Newtec Newtec
AZ212
1+1 Modulator Redundancy Switch
Azimuth Product Family
Description
The AZ212 1+1 Modulator Redundancy Switch is a state-of-theart product designed to provide a 1+1 protection scheme for
Broadcast and IP Satellite Modulators.
The AZ212 set of advanced features guarantees a very low
switching time increasing significantly the service availability.
The AZ212 enables cost effectively the implementation of
reliable IP protection schemes requested by modern IP head-end
architecture.
The Switch and the Switch Back operations between the main and
the spare modulator can be done automatically through alarm
contacts, manually through the front panel, a dedicated webGUI,
or remotely via a monitoring and control system.
When the automatic mode is activated, the AZ212 monitors
continuously the devices. In case of alarm, the AZ212 triggers
a redundancy switch between the devices, according to rules
defined by the set of parameters governing the switching
operation.
The AZ212 is easy to install, configure, control and operate. The
web interface presents an intuitive synoptic view of the setup and
the SNMP interface allows simple integration into NMS systems.
The AZ212 allow defining a large set of switching behaviors
through the use of a limited set of parameters.
Key features
• Dual redundant power supply
• Automatic or manual operational mode
• Logical Ethernet switching
• Automatic Switch Back
• Copy the full configuration between devices
• Automatic memorization of configuration
• Reference device
• GUI with synoptic view
• User-configurable switching logic
• Switching of ASI, IP, IF, L-band and RF signals
• Stand alone operation or integrated in a network
management system
• Monitoring & control via SNMP
• Management of device configuration
Main advantages
• High reliability
• Increases significantly the service availability
• Cost effective solution
• Easy setup installation
• Easy to use control and operate
• Easy integration into NMS systems
• High compactness
Applications
• DTH
• Broadcast Contribution & Exchange
• DSNG
• TV/Radio Distribution
• IP Trunking
• Telco Backbone
• Government
• Intelligence
Related products
AZ110 Broadcast Satellite Modulator
AZ170 IP Satellite Modulator
AZ178 High Speed IP Satellite Modulator
AZ202 Universal Switching system
AZ7x0 Frequency converters
M6100 Broadcast Satellite Modulator
Related documents
Care Pack Brochure
Newtec
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
Newtec
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
Newtec
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
www.newtec.eu
Rev. 2/06.2012
Specifications - AZ212(R1.1)
Input Interface switch
Configurations
ASI
• Connectors 4 x BNC (F) - 75 ohms
• Frequency DC - 270 MHz
• Insertion loss < 2 dB
• Isolation > 50 dB (300 MHz)
Main Modulator
Data in
Out
Spare Modulator
Data in
Output interface switch
1+1 Modulator Redundancy Switch (AZ212)
IF (75 ohms, DC - 270 MHz)
• Connectors BNC (F) - 75 ohms
• Frequency
DC - 270 MHz
• Insertion loss < 2 dB
• Isolation > 50 dB (300 MHz)
No input switching –Cross-over output switching
Main Modulator
IF (50 ohms, DC – 270 MHz)
• Connectors BNC (F) - 50 ohms
• Frequency DC - 270 MHz
• Insertion loss < 2 dB
• Isolation > 50 dB (300 MHz)
L-band (50 ohms, DC-2.5 GHz)
• Connectors BNC (F) - 50 ohms
• Frequency DC - 2.5 GHz
• Return loss > 18 dB (L band)
• Insertion loss
< 0.5 dB
• Isolation > 75 dB (L band)
Data in
Out
Spare Modulator
1+1 Modulator Redundancy Switch (AZ212)
Cross-over input switching – Cross-over output switching
Ordering information
L-band (50 ohms, DC- 2.15 GHz)
• Connectors SMA (F) - 50 ohms
• Frequency DC – 2.15 GHz
• Return loss > 14 dB
• Insertion loss
< 2 dB
• Isolation > 50 dB
AZ212 1+1 Modulator Redundancy Switch
Order n°
1+1 Modulator Redundancy Switch, SNMP
Input interface switch : No input switching
Output interface switch: IF, BNC, 75 ohms, DC - 270 MHz
AZ212
Configuration options
Category Max. 1 option per category
L-band (50 ohms, DC – 18 GHz)
• Connectors SMA (F) - 50 ohms
• Frequency DC - 18 GHz
• Return loss > 18 dB (L band) >13 dB (RF)
• Insertion loss < 0.5 dB
• Isolation > 75 dB (L band) >60 dB (RF)
Input interface
switch
Output interface
switch
Generic
No input switching
Default
ASI / G.703, BNC 75 ohms
DA-01
GbE Logical Switching
DA-05
IF, BNC, 75 ohms, DC - 270 MHz
Default
IF, BNC, 50 ohms, DC - 270 MHz
DB-01
L-band, BNC, 50 ohms, DC - 2.5 GHz
DB-03
L-band/RF, SMA, 50 ohms, DC - 18 GHz
DB-04
L-band, SMA, 50 ohms, DC - 2.15 GHz*
DB-05
Care Pack 3 Basic
GA-08
Care Pack 3 Enhanced
GA-09
Services
Category Monitor and control interfaces (via the main unit)
• Web server GUI (HTTP) via web browser
• Diagnostics report, alarm log (HTTP)
• Control of Newtec devices with RMCP over TCP/IP
• SNMP v.2c
Assistance
*Toggle switch
Other configurations with G.703, SDH and HSSI interfaces or optical splitters as well
as N+1 protection schemes are available with the Newtec AZ200 or AZ202 products.
Physical (main and extension units)
Contact your sales representative for details (sales@newtec.eu)
• 1RU, width: 19”, depth 51 cm, 6 kg
• Dual Power supply: 100 & 180-260 Vac, 105 VA, 47-63 Hz
• Temperature
- Operational: 0°C to 37°C
- Storage: -40 to +70°C
• Humidity: 5% to 85% non-condensing
• CE label
Europe
North-America
South-America
Asia-Pacific
China
MENA
Tel: +32 3 780 65 00
Tel: +1 203 323-0042
Tel: +55 11 2092 6220
Tel: +65 6777 22 08
Tel: +86 10-823 18 730
Tel: +971 4 390 18 78
Fax: +32 3 780 65 49
Fax: +1 203 323-8406
Fax: +55 11 2093 3756
Fax: +65 6777 08 87
Fax: +86 10-823 18 731
Fax: +971 4 368 67 68
This brochure is provided for information purposes only. The details contained in this document, including product and feature specifications, are subject to change without notice and shall not bind Newtec in any way.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising