35XP-A Digital Multimeter Data Sheet
Data Sheet
35XP-A
Digital Multimeter
A compact, full-featured digital multimeter for plant
maintenance, HVAC, electrical and electronic applications.
■■ Temperature
No hassle
warranty
No waiting.
No shipping
charges.
measurement
Capability to 1000 °C/1832 °F
(Type K thermocouple included)
■■ 750 V AC/1000 V DC—highest
voltage rating in this class of
meter
■■ Capacitance for motor run/start
test
■■ 0.1 μA resolution for flame
sensor testing
■■ Frequency to 1 MHz
■■ Resistance to 40 MW
■■ Data Hold freezes display
■■ Magne-Grip™ holster
■■ VolTect™ non-contact voltage
detector
■■ Triple safety ratings
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
35XP-A
(note: $500 MSLP limit)
CAT
1000V
Amprobe® Test Tools
600V
300V
www.Amprobe.com
35XP-A Digital Multimeter
Data Sheet
General Specifications
Display Polarity Overrange Zero Low Battery Indication Auto Power Off Measurement Rate Operating Environment Storage Temperature Accuracy Temperature Coefficient Altitude Power Battery Life Dimensions (H x W x D) Weight Warranty 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999
Automatic, positive implied, negative polarity indication
(OL) or (-OL) is displayed
Automatic
The “M” is displayed when the battery voltage drops below the operating level
Approx. 10 minutes
2 times per second, nominal
0 °C to 50 °C at <70 % R.H.
-20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter
Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)
2000 m
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
150 hours typical with carbon-zinc, 300 hours typical with alkaline
155 mm x 72 mm x 32 mm
Approx. 400 g including battery
One-year
Specifications
Function Voltage
DC Volts
Ranges AC Volts (45 Hz to 500 Hz)
Ranges Resolution Input Impedance Overload Protection Current
DC Current
Ranges AC Current (45 Hz to 500 Hz)
Ranges Resolution Input Protection Burden Voltage Resistance Resolution Open Circuit Voltage Overload Protection Amprobe® Test Tools
Range Accuracy
400 mV, 4 V, 40 V, 400 V, 1000 V ± (0.5 % rdg + 1 dgt)
400 mV (45 Hz to 100 Hz) 4 V, 40 V, 400 V, 750 V 100 μV
400 mV: >100 MW; 4 V: 10 MW; 40 V to 1000 V: 9.1 MW
1000 V DC or 750 V AC RMS
± (1.5 % rdg + 5 dgts)
± (1.5 % rdg + 5 dgts)
400 μA, 4000 μA, 40 mA, 400 mA 2A
± (1.0 % rdg + 2 dgt)
± (2.0 % rdg + 3 dgts)
400 μA, 4000 μA, 40 mA, 400 mA ± (1.5 % rdg + 5 dgts)
2A
± (2.5 % rdg + 5 dgts)
0.1 μA
2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input
500 mV max. (2 V max. on 4 mA, 400 mA ranges)
400 W, 4 kW, 40 kW, 400 kW, 4 MW ± (1.0 % rdg + 4 dgts)
40 MW ± (2.0 % rdg + 5 dgts)
100 mW
-0.45 V DC typical, (-1.2 V DC on 400 W range)
1000 V DC or 750 V AC RMS
www.Amprobe.com
35XP-A Digital Multimeter
Data Sheet
Specifications, cont.
Function Range Accuracy
Capacitance 4 nF, 40 nF, 400 nF, 4 μF ± (5.0 % rdg + 30 dgts)
40 uF, 400 uF ± (5.0 % rdg + 5 dgts)
4 mF ± (5.0 % rdg + 15 dgts)
Resolution 1 pF
Test Voltage <1V
Test Frequency 1.3 Hz on 4 nF to 40 μF ranges, 0.7 Hz on 400 μF, 4 mF ranges
Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input
Temperature 400 °C, 1000 °C, 400 °F, 1832 °F
-20 °C to 10 °C ± (2.0 % rdg + 4 °C)
10 °C to 200 °C ± (1.0 % rdg + 3 °C)
200 °C to 1000 °C ± (3.0 % rdg + 2 °C)
-4 °F to 50 °F ± (2.0 % rdg + 8 °F)
50 °F to 400 °F ± (1.0 % rdg + 6 °F)
400 °F to 1832 °F ± (3.0 % rdg + 4 °F)
Resolution 0.1 °C, 0.1 °F
Overload Protection 1000 V DC or 750 V AC RMS
1000 V 600 V 300 V
Frequency 4 k, 40 k, 400 k, 1 M ± (0.1 % rdg + 3 dgts)
Resolution 1 Hz
Sensitivity 10 Hz to 1 MHz: >2.5 V rms
Minimum Pulse Width > 25 ns
Duty Cycle Limits > 30 % and < 70 %
Overload Protection 1000 V DC or 750 V AC RMS
Continuity
Audible Indication Less than 25 W
Response Time 100 ms
Overload Protection 1000 VDC or 750 VAC rms
Diode Test
Test Current 1.2 mA (approximate) ± (1.5 % rdg + 3 dgts)
Resolution 1 mV
Open Circuit Voltage 3.0 DC typical
Overload Protection 1000 V DC or 750 V AC RMS
Non-Contact Voltage Indicator
Sense voltage 70 V to 600 V AC beeper chirps and big bright red LED comes on, works on all ranges
www.Amprobe.com
Data Sheet
35XP-A Digital Multimeter
Included Accessories
Pair of test leads (TL245A), K-type thermocouple (TP255A), temperature adapter (XR-TA),
fuse 2 A/ 1000 V (P/N FP200), 9 V battery (installed), Magne-Grip™ Holster with magnetic
hanging strap (H2-XR) and users manual.
Optional Accessories
VC30A Carrying Case
DL243D Test Lead Kit
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
tel: 877-AMPROBE
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2007 Amprobe Test Tools. All rights reserved.
9/2007 2123441 D-US-N Rev C
Amprobe® Test Tools
www.Amprobe.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising