new brunswick scientific`s c 76 water bath shaker

new brunswick scientific`s c 76 water bath shaker
NEW BRUNSWICK SCIENTIFIC'S
C76 WATER BATH SHAKER
This multi-functional shaking water bath
can maintain temperatures up to 80°C,
making it ideally suited for hybridization
studies, gel staining - destaining, as well as
for culturing cells. An optional cooling coil
extends its range of applications.
■ Microprocessors Ensure Precise Control of temperature,
agitation speed and running time
■ Temperature Range: 7°C above ambient to 80°C.
Optional cooling coil available for near and below
ambient conditions
■ Agitation 50 - 300 rpm, + 2 rpm
■ 1/2” (1.3 cm) Circular Orbit
■ Unique Acceleration/Deceleration Circuit prevents
splashing and reduces mechanical wear for long life
■ Timed Studies with Automatic Agitation Shut-Off
can be programmed, adjustable from 0.1 to 99.9 hrs.
■ Round-Cornered Bath of One Piece Heavy-Gauge
Stainless Steel is crevice-free, easy-to clean, and rustresistant
Large-capacity Model C76 Water Bath Shaker with optional Plexiglas
gable cover accepts test tubes and flasks to 2 Liters.
■ Heat Loss and Evaporation Minimized with use of optional
Plexiglas or stainless-steel gable cover.
■ Audible & Visual Alarms alert the user to setpoint deviations
■ Thermostat Fail-Safe shuts off heaters in case of over-temp.
■ Interchangeable Accessory Platforms, 12" x 16.5" (31 x
42 cm) accommodate flasks, tubes and gel trays
■ Half-Size Platforms with Clamps already mounted, provide maximum capacity for shaking different sized flasks
■ C-76 Shakers Shipped Within the US and Canada are
Covered by 2 Year Warranty on parts & labor. Outside of
North America, they are covered by a 1 year warranty
Deep-drawn round-cornered bath has no seams or crevices to
simplify cleaning. Front and rear snap-in baffles, which minimize
splashing, have been removed to show details.
New Brunswick Scientific
Where Quality and Innovation Have Become Tradition
US Patent No. 5,593,228
MODEL C76 WATER BATH SHAKER SPECIFICATIONS *
SHAKING
Half-size platforms offer shaking
versatility.
Range &
Control †
50 to 300 rpm ±2 rpm over entire speed range by means of Pl Microprocessor
control. Acceleration circuit prevents sudden starts and minimizes splashing
Motion
1/2” (1.3 cm) diameter circular orbit
Indication
Digital LED display in 1 rpm increments
Timer
Programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of
period. Can be deactivated for continuous operation
Range
7°C above ambient ( or coolant temperatures using optional cooling coil), to 80°C **
Pl microprocessor feedback control with platinum RTD sensor, employing
pulse-width modulation of heater
Regulation
TEMPERATURE
Optional stainless steel gable cover
for high temperature applications.
See-through gable cover option for
rapid heat-up to 60°C.
Control
±0.25°C
Indication
Digital LED Display in 0.1°C increments
Heaters
Low-watt density resistance-type heaters
ALARMS
Visible warning signal indicates when speed deviates more than 5
rpm, temperature more than 1°C from setpoints, and when timer has expired
LED DISPLAY
Indicates speed, running time, alarm conditions and temperature. Displays readout
of internal clock. Character height 3/8” (0.95 cm)
DRIVE
Eccentric counterbalanced drive with permanently lubricated ball bearings
DRIVE MOTOR
Variable speed AC motor
SAFETY
Sensor shuts off heaters if high temperature limit is exceeded
SETPOINT RETENTION
Setpoints and operating status retained by non-volatile memory. Automatic restart
after power is restored. (Indicated by flashing display)
ELECTRIC SERVICE
100/120V, and 230/240V, 50/60 Hz. 960 Watts
DIMENSIONS
Platform
12” Wide x 16.5” Deep (31 x 42 cm). Half Size Platforms sized 12” x 8” (30 x 20 cm)
Overall
21.4” Wide x 26.9” Deep x 18.5” High (54 x 68 x 47 cm)
WEIGHT
115 lbs (52 kg) Net;
AMBIENT OPERATING
CONDITIONS
145 lbs (66 kg) Gross
Temperature 5°C - 35°C. Humidity: 20% - 90% RH, non-condensing
(*) Specifications subject to change without notice
(**) Stainless Steel Gable Cover required for temperatures over 60°C
Optional Cooling Coil for low
temperature applications.
MODEL C76 ORDERING INFORMATION
Catalog No.
Orbit
Electrical Service
M1248-0002
1/2” (1.3 cm)
100/120V 50/60 Hz
M1248-0003
1/2” (1.3 cm)
230/240V 50/60 Hz
ACCESSORY PLATFORMS, 12” x 16.5” FOR MODEL C76
Catalog No.
No. of
Clamps/Holders
HALF-SIZE PLATFORMS**, 12” x 8”
Catalog No.
Description
Platforms/Bath
Clamps/Plat.
AG7-50
50 mL Erlenmeyer clamps
2
13
AG7-125
125 mL Erlenmeyer clamps
2
8
AG7-250
250 mL Erlenmeyer clamps
2
5
(**) Requires one sub-platform M1231-9939
TEST TUBE RACKS** ◊
Application/Size of Glassware
Catalog No.
M1231-9930
—
Universal Platform**
M1231-9933
31
50 mL Erlenmeyer Flask
M1231-9934
22
125 mL Erlenmeyer Flask
M1231-9935
13
250 mL Erlenmeyer Flask
M1231-9936
8
500 mL Erlenmeyer Flask
M1231-9937
6
1 L Erlenmeyer Flask
M1231-9938
2
M1231-9939
—
2 L Erlenmeyer Flask
Sub-Platform used as a
mounting base for 2 half-size
platforms or for 4 test tube racks.
See chart at right
(**) Flask clamps for Universal Platform sold separately.
(†) Based on shaking a typical workload
Description
Platforms/Bath
Clamps/Plat.
AG7-TT13
Rack for 13 mm Tubes
4
60
Rack for 16 mm Tubes
4
36
AG7-TT16
Rack for 20 mm Tubes
4
29
AG7-TT20
AG7-TT25
Rack for 25 mm Tubes
4
18
(**) Requires one sub-platform M1231-9939 (◊) Other rack options available.
Contact your local sales representative for details.
OTHER ACCESSORIES
Catalog No.
Description
M1231-2000
Gable Cover, Stainless steel, for temperatures > 60°C
M1231-2010
Gable Cover, Plexiglas, for temperatures ≤ 60°C
M1231-9920
Cooling Coil, Factory installed
M1248-0730
Spare set of Arms for affixing platform to water bath
New Brunswick Scientific Co., Inc.
P.O. Box 4005 • 44 Talmadge Road • Edison, NJ, USA, 08818-4005
800-631-5417 • 732-287-1200 • Fax: 732-287-4222
E-Mail: bioinfo@nbsc.com • www.nbsc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising