8004 1/8 DIN Temperature Controller

8004 1/8 DIN Temperature Controller
Controls
8004
1/8 DIN
Temperature Controller
• SMART Self-Tuning with Fuzzy
Logic
• Heat/Cool Control
• Heater Breakdown Alarm Option
with Indication of Load Current
• Four Outputs
• Soft-Start Power Limiting on
Power Up
• NEMA 4X Faceplate
• RS-485 Digital Communications
with ChromaSoft® Capability
• Three Year Warranty
Features
• Heat/Cool Control Features Selection of
Cooling Medium and Overlap
• Two Independent Run-Idle Setpoints
Switched by Dry Contact
• Heater Breakdown (HB) Alarm/Current
Transformer Input
• Auto/Manual Control
• ChromaSoft® Remote Operator Interface
Software Compatibility
Description
Sophisticated control features include:
The model 8004 controller meets the
application needs of operators with or without
skills in temperature processes and PID
control. SMART self-tuning adjusts automatically and rapidly to all process changes—load
changes, setpoint changes and more.
• Start-up and continuous in-process tuning,
without artificial upset
Control Modes
Alarm Features
Functions
• Auto/Manual Control
Current
Voltage
On/Off, PID
SMART (Autotune)
Manual
Relay or SSR Drive
Relay, 2 Amps, NO. SPST
Output , 2 Amps, NO. SPST
Relay, 2 Amps, NO. SPST
Field Selectable
Input Specifications
Sensor Type
Thermocouple
J
RTD
• Alarm Inhibit
Field Selectable
Outputs
Output #1
–Field Selectable
Output #2
–Cool or Alarm Output
Output #3 (option)
–Alarm
Output #4
–Alarm or Heater
Breakdown Alarm
• Programmed Advanced Alarm Functions for
Each Alarm
• Programmable Ramp on Setpoint Change
• Proven maximum suppression of overshoot.
Specifications
• SoftStart - Timed Output Power Limit on
Start-Up
• Control Output “Turn Off” via Pushbuttons
• Proprietary control algorithm using fuzzy
logic/artificial intelligence concepts
Process, Deviation,
Heater Breakdown, Band
Range* °F
0-1830
0-2190
0-1650
0-2550
0-3200
0-3200
-330 to 1470
K
L
N
R
S
100 Ohm Pt
100 Ohm Pt
0-20mA or 4-20mA dc
0-5, 1-5, 0-10, or 2-10 Vdc,
0-60 or 12-60mVdc
}
°C
0-1000
0.0 to 400.0
0-2100
0-900
0-1400
0-1760
0-1760
-199.9 to +400.0
-200 to +800
Range and decimal points
programmable, -1999 to +4000
*Field Programmable for ˚C or ˚F
Digital Communications
(option)
RS-485 multi-drop, opto-isolated, with selection of CPIF,
ASCII Line or MODBUS/J-BUS Protocols
Instrument Power
100-240 Vac, +10%, -15%, 50-60 Hz, 24 Vac or Vdc
Operating Environment
30-130˚F (0 to 55˚C) ambient with less than 85% relative humidity
H-19
SINGLE CHANNEL
• Universal Inputs: RTD, TC,
Voltage and Current
Controls
8004
Dimensions
1/8 DIN Temperature
Controller (cont’d.)
0.6 max
(15 max)
3.8
(96)
4.6
(116)
1.9
(48)
Side View
Front View
0.5
(12.8)
All Dimensions in Inches (mm)
Ordering Information
Complete the Model Number using the
Matrix provided.
Model
1/8 DIN Temperature Controller
8004
SMART Self-Tuning, 2 Outputs (Heat/Cool or Control/Alarm), Dual 4-Digit Display of
Process and Setpoint, Auto-Manual Control, Programmable Alarms, Option Heater
Breakdown Alarm (#3)/Current Transformer Input, NEMA 4X Faceplate
In Stock:
Model
8004-11130
8004-11230
Code
Output 1 - Heat or Cool
1
Relay, 3 Amps at 240 Vac or
SSR Drive, 14Vdc at 20mA, Jumper Selectable
PCN
306229
306237
Code
Output 2 - Cool or Alarm
1
Relay, 2 Amps at 240 Vac
Code
Options
1
2*
3
4*
Output #3, 2 Amps at 250 Vac (Relative Load)
Heater Break Down Input, Output #3 and Output #4
RS-485 Digital Communications, Output #3 and Output #4
RS-485 Digital Communications, Heater Break Down
Input, Output #3 and Output #4
Code
Power Supply
3
5
100/240 Vac
24 Vac/Vdc
Code
8004 -
1
1
2
3
0
Add to complete model number
0
Typical Model Number
Accessories
*Controllers with the Heater Break Down option, model 1604-xx2xx and 1604-xx4xx require a
Current Transformer to monitor the load current controlled by the 1604 controller. Specify one of
the four Current Transformers listed below when ordering a controller with the Heater Break
Down option.
Part No.
PCN
Current Transformer, for 0.0-10.0 Amp Load Current
0149-01340
306480
Current Transformer, for 0-25 Amp Load Current
0149-01341
306350
Current Transformer, for 0-50 Amp Load Current
0149-01342
306368
Current Transformer, for 0-100 Amp Load Current
0149-01343
306376
ChromaSoft® Remote Operator Interface Software
SOFT-12000
—
H-20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising