Eizo | S2232WE-GY | User`s manual | Eizo S2232WE-GY

Eizo S2232WE-GY
Important
Please read PRECAUTIONS, this User’s Manual and Setup Guide
(separate volume) carefully to familiarize yourself with safe and effective
usage.
• Please read the Setup Guide (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.eizo.com
[Location of Caution Statement]
Ex. Height adjustable stand
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Product specification may vary with sales areas.
Confirm the specification in the manual written in language of the region of purchase.
Copyright© 2009 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
VESA is a registered trademark or a trademark of Video Electronics Standards Association in the United States and other countries.
Windows and Windows Vista are registered trademarks of Microsoft Corporation.
FlexScan, ScreenManager, i•Sound and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other
countries.
Notice for this monitor
This product is suited to creating documents, viewing multimedia content, and other general purposes.
This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used
outside the region, it may not operate as specified in the specifications.
This product may not be covered by warranty for uses other than those described in this manual.
The specifications noted in this manual are only applicable for power cords and signal cables specified by us.
Use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
(Refer to “Cleaning” on the next page.)
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage
the cabinet or LCD panel.
NOTE
• Optional ScreenCleaner is recommended for cleaning the panel surface.
[LCD Panel]
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
• Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a
dry cloth for better finishing.
[Cabinet]
Clean the cabinet with a soft cloth dampened with a little mild detergent.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
CONTENTS
Notice for this monitor............................................... 3
● To adjust brightness of non-display area
[Border Intensity]............................................... 23
CONTENTS.............................................................. 5
Chapter 1 Features and Overview...................... 7
2-11 Setting Adjustment Menu Display................. 24
● To update menu settings [Menu Size/
Menu Position/Menu Off Timer/Translucent]..... 24
1-1 Features............................................................. 7
2-12 Setting Orientation......................................... 25
1-2 Controls and Functions................................... 8
● To set the orientation of the Adjustment menu
[Orientation]....................................................... 25
1-3 Compatible Resolutions/Frequencies............ 9
2-13 Locking Buttons............................................. 25
1-4 Functions and Basic Operation..................... 10
Chapter 2 Settings and Adjustments............... 13
2-14 Displaying Monitor Infomation [Information].................................................... 25
2-15 Enabling/Disabling DDC/CI communication... 26
2-1 Utility Disk....................................................... 13
● Disk contents and software overview................ 13
● To use ScreenManager Pro for LCD................. 13
2-16 Setting Power Indicator ON/OFF [Power Indicator]............................................ 26
2-2 Screen Adjustment......................................... 14
2-17 Setting Language [Language]....................... 26
Digital Input........................................................... 14
2-18 Setting EIZO logo display ON/OFF................ 26
Analog Input......................................................... 14
2-19 Resuming the Default Setting [Reset].......... 27
2-3 Color Adjustment............................................ 17
● To select the display mode (FineContrast mode).... 17
● To perform advanced adjustments.................... 18
● To reset color adjustment values....................... 27
● To reset all adjustments to the factory default
settings.............................................................. 27
● Adjustment items in each mode........................ 18
● To adjust the brightness [Brightness]................ 18
Chapter 3 Connecting Cables........................... 28
● To adjust the contrast [Contrast]........................ 18
● To adjust the color temperature [Temperature].... 19
● To adjust the gamma value [Gamma]................ 19
● To adjust the color saturation [Saturation]......... 19
● To adjust the hue [Hue]..................................... 20
3-1 Connecting Two PCs to the Monitor............. 28
● To switch the input signal.................................. 28
● To set input signal selection [Input Signal]........ 29
● To adjust the gain value [Gain].......................... 20
3-2 Adjusting the DVI Input Level [DVI Input Level]............................................. 29
2-4 Adjusting Volume [Volume]........................... 20
3-3 Connecting Peripheral USB Devices................ 30
2-5 Turning off the audio output at Power Saving
mode [Power Save]......................................... 20
Chapter 4 Troubleshooting................................ 31
2-6 Setting On/Off for the automatic brightness
adjustment function [Auto EcoView]............ 21
2-7 Setting On/Off for Power Saving mode [Power Save]................................................... 21
2-8 Turning off the monitor automatically [Off Timer]....................................................... 22
2-9 Displaying the level of power saving by
EcoView Index................................................. 22
2-10 Screen Size Selection..................................... 23
● To change screen size [Screen Size]................ 23
CONTENTS
CONTENTS
Chapter 5 Reference.......................................... 34
5-1 Attaching an Arm............................................ 34
5-2 Folding the EZ-UP stand................................ 35
5-3 Specifications................................................. 36
5-4 Glossary.......................................................... 45
5-5 Preset Timing.................................................. 47
TCO’03
. .......................................................... 48
FCC Declaration of Conformity........................... 49
Hinweise zur Auswahl des richtigen Schwenkarms
für Ihren Monitor................................................... 50
Hinweis zur Ergonomie........................................ 50
CONTENTS
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 22” wide format LCD Applicable to WSXGA+ (1680×1050) (S2232W)/
22” wide format LCD Applicable to WUXGA (1920×1200) (S2242W)/
24” wide format LCD Applicable to WUXGA (1920×1200) (S2432W)
• Built-in speakers and headphone jack
1-2 “Controls and Functions” (page 8)
• Power saving function
Suppressing the power consumption* reduces the carbon dioxide emissions.
This product is equipped with various power saving functions.
– Power Consumption when main power switch is Off: 0W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
– Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically
and comfortably.
Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing the excessively
high brightness will be helpful to reduce the power consumption and the damage to your eyes.
2-6 “Setting On/Off for the automatic brightness adjustment function [Auto EcoView]” (page 21)
– EcoView Index function
The green indicator shows the power consumption ratio responding to the brightness of the monitor. You can realize the power
consumption reduction by taking consideration in the ratio of power saving.
2-9 “Displaying the level of power saving by EcoView Index” (page 22)
• FineContrast function
2-3 “To select the display mode (FineContrast mode)” (page 17)
• Applicable to DVI long cable
3-2 “Adjusting the DVI Input Level [DVI Input Level]” (page 29)
• Portrait/Landscape display available
• The software “ScreenManager Pro for LCD” to adjust the screen using the mouse and keyboard is included
2-1 “Utility Disk” (page 13)
• HDCP (High-bandwidth Digital Content Interface)
* Reference values:
– S2232W
Maximum power consumption: 80W (Luminance Max., at default settings)
Standard power consumption: 32W (Luminance 120cd/m2, at default settings)
– S2242W
Maximum power consumption: 80W (Luminance Max., at default settings)
Standard power consumption: 36W (Luminance 120cd/m2, at default settings)
– S2432W
Maximum power consumption: 90W (Luminance Max., at default settings)
Standard power consumption: 40W (Luminance 120cd/m2, at default settings)
NOTE
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position. (Refer to “To set the orientation of the Adjustment menu [Orientation]”
on page 25.)
• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor
with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC. Refer to the manual of
the graphics board for details.
• The stand of the unit can be replaced with an arm or another stand. (Refer to “5-1 Attaching an Arm” on page 34.)
Chapter 1 Features and Overview
1-2 Controls and Functions
Ex. Height adjustable stand
16
17
Adjustment menu
(*ScreenManager ®)
3
4
20
1
2
5
6
7
1
2
3
4
Sensor
Auto EcoView button
EcoView Index button
Input Signal Selection button
5
6
Mode button
Enter button
7
Control buttons (Left, Down,
Up, Right)
8
9
Power button
Power indicator
10
11
12
13
14
Speaker
Main Power Switch
Power connector
Stereo mini jack
Input signal connectors
15
USB port (Up)
16
17
18
19
20
21
USB Port (Down)
Stand
Cable holder
Headphone jack
Security lock slot
Option speaker (i·Sound L3)
mounting holes
8 9
10 11 12
Chapter 1 Features and Overview
13 14 15
19
Detects ambient brightness. Auto EcoView function (page 21).
Allows you to switch the Auto EcoView function On or Off (page 21).
Displays the EcoView index (page 22).
Switches input signals for display when two PCs are connected to the
monitor (page 28).
Allows you to switch the display mode (page 17).
Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted (page 12).
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 12).
•
or
button: Displays the volume adjustment menu (page 10).
•
or
button: Displays the brightness adjustment menu (page 10).
Turns the power on or off.
Indicates monitor’s operation status.
Blue: Operating
Orange: Power saving
Off: Power off
Outputs audio source.
Turns the main power on or off.
Connects the power connector.
Connects the stereo mini jack cable.
Left : DVI-D Connector / Right : D-Sub mini 15-pin connector
Connects the USB cable to use the software that needs USB connection, or
to use USB Hub function. (page 30)
Connects a peripheral USB device.
Used to adjust the height and angle of the monitor screen.
Covers the monitor cables.
Connects the headphones.
Complies with Kensington’s MicroSaver security system.
Used to attach the option speaker (i·Sound L3). (May not allowed to attach
the option speaker depending on the stand type.)
* ScreenManager ® is an EIZO’s nickname of the Adjustment menu. See page 10 for how to use.
18
21
1-3 Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
Analog Input
Resolution
640 × 480
720 × 400
800 × 600
1024 × 768
1152 × 864
1280 × 960
1280 × 1024
1600 × 1200
*1 *2 1680 × 1050
*1 *3 1920 × 1200
Frequency
Mode
~75 Hz
70 Hz
~75 Hz
~75 Hz
75 Hz
60 Hz
~75 Hz
~75 Hz
60 Hz
60 Hz
VGA, VESA
VGA TEXT
VESA
VESA
VESA
VESA
VESA
VESA
VESA CVT, VESA CVT RB
VESA CVT, VESA CVT RB
Frequency
Mode
60 Hz
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
VGA
VGA TEXT
VESA
VESA
VESA
VESA
VESA
VESA CVT
VESA CVT RB
VESA CVT RB
S2232W
Dot Clock ~150MHz
√
√
√
√
√
√
√
–
√
–
S2242W/S2432W
Dot Clock ~202.5MHz
√
√
√
√
√
√
√
√
√
√
S2232W
Dot Clock ~120MHz
√
√
√
√
√
√
–
–
√
–
S2242W/S2432W
Dot Clock ~162MHz
√
√
√
√
√
√
√
√
√
√
Digital Input
Resolution
640 × 480
720 × 400
800 × 600
1024 × 768
1280 × 960
1280 × 1024
1600 × 1200
*1 1680 × 1050
*1 *2 1680 × 1050
*1 *3 1920 × 1200
*1 When displaying the wide format input signal, a graphics board in conformance with VESA CVT standard is required.
*2 Recommended resolution (S2232W: Set this resolution)
*3 Recommended resolution (S2242W/S2432W: Set this resolution)
Chapter 1 Features and Overview
1-4 Functions and Basic Operation
To adjust the screen and color
Main menu (Refer to page 12 for operation)
Analog input only
[At analog signal input]
1
[At digital signal input]
● To adjust flickering and position
[Screen]………………………………… see page 14
● To adjust color gradation automatically
[Range]………………………………… see page 16
2
Screen Adjustment
(Automatic Adjustment)
Screen Adjustment
(Advanced Adjustment)
[At analog signal input]
Page 14
Page 15
[At digital signal input]
• The Adjustment menu and the FineContrast mode
name cannot be displayed at the same time.
FineContrast mode
Page 17
Color Adjustment
Simple Adjustment [FineContrast mode]
This function allows easy selection of a desired mode
from five modes according to monitor application.
● To eliminate vertical bars [Clock*]…… see page 15
● To remove flickering or blurring
[Phase*]………………………………… see page 15
● To correct screen position
[Position*] ……………………………… see page 16
● To modify blurred characters/lines
[Smoothing]… ………………………… see page 16
● To set when a noise appears on the screen
[Signal Filter*]… ……………………… see page 32
*
● To adjust the brightness [Brightness]
Press
or
to adjust brightness.
Items marked with * can be adjusted with analog
input.
Color Adjustment
Advanced Adjustment
Page 18
● Adjusting Volume [Volume]
Press
or
to adjust volume.
● Setting On/Off for the automatic brightness
adjustment function [Auto EcoView]
Press
to switch the setting.
● Displaying the level of power saving by EcoView
Index
Press
to display the level of power saving mode.
10
Chapter 1 Features and Overview
● “Brightness”, “Contrast”, “Temperature”,
“Gamma”, “Saturation”, “Hue” and “Gain” can be
set for each mode (Custom/sRGB/Text/Picture/
Movie).
Settable functions vary with the FineContrast
mode.
Resuming the default settings
● To reset color adjustment values
[Reset]… ……………………………… see page 27
To make useful settings/adjustments
Adjustment menu (Refer to page 12 for operation)
[At analog signal input]
Power-save Settings
● Setting On/Off for Power Saving mode
[Power Save] … ………………………see page 21
● Turning off the monitor automatically
[Off Timer] … …………………………see page 22
● Displaying the level of power saving by EcoView
Index [EcoView Index]… ……………see page 22
[At digital signal input]
Other Settings
Information
Page 25
● Displaying Monitor Infomation [Information]
Language
Page 26
● To change screen size [Screen Size]
… ……………………………………… see page 23
● To adjust brightness of non-display area
[Border Intensity]……………………… see page 23
● To set input signal selection
[Input Signal]… ……………………… see page 29
● To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Translucent]…………………………… see page 24
● To set the orientation of the Adjustment menu
[Orientation]…………………………… see page 25
● Setting Power Indicator ON/OFF
[Power Indicator]……………………… see page 26
● To reset all adjustments to the factory default
settings [Reset]… …………………… see page 27
Sound Settings
● Setting Language [Language]
● Locking Buttons… ……………………… see page 25
● Enabling/Disabling DDC/CI communication
[DDC/CI]… ……………………………… see page 26
● Setting EIZO logo display ON/OFF… … see page 26
● Adjusting the DVI Input Level
[DVI Input Level]… ……………………… see page 29
● Adjusting Volume [Volume]…………… see page 20
● Turning off the audio output at Power Saving
mode [Power Save]…………………… see page 20
Chapter 1 Features and Overview
11
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
. The Main menu appears.
(1) Press
(2) Select a function with
/
/
/
, and press
. The Sub menu appears.
(3) Select a function with
/
/
/
, and press
. The adjustment/setting menu appears.
(4) Adjust the selected item with
/
/
/
, and press
. The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the Sub menu and press
(2) Choose <Exit> from the Main menu and press
. The Main menu appears.
. The Adjustment menu quits.
NOTE
• The Adjustment menu can also be exited by pressing
• <Exit> or <Return> can also be selected by pressing
12
Chapter 1 Features and Overview
twice quickly.
twice in the Main menu or Sub menu.
Chapter 2 Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the software programs.
● Disk contents and software overview
The disk includes software programs for adjustment, and User's Manual. Refer to “Readme.txt” or the “read me” file on
the disk for software startup procedures or file access procedures.
Item
Overview
OS
A “Readme.txt” or “read me” file
Screen Adjustment Utility
Monitor pattern display software used
when adjusting the image of the analog
input signal manually.
Windows 2000/XP/Vista
Screen adjustment pattern files
Used when adjusting the image of
the analog signal input manually. If
the Screen Adjustment Utility is not
applicable to your PC, use this pattern
files to adjust the image.
Windows
* If your OS is other than Windows,
download the pattern files from our
site: http://www.eizo.com
ScreenManager Pro for LCD
A software for adjusting the screen using Windows XP/Vista
the mouse and keyboard.
Connect the monitor to the PC with the
supplied USB cable before installation.
Regarding the adjustable items, refer to
the "Parameter Adjustment Items".
* WindowMovie Checker Software
WindowMovie is a function of
ScreenManager Pro for LCD. For more
information, refer to the User’s Manual
of ScreenManager Pro for LCD on the
disk.
ScreenManager Pro for LCD
(DDC/CI)
A software for adjusting the screen using Windows Vista
the mouse and keyboard.
It differs from the ScreenManager Pro
for LCD in that it does not need the
USB cable connection although some
functions are not implemented.
EIZO ScreenSlicer
A software that divides a screen and
lays out multiple windows efficiently.
Windows XP/Vista
User’s Manual of this monitor (PDF file)
● To use ScreenManager Pro for LCD
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable.
For more information, refer to the “Chapter 3 3-3 Connecting Peripheral USB Devices” (page 30).
NOTE
• ScreenManager Pro for LCD and ScreenManager Pro for LCD (DDC/CI) cannot be installed at the same time.
Chapter 2 Settings and Adjustments
13
2-2 Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 “To modify blurred characters/lines [Smoothing]”. When performing
more advanced adjustment, see “2-3 Color Adjustment” (page 17) and
subsequent pages.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
• Auto adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).
The auto adjust function works in the following cases:
• When a signal is input into the monitor for the first time
• When the resolution or Vertical/Horizontal Frequency not
displayed before is set
If the screen is not displayed correctly even after performing the auto
adjustment, perform the screen adjustments according to the procedures on the
following pages to use the monitor comfortably.
[Adjustment Procedure]
1 Perform the auto adjustment.
Attention
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(2) Choose <Execute> with
or
, and press
.
Flickering, screen position, and screen size are corrected by the autoadjustment function.
If the screen is not displayed correctly even after adjusting in step
1 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 “To adjust color gradation automatically [Range]”.
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (command prompt window,
for example) or when a black
background (wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
2 Prepare the display pattern for the analog display adjustment.
■ For Windows PC
Load the "EIZO LCD Utility Disk" to your PC, and then start the
"Screen Adjustment Utility" from the start menu.
If it cannot be started, open the screen adjustment pattern files.
■ For other than Windows PC
Download the "Screen adjustment pattern files" from our site: http://
www.eizo.com
14
Chapter 2 Settings and Adjustments
NOTE
• For how to open and contents of
the screen adjustment pattern files,
refer to “Readme.txt”. When using
the OS except Windows, refer to the
downloaded “read me” file.
the auto adjustment again with the analog screen
3 Perform
adjustment pattern displayed.
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Display Pattern 1 in full screen on the monitor using the “Screen
Adjustment Utility” or the screen adjustment pattern files.
(2) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(3) Choose <Execute> with
or
.
, and press
Flickering, screen position, and screen size are corrected by the autoadjustment function.
If the screen is not displayed correctly even after adjusting in step
3 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 “To adjust color gradation automatically [Range]”.
advanced adjustments for the following using the
4 Perform
<Screen> menu of the Adjustment menu.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
(2) Adjust the clock with
or
, and press
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
.
The adjustment is completed.
● To remove flickering or blurring [Phase]
Adjustable range: 0 to 63
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
or
The adjustment is completed.
, and press
.
Attention
.
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock]”.
(Clock → Phase → Position)
Chapter 2 Settings and Adjustments
15
● To correct screen position [Position]
(1) Choose <Position> from the <Screen> menu, and press
NOTE
.
The <Position> menu appears.
(2) Adjust the position with
/
/
/
to display the image
properly in the display area of the monitor, and press
The adjustment is completed.
• Since the number of pixels and the
pixel positions are fixed on the LCD
monitor, only one position is provided
to display images correctly. The
position adjustment is made to shift
an image to the correct position.
5 Adjust the color gradation.
● To adjust color gradation automatically [Range]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the “Screen
Adjustment Utility” or the screen adjustment pattern files.
(2) Choose <Range> from the <Auto Adjustment> menu, and press
.
(3) Choose “Execute” with
or
, and press
.
The output range is adjusted automatically.
(4) Close the Pattern 2. When using the “Screen Adjustment Utility”,
close the program.
6 Modify blurred characters or lines.
● To modify blurred characters/lines [Smoothing]
When a image is displayed with a resolution other than the
recommendation, the characters or lines of the displayed image may be
blurred.
Adjustable range: 1 to 5
(1) Choose <Screen> from the Adjustment menu, and press
.
(2) Choose <Smoothing> from the <Screen> menu, and press
.
The <Smoothing> menu appears.
(3) Adjust the characters/lines with
The adjustment is completed.
16
Chapter 2 Settings and Adjustments
or
, and press
.
Attention
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
2-3 Color Adjustment
● To select the display mode (FineContrast mode)
FineContrast allows you to select the best display mode easily according to the
monitor’s application.
FineContrast mode
Mode
Purpose
Custom
Available to change all setting values.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
Text
Suitable for displaying texts for word processing or
spreadsheets.
Picture
Suitable for displaying images such as photos or picture
images.
Movie
Suitable for playing back animated images.
Displays the
current mode.
(1) Press
.
NOTE
The FineContrast mode name appears at the lower left of the screen.
(2) One of five modes is displayed in turn each time
Custom
sRGB
Text
Picture
is pressed.
Movie
• The Adjustment menu and the
FineContrast mode name cannot be
displayed at the same time.
• “ScreenManager Pro for LCD”
allows you to select the FineContrast
mode automatically according to the
application used.
(Refer to “Chapter 3 Auto
FineContrast” on the User’s Manual
for “ScreenManager Pro for LCD”.)
Chapter 2 Settings and Adjustments
17
● To perform advanced adjustments
Attention
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● Adjustment items in each mode
According to the FineContrast mode selected, the adjustable function differs.
√ : Adjustment available −: Invalid for adjustment
Icon
Function
FineContrast mode
Custom
sRGB
Text
Picture
Movie
Brightness
√
√
√
√
√
Contrast
√
√
√
√
Temperature
√
√
√
√
Gamma
√
Saturation
√
Hue
√
Gain
√
−
−
−
−
−
−
Reset
√
√
√
−
−
√
√
√
√
√
√
−
−
−
√
√
√
● To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight
(Light source from the LCD back panel).
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Brightness> from the <Color> menu, and press
.
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Perform the range adjustment first
when adjusting color for analog input
signals.
(Refer to “To adjust color gradation
automatically [Range]” on page 16).
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
NOTE
• The values shown in “%” or “K” are
available only as reference.
• Using the “ScreenManager Pro for
LCD” allows you to perform the color
adjustment by using the mouse and
keyboard of your PC. The adjusted
status can be registered as a color data
and restore the data later. (Refer to
“Chapter 4 Color Adjustment” on the
User’s Manual for “ScreenManager
Pro for LCD”.)
NOTE
• You can also adjust the brightness
by pressing
or
without
displaying the adjustment menu.
The <Brightness> adjustment menu appears.
(3) Adjust the brightness with
or
.
, and press
The adjustment is completed.
● To adjust the contrast [Contrast]
NOTE
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Contrast> from the <Color> menu, and press
The <Contrast> adjustment menu appears.
(3) Adjust the contrast with
or
, and press
The adjustment is completed.
18
Chapter 2 Settings and Adjustments
.
.
.
• In the contrast of 50%, every color
gradation is displayed.
• When adjusting the monitor, it
is recommended to perform the
brightness adjustment which may
not lose the gradation characteristics,
prior to the contrast adjustment.
Perform the contrast adjustment in the
following cases.
–When you feel the image is dark
even if the brightness is set to
100%. (Set the contrast to higher
than 50%).
–When you feel the image is bright
even if the brightness is set to 0%.
(Set the contrast to lower than
50%).
● To adjust the color temperature [Temperature]
NOTE
The color temperature can be adjusted. The color temperature is normally used
to express the hue of “White” and/or “Black” by a numerical value. The value
is expressed in degrees “K” (Kelvin).
In the same way as the flame temperature, the image on the monitor is displayed
reddish if the color temperature is low and is bluish if the color temperature is
high. The gain preset values are set for each color temperature setting value.
5000K
The white color image is displayed reddish. The 5000K or 6000K
is usually used in the printing industry.
6500K
The white color image is displayed in warm white like paper white.
The temperature is suitable to display photographs or video
images.
9300K
The white color image is displayed slightly bluish white.
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
• [Gain] allows you to perform more
advanced adjustment (See “To adjust
the gain value” on page 20).
• If you set to [Off], the image is
displayed in the preset color of the
monitor (Gain: 100% for each RGB).
• When changing the gain value, the
color temperature adjusting range is
changed to “Off”.
Adjustable range: Off, 4000K-10000K (specified by every 500K unit,
including 9300K)
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Temperature> from the <Color> menu, and press
.
The <Temperature> adjustment menu appears.
(3) Adjust the color temperature with
or
.
, and press
The adjustment is completed.
● To adjust the gamma value [Gamma]
NOTE
The gamma value can be adjusted. The luminance of the monitor varies
depending on the input signal, however, the variation rate is not proportional to
the input signal. To keep the balance between the input signal and the luminance
of the monitor is called as “Gamma correction”.
Adjustable range: 1.8, 2.0, 2.2
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Gamma> from the <Color> menu, and press
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
.
.
The <Gamma> adjustment menu appears.
(3) Adjust the gamma value with
or
, and press
.
The adjustment is completed.
● To adjust the color saturation [Saturation]
Attention
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -128 to 127
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Saturation> from the <Color> menu, and press
.
The <Saturation> adjustment menu appears.
(3) Adjust the saturation of the color with
The adjustment is completed.
or
, and press
.
• This function does not enable to
display every color gradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
• Setting the minimum (-128) turns the
image to a monochrome screen.
Chapter 2 Settings and Adjustments
19
● To adjust the hue [Hue]
Attention
This function allows you to adjust the hue. If you set the hue to a high value,
the image turns greenish. If low, the image turns purplish.
Adjustable range: -32 to 32
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Hue> from the <Color> menu, and press
.
.
The <Hue> adjustment menu appears.
(3) Adjust the hue with
or
, and press
.
• This function does not enable to
display every color gradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
The adjustment is completed.
● To adjust the gain value [Gain]
Attention
Each luminance of red/green/blue composing the color is called “Gain”. The
gain adjustment may change the color tone of the “White” (when the max input
signal for each color is obtained)
Adjustable range: 0 to 100%
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Gain> from the <Color> menu, and press
.
.
The <Gain> adjustment menu appears.
(3) Adjust the respective value of Red, Green or Blue with
.
or
, and press
The adjustment is completed.
2-4 Adjusting Volume [Volume]
NOTE
.
.
The volume adjustment menu appears.
(3) Adjust the volume with
or
, and press
.
The adjustment is completed.
2-5 Turning off the audio output at Power
Saving mode [Power Save]
This monitor allows you to turn off the audio output from the speakers/
headphone at the power saving mode.
(1) Choose <Sound> from the Adjustment menu, and press
.
(2) Choose <Power Save> from the <Sound> menu, and press
The <Power Save> setting menu appears.
(3) Select “On” or “Off” with
or
, and press
The setting is completed.
20
Chapter 2 Settings and Adjustments
.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
the FineContrast mode selected. (See
“Adjustment items in each mode” on
page 18.)
• The gain value may change depending
on the value of the color temperature.
• When changing the gain value, the
color temperature adjusting range is
changed to “Off”.
• You can also adjust volume by
pressing
or
without
displaying the adjustment menu.
This function allows you to adjust volume up or down.
Adjustable range: 0 to 20
(1) Choose <Sound> from the Adjustment menu, and press
(2) Choose <Volume> from the <Sound> menu, and press
• This function does not enable to
display every color gradation.
.
NOTE
2-6 Setting On/Off for the automatic
brightness adjustment function [Auto EcoView]
• Be careful not to block the sensor on
the lower side of the monitor when
using the Auto EcoView function.
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoView function.
(1) Press
.
The <Auto EcoView> setting menu appears.
(2) The On/Off setting is toggled by pressing
.
2-7 Setting On/Off for Power Saving mode
[Power Save]
This function allows you to set the monitor into the power saving mode
according to the PC status.
(1) Choose <PowerManager> from the Adjustment menu, and press
.
(2) Choose <Power Save> from the <PowerManager> menu, and press
.
The <Power Save> setting menu appears.
(3) Select “On” or “Off” with
or
.
, and press
The setting is completed.
■Analog input
Attention
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC
Monitor
Operating
Power saving
STAND-BY
SUSPENDED
OFF
Power
Indicator
Operating
Blue
Power saving
Orange
■Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Operating
Power saving
Monitor
Operating
Power saving
• Turning off the main power switch
or unplugging the power cord
completely shuts off power supply to
the monitor.
• Devices connected to the USB port
(upstream and downstream) work
when the monitor is in power saving
mode or when the power button of
the monitor is Off. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.
• Power consumption varies even
when the stereo mini jack cable is
connected.
Power Indicator
Blue
Orange
Chapter 2 Settings and Adjustments
21
2-8 Turning off the monitor automatically
[Off Timer]
This function allows you to switch the setting to turn off the monitor
automatically after a specified time has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min,
1-5h)
(1) Choose <PowerManager> from the Adjustment menu, and press
.
(2) Choose <Off Timer> from the <PowerManager> menu, and press
.
The <Off Timer> setting menu appears.
(3) Select “Enable” or “Disable” with
or
.
When selecting “Enable”, set a monitor Off time with
(4) Press
.
or
.
The setting is completed.
2-9 Displaying the level of power saving by
EcoView Index
This function allows you to display the power saving level by green indicator.
The power saving ratio comes to high as the indicator level meter lights towards
right.
(1) Press
.
The EcoView Index menu appears.
22
Chapter 2 Settings and Adjustments
NOTE
• EcoView Index appears when
adjusting brightness or switching the
FineContrast mode, etc.
You can switch the on/off setting
of displaying EcoView Index in
<EcoView Index> menu from the
<PowerManager> menu.
2-10 Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen Size> from <Others> menu.
Menu
Function
Full Screen
(default setting)
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the vertical
rate and the horizontal rate.
Normal
Displays images with the specified resolution.
Example: Image size 1280 x 1024 in case of S2432W
Full Screen
(Default setting)
Enlarged
Normal
(1920 x 1200)
(1500×1200)
(1280×1024)
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Screen Size> from the <Others> menu, and press
.
The screen size setting window appears.
(3) Select “Full Screen,” “Enlarged,” or “Normal” with
press
.
or
, and
The screen size setting is completed.
● To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Border Intensity> from the <Others> menu, and press
.
The <Border Intensity> menu appears.
(3) Adjust border intensity with
or
, and press
.
The border intensity adjustment is completed.
Chapter 2 Settings and Adjustments
23
2-11 Setting Adjustment Menu Display
● To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Size> from the <Menu Settings> menu, and press
.
The <Menu Size> menu appears.
(4) Select “Normal” or “Enlarged” with
or
, and press
.
The setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Position> from the <Menu Settings> menu, and press
.
The <Menu Position> menu appears.
(4) Select a menu position with
/
/
/
, and press
.
The setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
Adjustment range: Disable, Enable (15, 30, 45, 60s)
NOTE
• The display time of the FineContrast
mode and EcoView Index remains
unchanged.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press
.
The <Menu Off Timer> menu appears.
(4) Select “Enable” or “Disable” with
or
.
When selecting “Enable”, choose a time for displaying menu with
.
(5) Press
.
or
The setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Translucent> from the <Menu Settings> menu, and press
.
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with
The setting is completed.
24
Chapter 2 Settings and Adjustments
or
, and press
.
NOTE
2-12 Setting Orientation
● To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Orientation> from the Others menu, and press
.
.
The <Orientation> menu appears.
(3) Select “Landscape” or “Portrait” with
or
, and press
.
• For using the monitor with
“Portrait” position, the graphics
board supporting portrait display is
required. When using the monitor
with “Portrait” position, the setting
needs to be changed depending on the
graphics board used in your PC. Refer
to the manual of the graphics board
for details.
The setting is completed.
(4) When selecting “Portrait”, turn the monitor screen 90° in clockwise
direction.
2-13 Locking Buttons
This function allows you to lock
(1) Press
(2) Press
to prevent changing the adjusted/set status.
to turn off the monitor.
holding
down to turn on the monitor.
The Lock/Unlock setting is toggled by performing the operation in step 2.
2-14 Displaying Monitor Infomation [Information]
This function allows you to display the input signal status, current resolution
and model name.
Information 1/3 : I nput signal status (D-Sub/DVI Digital),
resolution and H/V frequency
Information 2/3 : E
nable/Disable setting for DDC/CI
Information 3/3 : M
odel name, serial number and usage time
(1) Choose <Information> from the Adjustment menu, and press
.
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
The <Information> menu appears.
(2) Then, press
to check settings, etc.
Chapter 2 Settings and Adjustments
25
NOTE
2-15 Enabling/Disabling DDC/CI
communication
• You can check the DDC/CI setting in
the <Information> menu.
This function allows you to enable/disable the DDC/CI communication.
(1) Press
to turn off the monitor.
(2) Press
holding
down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
2-16 Setting Power Indicator ON/OFF [Power Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the
monitor ON condition.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
(3) Select “Enable” or “Disable” with
or
.
, and press
The setting is completed.
2-17 Setting Language [Language]
This function allows you to select a language for the adjustment menu or
displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with
/
/
/
, and press
.
The setting is completed.
2-18 Setting EIZO logo display ON/OFF
The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
(1) Press
(2) Press
to turn off the monitor.
holding
down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
26
Chapter 2 Settings and Adjustments
2-19 Resuming the Default Setting [Reset]
Attention
There are two types of Reset. One is to reset the color adjustment only to the
default settings, and the other is to reset all the settings to the default settings.
• After resetting, you cannot undo the
operation.
● To reset color adjustment values
Only the adjustment values in the current FineContrast mode will revert to the
default settings (factory settings).
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Reset> from the <Color> menu and press
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
.
The color adjustment values revert to the default settings.
● To reset all adjustments to the factory default settings
Reset all adjustments to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
.
.
NOTE
• For main default settings, refer
to “Main default settings (factory
settings)” on page 40.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
.
All setting values revert to the default settings.
Chapter 2 Settings and Adjustments
27
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
DVI-D connector
Digital
To PC 1
D-Sub mini
15-pin Connector
Analog
To PC 2
D-Sub mini
15-pin Connector
DVI-D connector
Signal cable
(supplied FD-C39)
Signal cable
(supplied MD-C87)
● To switch the input signal
The input signal switches each time
is pressed.
When the signal is switched, the active input port name appears at the top right
corner of the screen.
28
Chapter 3 Connecting Cables
● To set input signal selection [Input Signal]
NOTE
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Priority setting
• When “Auto” is selected for <Input
Signal>, the monitor’s power-saving
function works only when the two
PCs are in the power-saving mode.
Function
Auto
When either PC is turned off or enters the powersaving mode, the monitor automatically displays
signals of another PC.
Manual
The monitor detects only the PC’s signals currently
displaying automatically. Select an active input signal
with
.
[Input signal setting]
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with
or
, and press
.
The setting is completed.
3-2 Adjusting the DVI Input Level [DVI Input Level]
This function allows you to adjust the DVI signal input level when using a DVI
long cable.
Adjustment range: Auto, Manual (1 to 8)
(1) Press
to turn off the monitor.
(2) Press
holding
down to turn on the monitor.
Attention
• Select "Manual" only if a noise
appears on the screen when using a
DVI long cable.
The <DVI Input Level> adjustment menu appears.
(3) Select “Auto” or “Manual” with
or
.
When selecting “Manual”, adjust the input level with
(4) Press
or
to display correctly.
.
The adjustment is completed.
Chapter 3 Connecting Cables
29
3-3 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to
a USB compatible PC
(2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later
(3) EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run
the PC.
(2) Connect the supplied USB cable between the downstream USB
port of a USB compatible PC (or another USB hub) and the
monitor’s upstream USB port.
(3) Connect the peripheral USB device to the USB port (downstream)
of the monitor.
Downstream
Upstream
30
The USB hub function is set up automatically upon connection of
the USB cable.
Chapter 3 Connecting Cables
Attention
• This monitor may not work depending
on PC, OS or peripheral devices
to be used. For USB compatibility
of peripheral devices, contact their
manufactures.
• Devices connected to the USB port
(upstream and downstream) work
when the monitor is in power saving
mode or when the power button of
the monitor is Off. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.
• When the main power switch is Off,
device connected to the USB port will
not operate.
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems (digital input) → See No.3 - No.8.
• Imaging problems (analog input) → See No.3 - No.12.
• Other problems → See No.13 - No.16.
• USB problems → See No.17.
Problems
Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly. If
the problem persists, turn off the main power, and then
turn it on again a few minutes later.
• Turn the main power switch on.
• Press
.
• Power indicator lights blue.
• Set each adjusting value in [Brightness], [Contrast] and
[Gain] to higher level. (see page 18, 20)
• When using the long DVI cable, adjust the DVI input
level using [DVI Input Level]. (see page 29)
• Power indicator lights orange.
.
• Switch the input signal with
• Operate the mouse or keyboard.
• Check whether the PC is turned on.
2. The message below appears.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
.
• When using the long DVI cable, adjust the DVI input
level using [DVI Input Level]. (see page 29)
• The message shows that the input signal is out of the
specified frequency range. (Such signal frequency is
displayed in red.)
Example:
• Check whether the signal setting of your PC matches
the resolution and the vertical frequency settings for the
monitor. (see page 9)
• Reboot the PC.
• Select an appropriate display mode using the graphics
board’s utility. Refer to the manual of the graphics board
for details.
fD:Dot Clock
(Displayed only when the digital signal inputs)
fH:Horizontal Frequency
fV:Vertical Frequency
3. The screen is too bright or too dark.
• Adjust using [Brightness] or [Contrast]. (The LCD
monitor backlight has a fixed life span. When the screen
becomes dark or begins to flicker, contact your local
dealer.) (see page 18)
• Turn on the Auto EcoView function. (see page 21) The
monitor detects the environmental brightness to adjust
the screen brightness automatically.
4. Characters are blurred.
• Check whether the signal setting of your PC matches
the resolution and the vertical frequency settings for the
monitor. (see page 9)
• Adjust using [Smoothing]. (see page 16)
Chapter 4 Troubleshooting
31
Problems
5. Afterimages appear.
Possible cause and remedy
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
6. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
7. Interference patterns or pressure marks remain on • Leave the monitor with a white or black screen. The
the screen.
symptom may disappear.
8. Noise appears on the screen.
• When entering the singnals of analog input, change
the setting to “On” in <Signal Filter> from the <Screen>
menu.
• When entering the signals of HDCP system, the normal
images may not be displayed immediately.
• When using the long DVI cable, adjust the DVI input
level using [DVI Input Level]. (see page 29)
9. Display position is incorrect.
• Adjust image position so that it is displayed properly
within the display area using [Position]. (see page 16)
• If the problem persists, use the graphics board’s utility if
available to change the display position.
10. Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using [Clock]. (see page 15)
11. Whole screen is flickering or blurring.
• Adjust using [Phase]. (see page 15)
12. Upper part of the screen is distorted as shown
below. • This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal.
13. The <Smoothing> icon on the Adjustment menu
<Screen> cannot be selected.
• Smoothing setting may not be required depending on the
display resolution. (You cannot choose the smoothing
icon.)
• <Smoothing> is disabled when the screen is displayed in
the following resolutions.
• 1920 × 1200
• 960 × 600
• Select [Enlarged] during <Screen Size> in the
resolution of 1600 × 1200
• Select [Normal] during <Screen Size>.
14. The adjustment menu does not appear.
• Check whether the operation lock function works.
(see page 25)
15. The auto adjust function does not work correctly.
• This function does not work when digital signal is input.
• This function does not work correctly with some graphics
boards.
16. No audio output.
• Check whether the mini jack cable is correctly connected.
• Check whether volume is set to 0.
• Check the setting of the PC and the audio playback
software.
32
Chapter 4 Troubleshooting
Problems
17. The monitor connected with the USB cable is not
detected. / USB devices connected to the monitor
does not work.
Possible cause and remedy
• Check whether the USB cable is connected correctly.
(see page 30)
• Change the USB port to another one. If the PC or
peripheral devices works correctly by changing the USB
port, contact your local dealer. (Refer to the manual of
the PC for details.)
• Reboot the PC.
• If the peripheral devices work correctly when the PC and
peripheral devices are connected directly, please contact
your local dealer.
• Check whether the PC and OS are USB compliant. (For
USB compliance of the respective devices, consult their
manufacturers.)
• Check the PC’s BIOS setting for USB when using
Windows. (Refer to the manual of the PC for details.)
Chapter 4 Troubleshooting
33
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
the LCD monitor on a soft cloth spread over on a stable
1 Lay
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
34
Chapter 5 Reference
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard.
– Clearance between the screw holes:
100 mm × 100 mm
–Thickness of plate: 2.6 mm
–Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
Use the screws as described below.
– Tilt stand
EZ-UP stand
Free mount type:
The screws supplied with this
monitor (M4 × 12mm)
– Height adjustable stand:
The screws fixing the stand to the
monitor
• When using an arm or stand, attach it
to meet the following tilt angles of the
monitor.
–Up 45 degrees, down 45 degrees
(horizontal display, and vertical
display rotated 90 degrees
clockwise)
• Connect the cables after attaching an
arm.
• If you need to remove the EZ-UP
stand, turn the panel on the monitor
to the left and right a little to appear
the four screws positioned under the
stand. Then unscrew the four screws.
5-2 Folding the EZ-UP stand
Perform the following procedures to fold the stand when re-packing a monitor
with an EZ-UP stand.
1 Remove the cable holder.
the monitor screen position until the hinge of the stand
2 Lower
touches the stand base, and attach the lock metal fitting.
Adjust the monitor angle so as the monitor screen not to touch the stand
base.
Lock metal fitting
Hinge
Stand Base
the monitor screen backward with keeping slide-up the
3 Fall
“Unlock” knob.
When maximally tilting (25º) the monitor screen backward, the “Unlock”
knob may be hard to be slid-up. Then, slightly tilt up the monitor to
vertical direction and slide-up the “Unlock” knob.
“Unlock” knob
Chapter 5 Reference
35
5-3 Specifications
S2232W
LCD Panel
22.0-inch (560 mm) TFT color LCD with anti-glare
Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch
0.282 mm
Horizontal Scan Frequency
Analog: 31-82 kHz
Digital: 31-65 kHz
Vertical Scan Frequency
Analog: 55-76 Hz (Non-interlace)
(1680 × 1050: 55-61 Hz)
Digital: 59-61 Hz (Non-interlace)
(VGA TEXT: 69-71 Hz)
Resolution
1680 dots × 1050 lines
Max. Dot Clock
Analog: 150 MHz
Digital: 120 MHz
Max. Display Color
Approx. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit
LUT)
Display Area (H × V)
473.8 mm × 296.1 mm
Power Supply
100-120 VAC ±10%, 50/60Hz 0.85A
200-240 VAC ±10%, 50/60Hz 0.43A
Power
Consumption
Screen Display On
90W or less (with USB load, Speaker working)
80W or less (without USB load, Speaker not working)
Power saving mode
1.5W or less (for D-Sub single signal input, without USB load, when stereo
mini jack cable is not connected, [Input Signal] : “Manual”)
Power button Off
1W or less (without USB load, when stereo mini jack cable is not
connected)
Main Power switch Off
0W
Input Signal Connector
D-Sub mini 15-pin, DVI-D connector (Applicable to HDCP)
Analog Input Signal (Sync)
Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission System
TMDS (Single Link)
Video Signal Memory
Analog signal: 45 (preset: 16)
Digital signal: 10
Audio Output
Speaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)
Headphone output: 2mW + 2mW
Line input
Input impedance : 48 kΩ (typ.)
Input level :1.0 Vrms (Max.)
Plug & Play
VESA DDC 2B / EDID structure 1.3
Dimensions
(Width) ×
(Height) ×
(Depth)
Main unit (including
511 mm (20.1 inch) × 439 - 521 mm (17.3 - 20.5 inch) × 208.5 mm
Height adjustable stand) (8.2 inch)
Main unit (including
Tilt stand)
511 mm (20.1 inch) × 415 mm (16.3 inch) × 205 mm (8.1 inch)
Main unit (including EZUP stand)
511 mm (20.1 inch) × 351.5 - 516.5 mm (13.8 - 20.3 inch) × 279.9 mm 307.5 mm (11.0 - 12.1 inch)
Main unit (without stand) 511 mm (20.1 inch) × 333 mm (13.1 inch) × 85 mm (3.35 inch)
36
Chapter 5 Reference
Mass
Main unit (including
Approx. 9.6 kg (21.2 lbs.)
Height adjustable stand)
Main unit (including
Tilt stand)
Approx. 7.6 kg (16.8 lbs.)
Main unit (including EZUP stand)
Approx. 11.4 kg (25.1 Ibs.)
Main unit (without stand) Approx. 6.6 kg (14.6 lbs.)
Movable range
Environmental
Conditions
USB
Height adjustable stand
Tilt: 40° Up, 0° Down
Swivel: 35° Right, 35° Left
Adjustable height: 82 mm (3.2 inch)
Rotation: 90° (clockwise)
Tilt stand
Tilt: 30° Up, -5° Down
EZ-UP stand
Tilt: 25° Up, 0° Down
Swivel: 172° Right, 172° Left
Adjustable height: 165 mm (6.5 inch)
Rotation: 90° (clockwise)
Temperature
Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)
Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
Operating humidity: 30% - 80% R.H. (no condensation)
Storage humidity: 30% - 80% R.H. (no condensation)
Pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard
USB Specification Revision 2.0
Port
Upstream port × 1, Downstream port × 2
Supply current
Downstream: Max. 500mA/1 port
S2242W
LCD Panel
22.0-inch (560 mm) TFT color LCD with anti-glare
Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch
0.247 mm
Horizontal Scan Frequency
Analog: 31-94 kHz
Digital: 31-76 kHz
Vertical Scan Frequency
Analog: 55-76 Hz (Non-interlace)
(1920 × 1200: 55-61 Hz)
Digital: 59-61 Hz (Non-interlace)
(VGA TEXT: 69-71 Hz)
Resolution
1920 dots × 1200 lines
Max. Dot Clock
Analog: 202.5 MHz
Digital: 162 MHz
Max. Display Color
Approx. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit LUT)
Display Area (H × V)
473.8 mm × 296.1 mm
Power Supply
100-120 VAC ±10%, 50/60Hz 0.85A
200-240 VAC ±10%, 50/60Hz 0.43A
Power
Consumption
Screen Display On
90W or less (with USB load, Speaker working)
80W or less (without USB load, Speaker not working)
Power saving mode
1.5W or less (for D-Sub single signal input, without USB load, when stereo
mini jack cable is not connected, [Input Signal] : “Manual”)
Power button Off
1W or less (without USB load, when stereo mini jack cable is not
connected)
Main Power switch Off
0W
Input Signal Connector
D-Sub mini 15-pin, DVI-D connector (Applicable to HDCP)
Chapter 5 Reference
37
Analog Input Signal (Sync)
Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission System
TMDS (Single Link)
Video Signal Memory
Analog signal: 45 (preset: 16)
Digital signal: 10
Audio Output
Speaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)
Headphone output: 2mW + 2mW
Line input
Input impedance : 48 kΩ (typ.)
Input level :1.0 Vrms (Max.)
Plug & Play
VESA DDC 2B / EDID structure 1.3
Dimensions
(Width) ×
(Height) ×
(Depth)
Main unit (including
511 mm (20.1 inch) × 439 - 521 mm (17.3 - 20.5 inch) × 208.5 mm
Height adjustable stand) (8.2 inch)
Main unit (including
Tilt stand)
511 mm (20.1 inch) × 415 mm (16.3 inch) × 205 mm (8.1 inch)
Main unit (including EZUP stand)
511 mm (20.1 inch) × 351.5 - 516.5 mm (13.8 - 20.3 inch) × 279.9 mm 307.5 mm (11.0 - 12.1 inch)
Main unit (without stand) 511 mm (20.1 inch) × 333 mm (13.1 inch) × 85 mm (3.35 inch)
Mass
Main unit (including
Approx. 9.6 kg (21.2 lbs.)
Height adjustable stand)
Main unit (including
Tilt stand)
Approx. 7.6 kg (16.8 lbs.)
Main unit (including EZUP stand)
Approx. 11.4 kg (25.1 Ibs.)
Main unit (without stand) Approx. 6.6 kg (14.6 lbs.)
Movable range
Environmental
Conditions
USB
Height adjustable stand
Tilt: 40° Up, 0° Down
Swivel: 35° Right, 35° Left
Adjustable height: 82 mm (3.2 inch)
Rotation: 90° (clockwise)
Tilt stand
Tilt: 30° Up, -5° Down
EZ-UP stand
Tilt: 25° Up, 0° Down
Swivel: 172° Right, 172° Left
Adjustable height: 165 mm (6.5 inch)
Rotation: 90° (clockwise)
Temperature
Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)
Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
Operating humidity: 30% - 80% R.H. (no condensation)
Storage humidity: 30% - 80% R.H. (no condensation)
Pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard
USB Specification Revision 2.0
Port
Upstream port × 1, Downstream port × 2
Supply current
Downstream: Max. 500mA/1 port
S2432W
LCD Panel
24.1-inch (610 mm) TFT color LCD with anti-glare
Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch
0.270 mm
Horizontal Scan Frequency
Analog: 31-94 kHz
Digital: 31-76 kHz
38
Chapter 5 Reference
Vertical Scan Frequency
Analog: 55-76 Hz (Non-interlace)
(1920 × 1200: 55-61 Hz)
Digital: 59-61 Hz (Non-interlace)
(VGA TEXT: 69-71 Hz)
Resolution
1920 dots × 1200 lines
Max. Dot Clock
Analog: 202.5 MHz
Digital: 162 MHz
Max. Display Color
Approx. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit
LUT)
Display Area (H × V)
518.4 mm × 324.0 mm
Power Supply
100-120 VAC ±10%, 50/60Hz 0.95A
200-240 VAC ±10%, 50/60Hz 0.45A
Power
Consumption
Screen Display On
95W or less (with USB load, Speaker working)
90W or less (without USB load, Speaker not working)
Power saving mode
1.5W or less (for D-Sub single signal input, without USB load, when stereo
mini jack cable is not connected, [Input Signal] : “Manual”)
Power button Off
1W or less (without USB load, when stereo mini jack cable is not
connected)
Main Power switch Off
0W
Input Signal Connector
D-Sub mini 15-pin, DVI-D connector (Applicable to HDCP)
Analog Input Signal (Sync)
Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission System
TMDS (Single Link)
Video Signal Memory
Analog signal: 45 (preset: 22)
Digital signal: 10
Audio Output
Speaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)
Headphone output: 2mW + 2mW
Line input
Input impedance : 48 kΩ (typ.)
Input level :1.0 Vrms (Max.)
Plug & Play
VESA DDC 2B / EDID structure 1.3
Dimensions
(Width) ×
(Height) ×
(Depth)
Main unit (including
566 mm (22.3 inch) × 456 - 538 mm (18.0 - 21.2 inch) × 208.5 mm
Height adjustable stand) (8.2 inch)
Main unit (including EZUP stand)
566 mm (22.3 inch) × 380.4 - 533.5 mm (15.0 - 21.0 inch) × 279.9 mm 307.6 mm (11.0 - 12.1 inch)
Main unit (without stand) 566 mm (22.3 inch) × 367 mm (14.4 inch) × 85 mm (3.35 inch)
Mass
Main unit (including
Approx. 10.2 kg (22.5 lbs.)
Height adjustable stand)
Main unit (including EZUP stand)
Approx. 12.0 kg (26.5 Ibs.)
Main unit (without stand) Approx. 7.2 kg (15.9 lbs.)
Movable range
Height adjustable stand
Tilt: 40° Up, 0° Down
Swivel: 35° Right, 35° Left
Adjustable height: 82 mm (3.2 inch)
Rotation: 90° (clockwise)
EZ-UP stand
Tilt: 25° Up, 0° Down
Swivel: 172° Right, 172° Left
Adjustable height: 153.1 mm (6.0 inch)
Rotation: 90° (clockwise)
Chapter 5 Reference
39
Environmental
Conditions
USB
Temperature
Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)
Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
Operating humidity: 30% - 80% R.H. (no condensation)
Storage humidity: 30% - 80% R.H. (no condensation)
Pressure
Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard
USB Specification Revision 2.0
Port
Upstream port × 1, Downstream port × 2
Supply current
Downstream: Max. 500mA/1 port
Main default settings (factory settings)
Auto EcoView
Off
Smoothing
3
FineContrast Mode
Custom
PowerManager
On
Input Signal
Manual
Screen Size
Full Screen
Off Timer
Menu Settings
Language
40
Chapter 5 Reference
Disable
Menu Size
Normal
Menu Off Timer
45 sec
English
Outside Dimensions
S2232W/S2242W (Height adjustable stand)
481.5(19)
168(6.6)
53.8
(2.12)
85
(3.35)
unit : mm (inch)
35°
511(20.1)
475.8(18.7)
264.5(10.4)
17.6(0.69)
40°
205.5(8.1)
116.5(4.6) 100(3.9) 116.5(4.6)
82(3.23)
272.5(10.7)
491(19.3)
205.5(8.1)
20
(0.79)
208.5(8.2)
14.6
(0.57)
17.45
(0.69)
100(3.9)
106(4.2)
8(0.31)
PIVOT
298.1(11.7)
333(13.1)
439~521(17.3~20.5)
90°
17~99(0.67~3.9)
528(20.8)
17.45
(0.69)
17.6(0.69)
35°
SWIVEL
240.5(9.5)
325(12.8)
S2232W/S2242W (Tilt stand)
unit : mm (inch)
53.8
(2.12)
85
(3.35)
481.5(19)
164(6.5)
17.6(0.69)
228(9)
178(7)
30°
205.5(8.1)
100(3.9)
205.5(8.1)
248.5(9.8)
95.4(3.76)
82(3.23)
13
(0.51)
116.5(4.6)
100(3.9) 116.5(4.6)
17.5
(0.69)
5°
298.1(11.7)
333(13.1)
511(20.1)
475.8(18.8)
17.5
(0.69)
415(16.3)
17.6
(0.69)
27(1.06)
205(8.1)
Chapter 5 Reference
41
S2232W/S2242W (EZ-UP stand)
481.5(1.9)
129.3(5.1)
53.8
(2.12)
85
(3.35)
unit : mm (inch)
°
172
172
°
SWIVEL
(220)
(208.5)
17.6(0.69)
94.5
(3.72)
64.3
(2.53)
φ272(10.7)
100(3.9)
205.5(8.1)
116.5(4.6) 100(3.9) 116.5(4.6)
350(13.8)
165(6.5)
183.5(7.2)
13.4(0.53)
17.5
(0.69)
PIVOT
536.5(21.1)
298.1(11.7)
333(13.1)
605.5(23.8)
516.5(20.3)
90°
205.5(8.1)
351.5(13.8)
17.5
(0.69)
25°
185(7.3)
511(20.1)
475.8(18.7)
17.6(0.69)
27.5
(1.08) 307.5(12.1)
279.9(11)
S2432W (Height adjustable stand)
unit : mm (inch)
56.3
(2.22)
85
(3.35)
532(20.9)
168(6.6)
35°
35°
SWIVEL
240.5(9.5)
325(12.8)
287.5(11.3)
22.8(0.9)
40°
42
Chapter 5 Reference
20(0.79)
208.5(8.2)
133.5(5.3)
133.5(5.3) 100(3.9)
82
(3.23)
272.5(10.7)
504(19.8)
182.4(7.2)
89(3.5)
8(0.31)
326(12.8)
367(14.4)
PIVOT
20.5(0.81)
577.1(22.7)
456~538 (18~21.2)
90°
233(9.2)
14.6(0.57)
566(22.3)
520.4(20.5)
20.5(0.81)
22.8(0.9)
100(3.9)
233(9.2)
S2432W (EZ-UP stand)
532(20.9)
unit : mm (inch)
°
172
172
°
SWIVEL
56.3(2.22)
85(3.35)
129.3(5.1)
566(22.3)
520.4(20.5)
22.8(0.9)
67(2.64)
Ø272(10.7)
64.3(2.53)
233(9.2)
380.4(15)
133.5(5.3) 100(3.9) 133.5(5.3)
100(3.9)
196.9(7.8)
153.1(6)
350(13.8)
166.5(6.6)
13.4(0.53)
20.5(0.81)
633(24.9)
PIVOT
233(9.2)
25°
552(21.7)
90°
326(12.8)
367(14.4)
533.5(21)
20.5(0.81)
22.8(0.9)
27.7(1.09)
307.6(12.1)
279.9(11)
Connector Pin Assignment
• DVI-D connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
T.M.D.S. Data 2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data0-
2
T.M.D.S. Data 2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19
T.M.D.S. Data0/5 Shield
4
NC*
12
NC*
20
NC*
5
NC*
13
NC*
21
NC*
6
DDC Clock (SCL)
14
+5V Power
22
T.M.D.S. Clock shield
7
DDC Data (SDA)
15
Ground (return for +5V,
Hsync, and Vsync)
23
T.M.D.S. Clock+
8
NC*
16
Hot Plug Detect
24
T.M.D.S. Clock(NC*: No Connection)
Chapter 5 Reference
43
• D-Sub mini 15-pin connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red video
6
Red video ground
11
NC*
2
Green video
7
Green video ground
12
Data (SDA)
3
Blue video
8
Blue video ground
13
H. Sync
4
NC*
9
NC*
14
V. Sync
5
Ground
10
Ground
15
Clock (SCL)
(NC*: No Connection)
• USB port
Upstream
Upstream
Series B connector
Series A connector
Contact No. Signal
Remarks
1
VCC
Cable power
2
– Data
Serial data
3
+ Data
Serial data
4
Ground
Cable ground
Accessories List
Cleaning Kit
EIZO ScreenCleaner
Speaker Unit
i•Sound L3*
* May not allowed to attach the option speaker depending on the stand type.
For the latest information about the accessories, refer to our web site.
http://www.eizo.com
44
Chapter 5 Reference
5-4 Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information, etc. between a PC
and the monitor.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image.
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps
to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and
decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable
to HDCP system.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Chapter 5 Reference
45
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor
consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are illuminated
as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS
defines the signal status between PC and monitor.
46
Chapter 5 Reference
5-5 Preset Timing
The following table shows factory preset video timing (for analog signal only).
Mode
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Frequency
Horizontal: kHz
Vertical: Hz
31.47
59.94
31.47
70.09
37.86
72.81
37.50
75.00
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75.00
48.36
60.00
56.48
70.07
60.02
75.03
67.50
75.00
60.00
60.00
63.98
60.02
79.98
75.03
75.00
60.00
81.30
65.00
87.50
70.00
93.75
75.00
65.29
59.95
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Positive
Horizontal
74.56
Negative
Vertical
59.89
Positive
Horizontal
74.04
Positive
Vertical
59.95
Negative
Dot clock
VGA 640×480@60Hz
25.2 MHz
VGA TEXT
720×400@70Hz
28.3 MHz
VESA 640×480@72Hz
31.5 MHz
VESA 640×480@75Hz
31.5 MHz
VESA 800×600@56Hz
36.0 MHz
VESA 800×600@60Hz
40.0 MHz
VESA 800×600@72Hz
50.0 MHz
VESA 800×600@75Hz
49.5 MHz
VESA 1024×768@60Hz
65.0 MHz
VESA 1024×768@70Hz
75.0 MHz
VESA 1024×768@75Hz
78.8 MHz
VESA 1152×864@75Hz
108.0 MHz
VESA 1280×960@60Hz
108.0 MHz
VESA 1280×1024@60Hz
108.0 MHz
VESA 1280×1024@75Hz
135.0 MHz
VESA 1600×1200@60Hz
(S2232W/S2242W)
162.0 MHz
VESA 1600×1200@65Hz
(S2232W/S2242W)
175.0 MHz
VESA 1600×1200@70Hz
(S2232W/S2242W)
189.0 MHz
VESA 1600×1200@75Hz
(S2232W/S2242W)
202.5 MHz
VESA CVT
1680×1050@60Hz
146.3 MHz
VESA CVT
1920×1200@60Hz
(S2232W/S2242W)
193.3 MHz
VESA CVT RB
1920×1200@60Hz
(S2232W/S2242W)
154.0 MHz
Polarity
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
Chapter 5 Reference
47
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
48
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan S2232W/S2242W/S2432W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
49
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f)Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1680 ×
1050 (S2232W)/1920 × 1200 (S2242W/S2432W), Digital Eingang und mindestens 60,0 Hz
Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe
Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem
Zeichenkontrast.)
Übermäßiger Schalldruck von Ohrhörern bzw. Kopfhörern kann einen Hörverlust bewirken.
Eine Einstellung des Equalizers auf Maximalwerte erhöht die Ausgangsspannung am Ohrhörer- bzw.
Kopfhörerausgang und damit auch den Schalldruckpegel.
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
[Begrenzung des maximalen Schalldruckpegels am Ohr]
Bildschirmgeräte: Größte Ausgangsspannung 150 mV
50
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising