Magnastat Soldering Iron
Magnastat Soldering Iron
The Magnastat system operates through a ferro-magnetic senor device which changes its characteristics whe specific
temperatures are reached. This causes it to either attract or repel a permanant magnet which operates a power supply switch. In this way power to the heating element can be quickly switched on or off to either provide extra power.
Magnastat Controlled Low Voltage Soldering Iron
TCPS
50 W, 24 V
3 wire silicone cord and
plug for Weller WTCP 51
Magnastat soldering station.
Hard grounded
LT Soldering tip series
page 165-168
Order-no. Model T00 532 105 99 TCPS Description
Magnastat Soldering iron 50 W, 24 V
with adapter PT 7 (370°C) and soldering tip LT M
TCP 24
50 W, 24 V
2 wire silicone cord without plug
No grounding possible
LT Soldering tip series
page 165-168
Order-no. Model T005 10 001 99 TCP 24 Description
Magnastat Soldering iron 50 W, 24 V,
with adapter PT 7 (370°C) and soldering tip LT M
TCP 42
45 W, 24 V
2 wire cord (4 m) without plug
LT Soldering tip series
page 165-168
Order-no. Model T005 10 055 71 TCP 42 Description
Magnastat Soldering iron 45 W, 24 V,
with adapter PT 7 (370°C) and soldering tip LT M
TCP 12
3 m cord with battery
clamps e.g. for car battery
LT Soldering tip series
page 165-168
Order-no. Model T005 10 053 99 TCP 12 144
Description
Magnastat Soldering iron 30/40 W, 12/14 V,
with adapter PT 7 (370°C) and soldering tip LT M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising