C32 ACERT™ Petroleum Engine

C32 ACERT™ Petroleum Engine
C32 ACERT™
Petroleum
Engine
597-914 bkW
(800-1225 bhp)
2100 rpm
Wet Manifold
CAT® ENGINE SPECIFICATIONS
Image is a representation only, and
may show optional attachments.
V-12, 4-Stroke-Cycle-Diesel
Emissions.. . . . . EPA and CARB Non-Road Mobile Tier 2,
EPA Marine Tier 2, IMO Tier II
Peak Torque at Speed.. . . . . . . . . . . . . . . . . . . . . . 3064 lbs-ft
Bore.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 mm (5.7 in)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 mm (6.4 in)
Displacement.. . . . . . . . . . . . . . . . . . . . 32.1 L (1960.5 cu. in)
Aspiration.. . . . . . . . . . . . . . . . . . . Turbocharged-Aftercooled
Governor and Protection.. . . . . . . Electronic (ADEM™ A4)
Engine Weight, net dry (approx). . . . . . . . 2306 kg (5084 lb)
Capacity for Liquids
Lube Oil System (refill).. . . . . . . . . . . . . . . . . 72 L (19 gal)
Cooling System.. . . . . . . . . . . . . . . . . . . . . . 55 L (14.5 gal)
Oil Change Interval.. . . . . . . . . . . . . . . . . . . . . . . . . . 250 hours
Rotation (from flywheel end). . . . . . . . . . Counterclockwise
Flywheel and Flywheel
Housing.. . . . . . . . . . . . . . . . . . . . SAE No. 0 or SAE No. 1
Flywheel Teeth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
FEATURES
Engine Design
- Proven reliability and durability
- Robust diesel strength design prolongs life and lowers
owning and operating costs
- Broad operating speed range.
- PTO drive options provide flexible access to auxiliary
power for pumps and other needs
Optional Attachments
SCAC HEX — allows for sea watercooling capabilities
Advanced Digital Engine Management
ADEM A4 engine management system integrates speed
control, air/fuel ratio control and ignition/detonation
controls into a complete engine management system
with integrated digital ignition, engine protection and
monitoring.
Transmissions
Caterpillar has a full line of engine-transmission packages
that can be fully integrated with your axle, hydraulics, and
operator interface. Cat® transmissions deliver continuous
operation under full load, smooth shifting at any speed,
and maximum up time, with unmatched durability and
easy maintenance.
Custom Packaging
For any petroleum application, trust Caterpillar to meet
your exact needs with a factory custom package. Cat
engines, generators, enclosures, controls, radiators,
transmissions — anything your project requires — can be
custom designed and matched to create a one-of-a kind
solution. Custom packages are globally supported and
are covered by a one-year warranty after startup.
Testing
Every engine is full-load tested to ensure proper engine
performance.
Product Support Offered Through Global Cat Dealer
Network
More than 2,200 dealer outlets
Cat factory-trained dealer technicians service every
aspect of your petroleum engine
Cat parts and labor warranty
Preventive maintenance agreements available for repairbefore-failure options
S•O•SSM program matches your oil and coolant samples
against Caterpillar set standards to determine:
- Internal engine component condition
- Presence of unwanted fluids
- Presence of combustion by-products
- Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable products.
- Cast engine blocks, heads, cylinder liners, and flywheel
housings
- Machine critical components
- Assemble complete engine
Web Site
For all your petroleum power requirements, visit .
www.catoilandgas.cat.com.
Full Range of Attachments
Large variety of factory-installed engine attachments
reduces packaging time
LEHW0050-01
Page 1 of 4
ACERT™
PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
standard equipment
Air Inlet System
Connections configured for SCAC and ATAAC (Air-to-Air-
Aftercooled) or remote heat exchanger
Control System
ADEM A4 electronic control module
Electronic governing, PTO speed control.
Customer programmable ratings
Cold mode start strategy.
Automatic altitude compensation
Automatic fuel temperature compensation
Programmable low and high idle.
Electronic diagnostics and fault logging.
Engine monitoring system
SAE J1939 broadcast (diagnostic and engine status)
Cooling System
Gear-driven centrifugal jacket water pump — RH
Integrated thermostat and housing.
Engine oil cooler
Optional installed transmission oil cooler.
Optional aftercooler and auxiliary water pump.
Optional jacket water heat exchanger
Exhaust System
Exhaust manifold — watercooled
Fuel System
MEUI.
Fuel priming pump.
Fuel transfer pump.
Primary and secondary fuel filter — RH configured for
remote mounting (installed RH on shipping plate) .
OPTIONAL ATTACHMENTS
Air Compressors
Air Inlet System
Air cleaner
Air inlet adapters
Turbocharger outlet adapters
Air lines
Charging System
Battery chargers
Charging alternators
Alternator mounting
Circuit breakers and mountings
Cooling System
Dry charge coolant conditioners
Thermostat housing
Coolant level sensor
Radiator
Blower fans
Suction fans
Fan adapters
Fan drives
Emissions
IMO certifications
Exhaust System
Elbows
Mufflers
Fuel Systems
Electric fuel priming pump
LEHW0050-01
Flywheels and Flywheel Housing
SAE No. 0 or SAE No. 1 flywheel iron housing.
SAE No. 0 or SAE No. 1 flywheel.
Optional transmission adapter
Lube System
Crankcase breather.
Oil filter — RH standard, optional LH or remote.
mount service.
Oil level gauge — RH standard, optional LH or.
dual service.
Oil filler — RH standard, optional LH or dual service.
Shallow oil pan, rear sump
Mounting System
Trunnion front support.
Vertical and horizontal pads on rear flywheel housing
Protection System
24 volt electronic.
Engine overspeed with optional air shut-offs with .
indicators.
Low engine oil pressure.
Fuel filter restriction.
Fuel temperature.
High engine coolant temperature.
Low engine coolant temperature
General
Vibration damper.
Lifting eyes.
Optional customer wiring connector.
Service tool connector.
Paint — Cat yellow.
Optional two-part primer and mastic caulk
Instrumentation
Customer management device
Interconnect harness
Gauges and instrument panels
Lube System
Oil pans
Oil service side
Oil level gauge
Oil filters
Lubricating oils
Mounting System
Structural steel base
Engine support — front
Engine support — rear
Power Take-Offs
Auxiliary drive
Damper pulley
Hydraulics gear pumps
Protection System
Mechanical shutoffs
Solenoid shutoffs
Starting System
Electric starting motors – 12V, 24V
Battery sets – 24V
Battery cable
Battery rack
Starting aids
Transmission Arrangement
Transmission water lines
Transmission cooler
Page 2 of 4
C32 ACERT™
PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
PERFORMANCE curves
2766
2040
1611
1188
828
1110
586
785
343
461
101
136
220
.361
216
.356
213
.351
210
.346
BSFC
g/bkW-hr
Engine Power
bkW
2891
600
BSFC
lb/bhp-hr
3743
3920
Engine Power
bhp
5075
Torque
lb-ft
Torque
N•m
Turbocharged-Aftercooled
D Rating — 828 bkW (1110 bhp) @ 2100 rpm*
DM9685-00
800 1000 1200 1400 1600 1800 2000 2200
Engine Speed - rpm
Heat Rejection Data
Engine Speed
rpm
Engine Power
bkW
bhp
Rej to JW
bkW
Btu/min
Rej to Atmos
bkW
Btu/min
Rej to Exh
bkW
Btu/min
From Aft Clr
bkW
Btu/min
2100
827.7 1110.0
549
31222
168
9554
582
33098
166.0
9440.4
1900
827.8
1110.1
514
30767
142
8076
566
32188
143.0
8132.4
1700
817.8
1096.7
535
30425
122
6938
567
32245
119.0
6767.5
1500
767.0
1028.6
552
31392
138
7848
558
31733
95.0
5402.6
1300
690.3
925.7
541
30767
146
8303
508
28890
60.0
3412.2
1100
307.9
412.9
289
16435
105
5971
217
12341
4.0
227.5
800
179.4 240.6
143
8132
103
5858
112
6369
N/A
N/A
*Other engine ratings are available. Please contact dealer for performance data.
LEHW0050-01
Page 3 of 4
C32 ACERT™
PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
PETROLEUM ENGINE
1933 mm
76.1 in
1488 mm
57 in
1389 mm
54.7 in
Right Side View
Front View
Engine Dimensions
Length 1933 mm 76.1 in
Width 1488 mm 57 in
Note: Do not use for installation design. See
general dimension drawings for detail
(Drawing #310-1652).
Height 1389 mm 54.7 in
Engine Weight (dry)
2306 kg
5084 lb
RATING definitions and CONDITIONS
Engine Performance is corrected to inlet air standard
conditions of 99 kPa (29.31 in Hg) dry barometer and
25°C (77°F) temperature. These values correspond to
the standard atmospheric pressure and temperature as
shown in SAE J1995.
The corrected performance values shown for Cat engines
will approximate the values obtained when the observed
performance data is corrected to SAE J1995, ISO 3046-2,
ISO 8665, ISO 2288, ISO 9249, ISO 1585, EEC 80/1269,
and DIN 70020 standard reference conditions.
Performance measured using a standard fuel with fuel
gravity of 35 degrees API having a lower heating value of
42,780 kJ/kg (18,390 BTU/lb) when used at 29°C (84.2°F)
where the density is 838.9 g/L (7.001 lb/U.S. gal).
IND-D
For service where maximum power is required for
periodic overloads.
Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, ACERT, ADEM, S•O•S, “Caterpillar Yellow” and the “Power Edge” trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Performance Number: DM9685-00
LEHW0050-01 (11-10)
©2010 Caterpillar
All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising