tg series compact tractors

tg series compact tractors
TG SERIES COMPACT TRACTORS
36 – 60hp
JAPANESE BUILT QUALITY TRACTORS
POWERFUL
ENGINES
Iseki’s TG Series sets the benchmark
for compact tractor performance.
Designed and manufactured in Japan,
the TG Series is built to exceptional
standards of quality – starting from
the front lights through to the back
three-point linkage.
Every component, including the engine
and transmission, features Iseki’s
stamp of approval for quality
and excellence that is rarely seen
in the compact tractor category.
With a host of options and features
to choose from, the Iseki TG Series
provides unrivalled reliability to get the
job done fast, efficiently and in comfort.
It’s how Iseki Make it Easy!
Powered by Iseki 3 and 4 cylinder engines,
the TG Series offers more power when
you need it. With peak torque developed
at low engine speeds, it makes easy work
of tough conditions.
Access to regular service points and critical
components is made easy thanks to the clever
design of the engine and bonnet.
EFFICIENT POWER
ENGINE SERVICEABILITY
• Maximum power
achieved at lower RPM
• Reduced noise levels
• Easy access to regular service points
for easy maintenance and consistent
performance
• Genuine Iseki engine
made in Japan
• A built in fuel filler means you don’t have
to raise the bonnet to fill up
• A removable screen protects the
radiator from debris and is easy to clean
• The air cleaner is easily accessed
and cleaned, located at the front
of the tractor
TRANSMISSIONS FOR EVERY JOB
Iseki’s TG Series transmissions offer
the flexibility and performance required
for today’s ever increasing workloads.
With a choice of heavy-duty Power Shuttle
and Hydrostatic transmissions,
the TG Series makes it easy with smooth,
effortless directional changes and a greater
speed range for your desired application.
HYDROSTATIC TRANSMISSION
• Three-range hydrostatic transmission
available in 39 and 47hp models
• Standard with 4 wheel-drive
and differential lock for exceptional
traction in all conditions
• Single pedal forward/reverse feature
• Directional changes are made via
the feather touch shuttle lever
12 X 12 SPEED POWER
SHUTTLE TRANSMISSIONS
• 12 x 12 speed, heavy duty Forward
and Reverse Power Shuttle Transmission
• Quick directional changes without
clutching
• Available in 36, 47 and 60hp models
• Wet disc brakes – large oil immersed
multi-disc brakes means longer lasting,
as well as accurate and precise stopping
CRUISE CONTROL
• Electronically controlled cruise control
• Uninterrupted speed adjustment
• Memory select speed setting
OPERATOR COMFORT
Large instrument panel
LUXURY
CAB
Forward/Reverse power shuttle
Hand throttle lever
All-work versatility. All-weather capability.
That’s what you get with Iseki’s compact
cabin tractors. The spacious and cleverly
designed cabin allows you to put in a hard
day’s work, day after day.
Large ISO mounted flat platform
Full rubber-padded floor mat
Brake pedal
Nothing says luxury, all weather convenience
and quiet operation quite like Iseki cabins.
4 speed gear/shift lever
Auxiliary hydraulics
joystick control
The deluxe design offers standard dual side entry,
outstanding visibility and exceptional comfort
that will keep you working at optimum
performance for longer.
Parking brake lever
3 range selection lever
Three point linkage
position control lever
SPACIOUS CABIN
•The glass enclosed cabin has
been designed with generous
head and leg room
4WD lever
Deluxe mechanical
suspension operator’s seat
Electro hydraulic PTO
engagement switch
Rear auxiliary hydraulic levers
•Featuring large doors on both
sides for convenient entry
and exit with hand grips on
the door frames for easy
access to the cab
•Provides a comfortable
work environment in all
weather conditions
TEMPERATURE
CONTROL
•Heating and
air-conditioning controls
are located within easy
reach in the cab headline
•Two vents in the front
of the cab, two in the
centre, two on the sides
360º VIEWS
•The wide front window on the cab
offers excellent visibility, as do rear
and corner windows – all of which
can be opened
•A clear line of sight from
the operator’s seat to the rear
of the tractor allows you to see
the implement working
•Standard front and rear windshield
wiper and washers help to keep you
working in all weather conditions
BUILT TOUGH
THREE POINT LINKAGE
When the going gets tough, it’s time
to turn to Iseki. Heavy duty axles on the
TG Series handle the heaviest of loads,
making front-end-loader work a breeze,
while the reinforced chassis accepts
a wide range of multi-purpose accessories.
The three-point linkage provides huge lift
capacity and allows for quick and easy
fitting of implements.
• Huge three point linkage lift capacity
up to 1780kg
• Cat 1 (and Cat 2 on TG5570) linkage
with position and draft control
• Designed for easy access and implement
attachment with adjustable telescopic
stabilisers and crank-type lift rod
• Large 47.7L/min hydraulic pump
capacity with open centre hydraulic
system on all models
• Electro-hydraulic PTO can be engaged
by flicking a switch, without having
to depress the clutch
HEAVY DUTY AXLES
• Robust front and rear axle capacities
to handle the toughest of jobs
• Reinforced chassis to accept a wider
range of multi-purpose accessories
• Ideal for front-end loader applications
• Choose your desired footprint with
a range of wheel and tyre options
• Tight turning circle to give a gentler
footprint and better traction
EXCEPTIONAL VERSATILITY
FRONT-END LOADER
• The TG Series can also be easily
equipped with hydraulically operated
front-end loaders
• The factory fitted joystick gives the
operator precise control of the loader
• Featuring an open centre hydraulic
system with up to 47.7L/min,
allowing you to lift more and work faster
When it comes to an all-round performer,
you can’t go past Iseki. Whether it’s on the farm,
around municipalities or for grounds-care tasks,
the TG Series leads the field with versatility.
Front-end loader work is made easy with precise
control to lift, lower, float and dump.
Pre-plumbed hydraulic valves allow hydraulic
flow up to 47.7L/min meaning you can lift more
and work faster.
HYDRAULIC VALVES
AND JOYSTICK
• Standard with two front hydraulic
remote valves and joystick lever
• Pre-plumbed for easy attachment
of front end loaders
• Lever controls for rear auxiliary
hydraulics
• Two rear remotes fitted as standard
TG6370P.4R TG6400H.4RTG6400H.4C TG6490H.4CTG6490P.4R TG6490P.4C TG5570
MODEL
TG5570
ROPSROPSCAB CAB ROPSCAB ROPSCAB
Output
Rated (Gross) kW (HP)
26.6 (35.7)
28.7 (38.5)
28.7 (38.5)
35.1 (47.1)
35.1 (47.1)
35.1 (47.1)
44.1 (60.0)
44.1 (60.0)
Engine
Iseki E3CG
Iseki E3CDT
Iseki E3CDT
Iseki E4CG
Iseki E4CG
Iseki E4CG
Iseki E4DE
Iseki E4DE
Number of Cylinders
333 44 4 44
Displacement litres
1.6471.4981.498 2.1972.197 2.197 2.9952.995
Fuel Tank
litres
404040 5353 53 5050
DRIVE TRAIN
Clutch Type
Dry Single
N/A
N/A
N/A
Dry Single
Dry Single
Pwr Shuttle
Pwr Shuttle
Shuttle
STDSTDSTD STDSTD STD STDSTD
Transmission
Main
4
Servo HST
Servo HST
Servo HST
4
4
4
4
Sub
3
3
3
3 x 2 (Hi-Lo)
3
3
3
3
Gear Speeds
F12/R12
3
3
3 x 2
F12/R12
F12/R12
F/R/R12
F/R/R12
PTO
Clutch Type
IndependentIndependentIndependent IndependentIndependent Independent IndependentIndependent
Rear PTO
540540540 540540 540 540540
REAR AXLE
Diff-lock
STDSTDSTD STDSTD STD STDSTD
Brake system
Wet disc
Wet disc
Wet disc
Wet disc
Wet disc
Wet disc
Wet disc
Wet disc
Parking brake
Lever Type
Lever Type
Lever Type
Lever Type
Lever Type
Lever Type
Lever Type
Lever Type
WHEEL & TYRE OPTIONS
Tread Pattern
TurfTurfTurf TurfTurf Turf
AgAgAg AgAg Ag AgAg
IndustrialIndustrialIndustrial IndustrialIndustrial Industrial
FRONT AXLE
Drive Type
4WD4WD4WD 4WD4WD 4WD 4WD4WD
Steering System
Power steering
Power steering
Power steering
Power steering
Power steering
Power steering
Power steering
Power steering
Tilt steering
STDSTDSTD STDSTD STD STDSTD
HYDRAULICS
Lift Capacity
at link end
kg
127012701270 15801580 1580 17001700
at 24” behind
kg
115011501150 14001400 1400 15001500
Pump Capacity litres/min
47.747.747.7 47.747.7 47.7 48.648.6
Position control
STDSTDSTD STDSTD STD STDSTD
Joy-stick
STDSTDSTD STDSTD STD STDSTD
Hydraulic Outlet Valves @ Rear: STD (Max)
2 (2)
2 (2)
2 (2)
2 (2)
2 (2)
2 (2)
2 (2)
2 (2)
3 POINT LINKAGE
Category
III II I I/II
I/II
Lift Rod Adjustment (RHS)
Turnbuckle Turnbuckle Turnbuckle Turnbuckle Turnbuckle
Turnbuckle
Bevel
Bevel
Check Chain TurnbuckleTurnbuckleTurnbuckle TurnbuckleTurnbuckle Turnbuckle TurnbuckleTurnbuckle
Lower Linkage end
Hook end
Hook end
Hook end
Hook end
Hook end
Hook end
Bull end
Bull end
Clevis
STDSTDSTD STDSTD STD -
-
ELECTRICAL
Battery
12V 55Ah 582A
12V 55Ah 582A
12V 55Ah 582A
12V 72Ah 600A
12V 72Ah 600A
12V 72Ah 600A
12V 710 CCA
12V 710 CCA
Digital panel
STDSTDSTD STDSTD STD NA NA
DIMENSIONS
Overall Length
Overall Width
Overall Height
Wheel Base
Shipping Weight
mm
3,0703,0703,070 3,3703,370 3,370 3,4203,420
mm
1,5451,5451,545 1,8101,810 1,810 1,6801,680
mm
2,1802,5702,275 2,3252,300 2,325 2,3302,330
mm
1,7701,7701,770 1,9001,900 1,900 2,0002,000
kg
1,3751,3851,535 1,8701,545 1,715 1,8552,015
www.iseki.com.au
Specifications, standard and optional equipment on products change from time to time. Please consult your local dealer
to ensure your expectations are matched by the product which will be available locally at the time you take delivery.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising