Simrad | StructureScan 3D | Installation manual | Lowrance StructureScan 3D Installation Manual

Lowrance StructureScan 3D Installation Manual
Dimensions
204 mm (8.03")
57 mm (2.24")
169 mm (6.63")
For technical specifications and
declarations, refer to the product
website on:
StructureScan®3D
Installation Guide
12V/24V 3A
POWER
NET-1
NET-2
NET-3
207 mm
(8.15")
91 mm
(3.58")
TRANSDUCER1
lowrance.com
180 mm
(7.09")
TRANSDUCER2
*988-10970-001*
183 mm (7.20")
Mounting
NET-3
5
NET-2
4
NET-1
3
12V/24V 3A
2
POWER
Parts included
6
TRANSDUCER1
TRANSDUCER2
DESCRIPTION
1 StructureScan® 3D module
2 Installation screws
12V/24V 3A
NET-2
NET-3
12V/24V 3A
POWER
NET-1
NET-2
NET-3
TRANSDUCER1
NET-2
4 Power cable, 2 m (6.6 ft)
TRANSDUCER2
TRANSDUCER1
TRANSDUCER2
12V/24V 3A
TRANSDUCER2
TRANSDUCER1
POWER
NET-1
5 Fuse and Fuse holder
6 StructureScan® 3D Transducer (Optional)
NET-3
NET-1
3 Ethernet cable, 4 m (15 ft)
POWER
1
simrad-yachting.com
Power
Wiring example
Power controlled by External Switch
Power controlled by Multi-Function Display
Multi-Function Displays
4G Radar
To Multi-Function
Display
Blue
(n/c)
Power
Control bus
NET-3
12 / 24 V DC
+ _
NET-2
+_
Blue
(n/c)
Yellow
NET-1
Switch
Blue
(n/c)
Red
12V/24V 3A
Red
Yellow
Black
POWER
Black
Black
Red
Yellow
StructureScan® 3D Module
12 / 24 V DC
12/24 V DC
TRANSDUCER1
TRANSDUCER2
12V/24V 3A
POWER
NET-1
NET-2
12V/24V 3A
NET-3
POWER
NET-1
NET-2
NET-3
StructureScan® 3D Transducer
TRANSDUCER1
TRANSDUCER2
TRANSDUCER1
TRANSDUCER2
Connectors and LEDs
Transducer connection
NET-3
12V/24V 3A
POWER
NET-1
NET-2
NET-3
2
TRANSDUCER1
TRANSDUCER2
3
3
3
Power
Structure Scan
3D transducer
NET-2
Ethernet
NET-1
1
12V/24V 3A
2
CONNECTORS
POWER
ID
1
LEDs
OFF
No connection
ON/FLASHING - Green
Connected and ok
OFF
No power
ON - Red
System starting
ON - Green
System operating
FLASHING Red/Green
Software error - restart
unit
OFF
Sounder not operating
FLASHING (every second) Green
Searching for bottom
signal
ON
Operational system with
bottom signal detected
TRANSDUCER1
StructureScan® 3D Transducer cable 1
to
Transducer 1 Connector
TRANSDUCER2
StructureScan® 3D Transducer cable 2
to
Transducer 2 Connector
Ensure both StructureScan® 3D transducer cables
are connected to the StructureScan® 3D Module correctly
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising