FlexPowerRM RA600 Series

FlexPowerRM RA600 Series
FlexPowerRM RA600 Series
600VA 25A/24V or 21A/28V
Multi Output 8/16/24 AC Rackmount
Surge-enhanced / Network-ready CCTV Power
DESCRIPTION
The RA600 series is a 24/28 VAC, 25/21 amp rackmount power system
with multiple power distribution outputs and the capability to remote power
reset up to two 8 output banks with the optional network connection. Ideal for
CCTV applications in retail, health care, gaming, entertainment, transportation,
government and educational facilities.
SurgeShield
The RA600 series delivers maximum flexibility for large multi-camera projects
by providing increased current capability and allowing the user to individually select either 24 or 28V AC across eight, sixteen, or twenty-four outputs.
Each output is fused at 3A and individually protected against electrical surges
or transients caused by lightning or power line disturbances (SurgeShield™).
Designed to fit neatly into standard video equipment racks, the streamlined
cabinetry and exceptional features combine to significantly reduce installation
and service costs.
DataLink
Features include removable terminal strips for field wiring, input and output
surge suppression, automotive blade fuses for improved reliability, a front
removable chassis face plate for serviceability and enclosed in a 16 gauge
galvanized steel 2U rack mount chassis.
SPECIFICATIONS
OVERVIEW
Parameter
RA600
Unit
¾¾Agency Listed CCTV / Access
Input Voltage
120
VAC
Input Power (nominal)
600
VA
Output Voltage
24 or 28
VAC
Output Current
25 or 21
Amps
¾¾FlexPower Feature Set
ŠŠ SurgeShield Individual output surge protection
ŠŠ VSelect Installer selectable 24 or 28 VAC output voltage
ŠŠ Reliability+ Full fault protection / fiberglass PCBs
ŠŠ GreenSmart RoHS compliant, lead free manufacturing
ŠŠ DataLink Network communication interface option
Continuous Power Outputs
8, 16, 24
5A/Output
0 – 49°
C
BTU Rating
204
BTU/Hr
2U Mechanical Dimensions
19.00"W x 3.5"H x 14"D
Weight
28 lb.
Operating Temperature
¾¾System Features
ŠŠ Individually protected power outputs
ŠŠ Enhanced input and output surge suppression
ŠŠ 24 or 28 VAC selectable per output by positional jumper
ŠŠ Illuminated master power switch with circuit breaker
ŠŠ Externally visible LED output indicators
ŠŠ Removable jumper for individual output disconnect
ŠŠ Maintains camera synchronization
ŠŠ Standard, 2U EIA 19" rack mount chassis
ŠŠ Front removable chassis face plate for serviceability
ŠŠ Removable terminal strips for field wiring
ŠŠ Automotive blade fuses for improved reliability
ŠŠ Removable 3 wire grounded AC line cord
ORDERING
Model No.
RA600-8
RA600-16
RA600-24
Description
24/28 VAC, 25A/21A, 8 outputs
24/28 VAC, 25A/21A, 16 outputs
24/28 VAC, 25A/21A, 24 outputs
¾¾Remote Control / Reporting option - patent pending
ŠŠ Enables network connectivity via LAN / WAN
ŠŠ Remote 8 port shutdown (two max)
ŠŠ Remote monitor cabinet temperature / system voltage
ŠŠ Email notification of system service / tamper switch activation
For DataLink network option add "N" suffix to part number
RA600-8N
RA600-16N
RA600-24N
¾¾Visual Indicators
ŠŠ AC input presence: Lighted AC switch
ŠŠ AC output presence: Green LED per output
¾¾Ten Year Warranty
APPLICATIONS
AGENCY LISTINGS
ŠŠ IP Cameras, Monochrome / Color cameras
ŠŠ PTZ's, Fiber Optic senders / receivers
ŠŠ Analog Cameras
March 2012
ŠŠ UL 2044, 2nd edition, current revision
ŠŠ UL 294
ŠŠ CSA C22.2 No. 1-98
1/2
www.lifesafetypower.com
RA600 Series AC Rackmount
FLEXPOWER ® STANDARD FEATURES
POWER DISTRIBUTION
¾¾3A fused per output
ŠŠ Fusing may be increased if desired by installer for greater power
capability - see manual for further information
PowerCom/PowerCom-USB LifeSafety Power’s proprietary software
interface for communication with FlexPower equipment through a
DATALINK or USB connection. PowerCom is used for power supply
monitoring, programming, and reporting.
¾¾Visual Indicators
ŠŠ DC Presence: Green LED per output
ŠŠ Fault Condition: Yellow LED per 8 output bank
The NL1 DATALINK network module enhances PowerCom's capability with
remote diagnostics, battery management, trouble / service email alerts via
LAN/WAN, and remote on/off reset control.
¾¾Removable terminals: accepts #12 to #24 AWG
NETWORK OPTION*
The DL1 USB cable and a computer laptop USB connection, enables
PowerCom-USB to be used by service personnel for onsite power supply
programming and system diagnostic evaluation.
Network Interface for Remote Control and Reporting
¾¾Enables network connectivity via LAN / WAN
¾¾Remote power cycle 8 bank output (two max)
VSelect One single switch for configuring the output between 24 and 28VAC
eliminates field errors and allows for the reduction and simplification of service
inventory by eliminating the necessity of stocking units in each voltage.
¾¾PowerCom software provides 24/7 power status monitoring of
ŠŠ System voltage
ŠŠ Cabinet temperature
Reliability+ All power supplies within the FlexPower system are fully fault
protected and feature fiberglass printed circuit boards rather than paperbased to protect the electronics from water and other corrosive elements
found in industrial settings. High efficiency power supply design promotes
low heat generation leading to a longer service life.
¾¾Network & email alerts for
ŠŠ Time-to-service reminders
ŠŠ Tamper switch activation
*For Network option add "N" suffix to part number
Note that network option is not field installable
GreenSmart All members of the FlexPower family are RoHs compliant,
lead-free, and meet the latest state, federal and European requirements for
energy efficiency.
DataLink - Smart Power Management Communication Interface
Monitor, program, control, and report key power supply functions by computer
or local/wide area network using a browser interface or LifeSafety Power's
PowerCom® remote management software.
Power supply network connection requires the optional NL1 network module.
G
RA Series - rear panel
A
1
B
OUTPUTS
2
3
A
B
A
B
A
A
B
A
B
A
4
B
A
B
A
5
B
OUTPUTS
6
7
A
B
A
B
A
A
B
A
B
A
8
B
17
A
B
OUTPUTS
18 19 20
A
B
A
B
A
B
21
A
B
OUTPUTS
22 23 24
A
B
A
B
A
B
AC Power
h No user serviceable parts inside
refer servicing to qualified service personnel
A
9
B
10
OUTPUTS
12
B
13
14
15
B
16
OUTPUTS
Important: All information, including illustrations, is believed to be reliable. Users, however, should
independently evaluate the suitability of each product for their particular application. LifeSafety Power
makes no warranties as to the accuracy or completeness of the information, and disclaims any liability
regarding its use. LifeSafety Power’s only obligations are those in the LifeSafety Power Standard Terms
and Conditions of Sale for this product, and in no case will LifeSafety Power or its distributors be liable
for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of
the product. Specifications are subject to change without notice. In addition, LifeSafety Power reserves
the right to make changes—without notification to Buyer—to processing or materials that do not affect
compliance with any applicable specification.
Worldwide Headquarters
LifeSafety Power, Inc.
49 Range Road
Windham, NH 03087 USA
Tel 888-LSP-BUY8
info@lifesafetypower.com
March 2012
11
© 2012 LifeSafety Power Inc. P01-2281A 03/12
10-100
Base-T
2/2
LifeSafety Power, FlexPower, DataLink, GreenSmart, FlexConnect, PowerCom, Reliability+, SureCharge, TruWatt, and VSelect are trademarks of LifeSafety Power Inc. or its affiliates.\
¾¾Eight, sixteen, or twenty-four power distribution outputs, individually
selectable for either 24 or 28V AC output.
SurgeShield Provides additional protection for each individual power output, leading to less down time due to electrical surges or transients caused
by lightning or power line disturbances on the external wiring.
www.lifesafetypower.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising