EATON How to get OIDs list
EATON How to get OIDs list
Contents
Requirements: ........................................................................................................................................... 1
Download the MIB..................................................................................................................................... 1
Load the MIB on Ireasoning MIB Browser................................................................................................. 3
Get the OID list .......................................................................................................................................... 5
Export the list .......................................................................................................................................... 10
Import into Excel ..................................................................................................................................... 12
Requirements:
Software: a MIB browser is required. For this procedure I will use iReasoning MIB Browser.
Hardware: An UPS with a network card
Download the MIB
Go to http://powerquality.eaton.fr/Support/Software-Drivers/Downloads/connectivity-firmware.asp
and download the Mib files for your card.
(in this case I am using the Network-MS card)
EATON_How_to_Get_OIDs_list_REV_01
Page 1
EATON_How_to_Get_OIDs_list_REV_01
Page 2
Load the MIB on Ireasoning MIB Browser
Open Ireasoning MIB Browser software and go to File and Load MIBs
EATON_How_to_Get_OIDs_list_REV_01
Page 3
Select the MIBs files and click on Open
EATON_How_to_Get_OIDs_list_REV_01
Page 4
Get the OID list
Enter the IP address of the UPS network card
EATON_How_to_Get_OIDs_list_REV_01
Page 5
Click on Advanced… and add the Read and Write Community password (public and private).
EATON_How_to_Get_OIDs_list_REV_01
Page 6
Go to iso.org.dod.internet.mgnt.mib-2 and right click upsMIB. Then Get Subtree (on the right you will
have the list of all the OIDs in the RFC 1628 standard MIB)
EATON_How_to_Get_OIDs_list_REV_01
Page 7
EATON_How_to_Get_OIDs_list_REV_01
Page 8
Now go to private and right click enterprises, then Get Subtree (this will list the list of all OIDs in Eaton
MIBs)
EATON_How_to_Get_OIDs_list_REV_01
Page 9
Export the list
Once you have the list of all OIDs availables in your UPS, just click on Save the result table
EATON_How_to_Get_OIDs_list_REV_01
Page 10
EATON_How_to_Get_OIDs_list_REV_01
Page 11
Import into Excel
Open Microsoft Excel and go to Data/ From other sources and select From XML Data Import
EATON_How_to_Get_OIDs_list_REV_01
Page 12
Select your file and just import the XML file generated with iReasoning MIB Browser
End of the procedure.
EATON_How_to_Get_OIDs_list_REV_01
Page 13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising