Wi-Fi AP Authentication Aerohive Configuration

Wi-Fi AP Authentication Aerohive Configuration
Barracuda NextGen Firewall X
Wi-Fi AP Authentication Aerohive Configuration
To authenticate users connected to Aerohive access points, you must stream the syslog containing the
authentication data to the Barracuda NextGen Firewall X-Series.
Reference Devices/Versions:
Aerohive AP230 802.11ac Wireless AP Version 6.4r1a
Aerohive Networks HiveManager Online 6.4r1
Enable Syslog Streaming on the Aerohive AP
1. Log into the Aerohive Networks HiveManager.
2. Go to Configuration > Advanced Configuration > Management Services > Syslog Assignments.
3. Click New and configure syslog streaming:
Syslog Server – Select the IP address of the X-Series Firewall from the dropdown.
Severity – Select Info from the dropdown.
4. Click Apply.
5. Click Save.
Wi-Fi AP Authentication Aerohive Configuration
1/3
Barracuda NextGen Firewall X
Add Syslog Configuration to Network Policy
Add the syslog configuration to the Network Policy you are using for your access points.
You can now configure Wi-Fi Access Point authentication on the X-Series Firewall. For more information, see How
to Configure Wi-Fi Access Point Authentication.
Wi-Fi AP Authentication Aerohive Configuration
2/3
Barracuda NextGen Firewall X
Wi-Fi AP Authentication Aerohive Configuration
3/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising