Marking a Waypoint

To mark your current location:

1. Press and hold ENTER/MARK until the Review

Waypoint Page appears. The GPSMAP 3006C/3010C captures your current location, and then creates a default name and symbol for the new waypoint.

2. To accept the waypoint with the default information, press ENTER, or to change any waypoint information, highlight the appropriate field, and press ENTER.

To create a new waypoint from a map feature:

1. Use the map pointer to highlight a map feature.

2. Press and release ENTER/MARK to capture the pointer location, and open the Review Page.

3. Press the Create Wpt soft key to open the Review

Waypoint Page.

4. To accept the waypoint with the default information, press ENTER, or to change any waypoint information, highlight the appropriate field, and press ENTER.

Review Waypoint Page

Review Map Point Page

Navigating to a Destination

To navigate to a destination:

1. Press NAV to access the Navigation Menu.

2. Highlight Go To Point, Follow Route, Follow Track, or TracBack, and press ENTER.

3. Use the ROCKER to highlight a point, track, or route from the list, and press ENTER.

4. If you selected a point, press the Go To soft key. If you selected a route or saved track, choose from the selections, and press ENTER.

5. Follow the magenta route created on the Map Page. You can also use the Compass Page to help you navigate.

Finding an Item

To find an item from your current location:

1. From any page, press FIND to open the Find From Current Position Page.

2. Highlight a category, and press ENTER. For some categories, you might need to select multiple subcategories.

3. Highlight an item in the search results list, and press ENTER. The Review Page appears showing item information, map location, chart name, distance and bearing, and options for creating a waypoint or viewing the next item in the search results list.

Find From Current Position Page Review Waypoint Page

Using the MOB (Man OverBoard) Feature

The Man OverBoard (MOB) function simultaneously marks and sets a course back to the marked location for quick response to emergency situations.

To start the MOB function:

1. Press and hold NAV/MOB. A message appears asking you if you want to begin navigation to the MOB waypoint.

2. Press ENTER to begin navigating to the

MOB location.

3. To stop navigation to the MOB location, press NAV, highlight Stop Navigation, and press ENTER.

To stop navigation to the MOB location:

1. Press NAV/MOB.

2. Highlight Stop Navigation, and press ENTER.

Man OverBoard

Navigation Menu Navigation Shown on the Map Page

GPSMAP ® 3006C/3010C

quick reference guide

Startup/Shutdown Sequence

To turn on the GPSMAP 3006C/3010C:

1. Press and hold the POWER key.

2. When the I Agree on-screen button is highlighted, press ENTER to acknowledge the warning and open the Map Page.

Warning Page

To turn off the GPSMAP 3006C/3010C:

1. Press and hold the POWER key.

If one chartplotter is connected, the unit shuts down. If multiple chartplotters are connected, a prompt appears.

2. Select Yes to turn off the entire network, or select

No to put the unit in sleep mode.

3. Press ENTER.

Map Page

Using the Main Menu

To change a setting using the Main Menu:

1. From any page, press and hold ADJ/MENU to open the Main Menu.

2. Use the ROCKER to select a tab, and then press right or left on the ROCKER to select a sub tab.

3. Highlight the field you want to change, and press ENTER.

4. Make any changes, and press ENTER.

5. Press QUIT to return to the main page.

Main Menu

Viewing Main Pages

The GPSMAP 3006C/3010C contains five main pages. Additional main pages appear as you add optional hardware to the Garmin Marine Network. Press PAGE to view each page.

Map Page

Compass Page

Map Split Page

3D Highway Page Video Page (Optional)

Adjusting the Backlight

To adjust the backlight level:

1. Press and release the POWER key.

2. Press up or down on the ROCKER to adjust the backlight level.

3. Press ENTER to quit.

Highest Selectable Lowest

Using the GPSMAP 3006C/3010C Keypad

POWER/BACKLIGHT—press and hold to turn the unit on or off. Press and release to adjust the screen backlighting.

RANGE—press to zoom in or out of the Map Page and Highway Page, or adjust the range of the sonar or radar.

ROCKER—press up, down, right, or left to move through lists, highlight fields, select options and locations, enter data, or move the map pointer.

PAGE—press to cycle through the main pages in sequence or return from a sub page to a main page.

QUIT—press to return to a previous page, restore a data field’s previous value, or exit out of menus.

ENTER—press to select highlighted fields, confirm menu options, or enter data.

MARK—press and hold for two seconds to capture your current location and open the Review Waypoint Page.

ADJ—press to show available options and features for the current function.

MENU—press and hold to open the Main Menu.

NAV—press and release to access navigation options.

MOB (Man OverBoard)—press and hold to mark your current location and instantly set a return course.

DATA—press to show or hide function windows and data fields on a main page.

CNFG—press and hold to open the Configuration window to customize a main page.

FCTN—press to highlight the next available Function window on the split screen.

FIND—press to initiate the Find option, so you can search for user points, map items, and any optional data card information.

190-00371-01 Rev. F © Copyright 2004 – 2006 Garmin Ltd. or its subsidiaries Printed in Taiwan