M312 M315 M318 M320

M312 M315 M318 M320
®
M312/M315
M318/M320
Material Handler and
Industrial Arrangement
Material Handler
Operating Weight
Maximum Reach
Industrial Arrangement
Operating Weight
Maximum Reach
M312
M315
M318
M320
–
–
–
–
20 300 kg
10.5 m
22 300 kg
11.6 m
13 300 kg
8m
15 500 kg
8.4 m
17 600 kg
8.6 m
–
–
M318 MH and M320 MH Material Handler
M312, M315 and M318 Industrial Arrangement
A step forward in hydraulic
cab riser design
The hydraulic cab riser is designed
to meet customers’ needs for easier
operation and greater stability.
The added stability of the extra rigid
design, combined with a high viewing
position, helps improve operator
confidence. The riser design also
provides low machine height while
roading. The hydraulically adjustable
cab linkage is designed to reduce
vibration in the cab, improving
operator comfort.
1.2 meter fixed cab riser
A 1.2 m fixed cab riser is offered for
the M318 and M320 standard and
material handling machines, where
a high viewing position is needed.
2
300 Family styling
The cab and body have smooth,
rounded contours, and the roading lights
are blended in for a modern look.
Cab interior combines functional layout
and pleasing color scheme.
Advanced hydraulic technology
The hydraulic system is designed
specifically for material-handling
applications using the most advanced
hydraulic technology.
Structures
For maximum strength and reliability,
all structures were designed using Finite
Element Analysis (FEA) to achieve an
optimum balance of weight reduction
versus fatigue strength. The cab
linkage was analyzed by static and
dynamic methods to achieve a very
stable support for the cab, with lower
vibrations to the operator.
High lift capacities
The lift charts demonstrate the high lift
capacities of the M300 Family material
handlers. An optional “Heavy Lift”
hydraulic circuit increases the pressure
by 12 percent to 370 bar to achieve up
to 17 percent higher lift capacities.
Exceptional ease of maintenance
and serviceability
All daily maintenance points are
accessible from ground level.
The front attachment can be greased
at ground level through a centralized
greasing port.
Cat ’5 Star Customer Service’
Turns your investment into profit, from
purchase to resale through:
■ Equipment Management Services
for optimum profit
■ Maintenance Services for equipment
protection
■ Predictive Services for optimum
availability
■ Reconditioning Services for lower
repair cost
■ Your Caterpillar dealer for
satisfaction and peace of mind
3
M318 MH and M320 MH 1.2 m Fixed Cab Riser
M318 and M320 Material Handlers
combine the versatility of a wheel
excavator with the specific purpose
of a material handling machine.
Material handling versions have all
the features that provide standard models
with superior mobility, flexibility
and durability.
Standard MH models offer a straight
boom, a material handling drop nose
stick and extended outriggers.
The M320 MH also has a 600 kg
additional counterweight.
“Heavy lift” hydraulic circuit and
solid tires are available as options.
Solid tires are recommended in scrap
handling applications.
Other options, such as the waste handling
package and large mesh radiator,
help maintain a cleaner cab and
radiator in waste applications and
dusty conditions.
The fixed cab riser offers a very stable
and comfortable method to raise the cab.
The fixed cab riser lifts the cab by 1.2 m
to offer better viewing to all sides.
In shipping position, the cab is unmounted
to meet national road regulations.
M300 Structure analysis
Finite Element Analysis
FEA was used to design a very stable and reliable base frame
and upper structure. For maximum strength and best
operating range, all linkage parts including booms and sticks,
were analyzed to achieve an optimal balance of weight
reduction and fatigue strength.
In addition to the static analysis of all structures, the linkage
was analyzed with dynamic finite element methods.
Load cases, especially material handling applications,
were developed to achieve optimal structure durability.
4
The cab offers the same comfort and
convenience as the standard cab.
Well-positioned steps lead continuously
from ground level to the raised cab.
Sound suppression panels reduce interior
sound to an industry leading level,
to provide excellent operator comfort.
M318 MH and M320 MH Hydraulic Cab Riser
Hydraulic cab riser design
provides the most suitable solution
when high flexibility in cab height
is needed. The lift arms on the hydraulic
cab riser are box-section designed for
greater cab stability. Two heavy-duty
hydraulic cylinders provide quick and
controlled up and down travel.
With the cab in topmost position,
the cylinders are retracted to ensure
excellent stability. In the event of a
hydraulic malfunction, the cab can be
lowered using either a lever inside
the cab or one on the frame at ground
level. The linkage is a parallelogram
design, which keeps the cab level in
all positions.
Hydraulic cab riser in the top position
raises the cab by 2.0 meters.
This provides optimal viewing to
all sides in different applications
such as scrap handling, log handling,
and various load/unload tasks.
The cab’s position is infinitely variable.
Hydraulic cab riser in medium position
places the cab forward by 0.5 meters
more than in the travel position,
for increased visibility.
Hydraulic cab riser in bottom position
is used for shipping and travel position.
When equipped with a VA boom or
one-piece-boom, this is the only position
allowed for travelling on public roads.
5
Engine
Hydraulic System
Caterpillar four-stroke-cycle, six cylinder 3116 DIT direct
injection turbocharged diesel engine.
Closed center, variable flow, load-sensing hydraulic system.
Load-sensing axial-piston pump powers boom, stick, grapple,
outriggers/dozer, and travel circuit.
Ratings at 2000 rpm
Gross power
Net power
ISO 9249
EEC 80/1269
M318 MH
M320 MH
kW/hp
kW/hp
104.4/140
104.4/140
98/131
98/131
98/131
98/131
g/kWh
g/kWh
0.38
1.32
6.20
0.38
1.32
6.20
dB(A)
dB(A)
Measured Emission Values*
Hydrocarbons (HC)
Carbon Monoxide (CO)
Nitrous Oxide (NOX)
Noise levels
**LPA = 78
**LPA = 73
**LWA = 100 **LWA = 102
Main Hydraulic System
Maximum flow
Maximum pressure
Implements
Travel
M318 MH
260 l/min
M320 MH
320 l/min
330 bar
330 bar
330 bar
330 bar
Swing Mechanism
Dedicated variable displacement axial-piston pump and fixeddisplacement axial-piston motor powers the swing mechanism.
M318 MH
112 l/min
315 bar
9.4 rpm
* ISO 8178
** Dynamically measured according to ISO 6396 or 95/27/EC
Swing system
Maximum flow
Maximum pressure
Maximum swing speed
Transmission
Service Refill Capacities
M320 MH
112 l/min
340 bar
8.4 rpm
2-gear power-shift transmission. Permanent all wheel drive.
Speeds
1st gear, forward/reverse (work)
2nd gear, forward (travel)
2nd gear, reverse
Creeper speed
Gradeability
Steering/Tires
Fully hydraulic, powered by a separate
gear pump mounted on the engine.
Steering angle
Standard tires
Optional solid tires
6
35°
11.00-20
10.00-20
5 km/h
20 km/h
20 km/h
2.8 km/h
61%
M320 MH
Liters
Liters
320
35
21
12
11
2
1.5
3
220
135
370
35
21
12
11
2
1.5
3
300
205
Fuel Tank
Cooling
Lubrication (engine)
Rear axle housing, differential
Front steering axle, differential
Final drives, front (each)
Final drives, rear (each)
Powershift transmission
Hydraulic system (including tank)
Hydraulic tank
Maestro Mobile
Electronic Control System
The microcontroller monitors and
controls a whole set of engine and
hydraulic parameters.
M318 MH and M320 MH specifications
M318 MH
Axles/Brakes
Planetary axles with planetary gear
reduction final drives located in the
axle hubs. Fully hydraulic brake system
with separate gear pump.
Axle static load capacity
40 000 kg
Shipping dimensions
M320 MH and M318 MH hydraulic cab riser/fixed cab riser. Dimensions include hoses and tubes.
B
E
A
C
G
F
J
H
I
K
D
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Cab height
Shipping length
Boom height
Support point distance
Tail swing radius
Wheel base
Counterweight clearance
Swing center to rear axle
Rear axle to stabilizer
Stabilizer clearance
Overall length over stabilizers
Undercarriage width
Stabilizer width on ground
Overall width of upper frame
1.2 m fixed cab riser
Shipping height
Cab height
M318 MH
3185 mm
8890 mm
3370 mm
3000 mm
2450 mm
2750 mm
1307 mm
1250 mm
800 mm
338 mm
5175 mm
2690 mm
3900 mm
2500 mm
M320 MH
3185 mm
9920 mm
3350 mm
3615 mm
2700 mm
2750 mm
1307 mm
1250 mm
800 mm
338 mm
5175 mm
2690 mm
4150 mm
2650 mm
*3600 mm
4350 mm
*3600 mm
4350 mm
N
L
M
* Cab removed, back rest tilted forward
M318 MH and M320 MH specifications
7
Working Ranges M318 MH
With Straight Boom 6.2 m and Material Handling Stick 4.5 m
m
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
m
4
3
2
1
0
-1
-2
m
Working Ranges M320 MH
With Straight Boom 6.8 m and Material Handling Stick 4.9 m
m
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
12
8
11
10
9
8
7
6
5
M318 MH and M320 MH specifications
Lift Capacities M318 MH
With Straight Boom 6.2 m and Material Handling Stick 4.5 m, front and rear stabilizers and standard tires.
All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
7.50 m
All stabilizers up
All stabilizers down
6.00 m
All stabilizers up
All stabilizers down
m
5.4
*6.3
3.8
*6.3
3.8
*5.1
2.6
4.8
*2.1
*2.1
1.9
*2.1
8.9
*7.8
*7.8
5.8
*7.8
5.3
*6.5
3.7
*6.5
3.7
*5.5
2.6
4.7
2.7
*4.1
1.9
3.5
*2.1
*2.1
1.6
*2.1
9.7
8.2
*8.6
5.5
*8.6
5.1
*6.8
3.5
6.6
3.6
*5.7
2.5
4.6
2.7
*4.8
1.8
3.5
*2.0
*2.0
1.4
*2.0
10.2
All stabilizers up
3.00 m
All stabilizers down
7.6
*9.5
5.0
*9.5
4.9
*7.2
3.3
6.3
3.5
*5.8
2.3
4.5
2.6
*4.8
1.8
3.4
2.0
*2.1
1.3
*2.1
10.5
All stabilizers up
1.50 m
All stabilizers down
7.0
*10.0
4.4
9.4
4.6
*7.4
3.0
6.0
3.3
*5.8
2.2
4.3
2.5
*4.7
1.7
3.3
6.6
*9.6
4.1
9.0
4.4
*7.2
2.8
5.8
3.2
*5.6
2.1
4.2
2.5
*4.3
1.6
3.2
4.2
*6.3
2.7
5.6
All stabilizers up
4.50 m
All stabilizers down
0.00 m
All stabilizers up
All stabilizers down
-1.50 m
All stabilizers up
All stabilizers down
*10.4
*10.4
*3.7
*3.7
*10.4
*10.4
*3.7
*3.7
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
Lift Capacities M318 MH
With Straight Boom 6.2 m and Material Handling Stick 4.5 m, front and rear stabilizers and standard tires and
“Heavy Lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
9.00 m
All stabilizers up
All stabilizers down
5.4
*6.0
3.8
*6.0
7.50 m
All stabilizers up
All stabilizers down
5.4
*7.1
3.8
6.9
3.8
*5.7
2.6
4.8
All stabilizers up
6.00 m
All stabilizers down
*2.4
*2.4
1.9
*2.4
8.91
8.6
*8.8
5.8
*8.8
5.3
*7.3
3.7
6.8
3.7
*6.3
2.6
4.7
2.7
*4.6
1.9
3.5
*2.3
*2.3
1.6
*2.3
9.71
8.2
*9.7
5.5
*9.7
5.1
*7.7
3.5
6.6
3.6
*6.5
2.5
4.6
2.7
*5.5
1.8
3.5
2.2
*2.3
1.4
*2.3
10.23
All stabilizers up
3.00 m
All stabilizers down
7.6
*10.8
5.0
10.1
4.9
*8.2
3.3
6.3
3.5
*6.6
2.3
4.5
2.6
5.5
1.8
3.4
2.0
*2.3
1.3
*2.3
10.50
1.50 m
All stabilizers up
All stabilizers down
7.8
*13.5
5.0
12.0
5.1
*9.9
3.4
7.5
3.7
*7.8
2.5
5.3
2.8
6.0
1.9
4.1
0.00 m
All stabilizers up
All stabilizers down
6.6
*11.0
4.1
9.0
4.4
*8.2
2.8
5.8
3.2
*6.4
2.1
4.2
2.5
*5.0
1.6
3.2
-1.50 m
All stabilizers up
All stabilizers down
4.2
*7.3
2.7
5.6
All stabilizers up
4.50 m
All stabilizers down
*11.7
*11.7
*4.2
*4.2
10.6
*11.7
*4.2
*4.2
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
M318 MH and M320 MH specifications
9
Lift Capacities M320 MH
With Straight Boom 6.8 m and Material Handling Stick 4.9 m, 600 kg additional counterweight.
All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
7.50 m
All stabilizers up
All stabilizers down
6.3
*7.1
4.5
*7.1
4.4
*6.2
3.1
6.0
3.2
*5.4
2.2
4.5
2.6
*2.8
1.8
*2.8
10.10
6.00 m
All stabilizers up
All stabilizers down
6.2
*7.4
4.3
*7.4
4.3
*6.3
3.0
5.9
3.2
*5.5
2.2
4.4
2.3
*2.8
1.5
*2.8
10.81
All stabilizers up
4.50 m
All stabilizers down
9.4
*10.1
6.3
*10.1
5.9
*7.9
4.1
*7.9
4.1
*6.5
2.9
5.8
3.1
*5.5
2.1
4.3
2.1
*2.7
1.4
*2.7
11.28
All stabilizers up
3.00 m
All stabilizers down
8.6
*11.2
5.6
*11.2
5.5
*8.4
3.7
7.9
3.9
*6.7
2.7
5.6
3.0
*5.6
2.0
4.2
2.0
*2.8
1.3
*2.8
11.53
All stabilizers up
1.50 m
All stabilizers down
7.9
*11.8
5.0
*11.8
5.1
*8.6
3.4
7.5
3.7
*6.8
2.5
5.3
2.8
*5.5
1.9
4.1
0.00 m
All stabilizers up
All stabilizers down
7.4
*10.8
4.6
*10.8
4.9
*8.4
3.2
7.2
3.6
*6.6
2.3
5.2
2.8
*5.2
1.8
4.0
-1.50 m
All stabilizers up
All stabilizers down
4.7
*7.5
3.0
7.0
3.5
*5.9
2.2
5.1
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
Lift Capacities M320 MH
With Straight Boom 6.8 m and Material Handling Stick 4.9 m, 600 kg additional counterweight, “Heavy Lift” arrangement.
All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
9.00 m
All stabilizers up
All stabilizers down
6.4
*8.0
4.5
*8.0
4.4
*7.0
3.1
6.1
3.2
*3.8
2.2
*3.8
7.50 m
All stabilizers up
All stabilizers down
6.3
*8.1
4.5
*8.1
4.4
*7.0
3.1
6.0
3.2
*6.2
2.2
4.4
2.6
*3.2
1.7
*3.2
10.10
All stabilizers up
6.00 m
All stabilizers down
6.2
*8.4
4.3
*8.4
4.3
*7.2
3.0
5.9
3.2
*6.2
2.2
4.4
2.3
*3.1
1.5
*3.1
10.81
All stabilizers up
4.50 m
All stabilizers down
9.4
11.4
6.3
*11.4
5.9
*9.0
4.1
8.3
4.1
*7.4
2.9
5.8
3.1
6.2
2.1
4.3
2.1
*3.1
*1.4
3.0
11.28
All stabilizers up
All stabilizers down
8.6
*12.7
5.6
12.7
5.5
*9.5
3.7
7.9
3.9
*7.7
2.7
5.6
3.0
6.1
2.0
4.2
2.0
*3.2
1.3
2.8
11.53
All stabilizers up
1.50 m
All stabilizers down
7.8
*13.5
5.0
12.0
5.1
*9.9
3.4
7.5
3.7
*7.8
2.5
5.3
2.8
6.0
1.9
4.1
0.00 m
All stabilizers up
All stabilizers down
7.4
*12.1
4.6
11.4
4.9
*9.6
3.1
7.2
3.6
*7.5
2.3
5.2
2.7
5.9
1.8
4.0
-1.50 m
All stabilizers up
All stabilizers down
4.7
*8.7
3.0
7.0
3.4
*6.8
2.2
5.1
3.00 m
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
10
M318 MH and M320 MH specifications
M312, M315 and M318 Industrial Arrangement
Industrial sticks
Two boom/stick configurations are
available for each of the M300 Family
machines. The industrial stick can be
attached to either the one-piece-boom or
the hydraulically adjustable VA boom
to better meet application needs.
M318 wide gauge undercarriage
The wide gauge undercarriage,
available for the M318, gives more
stability to the machine when working
at long reach, over the side without
stabilizers. Width of the wide gauge
axles is 2.68 meters, making them
7 percent wider than the standard
undercarriage. A 2.75 meter dozer
blade, compared to the standard
2.5 meter blade, is also available.
11
Engine
Axles/Brakes
Caterpillar four-stroke-cycle, four cylinder 3054 DITA direct injection turbocharged
diesel engine (M312 and M315). Caterpillar four-stroke-cycle, six cylinder 3116 DIT
direct injection turbocharged diesel engine (M318).
Planetary axles with planetary gear
reduction final drives located in the axle
hubs. Fully hydraulic brake system with
separate gear pump.
Ratings at 2000 rpm
Gross power
M312
M315
M318
kW/hp
kW/hp
kW/hp
85.1/114
92.4/124
103.5/139
The following ratings apply at 2000 rpm
when tested under the conditions for the specified standard:
Net power
ISO 9249
EEC 80/1269
kW/hp
kW/hp
81.1/108.7
81.1/108.7
83.8/112
83.8/112
98/131
98/131
100 mm
127 mm
3.99 liters
450 Nm
8% at 1400 rpm
*LPA = 72 dB(A)
*LWA = 99 dB(A)
Measured Emission Values**
Hydrocarbons (HC)
Carbon Monoxide (CO)
Nitrous Oxide (NOX)
100 mm
127 mm
3.99 liters
102 mm
130 mm
6.6 liters
450 Nm
608 Nm
16% at 1500 rpm 21% at 1500 rpm
*LPA = 75 dB(A)
*LPA = 78 dB(A)
*LWA = 99 dB(A) *LWA = 100 dB(A)
g/hph
g/hph
g/hph
0.212
0.511
8.113
0.212
0.511
8.113
0.38
1.32
6.20
* Dynamically measured according to ISO6396 or 95/27/EC.
** ISO 8178
Fully hydraulic, powered by a separate
gear pump mounted on the engine.
Steering angle
Standard tires
Optional solid tires
The microcontroller monitors and
controls a whole set of engine and
hydraulic parameters.
Swing Mechanism
Closed center, variable flow, load-sensing hydraulic system.
Load-sensing axial-piston pump powers boom, stick, bucket,
outriggers/dozer and travel circuit.
Dedicated variable displacement axial-piston pump
and fixed-displacement axial-piston motor powers
the swing mechanism.
Main Hydraulic System
Maximum flow
Maximum pressure
Implements
Travel
Swing system
Maximum flow
Maximum pressure
Swing torque
Maximum swing speed
12
35°
10.00-20
10.00-20
Maestro Mobile
Electronic Control System
Hydraulic System
Pilot System
Maximum flow
Maximum pressure
26 000 kg
30 000 kg
Steering/Tires
Dimensions
Bore
Stroke
Displacement
Maximum torque
Torque rise
Noise levels
kW/hp
Axle static load capacity
M312
M315/M318
M312
M315
M318
190 l/min 220 l/min 260 l/min
330 bar
330 bar
330 bar
330 bar
330 bar
330 bar
15 l/min
25 bar
15 l/min
30 bar
15 l/min
25 bar
M312, M315 and M318 Industrial Arrangement specifications
M312
M315
M318
80 l/min 80 l/min 112 l/min
350 bar
370 bar
315 bar
31 kNm 36.5 kNm 46.4 kNm
11 rpm 10.1 rpm
9.4 rpm
Transmission
Service Refill Capacities
2-gear power-shift transmission. Permanent all wheel drive.
Speeds
1st gear forward/reverse
(work)
2nd gear forward
(travel)
2nd gear reverse
Creeper speed
Drawbar pull
Gradeability
M312
M315
M318
9 km/h
9 km/h
9 km/h
34 km/h
20 km/h
3.8 km/h
70 kN
57%
34 km/h
20 km/h
3.8 km/h
91 kN
67%
34 km/h
20 km/h
3.8 km/h
91 kN
61%
Fuel Tank
Cooling
Lubrication (engine)
Rear axle housing, differential
Front steering axle, differential
Final drives, front (each)
Final drives, rear (each)
Powershift transmission
Hydraulic system (including tank)
Hydraulic tank
M312
M315
M318
Liters
Liters
Liters
230
35
9
11
7
2
2
3
180
95
240
30
9
11
8.5
2
2
3
210
115
320
35
21
11
8.5
2
2
3
220
135
Shipping Dimensions
Including hoses and tubes.
B
A
C
D
E
A
B
C
D
E
Shipping height
Shipping length
Cab height
Counterweight clearance
Support point distance
M312
3070 mm
7870 mm
3070 mm
1262 mm
3220 mm
One-piece boom
M315
M318
3080 mm
3160 mm
8260 mm
9010 mm
3080 mm
3100 mm
1262 mm
1280 mm
3290 mm
3440 mm
M312
3070 mm
8120 mm
3070 mm
1262 mm
3550 mm
VA boom
M315
3130 mm
8470 mm
3080 mm
1262 mm
3720 mm
M312, M315 and M318 Industrial Arrangement specifications
M318
3220 mm
8920 mm
3100 mm
1280 mm
3535 mm
13
Working Ranges M312 VA boom
With VA boom 5.25 m and industrial stick 2.8 m.
m
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M312 VA boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
6.00 m
All stabilizers down
*3.1
*3.1
*3.1
*3.1
*2.9
*2.9
2.3
*2.9
4.50 m
All stabilizers up
All stabilizers down
*3.5
*3.5
*3.5
*3.5
*3.4
*3.4
2.3
*3.4
3.00 m
All stabilizers up
All stabilizers down
*7.5
*7.5
5.8
*7.5
*5.0
*5.0
3.3
*5.0
3.4
*4.1
2.3
*4.1
2.5
*2.9
1.6
*2.9
*2.0
*2.0
1.4
*2.0
7.88
1.50 m
All stabilizers up
All stabilizers down
*7.8
*7.8
5.7
*7.8
5.0
*6.1
3.3
*6.1
3.4
*4.6
2.3
4.1
2.4
*3.5
1.5
3.0
*2.1
*2.1
1.4
*2.1
7.98
All stabilizers up
0.00 m
All stabilizers down
*9.3
*9.3
*5.8
*9.3
5.1
*6.7
3.3
6.2
3.4
*4.9
2.1
4.2
2.4
*3.5
1.5
2.9
2.2
*2.3
1.4
*2.3
7.78
All stabilizers up
-1.50 m
All stabilizers down
9.7
*10.5
5.5
*10.5
5.1
*6.8
3.1
6.3
3.2
*5.0
2.0
4.0
2.4
*2.8
1.5
*2.8
7.25
All stabilizers up
-3.00 m
All stabilizers down
9.8
*10.9
5.4
*10.9
4.9
*6.9
2.9
6.3
3.1
*4.5
1.9
4.0
2.9
*3.7
1.8
3.7
6.32
All stabilizers up
All stabilizers down
*8.7
*8.7
5.2
*8.7
-4.50 m
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
14
M312, M315 and M318 Industrial Arrangement specifications
Working Ranges M312 One-piece-boom
With One-piece-boom 5.05 m and industrial stick 2.8 m.
m
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M312 One-piece-boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
6.00 m
All stabilizers down
*2.5
*2.5
2.3
*2.5
4.50 m
All stabilizers up
All stabilizers down
*3.3
*3.3
2.2
*3.3
3.00 m
All stabilizers up
All stabilizers down
*7.2
*7.2
5.7
*7.2
*5.0
*5.0
3.2
*5.0
3.4
*4.1
2.1
*4.1
*2.2
*2.2
1.6
*2.2
*2.0
*2.2
1.5
*2.2
7.56
1.50 m
All stabilizers up
All stabilizers down
*4.9
*4.9
*4.9
*4.9
4.9
*6.1
3.0
*6.1
3.3
*4.6
2.1
4.1
2.4
*2.7
1.5
*2.7
*2.2
*2.2
1.5
*2.2
7.66
4.8
*6.8
2.9
6.1
3.2
*5.0
2.0
4.0
2.4
*2.5
1.5
*2.5
7.45
3.1
*5.0
1.9
3.9
2.6
*3.0
1.6
*3.0
6.90
3.2
*4.3
2.0
4.0
5.91
All stabilizers up
0.00 m
All stabilizers down
All stabilizers up
-1.50 m
All stabilizers down
*7.1
*7.1
4.9
*7.1
4.7
*6.8
2.8
6.0
All stabilizers up
-3.00 m
All stabilizers down
*8.8
*8.8
5.0
*8.8
4.7
*6.1
2.8
6.0
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
M312, M315 and M318 Industrial Arrangement specifications
15
Working Ranges M315 VA boom
With VA boom 5.25 m and industrial stick 3.0 m.
m
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M315 VA boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
6.00 m
All stabilizers down
4.50 m
All stabilizers up
All stabilizers down
3.00 m
All stabilizers up
All stabilizers down
*9.0
*9.0
1.50 m
All stabilizers up
All stabilizers down
*3.2
*3.2
2.8
*3.2
*3.6
*3.6
*3.6
*3.6
*3.6
*3.6
2.8
*3.6
*2.8
*2.8
2.0
*2.8
7.0
*9.0
*5.9
*5.9
4.1
*5.9
4.1
*4.8
2.8
*4.8
3.0
*3.6
2.0
*3.6
*2.1
*2.1
1.6
*2.1
8.29
*8.7
*8.7
6.9
*8.7
6.0
*7.3
4.0
*7.3
*4.1
*5.4
2.8
5.0
2.9
*4.3
1.9
3.6
*2.2
*2.2
1.6
*2.2
8.38
All stabilizers up
0.00 m
All stabilizers down
*10.1
*10.1
6.8
*10.1
6.0
*8.1
4.0
7.5
4.0
*5.9
2.7
5.0
2.8
*4.7
1.8
3.6
*2.4
*2.4
1.6
*2.4
8.18
All stabilizers up
-1.50 m
All stabilizers down
11.5
*12.2
6.6
*12.2
6.1
*8.2
3.8
7.6
3.9
*6.0
2.5
4.9
2.8
*3.7
1.7
3.5
2.7
*2.8
1.7
*2.8
7.68
All stabilizers up
-3.00 m
All stabilizers down
11.7
*13.2
6.5
*13.2
5.9
*8.4
3.6
7.6
3.8
*5.8
2.4
4.8
3.2
*3.6
2.0
*3.6
6.80
All stabilizers up
All stabilizers down
11.4
*12.0
6.3
*12.0
5.7
*6.7
3.5
*6.7
-4.50 m
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
16
M312, M315 and M318 Industrial Arrangement specifications
Working Ranges M315 One-piece-boom
With One-piece-boom 5.05 m and industrial stick 3.0 m.
m
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M315 One-piece-boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
6.00 m
All stabilizers down
*3.1
*3.1
2.8
*3.1
4.50 m
All stabilizers up
All stabilizers down
*3.6
*3.6
2.7
*3.6
*2.4
*2.4
1.9
*2.4
3.00 m
All stabilizers up
All stabilizers down
1.50 m
All stabilizers up
All stabilizers down
*8.7
*8.7
6.9
*8.7
*6.0
*6.0
3.9
*6.0
4.0
*4.7
2.6
*4.7
2.9
*3.2
1.9
*3.2
*2.2
*2.2
1.7
*2.2
8.01
5.8
*7.4
3.6
*7.4
3.9
*5.5
2.5
4.9
2.9
*3.9
1.9
3.6
*2.3
*2.3
1.7
*2.3
8.10
2.8
*4.0
1.8
3.5
*2.6
*2.6
1.7
*2.6
7.90
All stabilizers up
0.00 m
All stabilizers down
*4.9
*4.9
*4.9
*4.9
5.7
*8.2
3.5
7.4
3.8
*6.0
2.4
4.8
All stabilizers up
-1.50 m
All stabilizers down
*7.2
*7.2
5.9
*7.2
5.6
*8.3
3.4
7.3
3.7
*6.1
2.4
4.8
2.8
*3.1
1.8
*3.1
7.37
All stabilizers up
-3.00 m
All stabilizers down
11.0
*11.0
6.0
*11.0
5.6
*7.6
3.4
7.3
3.7
*5.5
2.4
4.8
3.4
*4.2
2.2
*4.2
6.45
All stabilizers up
All stabilizers down
*7.9
*7.9
6.2
*7.9
*5.4
*5.4
3.5
*5.4
-4.50 m
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
M312, M315 and M318 Industrial Arrangement specifications
17
Working Ranges M318 VA boom
With VA boom 5.25 m and industrial stick 3.2 m
m
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M318 VA boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
6.00 m
All stabilizers down
4.50 m
All stabilizers up
All stabilizers down
3.00 m
All stabilizers up
All stabilizers down
*9.1
*9.1
1.50 m
All stabilizers up
All stabilizers down
*3.9
*3.9
3.4
*3.9
*4.4
*4.4
3.4
*4.4
3.7
*4.1
2.4
*4.1
8.3
*9.1
*6.2
*6.2
*4.8
*6.2
5.1
*5.1
3.3
*5.1
3.8
*4.7
2.4
4.3
*2.6
*2.6
1.9
*2.6
8.46
*10.6
*10.6
8.1
*10.6
*7.5
*8.0
4.7
*8.0
*5.0
*6.0
3.3
5.8
3.7
*5.1
2.3
4.3
*2.8
*2.8
1.8
*2.8
8.54
All stabilizers up
0.00 m
All stabilizers down
*12.2
*12.2
*8.1
*12.2
7.5
*9.2
4.7
8.6
5.0
*6.7
3.2
5.8
3.6
*5.5
2.2
4.2
3.0
*3.1
1.8
*3.1
8.34
All stabilizers up
-1.50 m
All stabilizers down
*14.4
*14.4
7.9
*14.4
*7.6
*9.7
4.5
8.8
4.9
*7.1
3.0
5.8
3.5
*5.6
2.1
4.1
3.2
*3.6
1.9
*3.6
7.85
All stabilizers up
-3.00 m
All stabilizers down
14.9
*15.5
7.7
*15.5
7.5
*9.8
4.3
8.9
4.7
*7.2
2.8
5.6
3.8
*4.6
2.2
4.5
6.99
All stabilizers up
All stabilizers down
14.9
*15.3
7.5
*15.3
7.2
*9.0
4.1
8.7
-4.50 m
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
18
M312, M315 and M318 Industrial Arrangement specifications
Working Ranges M318 One-piece-boom
With One-piece-boom 5.3 m and industrial stick 3.2 m.
m
8
7
;
6
5
4
3
2
1
0
1
2
3
4
5
6
7
10
9
8
7
6
5
4
3
2
1
0
1
2
m
Lift capacities M318 One-piece-boom
With 400 kg additional counterweight and “heavy lift” arrangement. All weights are in metric tons.
4.5 m
3.0 m
6.0 m
7.5 m
9.0 m
Undercarriage
**Height configuration
m
All stabilizers up
4.50 m
All stabilizers down
*4.7
*4.7
3.3
*4.7
3.7
*4.2
2.3
*4.2
All stabilizers up
All stabilizers down
*10.2
*10.2
8.1
*10.2
*6.7
*6.7
4.6
*6.7
5.0
*5.5
3.1
*5.5
3.6
*4.9
2.3
4.2
*2.9
*2.9
1.9
*2.9
8.47
All stabilizers up
1.50 m
All stabilizers down
*5.6
*5.6
*5.6
*5.6
7.3
*8.5
4.2
*8.5
4.8
*6.3
2.9
5.7
3.5
*5.3
2.2
4.1
2.9
*3.0
1.8
*3.0
8.55
All stabilizers up
All stabilizers down
7.1
*9.5
4.0
8.5
4.7
*6.9
2.8
5.5
3.5
*5.6
2.1
4.1
3.0
*3.4
1.8
*3.4
8.35
All stabilizers up
-1.50 m
All stabilizers down
6.9
*9.8
3.9
8.4
4.6
*7.2
2.7
5.5
3.4
*5.6
2.1
4.0
3.2
*4.0
2.0
3.8
7.86
4.6
*6.8
2.7
5.4
3.8
*5.3
2.3
4.4
7.00
3.00 m
0.00 m
All stabilizers up
-3.00 m
All stabilizers down
*13.0
*13.0
6.9
*13.0
6.9
*9.2
3.9
8.4
All stabilizers up
-4.50 m
All stabilizers down
*10.8
*10.8
7.1
*10.8
7.1
*7.5
4.0
*7.5
Load Radius
Over Front
Load Radius
Over Side
Load at
Maximum Reach
* Limited by hydraulic rather than tipping load
** Height of stick pin
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting
capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lift capacities
M312, M315 and M318 Industrial Arrangement specifications
19
M318 MH and M320 MH Material Handler
M312, M315 and M318 Industrial Arrangement
HEHH2328 (0398) hr
Featured photos of machines may not always include standard equipment.
See your Caterpillar dealer for available options.
Materials and specifications are subject to change without notice.
© 1998 Caterpillar
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising