Wireless Multi-Client Bridge/AP 2611CB3 PLUS

Wireless Multi-Client Bridge/AP 2611CB3 PLUS
Wireless Multi-Client Bridge/AP
2.4 GHz
802.11 b
2611CB3 PLUS (Deluxe)
11 Mbps
The Wireless Multi-Client Bridge/Access Point operates in
the 2.4 GHz frequency spectrum supporting the 802.11b
(2.4GHz, 11Mbps) wireless standards. It's the best way to
add wireless capability to your existing wired network, or to
add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all
wireless transmissions through 64/128-bit WEP data
encryption and also supports WPA. The MAC address
filter lets you select exactly which stations should have
access to your network. With the Wireless Multi-Client
Bridge/Access Point, you'll experience the best wireless
connectivity available today.
Features
Benefits
Up to 23dBm(200mW) RF Output Power
Up to 9 times coverage of Regular MultiClient Bridge
11Mbps IEEE 802.11b Compliant
Fully Interoperable with IEEE 802.11b
Compliant
Point-to-point, Point-to-multipoint Wireless
Connectivity
Let users transfer data between two
buildings or multiple buildings
Plug and Play
No driver needed, easy and quick to connect
your Ethernet device to Wireless
Power-over-Ethernet (IEEE802.3af
Compliant)
Flexible Access Point locations and cost
savings
64 /128-bit WEP data encryption
Powerful data security
Hide SSID (AP Mode)
Avoids unallowable users sharing bandwidth,
increases efficiency of the network
DHCP Client
Simplifies network administration
Web-based configuration
Helps administrators to remotely configure or
manage the Multi-Client Bridge with web
browser
MAC address filtering (AP Mode)
Ensures secure network connection
Seamless Roaming
Allows users to travel between APs without
losing their network connection
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput
may vary. Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
11/16/2006
Technical Specifications
Data Rates
1, 2, 5.5, 11 Mbps
Standards
IEEE802.11b, IEEE802.3,
IEEE802.3u
Compatibility
IEEE 802.11g/ IEEE 802.11b
compliant
Power Requirements
Power Supply: 90 to 240
VDC ± 10% (depends on
different countries)
Device: 12 V/ 1A
Status LEDs
LAN: Link, WLAN: Link,
Power: on/off
Regulation Certifications
FCC Part 15/UL, ETSI
300/328/CE
RF Information
Frequency Band
2.400~2.484 GHz
Media Access Protocol
Carrier Sense Multiple
Access with Collision
Avoidance (CSMA/CA)
Modulation Technology
Direct Sequence Spread
Spectrum (DSSS)
11 Mbps / 5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
Operating Channels
11 for North America, 14 for
Japan, 13 for Europe,
2 for Spain, 4 for France
Receive Sensitivity (Typical)
-94dBm @ 1Mbps
-86dBm @ 11Mbps
Available transmit power
(Typical)
21 ± 2dBm @1, 2, 5.5 and
11Mbps (Depend on
Different Countries’
Regulation)
RF Connector
TNC Type (Female Reverse)
Networking
Topology
Ad-Hoc, Infrastructure
Operation Mode
Point-to-Point/ Point-toMultipoint Bridge/ AP/ Client
Bridge
Interface
One 10/100Mbps RJ-45 LAN
Port
Security
Related Product(s)
11g Wireless Cardbus Adapter
3054CB+ Aries2
SPC-362
11b High-power Wireless
PCMCIA Adapter
2511CD PLUS
11g High-power Client Bridge
3054CB3+ (Deluxe)
11b Outdoor AP/ Router
2511HS+
2511BG+
MAC address filtering
WEP encryption (64/128 bit)
Hide SSID in beacons
Layer 2 Isolation
IP Auto-configuration
DHCP client/server
Management
Configuration
Web-based configuration
(HTTP)
Firmware Upgrade
Upgrade firmware via webbrowser
Physical
Dimensions (HxWxD)
125(L)mm * 108(W)mm *
31(H)mm
4.9 (L)in* 4.3(W)in * 1.2(H)in
Weight
350 g (0.8 lb.)
Environmental
Temperature Range
Operating: -10°C to 45°C
(14°F to 113°F) Storage: -40°Cto 70°C (-40°F
to 158°F)
Humidity (non-condensing)
5%~95% Typical
Package Contents
One Multi-Client Bridge/AP
One Power Adapter
One CAT5 UTP Cable
One Quick Start Guide
One CD-ROM with User’s
Manual
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput
may vary. Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
11/16/2006
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising