S610 Exit Reader
S610 Exit Reader
DESfire Intelligent Reader
Features That Make a Difference:
•
Intelligent card reader designed for use as
part of the CEM AC2000 access control
software range
•
Contactless card presentation with the
option to enable Personnel Identification
Number (PIN) for two stage authentication
•
Integral reading support for 13.56 MHz
MiFare/DESfire smartcard technology
•
Communicates directly with the master
reader
The S610 Exit Card Reader is designed
for use as part of an integrated on-line
access control system. The Exit Reader
is an extension to the master reader,
providing a secure, fully featured exit
reader solution at the point of entry.
On-board Card Reading
Technology
The IP66 rated polycarbonate enclosure
houses the reader electronics and comes
with a large 4x3 keypad, graphical display
screen and three LED indicators.
Reader Messages
•
Large graphical LCD which is used to
display a number of predefined messages
•
Four analog inputs to monitor door or
alarm conditions
•
Two changeover relay outputs available for
general purpose usage
•
Easy to install
•
Weather-proof casing: IP66 rated
The S610 Exit reader provides an
additional four analog inputs, which
can be used to monitor door and alarm
conditions for transmission to the host
server. All four inputs are four state
(tamper detect) capable. Two outputs are
also fitted for general purpose usage.
•
Available in grey and black
Host Communications
The S610 Exit Reader has an onboard RS485 connection allowing it to
communicate directly with the master
reader, removing the need for an intelligent
control panel in the system design.
www.cemsys.com
Designed for use with 13.56 MHz MiFare/
DESfire smartcard technology. Two
additional Wiegand interfaces are available
for connecting third party readers.
The S610 Exit Reader has a large
graphical LCD which is used to display
a number of predefined messages
to cardholders depending on their
privileges e.g. Wrong Zone, Lost/Stolen
Card, Card About to Expire, Access
Granted and many more. Messages
displayed by the S610 Exit Reader can
be modified via the AC2000 software.
Easy to Install
The S610 Exit reader is designed to be
extremely easy to install. The installer
simply connects the reader via RS485 to
the pairing master and the reader. The Exit
reader then self-configures by downloading
configuration directly from the master reader.
Specification
Physical
Size . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . .
Housing . . . . . . . . . . . . . . . . .
Colour options . . . . . . . . . . . .
142 x 115 x 44mm (5.6 x 4.5 x 1.7inch)
370g (13oz) with connectors
Flame retardant polycarbonate containing
fully encapsulated electronics.
Dark and Light Grey or Black
Power Requirements
Voltage . . . . . . . . . . . . . . . . . . 9 – 14Vdc
Current Consumption . . . . . . . 320Ma Passive, 480Ma Active
Environmental
IP Rating . . . . . . . . . . . . . . . .
Temperature . . . . . . . . . . . . . .
LED Indicators . . . . . . . . . . . .
LCD Indicators . . . . . . . . . . . .
Keypad . . . . . . . . . . . . . . . . . .
IP66
-20°C to 60°C (-4°F to 140°F)
Three high intensity LED indicators, Red,
Amber and Green
32 x 122 dots Monochrome Graphics LCD
with backlight
12 character, standard layout, tactile
response keypad
Functionality
Inputs . . . . . . . . . . . . . . . . . . .
Outputs . . . . . . . . . . . . . . . . .
Rating . . . . . . . . . . . . . . . . . . .
Duration . . . . . . . . . . . . . . . . .
Memory . . . . . . . . . . . . . . . . .
Database battery backup . . . .
Four analogue inputs – voltage supplied,
4 state (tamper detect)
Two relay fitted – changeover volt free contacts
30Vdc @ 5A
Programmable suppression device
(diode, MOV) required at load
2MB battery backed memory
3.0V rechargeable Lithium-Ion
Communication Interface
To Exit Reader . . . . . . . . . . . .
Interfaces . . . . . . . . . . . . . . . .
Connection . . . . . . . . . . . . . . .
To system Host . . . . . . . . . . .
RS485
Two Wiegand interfaces with a maximum
cable length of 150M
2 part JST connector
Via Master Reader
Requirements
• AC2000
• AC2000 Airport
• AC2000 Lite
• S610 Master Reader
• RTC Ethernet reader controller licence
Ordering Information
Product Codes
Description
Grey Version
RDR/612/107
S610 Exit 13.56MHz CEM DESFire
Black Version
RDR/612/117
S610e Exit 13.56MHz CEM DESFire
Related Products
AC2000
AC2000 Airport
AC2000 Lite
www.cemsys.com
© 2014 Tyco Security Products. All Rights Reserved. CEM/B/158 Rev A
Tyco and the product names listed above are marks and/or registered marks. Unauthorized use is strictly prohibited.
Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising