Ubiquiti NanoStation Loco M900 MIMO Wireless Bridge

Ubiquiti NanoStation Loco M900 MIMO Wireless Bridge
Created on: Friday 09 June, 2017
Ubiquiti NanoStation Loco M900 MIMO Wireless Bridge/Base
Station
Product Name: Ubiquiti NanoStation Loco M900 MIMO Wireless Bridge/Base Station
Manufacturer: Ubiquiti Networks
Model Number: LOCOM900
Ubiquiti NanoStation Loco M900 MIMO, Point-to-Point Wireless Bridge/Base Station (LOCOM900)
Please note that the Ubiquiti NanoStation M900 Loco has a long Estimated Time of Arrival (ETA).
We recommend the Ubiquiti NanoStation M2 as the nearest alternative for availability.The Ubiquiti
NanoStations are not 802.3af compliant. You will require a Ubiquiti Instant 802.3af Outdoor
Adapter. If required, select one above or visit our product page. Alternatively, use the supplied
Ubiquiti PoE-24 POE Adapter with our optional mains cable to power from a mains point or a
suitable Ubiquiti TOUGHSwitch.
The Ubiquiti NanoStation Loco M900 take the same concept from the original Ubiquiti
NanoStation with new redesigned sleek and elegant form-factors.Ubiquiti NanoStation Loco M9
Features
• Frequency - 900 MHz
• Throughput - 150+ Mbps
• Range - 10+ km
• Product Model Number: LOCOM900
Next-Gen Antenna DesignNew antenna array designs featuring 16dBi dual-polarity gain at
5GHz and 11dBi dual-polarity 11dBi at 2.4GHz. Both with optimized cross-polarity isolation
and in a compact form-factor.Dual Ethernet ConnectivityThe New Ubiquiti NanoStation M provides
a secondary ethernet port with software enabled POE output for seamless IP Video
integration.Intelligent POERemote hardware reset circuitry of Ubiquiti NanoStation M allows for
device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation
can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter.
Remote reset is an additional option. Ubiquiti NanoStation M comes standard as 24V without
remote reset.
Please visit the Ubiquiti Firmware page for the latest Firmware upgrades
Price: £115.00
Options available for Ubiquiti NanoStation Loco M900 MIMO Wireless Bridge/Base Station :
Type of POE Power Cable Required
None, Using Compatible PoE, EU Power Cable (+£2.50), UK Power Cable (+£2.50).
802.3af Outdoor Adapter
Not Required, Ubiquiti Instant 802.3af Outdoor Adapter (+£15.40).
POE Mount
Require Ubiquiti POE Mount (+£4.50), Not Required.
Need Product Setup / Training / Support?
Required - 1 Hour (+£65.00), Not Required.
www.4gon.co.uk | op@support.4gon.co.uk | Page 1/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising