Ducati Monster 696/796/1100 Fender Eliminator
Monster 696/796/1100 Fender Eliminator
1
2
1.
Remove seat and 4 mounting bolts
holding stock tail section (picture 1)
2.
Disconnect stock harness plug (picture 2)
3.
Remove cable from lock cylinder for seat
release (picture 3/4)
4.
5.
Remove harness from stock tail section
(picture 5)
Disconnect plugs for right and left blinker,
as well as license plate light plug by
cutting factory connectors - (Do not cut
3 wire connector – this is your brake light
connector that remains on the bike)
To inquire about custom parts installations
CONTACT US
INFO@NEWRAGECYCLES.COM | 914.339.2929
3
4
5
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Install factory connectors onto new NRC
wires (diagram 1)
Connect factory plugs back together
with tail section off bike
Choose location for license plate (3
mounting locations and hardware
provided) and use provided plugs to seal
remaining holes (picture 6)
Swap lock cylinder from stock unit over to
NRC tail light
Reconnect seat release cable to lock
cylinder, looping accordingly for proper
fitment
Screw new tail section to bike with
provided screws and spacers (1/2”
spacers/screws used on lower holes,
3/8” spacers/screws used on 2 upper
mounting holes) (picture 7)
Plug stock harness back into bike and
route accordingly (picture 8)
Test seat latch with key before installing
seat to make sure it moves freely
Turn key on and test turn signals, brake
light, and license plate light
Put seat back on and ride! (picture 9)
INFO@NEWRAGECYCLES.COM | 914.339.2929
6
7
8
9
Note the plate light wires connect
such( red wire to yellow wire )
( black wire to black wire )
NOT SHOWN
ground
(black)
orange (running light)
goes to yellow wire
( 3 wire connector )
black (ground )
goes to black wire with blue tracer
red (positive)
goes to white wire with blue tracer
red (positive)
goes to gray wire with red tracer
( 3 wire connector )
black (ground)
goes to black wire with blue tracer
red (positive)
goes to white wire with black tracer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising