary message
exists for the account.
MVM_GREET_STATUS - This is the status of the greeting playback.
SUCCESS
USEREXIT
FAILED
Syntax
MinivmGreet(usernamedomain[,options])
Arguments
mailbox
username - Voicemail username
domain - Voicemail domain
options
b - Play the busy greeting to the calling party.
s - Skip the playback of instructions for leaving a message to the calling party.
u - Play the unavailable greeting.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmMWI
MinivmMWI()
Synopsis
Send Message Waiting Notification to subscriber(s) of mailbox.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf.
MinivmMWI is used to send message waiting indication to any devices whose channels have
subscribed to the mailbox passed in the first parameter.
Syntax
MinivmMWI(usernamedomain,urgent,new,old)
Arguments
mailbox
username - Voicemail username
domain - Voicemail domain
urgent - Number of urgent messages in mailbox.
new - Number of new messages in mailbox.
old - Number of old messages in mailbox.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmNotify
MinivmNotify()
Synopsis
Notify voicemail owner about new messages.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf.
MiniVMnotify forwards messages about new voicemail to e-mail and pager. If there's no user
account for that address, a temporary account will be used with default options (set in
minivm.conf ).
If the channel variable If the channel variable None - MVM_COUNTER is set, this will be used in the
message file name and available in the template for the message.
If no template is given, the default email template will be used to send email and default pager
template to send paging message (if the user account is configured with a paging address.
MVM_NOTIFY_STATUS - This is the status of the notification attempt
SUCCESS
FAILED
Syntax
MinivmNotify(usernamedomain[,options])
Arguments
mailbox
username - Voicemail username
domain - Voicemail domain
options
template - E-mail template to use for voicemail notification
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MinivmRecord
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MinivmRecord()
Synopsis
Receive Mini-Voicemail and forward via e-mail.
Description
This application is part of the Mini-Voicemail system, configured in minivm.conf
MiniVM records audio file in configured format and forwards message to e-mail and pager.
If there's no user account for that address, a temporary account will be used with default options.
The recorded file name and path will be stored in The recorded file name and path will be stored
in None - MVM_FILENAME and the duration of the message will be stored in The recorded file
name and path will be stored in None - MVM_DURATION
If the caller hangs up after the recording, the only way to send the message and clean up is to
execute in the If the caller hangs up after the recording, the only way to send the message and
clean up is to execute in the h extension. The application will exit if any of the following DTMF
digits are received and the requested extension exist in the current context.
MVM_RECORD_STATUS - This is the status of the record operation
SUCCESS
USEREXIT
FAILED
Syntax
MinivmRecord(usernamedomain[,options])
Arguments
mailbox
username - Voicemail username
domain - Voicemail domain
options
0 - Jump to the o extension in the current dialplan context.
* - Jump to the a extension in the current dialplan context.
g - Use the specified amount of gain when recording the voicemail message. The units are whole-number decibels (dB).
gain - Amount of gain to use
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MixMonitor
MixMonitor()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Record a call and mix the audio during the recording. Use of StopMixMonitor is required to
guarantee the audio file is available for processing during dialplan execution.
Description
Records the audio on the current channel to the specified file.
This application does not automatically answer and should be preceeded by an application such
as Answer or Progress().
MIXMONITOR_FILENAME - Will contain the filename used to record.
Syntax
MixMonitor(filenameextension[,options[,command]])
Arguments
file
filename - If filename is an absolute path, uses that path, otherwise creates the file in the configured monitoring directory from
asterisk.conf.
extension
options
a - Append to the file instead of overwriting it.
b - Only save audio to the file while the channel is bridged. Does not include conferences or sounds played to each bridged
partyDoes not include conferences or sounds played to each bridged party If you utilize this option inside a Local channel, you
must make sure the Local channel is not optimized away. To do this, be sure to call your Local channel with the If you utilize this
option inside a Local channel, you must make sure the Local channel is not optimized away. To do this, be sure to call your Local
channel with the /n option. For example: Dial(Local/start@mycontext/n)
v - Adjust the heard volume by a factor of x (range -4 to 4 )
x
V - Adjust the spoken volume by a factor of x (range -4 to 4 )
x
W - Adjust both, heard and spoken volumes by a factor of x (range -4 to 4 )
x
command - Will be executed when the recording is over. Any strings matching ^{X} will be unescaped to X. All variables will be evaluated
at the time MixMonitor is called.
See Also
Application_Monitor
Application_StopMixMonitor
Application_PauseMonitor
Application_UnpauseMonitor
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_Monitor
Monitor()
Synopsis
Monitor a channel.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Used to start monitoring a channel. The channel's input and output voice packets are logged to
files until the channel hangs up or monitoring is stopped by the StopMonitor application.
By default, files are stored to /var/spool/asterisk/monitor/. Returns -1 if monitor files
can't be opened or if the channel is already monitored, otherwise 0.
Syntax
Monitor([file_format[:urlbase][,fname_base[,options]]])
Arguments
file_format
file_format - optional, if not set, defaults to wav
urlbase
fname_base - if set, changes the filename used to the one specified.
options
m - when the recording ends mix the two leg files into one and delete the two leg files. If the variable MONITOR_EXEC is set, the
application referenced in it will be executed instead of soxmix/sox and the raw leg files will NOT be deleted automatically.
soxmix/sox or MONITOR_EXEC is handed 3 arguments, the two leg files and a target mixed file name which is the same as the
leg file names only without the in/out designator. If MONITOR_EXEC_ARGS is set, the contents will be passed on as additional
arguments to MONITOR_EXEC. Both MONITOR_EXEC and the Mix flag can be set from the administrator interface.
b - Don't begin recording unless a call is bridged to another channel.
i - Skip recording of input stream (disables m option).
o - Skip recording of output stream (disables m option).
See Also
Application_StopMonitor
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Morsecode
Morsecode()
Synopsis
Plays morse code.
Description
Plays the Morse code equivalent of the passed string.
This application does not automatically answer and should be preceeded by an application such
as Answer() or Progress().
This application uses the following variables:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MORSEDITLEN - Use this value in (ms) for length of dit
MORSETONE - The pitch of the tone in (Hz), default is 800
Syntax
Morsecode(string)
Arguments
string - String to playback as morse code to channel
See Also
Application_SayAlpha
Application_SayPhonetic
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_MP3Player
MP3Player()
Synopsis
Play an MP3 file or M3U playlist file or stream.
Description
Executes mpg123 to play the given location, which typically would be a mp3 filename or m3u
playlist filename or a URL. Please read http://en.wikipedia.org/wiki/M3U to see how M3U playlist
file format is like, Example usage would be exten =>
1234,1,MP3Player(/var/lib/asterisk/playlist.m3u) User can exit by pressing any key on the
dialpad, or by hanging up.
This application does not automatically answer and should be preceeded by an application such
as Answer() or Progress().
Syntax
MP3Player(Location)
Arguments
Location - Location of the file to be played. (argument passed to mpg123)
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_MSet
MSet()
Synopsis
Set channel variable(s) or function value(s).
Description
This function can be used to set the value of channel variables or dialplan functions. When
setting variables, if the variable name is prefixed with {}, the variable will be inherited into
channels created from the current channel If the variable name is prefixed with _, the variable will
be inherited into channels created from the current channel and all children channels. MSet
behaves in a similar fashion to the way Set worked in 1.2/1.4 and is thus prone to doing things
that you may not expect. For example, it strips surrounding double-quotes from the right-hand
side (value). If you need to put a separator character (comma or vert-bar), you will need to
escape them by inserting a backslash before them. Avoid its use if possible.
Syntax
MSet(name1value1[,name2value2[,...]])
Arguments
set1
name1
value1
set2
name2
value2
See Also
Application_Set
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_MusicOnHold
MusicOnHold()
Synopsis
Play Music On Hold indefinitely.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Plays hold music specified by class. If omitted, the default music source for the channel will be
used. Change the default class with Set(CHANNEL(musicclass)=...). If duration is given, hold
music will be played specified number of seconds. If duration is ommited, music plays
indefinitely. Returns 0 when done, -1 on hangup.
This application does not automatically answer and should be preceeded by an application such
as Answer() or Progress().
Syntax
MusicOnHold(class[,duration])
Arguments
class
duration
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_NBScat
NBScat()
Synopsis
Play an NBS local stream.
Description
Executes nbscat to listen to the local NBS stream. User can exit by pressing any key.
Syntax
NBScat()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_NoCDR
NoCDR()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Tell Asterisk to not maintain a CDR for the current call
Description
This application will tell Asterisk not to maintain a CDR for the current call.
Syntax
NoCDR()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_NoOp
NoOp()
Synopsis
Do Nothing (No Operation).
Description
This application does nothing. However, it is useful for debugging purposes.
This method can be used to see the evaluations of variables or functions without having any
effect.
Syntax
NoOp([text])
Arguments
text - Any text provided can be viewed at the Asterisk CLI.
See Also
Application_Verbose
Application_Log
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ODBC_Commit
ODBC_Commit()
Synopsis
Commits a currently open database transaction.
Description
Commits the database transaction specified by transaction ID or the current active transaction, if
not specified.
Syntax
ODBC_Commit([transaction ID])
Arguments
transaction ID
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ODBC_Rollback
ODBC_Rollback()
Synopsis
Rollback a currently open database transaction.
Description
Rolls back the database transaction specified by transaction ID or the current active transaction,
if not specified.
Syntax
ODBC_Rollback([transaction ID])
Arguments
transaction ID
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ODBCFinish
ODBCFinish()
Synopsis
Clear the resultset of a sucessful multirow query.
Description
For queries which are marked as mode=multirow, this will clear any remaining rows of the
specified resultset.
Syntax
ODBCFinish(result-id)
Arguments
result-id
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Originate
Originate()
Synopsis
Originate a call.
Description
This application originates an outbound call and connects it to a specified extension or
application. This application will block until the outgoing call fails or gets answered. At that point,
this application will exit with the status variable set and dialplan processing will continue.
This application sets the following channel variable before exiting:
ORIGINATE_STATUS - This indicates the result of the call origination.
FAILED
SUCCESS
BUSY
CONGESTION
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
HANGUP
RINGING
UNKNOWN - In practice, you should never see this value. Please report it to the issue tracker if you ever see it.
Syntax
Originate(tech_data,type,arg1[,arg2[,arg3]])
Arguments
tech_data - Channel technology and data for creating the outbound channel. For example, SIP/1234.
type - This should be app or exten, depending on whether the outbound channel should be connected to an application or extension.
arg1 - If the type is app, then this is the application name. If the type is exten, then this is the context that the channel will be sent to.
arg2 - If the type is app, then this is the data passed as arguments to the application. If the type is exten, then this is the extension that
the channel will be sent to.
arg3 - If the type is exten, then this is the priority that the channel is sent to. If the type is app, then this parameter is ignored.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_OSPAuth
OSPAuth()
Synopsis
OSP Authentication.
Description
Authenticate a call by OSP.
Input variables:
OSPINPEERIP - The last hop IP address.
OSPINTOKEN - The inbound OSP token.
Output variables:
OSPINHANDLE - The inbound call OSP transaction handle.
OSPINTIMELIMIT - The inbound call duration limit in seconds.
This application sets the following channel variable upon completion:
OSPAUTHSTATUS - The status of OSPAuth attempt as a text string, one of
SUCCESS
FAILED
ERROR
Syntax
OSPAuth([provider[,options]])
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
provider - The name of the provider that authenticates the call.
options - Reserverd.
See Also
Application_OSPLookup
Application_OSPNext
Application_OSPFinish
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_OSPFinish
OSPFinish()
Synopsis
Report OSP entry.
Description
Report call state.
Input variables:
OSPINHANDLE - The inbound call OSP transaction handle.
OSPOUTHANDLE - The outbound call OSP transaction handle.
OSPAUTHSTATUS - The OSPAuth status.
OSPLOOKUPSTATUS - The OSPLookup status.
OSPNEXTSTATUS - The OSPNext status.
OSPINAUDIOQOS - The inbound call leg audio QoS string.
OSPOUTAUDIOQOS - The outbound call leg audio QoS string.
This application sets the following channel variable upon completion:
OSPFINISHSTATUS - The status of the OSPFinish attempt as a text string, one of
SUCCESS
FAILED
ERROR
Syntax
OSPFinish([cause[,options]])
Arguments
cause - Hangup cause.
options - Reserved.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_OSPAuth
Application_OSPLookup
Application_OSPNext
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_OSPLookup
OSPLookup()
Synopsis
Lookup destination by OSP.
Description
Looks up destination via OSP.
Input variables:
OSPINACTUALSRC - The actual source device IP address in indirect mode.
OSPINPEERIP - The last hop IP address.
OSPINHANDLE - The inbound call OSP transaction handle.
OSPINTIMELIMIT - The inbound call duration limit in seconds.
OSPINNETWORKID - The inbound source network ID.
OSPINNPRN - The inbound routing number.
OSPINNPCIC - The inbound carrier identification code.
OSPINNPDI - The inbound number portability database dip indicator.
OSPINSPID - The inbound service provider identity.
OSPINOCN - The inbound operator company number.
OSPINSPN - The inbound service provider name.
OSPINALTSPN - The inbound alternate service provider name.
OSPINMCC - The inbound mobile country code.
OSPINMNC - The inbound mobile network code.
OSPINTOHOST - The inbound To header host part.
OSPINDIVUSER - The inbound Diversion header user part.
OSPINDIVHOST - The inbound Diversion header host part.
OSPINCUSTOMINFOn - The inbound custom information, where n is the index beginning with 1 upto 8.
Output variables:
OSPOUTHANDLE - The outbound call OSP transaction handle.
OSPOUTTECH - The outbound channel technology for the call.
OSPDESTINATION - The outbound destination IP address.
OSPOUTCALLING - The outbound calling number.
OSPOUTCALLED - The outbound called number.
OSPOUTNETWORKID - The outbound destination network ID.
OSPOUTNPRN - The outbound routing number.
OSPOUTNPCIC - The outbound carrier identification code.
OSPOUTNPDI - The outbound number portability database dip indicator.
OSPOUTSPID - The outbound service provider identity.
OSPOUTOCN - The outbound operator company number.
OSPOUTSPN - The outbound service provider name.
OSPOUTALTSPN - The outbound alternate service provider name.
OSPOUTMCC - The outbound mobile country code.
OSPOUTMNC - The outbound mobile network code.
OSPOUTTOKEN - The outbound OSP token.
OSPDESTREMAILS - The number of remained destinations.
OSPOUTTIMELIMIT - The outbound call duration limit in seconds.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
OSPOUTCALLIDTYPES - The outbound Call-ID types.
OSPOUTCALLID - The outbound Call-ID. Only for H.323.
OSPDIALSTR - The outbound Dial command string.
This application sets the following channel variable upon completion:
OSPLOOKUPSTATUS - The status of OSPLookup attempt as a text string, one of
SUCCESS
FAILED
ERROR
Syntax
OSPLookup(exten[,provider[,options]])
Arguments
exten - The exten of the call.
provider - The name of the provider that is used to route the call.
options
h - generate H323 call id for the outbound call
s - generate SIP call id for the outbound call. Have not been implemented
i - generate IAX call id for the outbound call. Have not been implemented
See Also
Application_OSPAuth
Application_OSPNext
Application_OSPFinish
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r338609.
Application_OSPNext
OSPNext()
Synopsis
Lookup next destination by OSP.
Description
Looks up the next destination via OSP.
Input variables:
OSPINHANDLE - The inbound call OSP transaction handle.
OSPOUTHANDLE - The outbound call OSP transaction handle.
OSPINTIMELIMIT - The inbound call duration limit in seconds.
OSPOUTCALLIDTYPES - The outbound Call-ID types.
OSPDESTREMAILS - The number of remained destinations.
Output variables:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
OSPOUTTECH - The outbound channel technology.
OSPDESTINATION - The destination IP address.
OSPOUTCALLING - The outbound calling number.
OSPOUTCALLED - The outbound called number.
OSPOUTNETWORKID - The outbound destination network ID.
OSPOUTNPRN - The outbound routing number.
OSPOUTNPCIC - The outbound carrier identification code.
OSPOUTNPDI - The outbound number portability database dip indicator.
OSPOUTSPID - The outbound service provider identity.
OSPOUTOCN - The outbound operator company number.
OSPOUTSPN - The outbound service provider name.
OSPOUTALTSPN - The outbound alternate service provider name.
OSPOUTMCC - The outbound mobile country code.
OSPOUTMNC - The outbound mobile network code.
OSPOUTTOKEN - The outbound OSP token.
OSPDESTREMAILS - The number of remained destinations.
OSPOUTTIMELIMIT - The outbound call duration limit in seconds.
OSPOUTCALLID - The outbound Call-ID. Only for H.323.
OSPDIALSTR - The outbound Dial command string.
This application sets the following channel variable upon completion:
OSPNEXTSTATUS - The status of the OSPNext attempt as a text string, one of
SUCCESS
FAILED
ERROR
Syntax
OSPNext()
Arguments
See Also
Application_OSPAuth
Application_OSPLookup
Application_OSPFinish
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Page
Page()
Synopsis
Page series of phones
Description
Places outbound calls to the given technology / resource and dumps them into a conference
bridge as muted participants. The original caller is dumped into the conference as a speaker and
the room is destroyed when the original callers leaves.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
Page(Technology/Resource[&Technology2/Resource2[&...]][,options[,timeout]])
Arguments
Technology/Resource
Technology/Resource - Specification of the device(s) to dial. These must be in the format of Technology/Resource,
where Technology represents a particular channel driver, and Resource represents a resource available to that particular
channel driver.
Technology2/Resource2 - Optional extra devices to dial inparallel If you need more then one enter them as
Technology2/Resource2& Technology3/Resourse3&.....
options
d - Full duplex audio
i - Ignore attempts to forward the call
q - Quiet, do not play beep to caller
r - Record the page into a file (meetme option r )
s - Only dial a channel if its device state says that it is NOT_INUSE
A - Play an announcement simultaneously to all paged participants
x - The announcement to playback in all devices
n - Do not play simultaneous announcement to caller (implies A
)
timeout - Specify the length of time that the system will attempt to connect a call. After this duration, any intercom calls that have not
been answered will be hung up by the system.
See Also
Application_MeetMe
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Park
Park()
Synopsis
Park yourself.
Description
Used to park yourself (typically in combination with a supervised transfer to know the parking
space).
If you set the If you set the None - PARKINGEXTEN variable to a parking space extension in the
parking lot, Park() will attempt to park the call on that extension. If the extension is already is in
use then execution will continue at the next priority.
If the parkeddynamic option is enabled in features.conf the following variables can be
used to dynamically create new parking lots.
If you set the If you set the None - PARKINGDYNAMIC variable and this parking lot exists then it
will be used as a template for the newly created dynamic lot. Otherwise, the default parking lot
will be used.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
If you set the If you set the None - PARKINGDYNCONTEXT variable then the newly created
dynamic parking lot will use this context.
If you set the If you set the None - PARKINGDYNEXTEN variable then the newly created dynamic
parking lot will use this extension to access the parking lot.
If you set the If you set the None - PARKINGDYNPOS variable then the newly created dynamic
parking lot will use those parking postitions.
This application must be used as the first extension priority to be recognized as a parking access
extension. DTMF transfers and some channel drivers need this distinction to operate properly.
The parking access extension in this case is treated like a dialplan hint.This application must be
used as the first extension priority to be recognized as a parking access extension. DTMF
transfers and some channel drivers need this distinction to operate properly. The parking access
extension in this case is treated like a dialplan hint.
Parking lots automatically create and manage dialplan extensions in the parking lot context. You
do not need to explicitly use this application in your dialplan. Instead, all you should do is include
the parking lot context in your dialplan.Parking lots automatically create and manage dialplan
extensions in the parking lot context. You do not need to explicitly use this application in your
dialplan. Instead, all you should do is include the parking lot context in your dialplan.
Syntax
Park([timeout[,return_context[,return_exten[,return_priority[,options[,parking_
Arguments
timeout - A custom parking timeout for this parked call. Value in milliseconds.
return_context - The context to return the call to after it times out.
return_exten - The extension to return the call to after it times out.
return_priority - The priority to return the call to after it times out.
options - A list of options for this parked call.
r - Send ringing instead of MOH to the parked call.
R - Randomize the selection of a parking space.
s - Silence announcement of the parking space number.
parking_lot_name - Specify in which parking lot to park a call. The parking lot used is selected in the following order: 1)
parking_lot_name option 2) PARKINGLOT variable 3) CHANNEL(parkinglot) function (Possibly preset by the channel driver.) 4)
Default parking lot.
See Also
Application_ParkAndAnnounce
Application_ParkedCall
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r332176.
Application_ParkAndAnnounce
ParkAndAnnounce()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Park and Announce.
Description
Park a call into the parkinglot and announce the call to another channel.
The variable The variable None - PARKEDAT will contain the parking extension into which the call
was placed. Use with the Local channel to allow the dialplan to make use of this information.
Syntax
ParkAndAnnounce(announce[:announce1[:...]],timeout,dial[,return_context])
Arguments
announce_template
announce - Colon-separated list of files to announce. The word PARKED will be replaced by a say_digits of the extension in
which the call is parked.
announce1
timeout - Time in seconds before the call returns into the return context.
dial - The app_dial style resource to call to make the announcement. Console/dsp calls the console.
return_context - The goto-style label to jump the call back into after timeout. Default priority+1.
See Also
Application_Park
Application_ParkedCall
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ParkedCall
ParkedCall()
Synopsis
Retrieve a parked call.
Description
Used to retrieve a parked call from a parking lot.
Parking lots automatically create and manage dialplan extensions in the parking lot context. You
do not need to explicitly use this application in your dialplan. Instead, all you should do is include
the parking lot context in your dialplan.Parking lots automatically create and manage dialplan
extensions in the parking lot context. You do not need to explicitly use this application in your
dialplan. Instead, all you should do is include the parking lot context in your dialplan.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
ParkedCall([exten[,parking_lot_name]])
Arguments
exten - Parking space extension to retrieve a parked call. If not provided then the first available parked call in the parking lot will be
retrieved.
parking_lot_name - Specify from which parking lot to retrieve a parked call. The parking lot used is selected in the following order: 1)
parking_lot_name option 2) PARKINGLOT variable 3) CHANNEL(parkinglot) function (Possibly preset by the channel driver.) 4)
Default parking lot.
See Also
Application_Park
Application_ParkAndAnnounce
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r332176.
Application_PauseMonitor
PauseMonitor()
Synopsis
Pause monitoring of a channel.
Description
Pauses monitoring of a channel until it is re-enabled by a call to UnpauseMonitor.
Syntax
PauseMonitor()
Arguments
See Also
Application_UnpauseMonitor
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_PauseQueueMember
PauseQueueMember()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Pauses a queue member.
Description
Pauses (blocks calls for) a queue member. The given interface will be paused in the given
queue. This prevents any calls from being sent from the queue to the interface until it is
unpaused with UnpauseQueueMember or the manager interface. If no queuename is given, the
interface is paused in every queue it is a member of. The application will fail if the interface is not
found.
This application sets the following channel variable upon completion:
PQMSTATUS - The status of the attempt to pause a queue member as a text string.
PAUSED
NOTFOUND
Example: PauseQueueMember(,SIP/3000)
Syntax
PauseQueueMember([queuename,interface[,options[,reason]]])
Arguments
queuename
interface
options
reason - Is used to add extra information to the appropriate queue_log entries and manager events.
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Pickup
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Pickup()
Synopsis
Directed extension call pickup.
Description
This application can pickup any ringing channel that is calling the specified extension. If no
context is specified, the current context will be used. If you use the special string PICKUPMARK
for the context parameter, for example 10@PICKUPMARK, this application tries to find a channel
which has defined a This application can pickup any ringing channel that is calling the specified
None - PICKUPMARK channel variable with the same value as extension (in this example, 10 ).
When no parameter is specified, the application will pickup a channel matching the pickup group
of the active channel.
Syntax
Pickup(extension[@context][&extension2[@context2][&...]])
Arguments
ext
extension
context
ext2
extension2
context2
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_PickupChan
PickupChan()
Synopsis
Pickup a ringing channel.
Description
This will pickup a specified channel if ringing.
Syntax
PickupChan(Technology/Resource[&Technology2/Resource2[&...]][,options])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Technology/Resource
Technology/Resource
Technology2/Resource2
options
p - Channel name specified partial name. Used when find channel by callid.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r329203.
Application_Playback
Playback()
Synopsis
Play a file.
Description
Plays back given filenames (do not put extension of wav/alaw etc). The playback command
answer the channel if no options are specified. If the file is non-existant it will fail
This application sets the following channel variable upon completion:
PLAYBACKSTATUS - The status of the playback attempt as a text string.
SUCCESS
FAILED
See Also: Background (application) – for playing sound files that are interruptible
WaitExten (application) – wait for digits from caller, optionally play music on hold
Syntax
Playback(filename[&filename2[&...]][,options])
Arguments
filenames
filename
filename2
options - Comma separated list of options
skip - Do not play if not answered
noanswer - Playback without answering, otherwise the channel will be answered before the sound is played. Not all channel
types support playing messages while still on hook.Not all channel types support playing messages while still on hook.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_PlayTones
PlayTones()
Synopsis
Play a tone list.
Description
Plays a tone list. Execution will continue with the next step in the dialplan immediately while the
tones continue to play.
See the sample indications.conf for a description of the specification of a tonelist.
Syntax
PlayTones(arg)
Arguments
arg - Arg is either the tone name defined in the indications.conf configuration file, or a directly specified list of frequencies and
durations.
See Also
Application_StopPlayTones
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_PrivacyManager
PrivacyManager()
Synopsis
Require phone number to be entered, if no CallerID sent
Description
If no Caller*ID is sent, PrivacyManager answers the channel and asks the caller to enter their
phone number. The caller is given maxretries attempts to do so. The application does nothing if
Caller*ID was received on the channel.
The application sets the following channel variable upon completion:
PRIVACYMGRSTATUS - The status of the privacy manager's attempt to collect a phone number from the user.
SUCCESS
FAILED
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
PrivacyManager([maxretries[,minlength[,options[,context]]]])
Arguments
maxretries - Total tries caller is allowed to input a callerid. Defaults to 3.
minlength - Minimum allowable digits in the input callerid number. Defaults to 10.
options - Position reserved for options.
context - Context to check the given callerid against patterns.
See Also
Application_Zapateller
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r321436.
Application_Proceeding
Proceeding()
Synopsis
Indicate proceeding.
Description
This application will request that a proceeding message be provided to the calling channel.
Syntax
Proceeding()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Progress
Progress()
Synopsis
Indicate progress.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This application will request that in-band progress information be provided to the calling channel.
Syntax
Progress()
Arguments
See Also
Application_Busy
Application_Congestion
Application_Ringing
Application_PlayTones
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Queue
Queue()
Synopsis
Queue a call for a call queue.
Description
In addition to transferring the call, a call may be parked and then picked up by another user.
This application will return to the dialplan if the queue does not exist, or any of the join options
cause the caller to not enter the queue.
This application does not automatically answer and should be preceeded by an application such
as Answer(), Progress(), or Ringing().
This application sets the following channel variable upon completion:
QUEUESTATUS - The status of the call as a text string.
TIMEOUT
FULL
JOINEMPTY
LEAVEEMPTY
JOINUNAVAIL
LEAVEUNAVAIL
CONTINUE
Syntax
Queue(queuename[,options[,URL[,announceoverride[,timeout[,AGI[,macro[,gosub[,ru
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
queuename
options
C - Mark all calls as "answered elsewhere" when cancelled.
c - Continue in the dialplan if the callee hangs up.
d - data-quality (modem) call (minimum delay).
h - Allow callee to hang up by pressing *.
H - Allow caller to hang up by pressing *.
n - No retries on the timeout; will exit this application and go to the next step.
i - Ignore call forward requests from queue members and do nothing when they are requested.
I - Asterisk will ignore any connected line update requests or any redirecting party update requests it may receive on this dial
attempt.
r - Ring instead of playing MOH. Periodic Announcements are still made, if applicable.
R - Ring instead of playing MOH when a member channel is actually ringing.
t - Allow the called user to transfer the calling user.
T - Allow the calling user to transfer the call.
w - Allow the called user to write the conversation to disk via Monitor.
W - Allow the calling user to write the conversation to disk via Monitor.
k - Allow the called party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
K - Allow the calling party to enable parking of the call by sending the DTMF sequence defined for call parking in
features.conf.
x - Allow the called user to write the conversation to disk via MixMonitor.
X - Allow the calling user to write the conversation to disk via MixMonitor.
URL - URL will be sent to the called party if the channel supports it.
announceoverride
timeout - Will cause the queue to fail out after a specified number of seconds, checked between each queues.conf timeout and retry
cycle.
AGI - Will setup an AGI script to be executed on the calling party's channel once they are connected to a queue member.
macro - Will run a macro on the calling party's channel once they are connected to a queue member.
gosub - Will run a gosub on the calling party's channel once they are connected to a queue member.
rule - Will cause the queue's defaultrule to be overridden by the rule specified.
position - Attempt to enter the caller into the queue at the numerical position specified. 1 would attempt to enter the caller at the head
of the queue, and 3 would attempt to place the caller third in the queue.
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_QueueLog
QueueLog()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Writes to the queue_log file.
Description
Allows you to write your own events into the queue log.
Example: QueueLog(101,${UNIQUEID},${AGENT},WENTONBREAK,600)
Syntax
QueueLog(queuename,uniqueid,agent,event[,additionalinfo])
Arguments
queuename
uniqueid
agent
event
additionalinfo
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_RaiseException
RaiseException()
Synopsis
Handle an exceptional condition.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This application will jump to the e extension in the current context, setting the dialplan function
EXCEPTION(). If the e extension does not exist, the call will hangup.
Syntax
RaiseException(reason)
Arguments
reason
See Also
Function_EXCEPTION
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Read
Read()
Synopsis
Read a variable.
Description
Reads a #-terminated string of digits a certain number of times from the user in to the given
variable.
This application sets the following channel variable upon completion:
READSTATUS - This is the status of the read operation.
OK
ERROR
HANGUP
INTERRUPTED
SKIPPED
TIMEOUT
Syntax
Read(variable[,filename[&filename2[&...]][,maxdigits[,options[,attempts[,timeou
Arguments
variable - The input digits will be stored in the given variable name.
filenames
filename - file(s) to play before reading digits or tone with option i
filename2
maxdigits - Maximum acceptable number of digits. Stops reading after maxdigits have been entered (without requiring the user to
press the # key). Defaults to 0 - no limit - wait for the user press the # key. Any value below 0 means the same. Max accepted value is
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
255.
options
s - to return immediately if the line is not up.
i - to play filename as an indication tone from your indications.conf.
n - to read digits even if the line is not up.
attempts - If greater than 1, that many attempts will be made in the event no data is entered.
timeout - The number of seconds to wait for a digit response. If greater than 0, that value will override the default timeout. Can be
floating point.
See Also
Application_SendDTMF
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ReadExten
ReadExten()
Synopsis
Read an extension into a variable.
Description
Reads a # terminated string of digits from the user into the given variable.
Will set READEXTENSTATUS on exit with one of the following statuses:
READEXTENSTATUS OK - A valid extension exists in ${variable}.
TIMEOUT - No extension was entered in the specified time. Also sets ${variable} to "t".
INVALID - An invalid extension, ${INVALID_EXTEN}, was entered. Also sets ${variable} to "i".
SKIP - Line was not up and the option 's' was specified.
ERROR - Invalid arguments were passed.
Syntax
ReadExten(variable[,filename[,context[,option[,timeout]]]])
Arguments
variable
filename - File to play before reading digits or tone with option i
context - Context in which to match extensions.
option
s - Return immediately if the channel is not answered.
i - Play filename as an indication tone from your indications.conf or a directly specified list of frequencies and durations.
n - Read digits even if the channel is not answered.
timeout - An integer number of seconds to wait for a digit response. If greater than 0, that value will override the default timeout.
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ReadFile
ReadFile()
Synopsis
Read the contents of a text file into a channel variable.
Description
Read the contents of a text file into channel variable varname
ReadFile has been deprecated in favor of Set(varname=${FILE(file,0,length)})
Syntax
ReadFile(varname=file[,length])
Arguments
varname - Result stored here.
fileparams
file - The name of the file to read.
length - Maximum number of characters to capture. If not specified defaults to max.
See Also
Application_System
Application_Read
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ReceiveFax
ReceiveFax()
Synopsis
Receive a FAX and save as a TIFF/F file.
Description
This application is provided by res_fax, which is a FAX technology agnostic module that utilizes
FAX technology resource modules to complete a FAX transmission.
Session arguments can be set by the FAXOPT function and to check results of the ReceiveFax()
application.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
ReceiveFax(filename[,options])
Arguments
filename
options
d - Enable FAX debugging.
f - Allow audio fallback FAX transfer on T.38 capable channels.
s - Send progress Manager events (overrides statusevents setting in res_fax.conf).
See Also
Function_FAXOPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_ReceiveFAX (app_fax)
ReceiveFAX()
Synopsis
Receive a Fax
Description
Receives a FAX from the channel into the given filename overwriting the file if it already exists.
File created will be in TIFF format.
This application sets the following channel variables:
LOCALSTATIONID - To identify itself to the remote end
LOCALHEADERINFO - To generate a header line on each page
FAXSTATUS SUCCESS
FAILED
FAXERROR - Cause of failure
REMOTESTATIONID - The CSID of the remote side
FAXPAGES - Number of pages sent
FAXBITRATE - Transmission rate
FAXRESOLUTION - Resolution of sent fax
Syntax
ReceiveFAX(filename[,c])
Arguments
filename - Filename of TIFF file save incoming fax
c - Makes the application behave as the calling machine (Default behavior is as answering machine)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_ReceiveFax (res_fax)
ReceiveFax()
Synopsis
Receive a FAX and save as a TIFF/F file.
Description
This application is provided by res_fax, which is a FAX technology agnostic module that utilizes
FAX technology resource modules to complete a FAX transmission.
Session arguments can be set by the FAXOPT function and to check results of the ReceiveFax()
application.
Syntax
ReceiveFax(filename[,options])
Arguments
filename
options
d - Enable FAX debugging.
f - Allow audio fallback FAX transfer on T.38 capable channels.
s - Send progress Manager events (overrides statusevents setting in res_fax.conf).
See Also
Function_FAXOPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_Record
Record()
Synopsis
Record to a file.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
If filename contains %d, these characters will be replaced with a number incremented by one
each time the file is recorded. Use core show file formats to see the available formats on
your system User can press # to terminate the recording and continue to the next priority. If the
user hangs up during a recording, all data will be lost and the application will terminate.
RECORDED_FILE - Will be set to the final filename of the recording.
RECORD_STATUS - This is the final status of the command
DTMF - A terminating DTMF was received ('#' or '*', depending upon option 't')
SILENCE - The maximum silence occurred in the recording.
SKIP - The line was not yet answered and the 's' option was specified.
TIMEOUT - The maximum length was reached.
HANGUP - The channel was hung up.
ERROR - An unrecoverable error occurred, which resulted in a WARNING to the logs.
Syntax
Record(filenameformat[,silence[,maxduration[,options]]])
Arguments
filename
filename
format - Is the format of the file type to be recorded (wav, gsm, etc).
silence - Is the number of seconds of silence to allow before returning.
maxduration - Is the maximum recording duration in seconds. If missing or 0 there is no maximum.
options
a - Append to existing recording rather than replacing.
n - Do not answer, but record anyway if line not yet answered.
q - quiet (do not play a beep tone).
s - skip recording if the line is not yet answered.
t - use alternate '*' terminator key (DTMF) instead of default '#'
x - Ignore all terminator keys (DTMF) and keep recording until hangup.
k - Keep recorded file upon hangup.
y - Terminate recording if any DTMF digit is received.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_RemoveQueueMember
RemoveQueueMember()
Synopsis
Dynamically removes queue members.
Description
If the interface is NOT in the queue it will return an error.
This application sets the following channel variable upon completion:
RQMSTATUS REMOVED
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
NOTINQUEUE
NOSUCHQUEUE
Example: RemoveQueueMember(techsupport,SIP/3000)
Syntax
RemoveQueueMember(queuename[,interface[,options]])
Arguments
queuename
interface
options
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_ResetCDR
ResetCDR()
Synopsis
Resets the Call Data Record.
Description
This application causes the Call Data Record to be reset.
Syntax
ResetCDR([options])
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
options
w - Store the current CDR record before resetting it.
a - Store any stacked records.
v - Save CDR variables.
e - Enable CDR only (negate effects of NoCDR).
See Also
Application_ForkCDR
Application_NoCDR
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_RetryDial
RetryDial()
Synopsis
Place a call, retrying on failure allowing an optional exit extension.
Description
This application will attempt to place a call using the normal Dial application. If no channel can be
reached, the announce file will be played. Then, it will wait sleep number of seconds before
retrying the call. After retries number of attempts, the calling channel will continue at the next
priority in the dialplan. If the retries setting is set to 0, this application will retry endlessly. While
waiting to retry a call, a 1 digit extension may be dialed. If that extension exists in either the
context defined in This application will attempt to place a call using the normal Dial application. If
no channel can be reached, the None - EXITCONTEXT or the current one, The call will jump to
that extension immediately. The dialargs are specified in the same format that arguments are
provided to the Dial application.
Syntax
RetryDial(announce,sleep,retries,dialargs)
Arguments
announce - Filename of sound that will be played when no channel can be reached
sleep - Number of seconds to wait after a dial attempt failed before a new attempt is made
retries - Number of retries When this is reached flow will continue at the next priority in the dialplan
dialargs - Same format as arguments provided to the Dial application
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_Return
Return()
Synopsis
Return from gosub routine.
Description
Jumps to the last label on the stack, removing it. The return value, if any, is saved in the channel
variable Jumps to the last label on the stack, removing it. The return None - GOSUB_RETVAL.
Syntax
Return([value])
Arguments
value - Return value.
See Also
Application_Gosub
Application_StackPop
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Ringing
Ringing()
Synopsis
Indicate ringing tone.
Description
This application will request that the channel indicate a ringing tone to the user.
Syntax
Ringing()
Arguments
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_Busy
Application_Congestion
Application_Progress
Application_PlayTones
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayAlpha
SayAlpha()
Synopsis
Say Alpha.
Description
This application will play the sounds that correspond to the letters of the given string.
Syntax
SayAlpha(string)
Arguments
string
See Also
Application_SayDigits
Application_SayNumber
Application_SayPhonetic
Function_CHANNEL
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayCountedAdj
SayCountedAdj()
Synopsis
Say a adjective in declined form in order to count things
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Selects and plays the proper form of an adjective according to the gender and of the noun which
it modifies and the number of objects named by the noun-verb combination which have been
counted. Used when saying things such as "5 new messages". The various singular and plural
forms of the adjective are selected by adding suffixes to filename.
If the channel language is English, then no suffix will ever be added (since, in English, adjectives
are not declined). If the channel language is Russian or some other slavic language, then the
suffix will the specified gender for nominative, and "x" for genative plural. (The genative singular
is not used when counting things.) For example, SayCountedAdj(1,new,f) will play sound file
"newa" (containing the word "novaya"), but SayCountedAdj(5,new,f) will play sound file "newx"
(containing the word "novikh").
This application does not automatically answer and should be preceeded by an application such
as Answer(), Progress(), or Proceeding().
Syntax
SayCountedAdj(number,filename[,gender])
Arguments
number - The number of things
filename - File name stem for the adjective
gender - The gender of the noun modified, one of 'm', 'f', 'n', or 'c'
See Also
Application_SayCountedNoun
Application_SayNumber
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_SayCountedNoun
SayCountedNoun()
Synopsis
Say a noun in declined form in order to count things
Description
Selects and plays the proper singular or plural form of a noun when saying things such as "five
calls". English has simple rules for deciding when to say "call" and when to say "calls", but other
languages have complicated rules which would be extremely difficult to implement in the Asterisk
dialplan language.
The correct sound file is selected by examining the number and adding the appropriate suffix to
filename. If the channel language is English, then the suffix will be either empty or "s". If the
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
channel language is Russian or some other Slavic language, then the suffix will be empty for
nominative, "x1" for genative singular, and "x2" for genative plural.
Note that combining filename with a suffix will not necessarily produce a correctly spelled plural
form. For example, SayCountedNoun(2,man) will play the sound file "mans" rather than "men".
This behavior is intentional. Since the file name is never seen by the end user, there is no need
to implement complicated spelling rules. We simply record the word "men" in the sound file
named "mans".
This application does not automatically answer and should be preceeded by an application such
as Answer() or Progress.
Syntax
SayCountedNoun(number,filename)
Arguments
number - The number of things
filename - File name stem for the noun that is the the name of the things
See Also
Application_SayCountedAdj
Application_SayNumber
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r336877.
Application_SayCountPL
SayCountPL()
Synopsis
Say Polish counting words.
Description
Polish grammar has some funny rules for counting words. for example 1 zloty, 2 zlote, 5 zlotych.
This application will take the words for 1, 2-4 and 5 and decide based on grammar rules which
one to use with the number you pass to it.
Example: SayCountPL(zloty,zlote,zlotych,122) will give: zlote
Syntax
SayCountPL(word1,word2,word5,number)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
word1
word2
word5
number
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayDigits
SayDigits()
Synopsis
Say Digits.
Description
This application will play the sounds that correspond to the digits of the given number. This will
use the language that is currently set for the channel.
Syntax
SayDigits(digits)
Arguments
digits
See Also
Application_SayAlpha
Application_SayNumber
Application_SayPhonetic
Function_CHANNEL
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayNumber
SayNumber()
Synopsis
Say Number.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
This application will play the sounds that correspond to the given digits. Optionally, a gender may
be specified. This will use the language that is currently set for the channel. See the
LANGUAGE() function for more information on setting the language for the channel.
Syntax
SayNumber(digits[,gender])
Arguments
digits
gender
See Also
Application_SayAlpha
Application_SayDigits
Application_SayPhonetic
Function_CHANNEL
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayPhonetic
SayPhonetic()
Synopsis
Say Phonetic.
Description
This application will play the sounds from the phonetic alphabet that correspond to the letters in
the given string.
Syntax
SayPhonetic(string)
Arguments
string
See Also
Application_SayAlpha
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_SayDigits
Application_SayNumber
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SayUnixTime
SayUnixTime()
Synopsis
Says a specified time in a custom format.
Description
Uses some of the sound files stored in /var/lib/asterisk/sounds to construct a phrase
saying the specified date and/or time in the specified format.
Syntax
SayUnixTime([unixtime[,timezone[,format]]])
Arguments
unixtime - time, in seconds since Jan 1, 1970. May be negative. Defaults to now.
timezone - timezone, see /usr/share/zoneinfo for a list. Defaults to machine default.
format - a format the time is to be said in. See voicemail.conf. Defaults to ABdY "digits/at" IMp
See Also
Function_STRFTIME
Function_STRPTIME
Function_IFTIME
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SendDTMF
SendDTMF()
Synopsis
Sends arbitrary DTMF digits
Description
DTMF digits sent to a channel with half second pause
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
It will pass all digits or terminate if it encounters an error.
Syntax
SendDTMF(digits[,timeout_ms[,duration_ms[,channel]]])
Arguments
digits - List of digits 0-9,*#,abcd
timeout_ms - Amount of time to wait in ms between tones. (defaults to.25s)
duration_ms - Duration of each digit
channel - Channel where digits will be played
See Also
Application_Read
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SendFax
SendFax()
Synopsis
Sends a specified TIFF/F file as a FAX.
Description
This application is provided by res_fax, which is a FAX technology agnostic module that utilizes
FAX technology resource modules to complete a FAX transmission.
Session arguments can be set by the FAXOPT function and to check results of the SendFax()
application.
Syntax
SendFax([filename2[&...]][,options])
Arguments
filename
filename2 - TIFF file to send as a FAX.
options
d - Enable FAX debugging.
f - Allow audio fallback FAX transfer on T.38 capable channels.
s - Send progress Manager events (overrides statusevents setting in res_fax.conf).
z - Initiate a T.38 reinvite on the channel if the remote end does not.
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_FAXOPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_SendFAX (app_fax)
SendFAX()
Synopsis
Send a Fax
Description
Send a given TIFF file to the channel as a FAX.
This application sets the following channel variables:
LOCALSTATIONID - To identify itself to the remote end
LOCALHEADERINFO - To generate a header line on each page
FAXSTATUS SUCCESS
FAILED
FAXERROR - Cause of failure
REMOTESTATIONID - The CSID of the remote side
FAXPAGES - Number of pages sent
FAXBITRATE - Transmission rate
FAXRESOLUTION - Resolution of sent fax
Syntax
SendFAX(filename[,a])
Arguments
filename - Filename of TIFF file to fax
a - Makes the application behave as the answering machine (Default behavior is as calling machine)
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_SendFax (res_fax)
SendFax()
Synopsis
Sends a specified TIFF/F file as a FAX.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
This application is provided by res_fax, which is a FAX technology agnostic module that utilizes
FAX technology resource modules to complete a FAX transmission.
Session arguments can be set by the FAXOPT function and to check results of the SendFax()
application.
Syntax
SendFax([filename2[&...]][,options])
Arguments
filename
filename2 - TIFF file to send as a FAX.
options
d - Enable FAX debugging.
f - Allow audio fallback FAX transfer on T.38 capable channels.
s - Send progress Manager events (overrides statusevents setting in res_fax.conf).
z - Initiate a T.38 reinvite on the channel if the remote end does not.
See Also
Function_FAXOPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r312509.
Application_SendImage
SendImage()
Synopsis
Sends an image file.
Description
Send an image file on a channel supporting it.
Result of transmission will be stored in Result of transmission will be stored in None SENDIMAGESTATUS
SENDIMAGESTATUS SUCCESS - Transmission succeeded.
FAILURE - Transmission failed.
UNSUPPORTED - Image transmission not supported by channel.
Syntax
SendImage(filename)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
filename - Path of the filename (image) to send.
See Also
Application_SendText
Application_SendURL
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SendText
SendText()
Synopsis
Send a Text Message.
Description
Sends text to current channel (callee).
Result of transmission will be stored in the Result of transmission will be stored in the None SENDTEXTSTATUS
SENDTEXTSTATUS SUCCESS - Transmission succeeded.
FAILURE - Transmission failed.
UNSUPPORTED - Text transmission not supported by channel.
At this moment, text is supposed to be 7 bit ASCII in most channels.At this moment, text is
supposed to be 7 bit ASCII in most channels.
Syntax
SendText(text)
Arguments
text
See Also
Application_SendImage
Application_SendURL
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SendURL
SendURL()
Synopsis
Send a URL.
Description
Requests client go to URL (IAX2) or sends the URL to the client (other channels).
Result is returned in the Result is returned in the None - SENDURLSTATUS channel variable:
SENDURLSTATUS SUCCESS - URL successfully sent to client.
FAILURE - Failed to send URL.
NOLOAD - Client failed to load URL (wait enabled).
UNSUPPORTED - Channel does not support URL transport.
SendURL continues normally if the URL was sent correctly or if the channel does not support
HTML transport. Otherwise, the channel is hung up.
Syntax
SendURL(URL[,option])
Arguments
URL
option
w - Execution will wait for an acknowledgement that the URL has been loaded before continuing.
See Also
Application_SendImage
Application_SendText
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Set
Set()
Synopsis
Set channel variable or function value.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This function can be used to set the value of channel variables or dialplan functions. When
setting variables, if the variable name is prefixed with {}, the variable will be inherited into
channels created from the current channel. If the variable name is prefixed with _, the variable
will be inherited into channels created from the current channel and all children channels.
If (and only if), in If (and only if), in /etc/asterisk/asterisk.conf, you have a compat
category, and you have app_set = 1.4 under that, then the behavior of this app changes, and
strips surrounding quotes from the right hand side as it did previously in 1.4. The advantages of
not stripping out quoting, and not caring about the separator characters (comma and vertical bar)
were sufficient to make these changes in 1.6. Confusion about how many backslashes would be
needed to properly protect separators and quotes in various database access strings has been
greatly reduced by these changes.
Syntax
Set(name,value)
Arguments
name
value
See Also
Application_MSet
Function_GLOBAL
Function_SET
Function_ENV
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r334234.
Application_SetAMAFlags
SetAMAFlags()
Synopsis
Set the AMA Flags.
Description
This application will set the channel's AMA Flags for billing purposes.
Syntax
SetAMAFlags([flag])
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
flag
See Also
Function_CDR
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SetCallerPres
SetCallerPres()
Synopsis
Set CallerID Presentation.
Description
Set Caller*ID presentation on a call.
Syntax
SetCallerPres(presentation)
Arguments
presentation
allowed_not_screened - Presentation Allowed, Not Screened.
allowed_passed_screen - Presentation Allowed, Passed Screen.
allowed_failed_screen - Presentation Allowed, Failed Screen.
allowed - Presentation Allowed, Network Number.
prohib_not_screened - Presentation Prohibited, Not Screened.
prohib_passed_screen - Presentation Prohibited, Passed Screen.
prohib_failed_screen - Presentation Prohibited, Failed Screen.
prohib - Presentation Prohibited, Network Number.
unavailable - Number Unavailable.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SetMusicOnHold
SetMusicOnHold()
Synopsis
Set default Music On Hold class.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
!!! DEPRECATED. USe Set(CHANNEL(musicclass)=...) instead !!!
Sets the default class for music on hold for a given channel. When music on hold is activated,
this class will be used to select which music is played.
!!! DEPRECATED. USe Set(CHANNEL(musicclass)=...) instead !!!
Syntax
SetMusicOnHold(class)
Arguments
class
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SIPAddHeader
SIPAddHeader()
Synopsis
Add a SIP header to the outbound call.
Description
Adds a header to a SIP call placed with DIAL.
Remember to use the X-header if you are adding non-standard SIP headers, like
X-Asterisk-Accountcode:. Use this with care. Adding the wrong headers may jeopardize
the SIP dialog.
Always returns 0.
Syntax
SIPAddHeader(Header,Content)
Arguments
Header
Content
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SIPDtmfMode
SIPDtmfMode()
Synopsis
Change the dtmfmode for a SIP call.
Description
Changes the dtmfmode for a SIP call.
Syntax
SIPDtmfMode(mode)
Arguments
mode
inband
info
rfc2833
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SIPRemoveHeader
SIPRemoveHeader()
Synopsis
Remove SIP headers previously added with SIPAddHeader
Description
SIPRemoveHeader() allows you to remove headers which were previously added with
SIPAddHeader(). If no parameter is supplied, all previously added headers will be removed. If a
parameter is supplied, only the matching headers will be removed.
For example you have added these 2 headers:
SIPAddHeader(P-Asserted-Identity: sip:foo@bar);
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SIPAddHeader(P-Preferred-Identity: sip:bar@foo);
// remove all headers
SIPRemoveHeader();
// remove all P- headers
SIPRemoveHeader(P-);
// remove only the PAI header (note the : at the end)
SIPRemoveHeader(P-Asserted-Identity
;
Always returns 0.
Syntax
SIPRemoveHeader([Header])
Arguments
Header
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Skel
Skel()
Synopsis
Simple one line explaination.
Description
This application is a template to build other applications from. It shows you the basic structure to
create your own Asterisk applications.
Syntax
Skel(dummy[,options])
Arguments
dummy
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
options
a - Option A.
b - Option B.
c - Option C.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SLAStation
SLAStation()
Synopsis
Shared Line Appearance Station.
Description
This application should be executed by an SLA station. The argument depends on how the call
was initiated. If the phone was just taken off hook, then the argument station should be just the
station name. If the call was initiated by pressing a line key, then the station name should be
preceded by an underscore and the trunk name associated with that line button.
For example:
station1_line1
On exit, this application will set the variable On exit, this application will set the variable None SLASTATION_STATUS to one of the following values:
SLASTATION_STATUS FAILURE
CONGESTION
SUCCESS
Syntax
SLAStation(station)
Arguments
station - Station name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SLATrunk
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SLATrunk()
Synopsis
Shared Line Appearance Trunk.
Description
This application should be executed by an SLA trunk on an inbound call. The channel calling this
application should correspond to the SLA trunk with the name trunk that is being passed as an
argument.
On exit, this application will set the variable On exit, this application will set the variable None SLATRUNK_STATUS to one of the following values:
SLATRUNK_STATUS FAILURE
SUCCESS
UNANSWERED
RINGTIMEOUT
Syntax
SLATrunk(trunk[,options])
Arguments
trunk - Trunk name
options
M - Play back the specified MOH class instead of ringing
class
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SMS
SMS()
Synopsis
Communicates with SMS service centres and SMS capable analogue phones.
Description
SMS handles exchange of SMS data with a call to/from SMS capable phone or SMS PSTN
service center. Can send and/or receive SMS messages. Works to ETSI ES 201 912; compatible
with BT SMS PSTN service in UK and Telecom Italia in Italy.
Typical usage is to use to handle calls from the SMS service centre CLI, or to set up a call using
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
outgoing or manager interface to connect service centre to SMS().
"Messages are processed as per text file message queues. smsq (a separate software) is a
command to generate message queues and send messages.
The protocol has tight delay bounds. Please use short frames and disable/keep short the jitter
buffer on the ATA to make sure that respones (ACK etc.) are received in time.The protocol has
tight delay bounds. Please use short frames and disable/keep short the jitter buffer on the ATA to
make sure that respones (ACK etc.) are received in time.
Syntax
SMS(name[,options[,addr[,body]]])
Arguments
name - The name of the queue used in /var/spool/asterisk/sms
options
a - Answer, i.e. send initial FSK packet.
s - Act as service centre talking to a phone.
t - Use protocol 2 (default used is protocol 1).
p - Set the initial delay to N ms (default is 300 ). addr and body are a deprecated format to send messages out.
r - Set the Status Report Request (SRR) bit.
o - The body should be coded as octets not 7-bit symbols.
addr
body
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SoftHangup
SoftHangup()
Synopsis
Hangs up the requested channel.
Description
Hangs up the requested channel. If there are no channels to hangup, the application will report it.
Syntax
SoftHangup(Technology/Resource[,options])
Arguments
Technology/Resource
options
a - Hang up all channels on a specified device instead of a single resource
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechActivateGrammar
SpeechActivateGrammar()
Synopsis
Activate a grammar.
Description
This activates the specified grammar to be recognized by the engine. A grammar tells the speech
recognition engine what to recognize, and how to portray it back to you in the dialplan. The
grammar name is the only argument to this application.
Syntax
SpeechActivateGrammar(grammar_name)
Arguments
grammar_name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechBackground
SpeechBackground()
Synopsis
Play a sound file and wait for speech to be recognized.
Description
This application plays a sound file and waits for the person to speak. Once they start speaking
playback of the file stops, and silence is heard. Once they stop talking the processing sound is
played to indicate the speech recognition engine is working. Once results are available the
application returns and results (score and text) are available using dialplan functions.
The first text and score are ${SPEECH_TEXT(0)} AND ${SPEECH_SCORE(0)} while the second
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
are ${SPEECH_TEXT(1)} and ${SPEECH_SCORE(1)}.
The first argument is the sound file and the second is the timeout integer in seconds.
Syntax
SpeechBackground(sound_file[,timeout[,options]])
Arguments
sound_file
timeout - Timeout integer in seconds. Note the timeout will only start once the sound file has stopped playing.
options
n - Don't answer the channel if it has not already been answered.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechCreate
SpeechCreate()
Synopsis
Create a Speech Structure.
Description
This application creates information to be used by all the other applications. It must be called
before doing any speech recognition activities such as activating a grammar. It takes the engine
name to use as the argument, if not specified the default engine will be used.
Syntax
SpeechCreate(engine_name)
Arguments
engine_name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechDeactivateGrammar
SpeechDeactivateGrammar()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Deactivate a grammar.
Description
This deactivates the specified grammar so that it is no longer recognized.
Syntax
SpeechDeactivateGrammar(grammar_name)
Arguments
grammar_name - The grammar name to deactivate
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechDestroy
SpeechDestroy()
Synopsis
End speech recognition.
Description
This destroys the information used by all the other speech recognition applications. If you call this
application but end up wanting to recognize more speech, you must call SpeechCreate() again
before calling any other application.
Syntax
SpeechDestroy()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechLoadGrammar
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SpeechLoadGrammar()
Synopsis
Load a grammar.
Description
Load a grammar only on the channel, not globally.
Syntax
SpeechLoadGrammar(grammar_name,path)
Arguments
grammar_name
path
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechProcessingSound
SpeechProcessingSound()
Synopsis
Change background processing sound.
Description
This changes the processing sound that SpeechBackground plays back when the speech
recognition engine is processing and working to get results.
Syntax
SpeechProcessingSound(sound_file)
Arguments
sound_file
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_SpeechStart
SpeechStart()
Synopsis
Start recognizing voice in the audio stream.
Description
Tell the speech recognition engine that it should start trying to get results from audio being fed to
it.
Syntax
SpeechStart()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_SpeechUnloadGrammar
SpeechUnloadGrammar()
Synopsis
Unload a grammar.
Description
Unload a grammar.
Syntax
SpeechUnloadGrammar(grammar_name)
Arguments
grammar_name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_StackPop
StackPop()
Synopsis
Remove one address from gosub stack.
Description
Removes last label on the stack, discarding it.
Syntax
StackPop()
Arguments
See Also
Application_Return
Application_Gosub
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_StartMusicOnHold
StartMusicOnHold()
Synopsis
Play Music On Hold.
Description
Starts playing music on hold, uses default music class for channel. Starts playing music specified
by class. If omitted, the default music source for the channel will be used. Always returns 0.
Syntax
StartMusicOnHold(class)
Arguments
class
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_StopMixMonitor
StopMixMonitor()
Synopsis
Stop recording a call through MixMonitor, and free the recording's file handle.
Description
Stops the audio recording that was started with a call to MixMonitor() on the current channel.
Syntax
StopMixMonitor()
Arguments
See Also
Application_MixMonitor
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_StopMonitor
StopMonitor()
Synopsis
Stop monitoring a channel.
Description
Stops monitoring a channel. Has no effect if the channel is not monitored.
Syntax
StopMonitor()
Arguments
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_StopMusicOnHold
StopMusicOnHold()
Synopsis
Stop playing Music On Hold.
Description
Stops playing music on hold.
Syntax
StopMusicOnHold()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_StopPlayTones
StopPlayTones()
Synopsis
Stop playing a tone list.
Description
Stop playing a tone list, initiated by PlayTones().
Syntax
StopPlayTones()
Arguments
See Also
Application_PlayTones
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_System
System()
Synopsis
Execute a system command.
Description
Executes a command by using system(). If the command fails, the console should report a
fallthrough.
Result of execution is returned in the Result of execution is returned in the None SYSTEMSTATUS channel variable:
SYSTEMSTATUS FAILURE - Could not execute the specified command.
SUCCESS - Specified command successfully executed.
Syntax
System(command)
Arguments
command - Command to execute
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_TestClient
TestClient()
Synopsis
Execute Interface Test Client.
Description
Executes test client with given testid. Results stored in
/var/log/asterisk/testreports/<testid>-client.txt
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
TestClient(testid)
Arguments
testid - An ID to identify this test.
See Also
Application_TestServer
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_TestServer
TestServer()
Synopsis
Execute Interface Test Server.
Description
Perform test server function and write call report. Results stored in
/var/log/asterisk/testreports/<testid>-server.txt
Syntax
TestServer()
Arguments
See Also
Application_TestClient
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Transfer
Transfer()
Synopsis
Transfer caller to remote extension.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Requests the remote caller be transferred to a given destination. If TECH (SIP, IAX2, LOCAL
etc) is used, only an incoming call with the same channel technology will be transfered. Note that
for SIP, if you transfer before call is setup, a 302 redirect SIP message will be returned to the
caller.
The result of the application will be reported in the The result of the application will be reported in
the None - TRANSFERSTATUS channel variable:
TRANSFERSTATUS SUCCESS - Transfer succeeded.
FAILURE - Transfer failed.
UNSUPPORTED - Transfer unsupported by channel driver.
Syntax
Transfer([Tech]destination)
Arguments
dest
Tech
destination
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_TryExec
TryExec()
Synopsis
Executes dialplan application, always returning.
Description
Allows an arbitrary application to be invoked even when not hard coded into the dialplan. To
invoke external applications see the application System. Always returns to the dialplan. The
channel variable TRYSTATUS will be set to one of:
TRYSTATUS SUCCESS - If the application returned zero.
FAILED - If the application returned non-zero.
NOAPP - If the application was not found or was not specified.
Syntax
TryExec(arguments)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
appname
arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_TrySystem
TrySystem()
Synopsis
Try executing a system command.
Description
Executes a command by using system().
Result of execution is returned in the Result of execution is returned in the None SYSTEMSTATUS channel variable:
SYSTEMSTATUS FAILURE - Could not execute the specified command.
SUCCESS - Specified command successfully executed.
APPERROR - Specified command successfully executed, but returned error code.
Syntax
TrySystem(command)
Arguments
command - Command to execute
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_UnpauseMonitor
UnpauseMonitor()
Synopsis
Unpause monitoring of a channel.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Unpauses monitoring of a channel on which monitoring had previously been paused with
PauseMonitor.
Syntax
UnpauseMonitor()
Arguments
See Also
Application_PauseMonitor
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_UnpauseQueueMember
UnpauseQueueMember()
Synopsis
Unpauses a queue member.
Description
Unpauses (resumes calls to) a queue member. This is the counterpart to
PauseQueueMember() and operates exactly the same way, except it unpauses instead of
pausing the given interface.
This application sets the following channel variable upon completion:
UPQMSTATUS - The status of the attempt to unpause a queue member as a text string.
UNPAUSED
NOTFOUND
Example: UnpauseQueueMember(,SIP/3000)
Syntax
UnpauseQueueMember([queuename,interface[,options[,reason]]])
Arguments
queuename
interface
options
reason - Is used to add extra information to the appropriate queue_log entries and manager events.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_UserEvent
UserEvent()
Synopsis
Send an arbitrary event to the manager interface.
Description
Sends an arbitrary event to the manager interface, with an optional body representing additional
arguments. The body may be specified as a , delimited list of headers. Each additional argument
will be placed on a new line in the event. The format of the event will be:
Event: UserEvent
UserEvent: <specified event name>
body
If no body is specified, only Event and UserEvent headers will be present.
Syntax
UserEvent(eventname[,body])
Arguments
eventname
body
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Verbose
Verbose()
Synopsis
Send arbitrary text to verbose output.
Description
Sends an arbitrary text message to verbose output.
Syntax
Verbose([level,message])
Arguments
level - Must be an integer value. If not specified, defaults to 0.
message - Output text message.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_VMAuthenticate
VMAuthenticate()
Synopsis
Authenticate with Voicemail passwords.
Description
This application behaves the same way as the Authenticate application, but the passwords are
taken from voicemail.conf. If the mailbox is specified, only that mailbox's password will be
considered valid. If the mailbox is not specified, the channel variable This application behaves
the same way as the Authenticate application, but the passwords are taken from None AUTH_MAILBOX will be set with the authenticated mailbox.
The VMAuthenticate application will exit if the following DTMF digit is entered as Mailbox or
Password, and the extension exists:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Jump to the a extension in the current dialplan context.
Syntax
VMAuthenticate([mailbox][@context][,options])
Arguments
mailbox
mailbox
context
options
s - Skip playing the initial prompts.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_VMSayName
VMSayName()
Synopsis
Play the name of a voicemail user
Description
This application will say the recorded name of the voicemail user specified as the argument to
this application. If no context is provided, default is assumed.
Syntax
VMSayName([mailbox][@context])
Arguments
mailbox
mailbox
context
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_VoiceMail
VoiceMail()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Leave a Voicemail message.
Description
This application allows the calling party to leave a message for the specified list of mailboxes.
When multiple mailboxes are specified, the greeting will be taken from the first mailbox specified.
Dialplan execution will stop if the specified mailbox does not exist.
The Voicemail application will exit if any of the following DTMF digits are received:
Jump to the o extension in the current dialplan context.
Jump to the a extension in the current dialplan context.
This application will set the following channel variable upon completion:
VMSTATUS - This indicates the status of the execution of the VoiceMail application.
SUCCESS
USEREXIT
FAILED
Syntax
VoiceMail(mailbox1[&mailbox2[&...]][,options])
Arguments
mailboxs
mailbox1
mailbox2
options
b - Play the busy greeting to the calling party.
d - Accept digits for a new extension in context c, if played during the greeting. Context defaults to the current context.
c
g - Use the specified amount of gain when recording the voicemail message. The units are whole-number decibels (dB). Only
works on supported technologies, which is DAHDI only.
#
s - Skip the playback of instructions for leaving a message to the calling party.
u - Play the unavailable greeting.
U - Mark message as URGENT.
P - Mark message as PRIORITY.
See Also
Application_VoiceMailMain
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_VoiceMailMain
VoiceMailMain()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Check Voicemail messages.
Description
This application allows the calling party to check voicemail messages. A specific mailbox, and
optional corresponding context, may be specified. If a mailbox is not provided, the calling party
will be prompted to enter one. If a context is not specified, the default context will be used.
The VoiceMailMain application will exit if the following DTMF digit is entered as Mailbox or
Password, and the extension exists:
Jump to the a extension in the current dialplan context.
Syntax
VoiceMailMain([mailbox][@context][,options])
Arguments
mailbox
mailbox
context
options
p - Consider the mailbox parameter as a prefix to the mailbox that is entered by the caller.
g - Use the specified amount of gain when recording a voicemail message. The units are whole-number decibels (dB).
#
s - Skip checking the passcode for the mailbox.
a - Skip folder prompt and go directly to folder specified. Defaults to INBOX (or 0 ).
folder
0 - INBOX
1 - Old
2 - Work
3 - Family
4 - Friends
5 - Cust1
6 - Cust2
7 - Cust3
8 - Cust4
9 - Cust5
0 - INBOX
1 - Old
2 - Work
3 - Family
4 - Friends
5 - Cust1
6 - Cust2
7 - Cust3
8 - Cust4
9 - Cust5
See Also
Application_VoiceMail
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_Wait
Wait()
Synopsis
Waits for some time.
Description
This application waits for a specified number of seconds.
Syntax
Wait(seconds)
Arguments
seconds - Can be passed with fractions of a second. For example, 1.5 will ask the application to wait for 1.5 seconds.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_WaitExten
WaitExten()
Synopsis
Waits for an extension to be entered.
Description
This application waits for the user to enter a new extension for a specified number of seconds.
Use of the application WaitExten within a macro will not function as expected. Please use the
Read application in order to read DTMF from a channel currently executing a macro.
Syntax
WaitExten([seconds[,options]])
Arguments
seconds - Can be passed with fractions of a second. For example, 1.5 will ask the application to wait for 1.5 seconds.
options
m - Provide music on hold to the caller while waiting for an extension.
x - Specify the class for music on hold.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Application_BackGround
Function_TIMEOUT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_WaitForNoise
WaitForNoise()
Synopsis
Waits for a specified amount of noise.
Description
Waits for up to noiserequired milliseconds of noise, iterations times. An optional timeout specified
the number of seconds to return after, even if we do not receive the specified amount of noise.
Use timeout with caution, as it may defeat the purpose of this application, which is to wait
indefinitely until noise is detected on the line.
Syntax
WaitForNoise(noiserequired[,iterations[,timeout]])
Arguments
noiserequired
iterations - If not specified, defaults to 1.
timeout - Is specified only to avoid an infinite loop in cases where silence is never achieved.
See Also
Application_WaitForSilence
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_WaitForRing
WaitForRing()
Synopsis
Wait for Ring Application.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Returns 0 after waiting at least timeout seconds, and only after the next ring has completed.
Returns 0 on success or -1 on hangup.
Syntax
WaitForRing(timeout)
Arguments
timeout
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_WaitForSilence
WaitForSilence()
Synopsis
Waits for a specified amount of silence.
Description
Waits for up to silencerequired milliseconds of silence, iterations times. An optional timeout
specified the number of seconds to return after, even if we do not receive the specified amount of
silence. Use timeout with caution, as it may defeat the purpose of this application, which is to
wait indefinitely until silence is detected on the line. This is particularly useful for
reverse-911-type call broadcast applications where you need to wait for an answering machine to
complete its spiel before playing a message.
Typically you will want to include two or more calls to WaitForSilence when dealing with an
answering machine; first waiting for the spiel to finish, then waiting for the beep, etc.
Examples:
WaitForSilence(500,2) will wait for 1/2 second of silence, twice
WaitForSilence(1000) will wait for 1 second of silence, once
WaitForSilence(300,3,10) will wait for 300ms silence, 3 times, and returns after 10 sec, even if
silence is not detected
Sets the channel variable Sets the channel variable None - WAITSTATUS to one of these values:
WAITSTATUS -
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SILENCE - if exited with silence detected.
TIMEOUT - if exited without silence detected after timeout.
Syntax
WaitForSilence(silencerequired[,iterations[,timeout]])
Arguments
silencerequired
iterations - If not specified, defaults to 1.
timeout - Is specified only to avoid an infinite loop in cases where silence is never achieved.
See Also
Application_WaitForNoise
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_WaitMusicOnHold
WaitMusicOnHold()
Synopsis
Wait, playing Music On Hold.
Description
!!! DEPRECATED. Use MusicOnHold instead !!!
Plays hold music specified number of seconds. Returns 0 when done, or -1 on hangup. If no
hold music is available, the delay will still occur with no sound.
!!! DEPRECATED. Use MusicOnHold instead !!!
Syntax
WaitMusicOnHold(delay)
Arguments
delay
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_WaitUntil
WaitUntil()
Synopsis
Wait (sleep) until the current time is the given epoch.
Description
Waits until the given epoch.
Sets Sets None - WAITUNTILSTATUS to one of the following values:
WAITUNTILSTATUS OK - Wait succeeded.
FAILURE - Invalid argument.
HANGUP - Channel hungup before time elapsed.
PAST - Time specified had already past.
Syntax
WaitUntil(epoch)
Arguments
epoch
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_While
While()
Synopsis
Start a while loop.
Description
Start a While Loop. Execution will return to this point when EndWhile() is called until expr is no
longer true.
Syntax
While(expr)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
expr
See Also
Application_EndWhile
Application_ExitWhile
Application_ContinueWhile
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Application_Zapateller
Zapateller()
Synopsis
Block telemarketers with SIT.
Description
Generates special information tone to block telemarketers from calling you.
This application will set the following channel variable upon completion:
ZAPATELLERSTATUS - This will contain the last action accomplished by the Zapateller application. Possible values include:
NOTHING
ANSWERED
ZAPPED
Syntax
Zapateller(options)
Arguments
options - Comma delimited list of options.
answer - Causes the line to be answered before playing the tone.
nocallerid - Causes Zapateller to only play the tone if there is no callerid information available.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Dialplan Application Template Page
MyApplication()
Synopsys
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
.....
Description
...
Syntax
MyApplication(arg[,something,options])
Arguments
arg
something
options
a
option 'a' is asdfadf
b
option 'b' is asdfasdfadf
c
option 'c' is for cookie
See Also
Dialplan Function Template Page
AGI Command Template Page
AMI Action Template Page
Import Version
This documentation was imported from Asterisk version VERSION STRING HERE.
Dialplan Functions
Dialplan Function Template Page
MY_FUNCTION()
Synopsys
.....
Description
...
Syntax
MY_FUNCTION(arg[,something,options])
Arguments
arg
something
options
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
a
option 'a' is asdfadf
b
option 'b' is asdfasdfadf
c
option 'c' is for cookie
See Also
Dialplan Application Template Page
AGI Command Template Page
AMI Action Template Page
Import Version
This documentation was imported from Asterisk version VERSION STRING HERE.
Function_AES_DECRYPT
AES_DECRYPT()
Synopsis
Decrypt a string encoded in base64 with AES given a 16 character key.
Description
Returns the plain text string.
Syntax
AES_DECRYPT(key,string)
Arguments
key - AES Key
string - Input string.
See Also
Function_AES_ENCRYPT
Function_BASE64_ENCODE
Function_BASE64_DECODE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_AES_ENCRYPT
AES_ENCRYPT()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Encrypt a string with AES given a 16 character key.
Description
Returns an AES encrypted string encoded in base64.
Syntax
AES_ENCRYPT(key,string)
Arguments
key - AES Key
string - Input string
See Also
Function_AES_DECRYPT
Function_BASE64_ENCODE
Function_BASE64_DECODE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_AGC
AGC()
Synopsis
Apply automatic gain control to audio on a channel.
Description
The AGC function will apply automatic gain control to the audio on the channel that it is executed
on. Using rx for audio received and tx for audio transmitted to the channel. When using this
function you set a target audio level. It is primarily intended for use with analog lines, but could
be useful for other channels as well. The target volume is set with a number between 1-32768.
The larger the number the louder (more gain) the channel will receive.
Examples:
exten => 1,1,Set(AGC(rx)=8000)
exten => 1,2,Set(AGC(tx)=off)
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
AGC(channeldirection)
Arguments
channeldirection - This can be either rx or tx
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_AGENT
AGENT()
Synopsis
Gets information about an Agent
Description
Syntax
AGENT(agentid[,item])
Arguments
agentid
item - The valid items to retrieve are:
status - (default) The status of the agent (LOGGEDIN | LOGGEDOUT)
password - The password of the agent
name - The name of the agent
mohclass - MusicOnHold class
channel - The name of the active channel for the Agent (AgentLogin)
fullchannel - The untruncated name of the active channel for the Agent (AgentLogin)
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ARRAY
ARRAY()
Synopsis
Allows setting multiple variables at once.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
The comma-delimited list passed as a value to which the function is set will be interpreted as a
set of values to which the comma-delimited list of variable names in the argument should be set.
Example: Set(ARRAY(var1,var2)=1,2) will set var1 to 1 and var2 to 2
Syntax
ARRAY(var1[,var2[,...][,varN]])
Arguments
var1
var2
varN
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_AST_CONFIG
AST_CONFIG()
Synopsis
Retrieve a variable from a configuration file.
Description
This function reads a variable from an Asterisk configuration file.
Syntax
AST_CONFIG(config_file,category,variable_name)
Arguments
config_file
category
variable_name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_AUDIOHOOK_INHERIT
AUDIOHOOK_INHERIT()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Set whether an audiohook may be inherited to another channel
Description
By enabling audiohook inheritance on the channel, you are giving permission for an audiohook to
be inherited by a descendent channel. Inheritance may be be disabled at any point as well.
Example scenario:
exten => 2000,1,MixMonitor(blah.wav)
exten => 2000,n,Set(AUDIOHOOK_INHERIT(MixMonitor)=yes)
exten => 2000,n,Dial(SIP/2000)
exten => 4000,1,Dial(SIP/4000)
exten => 5000,1,MixMonitor(blah2.wav)
exten => 5000,n,Dial(SIP/5000)
In this basic dialplan scenario, let's consider the following sample calls
Call 1: Caller dials 2000. The person who answers then executes an attended
transfer to 4000.
Result: Since extension 2000 set MixMonitor to be inheritable, after the
transfer to 4000 has completed, the call will continue to be recorded to blah.wav
Call 2: Caller dials 5000. The person who answers then executes an attended
transfer to 4000.
Result: Since extension 5000 did not set MixMonitor to be inheritable, the
recording will stop once the call has been transferred to 4000.
Syntax
AUDIOHOOK_INHERIT(source)
Arguments
source - The built-in sources in Asterisk are Note that the names are not case-sensitive
MixMonitor
Chanspy
Volume
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Volume
Speex
JACK_HOOK
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_BASE64_DECODE
BASE64_DECODE()
Synopsis
Decode a base64 string.
Description
Returns the plain text string.
Syntax
BASE64_DECODE(string)
Arguments
string - Input string.
See Also
Function_BASE64_ENCODE
Function_AES_DECRYPT
Function_AES_ENCRYPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_BASE64_ENCODE
BASE64_ENCODE()
Synopsis
Encode a string in base64.
Description
Returns the base64 string.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
BASE64_ENCODE(string)
Arguments
string - Input string
See Also
Function_BASE64_DECODE
Function_AES_DECRYPT
Function_AES_ENCRYPT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_BLACKLIST
BLACKLIST()
Synopsis
Check if the callerid is on the blacklist.
Description
Uses astdb to check if the Caller*ID is in family blacklist. Returns 1 or 0.
Syntax
BLACKLIST()
Arguments
See Also
Function_DB
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALENDAR_BUSY
CALENDAR_BUSY()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Determine if the calendar is marked busy at this time.
Description
Check the specified calendar's current busy status.
Syntax
CALENDAR_BUSY(calendar)
Arguments
calendar
See Also
Function_CALENDAR_EVENT
Function_CALENDAR_QUERY
Function_CALENDAR_QUERY_RESULT
Function_CALENDAR_WRITE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALENDAR_EVENT
CALENDAR_EVENT()
Synopsis
Get calendar event notification data from a notification call.
Description
Whenever a calendar event notification call is made, the event data may be accessed with this
function.
Syntax
CALENDAR_EVENT(field)
Arguments
field
summary - The VEVENT SUMMARY property or Exchange event 'subject'
description - The text description of the event
organizer - The organizer of the event
location - The location of the eventt
categories - The categories of the event
priority - The priority of the event
calendar - The name of the calendar associated with the event
uid - The unique identifier for this event
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
start - The start time of the event
end - The end time of the event
busystate - The busy state of the event 0=FREE, 1=TENTATIVE, 2=BUSY
See Also
Function_CALENDAR_BUSY
Function_CALENDAR_QUERY
Function_CALENDAR_QUERY_RESULT
Function_CALENDAR_WRITE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALENDAR_QUERY
CALENDAR_QUERY()
Synopsis
Query a calendar server and store the data on a channel
Description
Get a list of events in the currently accessible timeframe of the calendar The function returns the
id for accessing the result with CALENDAR_QUERY_RESULT()
Syntax
CALENDAR_QUERY(calendar[,start[,end]])
Arguments
calendar - The calendar that should be queried
start - The start time of the query (in seconds since epoch)
end - The end time of the query (in seconds since epoch)
See Also
Function_CALENDAR_BUSY
Function_CALENDAR_EVENT
Function_CALENDAR_QUERY_RESULT
Function_CALENDAR_WRITE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALENDAR_QUERY_RESULT
CALENDAR_QUERY_RESULT()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Retrieve data from a previously run CALENDAR_QUERY() call
Description
After running CALENDAR_QUERY and getting a result id, calling CALENDAR_QUERY with that id
and a field will return the data for that field. If multiple events matched the query, and entry is
provided, information from that event will be returned.
Syntax
CALENDAR_QUERY_RESULT(id,field[,entry])
Arguments
id - The query ID returned by CALENDAR_QUERY
field
getnum - number of events occurring during time range
summary - A summary of the event
description - The full event description
organizer - The event organizer
location - The event location
categories - The categories of the event
priority - The priority of the event
calendar - The name of the calendar associted with the event
uid - The unique identifier for the event
start - The start time of the event (in seconds since epoch)
end - The end time of the event (in seconds since epoch)
busystate - The busy status of the event 0=FREE, 1=TENTATIVE, 2=BUSY
entry - Return data from a specific event returned by the query
See Also
Function_CALENDAR_BUSY
Function_CALENDAR_EVENT
Function_CALENDAR_QUERY
Function_CALENDAR_WRITE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALENDAR_WRITE
CALENDAR_WRITE()
Synopsis
Write an event to a calendar
Description
Example: CALENDAR_WRITE(calendar,field1,field2,field3)=val1,val2,val3
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
The field and value arguments can easily be set/passed using the HASHKEYS() and HASH()
functions
Syntax
CALENDAR_WRITE(calendar,field[,...])
Arguments
calendar - The calendar to write to
field
summary - A summary of the event
description - The full event description
organizer - The event organizer
location - The event location
categories - The categories of the event
priority - The priority of the event
uid - The unique identifier for the event
start - The start time of the event (in seconds since epoch)
end - The end time of the event (in seconds since epoch)
busystate - The busy status of the event 0=FREE, 1=TENTATIVE, 2=BUSY
See Also
Function_CALENDAR_BUSY
Function_CALENDAR_EVENT
Function_CALENDAR_QUERY
Function_CALENDAR_QUERY_RESULT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALLCOMPLETION
CALLCOMPLETION()
Synopsis
Get or set a call completion configuration parameter for a channel.
Description
The CALLCOMPLETION function can be used to get or set a call completion configuration
parameter for a channel. Note that setting a configuration parameter will only change the
parameter for the duration of the call. For more information see doc/AST.pdf. For more
information on call completion parameters, see configs/ccss.conf.sample.
Syntax
CALLCOMPLETION(option)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
option - The allowable options are:
cc_agent_policy
cc_monitor_policy
cc_offer_timer
ccnr_available_timer
ccbs_available_timer
cc_recall_timer
cc_max_agents
cc_max_monitors
cc_callback_macro
cc_agent_dialstring
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALLERID
CALLERID()
Synopsis
Gets or sets Caller*ID data on the channel.
Description
Gets or sets Caller*ID data on the channel. Uses channel callerid by default or optional callerid, if
specified.
The allowable values for the name-charset field are the following:
Unknown
ISO8859-1
Withdrawn
ISO8859-2
ISO8859-3
ISO8859-4
ISO8859-5
ISO8859-7
ISO10646 Bmp String
ISO10646 UTF-8 String
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
CALLERID(datatype[,CID])
Arguments
datatype - The allowable datatypes are:
all
name
name-valid
name-charset
name-pres
num
num-valid
num-plan
num-pres
subaddr
subaddr-valid
subaddr-type
subaddr-odd
tag
ANI-all
ANI-name
ANI-name-valid
ANI-name-charset
ANI-name-pres
ANI-num
ANI-num-valid
ANI-num-plan
ANI-num-pres
ANI-tag
RDNIS
DNID
dnid-num-plan
dnid-subaddr
dnid-subaddr-valid
dnid-subaddr-type
dnid-subaddr-odd
CID - Optional Caller*ID
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CALLERPRES
CALLERPRES()
Synopsis
Gets or sets Caller*ID presentation on the channel.
Description
Gets or sets Caller*ID presentation on the channel. This function is deprecated in favor of
CALLERID(num-pres) and CALLERID(name-pres). The following values are valid:
Presentation Allowed, Not Screened.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Presentation Allowed, Passed Screen.
Presentation Allowed, Failed Screen.
Presentation Allowed, Network Number.
Presentation Prohibited, Not Screened.
Presentation Prohibited, Passed Screen.
Presentation Prohibited, Failed Screen.
Presentation Prohibited, Network Number.
Number Unavailable.
Syntax
CALLERPRES()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CDR
CDR()
Synopsis
Gets or sets a CDR variable.
Description
All of the CDR field names are read-only, except for accountcode, userfield, and amaflags
. You may, however, supply a name not on the above list, and create your own variable, whose
value can be changed with this function, and this variable will be stored on the cdr.
For setting CDR values, the For setting CDR values, the l flag does not apply to setting the
accountcode, userfield, or amaflags.
Raw values for disposition :
NO ANSWER
NO ANSWER (NULL record)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
FAILED
BUSY
ANSWERED
Raw values for amaflags :
OMIT
BILLING
DOCUMENTATION
Example: exten => 1,1,Set(CDR(userfield)=test)
Syntax
CDR(name[,options])
Arguments
name - CDR field name:
clid - Caller ID.
lastdata - Last application arguments.
disposition - ANSWERED, NO ANSWER, BUSY, FAILED.
src - Source.
start - Time the call started.
amaflags - DOCUMENTATION, BILL, IGNORE, etc.
dst - Destination.
answer - Time the call was answered.
accountcode - The channel's account code.
dcontext - Destination context.
end - Time the call ended.
uniqueid - The channel's unique id.
dstchannel - Destination channel.
duration - Duration of the call.
userfield - The channel's user specified field.
lastapp - Last application.
billsec - Duration of the call once it was answered.
channel - Channel name.
sequence - CDR sequence number.
options
f - Returns billsec or duration fields as floating point values.
l - Uses the most recent CDR on a channel with multiple records
r - Searches the entire stack of CDRs on the channel.
s - Skips any CDR's that are marked 'LOCKED' due to forkCDR() calls. (on setting/writing CDR vars only)
u - Retrieves the raw, unprocessed value. For example, 'start', 'answer', and 'end' will be retrieved as epoch values, when the u
option is passed, but formatted as YYYY-MM-DD HH:MM:SS otherwise. Similarly, disposition and amaflags will return their raw
integral values.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CHANNEL
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
CHANNEL()
Synopsis
Gets/sets various pieces of information about the channel.
Description
Gets/sets various pieces of information about the channel, additional item may be available from
the channel driver; see its documentation for details. Any item requested that is not available on
the current channel will return an empty string.
Syntax
CHANNEL(item)
Arguments
item - Standard items (provided by all channel technologies) are: chan_sip provides the following additional options: chan_iax2
provides the following additional options: chan_dahdi provides the following additional options:
audioreadformat - R/O format currently being read.
audionativeformat - R/O format used natively for audio.
audiowriteformat - R/O format currently being written.
callgroup - R/W call groups for call pickup.
channeltype - R/O technology used for channel.
checkhangup - R/O Whether the channel is hanging up (1/0)
language - R/W language for sounds played.
musicclass - R/W class (from musiconhold.conf) for hold music.
name - The name of the channel
parkinglot - R/W parkinglot for parking.
rxgain - R/W set rxgain level on channel drivers that support it.
secure_bridge_signaling - Whether or not channels bridged to this channel require secure signaling
secure_bridge_media - Whether or not channels bridged to this channel require secure media
state - R/O state for channel
tonezone - R/W zone for indications played
transfercapability - R/W ISDN Transfer Capability, one of:
SPEECH
DIGITAL
RESTRICTED_DIGITAL
3K1AUDIO
DIGITAL_W_TONES
VIDEO
txgain - R/W set txgain level on channel drivers that support it.
videonativeformat - R/O format used natively for video
trace - R/W whether or not context tracing is enabled, only available if CHANNEL_TRACE is defined.
peerip - R/O Get the IP address of the peer.
recvip - R/O Get the source IP address of the peer.
from - R/O Get the URI from the From: header.
uri - R/O Get the URI from the Contact: header.
useragent - R/O Get the useragent.
peername - R/O Get the name of the peer.
t38passthrough - R/O 1 if T38 is offered or enabled in this channel, otherwise 0
rtpqos - R/O Get QOS information about the RTP stream This option takes two additional arguments: Argument 1:
audio Get data about the audio stream video Get data about the video stream text Get data about the text stream Argument
2:
local_ssrc Local SSRC (stream ID) local_lostpackets Local lost packets local_jitter Local calculated jitter
local_maxjitter Local calculated jitter (maximum) local_minjitter Local calculated jitter (minimum)
local_normdevjitter Local calculated jitter (normal deviation) local_stdevjitter Local calculated jitter (standard
deviation) local_count Number of received packets remote_ssrc Remote SSRC (stream ID) remote_lostpackets
Remote lost packets remote_jitter Remote reported jitter remote_maxjitter Remote calculated jitter (maximum)
remote_minjitter Remote calculated jitter (minimum) remote_normdevjitter Remote calculated jitter (normal deviation)
remote_stdevjitter Remote calculated jitter (standard deviation) remote_count Number of transmitted packets rtt
Round trip time maxrtt Round trip time (maximum) minrtt Round trip time (minimum) normdevrtt Round trip time (normal
deviation) stdevrtt Round trip time (standard deviation) all All statistics (in a form suited to logging, but not for parsing)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
rtpdest - R/O Get remote RTP destination information. This option takes one additional argument: Argument 1:
audio Get audio destination video Get video destination text Get text destination
dahdi_channel - R/O DAHDI channel related to this channel.
dahdi_span - R/O DAHDI span related to this channel.
dahdi_type - R/O DAHDI channel type, one of:
analog
mfc/r2
pri
pseudo
ss7
keypad_digits - R/O PRI Keypad digits that came in with the SETUP message.
reversecharge - R/O PRI Reverse Charging Indication, one of:
-1 - None
{{ 1}} - Reverse Charging Requested
no_media_path - R/O PRI Nonzero if the channel has no B channel. The channel is either on hold or a call waiting call.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r314358.
Function_CHANNELS
CHANNELS()
Synopsis
Gets the list of channels, optionally filtering by a regular expression.
Description
Gets the list of channels, optionally filtering by a regular_expression. If no argument is provided,
all known channels are returned. The regular_expression must correspond to the POSIX.2
specification, as shown in regex(7). The list returned will be space-delimited.
Syntax
CHANNELS([regular_expression])
Arguments
regular_expression
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CHECKSIPDOMAIN
CHECKSIPDOMAIN()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Checks if domain is a local domain.
Description
This function checks if the domain in the argument is configured as a local SIP domain that this
Asterisk server is configured to handle. Returns the domain name if it is locally handled,
otherwise an empty string. Check the domain= configuration in sip.conf.
Syntax
CHECKSIPDOMAIN(domain)
Arguments
domain
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CONNECTEDLINE
CONNECTEDLINE()
Synopsis
Gets or sets Connected Line data on the channel.
Description
Gets or sets Connected Line data on the channel.
The allowable values for the name-charset field are the following:
Unknown
ISO8859-1
Withdrawn
ISO8859-2
ISO8859-3
ISO8859-4
ISO8859-5
ISO8859-7
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ISO10646 Bmp String
ISO10646 UTF-8 String
Syntax
CONNECTEDLINE(datatype[,i])
Arguments
datatype - The allowable datatypes are:
all
name
name-valid
name-charset
name-pres
num
num-valid
num-plan
num-pres
subaddr
subaddr-valid
subaddr-type
subaddr-odd
tag
i - If set, this will prevent the channel from sending out protocol messages because of the value being set
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CSV_QUOTE
CSV_QUOTE()
Synopsis
Quotes a given string for use in a CSV file, escaping embedded quotes as necessary
Description
Example: ${CSV_QUOTE("a,b" 123)} will return """a,b"" 123"
Syntax
CSV_QUOTE(string)
Arguments
string
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_CUT
CUT()
Synopsis
Slices and dices strings, based upon a named delimiter.
Description
Cut out information from a string ( varname ), based upon a named delimiter.
Syntax
CUT(varname,char-delim,range-spec)
Arguments
varname - Variable you want cut
char-delim - Delimiter, defaults to range-spec - Number of the field you want (1-based offset), may also be specified as a range (with - ) or group of ranges and fields
(with & )
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DB
DB()
Synopsis
Read from or write to the Asterisk database.
Description
This function will read from or write a value to the Asterisk database. On a read, this function
returns the corresponding value from the database, or blank if it does not exist. Reading a
database value will also set the variable DB_RESULT. If you wish to find out if an entry exists,
use the DB_EXISTS function.
Syntax
DB(family,key)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
family
key
See Also
Application_DBdel
Function_DB_DELETE
Application_DBdeltree
Function_DB_EXISTS
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DB_DELETE
DB_DELETE()
Synopsis
Return a value from the database and delete it.
Description
This function will retrieve a value from the Asterisk database and then remove that key from the
database. This function will retrieve a value from the Asterisk database and then remove that key
from the database. None - DB_RESULT will be set to the key's value if it exists.
Syntax
DB_DELETE(family,key)
Arguments
family
key
See Also
Application_DBdel
Function_DB
Application_DBdeltree
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DB_EXISTS
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
DB_EXISTS()
Synopsis
Check to see if a key exists in the Asterisk database.
Description
This function will check to see if a key exists in the Asterisk database. If it exists, the function will
return 1. If not, it will return 0. Checking for existence of a database key will also set the variable
DB_RESULT to the key's value if it exists.
Syntax
DB_EXISTS(family,key)
Arguments
family
key
See Also
Function_DB
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DEC
DEC()
Synopsis
Decrements the value of a variable, while returning the updated value to the dialplan
Description
Decrements the value of a variable, while returning the updated value to the dialplan
Example: DEC(MyVAR) - Increments MyVar
Note: DEC(${MyVAR}) - Is wrong, as INC expects the variable name, not its value
Syntax
DEC(variable)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
variable - The variable name to be manipulated, without the braces.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DENOISE
DENOISE()
Synopsis
Apply noise reduction to audio on a channel.
Description
The DENOISE function will apply noise reduction to audio on the channel that it is executed on. It
is very useful for noisy analog lines, especially when adjusting gains or using AGC. Use rx for
audio received from the channel and tx to apply the filter to the audio being sent to the channel.
Examples:
exten => 1,1,Set(DENOISE(rx)=on)
exten => 1,2,Set(DENOISE(tx)=off)
Syntax
DENOISE(channeldirection)
Arguments
channeldirection - This can be either rx or tx the values that can be set to this are either on and off
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DEVICE_STATE
DEVICE_STATE()
Synopsis
Get or Set a device state.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
The DEVICE_STATE function can be used to retrieve the device state from any device state
provider. For example:
NoOp(SIP/mypeer has state ${DEVICE_STATE(SIP/mypeer)})
NoOp(Conference number 1234 has state ${DEVICE_STATE(MeetMe:1234)})
The DEVICE_STATE function can also be used to set custom device state from the dialplan. The
Custom: prefix must be used. For example:
Set(DEVICE_STATE(Custom:lamp1)=BUSY)
Set(DEVICE_STATE(Custom:lamp2)=NOT_INUSE)
You can subscribe to the status of a custom device state using a hint in the dialplan:
exten => 1234,hint,Custom:lamp1
The possible values for both uses of this function are:
UNKNOWN | NOT_INUSE | INUSE | BUSY | INVALID | UNAVAILABLE | RINGING |
RINGINUSE | ONHOLD
Syntax
DEVICE_STATE(device)
Arguments
device
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DIALGROUP
DIALGROUP()
Synopsis
Manages a group of users for dialing.
Description
Presents an interface meant to be used in concert with the Dial application, by presenting a list of
channels which should be dialled when referenced.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
When DIALGROUP is read from, the argument is interpreted as the particular group for which a
dial should be attempted. When DIALGROUP is written to with no arguments, the entire list is
replaced with the argument specified.
Functionality is similar to a queue, except that when no interfaces are available, execution may
continue in the dialplan. This is useful when you want certain people to be the first to answer any
calls, with immediate fallback to a queue when the front line people are busy or unavailable, but
you still want front line people to log in and out of that group, just like a queue.
Example:
exten => 1,1,Set(DIALGROUP(mygroup,add)=SIP/10)
exten => 1,n,Set(DIALGROUP(mygroup,add)=SIP/20)
exten => 1,n,Dial(${DIALGROUP(mygroup)})
Syntax
DIALGROUP(group[,op])
Arguments
group
op - The operation name, possible values are:
add - add a channel name or interface (write-only) del - remove a channel name or interface (write-only)
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DIALPLAN_EXISTS
DIALPLAN_EXISTS()
Synopsis
Checks the existence of a dialplan target.
Description
This function returns 1 if the target exits. Otherwise, it returns 0.
Syntax
DIALPLAN_EXISTS(context[,extension[,priority]])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
context
extension
priority
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DUNDILOOKUP
DUNDILOOKUP()
Synopsis
Do a DUNDi lookup of a phone number.
Description
This will do a DUNDi lookup of the given phone number.
This function will return the Technology/Resource found in the first result in the DUNDi lookup. If
no results were found, the result will be blank.
Syntax
DUNDILOOKUP(number[,context[,options]])
Arguments
number
context - If not specified the default will be e164.
options
b - Bypass the internal DUNDi cache
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DUNDIQUERY
DUNDIQUERY()
Synopsis
Initiate a DUNDi query.
Description
This will do a DUNDi lookup of the given phone number.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
The result of this function will be a numeric ID that can be used to retrieve the results with the
DUNDIRESULT function.
Syntax
DUNDIQUERY(number[,context[,options]])
Arguments
number
context - If not specified the default will be e164.
options
b - Bypass the internal DUNDi cache
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_DUNDIRESULT
DUNDIRESULT()
Synopsis
Retrieve results from a DUNDIQUERY.
Description
This function will retrieve results from a previous use\n" of the DUNDIQUERY function.
Syntax
DUNDIRESULT(id[,resultnum])
Arguments
id - The identifier returned by the DUNDIQUERY function.
resultnum
number - The number of the result that you want to retrieve, this starts at 1
getnum - The total number of results that are available.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ENUMLOOKUP
ENUMLOOKUP()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
General or specific querying of NAPTR records for ENUM or ENUM-like DNS pointers.
Description
For more information see doc/AST.pdf.
Syntax
ENUMLOOKUP(number[,method-type[,options[,record#[,zone-suffix]]]])
Arguments
number
method-type - If no method-type is given, the default will be sip.
options
c - Returns an integer count of the number of NAPTRs of a certain RR type. Combination of c and Method-type of ALL will return
a count of all NAPTRs for the record.
u - Returns the full URI and does not strip off the URI-scheme.
s - Triggers ISN specific rewriting.
i - Looks for branches into an Infrastructure ENUM tree.
d - for a direct DNS lookup without any flipping of digits.
record# - If no record# is given, defaults to 1.
zone-suffix - If no zone-suffix is given, the default will be e164.arpa
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ENUMQUERY
ENUMQUERY()
Synopsis
Initiate an ENUM query.
Description
This will do a ENUM lookup of the given phone number.
Syntax
ENUMQUERY(number[,method-type[,zone-suffix]])
Arguments
number
method-type - If no method-type is given, the default will be sip.
zone-suffix - If no zone-suffix is given, the default will be e164.arpa
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ENUMRESULT
ENUMRESULT()
Synopsis
Retrieve results from a ENUMQUERY.
Description
This function will retrieve results from a previous use of the ENUMQUERY function.
Syntax
ENUMRESULT(id,resultnum)
Arguments
id - The identifier returned by the ENUMQUERY function.
resultnum - The number of the result that you want to retrieve. Results start at 1. If this argument is specified as getnum, then it will
return the total number of results that are available.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ENV
ENV()
Synopsis
Gets or sets the environment variable specified.
Description
Variables starting with AST_ are reserved to the system and may not be set.
Syntax
ENV(varname)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
varname - Environment variable name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_EVAL
EVAL()
Synopsis
Evaluate stored variables
Description
Using EVAL basically causes a string to be evaluated twice. When a variable or expression is in
the dialplan, it will be evaluated at runtime. However, if the results of the evaluation is in fact
another variable or expression, using EVAL will have it evaluated a second time.
Example: If the Example: If the None - MYVAR contains Example: If the None - OTHERVAR, then
the result of ${EVAL( Example: If the None - MYVAR )} in the dialplan will be the contents of
Example: If the None - OTHERVAR. Normally just putting Example: If the None - MYVAR in the
dialplan the result would be Example: If the None - OTHERVAR.
Syntax
EVAL(variable)
Arguments
variable
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_EXCEPTION
EXCEPTION()
Synopsis
Retrieve the details of the current dialplan exception.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Retrieve the details (specified field ) of the current dialplan exception.
Syntax
EXCEPTION(field)
Arguments
field - The following fields are available for retrieval:
reason - INVALID, ERROR, RESPONSETIMEOUT, ABSOLUTETIMEOUT, or custom value set by the RaiseException()
application
context - The context executing when the exception occurred.
exten - The extension executing when the exception occurred.
priority - The numeric priority executing when the exception occurred.
See Also
Application_RaiseException
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_EXISTS
EXISTS()
Synopsis
Test the existence of a value.
Description
Returns 1 if exists, 0 otherwise.
Syntax
EXISTS(data)
Arguments
data
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_EXTENSION_STATE
EXTENSION_STATE()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Get an extension's state.
Description
The EXTENSION_STATE function can be used to retrieve the state from any hinted extension.
For example:
NoOp(1234@default has state ${EXTENSION_STATE(1234)})
NoOp(4567@home has state ${EXTENSION_STATE(4567@home)})
The possible values returned by this function are:
UNKNOWN | NOT_INUSE | INUSE | BUSY | INVALID | UNAVAILABLE | RINGING |
RINGINUSE | HOLDINUSE | ONHOLD
Syntax
EXTENSION_STATE(extension[,context])
Arguments
extension
context - If it is not specified defaults to default.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FAXOPT
FAXOPT()
Synopsis
Gets/sets various pieces of information about a fax session.
Description
FAXOPT can be used to override the settings for a FAX session listed in res_fax.conf, it can
also be used to retreive information about a FAX session that has finished eg. pages/status.
Syntax
FAXOPT(item)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
item
ecm - R/W Error Correction Mode (ECM) enable with 'yes', disable with 'no'.
error - R/O FAX transmission error code upon failure.
filename - R/O Filename of the first file of the FAX transmission.
filenames - R/O Filenames of all of the files in the FAX transmission (comma separated).
headerinfo - R/W FAX header information.
localstationid - R/W Local Station Identification.
minrate - R/W Minimum transfer rate set before transmission.
maxrate - R/W Maximum transfer rate set before transmission.
modem - R/W Modem type (v17/v27/v29).
pages - R/O Number of pages transferred.
rate - R/O Negotiated transmission rate.
remotestationid - R/O Remote Station Identification after transmission.
resolution - R/O Negotiated image resolution after transmission.
sessionid - R/O Session ID of the FAX transmission.
status - R/O Result Status of the FAX transmission.
statusstr - R/O Verbose Result Status of the FAX transmission.
See Also
Application_ReceiveFax
Application_SendFax
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FIELDNUM
FIELDNUM()
Synopsis
Return the 1-based offset of a field in a list
Description
Search the variable named varname for the string value delimited by delim and return a 1-based
offset as to its location. If not found or an error occured, return 0.
The delimiter may be specified as a special or extended ASCII character, by encoding it. The
characters \n, \r, and \t are all recognized as the newline, carriage return, and tab characters,
respectively. Also, octal and hexadecimal specifications are recognized by the patterns \0nnn
and \xHH, respectively. For example, if you wanted to encode a comma as the delimiter, you
could use either \054 or \x2C.
Example: If ${example} contains ex-amp-le, then ${FIELDNUM(example,-,amp)} returns 2.
Syntax
FIELDNUM(varname,delim,value)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
varname
delim
value
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FIELDQTY
FIELDQTY()
Synopsis
Count the fields with an arbitrary delimiter
Description
The delimiter may be specified as a special or extended ASCII character, by encoding it. The
characters \n, \r, and \t are all recognized as the newline, carriage return, and tab characters,
respectively. Also, octal and hexadecimal specifications are recognized by the patterns \0nnn
and \xHH, respectively. For example, if you wanted to encode a comma as the delimiter, you
could use either \054 or \x2C.
Example: If ${example} contains ex-amp-le, then ${FIELDQTY(example,-)} returns 3.
Syntax
FIELDQTY(varname,delim)
Arguments
varname
delim
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FILE
FILE()
Synopsis
Read or write text file.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Read and write text file in character and line mode.
Examples:
Read mode (byte):
;reads the entire content of the file.
Set(foo=${FILE(/tmp/test.txt)})
;reads from the 11th byte to the end of the file (i.e. skips the first 10).
Set(foo=${FILE(/tmp/test.txt,10)})
;reads from the 11th to 20th byte in the file (i.e. skip the first 10, then read 10 bytes).
Set(foo=${FILE(/tmp/test.txt,10,10)})
Read mode (line):
; reads the 3rd line of the file.
Set(foo=${FILE(/tmp/test.txt,3,1,l)})
; reads the 3rd and 4th lines of the file.
Set(foo=${FILE(/tmp/test.txt,3,2,l)})
; reads from the third line to the end of the file.
Set(foo=${FILE(/tmp/test.txt,3,,l)})
; reads the last three lines of the file.
Set(foo=${FILE(/tmp/test.txt,-3,,l)})
; reads the 3rd line of a DOS-formatted file.
Set(foo=${FILE(/tmp/test.txt,3,1,l,d)})
Write mode (byte):
; truncate the file and write "bar"
Set(FILE(/tmp/test.txt)=bar)
; Append "bar"
Set(FILE(/tmp/test.txt,,,a)=bar)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
; Replace the first byte with "bar" (replaces 1 character with 3)
Set(FILE(/tmp/test.txt,0,1)=bar)
; Replace 10 bytes beginning at the 21st byte of the file with "bar"
Set(FILE(/tmp/test.txt,20,10)=bar)
; Replace all bytes from the 21st with "bar"
Set(FILE(/tmp/test.txt,20)=bar)
; Insert "bar" after the 4th character
Set(FILE(/tmp/test.txt,4,0)=bar)
Write mode (line):
; Replace the first line of the file with "bar"
Set(FILE(/tmp/foo.txt,0,1,l)=bar)
; Replace the last line of the file with "bar"
Set(FILE(/tmp/foo.txt,-1,,l)=bar)
; Append "bar" to the file with a newline
Set(FILE(/tmp/foo.txt,,,al)=bar)
Syntax
FILE(filename[,offset[,length[,options[,format]]]])
Arguments
filename
offset - Maybe specified as any number. If negative, offset specifies the number of bytes back from the end of the file.
length - If specified, will limit the length of the data read to that size. If negative, trims length bytes from the end of the file.
options
l - Line mode: offset and length are assumed to be measured in lines, instead of byte offsets.
a - In write mode only, the append option is used to append to the end of the file, instead of overwriting the existing file.
d - In write mode and line mode only, this option does not automatically append a newline string to the end of a value. This is
useful for deleting lines, instead of setting them to blank.
format - The format parameter may be used to delimit the type of line terminators in line mode.
u - Unix newline format.
d - DOS newline format.
m - Macintosh newline format.
See Also
Function_FILE_COUNT_LINE
Function_FILE_FORMAT
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FILE_COUNT_LINE
FILE_COUNT_LINE()
Synopsis
Obtains the number of lines of a text file.
Description
Returns the number of lines, or -1 on error.
Syntax
FILE_COUNT_LINE(filename[,format])
Arguments
filename
format - Format may be one of the following: If not specified, an attempt will be made to determine the newline format type.If not
specified, an attempt will be made to determine the newline format type.
u - Unix newline format.
d - DOS newline format.
m - Macintosh newline format.
See Also
Function_FILE
Function_FILE_FORMAT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FILE_FORMAT
FILE_FORMAT()
Synopsis
Return the newline format of a text file.
Description
Return the line terminator type:
'u' - Unix "\n" format
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
'd' - DOS "\r\n" format
'm' - Macintosh "\r" format
'x' - Cannot be determined
Syntax
FILE_FORMAT(filename)
Arguments
filename
See Also
Function_FILE
Function_FILE_COUNT_LINE
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FILTER
FILTER()
Synopsis
Filter the string to include only the allowed characters
Description
Permits all characters listed in allowed-chars, filtering all others outs. In addition to literally listing
the characters, you may also use ranges of characters (delimited by a Hexadecimal characters started with a \x (i.e. \x20)
Octal characters started with a \0 (i.e. \040)
Also \t, \n and \r are recognized.
If you want the If you want the - character it needs to be prefixed with a {{}}
Syntax
FILTER(allowed-chars,string)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
allowed-chars
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_FRAME_TRACE
FRAME_TRACE()
Synopsis
View internal ast_frames as they are read and written on a channel.
Description
Examples:
exten => 1,1,Set(FRAME_TRACE(white)=DTMF_BEGIN,DTMF_END); view only DTMF frames.
exten => 1,1,Set(FRAME_TRACE()=DTMF_BEGIN,DTMF_END); view only DTMF frames.
exten => 1,1,Set(FRAME_TRACE(black)=DTMF_BEGIN,DTMF_END); view everything except
DTMF frames.
Syntax
FRAME_TRACE(filter list type)
Arguments
filter list type - A filter can be applied to the trace to limit what frames are viewed. This filter can either be a white or black list
of frame types. When no filter type is present, white is used. If no arguments are provided at all, all frames will be output. Below are the
different types of frames that can be filtered.
DTMF_BEGIN
DTMF_END
VOICE
VIDEO
CONTROL
NULL
IAX
TEXT
IMAGE
HTML
CNG
MODEM
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_GLOBAL
GLOBAL()
Synopsis
Gets or sets the global variable specified.
Description
Set or get the value of a global variable specified in varname
Syntax
GLOBAL(varname)
Arguments
varname - Global variable name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_GROUP
GROUP()
Synopsis
Gets or sets the channel group.
Description
category can be employed for more fine grained group management. Each channel can only be
member of exactly one group per category.
Syntax
GROUP([category])
Arguments
category - Category name.
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_GROUP_COUNT
GROUP_COUNT()
Synopsis
Counts the number of channels in the specified group.
Description
Calculates the group count for the specified group, or uses the channel's current group if not
specifed (and non-empty).
Syntax
GROUP_COUNT([groupname[,category]])
Arguments
groupname - Group name.
category - Category name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_GROUP_LIST
GROUP_LIST()
Synopsis
Gets a list of the groups set on a channel.
Description
Gets a list of the groups set on a channel.
Syntax
GROUP_LIST()
Arguments
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_GROUP_MATCH_COUNT
GROUP_MATCH_COUNT()
Synopsis
Counts the number of channels in the groups matching the specified pattern.
Description
Calculates the group count for all groups that match the specified pattern. Note: category
matching is applied after matching based on group. Uses standard regular expression matching
on both (see regex(7)).
Syntax
GROUP_MATCH_COUNT(groupmatch[,category])
Arguments
groupmatch - A standard regular expression used to match a group name.
category - A standard regular expression used to match a category name.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_HASH
HASH()
Synopsis
Implementation of a dialplan associative array
Description
In two arguments mode, gets and sets values to corresponding keys within a named associative
array. The single-argument mode will only work when assigned to from a function defined by
func_odbc
Syntax
HASH(hashname[,hashkey])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
hashname
hashkey
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_HASHKEYS
HASHKEYS()
Synopsis
Retrieve the keys of the HASH() function.
Description
Returns a comma-delimited list of the current keys of the associative array defined by the
HASH() function. Note that if you iterate over the keys of the result, adding keys during iteration
will cause the result of the HASHKEYS() function to change.
Syntax
HASHKEYS(hashname)
Arguments
hashname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_HINT
HINT()
Synopsis
Get the devices set for a dialplan hint.
Description
The HINT function can be used to retrieve the list of devices that are mapped to a dialplan hint.
For example:
NoOp(Hint for Extension 1234 is ${HINT(1234)})
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
HINT(extension[@context][,options])
Arguments
extension
extension
context
options
n - Retrieve name on the hint instead of list of devices.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_IAXPEER
IAXPEER()
Synopsis
Gets IAX peer information.
Description
Syntax
IAXPEER(peername[,item])
Arguments
peername
CURRENTCHANNEL - If peername is specified to this value, return the IP address of the endpoint of the current channel
item - If peername is specified, valid items are:
ip - (default) The IP address.
status - The peer's status (if qualify=yes )
mailbox - The configured mailbox.
context - The configured context.
expire - The epoch time of the next expire.
dynamic - Is it dynamic? (yes/no).
callerid_name - The configured Caller ID name.
callerid_num - The configured Caller ID number.
codecs - The configured codecs.
codecx - Preferred codec index number x (beginning with 0 )
See Also
Function_SIPPEER
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_IAXVAR
IAXVAR()
Synopsis
Sets or retrieves a remote variable.
Description
Syntax
IAXVAR(varname)
Arguments
varname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ICONV
ICONV()
Synopsis
Converts charsets of strings.
Description
Converts string from in-charset into out-charset. For available charsets, use iconv -l on your
shell command line.
Due to limitations within the API, ICONV will not currently work with charsets with embedded
NULLs. If found, the string will terminate.Due to limitations within the API, ICONV will not
currently work with charsets with embedded NULLs. If found, the string will terminate.
Syntax
ICONV(in-charset,out-charset,string)
Arguments
in-charset - Input charset
out-charset - Output charset
string - String to convert, from in-charset to out-charset
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_IF
IF()
Synopsis
Check for an expresion.
Description
Returns the data following ? if true, else the data following :
Syntax
IF(expresion?[true][:false])
Arguments
expresion
retvalue
true
false
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_IFMODULE
IFMODULE()
Synopsis
Checks if an Asterisk module is loaded in memory.
Description
Checks if a module is loaded. Use the full module name as shown by the list in module list.
Returns 1 if module exists in memory, otherwise 0
Syntax
IFMODULE(modulename.so)
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Arguments
modulename.so - Module name complete with .so
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_IFTIME
IFTIME()
Synopsis
Temporal Conditional.
Description
Returns the data following ? if true, else the data following :
Syntax
IFTIME(timespec?[true][:false])
Arguments
timespec
retvalue
true
false
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_IMPORT
IMPORT()
Synopsis
Retrieve the value of a variable from another channel.
Description
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
IMPORT(channel,variable)
Arguments
channel
variable
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_INC
INC()
Synopsis
Increments the value of a variable, while returning the updated value to the dialplan
Description
Increments the value of a variable, while returning the updated value to the dialplan
Example: INC(MyVAR) - Increments MyVar
Note: INC(${MyVAR}) - Is wrong, as INC expects the variable name, not its value
Syntax
INC(variable)
Arguments
variable - The variable name to be manipulated, without the braces.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ISNULL
ISNULL()
Synopsis
Check if a value is NULL.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Returns 1 if NULL or 0 otherwise.
Syntax
ISNULL(data)
Arguments
data
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_JABBER_RECEIVE
JABBER_RECEIVE()
Synopsis
Reads XMPP messages.
Description
Receives a text message on the given account from the buddy identified by jid and returns the
contents.
Example: ${JABBER_RECEIVE(asterisk,bob@domain.com)} returns an XMPP message sent
from bob@domain.com (or nothing in case of a time out), to the asterisk XMPP account
configured in jabber.conf.
Syntax
JABBER_RECEIVE(account,jid[,timeout])
Arguments
account - The local named account to listen on (specified in jabber.conf)
jid - Jabber ID of the buddy to receive message from. It can be a bare JID (username@domain) or a full JID
(username@domain/resource).
timeout - In seconds, defaults to 20.
See Also
Function_JABBER_STATUS
Application_JabberSend
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_JABBER_STATUS
JABBER_STATUS()
Synopsis
Retrieves a buddy's status.
Description
Retrieves the numeric status associated with the buddy identified by jid. If the buddy does not
exist in the buddylist, returns 7.
Status will be 1-7.
1=Online, 2=Chatty, 3=Away, 4=XAway, 5=DND, 6=Offline
If not in roster variable will be set to 7.
Example: ${JABBER_STATUS(asterisk,bob@domain.com)} returns 1 if bob@domain.com is
online. asterisk is the associated XMPP account configured in jabber.conf.
Syntax
JABBER_STATUS(account,jid)
Arguments
account - The local named account to listen on (specified in jabber.conf)
jid - Jabber ID of the buddy to receive message from. It can be a bare JID (username@domain) or a full JID
(username@domain/resource).
See Also
Function_JABBER_RECEIVE
Application_JabberSend
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_KEYPADHASH
KEYPADHASH()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Hash the letters in string into equivalent keypad numbers.
Description
Example: ${KEYPADHASH(Les)} returns "537"
Syntax
KEYPADHASH(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_LEN
LEN()
Synopsis
Return the length of the string given.
Description
Example: ${LEN(example)} returns 7
Syntax
LEN(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_LISTFILTER
LISTFILTER()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Remove an item from a list, by name.
Description
Remove value from the list contained in the varname variable, where the list delimiter is specified
by the delim parameter. This is very useful for removing a single channel name from a list of
channels, for example.
Syntax
LISTFILTER(varname,delim,value)
Arguments
varname
delim
value
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_LOCAL
LOCAL()
Synopsis
Manage variables local to the gosub stack frame.
Description
Read and write a variable local to the gosub stack frame, once we Return() it will be lost (or it will
go back to whatever value it had before the Gosub()).
Syntax
LOCAL(varname)
Arguments
varname
See Also
Application_Gosub
Application_GosubIf
Application_Return
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_LOCAL_PEEK
LOCAL_PEEK()
Synopsis
Retrieve variables hidden by the local gosub stack frame.
Description
Read a variable varname hidden by n levels of gosub stack frames. Note that
${LOCAL_PEEK(0,foo)} is the same as Read a variable None - foo, since the value of n peeks
under 0 levels of stack frames; in other words, 0 is the current level. If n exceeds the available
number of stack frames, then an empty string is returned.
Syntax
LOCAL_PEEK(n,varname)
Arguments
n
varname
See Also
Application_Gosub
Application_GosubIf
Application_Return
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_LOCK
LOCK()
Synopsis
Attempt to obtain a named mutex.
Description
Attempts to grab a named lock exclusively, and prevents other channels from obtaining the same
lock. LOCK will wait for the lock to become available. Returns 1 if the lock was obtained or 0 on
error.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
To avoid the possibility of a deadlock, LOCK will only attempt to obtain the lock for 3 seconds if
the channel already has another lock.To avoid the possibility of a deadlock, LOCK will only
attempt to obtain the lock for 3 seconds if the channel already has another lock.
Syntax
LOCK(lockname)
Arguments
lockname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MAILBOX_EXISTS
MAILBOX_EXISTS()
Synopsis
Tell if a mailbox is configured.
Description
Returns a boolean of whether the corresponding mailbox exists. If context is not specified,
defaults to the default context.
Syntax
MAILBOX_EXISTS(mailbox[,context])
Arguments
mailbox
context
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MASTER_CHANNEL
MASTER_CHANNEL()
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Synopsis
Gets or sets variables on the master channel
Description
Allows access to the channel which created the current channel, if any. If the channel is already
a master channel, then accesses local channel variables.
Syntax
MASTER_CHANNEL()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MATH
MATH()
Synopsis
Performs Mathematical Functions.
Description
Performs mathematical functions based on two parameters and an operator. The returned value
type is type
Example: Set(i=${MATH(123%16,int)}) - sets var i=11
Syntax
MATH(expression[,type])
Arguments
expression - Is of the form: number1 op number2 where the possible values for op are:
+,-,/,*,%,<<,>>,^,AND,OR,XOR,<,%gt;,>=,<=,== (and behave as their C equivalents)
type - Wanted type of result: f, float - float(default) i, int - integer h, hex - hex c, char - char
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_MD5
MD5()
Synopsis
Computes an MD5 digest.
Description
Computes an MD5 digest.
Syntax
MD5(data)
Arguments
data
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MEETME_INFO
MEETME_INFO()
Synopsis
Query a given conference of various properties.
Description
Syntax
MEETME_INFO(keyword,confno)
Arguments
keyword - Options:
lock - Boolean of whether the corresponding conference is locked.
parties - Number of parties in a given conference
activity - Duration of conference in seconds.
dynamic - Boolean of whether the corresponding conference is dynamic.
confno - Conference number to retrieve information from.
See Also
Application_MeetMe
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_MeetMeCount
Application_MeetMeAdmin
Application_MeetMeChannelAdmin
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MINIVMACCOUNT
MINIVMACCOUNT()
Synopsis
Gets MiniVoicemail account information.
Description
Syntax
MINIVMACCOUNT(account,item)
Arguments
account
item - Valid items are:
path - Path to account mailbox (if account exists, otherwise temporary mailbox).
hasaccount - 1 is static Minivm account exists, 0 otherwise.
fullname - Full name of account owner.
email - Email address used for account.
etemplate - Email template for account (default template if none is configured).
ptemplate - Pager template for account (default template if none is configured).
accountcode - Account code for the voicemail account.
pincode - Pin code for voicemail account.
timezone - Time zone for voicemail account.
language - Language for voicemail account.
<channel variable name> - Channel variable value (set in configuration for account).
See Also
Application_MinivmRecord
Application_MinivmGreet
Application_MinivmNotify
Application_MinivmDelete
Application_MinivmAccMess
Application_MinivmMWI
Function_MINIVMCOUNTER
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MINIVMCOUNTER
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MINIVMCOUNTER()
Synopsis
Reads or sets counters for MiniVoicemail message.
Description
The operation is atomic and the counter is locked while changing the value. The counters are
stored as text files in the minivm account directories. It might be better to use realtime functions if
you are using a database to operate your Asterisk.
Syntax
MINIVMCOUNTER(account,name[,operand])
Arguments
account - If account is given and it exists, the counter is specific for the account. If account is a domain and the domain directory exists,
counters are specific for a domain.
name - The name of the counter is a string, up to 10 characters.
operand - The counters never goes below zero. Valid operands for changing the value of a counter when assigning a value are:
i - Increment by value.
d - Decrement by value.
s - Set to value.
See Also
Application_MinivmRecord
Application_MinivmGreet
Application_MinivmNotify
Application_MinivmDelete
Application_MinivmAccMess
Application_MinivmMWI
Function_MINIVMACCOUNT
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_MUTEAUDIO
MUTEAUDIO()
Synopsis
Muting audio streams in the channel
Description
The MUTEAUDIO function can be used to mute inbound (to the PBX) or outbound audio in a call.
Example:
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
MUTEAUDIO(in)=on MUTEAUDIO(in)=off
Syntax
MUTEAUDIO(direction)
Arguments
direction - Must be one of
in - Inbound stream (to the PBX)
out - Outbound stream (from the PBX)
all - Both streams
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_ODBC
ODBC()
Synopsis
Controls ODBC transaction properties.
Description
The ODBC() function allows setting several properties to influence how a connected database
processes transactions.
Syntax
ODBC(property[,argument])
Arguments
property
transaction - Gets or sets the active transaction ID. If set, and the transaction ID does not exist and a database name is
specified as an argument, it will be created.
forcecommit - Controls whether a transaction will be automatically committed when the channel hangs up. Defaults to false. If
a transaction ID is specified in the optional argument, the property will be applied to that ID, otherwise to the current active ID.
isolation - Controls the data isolation on uncommitted transactions. May be one of the following:
read_committed, read_uncommitted, repeatable_read, or serializable. Defaults to the database setting in
res_odbc.conf or read_committed if not specified. If a transaction ID is specified as an optional argument, it will be applied
to that ID, otherwise the current active ID.
argument
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_ODBC_FETCH
ODBC_FETCH()
Synopsis
Fetch a row from a multirow query.
Description
For queries which are marked as mode=multirow, the original query returns a result-id from
which results may be fetched. This function implements the actual fetch of the results.
This also sets This also sets None - ODBC_FETCH_STATUS.
ODBC_FETCH_STATUS SUCESS - If rows are available.
FAILURE - If no rows are available.
Syntax
ODBC_FETCH(result-id)
Arguments
result-id
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_PASSTHRU
PASSTHRU()
Synopsis
Pass the given argument back as a value.
Description
Literally returns the given string. The intent is to permit other dialplan functions which take a
variable name as an argument to be able to take a literal string, instead.
Syntax
PASSTHRU([string])
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_PITCH_SHIFT
PITCH_SHIFT()
Synopsis
Pitch shift both tx and rx audio streams on a channel.
Description
Examples:
exten => 1,1,Set(PITCH_SHIFT(tx)=highest); raises pitch an octave
exten => 1,1,Set(PITCH_SHIFT(rx)=higher) ; raises pitch more
exten => 1,1,Set(PITCH_SHIFT(both)=high) ; raises pitch
exten => 1,1,Set(PITCH_SHIFT(rx)=low) ; lowers pitch
exten => 1,1,Set(PITCH_SHIFT(tx)=lower) ; lowers pitch more
exten => 1,1,Set(PITCH_SHIFT(both)=lowest) ; lowers pitch an octave
exten => 1,1,Set(PITCH_SHIFT(rx)=0.8) ; lowers pitch
exten => 1,1,Set(PITCH_SHIFT(tx)=1.5) ; raises pitch
Syntax
PITCH_SHIFT(channel direction)
Arguments
channel direction - Direction can be either rx, tx, or both. The direction can either be set to a valid floating point number between
0.1 and 4.0 or one of the enum values listed below. A value of 1.0 has no effect. Greater than 1 raises the pitch. Lower than 1 lowers the
pitch. The pitch amount can also be set by the following values
highest
higher
high
low
lower
lowest
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_POP
POP()
Synopsis
Removes and returns the last item off of a variable containing delimited text
Description
Example:
exten => s,1,Set(array=one,two,three)
exten => s,n,While($["$\{SET(var=$\{POP(array)\})\}" != ""])
exten => s,n,NoOp(var is ${var})
exten => s,n,EndWhile
This would iterate over each value in array, right to left, and would result in NoOp(var is three),
NoOp(var is two), and NoOp(var is one) being executed.
Syntax
POP(varname[,delimiter])
Arguments
varname
delimiter
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_PP_EACH_EXTENSION
PP_EACH_EXTENSION()
Synopsis
Execute specified template for each extension.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Output the specified template for each extension associated with the specified MAC address.
Syntax
PP_EACH_EXTENSION(mac,template)
Arguments
mac
template
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_PP_EACH_USER
PP_EACH_USER()
Synopsis
Generate a string for each phoneprov user.
Description
Pass in a string, with phoneprov variables you want substituted in the format of %{VARNAME},
and you will get the string rendered for each user in phoneprov excluding ones with MAC
address exclude_mac. Probably not useful outside of res_phoneprov.
Example: ${PP_EACH_USER(<item><fn>%{DISPLAY_NAME}</fn></item>|${MAC})
Syntax
PP_EACH_USER(string,exclude_mac)
Arguments
string
exclude_mac
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_PUSH
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
PUSH()
Synopsis
Appends one or more values to the end of a variable containing delimited text
Description
Example: Set(PUSH(array)=one,two,three) would append one, two, and three to the end of the
values stored in the variable "array".
Syntax
PUSH(varname[,delimiter])
Arguments
varname
delimiter
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_EXISTS
QUEUE_EXISTS()
Synopsis
Check if a named queue exists on this server
Description
Returns 1 if the specified queue exists, 0 if it does not
Syntax
QUEUE_EXISTS([queuename])
Arguments
queuename
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_MEMBER
QUEUE_MEMBER()
Synopsis
Count number of members answering a queue.
Description
Returns the number of members currently associated with the specified queuename.
Syntax
QUEUE_MEMBER(queuename,option)
Arguments
queuename
option
logged - Returns the number of logged-in members for the specified queue.
free - Returns the number of logged-in members for the specified queue that either can take calls or are currently wrapping up
after a previous call.
ready - Returns the number of logged-in members for the specified queue that are immediately available to answer a call.
count - Returns the total number of members for the specified queue.
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_MEMBER_COUNT
QUEUE_MEMBER_COUNT()
Synopsis
Count number of members answering a queue.
Description
Returns the number of members currently associated with the specified queuename.
This function has been deprecated in favor of the QUEUE_MEMBER() function
Syntax
QUEUE_MEMBER_COUNT(queuename)
Arguments
queuename
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_QUEUE_MEMBER_LIST
QUEUE_MEMBER_LIST()
Synopsis
Returns a list of interfaces on a queue.
Description
Returns a comma-separated list of members associated with the specified queuename.
Syntax
QUEUE_MEMBER_LIST(queuename)
Arguments
queuename
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_MEMBER_PENALTY
QUEUE_MEMBER_PENALTY()
Synopsis
Gets or sets queue members penalty.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Gets or sets queue members penalty.
Syntax
QUEUE_MEMBER_PENALTY(queuename,interface)
Arguments
queuename
interface
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_VARIABLES
QUEUE_VARIABLES()
Synopsis
Return Queue information in variables.
Description
Makes the following queue variables available.
Returns 0 if queue is found and setqueuevar is defined, -1 otherwise.
Syntax
QUEUE_VARIABLES(queuename)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
queuename
QUEUEMAX - Maxmimum number of calls allowed.
QUEUESTRATEGY - The strategy of the queue.
QUEUECALLS - Number of calls currently in the queue.
QUEUEHOLDTIME - Current average hold time.
QUEUECOMPLETED - Number of completed calls for the queue.
QUEUEABANDONED - Number of abandoned calls.
QUEUESRVLEVEL - Queue service level.
QUEUESRVLEVELPERF - Current service level performance.
See Also
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUEUE_WAITING_COUNT
QUEUE_WAITING_COUNT()
Synopsis
Count number of calls currently waiting in a queue.
Description
Returns the number of callers currently waiting in the specified queuename.
Syntax
QUEUE_WAITING_COUNT([queuename])
Arguments
queuename
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Application_Queue
Application_QueueLog
Application_AddQueueMember
Application_RemoveQueueMember
Application_PauseQueueMember
Application_UnpauseQueueMember
Function_QUEUE_VARIABLES
Function_QUEUE_MEMBER
Function_QUEUE_MEMBER_COUNT
Function_QUEUE_EXISTS
Function_QUEUE_WAITING_COUNT
Function_QUEUE_MEMBER_LIST
Function_QUEUE_MEMBER_PENALTY
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_QUOTE
QUOTE()
Synopsis
Quotes a given string, escaping embedded quotes as necessary
Description
Example: ${QUOTE(ab"c"de)} will return "abcde"
Syntax
QUOTE(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_RAND
RAND()
Synopsis
Choose a random number in a range.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Choose a random number between min and max. min defaults to 0, if not specified, while max
defaults to RAND_MAX (2147483647 on many systems).
Example: Set(junky=${RAND(1,8)}); Sets junky to a random number between 1 and 8, inclusive.
Syntax
RAND([min[,max]])
Arguments
min
max
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REALTIME
REALTIME()
Synopsis
RealTime Read/Write Functions.
Description
This function will read or write values from/to a RealTime repository. REALTIME(....) will read
names/values from the repository, and REALTIME(....)= will write a new value/field to the
repository. On a read, this function returns a delimited text string. The name/value pairs are
delimited by delim1, and the name and value are delimited between each other with delim2. If
there is no match, NULL will be returned by the function. On a write, this function will always
return NULL.
Syntax
REALTIME(family,fieldmatch[,value[,delim1|field[,delim2]]])
Arguments
family
fieldmatch
value
delim1|field - Use delim1 with delim2 on read and field without delim2 on write If we are reading and delim1 is not specified, defaults
to ,
delim2 - Parameter only used when reading, if not specified defaults to =
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
Function_REALTIME_STORE
Function_REALTIME_DESTROY
Function_REALTIME_FIELD
Function_REALTIME_HASH
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REALTIME_DESTROY
REALTIME_DESTROY()
Synopsis
RealTime Destroy Function.
Description
This function acts in the same way as REALTIME(....) does, except that it destroys the matched
record in the RT engine.
Syntax
REALTIME_DESTROY(family,fieldmatch[,value[,delim1[,delim2]]])
Arguments
family
fieldmatch
value
delim1
delim2
See Also
Function_REALTIME
Function_REALTIME_STORE
Function_REALTIME_FIELD
Function_REALTIME_HASH
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REALTIME_FIELD
REALTIME_FIELD()
Synopsis
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
RealTime query function.
Description
This function retrieves a single item, fieldname from the RT engine, where fieldmatch contains
the value value. When written to, the REALTIME_FIELD() function performs identically to the
REALTIME() function.
Syntax
REALTIME_FIELD(family,fieldmatch,value,fieldname)
Arguments
family
fieldmatch
value
fieldname
See Also
Function_REALTIME
Function_REALTIME_STORE
Function_REALTIME_DESTROY
Function_REALTIME_HASH
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REALTIME_HASH
REALTIME_HASH()
Synopsis
RealTime query function.
Description
This function retrieves a single record from the RT engine, where fieldmatch contains the value
value and formats the output suitably, such that it can be assigned to the HASH() function. The
HASH() function then provides a suitable method for retrieving each field value of the record.
Syntax
REALTIME_HASH(family,fieldmatch,value)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
family
fieldmatch
value
See Also
Function_REALTIME
Function_REALTIME_STORE
Function_REALTIME_DESTROY
Function_REALTIME_FIELD
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REALTIME_STORE
REALTIME_STORE()
Synopsis
RealTime Store Function.
Description
This function will insert a new set of values into the RealTime repository. If RT engine provides
an unique ID of the stored record, REALTIME_STORE(...)=.. creates channel variable named
RTSTOREID, which contains value of unique ID. Currently, a maximum of 30 field/value pairs is
supported.
Syntax
REALTIME_STORE(family,field1,fieldN[,...],field30)
Arguments
family
field1
fieldN
field30
See Also
Function_REALTIME
Function_REALTIME_DESTROY
Function_REALTIME_FIELD
Function_REALTIME_HASH
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_REDIRECTING
REDIRECTING()
Synopsis
Gets or sets Redirecting data on the channel.
Description
Gets or sets Redirecting data on the channel.
The allowable values for the reason field are the following:
Unknown
Call Forwarding Busy
Call Forwarding No Reply
Callee is Unavailable
Time of Day
Do Not Disturb
Call Deflection
Follow Me
Called DTE Out-Of-Order
Callee is Away
Call Forwarding By The Called DTE
Call Forwarding Unconditional
The allowable values for the xxx-name-charset field are the following:
Unknown
ISO8859-1
Withdrawn
ISO8859-2
ISO8859-3
ISO8859-4
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
ISO8859-5
ISO8859-7
ISO10646 Bmp String
ISO10646 UTF-8 String
Syntax
REDIRECTING(datatype[,i])
Arguments
datatype - The allowable datatypes are:
from-all
from-name
from-name-valid
from-name-charset
from-name-pres
from-num
from-num-valid
from-num-plan
from-num-pres
from-subaddr
from-subaddr-valid
from-subaddr-type
from-subaddr-odd
from-tag
to-all
to-name
to-name-valid
to-name-charset
to-name-pres
to-num
to-num-valid
to-num-plan
to-num-pres
to-subaddr
to-subaddr-valid
to-subaddr-type
to-subaddr-odd
to-tag
reason
count
i - If set, this will prevent the channel from sending out protocol messages because of the value being set
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REGEX
REGEX()
Synopsis
Check string against a regular expression.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Return 1 on regular expression match or 0 otherwise
Please note that the space following the double quotes separating the regex from the data is
optional and if present, is skipped. If a space is desired at the beginning of the data, then put two
spaces there; the second will not be skipped.
Syntax
REGEX("regular expression",string)
Arguments
"regular expression"
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_REPLACE
REPLACE()
Synopsis
Replace a set of characters in a given string with another character.
Description
Iterates through a string replacing all the find-chars with replace-char. replace-char may be either
empty or contain one character. If empty, all find-chars will be deleted from the output.
The replacement only occurs in the output. The original variable is not altered.The replacement
only occurs in the output. The original variable is not altered.
Syntax
REPLACE(varname,find-chars[,replace-char])
Arguments
varname
find-chars
replace-char
See Also
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SET
SET()
Synopsis
SET assigns a value to a channel variable.
Description
Syntax
SET(varname[,value])
Arguments
varname
value
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SHA1
SHA1()
Synopsis
Computes a SHA1 digest.
Description
Generate a SHA1 digest via the SHA1 algorythm.
Example: Set(sha1hash=${SHA1(junky)})
Sets the asterisk variable sha1hash to the string
60fa5675b9303eb62f99a9cd47f9f5837d18f9a0 which is known as his hash
Syntax
SHA1(data)
Arguments
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
data - Input string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SHARED
SHARED()
Synopsis
Gets or sets the shared variable specified.
Description
Implements a shared variable area, in which you may share variables between channels.
The variables used in this space are separate from the general namespace of the channel and
thus The variables used in this space are separate from the general namespace of the channel
and thus None - SHARED(foo) and The variables used in this space are separate from the
general namespace of the channel and thus None - foo represent two completely different
variables, despite sharing the same name.
Finally, realize that there is an inherent race between channels operating at the same time,
fiddling with each others' internal variables, which is why this special variable namespace exists;
it is to remind you that variables in the SHARED namespace may change at any time, without
warning. You should therefore take special care to ensure that when using the SHARED
namespace, you retrieve the variable and store it in a regular channel variable before using it in a
set of calculations (or you might be surprised by the result).
Syntax
SHARED(varname[,channel])
Arguments
varname - Variable name
channel - If not specified will default to current channel. It is the complete channel name:
SIP/12-abcd1234 or the prefix only SIP/12.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SHELL
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SHELL()
Synopsis
Executes a command as if you were at a shell.
Description
Returns the value from a system command
Example:
Set(foo=${SHELL(echo \bar)})
When using the SHELL() dialplan function, your \SHELL\ is /bin/sh, which may differ as to the
underlying shell, depending upon your production platform. Also keep in mind that if you are
using a common path, you should be mindful of race conditions that could result from two calls
running SHELL() simultaneously.When using the SHELL() dialplan function, your \SHELL\ is
/bin/sh, which may differ as to the underlying shell, depending upon your production platform.
Also keep in mind that if you are using a common path, you should be mindful of race conditions
that could result from two calls running SHELL() simultaneously.
Syntax
SHELL(command)
Arguments
command - This is the argument to the function, the command you want to pass to the shell.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SHIFT
SHIFT()
Synopsis
Removes and returns the first item off of a variable containing delimited text
Description
Example:
exten => s,1,Set(array=one,two,three)
exten => s,n,While($["$\{SET(var=$\{SHIFT(array)\})\}" != ""])
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
exten => s,n,NoOp(var is ${var})
exten => s,n,EndWhile
This would iterate over each value in array, left to right, and would result in NoOp(var is one),
NoOp(var is two), and NoOp(var is three) being executed.
Syntax
SHIFT(varname[,delimiter])
Arguments
varname
delimiter
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SIP_HEADER
SIP_HEADER()
Synopsis
Gets the specified SIP header from an incoming INVITE message.
Description
Since there are several headers (such as Via) which can occur multiple times, SIP_HEADER
takes an optional second argument to specify which header with that name to retrieve. Headers
start at offset 1.
Syntax
SIP_HEADER(name[,number])
Arguments
name
number - If not specified, defaults to 1.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r338609.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_SIPCHANINFO
SIPCHANINFO()
Synopsis
Gets the specified SIP parameter from the current channel.
Description
Syntax
SIPCHANINFO(item)
Arguments
item
peerip - The IP address of the peer.
recvip - The source IP address of the peer.
from - The URI from the From: header.
uri - The URI from the Contact: header.
useragent - The useragent.
peername - The name of the peer.
t38passthrough - 1 if T38 is offered or enabled in this channel, otherwise 0.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SIPPEER
SIPPEER()
Synopsis
Gets SIP peer information.
Description
Syntax
SIPPEER(peername[,item])
Arguments
peername
item
ip - (default) The ip address.
port - The port number.
mailbox - The configured mailbox.
context - The configured context.
expire - The epoch time of the next expire.
dynamic - Is it dynamic? (yes/no).
callerid_name - The configured Caller ID name.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
callerid_num - The configured Caller ID number.
callgroup - The configured Callgroup.
pickupgroup - The configured Pickupgroup.
codecs - The configured codecs.
status - Status (if qualify=yes).
regexten - Registration extension.
limit - Call limit (call-limit).
busylevel - Configured call level for signalling busy.
curcalls - Current amount of calls. Only available if call-limit is set.
language - Default language for peer.
accountcode - Account code for this peer.
useragent - Current user agent id for peer.
maxforwards - The value used for SIP loop prevention in outbound requests
chanvarname - A channel variable configured with setvar for this peer.
codecx - Preferred codec index number x (beginning with zero).
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SMDI_MSG
SMDI_MSG()
Synopsis
Retrieve details about an SMDI message.
Description
This function is used to access details of an SMDI message that was pulled from the incoming
SMDI message queue using the SMDI_MSG_RETRIEVE() function.
Syntax
SMDI_MSG(message_id,component)
Arguments
message_id
component - Valid message components are:
number - The message desk number
terminal - The message desk terminal
station - The forwarding station
callerid - The callerID of the calling party that was forwarded
type - The call type. The value here is the exact character that came in on the SMDI link. Typically, example values are:
Options:
D - Direct Calls
A - Forward All Calls
B - Forward Busy Calls
N - Forward No Answer Calls
See Also
Function_SMDI_MSG_RETRIEVE
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SMDI_MSG_RETRIEVE
SMDI_MSG_RETRIEVE()
Synopsis
Retrieve an SMDI message.
Description
This function is used to retrieve an incoming SMDI message. It returns an ID which can be used
with the SMDI_MSG() function to access details of the message. Note that this is a destructive
function in the sense that once an SMDI message is retrieved using this function, it is no longer
in the global SMDI message queue, and can not be accessed by any other Asterisk channels.
The timeout for this function is optional, and the default is 3 seconds. When providing a timeout,
it should be in milliseconds.
The default search is done on the forwarding station ID. However, if you set one of the search
key options in the options field, you can change this behavior.
Syntax
SMDI_MSG_RETRIEVE(smdi port,search key[,timeout[,options]])
Arguments
smdi port
search key
timeout
options
t - Instead of searching on the forwarding station, search on the message desk terminal.
n - Instead of searching on the forwarding station, search on the message desk number.
See Also
Function_SMDI_MSG
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SORT
SORT()
Synopsis
Sorts a list of key/vals into a list of keys, based upon the vals.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
Takes a comma-separated list of keys and values, each separated by a colon, and returns a
comma-separated list of the keys, sorted by their values. Values will be evaluated as
floating-point numbers.
Syntax
SORT(key1val1[,key2val2[,...]])
Arguments
keyval
key1
val1
keyvaln
key2
val2
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPEECH
SPEECH()
Synopsis
Gets information about speech recognition results.
Description
Gets information about speech recognition results.
Syntax
SPEECH(argument)
Arguments
argument
status - Returns 1 upon speech object existing, or 0 if not
spoke - Returns 1 if spoker spoke, or 0 if not
results - Returns number of results that were recognized.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_SPEECH_ENGINE
SPEECH_ENGINE()
Synopsis
Change a speech engine specific attribute.
Description
Changes a speech engine specific attribute.
Syntax
SPEECH_ENGINE(name)
Arguments
name
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPEECH_GRAMMAR
SPEECH_GRAMMAR()
Synopsis
Gets the matched grammar of a result if available.
Description
Gets the matched grammar of a result if available.
Syntax
SPEECH_GRAMMAR([nbest_number,result_number])
Arguments
nbest_number
result_number
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPEECH_RESULTS_TYPE
SPEECH_RESULTS_TYPE()
Synopsis
Sets the type of results that will be returned.
Description
Sets the type of results that will be returned. Valid options are normal or nbest.
Syntax
SPEECH_RESULTS_TYPE()
Arguments
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPEECH_SCORE
SPEECH_SCORE()
Synopsis
Gets the confidence score of a result.
Description
Gets the confidence score of a result.
Syntax
SPEECH_SCORE([nbest_number,result_number])
Arguments
nbest_number
result_number
See Also
Import Version
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPEECH_TEXT
SPEECH_TEXT()
Synopsis
Gets the recognized text of a result.
Description
Gets the recognized text of a result.
Syntax
SPEECH_TEXT([nbest_number,result_number])
Arguments
nbest_number
result_number
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SPRINTF
SPRINTF()
Synopsis
Format a variable according to a format string.
Description
Parses the format string specified and returns a string matching that format. Supports most
options found in sprintf(3). Returns a shortened string if a format specifier is not recognized.
Syntax
SPRINTF(format,arg1[,arg2[,...][,argN]])
Arguments
format
arg1
arg2
argN
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
See Also
sprintf(3)
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SQL_ESC
SQL_ESC()
Synopsis
Escapes single ticks for use in SQL statements.
Description
Used in SQL templates to escape data which may contain single ticks ' which are otherwise
used to delimit data.
Example: SELECT foo FROM bar WHERE baz='${SQL_ESC(${ARG1})}'
Syntax
SQL_ESC(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SRVQUERY
SRVQUERY()
Synopsis
Initiate an SRV query.
Description
This will do an SRV lookup of the given service.
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
SRVQUERY(service)
Arguments
service - The service for which to look up SRV records. An example would be something like _sip._udp.example.com
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SRVRESULT
SRVRESULT()
Synopsis
Retrieve results from an SRVQUERY.
Description
This function will retrieve results from a previous use of the SRVQUERY function.
Syntax
SRVRESULT(id,resultnum)
Arguments
id - The identifier returned by the SRVQUERY function.
resultnum - The number of the result that you want to retrieve. Results start at 1. If this argument is specified as getnum, then it will
return the total number of results that are available.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_STAT
STAT()
Synopsis
Does a check on the specified file.
Description
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
STAT(flag,filename)
Arguments
flag - Flag may be one of the following: d - Checks if the file is a directory. e - Checks if the file exists. f - Checks if the file is a regular
file. m - Returns the file mode (in octal) s - Returns the size (in bytes) of the file A - Returns the epoch at which the file was last accessed.
C - Returns the epoch at which the inode was last changed. M - Returns the epoch at which the file was last modified.
filename
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_STRFTIME
STRFTIME()
Synopsis
Returns the current date/time in the specified format.
Description
STRFTIME supports all of the same formats as the underlying C function strftime(3). It also
supports the following format:
%nq - fractions of a second, with leading zeros.
Example:
%3q will give milliseconds and %1q will give tenths of a second. The default is set at milliseconds
(n=3). The common case is to use it in combination with %S, as in %S.%3q.
Syntax
STRFTIME([epoch[,timezone[,format]]])
Arguments
epoch
timezone
format
See Also
strftime(3)
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Function_STRPTIME
STRPTIME()
Synopsis
Returns the epoch of the arbitrary date/time string structured as described by the format.
Description
This is useful for converting a date into EPOCH time, possibly to pass to an application like
SayUnixTime or to calculate the difference between the two date strings
Example: ${STRPTIME(2006-03-01 07:30:35,America/Chicago,%Y-%m-%d %H:%M:%S)}
returns 1141219835
Syntax
STRPTIME(datetime,timezone,format)
Arguments
datetime
timezone
format
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_SYSINFO
SYSINFO()
Synopsis
Returns system information specified by parameter.
Description
Returns information from a given parameter.
Syntax
SYSINFO(parameter)
Arguments
parameter
loadavg - System load average from past minute.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
numcalls - Number of active calls currently in progress.
uptime - System uptime in hours. This parameter is dependant upon operating system.This parameter is dependant upon
operating system.
totalram - Total usable main memory size in KiB. This parameter is dependant upon operating system.This parameter is
dependant upon operating system.
freeram - Available memory size in KiB. This parameter is dependant upon operating system.This parameter is dependant
upon operating system.
bufferram - Memory used by buffers in KiB. This parameter is dependant upon operating system.This parameter is dependant
upon operating system.
totalswap - Total swap space still available in KiB. This parameter is dependant upon operating system.This parameter is
dependant upon operating system.
freeswap - Free swap space still available in KiB. This parameter is dependant upon operating system.This parameter is
dependant upon operating system.
numprocs - Number of current processes. This parameter is dependant upon operating system.This parameter is dependant
upon operating system.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TESTTIME
TESTTIME()
Synopsis
Sets a time to be used with the channel to test logical conditions.
Description
To test dialplan timing conditions at times other than the current time, use this function to set an
alternate date and time. For example, you may wish to evaluate whether a location will correctly
identify to callers that the area is closed on Christmas Day, when Christmas would otherwise fall
on a day when the office is normally open.
Syntax
TESTTIME(date time[,zone])
Arguments
date - Date in ISO 8601 format
time - Time in HH:MM:SS format (24-hour time)
zone - Timezone name
See Also
Application_GotoIfTime
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TIMEOUT
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
TIMEOUT()
Synopsis
Gets or sets timeouts on the channel. Timeout values are in seconds.
Description
The timeouts that can be manipulated are:
absolute : The absolute maximum amount of time permitted for a call. Setting of 0 disables the
timeout. digit : The maximum amount of time permitted between digits when the user is typing
in an extension. When this timeout expires, after the user has started to type in an extension, the
extension will be considered complete, and will be interpreted. Note that if an extension typed in
is valid, it will not have to timeout to be tested, so typically at the expiry of this timeout, the
extension will be considered invalid (and thus control would be passed to the i extension, or if it
doesn't exist the call would be terminated). The default timeout is 5 seconds. response : The
maximum amount of time permitted after falling through a series of priorities for a channel in
which the user may begin typing an extension. If the user does not type an extension in this
amount of time, control will pass to the t extension if it exists, and if not the call would be
terminated. The default timeout is 10 seconds.
Syntax
TIMEOUT(timeouttype)
Arguments
timeouttype - The timeout that will be manipulated. The possible timeout types are:
absolute, digit or response
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TOLOWER
TOLOWER()
Synopsis
Convert string to all lowercase letters.
Description
Example: ${TOLOWER(Example)} returns "example"
Syntax
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
TOLOWER(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TOUPPER
TOUPPER()
Synopsis
Convert string to all uppercase letters.
Description
Example: ${TOUPPER(Example)} returns "EXAMPLE"
Syntax
TOUPPER(string)
Arguments
string
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TRYLOCK
TRYLOCK()
Synopsis
Attempt to obtain a named mutex.
Description
Attempts to grab a named lock exclusively, and prevents other channels from obtaining the same
lock. Returns 1 if the lock was available or 0 otherwise.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Syntax
TRYLOCK(lockname)
Arguments
lockname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_TXTCIDNAME
TXTCIDNAME()
Synopsis
TXTCIDNAME looks up a caller name via DNS.
Description
This function looks up the given phone number in DNS to retrieve the caller id name. The result
will either be blank or be the value found in the TXT record in DNS.
Syntax
TXTCIDNAME(number[,zone-suffix])
Arguments
number
zone-suffix - If no zone-suffix is given, the default will be e164.arpa
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_UNLOCK
UNLOCK()
Synopsis
Unlocks a named mutex.
Description
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Unlocks a previously locked mutex. Returns 1 if the channel had a lock or 0 otherwise.
It is generally unnecessary to unlock in a hangup routine, as any locks held are automatically
freed when the channel is destroyed.It is generally unnecessary to unlock in a hangup routine, as
any locks held are automatically freed when the channel is destroyed.
Syntax
UNLOCK(lockname)
Arguments
lockname
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_UNSHIFT
UNSHIFT()
Synopsis
Inserts one or more values to the beginning of a variable containing delimited text
Description
Example: Set(UNSHIFT(array)=one,two,three) would insert one, two, and three before the values
stored in the variable "array".
Syntax
UNSHIFT(varname[,delimiter])
Arguments
varname
delimiter
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_URIDECODE
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
URIDECODE()
Synopsis
Decodes a URI-encoded string according to RFC 2396.
Description
Returns the decoded URI-encoded data string.
Syntax
URIDECODE(data)
Arguments
data - Input string to be decoded.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_URIENCODE
URIENCODE()
Synopsis
Encodes a string to URI-safe encoding according to RFC 2396.
Description
Returns the encoded string defined in data.
Syntax
URIENCODE(data)
Arguments
data - Input string to be encoded.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_VALID_EXTEN
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
VALID_EXTEN()
Synopsis
Determine whether an extension exists or not.
Description
Returns a true value if the indicated context, extension, and priority exist.
Syntax
VALID_EXTEN([context,extension[,priority]])
Arguments
context - Defaults to the current context
extension
priority - Priority defaults to 1.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_VERSION
VERSION()
Synopsis
Return the Version info for this Asterisk.
Description
If there are no arguments, return the version of Asterisk in this format: SVN-branch-1.4-r44830M
Example: Set(junky=${VERSION()};
Sets junky to the string SVN-branch-1.6-r74830M, or possibly, SVN-trunk-r45126M.
Syntax
VERSION([info])
Arguments
info - The possible values are:
ASTERISK_VERSION_NUM - A string of digits is returned (right now fixed at 999999).
BUILD_USER - The string representing the user's name whose account was used to configure Asterisk, is returned.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
BUILD_HOSTNAME - The string representing the name of the host on which Asterisk was configured, is returned.
BUILD_MACHINE - The string representing the type of machine on which Asterisk was configured, is returned.
BUILD_OS - The string representing the OS of the machine on which Asterisk was configured, is returned.
BUILD_DATE - The string representing the date on which Asterisk was configured, is returned.
BUILD_KERNEL - The string representing the kernel version of the machine on which Asterisk was configured, is returned.
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_VMCOUNT
VMCOUNT()
Synopsis
Count the voicemails in a specified mailbox.
Description
Count the number of voicemails in a specified mailbox, you could also specify the context and
the mailbox folder.
Example:
exten => s,1,Set(foo=${VMCOUNT(125)})
Syntax
VMCOUNT(vmbox[@context][,folder])
Arguments
vmbox
vmbox
context - If not specified, defaults to default.
folder - If not specified, defaults to INBOX
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Function_VOLUME
VOLUME()
Synopsis
Set the TX or RX volume of a channel.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Description
The VOLUME function can be used to increase or decrease the tx or rx gain of any channel.
For example:
Set(VOLUME(TX)=3)
Set(VOLUME(RX)=2)
Set(VOLUME(TX,p)=3)
Set(VOLUME(RX,p)=3>
Syntax
VOLUME(direction[,options])
Arguments
direction - Must be TX or RX.
options
p - Enable DTMF volume control
See Also
Import Version
This documentation was imported from Asterisk version SVN-branch-1.8-r311874.
Content is licensed under a Creative Commons Attribution-ShareAlike 3.0 United States License.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising