ONGA 1320 Pool DistGuide - Hon Kee Pumps Compnay Limited

ONGA 1320 Pool DistGuide - Hon Kee Pumps Compnay Limited
Pool Pumps
Innovative Products.
Inspired People.
Distributor
Catalogue
No company offers your sales team a
wider range of pumps than Pentair
Water. We help you cover every niche
in the market, from low cost above
ground pools through to pumps to
satisfy the needs of your most
discerning customers for their large
residential pools.
Also included in our range are pumps
for solar applications, small commercial
pool installations, and high pressure
pool pumps for swim spas and in-floor
cleaning systems.
Pool Pump Nomenclature
PP
OOO
S
A*
XX
SF
55
0
1
00
Pump (PP)
MP
Max-E-Pro
SF
SilentFlo
Variations (XX)
As standard products
covered by the first six or
seven digits require new
variations, the last two
digits will be incremented
and recorded.
PPP Pantera
LTP Leisuretime
Output (000)
N x 10 = Nominal watts
Each pump has been designed with
best possible efficiency in mind...
e.g. 55 = 550
75 = 750
110 = 1100
150 = 1500
Approval (A)
* Where N =
- Three digit number for
pumps > 1000 Watts
- Two digit number for
pumps < 1000 Watts
Power supply (S)
0
1
2
3
4
230V,
230V,
220V,
220V,
400V,
50Hz,
50Hz,
60Hz,
60Hz,
50Hz
e.g. A special lead or
packaging requirement.
10
15
10
15
0
None
1
Australia / New Zealand
2
GS
3
CE
4
Korean
5
UL
*
Not used for LTP/PPP
Amp
Amp
Amp
Amp
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
2
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Contents
Page
Sta-Rite Max-e-Pro
4
Onga SilentFlo
7
Onga Pantera
10
Onga Leisuretime
13
Pump Installation
16
Pump Troubleshooting
18
Selection Chart
Onga Leisuretime
LTP400
LTP550
LTP750
LTP1100
Onga Pantera
PPP550
PPP750
PPP1100
PPP1500
PPP1500H
Onga SilentFlo
SF550
SF750
SF1100
SF1500
Sta-Rite Max-E-Pro
MP730
MP930
MP1100
MP1500
MP2200
0
20000
40000
60000
80000
100000 120000 140000 160000 180000 200000 220000
Pool Volume (litres)
Upper limit based on a 6 hour turnover, operating at 8m total head.
Lower limit based on a 4 hour turnover, operating at approximately 15m total head.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
3
Max-E-Pro Pool Pump
For the discerning buyer who does not want to sacrifice
quality or performance, the Sta-Rite Max-E-Pro range
of pool pumps set the standard. This pump series was
designed to make sure your pool setting is all about fun
and relaxation - not the equipment that runs it.
The heavy duty motor is specifically designed to offer
extended life and quiet operation. The pump end is
precision moulded from industrial grade materials for
corrosion resistance. The impeller is designed for high
efficiency providing economical running costs.
Performance, quality, designed to last, these are
the features you want and the Max-E-Pro delivers.
The Max-E-Pro is ideally suited to swimming pools,
swim spas and pools with in-floor cleaning systems.
Typical Applications
• High end swimming pools
• Swim spa
• Pools with In-floor cleaning
systems
Features
Benefits
Quiet Heavy-Duty Motor
Reliability and quality are integral benefits of this continuously rated motor.
Low noise levels result in peaceful pump operation.
Elevated Motor
Designed to dampen sound and vibration also keeping ground moisture away from the
motor extending the life of your pump.
Stainless Steel Motor Shaft
Extending the life of the pump shaft by utilising corrosion resistant Stainless Steel.
Quick-Lock Lid, with permanently
lubricated o-ring
Quick and easy routine maintenance. You do not require tools to access the strainer basket
and with the clear lid you can check at a glance when cleaning is needed.
Integrated 50mm Barrel Unions
Quick and easy to install, creating a perfect seal and the ability to remove the pump
without flexing the pipework.
Thermoplastic Casing & Internals
Pool water can become corrosive if not checked regularly or maintained properly and
by using the latest in technology to manufacture precision parts out of high quality
material the Max-E-Pro stands up to the task.
Electrical Approvals
Rest easy knowing your Max-E-Pro pool pump has passed all stringent Australian
Standards AS/NZS 3350 for safety and is approved for installation within the
wetted zone of the pool area. Approvals Q98344, Q99350.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
4
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Max-E-Pro Pool Pump
Pump Performance Chart
Head (metres)
25
Disclaimers Every endeavour has been made
to publish the correct details in this data sheet.
No responsibility will be taken for errors,
omissions or changes in product specifications.
All performance data taken at sea level.
20
15
Dimensional Diagram
10
5
0
MP730
0
100
200
MP1500
MP930 MP1100
300
400
500
Pump Discharge and Suction Ports have Dual Purpose
connections. 50mm BSP Fi threads (internal) and also supplied
with the complete pump, Unions to suit 50mm UPVC pipe.
(Spare Part Barrel Union No: PKG 188)
MP2200
600
700
260
Discharge
Materials
Suction
Component
Pump Casing:
Impeller:
Baffle:
Diffuser:
Material
30% Glass Filled Polypropylene
30% Glass Filled Polypropylene
40% TF Polypropylene
20% Glass Filled ABS
Yoke:
Drain Plug:
Shaft Sleeve:
Motor Shaft:
End Shield:
Hair & Lint Pot O-Ring:
Hair & Lint Pot Lid:
Casing O-Ring:
Barrel Union O-Ring:
Barrel Union:
Cord/Plug:
20% Glass Filled ABS
Polypropolene
20% Glass Filled Polycarbonate
303 Stainless Steel
Enamel Painted Aluminium
Low Friction Nitrile
Polycarbonate
Nitrile
Nitrile
ABS
Approved to AS/NZS 3112
350
370**
270
175
410
525
230
A
13mm Dia
285
**Additional clearance 160mm for removal of strainer basket
Pump Dimension A
Pump Model
Single Phase
3 Phase
MP750
650
650
MP930
650
650
MP1100 MP1500 MP2200
650
650
695
650
650
670
Note: unless otherwise specified, all dimensions in mm. Fixing slots accept 10-13mm fasteners
180mm minimum clearance required for cooling and servicing from motor cowl.
Mechanical seal, 3/4” Type 6
Flexible Bellows:
Stationary Face:
Rotating Face:
Spring:
Nitrile
Ceramic
Carbon
18-8 Stainless Steel
Model Data
Pump
Model
Abbreviation
Unit of Measure
Motor
power
P1
Watt
MP730100
MP930100
MP1100100
MP1108100
MP1500100
MP1508100
MP2201100
MP2208100
Pump
Model
Abbreviation
Unit of Measure
MP730100
MP930100
MP1100100
MP1108100
MP1500100
MP1508100
MP2201100
MP2208100
Supply
Voltage
Phase
P2
Watt
V
850
940
1300
1230
1710
1750
2020
2130
640
730
1000
950
1320
1350
1550
1640
230
230
230
400
230
400
230
400
Run coil
resistance
Start coil
resistance
Ohms
Ohms
3.43
3.43
1.51
6.92
1.51
6.92
0.95
3.96
6.18
6.18
3.63
6.59
3.63
6.59
1.94
3.62
Locked
Rotor current
LRA
Amp
Capacitor
n
Full Load
current
FLA
Amp
Thermal
Insulation
protection cutout
class
Speed
(2 pole)
µF
ºC
1
1
1
3
1
3
1
3
4.1
4.4
6.5
2.7
9.0
3.5
11.6
4.3
19
19
40
23
40
23
65
38
20
20
30
30
40
-
150/ Auto
150 / Auto
150 / Auto
Ext OL
150 / Auto
Ext OL
150 / Manual
Ext OL
F
F
F
F
F
F
F
F
2800
2800
2800
2800
2800
2800
2800
2800
Connection
(3 Phase)
IP
Rating
Sound
Power Level
SPL
dBA
Bearing
temp rating
Max Working
temp
Max water
temp
Min water
temp
Max working
pressure
ºC
ºC
ºC
ºC
kPa
Star
Star
Star
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
64
62
68
69
69
72
72
73
120
120
120
120
120
120
120
120
50
50
50
50
50
50
50
50
35
35
35
35
35
35
35
35
5
5
5
5
5
5
5
5
360
360
360
360
360
360
360
360
rpm
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
5
Max-E-Pro Pool Pump
Service Parts
Model
Items with suffix K
are packaged for
display
Item
PN Single Phase
PN 3 Phase
Description
Description
1
3D
3E
MP730100
MP930100
MP1100100
MP1500100
MP2201100
-
-
MP1108100
MP1508100
MP2208100
730W (1HP)
930W (1HP)
1100W (1HP)
1500W (2HP)
2200W (3HP)
801009
702594K
801009
702594K
800563
800565
702594K
800564
800565
702594K
C203-194PSS
U9-228A
700270
WC36-22
C19-37A
C105-238PPB
C1-271P1
U9-374
U43-21SS
U30-542SS
17307-0110W
17307-0111S
35505-1440
C8-58P
800405
U30-918SS
700312
C104-79P
PKG 188
17350-0001
-
C203-194PSS
U9-228A
700270
WC36-22
C19-37A
C105-238PRB
C1-271P1
U9-374
U43-21SS
U30-542SS
17307-0110W
17307-0111S
35505-1440
C8-58P
800405
U30-918SS
700312
C104-79P
PKG 188
17350-0000
-
C203-194PSS
U9-228A
700270
WC36-22
SRC19-37A
C105-238PLBAB
37337-6080
C1-271P
U9-374
U43-21SS
U30-922SS
17307-0110W
17307-0111S
35505-1440
C8-58P
800405
U30-918SS
700312
C104-79P
PKG 188
17350-0001
SR35505-1426
C203-194PSS
U9-228A
700270
WC36-22
SRC19-37A
C105-238PHAB
37337-6080
C1-271P
U9-374
U43-21SS
U30-922SS
17307-0110W
17307-0111S
35505-1440
C8-58P
800405
U30-918SS
700312
C104-79P
PKG 188
17350-0001
SR35505-1426
Qty
Motor - 1 Phase
Motor - 3 Phase
2
Screw
3
Motor Pad
4
Water Slinger
5
Seal Plate
6
O-ring - Body
7
Shaft Seal
8
Clamp Knob
9
Clamp
10 Impeller
10A Impeller Screw
11 Diffuser
12 O-ring - Diffuser
13 Lockwasher
14 Screw - Diffuser
15 Tank Body Assembly
16 Trap Cover incl. #17
17 O-ring only - Trap Cover
18 Basket
19 Drain Plug & O-ring
20 Screw - Base
21 Washer - Base (Set of 20)
22 Base with Motor Pad
23 Union Kit
NS Insert - Stainless Steel
NS Impeller screw O-ring
1
1
4
1
1
1
1
1
1
1
1
1
1
1
5
5
1
1
1
1
2
2
2
1
1
1
1
3F
3G
3H
Part number
800563
801366
702594K
See item 22
c/w motor
C203-194PSS
U9-228A
700270
WC36-22
C19-37A
C105-238PSB
37337-6080
C1-271P1
U9-374
U43-21SS
U30-542SS
17307-0110W
17307-0111S
35505-1440
C8-58P
800405
U30-918SS
700312
C104-79P
PKG 188
17350-0001
SR35505-1426
NS Not Shown
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
6
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
SilentFlo Pool Pump
Pentair Water answers the latest issues in
the Swimming Pool Industry with the
release of the SilentFlo range of pumps.
These are the quietest and most efficient
pumps available, to minimise the cost and
maximise the enjoyment of pool ownership.
Typical Applications
• Pools from 20,000 litres up to
130,000 litres.
• High quality pools where quiet
operation is a must.
• Pools where high efficiency is
required.
Features
Benefits
Extremely quiet hydraulic design
Your customers will be able to run this pump at night, without
disturbing the neighbours. This allows them to take advantage
of low cost off-peak tariffs.
Extremely efficient hydraulic
design
Minimises running costs for your customers - more turnovers for
less dollars
Elevated base - further dampens
sound and vibration, and keeps
the pump above sitting water
Even quieter operation, and minimises pump corrosion by keeping
it out of the water
Stainless Steel motor shaft
Extends the life of the pump by reducing corrosion
Large volume strainer basket
Minimises the maintenance requirement by extending the time
between strainer basket clean outs
Included 50mm barrel unions
Quick and easy to install, while allowing pump removal without
flexing pipework
Dual connections: 50mm thread
or 50mm barrel unions
Allows piping flexibility - threaded connections allow for permanent
installation - service is still possible by removing the motor and yoke
from the casing
Thermoplastic casing and
hydraulic parts
Total corrosion resistance for long life and peace of mind
Electrical approvals
The SilentFlo range of pool pumps have passed all the requirements of
AS/NZS 60335.2.41:2004 for safety, and is approved for installation
within the wetted zone of the pool area
Captive bolts
Easy servicing, no lost fasteners
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
7
SilentFlo Pool Pump
Pump Performance Chart
Head (metres)
20
Disclaimers Every
endeavour has been
made to publish the
correct details in this
leaflet. No responsibility
will be taken for errors,
omissions or changes in
product specifications.
All performance data
taken at sea level.
15
SF1500100
10
SF550100
SF750100
200
300
Flow (litres/minute)
SF1100100
5
0
0
100
500
400
600
Line Drawings
Motor
Type:
Thermal overload:
Temperature rise:
Voltage:
Frequency:
TEFC 2 pole
Internal, automatic reset
Class F
230V +/- 10%
50Hz
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
Materials
Component
Material
Pump Casing
Impeller
Diffuser
Yoke
Drain plugs
Motor shaft
End shield
Strainer basket
Strainer basket o-ring
Strainer pot lid
Barrel unions
Base
Seal bellows
Seal stationary face
Seal rotating face
Seal Spring
Cord/Plug
Reinforced Polypropylene 40% Glass Filled
Polyphenylene Ether
Polypropylene HP TF 40%
Polypropylene 40% Glass Filled
Polypropylene
SS 303
Cast Aluminium
High Impact Polystyrene
Low friction nitrile
Makrolon Polycarbonate
Acrylonitrile Butadiene Styrene (ABS)
Copolymer Polypropylene
Nitrile
Aluminium oxide
Carbon
SS 316
Approved to AS/NZS 3112
Dimension Table
Pump Model
SF550
SF750
SF1100
SF150
A
595
595
610
650
Unless otherwise specified, all dimensions in mm.
Fixing holes accept 12mm fasteners.
Model Data
Pump
Model
Abbreviation
Unit of Measure
P1
Watt
P2
Watt
V
n
Full
Load
current
FLA
Amp
µF
ºC
SF550100
SF750100
SF1100100
SF1500100
580
690
1020
1540
400
485
715
1075
230
230
230
230
1
1
1
1
2.6
3.0
4.5
6.7
14
14
22
28
25
25
25
30
150
150
150
150
F
F
F
F
2800
2800
2800
2800
Run
coil
resistance
Start
coil
resistance
IP
Rating
Bearing
type
Bearing
temperature
rating
Max
Working
temp
Max
water
temp
Min
water
temp
Max
working
pressure
ºC
ºC
ºC
ºC
kPa
IP55
IP55
IP55
IP55
6203
6203
6203
6203
120
120
120
120
50
50
50
50
35
35
35
35
5
5
5
5
360
360
360
360
Pump
Model
Motor
power
Supply
Voltage
Phase
Abbreviation
Unit of Measure
Ohms
Ohms
Sound
Pressure
Level
SPL
dB(A)
SF550100
SF750100
SF1100100
SF1500100
4.64
4.64
3.22
1.99
5.69
5.69
5.69
3.78
56
56
59
61
Locked
Rotor
current
LRA
Amp
Capacitor
Thermal
protection
cutout
Insulation
class
Speed
(2 pole)
rpm
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
8
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
SilentFlo Pool Pump
Service Parts
Items with suffix K are
packaged for display
Item
Description
Model
SF550100
SF750100
SF1100100
SF1500100
Part Number
SF550100
SF750100
SF1100100
SF1500100
Description
550W
7500W
1100W
1500W
Qty
Part number
1
Motor
1
801418
801418
801419
801420
2
Slinger1
1
801429
801429
801429
801429
3
Seal Plate
1
C3-184P
C3-184P
C3-184P
C3-184P
4
Shaft seal
1
5
Casing o-ring
1
1660500
1660500
1660500
1660500
6
Impeller
1
801424
801425
801426
801427
7
Diffuser
8
Diffuser o-ring
9
Lint Pot lid
1
801432
801432
801432
801432
10
Barrel unions
2
PKG 188
PKG 188
PKG 188
PKG 188
801433
2
801428 (single) 800900 (pack of 25)
1
801421
801422
801423
801423
1
801430
801430
801430
801430
11
Basket lid o-ring
1
801433
801433
801433
12
Lint Pot
1
C8-58P
C8-58P
C8-58P
C8-58P
13
Pump casing3
1
C176-58P
C176-58P
C176-58P
C176-58P
14
Drain plug4
2
801434
801434
801434
801434
15
Base
1
C4-77P
C4-77P
C4-77P
C4-77P
16
Motor pad
1
C35-45
C35-45
C35-45
C35-45
NS
Fastener Kit
1
801431
801431
801431
801431
NS
Motor bearing D.E.
1
6203-2RS
6203-2RS
6203-2RS
6203-2RS
NS
Motor bearing N.D.E
1
6203-2RS
6203-2RS
6203-2RS
6203-2RS
NS
Motor Capacitor
1
707157
707157
707157
707158
NS
Fan Cowl (motor)
1
707152
707152
707155
707155
NS
Fan (motor)
1
707153
707153
707156
707156
NS
Terminal Box (motor)
1
707154
707154
707154
707154
1
2
3
4
NS
Slinger comes in a pack of 10
Diffuser service pack includes o-ring
Pump casing includes drain plugs, drain plug o-rings, basket, basket lid, lid o-ring
Drain plug includes o-ring; comes in pack of 2
Not Shown
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
9
Pantera Pool Pump
The Pantera pool pumps have been
specifically designed to incorporate
features that will provide reliable and
efficient pump operation.
The new technology wet end design
integrates a unique moulded end-shield
cover and lip seal protecting the motor
from water damage making this range
ideal for in-ground or above ground pools.
Pantera Pool Pump
Model PPP750
Typical Applications
• Quality in-ground pool
installations
• Above ground pools
Features
Benefits
5 levels of corrosion
resistance
Standard industry practice to protect pool pump motors from water ingress is
normally only on two levels, a mechanical seal and flinger shaft sleeve. With over
30 years experience selling into the pool industry, we know the more protection
you give the motor, the better off you are and that s why we build five levels of
motor protection into the Pantera range of pool pumps.
Elevated motor foot
Incorporating an elevated mount into the pump design keeps moisture well
away from the motor.
Stainless steel motor shaft
Extends the life of the pump shaft by utilising corrosion resistant stainless steel.
Extra large hair and lint pot
with see through lid
The hair and lint pot stops large particles from blocking the pump waterways.
Having a larger than average lint pot means less time cleaning. By
manufacturing the lint pot with a clear lid, it only takes a few seconds
to check whether or not it is full.
Low friction lint pot o-ring
Having a low friction o-ring on the lint pot means you only need to tighten the lid
by hand. No tools are necessary and because you only tighten by hand,
removing the lid is also a simple task.
Self aligning barrel unions
Onga s unique 5 degree self-aligning barrel unions make pipe work
connection a breeze.
Electrical approvals
Rest easy knowing your Pantera pool pump has passed all stringent Australian
Standards AS/NZS 3136:2001 for safety and is approved for installation within
the wetted zone of the pool area. Approvals V00423, V02301, V02302.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
10
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pantera Pool Pump
Pump Performance Chart
25
Head (metres)
20
15
10
Disclaimers Every endeavour has been made to
publish the correct details in this leaflet. No responsibility
will be taken for errors, omissions or changes in product
specifications. All performance data taken at sea level.
5
750
550
0
0
100
200
300
Flow (litres/minute)
1100
1500H
1500
500
400
Operating Conditions
600
Line Drawings
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
Fluid:
Maximum working pressure:
Water (Swimming Pool) temp range:
Ambient temperature:
Water
295 kPa
5ºC-35ºC
50ºC maximum
Motor
Type:
Nominal speed:
IP rating:
Insulation class:
Thermal overload:
Temperature rise:
Frequency:
Voltage:
Bearing type:
TEFC 2 pole continuously rotated
2800 rpm
IP55
Class F
Inbuilt auto reset
Class B
50Hz*
230-240*
Deep groove ball bearing with
double contact lip seal
150ºC
Bearing temperature rating:
*PVC Pipe to AS/NZS 1477. Union to suit metric PVC to ISO727 available upon request.
* Some models also available in 60Hz, check your local Pentair Water office for price and availability.
Materials
Dimension Table
Component
Pump casing:
Impeller: PPP550
Impeller: PPP750-1500H
Baffle:
Diffuser:
Yoke:
Drain cap:
Shaft sleeve:
Motor shaft:
End shield:
Hair and lint pot O-ring:
Casing O-ring:
Barrel union O-ring:
Barrel union:
Hair and lint pot lid:
Cord/Plug:
Material
20% Glass filled ABS
20% Glass filled polycarbonate
20% Glass filled ABS
20% Glass filled ABS
20% Glass filled ABS
20% Glass filled ABS
Polypropylene
Nylon
400 series stainless steel
Powder coated cast iron
Low friction nitrile
Nitrile
Nitrile
ABS
Polycarbonate
Approved to AS/NZS 3112
Pump
Model
PPP550
PPP750
PPP1100
PPP1500
PPP1500H
A
(mm)
630
630
630
630
630
B
(mm)
487
487
495
495
495
C
(mm)
121
121
144
144
144
D
(mm)
185
185
185
185
185
E
(mm)
288
288
288
288
288
F
(mm)
290
290
290
290
314
Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainer
basket for maintenance and cleaning purposes.
Unless otherwise specified, all dimensions in mm. Fixing holes accept 8mm fasteners.
Mechanical seal, 3/4 type 6 (PPP550 1/2”)
Flexible bellows:
Stationary face:
Rotating face:
Spring:
Nitrile
Ceramic
Carbon
18-8 stainless steel
Model Data
Pump
Model
Unit of Measure
PPP550
PPP750
PPP1100
PPP1500
PPP1500H
Motor Kw
Nominal
Supply
Voltage
Phase
(hp)
0.55 (3/4)
0.75 (1)
1.0 (11/4)
1.2 (11/2)
1.5 (2)
240
240
240
240
240
1
1
1
1
1
Full
Load
Current
(A)
2.5
4.3
5.4
6.2
8.2
Locked
Rotor
Current
(A)
8.5
16
24
24
38
Capacitor
mfd
10
20
22
22
40
Sound
Power
Level
dBA*
Supply
Cord
Length
(m)
Net
Weight
Packed
Weight
(kg)
(kg)
62
66
65
66
68
2
2
2
2
2
10.5
10.5
12
12
16.5
12.5
12.5
14
14
18
Carton
Dimensions
LxWxH
(mm)
610 x 190 x 305
610 x 190 x 305
610 x 190 x 305
610 x 190 x 305
670 x 225 x 345
* dB(A) @ 1 metre
Grey Row = Ceased Production
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
11
Pantera Pool Pump
Service Parts
Items with suffix K are
packaged for display
Item
1
2
3
4
5
6
7
8
9
9a
9b
9c
10
11
12
13
14
15
16
17
18
19
20
NS
Model
PPP550
PPP750
PPP1100
PPP1500
PPP1500H
Part number
Description
Ceased Production
PPP550
PPP750
PPP1100
PPP1500
PPP1500H
0.55kW
0.75kW
1.1kW
1.5kW
Description
Qty
Motor
Base
Screw M6 x 16mm CSK
Lip Seal
Nut 5/16” BSW S/S (Pack 12)
Yoke
Screw (Pack 10)
Baffle
Mechanical Seal Kit (Inc.9a,b,c)
Mechanical Seal (Pack 25)
O-ring Casing
Shaft Sleeve Assembly
Diffuser
Impeller
Separator Plate
Barrel Union Assy (Incl o-ring)
Casing & Bowl
Basket Strainer
O-ring - Lid (Pack of 4)
Lid & O-ring Kit (Incl. Item 16)
Screw 5/16” BSW S/S (Set/12)
O-ring - Barrel Union (Pack of 4)
Cap - Priming
Flinger - shaft (not shown)
1
1
2
1
4
1
4
1
1
1
1
1
1
1
1
2
1
1
1
1
4
2
1
1
Part number
801209
304100
703875
606700
800163K
305370
800165
302060K
800582K
800901
702206K
800894K
303460K
510803
408610
801213
305390
302310
702208K
800897K
800903K
702193K
504605
607930
801210
304100
703875
606700
800163K
305370
800165
305300
800887K
800900
702206K
800895K
305460
507530K
408730
801213
305390
302310
702208K
800897K
800903K
702193K
504605
607930
801211
304100
703875
606700
800163K
305370
800165
305300
800887K
800900
702206K
800895K
303460K
506840K
408730
801213
305390
302310
702208K
800897K
800903K
702193K
504605
607930
801211
304100
703875
606700
800163K
305370
800165
305300
800887K
800900
702206K
800895K
303460K
506820
408730
801213
305390
302310
702208K
800897K
800903K
702193K
504605
607930
NS - Not Shown
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
12
1.5kW
July 2006
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
801212
304420
703875
606700
800163K
305370
800165
305300
800887K
800900
702206K
800895K
303460K
507650
408730
801213
305390
302310
702208K
800897K
800903K
702193K
504605
607930
Leisuretime Pool Pump
The range of Leisuretime pool pumps have
been purposefully designed to provide
maximum performance and corrosion
resistance at a realistic cost.
Ideal for small to medium domestic
swimming pools and solar pool heating.
Leisuretime Pool Pump
Model LTP550
Typical Applications
• Swimming pools from 20,000
litres and up to 90,000 litres
• Solar heating circuits
• Above ground pools
Features
Benefits
IP55 (TEFC) motor
With IP55 protection from dust and water, your pump is preserved against the
elements for many years and can be mounted outside. In addition, with a totally
enclosed fan cooled motor the entry of vermin will be reduced.
Electrical approvals
Rest easy knowing your Leisuretime pool pump has passed all stringent
Australian Standards AS/NZS 3136:2001 for safety and is approved for
installation within the wetted zone of the pool area.
Approvals V99108, V02301, V02302.
Elevated motor foot
Incorporating an elevated mount into the pump design keeps moisture well
away from the motor.
Double coated endshield
Unique double zinc plated cast iron endshield for better corrosion protection
extending the life of the pump.
Large hair and lint pot with
see through lid
Easy to clean large hair and lint pot with a clear lid so you can check at a
glance whether or not it is full.
Low friction
lint pot o-ring
Having a low friction o-ring on the lint pot means you only need to tighten the
lid by hand. No tools are necessary and because you only tighten by hand,
removing the lid is also a simple task.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
13
Leisuretime Pool Pump
Pump Performance Chart
25
Head (metres)
20
15
10
5
400
0
0
100
550
750
Disclaimers Every endeavour has been made to
publish the correct details in this leaflet. No responsibility
will be taken for errors, omissions or changes in product
specifications. All performance data taken at sea level.
1100
200
300
Flow (litres/minute)
400
Operating Conditions
500
Line Drawings
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
Fluid:
Maximum working pressure:
Water (Swimming Pool) temp range:
Ambient temperature:
Water
270 kPa
5ºC-35ºC
50ºC maximum
Motor
Type:
Nominal speed:
IP rating:
Insulation class:
Thermal overload:
Temperature rise:
Frequency:
Voltage:
Bearing type:
TEFC 2 pole
2800 rpm
IP55
Class F
Internal
Class B
50Hz*
230-240*
Deep groove ball bearing with
double contact lip seal
150ºC
Bearing temperature rating:
Materials
Component
Pump casing:
Clacker:
Impeller:
Baffle:
Drain plug:
Diffuser:
Basket:
Shaft sleeve:
Motor shaft:
End shield:
Hair and lint pot O-ring:
O-rings:
Barrel unions:
Hair and lint pot lid:
Cord/Plug:
Materials
Glass filled ABS
Polypropylene
Glass filled ABS
Glass filled ABS
Polypropylene
Glass filled ABS
HD polyethylene
Nylon
K-1137 steel
Double zinc coated cast iron
Nitrile
Low friction nitrile
ABS
Polycarbonate
Approved to AS/NZS 3112
*PVC Pipe to AS/NZS 1477. Union to suit metric
PVC to ISO727 available upon request.
Dimension Table
Pump
Model
LTP400
LTP550
LTP750
LTP1100
Mechanical seal, 1/2” type 6 (LTP1100 = type 6 3/4”)
Flexible bellows:
Nitrile
Stationary face:
Ceramic
Rotating face:
Carbon
Spring:
304 stainless steel
A
(mm)
556
578
578
587
B
(mm)
454
454
454
448
C
(mm)
91
91
91
91
D
(mm)
152
152
152
152
E
(mm)
254
254
254
254
F
(mm)
260
260
260
260
Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainer
basket for maintenance and cleaning purposes.
Unless otherwise specified, all dimensions in mm.
Fixing holes accept 8mm fasteners.
Model Data
Pump
Model
Motor Kw
Unit of measure
(hp)
LTP400
LTP550
LTP750
LTP1100
0.4 (1/2)
0.5 (3/4)
0.75 (1)
1.1 (11/2)
Supply
Voltage
Phase
V
230
230
230
230
1
1
1
1
Full
Load
Current
(A)
2.7
3.5
4.3
5.4
Full
Rotor
Current
(A)
Capacitor
mfd
Sound
Power
Level
dBA*
Supply
Cord
Length
(m)
Net
Weight
Packed
Weight
(kg)
(kg)
Carton
Dimensions
LxWxH
(mm)
10
17
17
23
12
20
20
22
60
59
64
65
2
2
2
2
8
8
10
10
10
10
12
12
580 x 185 x 315
580 x 185 x 315
580 x 185 x 315
615 x 210 x 305
* dB(A) @ 1 metre
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
14
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Leisuretime Pool Pump
Service Parts
Items with suffix K are
packaged for display
Item
1
2
3
3a
3b
3c
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Model
LTP400
Part number
Description
LTP400
0.4kW
Description
Qty
Motor
Baffle
Mechanical Seal Kit (Inc. 3a,b,c)
Mechanical Seal (Pack 25)
O-ring Casing
Shaft Sleeve Assembly
Diffuser
Impeller
Casing & Bowl Assy. (Incl.7,8,9,10,11)
Plug - Drain
Guard - Finger
Basket Strainer
O-ring - Lid (Pack of 4)
Lid & O-ring (Screw Type)
Clacker Assembly
O-ring - Barrel Union (Pack of 4)
Barrel Union Assy (Incl. O-ring)
Barrel Union Assy (Complete)
Bolt 5/16”W (Set/12) w/ Washers
Nut 5/16”W S/S (Set/12)
Base & Screws Kit
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
4
4
1
LTP550
LTP750
LTP1100
LTP550
LTP750
LTP1100
0.55kW
0.75kW
1.1kW
801215
302060K
800582K
800901
702206K
800894K
302190K
504823K
800410
504605
508210
302310
702208K
800897K
800904K
702193K
801213
800408
800903K
800163K
304100
800644
303350K
800887K
800900
702206K
800895K
303460K
506840K
800905
504605
508210
302310
702208K
800897K
702193K
801213
801213
800903K
800163K
304100
Part number
801215
302060K
800582K
800901
702206K
800894K
302200K
504593K
800410
504605
508210
302310
702208K
800897K
800904K
702193K
801213
800408
800903K
800163K
304100
801215
302060K
800582K
800901
702206K
800894K
302200K
510803
800410
504605
508210
302310
702208K
800897K
800904K
702193K
801213
800408
800903K
800163K
304100
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
15
Pump Selection Steps
1. Determine correct flow rate for optimum filtration,
sanitation and heater operation.
Based on a four hour turnover, use the following formula:
Required Flow Rate (lpm) = Pool Volume (litres) / 240
2. Determine suction head at that flow rate
¥ Static head
¥ Pipe friction
¥ Equipment loss - Main drains
- Skimmers
- Automatic cleaners (not usually
factored in at this stage)
If there is a suction lift (ie. static head - pipe friction equipment loss < 0), apply a capacity multiplier to
pump capacity:
Total suction head
Rated capacity%
1.5m
90
3.0m
80
4.6m
70
6.1m
60
Figure 1
Static Suction Lift
Suction
Head (metres)
Static Head
+
Pipe Friction
+
Equipment Loss
=
Total Suction
3. Determine delivery head at the required flow rate:
¥ Static head
¥ Pipe friction
¥ Equipment loss - Filter, multiport valve
- Heater, solar tubes
Total head
at required
- Returns
Pump
operating
point
flow rate
4. Determine total head
(delivery head + suction head)
5. Select the smallest pump that will meet the total
head requirement at the required flow rate.
Required
flow rate
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
16
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Flow (litres/minute)
Pump installation
Refer to owners manual for complete installation instruction.
Pentair Water recommend the pump be mounted on
a solid level, vibration free surface.
Common Problems - Air Lock
To maintain optimum performance from your pump,
the suction pipe should be:
• Kept to the shortest length possible – place the
pump as close to the water source as possible
• PVC or similar non-collapsible hose or pipe
• All fittings must be airtight
• Pipe should be equal to or larger than the diameter
of the suction port
• Where possible install the pump below water level
Air Lock
To maintain optimum performance from your pump,
the discharge pipe should be:
✘
• Kept to the shortest possible length
• Of adequate diameter to reduce friction losses –
avoid small pipes to maximise flow and pressure
performance
Pentair Water recommend the use of shut off valves in
suction & discharge pipe to assist when maintenance is
required. Closed loop systems or applications where the
pump is installed vertically higher than the water source
will require an additional check valve or footvalve.
Electrical
230 volt single phase motors are supplied as standard
with built-in thermal overload protection and are
designed to plug directly into a 10 amp domestic power
supply to local electrical authority specifications
(2.2kW,2.4kW - 15Amp Plug).
not recommended
Common Problems - Air in System
Allow 4 times the pipe
diameter between the
suction port and the
first fitting
Air in system
Fitting too close to
suction of pump
Caution: Pumps fitted with 415 volt three phase electric
motors must be wired through a contractor
incorporating quick trip type thermal overloads.
Direction of rotation must be checked by switching
power on momentarily and observing motor rotation.
If the direction is not correct as per motor label have a
qualified electrician make the change.
✘
not recommended
Recommended routine maintenance
• Check seal, if leaking replace with genuine Pentair Water service parts.
• Regularly check o-rings and replace if worn or leaking
• Keep strainer basket free of debris by checking it regularly.
Ensure that your self-priming pump is filled with water before operating.
NEVER run dry! Running pump dry may damage seals, causing leakage and flooding not covered
by Pentair Water warranty.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
17
Trouble Shooting
Symptom
Cause
No power supply.
Pump runs
intermittently.
Poor performance –
slow pool turnover,
or poor cleaning
performance.
Pump is leaking
water.
Ensure that pump is connected to a live outlet. Ensure that timeclock or
controller is delivering power to the pump.
Check fuses and circuit breakers.
Pump doesn’t start.
No water from
pump
(Pump runs or
hums, but delivers
no water).
Remedy
Defective capacitor.
Replace the capacitor (electrical license required).
Motor defective.
Check motor winding resistance against specification.
Pump is blocked.
Disconnect the pump from the power outlet, and check the pump housing
and discharge for foreign matter.
Pump is not primed.
Ensure that pump body and suction line are filled with water before starting.
Suction line is leaking.
Check the suction line for leaks, especially at joints.
Blockages in skimmer box or
suction line.
Check the skimmer box, and empty the leaf basket.
Valves closed.
Check all valves on the filter, pump, and outlets.
Pool level below skimmer box.
Top up the pool, so that there is at least 100mm of water above the
skimmer box entry.
Ambient temperature is too high thermal cutout is operating.
Turn pump off until ambient cools.
Water temperature is too high.
Ensure that water temperature limits are observed.
Voltage is outside allowable limits
(see specification).
Check voltage level being delivered, and correct where necessary.
Partially clogged leaf baskets.
Switch off the pump, and check both the skimmer box leaf basket and
the pump suction leaf basket.
Filter is blocked.
Check filter pressure gauge, and backwash or clean filter cartridge.
Suction line is leaking (allowing
air into the suction line).
Check that a vacuum hose is not above the water surface.
Check the suction line for leaks, especially at joints.
Pool is too far below the pump
(suction lift situation)
If the pump cannot be moved closer to the pool, a different pump
may be required.
Low voltage.
Check voltage at motor terminals, while the pump is running.
Pump is worn or damaged.
Replace worn components, and remove cause of abnormal wear.
Casing bolts are not sufficiently
tightened.
Tighten casing bolts.
Mechanical seal is worn.
Replace seal, and remove cause of abnormal wear.
Should problems persist, contact your nearest Pentair Water service agent.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
18
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pacific
Australia
Head Office
Pentair Water Australia Pty Ltd
Notting Hill Victoria, Australia
Tel: +61 3 9574 4000 Fax: +61 3 9574 4088
Email: Sales@pentairwater.com.au
www.pentairwater.com.au
Americas
Pentair, Inc.
Golden Valley, Minneapolis
Tel: +1 763 545 1730 Fax: +1 763 656 5400
www.pentair.com
Europe
Pentair Pumps S.p.A
Milan, Italy
Tel: +39 02/93.27.111 Fax: +39 02/93.59.51.54
www.pentairpumps.it
Asia
China
Pentair Water Shanghai
Shanghai, China
Tel: +86 21 5877 7088 Fax: +86 21 5879 8758
India
Pentair Water India Pvt. Ltd.
Goa, India
Tel: +91 832 288 3300 Fax: +91 832 288 3312
Pentair Water Australia Pty Ltd ACN 112 060 616
Pentair Water New Zealand Ltd ACN 157 6666
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.
© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.
Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
L300121A 0706
Pentair Water New Zealand Ltd
Penrose Auckland New Zealand
Tel: +64 9 579 6254 Fax: +64 9 579 6497
Email: auckland@pentairwater.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising