Cat® 316F L Hydraulic Excavator

Cat® 316F L Hydraulic Excavator
Cat 316F L
Hydraulic Excavator
• C4.4 ACERT™ U.S. EPA Tier 4 Final/EU Stage IV engine
• Same working range, similar stick and bucket force and swing
torque as 316E
• Equipped to run on up to B20 biodiesel fuel
• Two power modes, high power and eco mode, to help manage
fuel consumption
• Auto engine idle shutdown to save fuel, reduce emissions,
and extend service intervals
Routine maintenance points at ground level
Wide service doors for easy access
Filters grouped to reduce service time
Cooling package designed to prevent plugging, make blowing off
debris easy
• Cat ® buckets and tools designed to maximize machine performance
• Auxiliary hydraulics available to support a variety of tools
• Available tool control and quick coupler for speedy tool changes
• Cat Connect technology to improve job site efficiency
• Available Cat Grade Control to help operators create a level base
and precise slope with ease
• Product Link™/VisionLink ® to connect owners to the machine,
providing access to location, hours, fuel consumption, idle time,
events, and diagnostic codes
• Full-size ROPS certified cab
• Adjustable joysticks and seats with air suspension and heat
and cooling options
• Monitor programmable in 42 languages
• Automatic climate control system
• Drink holder and easy-to-reach storage areas
• Auxiliary power outlets
• Modified X-frame structure for enhanced service life
• Robot welded, Caterpillar designed boom and sticks
• Greased track link between pins and bushings to increase
undercarriage life
• Hydraulic activation lever to lock out all hydraulic functions
• Handrail, anti-skid plating, countersunk bolts to reduce slipping
and tripping
• Ground-level fuel cutoff switch to shut down engine
• Standard rearview camera and mirrors for enhanced visibility
Cat 316F L Hydraulic Excavator
Sound Performance
Engine Model
Cat C4.4 ACERT
ISO 6396 – Operator Sound Pressure Level
71 dB(A)
Exterior Sound Power Level
101 dB(A)
Net Power – SAE J1349/ISO 9249
88 kW
117 hp/118 PS
Net Power – ISO 14396
91 kW
122 hp/123 PS
Gross Power – SAE J1995
91 kW
122 hp/123 PS
105 mm
4.13 in
127 mm
5.00 in
4.4 L
269 in3
Shipping Height
3090 mm
Shipping Length
8570 mm
Tail Swing Radius
2500 mm
Hydraulic System
Main System – Maximum Flow (Total)
Maximum Pressure – Equipment
Reach Boom – 5.1 m (16'9")
R2.6 m (8'6")
300 L/min
79 gal
Length to Center of Rollers
3040 mm
35 MPa
5,076 psi
Track Length
3970 mm
Maximum Pressure – Travel
35 MPa
5,076 psi
Ground Clearance
440 mm
Maximum Pressure – Swing
23 MPa
3,336 psi
Track Gauge
1990 mm
Pilot System – Maximum Flow
26.1 L/min
1,593 in3/min
Transport Width – 700 mm (28") Shoes
2690 mm
Pilot System – Maximum Pressure
4120 kPa
598 psi
Cab Height
2890 mm
Cab Height with Top Guard
3100 mm
Counterweight Clearance
1010 mm
Maximum Travel Speed
5.2 km/h
3.2 mph
Maximum Drawbar Pull
156 kN
35,053 lbf
Working Ranges*
Reach Boom – 5.1 m (16'9")
Machine Weights
R2.6 m (8'6")
Minimum Operating Weight
17 420 kg
38,410 lb
Maximum Digging Depth
6090 mm
Maximum Operating Weight
18 010 kg
39,710 lb
Maximum Reach at Ground Level
8780 mm
Swing Speed
8.9 rpm
Swing Torque
49.6 kN∙m
36,582 lbf-ft
Service Refill Capacities
Maximum Cutting Height
8920 mm
Maximum Loading Height
6280 mm
Minimum Loading Height
2300 mm
Maximum Depth Cut for 2440 mm (8'0")
Level Bottom
5870 mm
Maximum Vertical Wall Digging Depth
4930 mm
Fuel Tank Capacity
290 L
76.61 gal
DEF Tank Capacity
44 L
11.62 gal
Cooling System
24 L
6.34 gal
13.5 L
3.57 gal
Bucket Type
Swing Drive
2.11 gal
Bucket Digging Force (SAE)
98 kN
22,000 lbf
Final Drive (each)
2.11 gal
Bucket Digging Force (ISO)
111 kN
25,000 lbf
Hydraulic System (including tank)
121 L
31.96 gal
Stick Digging Force (SAE)
69 kN
15,500 lbf
Hydraulic Tank
106 L
28.00 gal
Stick Digging Force (ISO)
80 kN
18,000 lbf
Engine Oil (with filter)
Bucket & Stick Forces*
Reach Boom – 5.1 m (16'9")
R2.6 m (8'6")
General Duty Bucket
*With a 0.76 m3 (1.00 yd3), 900 mm (41") bucket.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
© 2016 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment.
See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
AEXQ1664-01 (01-2016)
Replaces AEXQ1664
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF