Premier 888/8168 Installation Manual

Premier 888/8168 Installation Manual
INS579
Apps for Android™
Android is a trademark of Google Inc.
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described
in the Creative Commons 3.0 Attribution License.
Texecom Apps for Android
Contents
Contents ............................................................................ 2
Overview ............................................................................ 3
Features & Functions ................................................. 3
Hardware requirements ................................................... 4
Panel Support ............................................................. 4
SmartKey™ app ................................................................. 5
Configuring the app ................................................... 5
Using the SmartKey™ app.......................................... 8
Virtual Keypad app............................................................ 9
Additional Menu Items ............................................... 9
Virtual Keypad .......................................................... 10
2
INS579
Texecom Apps for Android
Overview
Texecom apps for Android are available in three different versions. The following guide details the features of each app; and the
hardware required to make them function.
Features & Functions
SmartKey™ Features
Supported panels are detailed in the table below.
The App requires a ComIP, ComGSM or Chiron IRIS module connected to a Premier or Premier Elite™ control panel.
Features include:
SmartKey™
Allows you to arm, part arm, disarm and reset your alarm system. It also allows you to trigger up to 3 outputs (control panel
dependent) which can be used to control lighting etc.
Sites profiles
Allows connection to one pre-defined site profile.
Supported Languages
•
Czech
•
Danish
•
English
•
Finnish
•
Norwegian
•
Spanish
•
Swedish
•
Portuguese
Default user details are:
User Name: Master
Passcode: 123456
Keypad
Includes all the features of the SmartKey™ app, and also:
Virtual Keypad.
Access your system from the keypad as if you were using a real keypad.
Sites profiles.
Allows connection to up to three pre-defined site profiles.
Start Screen.
Select which screen the app starts on.
Engineer
Includes all the features of the SmartKey™ & Keypad app, this app must be unlocked to gain full access to all of the functions. And
in addition to the above includes:
Panel Status.
View panel type, firmware version, panel voltage and current consumption (control panel dependent).
Event Log.
View the last 20 log events.
Zone Status.
View the status of zones and omit zones on the fly.
Remote Control.
Arm, part arm, disarm and reset any selected area. Omit any selected zone.
Tools.
Anti-code reset, SmartKey™ areas, Generate protected UDL passcode (required for basic and standard app).
Sites profiles.
Allows connection to up to nine pre-defined site profiles.

INS579
Please note that this app has been designed to be used by installation engineers. Access to engineering features like Anti-code,
Protected UDL generation, Zone status and Remote control will only be available once the app is unlocked. To unlock the app, go to
setting, help and select 'Unlock App' then follow the instructions on the screen. Unlocking of the app will only be allowed once company
validation has been performed. The App will still function as an advanced user App if it is not unlocked.
3
Texecom Apps for Android
Hardware Requirements
Panel Support
Texecom apps for Android will work with Premier or Premier Elite™ as detailed in the table below. To view your panel type and
firmware version press   on the keypad.
Panel
Firmware Version
Premier Elite™ all models
SmartKey™ App
Premier 412/816
V10.13>
Premier 412/816
V10.12<
Premier 832
V4.13>
Premier 832
V4.12<



1

1
2
1
2
N/A
N/A
(640 is limited to the first 16 Areas)
Premier 24
V1.00>
N/A
Premier 48/88/168
V8.14>
Premier 48/88/168
V8.13<
Premier 640
Veritas all models
1.
2.
TBC
Keypad App
Engineers App


















N/A
N/A
The app version will determine the operation of the SmartKey™, app version V1.01< will require the installation engineer
to assign SmartKey™ areas. Later versions of the app do not require Engineer intervention.
These control panels will require the installation engineer to assign the SmartKey™ areas.
Communication Devices
To use the apps the panel must be enabled for IP communications. The app will work with the following communications devices:-
4
•
•
•
Texecom Premier Elite™ ComGSM running in GPRS mode with a fixed IP address SIM card
Texecom Premier Elite™ ComIP unit
Chiron Iris communications module

The apps ARE NOT compatible with Emizon, Dualcom, WebWayOne development discussions are ongoing.
INS579
Texecom Apps for Android
SmartKey™ App
To access the control panel, you will need some basic details to allow connection, these should be obtained from your installer.
•
•
•
•
•
IP Address
Port Number
UDL/Protected UDL
User Code
User ID
Once you have all of the required information proceed as follows:
Configuring the App
To start the app press the Icon
Login
The following screen will appear, enter the default User Name and Password , press the
Successful will appear at the bottom of the screen.
button, Login
Main Menu
Once you are logged in the following screen will appear
Press the
INS579
button
5
Texecom Apps for Android
Settings
User Details
Here you can change the default User Name & Password, Ticking the Remember Me box will have the details filled in the next time
you use the app.
Connection Details
Connection Details
Site Name/Site Summary
Description
Enter the Site Name, for example House
Enter more details about the site
Enter the IP Address or DNS given to you by the installer
Enter the Host Port given to you by the installer
Enter the UDL Password*
Enter the Protected UDL Password*
Enter your User Code
Enter your User ID
* Only enter ONE of these options. Protected UDL is preferred but can
only be obtained from your installation company.
6
INS579
Texecom Apps for Android
General
Make any required changes to the General settings, ticking the Auto Login button will mean you do not have to login each time to
use the SmartKey™
Texecom Website
Takes you to our website within the app.
Help
The Help screen details which app you have, the version number, and directs you to some specific instructions
INS579
7
Texecom Apps for Android
Instructions
Main Screen
Shows the options available
Connection Details
Explains the details required for the
Connections screen mentioned previously
Smartkey
Details the button operation and LED
indications available on the SmartKey™ screen
Using the SmartKey™ App
Once you have configured the app and put in all of the required details, you may test the functionality with your system.
To start the app press the Icon
Press the
button, the following screen will appear, the functions are detailed in the table.
Buttons
LED
Symbol
Function
LED 4
LED 3
LED 2
LED 1
Normal Mode
Full Arm
Part Arm
Disarm
For resetting &
Selecting Aux
Mode
Aux Mode
Activates PC
Control 1
*
Activates PC
Control 2
*
Activates PC
Control 3
*
Selects Normal
Mode
*only works if programmed by the installer and
the panel is capable of operation.
8
No
Colour
Status
Pink = Connected
1
Blue = Successful Login
Turquoise = Aux Mode
2
*
Red = System Armed
Flashing Red = System in Exit
Orange = System Part Armed
3
*
Orange Flashing = System Part
Arming
4
*
Green = System Disarmed
*in Aux mode these LED's will be on or off, depending on
the status of the output. Pressing the corresponding key
will either switch the output on or off. The LED will follow
the output state.
INS579
Texecom Apps for Android
Virtual Keypad App
To start the app press the icon
Follow the instructions given for the SmartKey™ app, in addition to the functions available, the keypad app has the following:-
Additional Menu Items
Additional Main Menu
The main menu has an additional button for the keypad.
Additional Connection Details
The keypad app allows connection for up to three sites, fill in the details as described previously for each site you wish to use.
Additional General Settings
The General settings have additional menu items
INS579
9
Texecom Apps for Android
Startup Screen
The Startup screen allows you to choose which screen is shown to you when the app is started.
Enable Speech
If this option is checked, when using the Virtual Keypad the text on the screen will be spoken to you by your device. Different
languages may be selected if installed on your device.
Virtual Keypad
Press the
button on the main menu screen the following screens will appear
Portrait View
Connecting Screen
Connected Screen
Landscape View
Connecting Screen
Connected Screen
The keypad can be used in exactly the same way as the real keypad on your system.
10
INS579
Texecom Limited, Bradwood Court, St. Crispin Way, Haslingden, Lancashire BB4 4PW,
England.
Technical Support:
UK Customers Tel: 08456 300 600
(Calls charged at local rate from a BT landline. Calls from other networks may vary.)
International Customers Tel: +44 1706 233875
Email: techsupport@texe.com
© Texecom Limited 2013
INS579
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising