Simrad MX535B Class-A AIS System

Simrad MX535B Class-A AIS System
Simrad MX535B Class-A AIS System
The Simrad MX535B is an IMO Type approved Class-A AIS transponder system. This is the most competitively priced Simrad
Class-A AIS system to date, and offers both standalone and expanded system configuration options.
CONFIGURATION OPTIONS
Unlike its predecessor (MX535A), the MX535B can operate as a
standalone or expanded system. The basic standalone system
includes an MX510 display and combined junction box and
transponder. Alternatively, you can configure an expanded system
that includes the MX512 display, junction box, and DGPS (such as the
MX521). The expanded system provides 8 input/output ports
for connection to multiple onboard systems such as radar, ECDIS, VDR
MX535B
etc.
SAFETY AND AWARENESS
Adding AIS to navigation for spontaneous ‘ship to ship’ or ‘ship
to shore’ recognition greatly enhances safety at sea and provides
mariners with new levels of real-time information. AIS systems
allow you to receive an instant overview of traffic situations and the
MX510
manoeuvres of other ships, make contact with other ships easily by
using the Call Signs presented by the AIS screen, and you can also get
detailed information on AIS enabled ships in radar blind zones.
Main Features:
· IMO Type approved Class-A AIS system
•
The most price competitive Simrad Class-A AIS solution to date
•
Available as a standalone system, or as part of an expanded system with DGPS
•
The expanded system provides 8 input/output ports for connection to multiple on board systems
Technical specifications overleaf.
Wheelmark Approved
MX512 &
MX521A
Technical Specifications
PART NUMBER
DESCRIPTION
Carrier Power, High power setting
000-11129-001
MX535B MKD System (MX535B+MX510 CDU)
Includes: MX535B Transponder, MX510 CDU, AIS License, AN156 GPS
Antenna, MX535B Manual
12.5W, 41dBm +/- 1.5dB (n.c)
+/- 3.0dB (e.c)
Carrier Power, Low power setting
1W, 30dBm +/- 1.5dB (n.c)
+/- 3.0dB (e.c)
Data transmission bit rate
9600 bits/s +/- 50ppm
Modulation Spectrum
< -25dBc @ fc< +10kHz
< -70dBc @ +25kHz< fc< +62,5kHz
Modulation Accuracy test signal 2
< +/- 175 (n.c)
< +/- 350 (e.c)
Modulation Accuracy test signal 3
< +/- 240 (n.c)
< +/- 480 (e.c)
Maximum Transmission Time
A transmission shall not exceed 5 slots (133ms)
Excessive Transmission Failure mode
A transmission is shut down by hardware if transmission exceeds 300ms
Spurious emissions
< - 36dBn @ 9kHz - 1GHz
< -30dBm @ 1GHz - 4GHz
000-11130-001
MX535B MKD System (MX535B+MX512 CDU)
Includes: MX535B Transponder, MX512 CDU, MX512 Junction Box,
AIS License, AN156 GPS Antenna, MX535B Manual
000-11131-001
MX535B NAV System (MX535B+MX512+MX521A)
Includes: MX535B Transponder, MX512 CDU, MX512 Junction
Box,MX521A DGPS Smart Antenna, AIS License, AN156 GPS
Antenna, MX535B Manual
000-11132-001
MX535B Upgrade (for those who already have an MX512 and
wish to add AIS)
Includes: MX535B Transponder, AIS License, AN156 GPS Antenna,
MX535B Manual
DISPLAY
Dimensions:
292 x 150 x 105mm. (WxHxD)
Weight:
1.51kg
Temperature:
Operating: -150C to +550C (50 F to 1310F)
Colour:
Black
Enclosure:
Splashproof
Humidity
IEC 60945 ed4
LCD Size:
5.7” LCD
LCD:
Black and White STN. Matches polarized sun
glasses.
Supply voltage
10.5 to 32 VDC
RECEIVER
TRANSPONDER
Size:
274 x 204 x 67mm
Size with bracket:
(319 x 204 x 76mm)
Weight:
3.7kg
Colour:
Black
Enclosure:
Aluminium
Supply voltage:
12-24 VDC +30% / -10%
Power consumption:
<15W average
<50W burst
Operating temperature:
-25oC to +55oC (-130 F to 1310F)
Environmental:
IP56 / IEC60945 exposed
Compass safe distance:
Standard Compass: 95cm
Steering Compass: 65cm
16 channel GPS
SBAS: WAAS, EGNOS, MSAS
Navigation update rate:
Up to 4 Hz
Accuracy:
Position: 2.5m CEP
SBAS: 2.0m CEP
Acquision
Cold Start: 36s
Warm Start: 33s
Hot Start: <3.5s
Reacquisition: <1s
Sensitivity
Tracking: -158 dBm
Acquisition: -148 dBm
Cold Starts: -142 dBm
< 20% PER @ -107dBm (n.c)
< 0% PER @ -101dBm (e.c)
Error behaviour at high input levels
< 1% PER @ -77dBm
< 1% PER @ -7dBm
Adjacent channel selectivity
< 20% PER @ 70dBm (n.c)
< 20% PER @ 60dBM (e.c)
Co-channel rejection
< 20% PER @ 10dB
Spurious response rejection
< 20% PER @ 70dB
Intermodulation response rejection
< 20% PER @ 74dB
Spurious emissions
< -57dBm (9kHz to 1GHz)
< -47dBm (1GHz to 4GHz)
Blocking
< 20% PER @ 86dB
Modulation Accuracy test signal 3
< +/- 240 (n.c)
< +/- 480 (e.c)
Excessive Transmission Failure mode
A transmission is shut down by hardware if transmission exceeds 300ms
Spurious emissions
< -36dBm @ 9kHz - 1GHz
< -30 dBm @ 1GHz - 4GHz
DSC
INTEGRATED GPS
Receiver type:
Sensitivity
Frequency Range
Ch 70, 156.525 MHz
Sensitivity
< 20% PER @ -107dBm (n.c)
< 0% PER @ -101dBm (e.c)
Modulation
PSK, 1200 Baud.
Error behaviour at high input levels
< 1% PER @ -7 dBm
Co-Channel Rejection
Between - 10.0dB and 0dB. See 61993-2, 5.4.3
Adjacent channel selectivity
< 20% PER @ 70dBm (n.c)
< 20% PER @ 60dBM (e.c)
Spurious response rejection
< 20% PER @ 70dB
Intermodulation response rejection
< 20% PER @ 65dB
Blocking or desensitisation
< 20% PER @ 84dB
D I S T R I B U T E D BY:
Frequency Error
<+/-0.5 kHz under normal conditions (n.c)
<+/-1.0 kHz under extreme conditions (e.c)
Frequency Range
156.025-162.025 MHz
Channel Switching Time
< 25ms.
Navico Asia Pacific
Tel: +64 9 925 4500
Navico Americas
Tel: +1 832 377 9578
Email: sales.americas@navico.com
Navico EMEA Tel: +44 1794 510 010
Email: sales.emea@navico.com
Email: sales.apacnz@navico.com
985-10665-001
TRANSMITTER
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising