Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO, Point

Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO, Point
Created on: Friday 09 June, 2017
Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO,
Point-to-Multipoint Wireless Bridge
Product Name: Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO, Point-to-Multipoint Wireless Bridge
Manufacturer: Ubiquiti Networks
Model Number: NB-5G22
Please Note: The Ubiquiti NanoBridge NBM5 22dBi has been discontinued. For an alternative,
we recommend the Ubiquiti Nanobeam or the Ubiquiti Powerbeam range.
Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO, Point-to-Multipoint Wireless Bridge
Please Note: For a typical set-up a Pole Mount is required.
Ubiquiti NanoBridge NBM5 22dBi Key Features
• Model: NBM5 5GHz
• Hi-Performance, Long Range
• Completely Integrated CPE in the Feed of the Antenna
InnerFeed Antenna Technology
Ubiquiti's revolutionary InnerFeed technology integrates the entire radio system into the
feedhorn of an antenna. The Ubiquiti NanoBridge NBM5 22dBi combines Ubiquiti's Innerfeed and
AirMax (MIMO TDMA Protocol) technologies to create a simple, yet extremely powerful and
robust wireless unit capable of 100+Mbps real outdoor throughput and up to 30km+ range.
Complete antenna and radio system integration provides revolutionary cost/performance
solutions to the Worldwide Broadband Industry.
The low cost, hi-performance, and robust all-in-one design of Ubiquiti NanoBridge M make it
extremely versatile and ideal in several different applications.
The Ubiquiti NanoBridge NBM5 22dBi as a powerful wireless client. Using two Ubiquiti
NanoBridge NBM5 22dBis to create a powerful, long range, PTP (point to point) link.
Integrated AirMax Technology
Unlike standard WiFi protocol, Ubiquiti's Time Division Multiple Access (TDMA) AirMax protocol
allows each client to send & receive data using pre-designated time slots scheduled by an
intelligent AP controller. This "time slot" method eliminates hidden node collisions &
maximizes air time efficiency. It provides many magnitudes of performance improvements in
latency, throughput, & scalability compared to all other outdoor systems in its class.
• Intelligent QoS - Priority is given to voice/video for seamless access.
• Scalability - High capacity and scalability.
• Long Distance - Capable of high speed Carrier Class links
• Latency - Multiple features dramatically reduce noise.
• AirMax Clients - Up to 300 clients can be connected per AirMax BaseStation.
Models
• Ubiquiti NanoBridge M5-22 5GHz, 22 dBi Product ID: NB-5G22
• Ubiquiti NanoBridge M5-25 5GHz, 25 dBi Product ID: NB-5G25
Software
airOS
AirOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally
intuitive and was designed to require no training to operate. Behind the user interface is a
powerful firmware architecture which enables hi-performance outdoor multipoint networking.
www.4gon.co.uk | op@support.4gon.co.uk | Page 1/3
Created on: Friday 09 June, 2017
Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO,
Point-to-Multipoint Wireless Bridge
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support
airView
Integrated on all Ubiquiti M products, AirView provides Advanced Spectrum Analyzer
Functionality: Waterfall, waveform, and real-time spectral views allow operators to identify noise
signatures and plan their networks to minimize noise interference.
• Waterfall - Aggregate energy over time for each frequency.
• Waveform - Aggregate energy collected.
• Real-time - Energy is shown real-time as a function of frequency.
• Recording - Automize AirView to record and report results.
airControl
AirControl is a powerful and intuitive web based server network management application which
allows operators to centrally manage entire networks of Ubiquti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
Ubiquiti NanoBridge NBM5 22dBi - Technical Specifications
System Information
• Processor Specs: Atheros MIPS 24KC, 400MHz
• Memory Information: 32MB SDRAM, 8MB Flash
• Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet
Regulatory / Compliance Information
• Wireless Approvals: FCC Part 15.247, IC RS210, CE
• RoHS Compliance: Yes
Physical / Electrical / Environmental
• Enclosure Characteristics: Outdoor UV Stabilized Plastic
• Mounting Kit: Pole Mounting Kit included
• Power Supply: 24V, 1A POE Supply included
• Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
• Operating Temperature: -30C to 75C
• Operating Humidity: 5 to 95% Condensing
• Shock and Vibration: ETSI300-019-1.4
• Dimensions: 400 mm diameter
• Weight: 1565g
• Max Power Consumption: 5.5 Watts
www.4gon.co.uk | op@support.4gon.co.uk | Page 2/3
Created on: Friday 09 June, 2017
Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO,
Point-to-Multipoint Wireless Bridge
• Antenna Gain: 22 dBi (M5-22) or 25 dBi (M5-25)
For output power and operating frequencies, please see the Ubiquiti NanoBridge M5 Datasheet.
Please visit the Ubiquiti Firmware page for the latest Firmware upgrades -
Please Enquire
Options available for Ubiquiti NanoBridge NBM5 22dBi Carrier Class MIMO, Point-to-Multipoint Wireless Bridge :
Type of POE Power Cable Required
None, Using Compatible PoE, EU Power Cable (+£2.50), UK Power Cable (+£2.50).
POE Mount
Require Ubiquiti POE Mount (+£4.50), Not Required.
www.4gon.co.uk | op@support.4gon.co.uk | Page 3/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising