CUTMASTER, Why TRUE?

CUTMASTER, Why TRUE?
CUTMASTER, Why TRUE?
The new and improved CUTMASTER® TRUE™ Series has been
designed with the idea that recommended cut capacity should
also be the TRUE cut capacity.
The TRUE Cut Series eliminates the concept of having to
“buy up”, purchasing a machine larger than you actually need.
With the introduction of the CUTMASTER TRUE Series,
a 12mm recommended capacity machine will cut 12mm
material ALL DAY, EVERY DAY. NO EXCEPTIONS.
W H E N Y O U N E E D I T.
3
THREE YEAR
WARRANTY
Truly MORE...
Truth #1
True Confidence
Truth #2
True Strength
Truth #3
True Protection
Truth #4
True Tip™
Truth #5
True Flexibility
Truth #6
True Portability
www.thermal-dynamics.com
The CUTMASTER ® TRUE™ Series microprocessor controlled front panel LED’s
assure extreme operator confidence and error free use from setup to clean up.
The CUTMASTER TRUE Series allows you to work all day at our recommended
cut capacity. But when you need that extra punch, you can be confident
that it’s there.
As if a 3 year unlimited power supply warranty wasn’t enough, the
CUTMASTER TRUE Series is the only line of plasma cutting machines that
features TRUE GUARD™ - a rugged roll bar for added durability
The Thermal Dynamics CUTMASTER TRUE Series plasma system offers
the only 60 Amp drag cutting tip on the market today.
The new CUTMASTER TRUE Series features the flexible, patented 1Torch® .
There’s one set of consumable parts for the entire range of machines, lead
extensions provide cutting up to 30.5m from power supply, and the flexibility
to move quickly from hand to mechanized cutting with the change of a torch.
The CUTMASTER TRUE Series offers lighter,
more portable machines without compromising
performance.
page 3
20
10
The CUTMASTER 10 provides the same reliability and performance you have
come to expect from the CUTMASTER Series. This 30 Amp unit produces quality
cuts from gauge all the way up to maximum cut of 12mm. Unlike some of its
competition, the CUTMASTER 10 also offers features like auto pilot restart, ATC ®
torch quick disconnect, and automatic voltage selection.
12
The CUTMASTER 10 is the most durable 10mm plasma cutting machine on the
market today. It is the only system in its class to offer the protection of
TRUE GUARD™.
Applications include:
•
•
•
•
Auto Body Repair
Plumbing
Home Shop
Metal Stud Construction
• HVAC
Building & Roofing
• Metal
Construction
Repair & Rental Fleets
• Marine
CUT CAPACITY
M = Maximum
G = Genuine
Genuine
Maximum
Severance
10mm
12mm
16mm
19
-M
16
12
10
6
-M
-G
-M
-G
-G
-G
mm
Graph Key
page 4
Competitor A
Competitor B
Competitor C
30
Max Amperage Output - (Amps)
Output Power - (Kw)
Genuine Cut - mm
2.8
10
Maximum Cut - mm
12
Severance Cut - mm
16
Pierce Rating - mm
6
Input Power (Volts, Amps, Phase, Hz)
230V/14A
1 Phase 50/60Hz
Duty Cycle (@40˚C)
35% @ 30A,
Dimensions (H x W x L) - mm
381 x 305 x 610
Weight - kg
17.7
Torch Model
SL60
Air Pressure - bar
4.5
Flow - L/m
141
Warranty (Unit/Torch)
Parts and Labor
3/1
Certifications
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
10
12
The CUTMASTER 12 provides the same reliability and performance
you have come to expect from the CUTMASTER Series. This 40 Amp
unit produces quality cuts from gauge all the way up to maximum cut
of 15mm. Unlike some of its competition, the CUTMASTER 12 also
offers features like auto pilot restart, ATC ® torch quick disconnect, and
automatic voltage selection.
The CUTMASTER 12 is the most durable 12mm plasma cutting machine
on the market today. It is the only system in its class to offer the
protection of TRUE GUARD™.
Applications include:
• Construction
• Maintenance/Repair
• Fabrication
CUT CAPACITY
M = Максимальный
Ч = Чистовой
19
-M
16
12
10
-M
-M
-Ч
6
-Ч
-Ч
Competitor A
Maximum
Severance
12mm
15mm
20mm
Competitor B
Competitor C
3.8
12
Maximum Cut - mm
15
Severance Cut - mm
20
Pierce Rating - mm
6
Input Power (Volts, Amps, Phase, Hz)
400V/8A
3 Phase 50/60Hz
230V/400V 15A/8A
3 Phase 50/60 Hz
Duty Cycle (@40˚C)
60% @ 40A
Dimensions (H x W x L) - mm
416 x 273 x 572
Weight - kg
19.5
Torch Model
SL60
Air Pressure - bar
Flow - L/m
Warranty (Unit/Torch)
Parts and Labor
4.8
165
Certifications
www.thermal-dynamics.com
40
Max Amperage Output - (Amps)
Output Power - (Kw)
Genuine Cut - mm
-Ч
mm
Graph Key
Genuine
3/1
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
page 5
25
20
The CUTMASTER 20 is one of most powerful and lightest weight 20mm
machine on the market today.
The CUTMASTER TRUE Series are the only systems that offer the precision
of the TRUE Cut Drag Tip Series™. The 60 Amp tip allows the system
to drag cut up to 6mm with ease. Giving the absolute best cut quality
possible.
10
This unit cuts through mild, stainless, or aluminum up to 32mm thick.
The CUTMASTER 20 combines power with the well known performance
and features of the industry-leading 1Torch ®.
Applications include:
• Construction
• Maintenance/Repair
• Fabrication
12
Severance
Genuine
CUT CAPACITY
30
20mm
-M
-M
-M
-M
-G
-G
12
-G
-G
6
mm
Graph Key
page 6
Competitor A
32mm
25mm
M = Maximum
G = Genuine
25
20
Maximum
Competitor B
Max Amperage Output - (Amps) 60
Output Power - (Kw)
6.2
Genuine Cut - mm
20
Maximum Cut - mm
25
Severance Cut - mm
32
Pierce Rating - mm
12
Input Power (Volts, Amps, Phase, Hz)
400V/16A
3 Phase 50/60Hz
230V/400V 24A/16A
3 Phase 50/60Hz
Duty Cycle (@40˚C)
40% @ 60A
Dimensions (H x W x L) - mm
381 x 305 x 610
Weight - kg
19.5
Torch Model
SL60
Air Pressure - bar
4.8
Warranty (Unit/Torch)
Parts and Labor
3/1
Certifications
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
Competitor C
35
25
The CUTMASTER 25 weighs in at a mere 19.5 kg almost 50% less than its
leading competitor, while still offering superior cutting power.
Don’t let the size of this unit fool you, it’s more than capable of cutting
30mm.
20
This unit, like all other TRUE CUTMASTERS, is equipped with the 1Torch ®.
Applications include:
10
• Heavy Fabrication
• Manufacturing
• Contractors
Severance
Genuine
12
CUT CAPACITY
40
M = Maximum
G = Genuine
30
25
20
-M
-M
-G
-G
-G
-M
-G
-G
mm
Graph Key
-M
Competitor A
Competitor C
Competitor B
Competitor D
25mm
30mm
38mm
Max Amperage Output - (Amps) 80
Output Power - (Kw)
9
Genuine Cut - mm
25
Maximum Cut - mm
30
Severance Cut - mm
38
Pierce Rating - mm
15
Input Power (Volts, Amps, Phase, Hz)
400V/20A
3 Phase 50/60Hz
230V/400V 39A/20A
3 Phase 50/60Hz
Duty Cycle (@40˚C)
40% @ 80A
Dimensions (H x W x L) - mm
381 x 305 x 610
Weight - kg
19.5
Torch Model
SL60
Air Pressure - bar
5.2
Flow - (l/m)
Warranty (Unit/Torch)
Parts and Labor
189
Certifications
www.thermal-dynamics.com
Maximum
3/1
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
page 7
40
35
The CUTMASTER 35 is one of the fastest cutting 35mm machine on
the market today. This unit’s light weight compact design combined
with multiple voltage selection makes it the most portable and powerful
cutting machine available.
25
This unit combined with the 1Torch ® has a maximum cut capacity of
40mm. More cut capacity than any other system in its class!
Applications include:
20
• Heavy Fabrication
• Manufacturing
CUT CAPACITY
45
-M
-M
-M
-M
-G
30
-M
25
-G
-G
10
-G
mm
Graph Key
page 8
Maximum
35mm
M = Maximal
G = Genuine
40
Severance
Genuine
Competitor A
Competitor C
Competitor B
Competitor D
12
40mm
45mm
Max Amperage Output - (Amps) 100
Output Power - (Kw)
12
Genuine Cut - mm
35
Maximum Cut - mm
40
Severance Cut - mm
45
Pierce Rating - mm
20
Input Power (Volts, Amps, Phase, Hz)
400V/27A
3 Phase 50/60Hz
230V/400V 45A/27A
3 Phase 50/60Hz
Duty Cycle (@40˚C)
80% @ 100A
Dimensions (H x W x L) - mm
381 x 305 x 762
Weight - kg
28.1
Torch Model
SL100
Air Pressure - bar
5.2
Flow - (l/m)
212
Warranty (Unit/Torch)
Parts and Labor
3/1
Certifications
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
40
The CUTMASTER 40 is the heavy weight of hand held cutting
systems. This unit comes in a compact-light weight package, but
don’t let that fool you. It offers enough cutting power to cut 50mm
material.
35
This compact unit, like all other CUTMASTERS, comes standard
with the 1Torch ®. Providing you with the well known comfort and
reliability famous throughout the industry.
Applications include:
• Heavy Fabrication
• Manufacturing
25
CUT CAPACITY
50
M = Maximum
G = Genuine
45
-M
40
-G
30
-M
20
-G
-G
-G
mm
Graph Key
Competitor A
Competitor B
10
Competitor C
12
www.thermal-dynamics.com
Genuine
40mm
-M
-M
Severance
Maximum
50mm
55mm
Max Amperage Output - (Amps) 120
Output Power - (Kw)
15.4
Genuine Cut - mm
40
Maximum Cut - mm
50
Severance Cut - mm
55
Pierce Rating - mm
25
Input Power (Volts, Amps, Phase, Hz)
400V/32A
3 Phase 50/60Hz
230V/400V 56A/32A
3 Phase 50/60Hz
Duty Cycle (@40˚C)
80% @ 120A
Dimensions (H x W x L) - mm
381 x 305 x 762
Weight - kg
28.1
Torch Model
SL100
Air Pressure - bar
5.2
Flow - (l/m)
212
Warranty (Unit/Torch)
Parts and Labor
3/1
Certifications
CE, ROHS, IP23C,
NTRL/C, CCC, C-TICK
page 9
Superior Performance
Features
TRUE GUARD™ roll bar provides easy
transportation and protects the front and
rear of the power supply for
unmatched durability.
Lightweight design improves portability
(Reduced nearly 50%).
Color Coded LED’s
indicate pressure status
and setup errors.
All user controls are
conveniently located
on the front panel.
Trigger latch feature prevents hand fatigue
during long cuts. Auto Pilot Restart feature
instantly reignites the pilot arc while cutting
expanded metals.
Convenient storage compartment
for spare and consumable parts
The Industries only 60 Amp Drag Tip
Note: Features Apply to 12,20,25,35, and 40 models
page 10
The 1Torch™ torch performs with virtually all
plasma cutting power supplies. The 1Torch is both
easy and comfortable to use, benefits from the
latest in high performance torch technology giving
longer consumable parts life, better cut
performance, flexibility,durability and versatility.
1 Torch® Consumable Parts Application Guide
For SL60 ®and SL100 ®Manual Cutting and Gouging Operations
Drag Tip Cutting
The preferred method of cutting light gauge metal up to 6mm thickness. Produces the best cut quality,
narrowest kerf width, and fastest cutting speeds, and with little to no distortion. Traditional drag cutting
was limited to 40 Amps or less, now with Thermal Dynamics TRUE Cut Drag Tip Series™ technology
it is possible to cut up to 60 Amps.
For best results use the Shield Cup with the torch tip in direct contact with the work (up to 60 Amps).
Standoff Cutting
The preferred method of cutting metal thicker than
6mm and at current levels above 60 Amps. Provides
maximum visibility and accessibility. Use the
single-piece shield cup for ‘standoff’ cutting (with
the torch tip 3mm to 6mm from the work piece).
Use the shield cup body together with the deflector
for extended parts life and improved resistance to
reflected heat. This combination provides cutting
results similar to the single piece shield cup, as well
as easy changeover to gouging or drag shield cutting.
Gouging Profiles
Output
Range
Depth
Width
Tip A
40 Amps
Shallow
(max)
Narrow
Tip B
50 - 100
Amps
Narrow
Tip C
60 - 120
Moderate
Amps
Tip D
60 - 120
Amps
Deep
Shallow
Profile
Moderate
Wide
1Torch, a trademark of Thermal Dynamics Corporation, is registered with the U.S.
Patent and Trademark Office, and is the subject of trademark registrations and pending
applications in numerous other countries. For information on trademark registrations
of Thermal Dynamics Corporation, contact the local trademark offices in the countries
of interest.
Drag Shield Cutting
This is an operator-friendly method of cutting between 70 to 120 Amps while maintaining a constant standoff
distance. For metal thickness greater than 6mm simply drag the shield cap in contact with the work piece.
Use the shield cup body with the appropriate drag shield cap matching the current level being used.
This method is not recommended for cutting light-gauge sheet metal.
Gouging
A simple method of metal removal by angling the torch to a lead angle of 35-45 degrees and using a gouging
tip. While maintaining a constant standoff distance, this allows for only a partial penetration into the work,
thus removing metal from the surface. The amount of current, travel speed, standoff distance, lead angle, and
tip size will determine the amount of material removed and the profile of the gouge.
You can use the shield cup body with either the gouging shield cap or the shield deflector. Also, you can use
the single piece shield cup.
www.thermal-dynamics.com
page 11
Accessories
TORCH CUTTING GUIDES / GUIDE KITS
Cutting Guide Kit (Deluxe)
Cat. No. 7-8910
Cuts circles from 54mm to 1054mm with proper
cutting attachments.
This kit includes easy add-on attachments to fit most
Thermal Dynamics torches for precise straight line,
circle cutting and beveling. Includes Carrying Case,
Radius/Roller Kit (7-7501), Circle Cutting Guide
(7-3291), Magnetic Pivot, Suction Pivot.
Circle Cutting Guide Kit
Cat. No. 7-3291
Cuts 54mm to 705mm circles (using magnetic
attachment) when cutting or beveling
is required. For use with most Thermal Dynamics
torches. Guide shown with optional pivot (7-3148).
Radius / Roller Cutting Guide Kit
Cat. No. 7-7501
This easy-to-use guide cuts circles from 76mm up
to 730mm. Maintains a consistent height off the
work piece whether you are using the circle cutting
attachment for cutting circles or the roller guide
feature to improve your straight-line cutting. Both
novices and experts will see noticeable improvement
in quality, speed, and parts life.
Can be used with most Thermal Dynamics torches.
Straight Line Cutting Guide
Cat. No. 7-8911
Introducing a new cutting guide accessory suitable for all hand
torches. This versatile, straight line cutter is for hand held
systems and it cuts vertical, 90 o or bevel cuts. Its consistent
standoff improves cut quality and maximizes overall
performance. Produces more efficient straight line
cuts.
Lightweight, minimum set up time, and no power
required. Magnetic mounts ensure placement and ease
of use. Optional suction plates available for
non-magnetic applications (i.e. aluminum and stainless
steel). The Cutting Guide Kit includes: 1.2mm standard rail
Torch Holder and Bushing Heavy Duty Magnets (2ea.) Slide
Assembly Wheels and Fasteners. Optional 1.2mm extensions
(7-7971) available.
page 12
CUTMASTER® TRUE Standoff Cutting Guides
Cat. No. 9-8281 (CUTMASTER 12,20,25,35,and40)
New standoff guides designed to fit the SL60 and SL100
torches specific to the CUTMASTER TRUE™ Series
systems. The standoff is preset.
MISCELLANEOUS TORCH ACCESSORIES
Leather Leads Cover
4.6m 9-1258
6.1m 9-1260
7.6m 9-1270
15.2m 9-1280
These leads covers are suitable for both 1Torch® and
SureLok® leads.
Snaps make it easy to install. For wider torches, consider
snapping two covers together width wise.
Trigger Guard Guides
1Torch (SL60 and SL100)
Cat. No. 9-8420 - Short Trigger Guard
Cat. No. 9-8421 - Long Trigger Guard
These guards offer additional protection from accidental
activation or damage to the torch switch.
Remote Pendant Control
Cat. No. 7-3460 - 6.1m
Remote Pendant Control for your mechanized
application.
Hand Pendant Extension
Cat. No. 7-7744 - 7.6m
MISCELLANEOUS ACCESSORIES
ATC ® Lead Extensions
4.6m 7-7544
7.6m 7-7545
15.2m 7-7552
Available for any system using 1Torch with ATC Quick
Disconnect. Leads Extensions enable you to customize
your lead length to suit the cutting job.
AIR FILTER / AIR FILTER KITS
For improved consumable parts life and overall
performance,
Thermal Dynamics recommends Air Filter Kits be used on
all plasma cutting systems.
Welding Gloves
Cat. No. 9-1250
Plasma Cutting Techniques
DVD
Cat. No. 9-1254
Single Stage Air Filter Kit
Cat. No. 7-7507 ( Filter Body 9-7740, Hose 9-7742,
Filter Element 9-7741)
For use with shop compressed air systems, this
in-line filter will not allow moisture or water to
pass through the filter element even if it becomes
completely saturated. This hi-tech filter element
actually blocks the absorption of water to
increase performance and improve consumable
parts life.
PORTABLE GEAR
Multi-Purpose Cart
Cat. No. 7-8888
Designed for most portable manual cutting
systems such as the PakMaster or CUTMASTER ®,
or any similar sized systems.
This rugged steel cart has easy rolling 203m
diameter wheels along with 76mm front mounted
casters. This cart also serves as an excellent
showroom display stand.
www.thermal-dynamics.com
W H E N Y O U N E E D I T.
page 13
Ordering Information
Product Description
Catalog No.
Plasma Cutting Systems
CUTMASTER® 10
with SL60 ® 75° hand torch, 6.1m lead
400V
CE
230V/400V
CE
CUTMASTER® 12
with SL60 75° hand torch, 6.1m lead
1-5130-4
1-5130-7
CUTMASTER® 12
with SL60 75° hand torch, 15.2m lead
1-5131-4
1-5131-7
CUTMASTER® 20
with SL60 75° hand torch, 6.1m lead
1-1130-4
1-1130-7
CUTMASTER® 20
with SL60 75° hand torch, 15.2m lead
1-1131-4
1-1131-7
CUTMASTER® 25
with SL60 75° hand torch, 6.1m lead
1-1330-4
1-1330-7
1-1331-4
1-1331-7
CUTMASTER 25
with SL60 75° hand torch, 15.2m lead
400V
CE
Plasma Cutting Systems
1-4630-4
®
Catalog No.
Product Description
230V
CE
CUTMASTER® 35
with SL100 75° hand torch, 6.1m lead
1-1730-4
1-1730-7
CUTMASTER® 35
with SL100 75° hand torch, 15.2m lead
1-1731-4
1-1731-7
CUTMASTER® 40
with SL100 75° hand torch, 6.1m lead
1-1930-4
1-1930-7
CUTMASTER® 40
with SL100 75° hand torch, 15.2m lead
1-1931-4
1-1931-7
Torch Leads Packages
Hand
SL60 6.1 m Torch/Leads
15.2m Torch/Leads
7-5204
7-5205
SL100 6.1m Torch/Leads
15.2m Torch/Leads
7-5206
7-5208
Selection Guide
Current
Range
Mode Of
Operation
Drag Tip / Cutting
20-40
Amps
Standoff Cutting
Gouging
Drag Tip Cutting
Standoff Cutting
50-60
Amps
Drag Shield Cutting
Gouging
Standoff Cutting
70-100
Amps
Drag Shield Cutting
Gouging
120
Amps
Standoff Cutting
Drag Shield Cutting
Gouging
page 14
Amps
Start
Cartridge
Tip
Shield Cup
9-8205
9-8206
9-8207
9-8205
9-8206
9-8207
9-8208
9-8208
9-8225
9-8218
9-8218
9-8218
60A
9-8252
9-8218
50-55A
60A
50-55A
60A
50-55A
60A
Tip B
Tip C
Tip D
9-8209
9-8210
9-8209
9-8210
9-8209
9-8210
9-8226
9-8227
9-8228
9-8218
9-8218
9-8231
9-8211
9-8212
9-8231
9-8211
9-8212
9-8231
9-8211
9-8212
9-8218
9-8218
9-8218
20A
30A
40A
20A
30A
40A
40A
40A
Tip A
70A
80A
90A-100A
70A
80A
90A-100A
70A
80A
90A-100A
Electrode
9-8215
9-8215
9-8215
9-8213
9-8213
9-8213
Tip B
Tip C
Tip D
120A
120A
Tip E
9-8215
9-8213
230V/400V
CE
Shield Cup
Body
Drag Shield
Cap
Deflector
9-8237
9-8237
9-8237
9-8243
9-8243
9-8243
9-8237
9-8237
9-8243
9-8237
9-8237
9-8237
9-8237
9-8237
9-8237
9-8237
9-8243
9-8243
9-8218
Gouging
Shield Cap
9-8241
9-8237
9-8237
9-8237
9-8237
9-8237
9-8237
9-8226
9-8227
9-8228
9-8237
9-8237
9-8237
9-8253
9-8237
9-8253
9-8254
9-8237
9-8237
9-8235
9-8235
9-8241
9-8241
9-8241
9-8243
9-8243
9-8243
9-8236
9-8236
9-8236
9-8241
9-8241
9-8241
9-8243
9-8258
9-8243
9-8243
9-8241
page 15
141
Typical Applications
Suitable Materials
HVAC, Home Shop Plumbing,
Auto Body Repair
Aluminum, Stainless Steel,
Mild Steel
Start Cartridge
Hand Torch Switch
Gas Flow - L/m
Pilot
Control
Application Information
Air
4.5
Gas
6.1 Manual
Lead Length - m
Gas Pressure - bar
SL60 Hand
24.5
Ship Weight - kg
Torch
Model
17.7
381 x 305 x 610
35% @ 30A
Construction, Maintenance /
Repair, Fabrication
Aluminum, Stainless Steel,
Mild Steel
Start Cartridge
165
4.8
Air
6.1 / 15.2 Manual
SL60 Hand
26.3
19.5
416 x 273 x 572
60% @ 40A
6.1
6.1
Weight - kg
Dimensions - mm
Duty Cycle
Work Cable - m
Input Power
40
400V/8A 3 Ph 50/60Hz
230V/400V 15A/8A 3 Ph 50/60Hz
30
Output Current -Amps
12
15
20
Cutmaster 12
230V/14A
1 Ph 50/60Hz
10
12
16
Cutmaster 10
Cut Capacity (mm) Genuine
Maximum
Severance
System
Model
80
25
30
38
Cutmaster 25
100
35
40
45
Cutmaster 35
120
40
50
55
Cutmaster 40
Start Cartridge
190
5.2
Air
6.1 / 15.2 Manual
SL60 Hand
26.3
19.5
381 x 305 x 610
40% @ 80A
6.1
Construction, Maintenance /
Repair, Fabrication
Aluminum, Stainless Steel,
Mild Steel
Heavy Fabrication,
Manufacturing
Aluminum, Stainless Steel,
Mild Steel
Start Cartridge
212
5.2
Air
6.1 / 15.2 Manual
SL100 Hand
34.9
28.1
381 x 305 x 762
80% @ 100A
6.1
Heavy Fabrication,
Manufacturing
Aluminum, Stainless Steel,
Mild Steel
Hand Torch Switch or Hand Pendant Control
Start Cartridge
190
4.8
Air
6.1 / 15.2 Manual
SL60 Hand
26.3
19.5
381 x 305 x 610
40% @ 60A
6.1
www.thermal-dynamics.com
Heavy Fabrication,
Manufacturing
Aluminum, Stainless Steel,
Mild Steel
Start Cartridge
212
5.2
Air
6.1 / 15.2 Manual
SL100 Hand
34.9
28.1
381 x 305 x 762
80% @ 120A
6.1
400V/16A 3 Ph 50/60Hz
400V/20A 3 Ph 50/60Hz
400V/27A 3 Ph 50/60Hz
400V/32A 3 Ph 50/60Hz
230V/400V 24A/16A 3 Ph 50/60Hz 230V/400V 39A/20A 3 Ph 50/60Hz 230V/400V 45A/27A 3 Ph 50/60Hz 230V/400V 56A/32A 3 Ph 50/60Hz
60
20
25
32
Cutmaster 20
How to Contact Us
Customer Service
UK
Italy +44 1257 224824
+39 0236546801
Website:
www.thermal-dynamics.com www.thermadyne.com
Literature Requests
Product literature, operating manuals, and service manuals are
all available through our distributorships or on our web site. You
can also order directly through Customer Service
Service & Repair
Thermal Dynamics products either meet or exceed industry
standards, and our torches and power supplies are backed with
excellent warranties. With each system or torch, we include
an Operating Manual which contains basic troubleshooting
and parts replacement procedures. Service Manuals are also
available by request to service technicians familiar with high
voltage, high power electronics. Service Manuals cover complex
troubleshooting procedures and include schematics.
A Global Cutting & Welding Market Leader™
WORLD HEADQUARTERS:
Chorley, United Kingdom
Customer Care
Ph: (44) 1257 261755
Fax: (44) 1257 224800
Form No. 9963-2801 16052 Swingley Ridge Road, Suite 300
Milan, Italy
Customer Care
Ph: (39) 0236546801
Fax: (39) 0236546840
Melbourne, Australia
Customer Care
International
Ph: 1300-654-674 613+9474-7508
Fax: 613+9474-7391 613+9474-7488
•
St. Louis, Missouri 63017
Shanghai, China
Sales Office
Ph: 86 21+ 6280-1273
Fax: 86 21+ 3226-0955
© Thermadyne Industries, Inc., 2008
U.S.A.
Roanoke, USA
Customer Care
Ph: (800) 426-1888
Fax: (800) 535-0557
www.thermadyne.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising