SOLDERING TOOLS AND ACCESSORIES

SOLDERING TOOLS AND ACCESSORIES
SOLDERING TOOLS AND ACCESSORIES
Weller® Table of Contents
Contents
Soldering Stations & Accessories
Page No.
175
Soldering Guns & Accessories
176-178
Soldering Irons & Accessories, SI Series
179-182
Soldering Irons & Accessories, Series Mini 2000
183
Supports for Soldering Irons & PCB Holder
184-185
Solder Accessories
186-191
Other Accessories
Cordless Soldering Irons & Accessories
192
193-198
Hobbykits for Pokerwork
and Stained Glass & Accessories
199-200
Soldering Irons for Stained Glass & Accessories
201-202
Soldering Stations for Stained Glass & Accessories
203
Weller Numerical Index
234
®
174
SOLDERING STATIONS
&
ACCESSORIES
Temperature Controlled Soldering Stations
• The temperature range can be controlled between 200°C
and 450°C. The WHS40 soldering station from Weller rules
out the risk of temperature shocks which can occur with
conventional soldering bits
• Desired temperatures can be set precisely in such a
way that you no longer have to worry about overheating
sensitive areas
• Consist of power unit, soldering iron with nickel-plated
tip 2,0 mm and support
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056806699
40
230
50
1460
1
0056806399
40
230
50
1488
1
Type
Code No.
WHS40
WHS40 (GB)
Temperature Controlled Digital Soldering Stations
• The new electronically controlled soldering station WHS40D
operates with a temperature range of 150°C - 450°C
• The precise soldering tip temperature shows on the digital
read-out (pre-set and real value)
• This soldering station is suitable for delicate soldering tasks
on temperature sensitive components
• LED to monitor the heater is integrated in the display
• The temperature adjusts via buttons
• Consist of power unit, soldering iron with longlife
tip 2,0 mm and support
• Available June 2003
Type
Code No.
Watts
Volts
Hz
Weight
g
Shelf
Pack
WHS40D
0056828699
40
230
50
1460
1
WHS40D (GB)
0056828399
40
230
50
1490
1
Straight Tips for Soldering Stations WHS40 and WHS40D
Type
Code No.
Packed
Nickel
plated
Diameter
mm
Width
mm
Shelf
Pack
43113
0054311399
Polybag
S3
0054003499
Carded
x
3,5
2,0
1
x
3,5
3,5
6
S31
0054321099
Carded
S32
0054321199
Carded
x
3,5
0,4
6
x
3,5
2,0
6
Longlife
(S3 = 3 tips on card)
Spare Parts for Soldering Stations WHS40 and WHS40D
Type
WH40
Code No.
Description
Weight
g
Shelf
Pack
0056810699
Soldering Iron with tip 43113
116
1
0058743708
Sponge (2 pcs.)
5
1
0058743709
Spring with funnel
35
1
175
SOLDERING GUNS
&
ACCESSORIES
Expert Soldering Guns
• Red housing with built-in illumination of the solder-joint
and cooper soldering tip
• All purpose gun, that tackles soldering, cutting, sealing and
pokerwork with instant heat trough interchangeable tips
• Operated by fingertip trigger this gun is ready to solder
in 7 seconds
• 8100 UCK/UDK/UCPK contain 8100 Expert soldering gun,
coil of multi-purpose solder, cutting tip, smoothing tip and a
soldering aid tool
• UC & UD: Packaging with inspection window
without accessories
• UCK: Packaging with inspection window with accessories
• UCPK & UDK: In plastic case with accessories
Watts
Volts
Hz
Weight
g
Shelf
Pack
0050200299
100
230
50
1300
6
8100UCK
0050201299
100
230
50
1330
6
8100UCPK
0050202299
100
230
50
1400
6
8100UD (GB)
0050107299
100
230
50
1300
6
8100UDK (GB)
0050107899
100
230
50
1400
6
Type
Code No.
8100UC
Standard Soldering Guns
• Black housing with copper soldering tip
• Universal soldering gun with instant heat fingertip trigger,
ready to solder in 7 seconds
• Ideal for hobbies, model making and home repairs
• 9200 UCPK/UDK contain 9200 standard soldering gun,
coil of multi-purpose solder, cutting tip, smoothing tip and
a soldering aid tool
• UC: Packaging with inspection window without accessories
• UCPK & UDK: In plastic case with accessories
176
Watts
Volts
Hz
Weight
g
Shelf
Pack
0050206399
100
230
50
1236
6
9200UCPK
0053813199
100
230
50
1390
6
9200UD (GB)
0050206499
100
230
50
1230
6
9200UDK (GB)
0050206999
100
230
50
1400
6
Type
Code No.
9200UC
SOLDERING GUNS
&
ACCESSORIES
Standard UC3 Soldering Gun
• Housing in ocean blue with copper soldering tip in triangular
packaging, not including accessories
Type
Code No.
9200UC3
0050208499
Watts
Volts
Hz
Weight
g
Shelf
Pack
100
230
50
1080
12
Robust Soldering Guns
• Yellow housing with built-in solder-joint illumination
• Professional heavy-duty gun with iron-plated
Longlife soldering tip
Watts
Volts
Hz
Weight
g
Shelf
Pack
0050500299
250
230
50
1830
6
0050500799
250
230
50
1855
6
Type
Code No.
05C
05D (GB)
177
SOLDERING GUNS
&
ACCESSORIES
Tips for Expert Soldering Gun 8100
7135
6110
Type
Code No.
Description
7135
0054000299
Copper soldering tip (2 on card)
Shelf Pack
6110
0054000199
Cutting tip
12
6120
0054000399
Smoothing tip
12
PL-1
0054001299
Sealing tip & Teflon tape (for sealing plastic)
12
01101
0054001499
Sealing tip (for plastic)
12
RCT
RCT
Rope cutting tip
12
12
Tips for Standard Soldering Gun 9200
6120
RCT
Type
Code No.
Description
7135
0054000299
Copper soldering tip (2 on card)
Shelf Pack
6110
0054000199
Cutting tip
12
6120
0054000399
Smoothing tip
12
PL-1
0054001299
Sealing tip & Teflon tape (for sealing plastic)
12
01101
0054001499
Sealing tip (for plastic)
12
RCT
RCT
Rope cutting tip
12
12
Tips for Robust Soldering Gun 05
6130
7250
178
Type
Code No.
Description
7250
0054000499
Copper soldering tip
Shelf Pack
12
6150
0054000599
Soldering tip (iron plated, Longlife)
12
6130
0054000899
Cutting tip
12
6140
0054001099
Smoothing tip
12
03102
0054001899
Sealing tip (for plastic)
12
SOLDERING IRONS
&
ACCESSORIES , SI SERIES
Soldering Irons, SI Series
Fine Duty Irons, 15 Watts
• For fine duty work such as in home electronics, light duty
electrical repairs and hobby work
• Fitted with straight tip, nickel-plated 3,5 mm (type 43115)
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056820299
15
230
50
260
6
0056820799
15
230
50
240
6
Type
Code No.
SI15
SI15 (GB)
GeneraI Duty Irons, 25 Watts
• All-purpose iron for general electrical repairs in the home
and hobby workshop
• Also available in kit form (SI25K) with straight spare tip,
25 g solder and soldering aid tool
• SI25-12 (12 Volts) with crocodile clips. Ideal for connecting
to a car battery for in-car or outside repairs
• SI25 and SI25-12 fitted with straight tip nickel plated 4,5 mm
(type 43003)
• SI25K fitted with bent tip, nickel plated 4,5 mm (type 43004)
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056821299
25
230
50
305
6
SI25 (GB)
0056821799
25
230
50
250
6
SI25K
0056822299
25
230
50
305
6
SI25K (GB)
0056822799
25
230
50
300
6
SI25-12 (GB)
0051800099
25
12
AC/DC
238
6
Type
Code No.
SI25
Medium Duty Irons, 40 Watts
• Medium duty iron for most general soldering repairs where
a little more power is required
• Also available in kit form (SI40K) with straight spare tip,
25 g solder and soldering aid tool
• SI40 and SI40K fitted with bent tip, nickel plated 6,3 mm
(type 43108)
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056823299
40
230
50
305
6
0056823799
40
230
50
350
6
0056824299
40
230
50
340
6
Type
Code No.
SI40
SI40 (GB)
SI40K
179
SOLDERING IRONS
&
ACCESSORIES , SI SERIES
Heavy Duty Irons, 75 Watts
• Heavy duty iron for making metal repairs,
such as battery connections and small metal joining tasks
• Fitted with bent tip, nickel plated 9,5 mm (type 43109)
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056825299
75
230
50
310
6
0056825799
75
230
50
355
6
Type
Code No.
SI75
SI75 (GB)
Heavy Duty Irons, 100 Watts
• Heavy duty iron for the hobby workshop where more
power is required
• Fitted with bent tip, nickel plated 12,5 mm (type 43110)
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056826299
100
230
50
430
6
0056826799
100
230
50
350
6
Type
Code No.
SI100
SI100 (GB)
Heavy Duty Irons 120, 175 and 200 Watts
• Heavy duty irons for the professional user and light
industrial operator
• For demanding jobs like sheet metal work
• SI120 fitted with bent tip, nickel plated 12,5 mm (type 43110)
• SI175 fitted with bent tip, nickel plated 16,0 mm (type 43111)
• SI251 fitted with bent tip, nickel plated 20,0 mm (type 43112)
SI 120
SI 175
SI 251
180
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056807699
120
230
50
930
6
SI120 (GB)
0051807799
120
230
50
870
6
SI175
0056808699
175
230
50
1030
6
SI175 (GB)
0051808799
175
230
50
970
6
SI251
0056809699
200
230
50
1190
6
Type
Code No.
SI120
SOLDERING TIPS , SI SERIES
Soldering Tips, Nickel Plated, Packed on Card
For
Soldering Iron
Type
Code No.
Description
Diameter
mm
Width
mm
Shelf
Pack
SI15
S3
0054003499
SI25
S1
0054003099
straight, 3 pcs.
3,5
3,5
6
straight, 3 pcs.
4,5
4,5
6
S2
0054003199
bent, 3 pcs.
4,5
4,5
6
SI40
S4
0054003299
bent, 3 pcs.
6,3
6,3
6
SI75
S8
0054003399
bent, 2 pcs.
9,5
9,5
6
SI100/SI120
S7
0054311099
bent, 1 pc.
12,5
12,5
6
Soldering Tips, Nickel Plated, Packed in Polybag
For
Soldering Iron
Type
Code No.
Description
Diameter
mm
Width
mm
Shelf
Pack
SI15
43113
0054311399
straight
3,5
2,0
1
43115
0054311599
straight
3,5
3,5
1
SI25
43003
0054300329
straight
4,5
4,5
1
43004
0054300499
bent
4,5
4,5
1
SI40
43105
0054310500
straight
6,3
6,3
1
43108
0054310899
bent
6,3
6,3
1
SI75
43106
0054310629
straight
9,5
9,5
1
43109
0054310929
bent
9,5
9,5
1
SI100/SI120
43107
0054310799
straight
12,5
12,5
1
43110
0054311000
bent
12,5
12,5
1
SI175
43111
0054311199
bent
16,0
16,0
1
SI251
43112
0054311299
bent
20,0
20,0
1
Soldering Tips, Iron Plated “Longlife”, Packed on Card
For
Soldering Iron
Type
Code No.
Description
SI15
S31
0054321099
straight
S32
0054321199
straight
3,5
2,0
6
SI25
S33
0054320099
straight
4,5
2,0
6
S34
0054320199
straight
4,5
3,0
6
S35
0054320299
straight
4,5
5,0
6
S36
0054322099
straight
6,3
5,0
6
S37
0054322299
bent
6,3
5,0
6
S38
0054323099
straight
9,5
7,0
6
S39
0054323299
bent
9,5
7,0
6
S41
0054324399
bent
12,5
12,5
6
SI40
SI75
SI100/SI120
Diameter
mm
Width
mm
Shelf
Pack
3,5
0,4
6
181
REPLACEMENT PARTS , SI SERIES
Replacement Parts for Soldering Irons
For
Soldering Iron
SI120
SI175
SI251
182
Type
Code No.
Description
Shelf
Pack
12202
0051220200
Supporting Screw for tip
1
87167
0058716779
Handle
1
10203
0051020300
Screw for handle
1
11631
0051163100
Nylon screw for handle
1
70009
0057000900
Terminal wire, 3-pole
1
11624
0051162400
Socket for cable
1
64256
0056425699
Replacement heating element
1
12202
0051220200
Supporting screw for tip
1
87167
0058716779
Handle
1
10203
0051020300
Screw for handle
1
11631
0051163100
Nylon screw for handle
1
70009
0057000900
Terminal wire, 3-pole
1
11624
0051162400
Socket for cable
1
64266
0056426699
Replacement heating element
1
12202
0051220200
Supporting screw for tip
1
87167
0058716779
Handle
1
10203
0051020300
Screw for handle
1
11631
0051163100
Nylon screw for handle
1
70009
0057000900
Terminal wire, 3-pole
1
11624
0051162400
Socket for cable
1
64276
0056427699
Replacement heating element
1
SOLDERING IRONS
&
ACCESSORIES , SERIES MINI 2000
Soldering Irons, Series Mini 2000
• Specifically designed for the electronic hobbyist
• Lightweight iron, perfectly balanced, with an ergonomically
designed handle
• Available in 12, 15 and 20 Watts plus a 12 Volt version with
15 Watts for connecting to a car battery
• Type WM12 fitted with nickel plated tip, width 2,4 mm
• Type WM12L fitted with iron plated Longlife tip, width 2,0 mm
• Type 2012 fitted with nickel plated tip, width 0,65 mm
• Type WM15L and WM15L12 fitted with iron plated Longlife tip, width 2,0 mm
• Type 2015 fitted with nickel plated tip, width 2,0 mm
• Type WM20 and 2020 fitted with nickel plated tip, width 3,5 mm
• WM20L fitted with iron plated Longlife tip, width 3,5 mm
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056811199
12
230
50
215
6
WM12L
0056812199
12
230
50
215
6
2012 (GB)
0056811299
12
230
50
195
6
WM15L
0056813199
15
230
50
215
6
WM15L12
0056810099
15
12
AC/DC
145
6
2015 (GB)
0056814299
15
230
50
198
6
WM20
0056815199
20
230
50
220
6
WM20L
0056816199
20
230
50
220
6
2020 (GB)
0056815299
20
230
50
200
6
Type
Code No.
WM12
Soldering Tips for Soldering Irons, Series Mini 2000
STT1
MTN1
MTN2
STT2
MTL1
MTL2
STT3
For
Soldering Iron
Type
Code No.
Width
mm
Nickel
Plated
WM12
MTN1
WM20
MTN2
Iron Plated
“Longlife”
Shelf
Pack
0054301099
0,65/2,4
x
6
0054301199
2,4/3,5
x
6
WM12L,WM15L
MTL1
0054301299
2,0
x
6
WM20L
MTL2
0054301399
3,5
x
6
2012 (GB)
STT1
0054329599
0,25
x
6
2015 (GB)
STT2
0054329699
2,0
x
6
2020 (GB)
STT3
0054329799
3,5
x
6
(Tips STT = 3 pcs./all tips are packed on card)
183
SUPPORTS FOR SOLDERING IRONS
&
PCB HOLDER
Support KH15
Type
Code No.
Description
KH15
0051502199
For soldering irons, series Mini 2000
Weight
g
Shelf
Pack
425
1
Weight
g
Shelf
Pack
20
1
Weight
g
Shelf
Pack
Support AH1
Type
Code No.
Description
AH1
0051239800
For soldering irons up to 75 watts,
Hobbykit 1 & 2 and Series Mini 2000
Support AH2/AH3
184
Type
Code No.
Description
AH2
0058718701
For soldering irons up to 100 watts
69
1
AH3
0058718700
For soldering irons up to 200 watts
75
1
SUPPORTS FOR SOLDERING IRONS
&
PCB HOLDER
Support KH30
Type
Code No.
Description
KH30
0051504099
For soldering irons up to 100 watts,
Weight
g
Shelf
Pack
620
1
Hobbykit 1 and 2
PCB Holder
• Maximum mounting surface of 160 x 235 mm
• PCB’s and components can be rotated through
360° at increments of 15°
• Work-piece is held in place by spring clamps
• Side pieces are adjustable along a continuum.
Hexagonal socket screws hold in place
• Built-in, non-slip rubber feet
• A firm work surface is assured by a well positioned
centre of gravity and built-in rubber feet
• Moveable arm with cushion grip holds components in place
• Offers many possibilities for attaching different shaped
components, connectors, soldering strips etc.
Type
Code No.
Description
ESF120
0051502599
Euro-Solder-Fix
Weight
g
Shelf
Pack
460
1
185
SOLDER ACCESSORIES
Solder BL50/50-100
Type
Code No.
Description
Packed
Shelf Pack
BL 50/50-100
0054002499
Solder 100 g, ø 1,5 mm
Carded
6
L-Sn 50 PbCu/zh
DIN 8516, F-SW 26
Solder RL 60/40-100
Type
Code No.
Description
Packed
Shelf Pack
RL 60/40-100
0054002599
Solder with a resin-core, 100 g, ø 1,5 mm
Carded
6
L-Sn 60 PbCu 2/zh
DIN 8516, F-SW 26
Solder BL 40/60-14
Type
Code No.
Description
Packed
Shelf Pack
BL 40/60-14
0054010799
Solder, 13,45 g, ø 1,5 mm
Carded
6
L-PbSn 40
EN 29545, F-SW 24
186
SOLDER ACCESSORIES
Solder RL 40/60-14
Type
Code No.
Description
Packed
Shelf Pack
RL 40/60-14
0054010899
Solder with resin-core, 13,45 g, ø 1,5 mm
Carded
6
L-PbSn 40
DIN 8516, F-SW 26
Soldering Grease LF 25
Type
Code No.
LF 25
0054002699
Description
Packed
Shelf Pack
Soldering grease, 20 g
Carded
6
DIN 8511, F-SW 21
Solder Solution LW 25
Type
Code No.
LW 25
0054002799
Description
Packed
Shelf Pack
Solder solution, approx. 25 ml.
Carded
6
DIN 8511, F-SW 12
187
SOLDER ACCESSORIES
Stone salmiak LS 25
Type
Code No.
Description
Packed
Shelf Pack
LS 25
0054002899
Stone salmiak, approx. 70 g
Carded
6
65 x 45 x 20 mm, Ammonium chloride
Solder BL 50/50-250
Type
Code No.
Description
Packed
Shelf Pack
BL 50/50-250
0054004399
Solder, 250 g, ø 1,5 mm
Carded
6
L-Sn 50 PbCu/zh
DIN 8516, F-SW 26
Solder RL 60/40-250
Type
Code No.
Description
Packed
Shelf Pack
RL 60/40-250
0054004299
Solder with resin-core , 250 g, ø 1,5 mm
Carded
6
L-Sn 60 PbCu 2/zh
DIN 8516, F-SW 26
188
SOLDER ACCESSORIES
Solder L 60/40-25
Type
Code No.
Description
Packed
Shelf Pack
L 60/40-25
0054002999
Solder with resin-core, 25 g, ø 1 mm on reel
Carded
6
L-Sn 60 PbCu 2/zh
DIN 8516, F-SW 26
Electronic Solder EL 60/40-100
Type
Code No.
Description
Packed
Shelf Pack
EL 60/40-100
0054004599
Electronic solder with resin-core, 100 g, ø 1 mm
Carded
6
L-Sn 60 PbCu 2/zh
DIN 8516, F-SW 26
Tiffany Solder TL 60/40-100
Type
Code No.
Description
Packed
Shelf Pack
TL 60/40-100
0054009099
Solder, 100 g, ø 3 mm, for Tiffany work
Carded
6
L-Sn 60 Pb (Sb)/zh
EN 29453
189
SOLDER ACCESSORIES
Soft Solder Tin-Plating Paste WVP 40
Type
Code No.
Description
Packed
Shelf Pack
WVP 40
0054009199
Soft solder tin-plating paste
Carded
6
40% Sn according EN 29453
60% MAT with solder portion
according DIN 8511, F-SW 12
Soft-Solder Assortment WLS 100
Type
Code No.
Description
Packed
Shelf Pack
WLS 100
0054009299
Soft-Solder assortment
Carded
6
Fitting solder, 100 g, ø 3 mm
EN 29453, L-SN Cu 2/zh,
Soldering grease, 35 g.
according DIN 8511, F-SW 21
DVGW with Chlorzinc
Soft-Solder Assortment WLS 120
Type
Code No.
Description
Packed
Shelf Pack
WLS 120
0054009399
Soft-Solder assortment
Carded
6
3 rods, 20 cm long, approx. 40 g each,
L-PbSn 30 (Sb) EN 29453,
1 Solder solution, 50 ml.
according "ZD” DIN 8511, F-SW 11
190
SOLDER ACCESSORIES
Solder Assortment WLS 20-65
Type
Code No.
Description
Packed
Shelf Pack
WLS 20-65
0054009499
Solder assortment
Carded
6
1 Solder Wire, 20 g, ø 1,5 mm
L-Sn 50 PbCu/zh, DIN 8516, F-SW 26
1 Stone 65 x 45 x 20 mm, Ammonium chloride
1 Solder solution DIN 8511, F-SW 12
1 Solder grease DIN 8511, F-SW 21
Solder Rods WLS 30
Type
Code No.
Description
Packed
Shelf Pack
WLS 30
0054010699
3 Solder rods, 20 cm long, approx. 40 g each
Carded
6
L-PbSn 30 (Sb), EN 29453
Fitting Solder FL 97/3
Type
Code No.
FL 97/3
0054010999
Description
Packed
Shelf Pack
Fitting solder No. 3, 100 g, ø 3 mm
Carded
6
L-Sn Cu 2/zh, EN 29453
191
OTHER ACCESSORIES
Other Accessories
DSP11
192
Type
Code No.
Description
Packed
Shelf Pack
EL1
0054006599
Desoldering wire, width 1,5 mm
Carded
6
EL2
0054006699
Desoldering wire, width 2,2 mm
Carded
6
DSP11
0054011099
Desoldering pump
Carded
6
WS1
0054007599
"Strippi” Wire Stripper
Carded
6
SW1
0054006799
Sponge for all KH supports
Carded
6
22419
0052241999
Sponge, 5 pcs., for all KH supports
Polybag
6
RBP600
0050615599
GASMIX Refill, 60/40 Butane/Propane
Bottled
6
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Cordless Soldering Irons, 15 Watts
• Heats up to approx. 370°C in 6 seconds
• Fingertip control with safety-lock switch
• Longlife nickel cadmium batteries fully charged overnight
• Interchangeable tips
• Built-in work light
• Slim, lightweight balanced design
• WC110C packed in coloured carton consisting of soldering
iron complete with tip WC 112 and battery charger
• WC100CPK packed in plastic case consisting of soldering
iron complete with tip WC112, battery charger, 25 g solder,
replacement tip WC111 and soldering aid tool
WC110C
WC100CPK
Watts
Volts
Hz
Weight
g
Shelf
Pack
0051604299
15
230
50
464
6
0051605299
15
230
50
728
6
Type
Code No.
WC110C
WC100CPK
Tips for Cordless Soldering Irons
• For Soldering Irons WC110C and WC100CPK
• Tips with built-in heating element
Width
mm
Shelf
Pack
chisel
2,5
6
chisel
1,5
6
pointed
0,8
6
Type
Code No.
Description
WC111
0051611199
WC112
0051611099
WC113
0051611299
Butane Gas Operated Soldering Iron WP2 Pyropen Jr.
• Mini iron soldering and brazing that goes everywhere
with temperature control
• Recharged in seconds
• This easy-to-handle butane gas operated soldering pen
requires no power cord or batteries and is electrically
completely neutral (no peaks)
• "Longlife” soldering tips deliver quick heat-up time
• Temperature control of soldering iron: 200-450°C
Hotblow feature: 430°C max., torch feature: 1300°C max.
All temperature are approximate
• Consist of WP2 Pyropen Jr., iron holder, cleaning sponge,
tapered needle "Longlife” tip 0,5 mm (71-01-01) and gas-refill
Type
Code No.
Description
Weight
g
Shelf
Pack
WP2
0051606599
Pyropen Jr.
245
6
193
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Soldering Tips for WP2 Pyropen Jr.
• "Longlife" soldering tips with catalyst
• All tips are packed on card
71-01-01
71-01-02
71-01-03
71-01-04
Width
mm
Shelf
Pack
Tapered needle
0,5
6
0051616699
Chisel point
3,0
6
0051616799
Spade point
3,0
6
0051616199
Chisel point
5,0
6
Type
Code No.
Description
71-01-01
0051616596
71-01-02
71-01-03
71-01-04
Hot Air Tips for WP2 Pyropen Jr.
• "Longlife" hot air tips with catalyst
• All tips are packed on card
71-01-50
Diameter
mm
Shelf
Pack
Hot air nozzle
1,5
6
Hot air nozzle
4,9
6
Type
Code No.
Description
71-01-50
0051616899
71-01-52
0051616999
Spare Parts for WP2 Pyropen Jr.
194
Type
Code No.
Description
Shelf
Pack
71-02
0051617099
Closing cap
6
71-04
0051617199
Burner nozzle
6
71-07
0051617299
Torch ejector
6
71-14
0051617399
Curled nut
6
71-15
0051617499
Burner seal
6
71-27
0051617599
Spring
6
71-28
0051617699
Igniter
6
70-37U
0051615499
Sponge holder with sponge
6
PP
0051615599
Tool support
6
RB-TS
0051616099
Gas refill, Iso Butan 75 ml
1
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Butane Gas Operated Soldering Iron WP1 with Piezo Ignition
• This soldering iron, operated using butane gas, has infinitely
variable temperature control
• Recharged in seconds
• Easy-to-handle, requires no power cord or batteries and is
electronically completely neutral (no peaks)
• "Longlife" soldering tips deliver quick heat-up time
• It can also be used as a hot air unit for shrinking plastic
• Consist of gas soldering iron WP1 complete with soldering
tip 91-01-01, hot air tip 91-01-52 and closure cap
Type
Code No.
Description
WP1
0051608599
Gas soldering iron with piezo ignition
Weight
g
Shelf
Pack
139
6
Soldering Tips, Hot Air Nozzless and Blow Torch for WP1
• All tips and nozzles with catalyst
• Packed on card
91-01-01
91-01-50
91-01-02
91-01-52
91-01-03
91-01-53
91-01-04
Width
mm
Shelf
Pack
Soldering tip needle shaped
1,0
6
Soldering tip chisel shaped
2,4
6
0051638799
Soldering tip round shaped bevelled
2,0
6
0051638899
Soldering tip chisel shaped
5,0
6
91-01-50
0051638999
Hot air nozzle, ø 1,5 mm
6
91-01-52
0051639099
Hot air nozzle, ø 4,7 mm
6
91-01-53
0051639299
Cutting knife
6
91-07U
0051639199
Blow torch
6
Type
Code No.
Description
91-01-01
0051638599
91-01-02
0051638699
91-01-03
91-01-04
195
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Butane Gas Operated Soldering Iron Weller/Portasol WC1
• Operated using butane gas
• Refillable and can be used anywhere
• Consist of gas soldering iron with tip C2 and
closure cap with built-in spark lighter
Type
Code No.
Description
WC1
0051608099
Gas soldering iron
Weight
g
Shelf
Pack
85
6
Width
mm
Shelf
Pack
6
Soldering Tips for WC1
• All tips with catalyst
• Packed on card
C2
C3
C4
196
Type
Code No.
Description
C2
0051630099
Soldering tip chisel shaped
3,0
C3
0051630199
Soldering tip fine
0,4
C4
0051630299
Cutting knife
6
6
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Butane Gas Operated Soldering Iron Kit Weller/Portasol P1K
• This gas soldering kit has four tools in one: soldering tip,
flame nozzle, hot air nozzle and hot cutting knife
• Operated using butane gas
• Refillable and can be used anywhere
• Approx. temperature soldering tips, hot air nozzle and
cutting knife: up to 450°C, flame nozzle: up to 1300°C
• Consist of gas soldering iron with tip T2, flame nozzle T5,
hot air nozzle T6, cutting knife T7, cleaning sponge and
safety rest in a sturdy storage box
Type
Code No.
Description
P1K
0051608499
Gas soldering iron kit
Weight
g
Shelf
Pack
355
6
Soldering Tips, Nozzles & Cutting Knife for P1K
• All tips and nozzles with catalyst
• Packed on card
T1
T5
T2
T6
T3
T7
T4
Type
Code No.
Description
Width
mm
Shelf
Pack
T1
0051630399
Soldering tip
1,0
6
T2
0051630499
Soldering tip
2,4
6
T3
0051630599
Soldering tip
3,2
6
T4
0051630699
Soldering tip
4,8
6
T5
0051630799
Flame nozzle
6
T6
0051630899
Hot air nozzle
6
T7
0051630999
Cutting knife
6
197
CORDLESS SOLDERING IRONS
&
ACCESSORIES
Butane Gas Operated Soldering Iron WP4 with Piezo Ignition
• This soldering iron, operated using butane gas
has infinitely variable temperature control
• Recharged in seconds. Gas container capacity 63 ml
• Easy-to-handle, requires no power cord or batteries
and is electrically completely neutral (no peaks)
• Approx. temperature soldering tip: 300-530°C,
hot air nozzles: 700°C, butane torch: 1300°C
• Consist of self-igniting gas soldering iron with tip 72-01-07,
hot air nozzle 72-01-52, shrinking attachment 72-01-55,
spanner and open wrench
Type
Code No.
Description
WP4 Piezo
0051607499
Gas soldering iron self-igniting
Weight
g
Shelf
Pack
400
1
Soldering Tips and Hot Air Nozzles for WP4 Piezo
• All tips and nozzles with catalyst
• Packed in poly bag
Round shaped
Chisel shaped
Sloped round, chisel
Needle shaped
Hot air nozzle
198
Width
mm
Shelf
Pack
Type
Code No.
Description
72-01-01
0051628599
Soldering tip, round shaped
3,0
1
72-01-02
0051628699
Soldering tip, chisel shaped
10,0
1
72-01-03
0051628799
Soldering tip, sloped round 45°
4,0
1
72-01-05
0051628899
Soldering tip, needle shaped
1,5
1
72-01-06
0051628999
Soldering tip, chisel sloped 45°
4,0
1
72-01-07
0051629099
Soldering tip, chisel shaped
1,5
1
72-01-12
0051629199
Soldering tip, chisel shaped
4,0
1
72-01-13
0051629299
Soldering tip, chisel sloped 45°
12,5
1
72-01-51
0051629899
Hot air nozzle, ø 3,6 mm
1
72-01-52
0051629399
Hot air nozzle, ø 6,6 mm
1
72-01-53
0051629499
Hot air nozzle, ø 9,7 mm
1
HOBBYKITS FOR POKERWORK AND STAINED GLASS
&
ACCESSORIES
Hobbykit 1 and WH1 for Pokerwork, 25 Watts
• Specially designed for wood, cork, leather burning
and candle sculpting
• Consist of hobby iron, 4 double-ended stylus points from
fine to blocking and patterning, tool support and operating
instruction (Type WH1 includes also 5 patterned tips)
Type
Code No.
Watts
Volts
Hz
Weight
g
Shelf
Pack
Hobbykit1
0056202299
25
230
50
452
6
WH1 (GB)
0051205099
25
230
50
311
6
Stylus Points and Tips for Hobbykit 1 and WH1
• All stylus points and tips packed on card
BG10
BS10
BS11
BS12
Shelf
Pack
Type
Code No.
Description
BG10
0054003799
4 double-ended tips
6
BS10
0054004099
5 stylus points for decorative designs
6
BS11
0054003999
5 stylus points for decorative designs
6
BS12
0054003899
5 stylus points for decorative designs
6
Polystyrene Cutters and Hot Knifes for Hobbykit 1 and WH1
• All cutting tips and hot knifes packed on card
PW11
PW10
Shelf
Pack
Type
Code No.
Description
PW10
0054004899
3 cutting blades, 20 mm, 45 mm and curved
6
PW11
0054005699
5 hot knifes for modelwork
6
199
HOBBYKITS FOR POKERWORK AND STAINED GLASS
&
ACCESSORIES
Hobbykit 2 and WH3 Stained Glass Soldering Irons, 75 Watts
• A safe hobby iron designed for decorative glass work
(Tiffany) around the house, such as lamp shades and
glass pictures
• Consist of hobby iron with tip SG10 (WH3 includes 2 tips,
WHA30 and WHA31), tool support and operating instruction
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056204299
75
230
50
472
6
0051205299
75
230
50
369
6
Type
Code No.
Hobbykit2
WH3 (GB)
Soldering Tips for Hobbykit 2 and WH3
• All soldering tips packed on card
SG10
SG11, WHA30, WHA31
200
Width
mm
Shelf
Pack
7,0
6
Type
Code No.
Description
SG10
0054327099
Longlife tip, iron plated, sloped 45°
SG11
0054327299
Longlife tip, iron plated, chisel shaped
5,0
6
WHA30
0054005399
Longlife tip, iron plated, chisel shaped
10,0
6
WHA31
0054005499
Longlife tip, iron plated, chisel shaped
6,0
6
SOLDERING IRONS FOR STAINED GLASS
&
ACCESSORIES
Temperature Controlled Stained Glass Iron, 100 Watts
• Temperature controlled stained glass iron made to the
highest professional standards
• Temperature is controlled according to the Weller®
Magnastat Principle
• The Weller® soldering irons with automatic temperature
control guarantee an outstanding heat supply and restrict
the energy supply when the tool idles
• Working temperature: approx. 340°C
• Idle temperature: approx. 370°C
• Consist of stained glass iron with tip SG40,
iron support and operating instruction
Type
Code No.
Profikit 100
0056208699
Watts
Volts
Hz
Weight
g
Shelf
Pack
100
230
50
445
1
Soldering Tips for Profikit 100
• All soldering tips packed on card
SG40
SG41
SG43
Width
mm
Shelf
Pack
Longlife tip, iron plated, straight, sloped 45°
7
6
Longlife tip, iron plated, straight, chisel shaped
7
6
Longlife tip, iron plated, bent, chisel shaped
7
6
Type
Code No.
Description
SG40
0054005799
SG41
0054005899
SG43
0054006099
201
SOLDERING IRONS FOR STAINED GLASS
&
ACCESSORIES
Temperature Controlled Stained Glass Iron, 200 Watts
• Temperature controlled stained glass iron made to the
highest professional standards
• Temperature is controlled according to the
Weller® Magnastat Principle
• The Weller® soldering irons with automatic temperature
control guarantee an outstanding heat supply and restrict
the energy supply when the tool idles
• Working temperature: approx. 290°C
• Idle temperature: approx. 335°C
• Consist of stained glass iron with hammer soldering tip
SG50, iron support and operating instruction
Type
Code No.
Profikit 200
0056209699
Watts
Volts
Hz
Weight
g
Shelf
Pack
200
230
50
976
1
Soldering Tips for Profikit 200
• All soldering tips packed in polybag
SG51
SG52
SG53
SG50
202
Width
mm
Shelf
Pack
Type
Code No.
Description
SG50
0054006199
Longlife tip, iron plated, hammer shaped, ø 16 mm
1
SG51
0054006299
Longlife tip, iron plated, hammer shaped, ø 6 and 10 mm
1
SG52
0054006399
Longlife tip, iron plated, chisel shaped, straight
10
1
SG53
0054006499
Longlife tip, iron plated, chisel shaped, bent
10
1
SOLDERING STATION FOR STAINED GLASS
&
ACCESSORIES
Soldering Station for Stained Glass, 80 Watts
• The fast heat-up time and 80 watts power of the WSS80,
starts you soldering while slower stations are still heating up
• The higher power reserve increases the ability to work on
large, stained glass soldering sections without interruption
caused by a drop in power
• Despite the 80 watts power, the handle of the iron always
stays cool
• The small sized WSS80 gives the user more space on
the workbench
• Consist of soldering station with iron fitted with soldering tip
SG81, safety iron support and oerating instruction
Watts
Volts
Hz
Weight
g
Shelf
Pack
0056804699
80
230
50
2600
1
0056804399
80
230
50
2600
1
Type
Code No.
WSS80
WSS80 (GB)
Soldering Tips for WSS80
5mm
• All soldering tips packed in polybag
SG82
SG81
SG80
Width
mm
Shelf
Pack
Longlife tip, iron plated, straight, sloped 45°
7
6
0054013299
Longlife tip, iron plated, straight, sloped 35°
7
6
0054013399
Longlife tip, iron plated, straight, chisel shaped
5
6
Type
Code No.
Description
SG80
0054013199
SG81
SG82
203
204
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising