W2-CO-10XT
W2-CO-10XT
Wireless Carbon Monoxide Alarm with 10 Year Lithium Battery
Wireless Interlink
10 year sealed in power pack
removes the need to replace the batteries
Height 94mm
Width 114mm
Depth 39.5mm
Weight 186g
Common features
Sealed for life, tamper resistant, 10 year
lithium battery.
No fuss - quick and simple installation.
Single pin fitting option.
Mixed system compatibility:
• Wireless and hardwired*.
• AC and DC.
Wirelessly interlink up to 50 Wi-Safe 2 smoke, heat, CO alarms and accessories on a single network.
Resistant to false alarms caused by normal household contaminants.
End of life indication.
*When used in conjunction with at least one other wireless alarm
on a hardwired network.
EN 50291-1:2010
EN 50291-2:2010
KM 551504
Technical specification
Supply voltage
3V DC sealed lithium battery
Alarm sound level
85dB (A) at 3m (minimum)
Technology
Wi-Safe 2
Installation positions
Wall / Freestanding
Operating humidity
30% to 90% RH non-condensing
Operating temperature
Storage temperature
Storage humidity
Plastic material
Warranty
Master pack quantity
Approvals
Operating Frequency
Max No. of connected
units (network)
Networking
Range
Wi-Safe 2 module contained within W2-CO-10XT
independently tested to RF standard ETSI EN 300 220-2 V2.3.2 (2010-02) by TRaC Global Ltd
EN300489-1 &-3 / EN300220-2 - Radio
FOR FURTHER INFORMATION OR SALES ENQUIRIES:
Tel +44 (0) 2477 717 700 Email sales@sprue.com Website sprue.com
-10°
C to 40°
C
-20°
C to 60°
C
30% to 90% RH non-condensing
UL94 V0 Flame Retardant
5 years
4
BS EN 50291-1 & 2: 2010 / CE /
ETSI EN 300 220-2 V2.3.2 (2010-02) /
EN300489-1 &-3 /
EN300220-2 - Radio
868 MHz
50 units
Multi-directional communication
35m (over 200m in clear air)
W2-CO-10XT
Wireless Carbon Monoxide Alarm with 10 Year Lithium battery
■The carbon monoxide alarm is certified to
BS EN50291-1: 2010 and BS EN50291-2: 2010. It carries
the CE mark to indicate conformance to Low Voltage and
Electromagnetic Compatibility Directives.
■Electrochemical sensing – Incorporating an advanced
■The W2-CO-10XT is capable of working on a mixed system
to include hardwire and wireless, AC and DC alarms
within the FireAngel product family. On a mixed network
of alarms (CO, smoke and heat), all alarms will sound a CO
alarm pattern upon detection of CO.
electrochemical sensor designed to accurately measure
levels of carbon monoxide (CO) and provide an early
warning.
■The alarm has a built in sounder giving a minimum sound
■10 year sealed for life lithium battery will power the unit in
silence button to test circuitry, sensor and sounder; and
activate all interconnected alarms in the system.
normal operation for a period of 10 years.
■The alarm incorporates a Wi-Safe 2 intelligent
communication module which wirelessly interlinks with
up to 50 other units with Wi-Safe 2 technology inside on
a single network. All units should have the ability to be
learnt into a single network by an easy two button test
procedure.
■The wireless Wi-Safe 2 module has a separate 10 year
lithium battery designed to outlast the usable life of
the alarm.
output of 85dB (A) at 3m.
■The alarm incorporates a large central concave test/
■The alarm incorporates superior diagnostics functionality
which monitors alarm activations and facilitates fault
finding.
■The alarm has an end of life indication.
■The alarm has cutting edge design style and fits
seamlessly into the modern home environment.
■The alarm comes complete with installation and user
instructions.
■Wi-Safe 2 radio frequency is 868 MHz band in accordance
■The alarm has the following dimensions:
■Units are automatically “House Coded” together on a
■The alarm has a 5 year warranty.
with R&TTE Directive 1999/5/EC.
unique network in order to eliminate the risk of adjacent
properties communicating with each other. After
House Coding they will only communicate with other
units coded at the same time. Additional units can be
retrospectively added to individual networks at a later
date if required.
94 x 114 x 39.5mm.
■The alarm is supplied with an integral flip down bracket
and can be fitted securely to the wall either with screws
or a single pin fitting option for rapid installation. The unit
is also capable of free standing for flexible installations
around a property.
■
An optional tamper resistant function where required
can securely lock the alarm into place after installation
and thereafter the alarm can only be removed with a tool.
■The alarm has a low battery warning signal, which bleeps
every 45 seconds for at least 30 days to indicate when
replacement of the alarm is required. All other alarms on
the network will also emit an audible low battery chirp
once every 4 hours. This will continue until the alarm
which has the low battery condition is replaced.
■The alarm incorporates “Sleep Easy” functionality
whereby a low battery chirp can be silenced for a period
of 8 hours by pressing the test button on the smoke/heat
alarm. This function can be used up to 10 times.
FOR FURTHER INFORMATION OR SALES ENQUIRIES:
Tel +44 (0) 2477 717 700 Email sales@sprue.com Website sprue.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising