Automating lifestyle.

Automating lifestyle.
Automated lifts
Home theater automation
Television lifts
Automating lifestyle.
General product guide
Masters of Automation
Inca Corporation was founded in 1971. Our primary business is the
located at home, on a yacht, in a motor home, aircraft, corporate office,
development of automation equipment to move Television displays, flat
or a media room, Inca automation products are always available to serve
screen monitors, Projectors, Appliances, and other related items from
your needs.
concealed locations, to allow them to be viewed or operated. Our product
line includes TV Lifts, Pullout and Swivel systems, Table conversions,
Inca Corporation is a vertically integrated manufacturing company that
Automated Door systems, and Lifts to raise and lower Projectors from the
makes everything from swivel rings, or to large area bearings. We keep in
ceiling or floor, and much more. We also make a wide variety of controls,
stock a wide range of products. Our manufacturing capability enables us
which include: Rocker switch, Radio remote, Infrared, Touchscreen
to tackle complex and demanding custom automation requirements for
interface, 12 VDC, or Dry contact actuated controllers. Inca can provide up
most of the standard products that we make. Your dreams can become a
to four different motions on a lift (i.e. raising a TV set out of concealment,
reality with the help of Inca Corporation.
pulling the TV out, turning the TV, and tilting it to a desired viewing
position), all with one controller. Whether your entertainment center is
P/N 900814
Flat Screen Lift
The INCA line of flat screen Lifts, P/N 900814 and all models thereof,
are specifically designed to move flat screen TVs from concealments
to any desired viewing position. The side panels are fabricated from
aluminum and the moving bar assembly depth starting at 3.75”, front
to back, and 3.00” in height. Inserts are included to mount a manual
or automatic swivel system on the lift platform. Standard units are
wired to a universal junction box to allow the attachment of any INCA
flat screen lift accessory, or controller, such as: (RF) radio remote,
rocker switch, Infrared, 12 VDC/Dry contact closure for touchscreen
commands, and power sensor module.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• VESA compliant mounting system available
• Aluminum side panels and steel spur gears
• Unit can lift up to 450 lbs.
• Available in stainless steel upon request
• Available in automatic or manual swivel (optional)
• Touch-stop safety controller available upon request
4 | visit www.inca-tvlifts.com
P/N 900815
Compact Flat Screen Lift
The 900815 series of lifts were designed to move smaller-sized flat
screen TVs or monitors from a concealed location to an ideal viewing
position. The aluminum side panels are only 4.125” in depth. The
stiff moving bar assembly that contains the motor and drive system,
is fabricated from steel and is only 3.00” in depth and 3.125” in
thickness. Standard units are wired to a universal junction box, to
allow the attachment of any INCA Plasma TV lift accessory, or control,
such as: (RF) radio remote, rocker switch, Infrared, 12 VDC/Dry contact
closure for touchscreen commands, and power sensor module.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• VESA compliant mounting system available
• Available in stainless steel upon request
• Available in automatic or manual swivel (optional)
• Aluminum side panels and steel spur gears
• Unit can lift up to 70 lbs.
visit www.inca-tvlifts.com | 5
P/N 900810-6A
Flat screen Lift and Swivel
The flat screen low profile swivel is designed to mount onto an INCA
Lift. Since the swivel is only 1.50” in height and 8.50” or 10.00” in
diameter, this system allows flat screen TVs to be mounted in very
height sensitive locations, such as the foot of a bed or beneath a
window sill. When operated, the swivel can raise and turn the flat
screen TV 360-degrees to the desired viewing position. Choice of
control options available include: (RF) dual channel radio remote
or touch-screen compatible controllers that accept dry contact or
12 VDC signals.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Adjustable magnetic cam default stops
• Internal ports are provided for customer’s cables
• Available in automatic or manual swivel (optional)
• Unit will not go down if the TV is rotated off center
• VESA compliant mounting system available
• Available in stainless steel upon request
• Touchstop safety controller available upon request
• Unit can lift up to 450 lbs.
6 | visit www.inca-tvlifts.com
P/N 900810-6B
Compact Flat Screen Lift and Swivel
The micro-swivel is designed to mount on an INCA Compact Flat
screen Lift, to turn smaller-sized LCD or monitors. Since the swivel is
only 1.50” in height and 5.75” in diameter, this system allows smallersize flat screens to be mounted in very height sensitive locations, such
as the foot of a bed or beneath a window sill. When operated, the
micro-swivel can raise and turn the flat screen 360-degrees to the
desired viewing position. The swivel can be controlled by (RF) radio
remote or touch-screen compatible controllers.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Adjustable magnetic cam default stops
• Internal ports are provided for customer’s cables
• Available in automatic or manual swivel (optional)
• Unit will not go down if the TV is rotated off center
• VESA compliant mounting system available
• Available in stainless steel upon request
• Touchstop safety controller available upon request
• Unit can lift up to 70 lbs.
visit www.inca-tvlifts.com | 7
P/N 900814-400f1
TV Floor Lift
The Inca TV Floor Lift houses any size flat screen and raises it out of the
floor for convenient viewing. These units are completely assembled
and ready for installation. The extension section can be made to
bring the TV up to the desired viewing level. Control options available
include: (RF) radio remote, rocker switch, infrared, 12 VDC/dry contact
closure for touch-screen commands, and power sensor module.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Rolling cable trays provided for customer’s cables
• External j-box for easy access to controllers
• Rigid steel tube construction with aluminum covers
• Available in automatic or manual swivel (optional)
• VESA compliant mounting system available
• Available in stainless steel upon request
• Touchstop safety controller available upon request
• Aluminum side panels and steel spur gears
8 | visit www.inca-tvlifts.com
P/N 900814-400f2
TV Floor Lift with Swivel
This Floor Lift houses any size flat-screen, raises it out of the floor , and
then swivels it up to 360-degrees to any viewing angle. These units
are completely assembled and ready for installation. Control options
available include: (RF) dual channel radio remote or touch-screen
compatible controllers that accept dry contact or 12 VDC signals.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Rolling cable trays provided for customer’s cables
• External j-box for easy access to controllers
• Rigid steel tube construction with aluminum covers
• Unit will not go down if the TV is rotated off center
• Available in automatic or manual swivel (optional)
• VESA compliant mounting system available
• Available in stainless steel upon request
• Touchstop safety controller available upon request
• Aluminum side panels and steel spur gears
visit www.inca-tvlifts.com | 9
P/N 900810-5w
Lift Mounted Corner Post Swivel
The Ultra Stable Lift and Corner Post swivel is designed to suspend a
full-sized flat screen TV, from one edge and swivel it to a convenient
viewing angle. The heavy duty base that mounts on the custom Ultra
Stable lift can be installed to provide a 90 or 180 degree turn. The
swivel system is electrically interlocked, so the lift cannot move unless
the swivel is returned to zero position. Choice of control options
available include: (RF) dual channel radio remote or touch-screen
compatible controllers that accept dry contact or 12 VDC signals.
Features
• Adjustable stop cams, to set desired viewing positions
• VESA compliant mounting system included
• Unit will not go down if the TV is rotated off center
• Available in stainless steel upon request
• Smooth and quiet operation
10 | visit www.inca-tvlifts.com
P/N 900814-410
Fold-Down Ceiling Unit
The Fold-Down Ceiling Unit is designed to hold a flat screen TV in
the ceiling and fold it down on command for viewing. When the flat
screen is not being used, it is folded up into a protected enclosure
mounted in the ceiling, where it is secure, out of the way, and safe.
The Fold-Down unit is only 6.00 inches (on average) in thickness, and
comes with a special steel frame that once permanently installed in
the ceiling, permits the machine to be easily removed and reinstalled,
should that ever be required. Choice of control options available
include: (RF) radio remote, rocker switch, infrared,12 VDC/dry contact
closure for touch-screen commands, and power sensor module.
Features
• Includes TV mounting hardware
• VESA compliant mounting system included
• Retracts into ceiling
• Controls provided on external j-box for easy access
• All internal shrouds are black anodized
• Available in stainless steel upon request
• External j-box for easy access to controllers
visit www.inca-tvlifts.com | 11
P/N 900814-410s
Fold-Down and Swivel Ceiling Unit
The Fold-Down and Swivel Ceiling unit is specifically designed to store
a flat screen TV in the ceiling and upon command, fold the TV down
into a room, and then swivel it to a perfect viewing position. When
the flat screen is not in use, it folds up inside the ceiling in 6-inches of
space (on average). Each unit comes with a special frame that once
permanently installed in the ceiling permits the machine to be easily
removed and re-installed should that be required. Control options
include two-button (RF) radio remote, or a two-motion controller for
touch-screen use.
Features
• Includes TV mounting hardware
• VESA compliant mounting system included
• Retracts into ceiling
• All internal shrouds are black anodized
• Available in stainless steel upon request
• Fully automatic swivel system can rotate TV 360-degrees
• External j-box for easy access to controllers
• Can accommodate a monitor up to 50” wide
12 | visit www.inca-tvlifts.com
P/N 900814-410ext
Fold Down and Extend Ceiling Unit
The Fold Down and Extend Ceiling unit can fold a flat screen TV out
of the ceiling, and then lower it closer to the floor using an extension
section. When the flat screen is not in use, it folds back inside the
ceiling in 12-inches of space (on average). Each unit comes with a
special frame that can be easily removed and re-installed should that
be required. Choice of control options available include: (RF) radio
remote, rocker switch, infrared,12 VDC/dry contact closure for touchscreen commands, and power sensor module.
Features
• Includes TV mounting hardware
• VESA compliant mounting system included
• Retracts into ceiling
• All internal shrouds are black anodized
• Available in stainless steel upon request
• External j-box for easy access to controllers
• Can accommodate a monitor up to 50” wide
visit www.inca-tvlifts.com | 13
P/N 900814-410-exts
Fold Down, Extend, and Swivel
Ceiling Unit
The Fold Down, Extend, and Swivel Ceiling unit can fold a flat-screen
TV out of the ceiling, lower it closer to the floor using an extension
section, then rotate the TV to the ideal viewing position. When the
flat-screen is not in use, it folds back inside the ceiling in 12-inches of
space (on average). Each unit comes with a special frame that once
permanently installed in the ceiling permits the machine to be easily
removed and re-installed should that be required. Control options
include two-button RF radio remote, or a two-motion controller for
touch-screen use.
Features
• Includes TV mounting hardware
• VESA compliant mounting system included
• Retracts into ceiling
• All internal shrouds are black anodized
• Available in stainless steel upon request
• Swivel system can rotate TV 360-degrees
• External j-box for easy access to controllers
• Can accommodate a monitor up to 42” wide
14 | visit www.inca-tvlifts.com
P/N 900814-400e1
Vertical Drop Down Ceiling Unit
The Vertical Drop Down Ceiling unit is a completely enclosed system,
which stores any size flat screen in the ceiling and brings it down for
convenient viewing. These units are completely assembled and ready
for installation. The extension section can be made to bring the TV
down to the desired viewing level. Choice of control options available
include: RF radio remote, rocker switch, infrared,12 VDC/dry contact
closure for touch-screen commands, and power sensor module.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Internal rolling cable trays provided for customer’s cables
• High reliability, aircraft screw-on, multi-pin connectors
• External j-box for easy access to controllers
• Rigid steel tubular frame
• Unit will not go down if the TV is rotated off center
• VESA compliant mounting system included
• Available in stainless steel upon request
visit www.inca-tvlifts.com | 15
P/N 9000814-400e2
Vertical Drop Down and Swivel
Ceiling Unit
The Vertical Drop Down and Swivel Ceiling unit is a completely
enclosed system which provides a safe means of storing a flat screen
TV above the ceiling, lowering it into the room, then rotating the TV
up to 360-degrees for the ideal viewing position. Control options
include two-button (RF) radio remote, or a two-motion controller for
touch-screen use.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Internal rolling cable trays provided for customer’s cables
• High reliability, aircraft screw-on, multi-pin connectors
• External j-box for easy access to controllers
• Rigid steel tubular frame
• Unit will not go down if the TV is rotated off center
• VESA compliant mounting system included
• Available in stainless steel upon request
16 | visit www.inca-tvlifts.com
P/N 900814-400e2at
Vertical Drop Down, Swivel,
and Tilt Ceiling Unit
The Vertical Drop Down, Swivel, and Tilt Ceiling unit is a completely
enclosed system which provides a safe means of storing a flat screen
above the ceiling, lowering it in the room, then tilting the TV forward
up to 30-degrees, then rotating the TV up to 360-degrees for the ideal
viewing position. This specific Drop down model can be operated on
a triple-channel radio remote or a triple-motion sensor for touchscreen
use. An extension section to lower the TV further down into the room
is optional.
Features
• Rack and pinion construction
• External, positive-stop, adjustable limit switches
• Internal rolling cable trays provided for customer’s cables
• High reliability, aircraft screw-on, multi-pin connectors
• External j-box for easy access to controllers
• Rigid steel tubular frame
• Unit will not go down if the TV is rotated off center
• VESA compliant mounting system included
• Available in stainless steel upon request
visit www.inca-tvlifts.com | 17
P/N 900810-5w
Wall Mounted Corner Post
Swivel System
The Wall Mounted Corner Post Swivel is designed to suspend a fullsized flat screen TV, from one edge and swivel horizontally to the ideal
viewing position. Each Corner Post Swivel assembly includes two
mounting brackets; one to mount the flat screen to the enclosure,
whether the enclosure is provided by INCA or not, the other to attach
the flat screen TV to the corner post swivel system. All of these
hardware pieces are fully assembled and crated for shipping. If they
are all ordered together, the enclosure is mounted and crated with the
corner post swivel system.
Features
• Includes mounting hardware
• Operates on (RF) radio remote or touch-screen
• Smooth and silent operation
• High reliability, aircraft screw-on, multi-pin connectors
• VESA compliant mounting system available
• Available in Stainless steel upon request
18 | visit www.inca-tvlifts.com
P/N 900810-5AW-PS
Motorized Wall Mounted
Pullout and Swivel System
The beauty and utility of a wall mounted flat screen TV is even more
enhanced with this fully automated wall mounted system. At the press
of a button, you can bring your TV out from the wall and rotate it to
the most desired viewing position. With the touch of a button, you
can also initiate automatic commands that reverse motions, from any
position, to bring the flat screen back to the wall. The Wall mounted
Pullout and Swivel system can be installed ‘recessed’ or flush to the
wall. Choice of control options available include: (RF) radio remote or
12 VDC/dry contact closure for touch-screen commands.
Features
• Completely assembled wall mounting frame
• Cable management system
• VESA compliant mounting system included
• Recessed into or flush to wall mounting frame
• Available in black, white, and silver
visit www.inca-tvlifts.com | 19
P/N 900500-ssp
Sideslider Pullout
The Sideslider Pullout system is a compact, rigid and sturdy linear slider
specifically designed to slide out a flat screen, from a concealment to
viewing position, on command. This unit is ideal for unique in-wall
applications, it will support up to 150 pounds, and provide motorized
extension for TVs up to 47-inches wide. Control options include dualchannel (RF) radio remote and 12 VDC/dry contact closure for touchscreen commands. All controls are attached via an external j-box,
which is on a 25-foot cable, so they can be installed in an accessible
area.
Features
• Aircraft multi-pin connectors for high reliability
• Remote easy access j-box for controller attachment
• Rolling cable trays provided for cable management
• VESA compliant mounting system available
• Available in stainless steel upon request
20 | visit www.inca-tvlifts.com
P/N 900500-ssps
Sideslider Pullout with Swivel
The Sideslider Pullout and Swivel system is a compact, rigid and sturdy
linear slider specifically designed to slide out a flat screen, from a
concealment to viewing position, and rotate it to a desired viewing
angle, on command. This unit is ideal for unique in-wall applications,
it will support up to 150 pounds, and provide motorized extension
for TVs up to 47-inches wide. Control options include (RF) radio
remote and 12 VDC/dry contact closure for touch-screen commands.
All controls are attached via an external j-box, which is on a 25-foot
cable, so they can be installed in an accessible area.
Features
• Aircraft multi-pin connectors for high reliability
• Remote easy access j-box for controller attachment
• Rolling cable trays provided for cable management
• Maximum rotation of up to 180-degrees
• VESA compliant mounting system available
• Available in stainless steel upon request
visit www.inca-tvlifts.com | 21
P/N 900814-400-wmt
Wall Mounted Tilting System
The Wall Mounted Tilting System is a complete, stand-alone automation
machine that mounts to a secure wall. This unit includes a mounting
system that holds a flat screen monitor and tilts it forward, up to 30degrees, on command. The internal limit switches can be set to limit
the tilt at any point up to 30 degrees. The system is supplied with an
external universal configured junction box on 25 feet of cable.
Features
• Includes the TV mounting system
• Heavy duty, semi-gloss black, steel construction
• VESA compliant mounting system included
• Available in stainless steel upon request
22 | visit www.inca-tvlifts.com
P/N 900806-h
Horizontal Door Opener
Each single-track or double unit can carry a load of up to 250 lbs. The
Door opening system is universally configured to use either rocker
switch, (RF) radio remote, or external 12 VDC/dry contact signals and
power sensor module. Put two tracks together and you can open two
doors with the same controller. Custom sizes are readily available. It is
compact designed, to mount vertically or horizontally.
Features
• All aluminum construction
• Carries up to 250 lbs.
• Available in single and double-door openers
• Narrow profile
• Available in stainless steel upon request
visit www.inca-tvlifts.com | 23
P/N 900806-hmini
Mini Horizontal Door Opener
Specifically designed to meet the needs of furniture manufacturers and
cabinetmakers, the Mini Horizontal Door Opener is easy to order and
easy to install. The unit is designed to move a small door that weighs
up to 40 lbs. The mini-door opener comes fully assembled. Choice
of control options available include: (RF) radio remote, rocker switch,
infrared,12 VDC/dry contact closure for touch-screen commands, and
power sensor module.
Features
• All aluminum construction
• Carries up to 40 lbs.
• Available in single, and double-door openers
• Narrow profile
• Available in stainless steel upon request
24 | visit www.inca-tvlifts.com
P/N 900806-vsr
Vertical Step Back and Rise
Door Opening Module
INCA manufactures a complete hidden automation system that will
retract a door in a wall by stepping it back out of its frame, then raise
it vertically out of the opening for complete clearance. The Step Back
and Rise comes completely assembled. The motorized moving bar can
be made to hold a door, sized to your requirements. Each system has
an external junction box. Choice of control options available include:
RF radio remote, rocker switch, infrared,12 VDC/dry contact closure
for touch-screen commands, and power sensor module.
Features
• Smooth quiet operation
• Rack and pinion gear driven
• Hardware ready, to attach to your door
• Pre-wired to accept any INCA controllers
• Shipped fully assembled
visit www.inca-tvlifts.com | 25
P/N 900808-1
Panel Lift
The Panel Lift is designed to lift panels, pictures, art displays, or any
flat objects such a door or partition. These machines are available in
3 models: “6 x 6”, 4” x 4”, or 3” x 3” in cross section. Each system
is fitted with an external junction box on a 25’ cable to facilitate the
connection of the INCA controller. Choice of control options available
include: RF radio remote, rocker switch, infrared,12 VDC/dry contact
closure for touch-screen commands, and power sensor module.
Features
• Completely fabricated from stainless steel
• Shipped completely assembled
• Entire motor assembly can be easily removed from installed unit
26 | visit www.inca-tvlifts.com
P/N 900808-4
Rigid Panel Moving System
The Rigid Panel Moving system is designed to move panels, artwork,
or any flat objects such a door or partition, in front of a flat-screen
TV, horizontal or vertical.
Each system is fitted with an external
junction box on a 25’ cable to facilitate the connection of the INCA
controller. Choice of control options available include: RF radio remote,
rocker switch, infrared,12 VDC/dry contact closure for touch-screen
commands, and power sensor module.
Features
• Ease of installation
• Smooth quiet operation
• Shipped completely assembled
visit www.inca-tvlifts.com | 27
P/N 900050-400hdsc
Utility Lift
The Utility Lift is a precise, rack and pinion motorized lift that will raise
loads up to specification. This lift is ideal for moving equipment such as
appliances, mini-refrigerators, microwaves, etc. This unit is available in
standard sizes or can be custom made to fit your application. Choice
of control options available include: RF radio remote, rocker switch,
infrared,12 VDC/dry contact closure for touch-screen commands, and
power sensor module.
Features
• External, positive-stop, adjustable limit switches
• Aluminum side panels and steel spur gears
• Available in stainless steel upon request
• Available in automatic or manual swivel (optional)
• Rack and pinion construction
• Touch-stop safety controller available
28 | visit www.inca-tvlifts.com
P/N 900420
Table Lift
The Table Lift Assembly is a compact, gear driven lifting mechanism
that converts a coffee table to a dining table at the flip of a switch.
The machine is a configured installation in a ‘pedestal’ supported
coffee table/dining table unit. The special four-panel construction is
extremely rigid with four crossed steel axles and gears for maximum
rigidity and strength to support the table. This unit is available in
standard sizes or can be custom-made to fit your application. Choice
of control options available include: RF radio remote, rocker switch,
and 12 VDC/dry contact closure for touch-screen commands.
Features
• External, positive-stop, adjustable limit switches
• Aluminum side panels and steel spur gears
• Available in stainless steel upon request
• Rack and pinion construction
• Touch-stop safety controller available
visit www.inca-tvlifts.com | 29
P/N 900400-dws
Dumbwaiter System
The Dumbwaiter System is enclosed in a welded steel frame with
interlocked controls and is available to meet your lifting requirements.
Individual station panels show status of car location. Available in simple
up and down or with two additional intermediate stops. Interlocked
car door prevents the unit from moving if the door is open. Station
controllers allow the car to be controlled from any station by the push
of the button.
Features
• Robust duty cycle for frequent use
• Interlocked controls at each station
• Rack and pinion drive
• Safety doors
• Double-door opening available on car
30 | visit www.inca-tvlifts.com
P/N 900411-spkr
Speaker Lift
The Speaker Lift is specifically designed to lower or raise speakers,
cameras, or equipment from a concealed position such as in the
ceiling, floor, sidewalls, or cabinetwork. These lifts will move speakers
with accuracy and high-reliability. Controllers are readily attachable to
a remote located, external junction box on 25 feet of cable. The j-box
can connect any combination of INCA controllers, including simple
rocker switch, power sensor module, radio remote, or 12 VDC/Dry
contact closure for touchscreen use.
Features
• Rack and pinion driven, for smooth movement
• Unit is shipped completely assembled
• Custom sizes are readily available
• Available in stainless steel upon request
visit www.inca-tvlifts.com | 31
P/N 900411-LCD
Projector Lift
This lift is specifically designed to store a projector in the ceiling when
it is not in use. When you need the projector, the system lowers
the projector out of the ceiling to the desired projection position
in the room. A smooth and accurate rack and pinion drive system
ensures that the projector stops in the same place every time. The
Projector Lift is available in two standard sizes. Custom versions are
also readily available. Choice of control options available include:
RF radio remote, rocker switch, and 12 VDC/dry contact closure for
touch-screen commands.
Features
• External, positive-stop, adjustable limit switches
• Aluminum side panels and steel spur gears
• Available in stainless steel upon request
• Rack and pinion construction
32 | visit www.inca-tvlifts.com
INCA CONTROL OPTIONS
Inca manufactures a wide range of controllers and accessories for our equipment. These controllers range from one to three channels
of RF radio remote, rocker switch, power sensor module, and programmed input, 12 VDC/dry contact closure, such as from a touch-
P/N 900818
Rocker Switch
P/N 900819,-820
screen system.
RF Radio Remote
Operates your lift up and down
Uses radio waves to control a unit up to 50 feet away. The Radio
Remote is available in single-button, two-button, and three-button
depending on the number of motions of your system. These versions
can be distinguished by the color of the box. The single channel box
is gold, dual-channel is red, and triple-channel is purple.
Item Number
Description
Functions Controlled
Motions Controlled
900818
Rocker Switch
Single Channel
One Motion
900819
RF Radio Remote
Dual Channel
Two Motions
900819-TS
Motion Sensor (Touchscreen)
Dual Channel
Two Motions
900820
RF Radio Remote
Single Channel
One Motion
900822-100
Infrared Power Sensor
Single Channel
One Motion
900823-A,-D
12 VDC/Dry Contact Closure
Single Channel
One Motion
P/N 900823-a
External 12 VDC/Dry Contact Closure
P/N 900822-200
Power Sensor Module
P/N 900814-412-7
INCA CONTROL OPTIONS
Universal Mounting System
Is ideal for touchscreen use, where you can command the lift to move
up and down through programmed signals. The closure is available
as a one-motion sensor, 900823-A,900823-D (12 VDC only) and as a
two-motion sensor, 900819-TS
This device will sense that a TV has been turned on and will
automatically raise the lift. When the TV is turned off, the sensor
will automatically move the lift back down to its stored position. This
module can be used to open doors, operate ceiling units, pullout, and
tilting mechanisms, or products as long as a TV or universal remote is
being used, to turn the TV power on and off.
The Universal Mounting system can attach to the back of any flat
screen and allow the TV to be mounted inside an enclosure. This
mounting system can be connected to any of our various lines of
products: TV lift, lift and swivel, Wall mount system, Wall mount and
tilt, Sideslider mechanism, etc. It is fully adjustable to accommodate
any size TV. The complete frame is only 1.125” thick, so it does not
significantly add to the depth of the TV. The Universal Mounting
System is also VESA compliant.
INCA CORPORATION
1648 West 134th Street
Gardena, CA 90249
T | 310-808-0001
F | 310-808-9092
Toll Free | 877-961-INCA (4622)
Email | inca@inca-tvlifts.com
Office Hours:
M-F 8 AM to 4:30 PM PST
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising