EnGenius ENH-200 2.4GHz Long Range 11n Outdoor

EnGenius ENH-200 2.4GHz Long Range 11n Outdoor
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
Product Name: EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless Client Bridge & Access Point
Manufacturer: Model Number: ENH-200
Please note: The EnGenius ENH-200 is End of Life. Please see the EnGenius EnGenius
ENS-200 as an alternative.
EnGenius ENH200 2.4GHz Long Range 150Mbps 11n Outdoor Wireless Client Bridge &
Access Point
For alternative wireless equipment please check out Ubiquiti NanoStation 2
Business Class Long Range Wireless N Outdoor Client Bridge/Access Point
ENH-200 is a long-range outdoor wireless Client Bridge/ Access Point that operates on 2.4GHz
frequency spectrum and provides high wireless data rate up to 150Mbps. The EnGenius ENH200
features high transmitted output power, high receivable sensitivity and built-in dual polarization
directional antenna. The high power can extend wireless range coverage. The dual polarity
antenna allows installer to choose the best orientation to avoid interference, thus maximizing
performance and stability.
Supporting highly secure WPA/WPA2 encryption and MAC address filter ensure an
uncompromised network security. Furthermore the MAC address filter allows administrator select
exactly which client stations can access to your network or not. The RSSI signal strength
indicators, PoE injector, mast strap and wall mount accessories that come with the pack makes
installation an easy work.
EnGenius' EnGenius ENH200 is a perfect solution for integrators and installers to establish
building-to-building wireless network connection; for service provider to use as a high performance
CPE; for IP security camera installer deploying camera at the outdoor environment.
Basic Info
• User Type: Business
• Technology: Wireless N
• Model Number: EnGenius ENH200
The following list summarizes the key features of the EnGenius ENH200
• High-output power up to 26 dBm delivers superior range and coverage
• Fully interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices
• High-speed data rates up to 150 Mbps make the EnGenius ENH200 ideally suited for handling
heavy data payloads such outdoor security camera, video streaming, etc.
• WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network
connections
• RSSI indicator makes it easy to select the best signal for Access Point connections
• Power-over-Ethernet capabilities allow for flexible installation locations and cost savings
• Four SSIDs let clients access different networks through a single Access Point, and assign
different policies and functions for each SSID
• Multi-function operation (CB/AP/WDS/APRouter) modes provide flexible deployment
• The AP-Router mode with PPPoE/PPTP, DHCP server function support in special network
deployment in which the CPE also serves as Internet gateway
• QoS (WMM) support enhances performance and user experiences
www.4gon.co.uk | op@support.4gon.co.uk | Page 1/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
Key Differentiators
• High-Power Long Range cover
• Maximum 500mW Power output ensures robust signal overcoming long distances barrier
• Provides superior Wi-Fi coverage over competitors
• High performance three time as fast as wireless G. The Maximum wireless connection rate is up
to 150 Mbps. Backward compatible to wireless b/g network.
• Integrated Dual Polarity Antenna Design
• Selectable vertical or horizontal antenna polarity to avoid interference and Maximize
performance
• Design for Outdoor Deployment
• IP55 waterproof housing against rain, moisture
• Cable accessory kit prevents rain and dew from getting into the device from a cable connection
• Permits different levels of network access
• Broadcast multiple SSID when it is in AP mode
• VLAN tagging allows different access levels
Specifications
Hardware Specifications
• MCU: Atheros AR7240
• Memory: 32 MB
• Flash: 8 MB
• Physical Interface: 10/100 Fast Ethernet port x 2
• One Reset button
• LED's Status:
• Power (Status)
• LAN1/LAN2 (10/100Mbps)
• WLAN (Wireless is up)
• 3 x Link Quality (Client Bridge mode)
• Power requirements:
• Active Ethernet: (Power over Ethernet) Proprietary PoE design
• Power Adapter: 24VAC / 0.6A
RF Specification
Wireless standard - IEEE802.11 b/g/n
• Frequency Band: 2.412 - 2.472GH (b/g/n)
• Modulation Technologies: IEEE 802.11b: DBQSK, DQPSK, CCK
• IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
• IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM
• Operating Channels: 11 channels
• Transmit Power
• 802.11b (2.412 - 2.472GHz)
• 27 [email protected]
www.4gon.co.uk | op@support.4gon.co.uk | Page 2/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
//
/*
// ]]>
• 27 [email protected]
//
/*
// ]]>
• 27 [email protected]
//
/*
// ]]>
• 27 [email protected]
//
/*
// ]]>
• 802.11g (2.412 - 2.472GHz)
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
www.4gon.co.uk | op@support.4gon.co.uk | Page 3/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• 802.11n (2.412 - 2.472GHz)
• MCS0 / MCS8 26dBm
• MCS1 / MCS9 26dBm
• MCS2 / MCS10 26dBm
• MCS3 / MCS11 26dBm
• MCS4 / MCS12 24dBm
• MCS5 / MCS13 23dBm
• MCS6 / MCS14 22dBm
• MCS7 / MCS15 21dBm
• Receiver Sensitivity (Typical)
• 802.11b (2.412 - 2.472GHz)
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• 802.11g (2.412 - 2.472GHz)
www.4gon.co.uk | op@support.4gon.co.uk | Page 4/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• [email protected]
//
/*
// ]]>
• 802.11n (2.412 - 2.472GHz)
• MCS0 / MCS8 -95dBm
• MCS1 / MCS9 -92dBm
• MCS2 / MCS10 -87dBm
• MCS3 / MCS11 -85dBm
• MCS4 / MCS12 -80dBm
• MCS5 / MCS13 -79dBm
• MCS6 / MCS14 -74dBm
• MCS7 / MCS15 -73dBm
www.4gon.co.uk | op@support.4gon.co.uk | Page 5/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
Features
• Antenna: Internal Antenna with Vertical/Horinzontal dual polarity
• Antenna gain: 10 dBi
• Frequency Band Range: 2.4 GHz - 2.5 GHz
• Horizontal Beam width: 37°
• Vertical Beam width: 73°
• Antenna Polarity: Dual-Polarized: Vertical/Horinzontal
• External antenna connector: N/A
Software Features
• Topology: Infrastructure
• Protocol: IEEE802.3, 802.3U, 802.11 b/g/n (2.4 GHz)
• Operation mode: Client Bridge/Access Point/WDS bridge/Client Router
• Service: DHCP server/client
• VPN: VPN Pass-through
• Networking: PPPoE, PPTP
• Narrow bandwidth: Selectable 5MHz/10MHz/20MHz/40MHz
Management
• Firmware upgrade: Reset & Backup, Ping & Trace Route
• MIB: MIB I, MIB II(RFC1213), Private MIB
• SNMP: SNMP v1, v2c
• Security:
• WEP Encryption-64/128/152 bit
• WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
• WPA/WPA2 Enterprise (WPA-EAP using TKIP)
• 802.1x Authenticator
• Hide SSID in beacons
• MAC address filtering, up to 50 field
• Wireless STA (Client) connected list
• QoS: WMM (Wi-Fi Multimedia)
Environmental & Physical
• Temperature Range
• Operating: -20°C to 70°C (-4°F to 158°F)
• Storage: -30°C to 80°C (-22°F to 176°F)
• Humidity (non-condensing): 0%~90% typical
• Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height:
www.4gon.co.uk | op@support.4gon.co.uk | Page 6/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
2.17” (55mm)
• Weight: 0.9 lb
• Certifications: FCC, CE, IC
Accessories - Select From drop down options at top of page.
POE-12TO24V
Converter to enable you to run hardware such as many of our outdoor bridging kits etc. which
need 24V, from normal 12V batteries.
WLMNT
20" J Pole + fixed Wall mount: this kit is to convert any pole mount antenna to wall mount BUT
not suitable for the grid antenna due to their large size and weight.
WLMNT-30MMCLIP
Used when trying to mount outdoor products to 1" diameter poles (i.e. our WLMNT pole).
www.4gon.co.uk | op@support.4gon.co.uk | Page 7/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
www.4gon.co.uk | op@support.4gon.co.uk | Page 8/9
Created on: Friday 09 June, 2017
EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless
Client Bridge & Access Point
POE-CARSOCKET-50CM
To allow you to take DC power from a battery, for example, and present it as a car/DC cigarette
lighter socket. Comes with 50cm cable terminated by colour coded 4.8mm receptacles. Maximum
current 5 amps.
POE-12V7AHLEADACID
12V 7Ah sealed lead acid battery (please do not order this product for shipping outside of of
mainland UK)
Please Enquire
Options available for EnGenius ENH-200 2.4GHz Long Range 11n Outdoor Wireless Client Bridge & Access Point :
12 to 24V DC/DC converter (12TO24V)
Not Required, Required (+£26.81).
30mm Jubilee Clip to fit WLMNT (WLMNT-30MMCLIP)
Not Required, Required (+£4.72).
20" J Pole fixed Wall mount
Not Required, Required (+£1.70).
POE-CARSOCKET-50CM
Not Required, Required (+£4.45).
POE-(12V7AHLEADACID)
Not Required, Required (+£24.40).
www.4gon.co.uk | op@support.4gon.co.uk | Page 9/9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising