247000 Series Digital Low Resistance Ohmmeters

247000 Series Digital Low Resistance Ohmmeters
247000 Series
Digital Low Resistance Ohmmeters
247000 Series
Digital Low Resistance Ohmmeters
DESCRIPTION
Digital Low Resistance Ohmmeters (DLRO®) are a family of
highly accurate instruments that provide a simple, practical
and reliable means of making low-resistance tests in the
field. They also are ideal for production quality control.
They operate on the four-wire measurement principle,
thus eliminating lead and contact resistances. With basic
accuracies of ±0.25% and resolution down to 0.1 µΩ, they
are nonetheless designed to be rugged and portable for
use at the job site. A variety of optional test leads and
calibration resistance standards are offered for use with
DLROs.
APPLICATIONS
Operation is simple: just connect the leads, turn the
instrument on and read the measurement directly from
the digital LED display. No warm-up is required.
Typical applications include measuring the resistance of:
n Switch
and circuit breaker contacts
n Transformers
n Motor
and generators
windings
n Busbar
and other joints
n Aircraft,
rail and pipe bonds
n Cable
splices, welds and fuses
n Metal
alloys
n Graphite
n Wire
electrodes and other composites
and cable
n
Resolution to 0.1 µΩ on 599.9 µΩ range
n
Standard accuracy of ±0.25%
n
Digital readout
General-Purpose DLROs
Two models specially designed for general-purpose testing
applications are available.
Each provides up to 10 amperes of test current for
measuring resistances to 60 ohms with 1 µΩ resolution and
±0.25% accuracy.
Dual-Pak General-Purpose Model, Cat No. 247000
This battery-powered unit features separate measuring and
charger modules for maximum portability. The charger can
be left in the shop, and the measuring module taken to the
job site.
It weighs less than 8 pounds (3.6 kg) and provides hours
of testing.
Single-Pak General-Purpose Model, Cat. No. 247001
This compact instrument packages measuring circuits,
rechargeable batteries and charger in one self-contained
unit.
Ruggedly built to handle the most demanding field
applications, the Single-Pak is housed in a tough Noryl®
case with hinged, removable lid and carrying handle.
This model also includes captive wing nuts.
Single-Pak/Low-Range Model
Cat. No. 247002
This model provides an extra range, 0 to 599.9 µΩ, for
applications requiring 0.1 µΩ resolution. It also features a
current-reversing switch to average out any voltage offset
in the test sample. Captive wing nuts are also standard.
247000 Series
Digital Low Resistance Ohmmeters
The Low-Range DLRO, Cat.
No. 247002, features an extra
range and rugged, Single-Pak
design.
FEATURES AND BENEFITS
n Resolution as fine as 0.1 µΩ
n Standard
accuracy of ±0.25%
n Kelvin-type,
four-wire measurement eliminates errors
caused by lead and contact resistances.
n Digital
readout with automatic zero circuit eliminates
field test inaccuracies.
Low-Range/High-Current Models
n Broad
line of test leads is available to simplify and
enhance data collection.
Cat. No. 247100 and 247101
These instruments are used when a continuous test
current of 100 amperes is required. These models include
a separate 100 ampere current supply module with a
modified standard battery-powered 10 ampere system.
These combinations provide a sixth range, 0 to 599.9 µΩ,
with the 100 ampere current.
For 100 ampere measurements, an interconnecting cable
from the 100 ampere current supply module is plugged
into a special receptacle on the measuring module.
When the 100 ampere range is not used, a jumper plug is
inserted in place of the interconnecting cable.
This feature allows the measuring module to be used
as a standard battery-powered, 10 A instrument.
Low-Range/High-Current Model Cat. No. 247101 consists of a
Single-Pak DLRO, Cat. No. 247001-3, and separate 100 ampere
test current supply, Cat. No. 247120. The 100 ampere supply
also may be ordered as an option.
Cat. No. 247100 meets ANSI C37.09, Test Procedure for
AC High Voltage Circuit Breakers.
SPECIFICATIONS
Cat. No.
247000
247001
247002
247100
247120
247101
Model
Resistance
Range
Resolution
Dual-Pak
0-5.999mΩ
0-59.99mΩ
0-599.9mΩ
0-5.999Ω
0-59.99Ω
1μΩ
10μΩ
0.1mΩ
1mΩ
10mΩ
10A
1A
100mA
10mA
1mA
0-5999μΩ
0-59.99mΩ
0-599.9mΩ
0-5.999Ω
0-59.99Ω
1μΩ
10μΩ
0.1mΩ
1mΩ
10mΩ
10A
1A
100mA
10mA
1mA
Single-Pak
Low Range
0-599.9μΩ
0-5.999mΩ
0-59.99mΩ
0-599.9mΩ
0-5.999Ω
0-59.99Ω
0.1μΩ
1μΩ
10μΩ
0.1μΩ
1mΩ
10mΩ
Low Range
Power Pak
0-599.9mΩ
Higher
Ranges
Measuring
Modules
247000-3
or
247001-3
0-5.999mΩ∗
0-59.99mΩ
0-599.9mΩ
0-5.999Ω
0-59.99Ω
or
0-5999μΩ∗
Single-Pak
Current
Accuracy
Power
Source
Dimensions
Weight
(0.25%rdgd
+ 1 lsd)
Rechargeable
batteries with
separate
charger
8Hx9Wx8D in.
20 x 23 x 20 cm
12.25lb
(5.6kg)
(0.25%rdgd
+ 1 lsd)
Rechargeable
batteries with
internal
charger
12Hx6Wx10D in.
30 x 16 x 25 cm
12lb
(5.5kg)
10A
10A
1A
100mA
10mA
1mA
(0.3%rdgd
+ 1 lsd)
Rechargeable
batteries with
internal
charger
12Hx6Wx10D in.
30 x 16 x 25 cm
12lb
(5.5kg)
0.1μΩ
100A
(0.5%rdgd
+ 2 lsd)
Line Operated
Supply
13Hx8Wx10D in.
33x20x25 cm
20 lb
(9.3kg)
1μΩ
10μΩ
0.1mΩ
1mΩ
10mΩ
10A
1A
100mA
10mA
1mA
(0.25%rdgd
+ 1 lsd)
Rechargeable
batteries with
separate
charger or
internal
charger
Dual -Pak units
8Hx9Wx8D in.
20 x 23 x 20 cm
12lb
(5.5kg)
247100 consists of 247000-3 Dual-Pak & 247120 100 ampere Power Supply
247101 consists of 247001-3 Single-Pak & 247120 100 ampere Power Supply
*Alternate range ID for lower range.
Single-Pak
12Hx6Wx10D in.
30 x 16 x 25 cm
247000 Series
Digital Low Resistance Ohmmeters
Test Leads
Megger DLROs require test leads, two potential and two current, to make low-resistance measurements. In addition to individual current and potential lead sets, duplex leads that combine current and
potential connections in one set are offered. A variety of C-clamps, Kelvin clips, fixed-point and helical spring-point leads are available in various lengths.
Individual Test Leads
Type
Potential
Maximum
Test Current
Termination
N/A
Hand Spikes
10 A
Terminal Clips
Current
Heavy-Duty
Clamps
100 A***
Length
CAT. NO.
7 ft (2 m)
242021-7
18 ft (5.5 m)
30 ft (9 m)
242021-18
242021-30
7 ft (1.5 m)
242041-7
18 ft (5.5 m)
242041-18
30 ft (9 m)
242041-30
16 ft (5 m)
242144-16
26 ft (8 m)
242144-26
Duplex Test Leads
Maximum
Test Current
Length
Helical Hand
Spikes with
Spring Points
10 A
7 ft (2 m)
18 ft (5.5 m)
30 ft (9 m)
242011-7
242011-18
Helical Hand
Spikes with
Spring Points
and Current
Pushbutton Switch
10 A
18 ft (5.5 m)
242009-18
Heavy-Duty
Fixed-Point
Hand Spikes
7 ft (2 m)
242002-7
10 A
18 ft (5.5 m)
242002-18
30 ft (9 m)
242002-30
Replaceable
Needle Points
10 A
7 ft (2 m)
242003-7
2 in. (5 cm)
Heavy-Duty
C-Clamps
7 ft (2 m)
242004-7
10 A
18 ft (5.5 m)
242004-18
30 ft (9 m)
242004-30
4 in. (10 cm)
Heavy-Duty
C-Clamps
100 A***
16 ft (5 m)
242104-2-16
26 ft (8 m)
242104-2-26
7 ft (2 m)
7 ft (2 m)
241005-7*
242005-7**
7 ft (2 m)
242006-7
18 ft (5.5 m)
242006-18
30 ft (9 m)
242006-30
Termination
0.5 in. (1.3 cm)
Kelvin Clips
1.5 in. (4 cm)
Kelvin Clips
* Gold-plated
** Silver-plated
*** With Cat. No. 247120 only
10 A
10 A
CAT. NO.
Duplex Test Lead Styles
Kelvin Clips — Feature spade
lugs on outboard end and
alligator clips with insulated,
silver- or gold-plated jaws
Cat. No. 241005-7, 242005-7,
242006-7, 242006-18, 242006-30
Helical Spring Points — Tips rotate and compress
into the body of the probe to
ensure accurate measurement.
Cat. No. 242011-7, 242011-18,
242011-30, 242009-18
242011-30
Heavy-Duty Fixed Points —
Economical, lightweight and
built for durability
Cat. No. 242002-7, 242002-18,
242002-30
Heavy-Duty C-Clamps — Current passes through the
C-clamp and screw thread;
the potential passes through a
four-point anvil insulated from
the clamp metal. This set of
leads is available in two widths
and a variety of lengths.
Cat. No. 242004-7, 24200418, 242004-30, 242104-2-16,
242104-2-26
247000 Series
Digital Low Resistance Ohmmeters
OPTIONAL ACCESSORIES
Input Voltage Protection
To protect the instrument when testing battery straps, this
option provides input protection against accidental overvoltage up to 30 volts.
The option should not be specified when the instrument will be used to test transformers and other inductive
components. This option is available on Cat. No. 247000,
247001 and 247002 only. To order, add –11 to instrument
Cat. No.
Circuit Breakers Cat. No. 247101, are two such standards.
Cat. No. 247100 comes standard with this option. This option is not available with Cat. No. 247002. To order, add –3
to instrument Cat. No.
Calibration Shunts
These four-terminal calibrating resistance standards feature
a conservative current rating to ensure against overheating.
Each shunt provides two current terminals with knurled
Allen-head cap screws and two potential terminals with
slotted screw heads. Accuracy is ±0.25%.
100-Ampere Adapter Plug
Cat. No. 247000 and 247001 can be ordered with an
adapter plug to allow use with the 100 ampere current supply, Cat. No. 247120.
This capability is required by some standard methods of
testing large switchgear. ANSI C37.09, Test Procedure for
AC High Voltage Circuit Breakers, and IEC Recommendation, Publication 56-4, High Voltage Alternating Current
ORDERING INFORMATION
Item (Qty)
Cat. No.
DLRO® Digital Low Resistance Ohmmeters
Dual-Pak, battery-operated (10A)
247000
Single-Pak, battery-operated (10A)
247001
Single-Pak/Low-Range, battery-operated (10A)
247002
Low-Range/High-Current, line- and
battery-operated (100A)
247100 or 247101
Item (Qty)
Cat. No.
100 A adapter plug
for Cat. No. 247000 and 247001 only
Add –11
230 V (nominal), 50/60-Hz operation
Add –47
Canvas carrying case for Cat. No. 247000
Instrument carrying case
for Cat. No. 247001, 247002 Included Accessories
Line cord, where applicable 17032
Instruction manual
AVTM24-1J
Optional Accessories
Test leads
See chart
100 ampere current supply
for Cat. No. 247000-3 and 247001-3 247120
Add –3
Input voltage protection
for Cat. No. 247000, 247001 and 247002 only
35788
218748
Carrying case for leads
18313
Field test shunt, 10 Ω, current rating 0.001 A 249000*
Field test shunt, 1 Ω, current rating 0.01 A 249001*
Field test shunt, 0.1 Ω, current rating 1 A 249002*
Field test shunt, 0.01 Ω, current rating 10 A 249003
Field test shunt, 0.001 Ω, current rating 100 A 249004
Field test shunt, 0.0001 Ω, current rating 500 A Certificate of Calibration, NIST 249005
CERT-NIST
*Furnished with protective shield
UK
Archcliffe Road, Dover
CT17 9EN England
T (0) 1 304 502101
F (0) 1 304 207342
UNITED STATES
4271 Bronze Way
Dallas, TX 75237-1019 USA
T 1 800 723 2861
T 1 214 333 3201
F 1 214 331 7399
OTHER TECHNICAL SALES OFFICES
Valley Forge USA, College Station
USA, Sydney AUSTRALIA, Täby
SWEDEN, Ontario CANADA, Trappes
FRANCE, Oberursel GERMANY, Aargau
SWITZERLAND, Kingdom of BAHRAIN,
Mumbai INDIA, Johannesburg SOUTH
AFRICA, and Chonburi THAILAND
ISO STATEMENT
Registered to ISO 9001:2000 Reg no. Q 09250
Registered to ISO 14001 Reg no. EMS 61597
DLRO247000_DS_en_V15
www.megger.com
Megger is a registered trademark
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising