FABRICATOR® 141i
FABRICATOR 141i
®
Multi Process Welding System
Fabricator 141i
Part No. W1003141
®
Comes Complete with:
• Fabricator 141i Power Supply
• 10 ft Tweco Fusion™ 140 Amp MIG Gun
• Bonus Contact Tips (1 each):
.023 (0.6 mm)
.030 (0.8 mm) Installed
.035 (0.9 mm)
• Victor® Argon Flowgauge Regulator &
12.5 ft (3.8 m) Hose
• Electrode Holder with 13 ft (4 m) Lead
• Ground Clamp with 10 ft (3 m) Lead
QUICK SPECIFICATIONS
PROCESSES
MIG (GMAW)
Flux Cored (FCAW)
Lift TIG (GTAW)
STICK (SMAW)
APPLICATIONS
Home Hobbyists (DIY)
Automotive Repair & Customization
Farms & Ranches
Maintenance & Repair
Sheet Metal & Light Fabrication
On-site & Portable Welding Applications
RATED OUTPUT
140A / 19V @ 15% Duty Cycle
90A / 18.5V @ 20% Duty Cycle
MAX. OPEN CIRCUIT VOLTAGE
53V DC
AMPERAGE RANGE
10 - 140 Amps
WIRE FEED SPEED
90 - 400 IPM (2.3 - 10.2 m/min)
WEIGHT
32.2 lbs (14.6 kg)
ORDER INFORMATION
Part No: W1003141
Description: F abricator 141i Package
Part No: W1003142
Description: F abricator 141i Package w/Cart
• Drive Rolls:
- .023" / .030" (0.6 mm / 0.8 mm)
V Groove (Installed)
- .030" / .035" (0.8 mm / 0.9 mm) for
Flux Cored Wire
• 4 General Purpose Stick Electrodes (E6013)
• Operator’s Manual & CD
• 10 ft (3 m) Power Cord and
NEMA 5-20P 115V AC Plug
• Power adapter - 115V, 20A to 15A
• Shoulder Strap
3163339
Three Process Capability:
Other Features:
MIG (GMAW/FCAW), STICK (SMAW), TIG (GTAW).
• D igital Meters: Voltage and Amperage;
Preview and Hold capability.
• E xcellent Portability: Lightweight, less than
33 lbs includes shoulder strap.
• Comprehensive Setup Chart: Weld set up guide
for optimum welding performance over a wide
range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates
operator fatigue.
• R emote Receptacle: Enables connection of
remote control devices and Spool Gun.
• Q uick Change Polarity: Simple quick change
polarity (no tools required) from the front of
the power source.
• O verload Protection: Shuts down the power
source to protect the internal electrical
components from overheating.
• IP23S: Suitable for outdoor use.
• Intelligent Fan Control: Operates when
welding commences to cool components
& reduce airborne contaminants pulled
through the power source.
MIG
• I nfinite Voltage Control for precise
voltage settings.
• I nductance Control for arc stability and
spatter control.
• T weco Fusion MIG Gun w/10 ft cable and
industry standard #4 connection.
• D urable Metal Feed Plate features 2 roll drive
system, quick change reversible drive rolls and
easy-to-set single scaled wire tension knob.
• 4 " or 8" Spool Capacity allows easy
installation of wire spool sizes.
• S pool Gun ready.
• A djustable Burnback Control.
STICK
• A djustable Arc Force Control for optimum
STICK electrode performance.
• Built in Hot Start for easy arc starting.
TIG
• L ift TIG Start: Provides TIG arc starting
without use of high frequency.
• Downslope: Eliminates the crater that can
form at the completion of a weld.
U.S. Customer Care: 800-426-1888
Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
CONTROL PANEL
Digital Meters WFS /
Amps and Volt Meters
Process Button Select
MIG, STICK or Lift TIG
WFS / Amps
Control Knob
Trigger 2T (ON/OFF)
or 4T (Trigger Hold)
selection
Voltage / Arc Force
Control / Down Slope
Control Knob
Inductance
Control Knob
SYSTEM FEATURES
Local/Remote Switch
Control Panel (Refer Above)
Burnback Control
MIG Gun / Spool Gun Switch
Fuse for Motor Protection
Tweco® Style
MIG Gun Connection
Easy installation Wire Spool
Adaptor & Braking System
Metal 2 Roll wire drive system
with quick change drive rolls
and single tension arm
Comprehensive Welding
Setup Chart for welding
process parameters
8 pin Remote Receptacle
for remote devices &
Spool Gun
Heavy Duty Welding
output terminals with
polarity reversal
capability
Tweco.com
page 2
SPECIFICATIONS
WELDING DC
PRIMARY POWER
Maximum Output
140 Amp
140A / 19V @ 15% Duty Cycle
90A / 18.5V @ 20% Duty Cycle
90A / 23V @ 15% Duty Cycle
80A / 23.2V @ 35% Duty Cycle
140A / 15.6V @ 15% Duty Cycle
100A / 14V @ 20% Duty Cycle
10A - 140 Amp
14.5V - 19V
90 - 400 IPM (2.3 - 10.2 m/min)
53V
3/16" (4.8 mm)
MIG (GMAW/FCAW)
Welding Output @104˚F (40˚C)
STICK (SMAW)
Welding Output @104˚F (40˚C)
TIG (GTAW)
Welding Output @104˚F (40˚C)
Current Range
MIG Welding Voltage Range
Wirefeed Speed Range
Nominal OCV Volt/DC
Maximum Plate Thickness
Wire Diameter Range
Solid:
Stainless Steel:
Flux cored:
Spool Size Capacity
Power Source Dimensions
(HxWxD)
Power Source Weight
Warranty Period
Approvals
Protection Class
Primary Voltage
115 VAC
Supply Voltage Range
95 - 140 VAC
Number of Phases
Single Phase
Supply Frequency
50 / 60Hz
Supply Plug
NEMA 5-20P
Rated kVA @ 140 Amps
5 kVA
Lead Cord Length
10 ft (3 m)
REPLACEMENT ITEMS & CONSUMABLES
Tweco Fusion™ 140 Amp MIG Gun, 10 ft
.023" - .030" (0.6 - 0.8 mm)
.023" - .030" (0.6 - 0.8 mm)
.030" - .035" (0.8 - 0.9 mm)
4" & 8" (100 & 200 mm)
16.2" x 8.3" x 17.7"
(410 mm x 210 mm x 450 mm)
32.2 lb (14.6 kg)
3 Years*
IEC 60974-1, CSA E60974-1, UL 60974-1
IP23S
1017-1321
Velocity™ Nozzle 1/2" Bore
1220-1200
Universal Conduit Liner
1420-1113
Velocity Contact Tip, .023"
1110-1308
Velocity Contact Tip, .030"
1110-1309
Velocity Contact Tip, .035"
1110-1310
Electrode Holder w/ Lead,
13 ft, 25 mm Dinse
Ground Clamp w/ Lead,
10 ft, 25 mm Dinse
W7003106
W7003105
Victor Argon Flowgauge Regulator
0781-9411
Gas Hose, 12.5 ft, Male 5/8-18UNF
W4013900
Power Adapter - 115V, 20A to 15A
W4013300
Dinse Adapter, 50 mm to 25 mm
W4017500
®
* Limited Warranty, refer to warranty schedule.
Comes Complete with:
1
2
3
4
1
2
11
9
5
3
10
6
7
8
6
5
8
7
U.S. Customer Care: 800-426-1888 • Canada Customer Care: 905-827-4515
International Customer Care: 940-381-1212
4
9
10
11
Fabricator® 141i Power Supply
Victor Argon Flowgauge Regulator &
12.5 ft (3.8 m) Hose
Electrode Holder with 13 ft (4 m) Lead
Bonus Contact Tips (1 each):
.023 (0.6 mm)
.030 (0.8 mm) Installed
.035 (0.9 mm)
Drive Rolls:
. 023" / .030" (0.6 mm / 0.8 mm)
V Groove (Installed)
. 030" / .035" (0.8 mm / 0.9 mm) for
Flux Cored Wire
10 ft Tweco Fusion 140 Amp MIG Gun
4 General Purpose Stick Electrodes (E6013)
Power Adapter - 115V, 20A to 15A
Ground Clamp with 10 ft (3 m) Lead
Shoulder Strap
Operator’s Manual & CD
10 ft (3 m) Power Cord and NEMA 5-20P
115V AC Plug (not shown)
page 3
ORDERING INFORMATION
Equipment Option
Part No.
Description
Fabricator 141i Package
W1003141
Includes Fabricator 141i, Tweco Fusion™ 140 Amp MIG Gun, Victor® Argon Flowgauge Regulator
& 12.5 ft (3.8 m) Hose, Electrode Holder & Ground Clamp, Drive Rolls & Contact Tips, Sample
Electrodes, Shoulder Strap, Power Adapter and Operator’s Manual & CD
Fabricator 141i Package w/Cart
W1003142
Includes contents of W1003141 with Utility Cart W4014700
TIG Torch & Accessories
W4013802
TIG Torch, 17V, 12.5 ft, 8 pin and accessory kit with 1/16", 3/32", 1/8" thoriated
tungstens; 1/16", 3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No. 5, 6, 7
Alumina nozzles; short back cap; long back cap
Spool Gun
(required for aluminum
MIG welding)
1027-1390
Tweco Spool Gun 160A, 12 ft (3.6 m) Length, suits 4" (100 mm) spools
Basic Utility Cart
W4014700
Utility Cart, accommodates maximum 7" diameter cylinder
Foot Control
600285
Contactor On/Off and current control with 15 ft cable and 8-pin male plug
Helmet
4100-1002
Tweco Helmet, New Eagle/Stars & Stripes
Helmet
4100-1004
Tweco Helmet, New Skull & Fire
Helmet
4100-1008
Tweco Helmet, New Dragon
Tweco Carry Bag
W4015301
Protective Carry Bag & Parts Storage
7977036
7977731
7977732
V groove for steel & stainless steel wires (Installed)
U grooved for aluminum wires
V knurled groove for flux cored wires
®
ACCESSORIES
(required for TIG welding)
D R I VE ROLLS
Drive Roll .023" / .030" (0.6 / 0.8 mm)
Drive Roll .030" / .035" (0.8 / 0.9 mm)
Drive Roll .030" / .035" (0.8 / 0.9 mm)
TECHNOLOGIES™
I N N O VAT I O N T O S H A P E T H E W O R L D ™
U.S. Customer Care: 800-426-1888
Form No. 84-1311 (07/26/13)
•
Canada Customer Care: 905-827-4515
© 2013 Victor Technologies International, Inc.
•
International Customer Care: 940-381-1212
VictorTechnologies.com
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising