SRP-275II

SRP-275II
Windows Driver Manual
SRP-275II
Impact Printer
Rev. 1.03
http://www.bixolon.com
SRP-275II
■ Table of Contents
1. Manual Information ........................................................................................................ 3
2. Operating System (OS) Environment ........................................................................... 3
3. Windows Driver Preparation ......................................................................................... 3
4. Windows Driver Installation .......................................................................................... 4
4-1 Installing on Windows XP / Server 2003 ..................................................................... 4
4-1-1 Via Serial Port or Parallel Port .............................................................................. 4
4-1-2 Via USB Port ........................................................................................................ 7
4-2 Installing on Windows VISTA / Server 2008 / 7 / 8 / Server 2012 ............................... 9
4-2-1 Via Serial Port or Parallel Port .............................................................................. 9
4-2-2 Via USB Port ...................................................................................................... 12
5. Windows Driver Settings ............................................................................................. 14
5-1 Paper ........................................................................................................................ 14
5-1-1 Paper Size .......................................................................................................... 15
5-1-2 Paper Type ......................................................................................................... 16
5-1-3 Resolution .......................................................................................................... 16
5-1-4 Copies ................................................................................................................ 16
5-1-5 Color ................................................................................................................... 16
5-2 Document Settings ................................................................................................... 17
5-2-1 Send Commands ................................................................................................ 18
5-2-2 Cash Drawer....................................................................................................... 18
5-2-3 Line Feed ........................................................................................................... 18
5-2-4 Cut ...................................................................................................................... 18
6. Windows Driver Specifications................................................................................... 19
6-1 Fonts ......................................................................................................................... 19
6-2 Special Functions...................................................................................................... 21
7. Use of Windows Driver ................................................................................................ 22
7-1 Use of Visual Basic ................................................................................................... 22
7-1-1 Windows Driver Selection ................................................................................... 22
7-1-2 Text Printing ........................................................................................................ 22
7-2 Use of Wordpad ........................................................................................................ 23
7-2-1 WordPad Environment Settings .......................................................................... 23
7-2-2 Text Printing ........................................................................................................ 23
Rev. 1.03
-2-
SRP-275II
1. Manual Information
This Windows Driver Installation Manual provides information on installation, detailed
specifications, and usage of the printer’s Windows Driver according to PC operating
system (OS).
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.
2. Operating System (OS) Environment
The following operating systems are supported for usage.
Microsoft Windows XP (32bit/64bit)
Microsoft Windows Server 2003 (32bit/64bit)
Microsoft Windows VISTA (32bit/64bit)
Microsoft Windows Server 2008 (32bit/64bit)
Microsoft Windows Server 2008R2 (64bit)
Microsoft Windows 7 (32bit/64bit)
Microsoft Windows 8 (32bit/64bit)
Microsoft Windows Server 2012 (64bit)
3. Windows Driver Preparation
The Windows Driver is included in the enclosed CD, and Latest file versions can be
downloaded from the BIXOLON website. (www.bixolon.com)
Rev. 1.03
-3-
SRP-275II
4. Windows Driver Installation
4-1 Installing on Windows XP / Server 2003
4-1-1 Via Serial Port or Parallel Port
1) Double-click the Windows Driver installation file.
2) Click Next.
3) Select a COM port or LPT port to be used and then click Next.
Rev. 1.03
-4-
SRP-275II
4) Click Yes to reboot the PC.
5) Open the printer properties window in the Windows OS.
※ Control Panel – Printers and Faxes.
6) In the Ports tab, click Configure Port.
※ Skip this step if you are using a parallel port.
7) Match the communication settings to those of the printer. The communication settings of
the printer can be performed by conducting a self-test.
※ Skip this step if you are using a parallel port.
Rev. 1.03
-5-
SRP-275II
8) Click Print Test Page and check printing status. Proper installation of the driver is
indicated if the test page is printed normally.
Rev. 1.03
-6-
SRP-275II
4-1-2 Via USB Port
1) Double-click the Windows Driver installation file.
2) Click Next.
3) Select USB and then click Next.
4) Click OK.
Rev. 1.03
-7-
SRP-275II
5) Turn off the printer and then turn it on. The printer driver will be installed automatically.
6) Open the printer properties window in the Windows OS.
※ Control Panel – Printers and Faxes.
7) Click Print Test Page and check printing status. Proper installation of the driver is
indicated if the test page is printed normally.
Rev. 1.03
-8-
SRP-275II
4-2 Installing on Windows VISTA / Server 2008 / 7 / 8 / Server 2012
4-2-1 Via Serial Port or Parallel Port
1) Double-click the Windows Driver installation file.
2) Click Next.
3) Select a COM port or LPT port to be used and then click Next.
Rev. 1.03
-9-
SRP-275II
4) Click Yes to reboot the PC.
5) Open the printer properties window in the Windows OS.
※ Control Panel – Hardware and Sound – Device and Printers.
6) In the Ports tab, click Configure Port.
※ Skip this step if you are using a parallel port.
7) Match the communication settings to those of the printer. The communication settings of
the printer can be performed by conducting a self-test.
※ Skip this step if you are using a parallel port.
Rev. 1.03
- 10 -
SRP-275II
8) Click Print Test Page and check printing status. Proper installation of the driver is
indicated if the test page is printed normally.
Rev. 1.03
- 11 -
SRP-275II
4-2-2 Via USB Port
1) Double-click the Windows Driver installation file.
2) Click Next.
3) Select USB and then click Next.
Rev. 1.03
- 12 -
SRP-275II
4) Click OK.
5) Turn off the printer and then turn on again. The printer driver will be installed
automatically.
6) Open the printer properties window in the Windows OS.
※ Control Panel – Hardware and Sound – Device and Printers.
7) Click Print Test Page and check printing status. Proper installation of the driver is
indicated if the test page is printed normally.
8) Proper installation of the driver is indicated if the test page is printed normally.
Rev. 1.03
- 13 -
SRP-275II
5. Windows Driver Settings
The following detailed functions can be configured after installing the Windows driver.
5-1 Paper
1) Open the Printer Properties window for the corresponding OS.
2) In the General tab, click Preferences.
3) Click the Paper tab.
Rev. 1.03
- 14 -
SRP-275II
5-1-1 Paper Size
Paper size of 76 x 297 mm is selected by default, and the following sizes can be selected.
76  297 mm
76  3276 mm
If a custom paper size is required, click “…” to add or update a custom paper size. Click
Save after specifying the paper width/length and a paper name. If the specified paper
name already exists on the system, you can update the paper width/length.
Valid Paper Width
Valid Paper Length
: 25.4 mm ~ 63.5 mm
: 25.4 mm ~ 3276 mm
You can choose the new paper size on the Paper Size combo-box after adding a paper
size.
Delete button
Save button
Rev. 1.03
: Deletes the paper size selected in the list.
: Adds a new paper size or update the paper size selected in the list if
the paper name already exists on the system.
- 15 -
SRP-275II
5-1-2 Paper Type
You can choose Receipt or Ticket as paper types. Receipt allows flexible paper length
according to the data length. Ticket print in fixed length even the print data is short. The
default setting is Receipt.
Receipt
Ticket
:
:
Receipt allows flexible paper length according to the data length.
Ticket print in fixed length even the print data is short.
5-1-3 Resolution
The print resolution supported by this printer driver are 160 x 144 dots per inch, 160 x 72
dots per inch and 80 x 72 dots per inch. It is recommended to select 160 x 144 dots per
inch which is the highest resolution in the printer driver.
5-1-4 Copies
Copies are printed by specifying the copy count. The copy count is set to 1 by default. Set
this value bigger than 1 to set the number of copies to print. The value should be within the
range of 1 to 255.
5-1-5 Color
The printer can print by using black and red, or by using black only. Select Monochrome if
you want to use black color only.
Rev. 1.03
- 16 -
SRP-275II
5-2 Document Settings
1) Open the Printer Properties window for the corresponding OS.
2) In the General tab, click Preferences.
3) Click the Document Settings tab.
Rev. 1.03
- 17 -
SRP-275II
5-2-1 Send Commands
The Windows driver serves to receive the content for print from an application and send it
to the printer. The Send Commands function allows for the addition of desired commands
at the start or end of the print content.
Start Doc
Start Page
End Page
End Doc
:
:
:
:
Addition of command at the beginning of the document.
Addition of command at the beginning of the page.
Addition of command at the end of the page.
Addition of command at the end of the document.
For more information on the hexadecimals that can be entered in Start Doc, Start Page,
End Page and End Doc, refer to the Control Commands Manual.
5-2-2 Cash Drawer
To open a cash-drawer before printing, tick “Open before printing #1” or “Open before
printing #2” in the “Cash Drawer” and then click “OK”.
To open a cash-drawer after printing, tick “Open after printing #1” or “Open after printing
#2” in the “Cash Drawer” and then click “OK”.
5-2-3 Line Feed
Enter the number between 0 and 99 for adding blank lines at the end of printing.
5-2-4 Cut
Paper can be cut at the end of each page or each document (job).
Page/Job : No Cut / No Cut
Page/Job : No Cut / Partial Cut
Page/Job : Partial Cut / Partial Cut
Rev. 1.03
: Paper is not cut after printing.
: Paper is cut at the end of each document (Job).
: Paper is cut at the end of each page.
- 18 -
SRP-275II
6. Windows Driver Specifications
6-1 Fonts
This Windows driver supports various fonts in the following table. Printing using these fonts
is faster than using Windows fonts provided by the operating system.
Standard Printer Fonts
Printer Fonts
Size (Dot)
Size (Point)
FontA1x1
FontA1x1[Ext.]
FontA1x1[255]
FontA1x1(9x9)
9
FontA1x2
FontA1x2[Ext.]
FontA1x2[255]
FontA1x2(9x18)
18
FontA2x1
FontA2x1[Ext.]
FontA2x1[255]
FontA2x1(18x9)
9
FontA2x2
FontA2x2[Ext.]
FontA2x2[255]
FontA2x2(18x18)
18
FontB1x1
FontB1x1[Ext.]
FontB1x1[255]
FontB1x1(7x9)
9
FontB1x2
FontB1x2[Ext.]
FontB1x2[255]
FontB1x2(7x18)
18
FontB2x1
FontB2x1[Ext.]
FontB2x1[255]
FontB2x1(14x9)
9
FontB2x2
FontB2x2[Ext.]
FontB2x2[255]
FontB2x2(14x18)
18
Printer Fonts for Korean and Chinese
Rev. 1.03
Printer Fonts
Character size(Dot)
Size (Point)
Korean1x1
Korean1x1 (17x9)
16
Korean1x2
Korean1x2 (17x18)
32
Korean2x1
Korean2x1 (34x9)
16
Korean2x2
Korean2x2 (34x18)
32
Chinese2312_1x1
Chinese2312_1x1(16x16)
16
Chinese2312_1x2
Chinese2312_1x2(16x32)
32
Chinese2312_2x1
Chinese2312_1x1(32x16)
16
Chinese2312_2x2
Chinese2312_1x2(32x32)
32
ChineseBIG5_1x1
ChineseBIG5_1x1(16x16)
16
ChineseBIG5_1x2
ChineseBIG5_1x2(16x32)
32
ChineseBIG5_2x1
ChineseBIG5_1x1(32x16)
16
ChineseBIG5_2x2
ChineseBIG5_1x2(32x32)
32
- 19 -
SRP-275II
Printer Fonts are defined as follows.
1) FontA1x2
- ANSI Character code support (Code Page 1252)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18
2) FontA1x2[Ext]
- IBM expansion Character code support (Code Page 437)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18
3) FontA1x2[255]
- Buyer exclusive code support (User Code Page)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18
Rev. 1.03
- 20 -
SRP-275II
6-2 Special Functions
This Windows driver supports the special functions as shown in the following table.
Select the FontControl font first and use the characters in the table to use the special
functions. Take care as this function is not for printing general texts.
Character
5
6
7
a
b
c
d
e
f
g
w
x
y
A
B
C
D
E
F
G
H
I
J
K
P
Special Function
HT (0 x 09) is output
LF (0 x 0A) is output
CR (0 x 0D) is output
Open Cash drawer 2 (50ms drive pulse width)
Open Cash drawer 2 (100ms drive pulse width)
Open Cash drawer 2 (150ms drive pulse width)
Open Cash drawer 2 (200ms drive pulse width)
Open Cash drawer 2 (250ms drive pulse width)
Open Cash drawer 2 (50ms drive pulse width) without feeding
Cut without paper feeding
Align text to the left
Align text to the center
Align text to the right
Open Cash drawer 1 (50ms drive pulse width)
Open Cash drawer 1 (100ms drive pulse width)
Open Cash drawer 1 (150ms drive pulse width)
Open Cash drawer 1 (200ms drive pulse width)
Open Cash drawer 1 (250ms drive pulse width)
Open Cash drawer 1 (50ms drive pulse width) without feeding
Prints the NV bitmap image #1
Prints the NV bitmap image #2
Prints the NV bitmap image #3
Prints the NV bitmap image #4
Prints the NV bitmap image #5
Cut (partial cut)
1) Sample Use
If the FontControl font is selected and 6 is entered, the LF (Line Feeding) operation is
activated. (This does not entail the printing of the character “6”.)
2) “FontControl” Font Function
Printer Font for
Special Function
FontControl
Rev. 1.03
Function
Justification (Left/Center/Right)
Output HT, Output LF, Output CR
Barcode Printing
Print NV Graphic Data
- 21 -
Size (Point/Dot)
( 9 / 9x9 )
SRP-275II
7. Use of Windows Driver
7-1 Use of Visual Basic
This section contains example codes to control the printer using Windows driver with
Visual Basic. Sample codes contained in the CD.
7-1-1 Windows Driver Selection
The following code is an example of the selection of the “BIXOLON SRP-275II” Windows
Driver.
For Each prnPrinter In Printers
If prnPrinter.DeviceName = “BIXOLON SRP-275II” Then
Set Printer = prnPrinter
Exit For
End If
Next
7-1-2 Text Printing
The following code is an example of the printing of Arial Test via the Windows font, and
FontA1x1Test via the printer font.
‘Print in Windows font
Printer.FontSize = 9
Printer.FontName = “Arial”
Printer.Print “Arial Test”
‘Print in printer font
Printer.FontSize = 9
Printer.FontName = “FontA1x1”
Printer.Print “FontA1x1Test”
Printer.EndDoc
Rev. 1.03
- 22 -
SRP-275II
7-2 Use of Wordpad
7-2-1 WordPad Environment Settings
After running WordPad and setting the following conditions, conduct a test.
- Select Printer
After selecting “Print” from the “File” menu, select the printer (BIXOLON SRP-275II).
- Select Paper Size, Orientation, and Margins
After selecting “Page Setup” from the “File” menu, select the paper size, orientation,
and margins.
7-2-2 Text Printing
Use the Windows Driver of the printer to run a test.
1) Select the desired font from the Font menu (FontA1x1).
2) Select the desired font size (9).
3) Enter the text to be printed in WordPad.
4) Click the Print button in the toolbar to print.
Rev. 1.03
- 23 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising