RX 350 Lexus Personalized Settings

RX 350 Lexus Personalized Settings
RX 350
Lexus Personalized Settings
Lexus Personalized Settings
Your vehicle includes a variety of electronic features that can be
programmed to your preferences. Programming of these features is
performed once at no charge, provided you obtain the service at the
30 day/1,000-mile scheduled maintenance service. Programming of your
Lexus Personalized Settings requires special equipment and may be
performed only by an authorized Lexus dealership.
Repair Order Number
Vehicle Identification Number (VIN)
Door Lock Systems
1
Unlocking the driver’s door/all passenger doors
By pressing the remote key door unlock button, the following functions
can be programmed:
Pressing the unlock button one time will unlock all doors.
(Rear included)
Pressing the unlock button one time unlocks the driver’s door,
and two times unlocks all doors. (Standard)
2
Flashing of signal lights
Using the remote key, the following functions can be programmed:
Press the LOCK or UNLOCK button on the remote key and
the lights will not flash.
Press the LOCK button and the lights will flash once. Press the
UNLOCK button and the lights will flash twice. (Standard)
3
Unlocking of doors when placing vehicle into park
While the engine is running and the vehicle is placed into park, the
vehicle can be programmed for the following:
When placing the vehicle into park, all of the doors will
remain LOCKED.
When placing the vehicle into park, ALL the doors will
automatically UNLOCK. (Standard)
4
Locking of doors when shifting from park into
another range
While the brake pedal is being pressed and the vehicle is taken out of park
and placed into another range, the doors can be programmed for the
following:
Remain unchanged.
Automatically lock. (Standard)
1
Power Windows
5
Using the remote key to open all windows
By pressing the UNLOCK button on the remote key for 3 seconds,
the vehicle can be programmed for the following:
The windows will not roll down.
All the windows will roll down. (Standard)
* Note: See moonroof for additional options.
Moonroof
6
Using the remote key to open moonroof
By pressing the UNLOCK button on the remote key for 3 seconds,
the following functions can be programmed:
The moonroof will not open.
The moonroof will open. (Standard)
* Note: Option #5 must be on.
7
Using the remote key to slide/tilt moonroof
When option #5 and #6 are active, the moonroof can be programmed
for the following:
Slide. (Standard)
Tilt.
2
Lighting Systems
8
Illumination of the cabin light
After closing the door, the interior lights can be adjusted to stay on for
the following:
15 seconds. (Standard)
7.5 seconds.
30 seconds.
9
Delay for the headlights to turn off
After turning off the ignition and all the doors are closed, if the
headlights are ON or in the AUTO position, the headlights can be
programmed for the following:
Turn off immediately, when the vehicle is turned off and the driver’s
door is opened.
Turn off in 30 seconds. (Standard)
Turn off in 60 seconds.
Turn off in 90 seconds.
10
Sensitivity of automatic headlights
While driving the vehicle and the headlight switch is placed in the
“AUTO” mode, the front headlights can be programmed to turn ON
under darker or lighter ambient light conditions.
Very dark
Dark
Normal
Light
Very light
3
Tilt Steering Wheel
11
Auto tilt away of the steering wheel
When the vehicle is placed in park, the ignition turned off, and the key is
removed from the ignition, the steering wheel can be set to the following:
Automatically move up and away from the driver position setting.
(Standard)
Remain in the current position, as set by the driver.
Air Conditioner
12
Automatic recirculation of air when using A/C
When the air conditioner is ON or in AUTO, the vehicle can be
programmed for the following:
To automatically switch between the recirculation mode and fresh air
mode as necessary to meet the temperature requirements set.
(Standard)
When the climate control is turned on, the user must manually select
the desired mode, recirculation or fresh air mode.
Power Back Door
13
Power back door buzzer volume
When opening the rear door, the buzzer volume can be programmed
for the following:
6-7 high beeps activate when opening/closing the vehicle.
6-7 medium beeps activate when opening/closing the vehicle.
2 medium beeps activate when opening/closing the vehicle.
(Standard)
4
14
Power back door assist
After unlocking all of the doors, and manually pressing the release button
on the rear door, the vehicle can be programmed for the following:
When pressing the release button, the door must be opened
manually. (Standard)
When pressing the release button, the rear door will be assisted
and open automatically.
15
One motion power back door
When opening the rear door, the vehicle can be programmed for
the following:
After unlocking all the doors, then pressing the rear door release
button on the remote key or inside the vehicle, the rear door will
open automatically.
After pressing the rear door release button on the remote key, the rear
door will open. (Doors do not need to be unlocked first) (Standard)
* Note: Option #16 is not available if one motion (#2) is selected. The back door
will not lock automatically after it has been opened and then closed. You can
lock the back door, with your vehicles wireless remote, when you
leave your vehicle.
16
Power back door
After all the doors have been unlocked, the rear door can be
programmed for the following:
After momentarily pressing the rear door release button on the
remote key, the rear door will open.
After pressing the rear door release button twice on the remote key,
the rear door will open.
After pressing and holding the rear door release button on the
remote key for 0.8 seconds, the rear door will open. (Standard)
The rear door, release door button is turned off and will not function.
5
00242-RX350-09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising