NEC 2450-2490WUXI Rev 0 SAW
2450 Series LCD Touch Screen Monitor
Large Format Interactive LCD
Display Werks Part #2450-TU-2490WUXI-2S, Based on the NEC 2490WUXi2

24” LCD Touch Screen.

Professionally Integrated SAW
(Surface Acoustic Wave) Touch Screen.

1920 x 1200 High Resolution.

16:10 Aspect Ratio

Low Power Consumption.

USA Service and Technical Support.

Touch Screen Integrated within Factory Enclosure.

3 Year Warranty (Monitor).

3 Year Warranty (Touch Screen and Controller).
LCD Monitor Model: NEC 2490WUXi2
LCD Element: 24.1” Wide LCD
Max. Resolution: (pixels) 1920 x 1200
Pixel pitch: 0.27mm (H) x 0.27 (V)
Colors Supported: 16.7 Million
Display Response Time: 8 ms G-T-G (16 ms)
Viewing Angle: 178° right/left/up/down
Contrast Ratio: 1000:1
Brightness: 320 cd/m²
Power Consumption: 75 Watts
Power Requirements: AC: 100 -120 VAC / 220—240 VAC
Operating Temperature: 5°C to 35°C
Operating Humidity: 10% to 85% (no condensation)
Dimensions: inch (mm) Approx. 21.8 x 14.2 x 4.1 (553.7 x 360.7 x 104.14) with Touch Screen integrated.
Weight lbs.: (kg) Approx. 23.2 lbs (10.5) with integrated Touch Screen installed.
Input Terminals
DVI-D
24 pin
Analogue VGA
15 Pin D-Sub
Power
AC 100-240V 50/60 Hz
Quality and Innovation
in LCD Integration. TM
NEC 2450-2490WUXI Rev 0 SAW
2450 Series LCD Touch Screen Monitor
Large Format Interactive LCD
Display Werks Part #2450-TU-2490WUXI-2S, Based on the NEC 2490WUXi2
Surface Acoustic Touch Screen Specifications:

Total additional weight to monitor: 4.0 lbs.

Construction: Glass panel with transducers attached to the front surface of the glass substrate.

Positional Accuracy: Standard deviation of error is less that 0.080 in (2.03 mm) Equates to less than 1% error on most displays.

Light Transmission: Up to 92%.

Operating Temperature: -20°C to 50°C

Touch Active Force: Less then 3 ounces

Operational Altitude: 10,000 ft Above Sea Level

Expected Life Performance: No known wear-out mechanism, as there are no layers, coating, or moving parts. This SAW technology
has been operationally tested to more than 50 million touches in one location without failure, using a stylus similar to a finger.

Total Additional Depth to NEC 2490WUXi2: 0”
Touch screen Connector Specifications:

Interface: USB 2.0 or Serial RS-232 (specify when ordering)

Maximum Single USB Cable Length: 5m (16.4 ft)
Note: When using USB over distances of 5m, a USB extension system can be used.
Note: Power for the LCD monitor itself requires a connection to a 110 VAC receptacle.
NEC 2450-2490WUXI Rev 0 SAW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising