iGo primo Map Update Procedure

iGo primo Map Update Procedure
iGo primo Map Update Procedure
Note: The SoftTouch™ Navigation System’s SD card, which contains the map files, must first be activated by
installing the complete system into a vehicle, powering on the system, and letting the software connect to a GPS
satellite at least once.
Note: A Windows-based personal computer and the Naviextras Toolbox are required when upgrading the iGo
maps. The Naviextras Toolbox is available for download using the steps below:
1.
2.
3.
4.
Visit https://www.naviextras.com.
Select “Download PC Tool” from the home page.
Select “Download” from the Naviextras Toolbox page.
Save the Naviextras Toolbox to your PC
Naviextras Toolbox Installation
Run the Naviextras Toolbox installer by double-clicking the
installation file you downloaded.
Agree to the Naviextras Toolbox End User License Agreement
(EULA).
Naviextras Toolbox Installation continued…
Select the location on your PC where you would like to install
the Naviextras Toolbox file.
Once the software installation has finished, click “Finish”.
Note: Insert the SD card from the SoftTouch™ Navigation System into your PC before launching the Naviextras
Toolbox software. Launch the Naviextras Toolbox software and allow it to automatically locate your SD card
and parse the built-in map files to check for free updates first.
Once the software is launched and the SD card has been parsed, select CATALOGUE from the left-hand
navigation and either log in using a previously-created user ID, or use the CREATE USER PROFILE tab in
order to begin using the software.
Once a user ID has been created, select the BACKUP
tab from the left-hand navigation menu to create a
complete backup of the data on the SD card.
Once the SD card backup is complete, select the
UPDATE tab from the left-hand navigation menu to
search for free map updates.
Once the required updates have been installed, select
the CATALOGUE tab from the left-hand navigation
menu to view the maps available for purchase by
country.
Select the maps you want to add to the SD card and
click ADD TO CART to add these maps to your
virtual shopping cart.
Once you have chosen the maps you want to add to the SD card, enter your payment information and the maps
will begin downloading and install automatically onto your SD card.
Remove the SD card from the PC using the “Eject
Removable Disk” option in the toolbar.
Remove the SD card from your PC, re-install it into the
navigation module, and power on the system
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising