OneTouch 4.0 Quick Start Guide
OneTouch 4.0 Quick Start Guide
OneTouch 4.0 provides a quick and easy way to scan documents using preset scan settings then send the scan to a
destination application like PaperPort, Paint or Word. Each of the nine buttons can have their own unique settings.
Configuring OneTouch 4.0
1. Open the OneTouch properties
a. Option 1 (see figure 1)
i. Hold down the button on the scanner you want to configure.
b. Option 2 (see figure 2)
i. Left click on the OneTouch icon in the system tray (by the
Windows clock).
ii. In the OneTouch panel, right click on a button to configure it.
c. Note: Once the properties window is open, select the tab
corresponding to the button you want to change. (see figure 3 step 1)
2. Select a Destination Application (see figure 3)
a. From the list on the left, select which application should receive
the scanned image. (see figure 3 step 2)
b. If the desired application is not listed:
i. Click on the “Options” tab and select “Show all destinations”.
ii. Click back on the tab you were are modifying.
iii. All applications detected by OneTouch will now be listed.
c. Common destinations are:
• PaperPort – Easily view and manage scanned documents.
• Transfer to Storage – The scan is simply saved on the hard
drive, no application is opened.
• Email – A blank email is opened with the scan attached.
• Word – The scan is automatically converted to a text document
then opened in Microsoft Word (Requires OmniPage).
3. If “PaperPort” or “Transfer to Storage” is the selected destination,
choose where the scan will be saved
a. For PaperPort:
i. Click on “Properties”. (see figure 3 step 3)
ii. Select where the scanned document will be saved.
iii. Note: If the desired folder is not listed, it will need to be added
to PaperPort first. Open PaperPort, click “Tools” then “Folder
Manager” (or “PaperPort Folders”) and add the folder.
b. For Transfer to Storage:
i. By default, scans will be saved in ‘My Documents’ under a
folder called ‘My OneTouch Archive’.
ii. The destination folder can be changed in the scan
configuration properties. See step 6 for more information.
iii. Note: If the folder is changed using the “Properties” button, it
will be changed for all 5 scan buttons.
4. Select a File Type (see figure 3 step 4)
a. In the upper right corner, select the desired file type.
b. Right click on a file type to select advanced options.
c. Commonly used file types are:
• JPG – ideal for pictures; does not support multiple pages.
• PDF – best for documents; supports multiple pages.
• sPDF – or Searchable PDF, gives the ability to search for text
within a scanned document.
d. Note: The selected destination application determines which file
types are available (e.g. Paint can only open BMP and JPG files).
Figure 1 – OneTouch Buttons on Scanner
Press to start a scan
Hold to open the scan
Properties
*Button configuration will vary by
product model
Figure 2 – OneTouch System Tray Icon
2. Left Click to start a scan
Right Click to configure
1. Click to open OneTouch panel
Figure 3 – OneTouch Properties
1. Select a button to configure
4. Select a file type
3. For PaperPort only, click to
select where the scan is saved.
2. Select a destination application
OneTouch 4.0 Quick Start Guide Cont’d
5. Select a Scan Configuration from the list on the right (see figure 4 step 1)
6. To customize the scan settings
a. Option 1: Modify an existing configuration.
i. Select a configuration from the list on the right. (see figure 4 step 1)
ii. Click the ‘Edit’ button. (see figure 4 step 3)
iii. To the far right of the configuration’s name, click on the ‘lock’ to
change it into a ‘key’. (see figure 5 step 1)
b. Option 2: Create a new configuration.
i. Click on the ‘New’ button. (see figure 4 step 2)
c. Use the tabs to access the various settings. (see figure 5 step 2)
i. Storage Options – If ‘Transfer to Storage’ is the destination,
use this tab to configure where the scan is saved. (see figure 6)
ii. For information about the different settings, see the user guide.
d. Common scan settings are:
i. Text Document – Black and White at 200 – 300 dpi.
ii. Document with Images – Grayscale at 200 – 300 dpi.
iii. Pictures – Color at 300 – 400 dpi.
Figure 4 – Selecting Scan Settings
1. Select a scan configuration
2. Click to create a
new configuration
3. Click to edit a configuration
7. Click OK to close the OneTouch 4.0 properties.
Scanning With OneTouch
1. Load the paper by placing the document on the scanner glass face
down with the corner aligned to the reference mark. (see figure 7)
2. Start the scan using one of the following
a. To start the scan from the scanner (see figure 1)
i. Press the button on the scanner.
b. To start the scan from the computer (see figure 2)
i. Click on the OneTouch icon in the system tray (by the
Windows clock) to bring up the OneTouch panel.
ii. Click on the desired button to start the scan.
Figure 5 – Scan Configuration Properties
1. Click to unlock configuration
2. Click tabs to display
different scan options
FAQ
Q1: How do I unlock a configuration?
A1: In the ‘Scan Configuration Properties’ window, click on the “Scan
Settings” tab then click on the lock to the far right of the
configuration’s name. See step 6a.
Q2: How do I scan to multiple folders with Transfer to Storage? When I
change the folder for one button, it changes it for all the buttons.
A2: If you change the folder using the “Properties” button, it will change it
for ALL buttons. To set a different location for each button, use the
scan configuration properties. See step 6.
Q3: When PaperPort is selected as my destination and I click on
‘Properties’, the folder I want to scan to is not listed.
Figure 7 – Loading Paper
The location of the
reference mark will
vary based on the
specific scanner
model
Reference Mark
A3: Before a folder will be listed in the properties for PaperPort, it must
be added to PaperPort first. Open PaperPort then go to “Tools” and
“Folder Manager” (or “PaperPort Folders”) and add the folder.
Q4: How do I scan slides or negatives using OneTouch?
A4: To scan slides, select ‘Configure Before Scan’ as your configuration
(see figure 4 step 3) or scan in another program like PaperPort or Paint
Shop. Once the TWAIN interface opens, select ‘Scan 35mm Using’
or ‘Scan Negative Using’ from the drop-down menu in the upper left.
Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising