Beseler Topcon Auto100 camera manual

Beseler Topcon Auto100 camera manual
Beseler Topcon Auto100
posted 4-27-'03
HTML Translations - German - Italian - French - Spanish - Others
These links will not translate any PDF files
This camera manual library is for reference and historical purposes, all rights reserved.
This page is copyright© by M. Butkus, NJ.
This page may not be sold or distributed without the expressed permission of the producer
I have no connection with any camera company
On-line camera manual library
If you find this manual useful, how about a donation of $3 to: M. Butkus, 29 Lake Ave., High Bridge, NJ 088291701 and send your e-mail address so I can thank you. Most other places would charge you $7.50 for a electronic
copy or $18.00 for a hard to read Xerox copy.
This will allow me to continue to buy new manuals and pay their shipping costs.
It'll make you feel better, won't it?
If you use Pay Pal, use the link below. Use the above address for a check, M.O. or cash.
Back to main camera manual page
BATTERY INFO - It's not stated in the manual
At least two Topcon models (the Super DM and the 135EE) required the 1.35 volt PX-13 mercury battery (also known as
the PX-625.) This battery is no longer available however there are several options discussed in our article "Overcoming
the Mercury Battery Ban" (hyperlinked below.) The least satisfactory choice is using the alkaline PX-625A - it will lead to
underexposed pictures unless you modify your exposure or film speed setting.
One Topcon resource which may know the answer is The Topcon Collection
1. Set film speed (ASA 25 to 400 or DIN 15 to 27).
2. Set shutter speed (1/8 to 1/500 see.).
3. Set aperture ring to AUTO.
4. Advance film winding lever.
5. View-focus through the lens, and check aperture reading.
6. Press shutter release button.
1. Don't touch the surface of the lens, mirror, eyepiece, as well as exposure window.
2. Stroke the film winding lever all the way- until It stops.
3. Wait until the shutter action is completed before stroking the film winding lever.
4. Cover the lens when not In use.
5. Don't force movements but retread instructions once more.
6. If your BESELER TOPCON AUTO 100 camera needs repair, don't do it yourself but contact the nearest authorized
SELF TIMER .... 17
FOCUSING .... 18
STORAGE & CARE .... 50
Congratulations, on your choice of the BESELER TOPCON AUTO 100 camera which has been designed by our
engineers and optical scientists to give an ideal camera fulfilling the following basic requirements:-1. Single lens reflex--for viewing and focusing of the exact subject image as it will be captured on the film.
2. Electric Eye automation--for automatically setting the correct exposure to the camera simply by pointing it at the
3. Complete lens interchangeability--for changing from the standard to the wide-angle or telephoto as the requirements of
the picture may demand.
4. Superior UV lens coating--for producing crisper black-and-white shots and true-to life color pictures.
But, besides these basic requirements, the camera also incorporates all the complicated mechanism that make picturetaking completely automatic, such as:-1. Fully automatic instant re-opening lens diaphragm action--for holding the lens at wide aperture, for view-focusing ease,
but stopping it down automatically to the selected aperture for the shutter action and then re-opening it once more to wide
2. Quick-as-a-wink mirror action--which, in coupled action with the automatic lens diaphragm action, swings the mirror
up and out of the way for shooting and then snaps it down once more, quick-as-a-wink, for view focusing.
3. Single stroke film winding lever action-- not only advances the film one frame, but advances the exposure counter,
charges the shutter and sets up the automatic lens diaphragm action.
4. Automatic re-setting additive exposure counter.
5. Automatic pop-up rewind button.
And, as an additional bonus, the camera also has:-1. Complete electric eye automation with all interchangeable lenses.
2. Special UV filter effect on all interchangeable lenses.
3. Aperture scale visible in finder, even with electric-eye automation.
4. Manual over-ride of electric-eye automation for shutter coupled exposure settings or complete freedom in exposure
In other words, the camera is the ideal family camera because it can be used by every member of the family, from the
person who only wants an automatic camera to take care of all exposure setting problems, the person who wants a built-in
exposure meter coupled to the camera for some freedom to adjust exposures, the person who wants a camera with a choice
of wide angle or telephoto lenses, which are not auxiliary lenses or which leave behind some component and merely
exchange the front elements, to the person who would just rather set exposures according to experience,--because the
camera is not a simple automatic camera but a well-built and designed camera which will satisfy even the demands of the
advanced amateur.
While operation is very simple, may we suggest that you read the instructions through carefully so that you familiarize
yourself with its working parts before you even load film in the camera.
Lens: UVTopcor 1:2 f-53mm 6 element standard lens. Fully automatic instant re-opening lens diaphragm. Straight
helicoil focusing from 70cm to infinity.. Bayonet mount lens interchangeability of complete lens. Apertures: f/2, 2.8, 4,
5.6, 8, 11, 16 and 22.
Shutter: SEIKOSHA SLV behind-lens type.
Speeds: B. 1, 1/2, 1/4, 1/8, 1/15, 1!30, 1/60, 1/125, 1/250 & 1/500 sec. MXV-switch (for M and X settings flash
synchronization and self-timer).
Finder: Fixed eye-level Pentaprism finder, with 0.75X image (standard lens), and 34.5 X23mm finder screen. With
TOKOBRITE fresnel lens plate and micro-prism focusing spot. Meter needle and aperture scale, indicates aperture
Exposure: AUTO--Electric-eye automation. Range: EV 5 to EV 18, with ASA 100 film.
Film speeds: ASA 25 to 400 (DIN 15 to 27). Shutter speeds: 1/8 to 1/500 sec.
COUPLED--Shutter coupled exposure setting. Range: EV 5 to EV 18, with ASA 100 film. Film speeds: ASA 25 to 400
(DIN 15 to 27). Shutter speeds: 1/8 to 1/500 sec.
MANUAL--Complete freedom in apertures/shutter speeds. Range: EV 2 to EV 18, with ASA 100 film. Film speeds: ASA
25 to 400 (DIN 15 to 27). Shutter speeds: B. 1 to 1/500 sec.
Film Winding: 180 ° single stroke.
Other Features:
Red warning area indicating automatic exposure is not possible (shutter may be released).
Wink mirror system (instant return mirror action).
Automatic pop-up rewind button.
Fixed accessory shoe.
Size & Weight:
With standard lens: 136mmX93mmX84mm; 840 grams.
(1) Film winding lever
(2) Exposure counter scale
(3) Exposure counter index
(4) Rewind knob
(5) Rewind crank
(6) Shutter release button
(7) Shutter speed ring
(8) Aperture ring
(9) Depth of field scale
(10) Infrared index
(11) Distance [aperture) index
(12) Distance scale
(13) Distance focusing ring
(14) Film plane indicator
(15) Eyepiece
(16) Accessory shoe
(17) Shoulder strap lug
(18) Back cover lock
(19) Rewind button
(20) Film speed scale
(21) Film speed
adjustment catch
(22) Film speed index
(23) Lens locking lever
(24) Tripod socket
(25) Film Carthage shaft
(26) Film take-up spool slit
(27) Film take-up spool serrated flange
(28) Film transport sprocket
(29) Film pressure plate
(30) Back cover lock
(31) Bock cover catch
(32) Flash socket
(33) MXV-switch
(34) Battery cover
One of the most important factor for taking better pictures is correct exposure, which is the relationship between-1. The shutter speed, and
2. The aperture (lens opening), as decided by
3. The brightness of the subject, and dependent on
4. The sensitivity (speed) of the film loaded in the camera.
In other words, it is important to be able to correctly judge the brightness of the subject, in order to determine the correct
aperture to be used, because film speed is pre-determined by the film used and shutter speed is, more often than not,
decided by the action of the subject
In the BESELER TOPCON AUTO 100 camera three methods of setting the correct exposure adjustments to the lens and
shutter are possible--
1. Electrrc-eye automation.
2. Coupled exposure setting.
3. Free exposure setting.
Presuming that the film is already loaded in the camera and the film speed set to the camera, the only actions required for
taking pictures are:-1. Set the shutter speed ring (7) to one of red-colored speeds 1/500 to 1/8 sec., by revolving the ring until the required
speed is opposite the index. The shutter speeds will click-stop into place. Use the shutter speed guide for choosing the
most suitable speed for the lighting condition or action.
2. Set the aperture ring (8) to AUTO, which will set the electric-eye system into operation.
3. Check the aperture seen on the left border of the finder and if the exposure needle is not in the red warning areas and is
satisfactory, press the shutter button (6), and the picture will be taken. If the exposure needle is in the top red area, the
picture will be under-exposed, while, if in the bottom red area, the picture will be over-exposed. If the former, revolve the
shutter speed ring to the left, and, if the loser, to the right, which will have the affect of moving the exposure needle
towards the middle area, in both cases, where the picture can be taken.
When revolving the shutter speed ring, in the above instances, do not move the shutter speed scale outside the 1/500 to 1/8
sec. range.
The shutter can be released even when the noodle is in the red areas so the position of the needle must always be checked.
Of course, it is taken for granted that the film winding lever is also advanced, as well as view focusing being undertaken,
before the shutter is released.
When the subject has too much contrast, or the bock-light is brighter than the front-light, or if you want to take a close-up
reading and then move back for the shot, or other wise want to adjust the aperture setting to take into account possible
over- or under-over exposure on electric-eye automation, try coupled exposure setting:-1. Set the shutter speed to one of the rod colored shutter speeds, i.e., f ram 1/500 to 1/8 sec., the same as for electric-eye
2. Take the aperture ring off AUTO, by revolving it to any other setting on the ring.
3. Point the camera lens at the subject and read the aperture setting
indicated on the aperture scale in the finder.
4. Transfer the aperture reading to the aperture ring, i.e., revolve the
aperture ring until the same aperture is opposite the index (11), or
modify it and then transfer it, if this is preferred.
5. Press the shutter release button.
Incidentally, if the exposure needle is in the red warning areas,
revolve the shutter speed ring, in the same manner noted for electric
eye automation, but within the range 1/500 to 1/8 sec., and find the
right combination of shutter speed and aperture.
Coupled exposure setting is suitable for those shots in which-1. The background is very light and covers a greater area than the main subject of interest, which is also darker; because
the exposure reading will be dominated by the lighter background and the main interest will be under-exposed. For
example, shots against distant scene, or against snows capes, etc.
2. The opposite of the above, such as in night clubs, circuses, etc., in which the reading will be dominated by the darker
background and the main interest will be over-exposed.
3. The main subject is back-lighted, because the subject's face will not be illuminated by the main light and will be underexposed, if the reading is taken for the full subject area.
4. The main subject is in the shade, because the reading will again be dominated by the surrounding light and will thus be
For the above shots, as well as for other shots, the exposure reading should be taken as follows:-1. Landscape: Shield the camera taking lens (34) f ram the light reflected by the sky and point it so that it will be taking a
reading of an area having less sky than the general overall scene, because the sky is much brighter than the general scene
and if too much sky is included the overall effect will be over-exposure.
2. Subject against the open sky: When shooting airplanes, flags, buildings, etc., against an open expanse of sky, take an
exposure reading of a similar object with the light striking it at the same angle as the subject and modify it by 1/2 stop
3. Contrasty subject: First decide what effect you are looking for in the final picture and take an exposure reading of the
portion which interests you the most, letting the contrasty portion (lighter or corker portion) get lighter or darker, as the
case may be.
4. Inaccessible subjects: If the subject is too far off, take an exposure reading of a similar subject i.e.., same texture and
lighting condition) at close distance.
5. Back lighted subject: The best method is to move in and take a close-up exposure reading of the front-lighted subject
area only, using care to see that the bock-light does not effect the reading. Otherwise, modify the exposure reading taken
at the picture-taking position 3 or 4 times to take into account the excessive contrast between the back-light and the frontlighted area.
6. Portrait: Move in close and take a reading of the face area that should stand out in the final picture. If contrast is
extreme, between the high-lights and shadows, take a reading of both portions and average it, if you want both portions, or
otherwise take a reading of the interesting portion at about 4 inches or so. See that the camera's shadow is not cost on the
area being read.
(1) When using the f/3.5 wide angle or f/4 telephoto lenses, it is not possible to take shots at larger apertures than the
maximum aperture of the lens attached to the camera. Thus, if the exposure needle indicates a reading of f/2 or f/2.8, etc.,
the shutter speed ring should be revolved to a slower speed, in order to bring the needle within maximum opening of the
lens used.
(2) When using film other than ASA 100 and 200, the exposure reading can be unusable even when the exposure needle is
not in the red warning areas. This is especially when a fast Elm is used at a slow shutter speed, or o slow film used at the
fastest shutter speed. The following combinations of shutter speed and f stops should never be relied upon for setting
ASA 400 film - f/2 & 1/8 sec.
ASA 50 film f/22 & 1/500 sec.
ASA 25 film f/16 & 1/500 sec.
(3) To use a shutter speed slower than 1/8 sec., use the aperture reading for 1/8 sec. in order to take a reading. Then readjust, by stopping down the lens diaphragm by the same number of steps as the exposure time is increased, as follows:-Shutter speed:
4-- 5.6 -- 8 --11
Although only full numbers are used on the ring, it should be remembered that 500 is 1/S00 sec., and 1 is a full 1 sec. and
that, therefore, the larger number is the faster speed, meaning that the shutter remains open only for a 1/500 sec. duration
during which time the light passes only 1/2 as long as the preceding larger number and vice versa; thus if lighting
conditions remain unchanged, decreasing the speed will mean that the aperture will have to be opened to compensate for
less light.
The choice of shutter is dependent on the lighting condition, as well as the need for stopping action. The brighter the light,
the faster the speed that may be used, and vice versa. On the other hand, for stopping action, it should be noted that (1) a
faster speed is required for a speedier subject, (2) a faster speed is needed for movement nearer to the camera, (3) a faster
speed is required for a subject moving parallel to the camera, while a slower speed may be used for movement towards or
away from the camera, and (4) the degree of stopping required will also determine the speed to be used.
The aperture ring has apertures or openings, called f/numbers, with exposure ratios, as follows:-Aperture
Exposure ratio
The aperture or lens opening controls the amount of light that enters the lens and passes through to the film plane, by
adjusting the lens opening as required. It can be seen that the larger numbers are the smaller openings and vice versa and
that each smaller aperture permits only 1/2 the amount of light of the preceding larger aperture and that, therefore, if
lighting conditions remain unchanged, stop ping down will require a corresponding increase in the shutter speed.
In other words, if the shutter speed is originally set to 1/60 sec. for f/8, then it must be increased to 1/125 if the aperture is
opened to f/5.6 or to 1/30 if the aperture is stopped down to f/ 11.
Exposure settings in this case will have to be decided by:
1. Using o suitable exposure meter, or,
2. Using an exposure chart, such as is usually included with the film, or,
3. Making your decision based on post experience.
Since all the UV TOPCOR lenses are equipped with the fully automatic lens diaphragm action, the lens opening is always
opened at the widest aperture for view-focusing ease. This means that the lens diaphragm must automatically close down
to the required opening when the shutter button is pressed, and then open immediately back to the widest aperture
--but, besides this, there are various other related actions which all take place in less than l/10th of a second when the
shutter is pressed, such as:-1. The shutter blades close down completely.
2. The reflex mirror rises, the film blind opens fully and the lens diaphragm is stopped down.
3. The shutter blades open and close (for taking the picture).
4. The film blind opens, the mirror returns to reflex viewing position, and the lens diaphragm opens fully.
5. The shutter blades open fully.
The action of the lens diaphragm is the result of the "fully automatic instant re-opening lens diaphragm action", while that
of the reflex mirror is the product of the "quick-as-a-wink mirror action", both of which are required to produce the fast
action required for taking the picture without loss of image.
When using slow shutter speeds, always wait until the shutter action is finished before advancing the film winding lever.
For the purpose of delaying the actual shutter release action for 10 sec., after the shutter release button is pressed, use the
built-in self-timer. After all preparations for taking the exposure have been completed, shift the MXV-switch 133) until V
is aligned with the index, and then press the shutter release button as usual.
By utilizing the self-timer, it will be possible to take your own photograph, or hold lighting equipment or reflector, or used
it for minimizing camera vibration on the tripod.
Even when the self-timer is used, Electric-Eye automation takes place and the correct exposure for the lighting condition
when the shutter is released is set to the camera.
Always return the MXV-switch to X-setting when not in use.
When using the camera on the tripod, etc., use a cable release screwed into the shutter release socket, instead of pressing
the shutter button, as it will eliminate camera vibration.
Two other important factors for getting bettor pictures are:-1. Correct composition of the subject within the film negative area, and
2. Accurate focusing of the image on the film plane.
In the BESELER TOPCON AUTO 100 camera both these factors are taken care of by single system, i.e., view focusing
through the camera lens.
Since the reflected light from the subject, which passes through the camera lens to the film plane for taking the picture, is
intercepted by the reflex mirror, which is placed in the light path, and reflected upwards to the finder's focusing screen:-1. Parallax is completely eliminated, because the viewing and taking lens are the same, and you can compose exactly as it
will be taken in the picture, and
2. The same area seen in the finder will be covered in the final picture.
Furthermore, the eye-level Pentaprism finder, which reverses the laterally reversed image reflected upwards by the reflex
mirror, gives the following advantages:-1. A right side up laterally correct image, moving in the same direction as the actual subject, is especially valuable for
moving subjects.
2. Because of the erect laterally correct image, both eyes can be used, one for looking through the finder and one for
viewing the general scene.
3. Eye-level viewing also means correctly lateral and erect images in vertical formats.
Since view-focusing is through the camera lens, all focusing adjustments are made directly on the lens itself by revolving
the distance focusing ring (13). and checking the effect on the focusing screen in the finder.
The focusing screen has:-1. A micro-prism focusing spot.
2. A fine focus ring, around the spot.
3. A full-area ground glass, boosted by fresnel lens.
Micro-Prism Focusing Spot:
The focusing spot in the center is made up of numerous microscopic
prisms which break up the image when it is not in focus so that the image
is seen indistinct and blurred. When the distance focusing ring is revolved
and the subject is accurately focused, the image in the focusing spot will
be seen distinctly and sharply.
Subjects with linear features will be particularly effective for focusing
because the straight lines will look ragged and broken up when out of
focus but will be seen straight when in focus.
When in doubt, revolve the distance focusing ring either ways from what is considered optimum focusing and check the
Fine Focus Ring: Around the micro prism focusing spot can be seen a clear ring which is made of extra-fine ground glass
only. This ring may also be used, either singly or in combination with the focusing spot, for focusing of subjects without
linear features.
When the distance ring is revolved and the subject is correctly focused, the finder image will be seen distinctly and
sharply, while, if focusing is not correct, the subject will be seen blurred and indistinctly. As with the focusing spot,
revolve either ways of the optimum focus to check whether focusing is correct or not.
Full-Area Ground Glass: The full-area of the focusing screen, except for the focusing spot and fine focus ring, is fine
ground glass backed by a fresnel plate lens for obtaining a brilliantly illuminated subject field from edge to-edge, without
dark corners. In other words, the whole subject area is always distinctly seen and may be focused on the full ground glass
Focusing is done in the same manner as for the fine focus ring and focusing spot.
For speedier focusing, use the full focusing screen, combining all the focusing means, i.e., focusing spot plus fine focus
ring plus full ground glass, because it will also mean that composition and focusing can be undertaken at the same time.
The distance actually focused can be checked by reading the distance scale (12) opposite the distance index (11).
When you have focused on a certain subject (plane), it will be
seen that not only that subject but other subjects, both in front
and behind the main interest, will also be seen sharply,
although this will not be true for everything before or behind
the main interest.
In other words, when a subject has been focused at a certain
distance, the lens presents an apparently sharp image not only
at the focused distance but also at somewhat farther and
nearer distances. This zone of apparent sharpness is known as
the depth of field and the rules governing the extent of the
depth of field are:--
1. The depth of field is greater as the diaphragm (aperture) is closed down, and least as the diaphragm is opened up. In
other words, the wide-open aperture of the fully automatic lens always shows the least depth of field and is valuable for
precise focusing.
2. The depth of field is greater as the focused distance increases and least as the camera-to-subject distance decreases.
3. The depth of field is greater behind the focused subject (in the background) and shallower before the focused subject (in
the foreground) but grows progressively equal as the focusing distance gels shorter.
4. The depth of field increases when the UV TOPCOR 35 mm wide-angle lens is attached and decreases when the UV
TOPCOR 100 mm telephoto lens is used, both in comparison to the standard UV TOPCOR 53 mm lens.
The depth of field of the lens can be utilized for getting pictures with backgrounds or foregrounds out of focus, or for
getting subjects in the foreground and background sharply, or for covering the deepest possible range in action shots, etc.
Depth of Field Scale: The depth of field scale (9), on the lens barrel, is utilized for checking the scope of the depth of field
because it shows at a glance the zone of apparent sharpness at any lens opening or distance.
The depth of field scale is next to the distance scale (12) and is made up of identical pairs of apertures on both sides of the
distance index ( 11 ), which also represents the widest aperture of f/2. These identical pairs of apertures indicate the
distance that will be in focus at these lens opening.
1. Finding the depth of field: example, if the lens opening is f/11 and the distance focused is 10 meters (as in the
illustration), read the distances opposite the aperture f/11 (the line between 8 and 16) on both sides of the depth of field
scale which will show that the depth of field extends from approximately 4.5 meters to infinity. On the other hand, if
greater depth of field is required, see which lens opening will cover the required field. If, for example, the zone should
extend from 3 meters, it will be seen that f/22 will give the required depth of field which will be from about 3 meters to
infinity.. Of course, shutter speed will have to be decreased to compensate for the reduction in the effective amount of
2. Zone focusing: When it is required to cover two subjects at different distances from the camera, first focus on the
nearest subject, for example, 2 meters, and then the farther subject, say, 5 meters, both found with the distance scale. Next,
revolve the distance focusing ring until these distances are opposite identical apertures (approx. f/16, in this case) and use
this lens opening for the shot.
3. Fast zone focusing: When there is not enough time for finding the two limits for the above zone focusing method, focus
on a subject about two fifths of the way into the required zone of sharpness and choose an aperture which will give
sufficient sharpness over the whole field.
Increase the depth of field, whenever possible, by stopping down the lens opening rather than by increasing the focusing
distance, or by using the UV TOPCOR 35 mm lens.
Depth of Field Table: For greater accuracy in the depth of field, because the depth of field scale figures are in round
sums, use the depth of field tables on pages 23 to 30.
In all instances, measure the distances from the focal or film plane (indicated by the marking (14) on the camera's top
deck) to the main subject.
For critical pin-point sharpness, always use wide aperture and focus on the main plane, because everything within the
depth of field is not of equal sharpness but, on the contrary, grows less sharp as it gets farther from the plane of focus.
Topcor F/2 53mm
Topcor F2 53mm
Topcor F/4 135mm
Topcor F/4 135mm
Topcor F/4 100mm
Topcor F/4 100mm
Topcor F/3.5 35mm
Topcor F/3.5 35mm
For infrared photography, infrared film is used which is
sensitive only to the blue-violet infrared wave lengths
whereas panchromatic film is sensitive 10 all the colors of the
Since focusing is done with the visible point, seen in white
light, some focusing adjustment must be made because the
infrared wavelengths are longer in wave lengths and not
visible to the naked eye. The infrared index (10) is the red
line representing f/4 opening on the depth of scale, which
should be used for making such adjustments.
In other words, once focusing has been done in the regular
manner (say, the distance is 10 meters), shift the distance
obtained to the infrared index, as in the illustration.
For infrared photography, use a suitable red filter and read the instructions, enclosed with film, for determining exposure
Another important factor for obtaining superior pictures is the proper support of the camera, not only to provide a steady
and comfortable position for holding the camera but also one that will permit speedy handling for taking successive
Horizontal Holding Position:
This is the holding method for taking pictures in the horizontal format, which is the most common. Take a firm grip on the
distance focusing ring (13), with the left thumb and left forefinger, resting the camera body on the palm of the left hand.
Next, place the right thumb against the film winding lever (1), with either the right forefinger or middle finger on the
shutter release button (6) and the rest of the hand cradling the right side of the camera body. The right hand will advance
the film and take the picture, aiming the camera at the same time, while the left hand will do most of the holding and also
take care of focusing.
The camera should be raised to the right eye, leaving the left eye free to take in the whole field. The elbows should be
pressed against the body for support and the camera should also be pressed against the forehead to minimize camera
Vertical Holding Position:
Without changing the basic holding position for the horizontal format, turn the camera around until the film winding lever
is topmost. Now the left side of the camera body will be supported by the left hand. The right elbow will not be pressed
against the body but will jut out into space, not giving any support to the camera; but this version is superior to turning it
around the opposite way because the winding lever can still be used for speedy action.
To keep camera shake at a minimum:-1. Spread the legs wide apart for body steadying purpose. Use the body or as much of it as possible for steadying the
camera, such as digging the elbows into the body, pressing the camera against the forehead, etc.
2. Don't tense the fingers but hold the camera firmly and leave the fingers free to do their work.
3. Don't jerk or strongly press the shutter button but press it smoothly and gently.
4. Whenever possible use the tripod, especially at the slower shutter speeds 1/15 sec. and slower.
5. Use props, like desk, chair, tree or anything that does not move, when the tripod cannot be used.
6. Pull the neck strap taut, looping it around the wrist, if necessary, to brace the camera against the body.
Use 35 mm film in daylight
cartridges which will give either 20
or 36 exposures of 24 mm X 36 mm
size black-and-white pictures.
There are also colors films of 12, 20
and 36 exposures in the same size.
Load and unload films away from direct sunlight or strong artificial illumination, although it will not be necessary to get
into a darkened room. Get in the shade, whenever possible, even if it is your own body shade, and place the camera on the
table or lap so that it will not be dropped accidentally.
Opening Camera:
1. Shift the back cover lock (18) and press it strongly. The back cover will spring open, and, therefore,
2. Pull it open all the way.
Loading Camera:
3. Pull up the rewind knob (4), as
far as it will go, and insert a fresh
film cartridge into the empty film
chamber. The leading end of the
film should be pointed in the
direction of the take-up spool slit
4. Push the rewind knob back down into position. If it does not catch the film cartridge, revolve the rewind knob slightly
until the slot on the film cartridge shaft (25) catches.
5. Pull out the film about 14-15 cm from the cartridge and insert it as deep as possible into the take-up spool slit (26). If
the slit is not visible, revolve the take-up spool, with the serrated flange (27) until the slit is topside.
6. Check whether the bottom perforation of the film engages the teeth of the film transport sprocket (28) and advance the
film winding lever (1) carefully, checking once more whether the top perforation are also fully engaged.
Closing Camera:
7. If the top and bottom perforations are fully engaged, close the back cover by pressing it tightly until it catches and does
not open.
8. Slowly turn the rewind knob (4), in the direction of the arrow engraved on it, which will tension the film inside the
cartridge. Each film winding lever action will now revolve the rewind knob counter-clockwise, thus indicating that the
film is being advanced properly.
Advancing the Film:
9. Push the film winding lever with thumb of the right hand until a full stop is made, as otherwise the shutter button
cannot be pressed.
Each film winding lever action takes care of the following actions:-1. The film is advanced one frame.
2. The exposure counter is advanced one frame.
3. The shutter is charged.
4. The automatic lens diaphragm mechanism is set up for action.
10. Press the shutter release button (6).
11. Repeat actions (9) and (10) once more. The two blanks shots just finished will mean that two frames have been
advanced and that the next film winding action will place the third frame into position for actually taking the first shot.
The two blank shots are required because the first two frames are usually exposed in film loading.
For keeping track of the number of exposures taken, the BESELER TOPCON AUTO 100 camera has an automatic
exposure counter (2) which works automatically with the opening and closing of the camera's back cover. In other words,
whenever the back cover is closed, the exposure counter automatically returns to the starting mark "S".
The two blank shots made in loading the film puts the exposure counter on the second white dot, indicating that the next
film winding action will place the counter on " 1".
The counter has numerals 1...5...10...15, indicating every fifth shot, up to 35 exposures, with white lines in between to
show each shot.
The numeral 20, as well as the line after 35, are red-colored, to show when the 20 or 36 exposure film is all exposed.
Upon loading the film, the film speed index should be set to the proper Elm
sensitivity [speed) of the film loaded in the camera, because it is of prime importance
for obtaining correct exposure.
Pull the film speed adjustment catch (21), on the shutter speed ring knob (7),
outwards, which will free the film speed scale, and revolve the ring to sot the
required film speed to one of the following three indexes:-2 be used for the f/2 standard lens be used for the f/3.5 wide-angle lens 4 be used for the f/4 telephoto lenses
There are 13 click-stopping ASA film speeds from 25 to 400, with the dots between numerals indicating intermediate film
Check instructions enclosed with the film for the correct film speed, and if speeds other than ASA are indicated, use the
following conversion table for finding the corresponding ASA film speed.
After the last exposure is taken, the film should be returned to its
cartridge and then taken out for development.
When the exposure counter indicates that the last exposure has
been made, do not advance the film any more or you will tear it or
pull it out of its cartridge.
In any case, if the winding lever does not move easily, check the
exposure counter to see whether it is the last exposure or not. If so,
do not advance the winding lever but leave it half-advanced, as it
is, and proceed with rewinding the film.
At any rate, don't open the back cover, at this time, or you will ruin your exposed film.
1. Depress the rewind button (19) strongly.
2. Unfold the rewind crank (5) from its storage position and revolve it clockwise, in the direction of the arrow. Rewind
smoothly and at an even speed BECAUSE erratic or too rapid rewinding may cause static electricity marks on the film.
3. Rewind until tension lessens as the film end slips out of the take-up spool and then stop rewinding. Do not rewind the
leading end back into the cartridge but leave the tip protruding.
4. Open the back cover, as already noted.
5. Pull up the rewind knob and lift out the cartridge.
6. Bend the end of the film (as a sign that the film has been exposed) and place it in its original package until
The rewind button may be left depressed because the next film winding lever action will automatically pop it up.
Besides the standard lens which is supplied with the camera, three other lenses are available separately and may be used
interchanged with the standard lens.
All UV TOPCOR lenses have been specially designed for use on the single lens reflex camera and are not inferior to, if
not superior to, other more expensive lenses found in focal plane shutter cameras in its resolving power and rendition.
All UV TOPCOR lenses have been specially coated to cut the ultra-violet (UV) rays and thus give breath-taking true-tolife color renditions of outdoor scenes at all times, and eliminate the need for an UV filter outdoors for black and-white
camera work.
All UV TOPCOR lenses are straight helicoid focusing and incorporate the electric-eye automatic exposure system, the
fully automatic instant re-opening lens diaphragm action, as well as being coupled with the quick-as-a-wink mirror action,
and, moreover, are fully interchangeable, without any lens element being left behind in the camera, nor are they simple
auxiliary lenses which are attached to the front of the standard lens.
An exclusive bayonet mount permits simple, accurate and speedy exchange of the lenses, while the SEIKOSHA SLV No.
00 shutter is incorporated behind-the-lens, in the body.
Standard Lens:
The standard UV TOPCOR lens is a 553 mm focal length optic, with a fast speed of f/2, and has 6 elements in 4 groups.
The lens focuses down to a close distance of 70 cm.
Wide-Angle Lens:
The UV TOPCOR wide-angle lens has a shorter-than-standardfocal length of 3S mm, and a speed of f/3.5. The lens
construction is 6 elements in S groups, and the minimum
focusing distance is 40 cm. The lens covers a wider field of view,
than the standard lens, at the same camera-to-subject distance,
and shows an image which is much smaller and a depth of field
which is much deeper.
The wide-angle, because of these characteristics, is used for
shooting where it is not possible to back up, such as in
architectural shots, interior shots, groups in small rooms, etc., as
well as for candid shots (because of the deeper depth of field) and
exaggerated perspective shots (because of its wide field of view).
Telephoto Lenses:
The UV TOPCOR telephoto lenses when compared to the standard lens, cover a more narrow field of view, show a
smaller picture area, a larger image pulled in closer and a shallower depth of field. The lenses are thus, used for shooting
distant objects, which cannot be approached close enough to isolate and emphasize, and for portraiture because of their
natural perspective and because their shallow depth of field eliminate distracting backgrounds.
Both telephoto lenses have 5 elements and a maximum aperture of f/4, but the shorter is 100mm in focal length and
focuses down to 1.5 meters, while the longer lens has a 135mm focal length and focuses down to 1.7 meters. The former
has a 24° field of view and the latter a 18° angle.
Removing the Lens:
Press the lens locking lever (29), which will disengage the lens
locking system. Rotate the lens counter-clockwise until it stops,
release pressure on the lens locking lover and continue rotation
until it makes a full stop again. Then lift it out gently.
Attaching the Lens:
Line up the red dot, that serves as the distance index (11), with the red dot on the body flange and insert the lens carefully.
When well-seated, revolve clockwise until it stops and clicks into position.
Lens Covers:
When not in use, protect the lens surface with the lens cap. Cover the rear ends of lenses detached from the camera with
rear lens coos.
When available light is not sufficient for taking pictures at the desired aperture or
speed, or if there is a total lack of illumination, or if the subject is in the shadow
and details are obscured, use artificial illumination, such as photo lamps, flash
bulbs or electronic flash.
As a portable and economical method of artificial illumination, simply mount a
flash unit in the accessory shoe (16) on top of the Pentaprism finder, and insert
the flash cord plug into the flash socket (32). Larger units should be used with a
suitable bracket.
The bracket should be fixed to the bottom of the camera, with the fixing screw
locking it to the tripod socket (24).
Flash Illumination:
The various types of flash bulbs which may be used with the flash unit are classified according to their time-to-peak
(firing delay) or the time it takes from contact until peak brightness is reached. Class M and Class F bulbs, as well as
electronic flash, can be used with the BESELER TOPCON AUTO 100 camera.
1. Class F: The firing delay is 4-6 milliseconds. Although light output is low, the stopping action is a fast 1/200 sec. 2.
Class M: The firing delay is 16-18 milliseconds. The light intensity is very great and, therefore, it is used when maximum
light output is necessary.
In this class are included the small miniature flash bulbs and all-glass (AG) no base flash bulbs, both of which give great
light output inspire of their very small sizes.
3. Electronic Flash: There is no firing delay with electronic flash or strobe-lights. The intensity is not very great but they
may be re-used many times, after a suitable re-cycling period. Of course, the initial outlay is comparatively expensive and
is only suitable for those users who require artificial illumination quite often. The speed is a very fast 1/500 or 1/1000 sec.
or better, stopping most actions.
Flash Synchronization:
Since the flash bulbs and electronic flash units, which can be used with the BESELER TOPCON
AUTO 100 camera have different firing delays, the shutter action must be synchronized so that it will fire the bulb by
closing the flash contact at the appropriate moment for the time-to-peak of the bulb being used.
Two settings, M-setting and X-setting, are built into the camera to take care of flash synchronization when Class M and
Class F flash bulbs, as well as electronic flash units, are used. Simply shift the MXV-switch (33) to M or X, and the flash
circuit will be set up for use of the various flash bulbs and electronic flash. The shutter speeds that may be used when the
various flash illuminations are used at either of these settings are shown on the following table.
V-setting is for use of the self-timer; flash synchronization will only be possible on X setting when the self-timer is used.
Flash Exposure:
In flash photography, do not use the exposure meter because it will not work. Consequently, take the aperture scale off
In flash photography with the flash unit on the camera accessory shoe, the distance focused will be of great Importance for
calculating the correct aperture, because the brightness of light decreases with the square of the distance, or, in other
words, an object 2 meters away will receive only one-fourth the light of an object 1 meter away.
Find the guide number for the bulb being used (usually found in the instruction sheet furnished with the flash bulb and
based on the shutter speed and film speed being used), and divide it by the distance from the flash to subject, which will
give the correct aperture. For example, the guide number is 50 and the distance 3 meters from flash unit to subject, the
aperture will be f/16. This figure is based on the use of an efficient reflector in a room of average brightness or size. For a
brighter room use a smaller aperture, and for a larger room, or at night outdoors, use a larger aperture.
For a greater enjoyment of picture-taking with the BESELER TOPCON AUTO 100 camera the following TOPCON
accessories should be used:-TOPCON FILTERS:
Use filters for obtaining more faithful tonal renditions or for producing special effects to highlight or dramatize pictures.
In black-and white photography, filters are used for separating color tones which cannot be truthfully rendered as seen by
the human eye. For example, yellow may seem to be ten times brighter than blue but, on the panchromatic film, blue
registers a brightness only four fifths that of yellow. In other words, filters are use to control these different tones.
In color photography, on the other hand, filters are used for balancing light not suitable for the film loaded in the camera
or for correcting color deficiency in the illumination. Since filters cut off some part of the light that enters the lens, the
exposure must be increased to compensate for the difference; the additional exposure increase, called the filter factor, is
indicated in the following tables, together with the color and effect of several filters for use on the BESELER TOPCON
AUTO 100 camera.
Screw in type filters are available in 49mm and 58mm mounts, which are screwed into the front mount of the lenses. The
58mm is for the 13Smm telephoto tens, while the former is for the other three lenses. Most outdoor shots should be taken
with a filter, especially shots of the sky, with or without clouds. The UV TOPCOR lenses have special UV filtration and
thus give crisper black-and-white shots, and truer color picture, and does not require the attachment of UV filters.
Use the lens hood for getting better pictures in all you shots, but especially for against the-light shots and artificial
illumination shots, because it will eliminate stray light which might otherwise effect the brilliance and clarity of the
picture. It will also protect the lens surface from rain or snow which could cause image distortion.
There is one 55mm screw-in lens hood for both the standard and wide-angle lenses, a 55mm screw-in type for the 100mm
telephoto and a 60mm snap-on type for the 135mm telephoto lens. The wrong hood will cause vignetting and should not
be used.
Use the close-up lens for shooting at closer subject-to-camera
distances than possible with the unassisted lens. Two close-up lenses
can be screwed into the filter mount of the standard lens, either
singly or together, without changing the single lens view-focusing
The No. 1 close-up lens will cover the focusing distance 70 cm to 40
cm, while the No. 2 lens will cover the range 4S cm to 30 cm, and
both lens combined will cover the distances from 32 to 26 cm.
1. Store your camera, lenses and accessories away from humidity, salty air, dust, extremely high or low temperatures and
corrosive fumes, and store in a cool, dry and well-ventilated place.
2. Don't store it in closed compartments, containers or in the glove compartment of the car.
3. When storing the camera for a long time, take it out of its leather case, release the shutter, revolve the focusing ring to
infinity, wrap the camera in a dry and soft lint-free cotton cloth and place it in a tin-lined container, with a tight cover, and
put in a lot of desiccant, such as silica gel.
4. If the camera is stored for a very long time, take it out once in a while to give it an airing when the weather is cool and
5. Protect your camera, lens and accessories against rain, dust, sand, strong sunlight and salty air outdoors by keeping the
cover of the leather ever ready case closed except for the actual shot.
6. After using your camera outdoors, always use a blower to blow away the dust, or a soft hair brush to brush the dust
away, and then wipe it clean with a soft lint-free cloth.
7. Do not clean the lens too often but, when doing so, always use the blower or soft brush first to get rid of the dust and
then gently wipe it with a lens tissue. If further cleaning is necessary, very lightly dip a lint-free cloth into plain water, or
pure grain alcohol, or possibly a mixture of alcohol and ether (4: 1 ratio), and lightly wipe the lens surface in a circular
motion. Don't rub the surface on any condition.
8. If the camera is dropped into the ocean, wash immediately with clean water, lubricate with good quality oil and send
out for repairs at once.
9. Clean the inside of the camera, the reflex mirror and pressure plate, with a soft brush or air blower only.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF